Scribd Logo
Upload

Welcome to Scribd!

  • 95 views

    Niclal 38, Cumn10Ni4: (Shunt Grade)

    Uploaded by

    Marcel Kuhne
    Niclal 38 is a precision resistance alloy composed of 86% copper, 10% manganese, and 4% nickel. It has moderate resistivity, low temperature coefficient of resistance, and low thermal EMF versus copper. Niclal 38 is well-suited for precision resistors and electrical shunts due to its high stability of electrical resistance, good workability, and weldability. It is available as wire, rods, strip, and cut lengths for applications requiring control and measurement of electric current.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Niclal 38, Cumn10Ni4: (Shunt Grade)

    Uploaded by

    Marcel Kuhne
    95 views2 pages
    Niclal 38 is a precision resistance alloy composed of 86% copper, 10% manganese, and 4% nickel. It has moderate resistivity, low temperature coefficient of resistance, and low thermal EMF versus copper. Niclal 38 is well-suited for precision resistors and electrical shunts due to its high stability of electrical resistance, good workability, and weldability. It is available as wire, rods, strip, and cut lengths for applications requiring control and measurement of electric current.

    Original Title

    38 and NICLAL 38

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Niclal 38 is a precision resistance alloy composed of 86% copper, 10% manganese, and 4% nickel. It has moderate resistivity, low temperature coefficient of resistance, and low thermal EMF versus copper. Niclal 38 is well-suited for precision resistors and electrical shunts due to its high stability of electrical resistance, good workability, and weldability. It is available as wire, rods, strip, and cut lengths for applications requiring control and measurement of electric current.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    95 views2 pages

    Niclal 38, Cumn10Ni4: (Shunt Grade)

    Uploaded by

    Marcel Kuhne
    Niclal 38 is a precision resistance alloy composed of 86% copper, 10% manganese, and 4% nickel. It has moderate resistivity, low temperature coefficient of resistance, and low thermal EMF versus copper. Niclal 38 is well-suited for precision resistors and electrical shunts due to its high stability of electrical resistance, good workability, and weldability. It is available as wire, rods, strip, and cut lengths for applications requiring control and measurement of electric current.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Niclal 38 (Shunt Grade), CuMn10Ni4

    Identification
    VMI No. 38
    UNS No. n/a
    Relevant Specifications
    Similar to Alloy 38, , CuMn10Ni4, Niclal 37
    Strip Wire Bar Sheet
    Forms
    ∗ ∗ ∗ ∗
    Description Niclal 38 is a precision resistance alloy, with
    moderate Resistivity, low Temperature
    coefficient of resistance and low thermal EMF
    versus Copper. With high stability of electrical
    resistance, good working properties and very
    Niclal 38

    good weldability, Alloy 38 is specially dedicated


    to precision resistors and electrical shunts.

    Chemical Composition (%)


    Copper 86 Nominal
    Manganese 10 Nominal
    Nickel 4 Nominal
    Mechanical Properties (all values are for annealed temper; not intended for specification)
    Tensile 55 ksi
    380 MPa
    Yield 29 ksi
    200 MPa
    Elongation 30 % in 2"
    30 % in 50mm
    Hardness 50 HRB
    90 Hv
    Physical Properties
    Density 0.3071 lb/in³
    8.497 g/cm³
    Resistivity (Nominal) 230 Ohm•circ mil/ft
    38 microOhm•cm
    Coefficient of Thermal Expansion 212°F 392°F 572°F 752°F 932°F
    from 68°F (20°C) to 100°C 200°C 300°C 400°C 500°C
    (micro-in/in-°F) ----- ----- ----- ----- -----
    (micro-m/m-K) ----- ----- ----- ----- -----

    www.vismet.com
    65 Ballou Blvd Bristol, RI 02809
    401-253-1772 1-800-431-4113 fax: 401-253-1806
    Cu Mn10 Ni4
    DESCRIPTION

    Niclal 38 is a precision resistance alloy, with moderate


    Brand Name NICLAL 38 Resistivity, low Temperature coefficient of resistance and low
    thermal EMF versus Copper.
    Abbreviation Cu - Mn - Ni With high stability of electrical resistance, good working
    Nominal analysis properties and very good weldability,
    Cu % Mn % Ni % Niclal 38 is specially dedicated to precision resistors, electrical
    shunts which control and measure the current through devices
    Remain 10 4 such electricity meters or
    DC ammeters.

    Electrical Properties in annealed temper

    Electrical Resistivity at 20 °C 38 µohm x cm


    Temperature Coefficient of Electrical Resistance
    between -20 and +150 °C +/- 20 ppm/°C
    Thermo EMF against Copper at 20 °C - 1.02 µV/°C

    Physical Properties

    Density at 20 °C 8.77 g/cm3


    Thermal conductivity at 20 °C 22 W/m x °K
    Coefficient of thermal expansion at 20 °C 18 x 10-6 / °C

    Forms manufactured

    Wire (annealed temper) diameter : 0.8 mm to 14 mm


    Rods (1/4 hard temper) diameter : 1 mm to 19 mm
    Strip thickness : 0.08 mm to 3.5 mm
    width : 3 mm to 380 mm
    Cut to length thickness : 0.25 mm to 3.5 mm
    width : 20 mm to 380 mm
    length : 500 mm to 3500 mm

    Resistance Change vs. Temperature - NICLAL 38


    1,00%
    0,80%
    0,60%
    P e rce n t C h a n g e in

    0,40%
    R e s is ta n ce

    0,20%
    0,00%
    -0,20%
    -0,40%
    -0,60%
    -0,80%
    -1,00%
    -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

    Temperature °C

    PDF créé avec la version d'essai pdfFactory www.gs2i.fr/fineprint/pdffactory.htm

    You might also like