Scribd
Upload
36 views

How To Make Bootable Flash Drive: Requirements

The document provides instructions for making a bootable flash drive and reformatting a PC. To make a bootable flash drive, the instructions list requirements of a 4GB or larger flash drive and Windows OS, then steps such as using diskpart commands to clean and format the flash drive, and copy an extracted OS file to it. To reformat a PC, requirements include a bootable OS on a DVD or flash drive, programs installer, and backup. The procedure involves booting from the external media, selecting custom installation in the Windows setup, deleting and creating new partitions, and completing installation before changing the BIOS boot priority back to the hard drive.

Uploaded by

Elixa Hernandez
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
36 views

How To Make Bootable Flash Drive: Requirements

The document provides instructions for making a bootable flash drive and reformatting a PC. To make a bootable flash drive, the instructions list requirements of a 4GB or larger flash drive and Windows OS, then steps such as using diskpart commands to clean and format the flash drive, and copy an extracted OS file to it. To reformat a PC, requirements include a bootable OS on a DVD or flash drive, programs installer, and backup. The procedure involves booting from the external media, selecting custom installation in the Windows setup, deleting and creating new partitions, and completing installation before changing the BIOS boot priority back to the hard drive.

Uploaded by

Elixa Hernandez
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

How to make BOOTABLE FLASH DRIVE

Requirements
1. FLASH DRIVE at least 4GB
2. OS (SERVER 2008 or WINDOWS 7)
3. WinRar or 7-zip
Procedure:
1. Open CMD
2. Type DISKPART
3. Type LIST DISK
4. Type SELECT DISK 1
5. Type CLEAN
6. Type CREATE PARTITION PRIMARY
7. Type SELECT PARTITION 1
8. Type FORMAT FS=NTFS QUICK
9. Type ACTIVE
10. Type EXIT
11. COPY-PASTE the extracted OS File

How to REFORMAT PC
Requirements:
1. Bootable OS (DVD or Flashdrive)
2. Programs Installer
3. Drivers
4. Backup
Procedure:
1. Turn off PC
2. Insert bootable OS (dvd or flash drive)
3. Enter to BIOS SETUP utility (by continuously pressing Delete or F2)
4. Go to BOOT settings or BOOT tab
5. Change BOOT DEVICE PRIORITY
1st USB KEY or Flash Drive / CD or DVD drive
2nd Hard disk Drive
6. Save and Reboot
7. Press any key (if required)
8. Follow Windows setup
9. Select Architecture (x64 or x86)
10. Select Custom Installation
11. DELETING PARTITION
12. CREATING PARTITION
13. Wait until 100%
14. Preparing to restart
15. Enter to BIOS SETUP utility (by continuously pressing Delete or F2)
16. Go to BOOT settings or BOOT tab
17. Change BOOT DEVICE PRIORITY
1st Hard disk Drive
2ND USB KEY or Flash Drive / CD or DVD drive
18. Save and Reboot
19. Waiting
20. Complete the installation

You might also like