Scribd
Upload
207 views4 pages

Windows 10 Installatin Part1

The document provides step-by-step instructions for booting to the Windows 10 installer: 1. Make sure the Windows 10 installation media is connected and inserted into the computer. 2. Open the Start menu and click the power icon to restart the computer. 3. During restart, press the designated key like Del or F2 to enter the computer's BIOS setup utility.

Uploaded by

Aamir Khalil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
207 views4 pages

Windows 10 Installatin Part1

The document provides step-by-step instructions for booting to the Windows 10 installer: 1. Make sure the Windows 10 installation media is connected and inserted into the computer. 2. Open the Start menu and click the power icon to restart the computer. 3. During restart, press the designated key like Del or F2 to enter the computer's BIOS setup utility.

Uploaded by

Aamir Khalil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

PAGE#1

Part 1
Booting to the Windows 10 Installer
1.

1
Make sure your Windows 10 installation media is connected. In order for you to
install Windows 10, your Windows 10 installation file must be loaded onto a disc or
flash drive, and the disc or flash drive must be inserted into your computer.
 If you haven't yet downloaded the Windows 10 installation tool, follow
the instructions from this Microsoft support
page: https://www.microsoft.com/en-us/software-download/windows10
2.

2
Open the Start menu. Either click the Windows icon in the bottom-left corner of the
screen, or press the ⊞  Win  key.
3.

3
Click the power icon. This is the circle with a line through its top that's in the bottom-
left corner of the Start window.
4.

4
1
PAGE#1

Click Restart. It's in the pop-up menu above the power icon. Doing so will restart your
computer.
5.

5
Press and hold  Del  or  F2  to enter setup. This key may also be a different key—
most computers will display a message on startup that says "Press [key] to enter setup"
or something similar, so look for this message when your computer restarts to confirm
the key you should press to access the BIOS.
 Consult your computer's manual or online support page to confirm your
computer's BIOS key.
6.

6
Navigate to the Boot tab. You'll use the arrow keys to select it.
 The Boot tab may instead say Boot Options, depending on your
computer's manufacturer.
7.

7
Select a device from which to boot. You have a couple of options here:
 For a USB flash drive, select the Removable Devices option.
 For a disc installation, select the CD-ROM Drive option.
8.

2
PAGE#1

8
Press the  +  key until your boot option is first. Once either Removable
Devices or CD-ROM Drive is at the top of the list, your computer will select your
choice as its default boot option.
 On some computers, you'll instead press one of the function
keys (e.g.,  F5 ) to navigate an option up to the top of the menu. The
key will be listed on the right side of the screen.
9.

9
Save your settings. You should see a key prompt (e.g.,  F10 ) at the bottom of the
screen that correlates to "Save and Exit"; pressing it should save your settings and
restart your computer.
 You may have to press ↵  Enter  to confirm the changes.
10.

10
Wait for your computer to restart. Once your computer finishes restarting, you'll see
a window here with your geographical data. You're now ready to begin setting up your
Windows 10 installation.

3
PAGE#1

You might also like