1 Tag Number 112-XV-0102

1
2 Service BV-101 Outlet quick opening Actuated On-Off valve
3 Location Equipment System Field DCS
4 Line number P&ID NA B99-DEPL-357-A
GENERAL
5 Ambient temperature Min Max 13 Deg C 45 Deg C
6 Avail air supply press Min Max 4kg/cm2 10Kg/cm2
7 Power, Signal loss Pneu Supply Failure Position Closed Closed
8 NACE Requirement IBR Certification No No
PIPE 9 Line Size Schedule 2" 160S
10 Fluid name Fluid state Chlorosilane vapors Vapors
11 Corrosive Erosive Toxic Yes No No
PROCESS 12 PROCESS DESIGN CONDITIONS Units Minimum Normal Maximum
13 Design Pressure kg/cm2g 3.5
CONDITION 14 Design Temperature Deg C 240
15 OPERATING CONDITIONS Units @ Min. Flow @ Norm. Flow @ Max. Flow
16 Flow Rate M3/Hr 848
17 Inlet Pressure kg/cm2g 2.1
18 Inlet Temperature Deg C 135
19 Body type 2 piece,Floating design
20 Bonnet style Standard LOCAL 48 Indicator style Mechanical (Open/Close)
21 Body size 50 NB POSITION 49 Indicator colors Yellow/Red
INDICATOR
BODY 22 Conn size I TypeI Rating ASME 300RF
AND 23 Face-to-face std ASME B16.10
BONNET 24 Packing material PTFE
25 Body and bonnet matl WCB
26
27 Closure member type Ball
28 Trim size Full Bore 49 Body type Reset type 3/2-way Auto
29 Seat leakage class IV 50 Enclosure type Exia rated IP 67,Weather proof
1
30 Flow direction force Bi-Directional 51 Inlet conn size 1/4" NPT F
VALVE 31 Stem extension length 100mm SOLENOID 52 Signal power source 24 VDC
32 Plug/ Ball/ Disk material SS316+ENP VALVE 53 Mounting location Valve mounted
33 Seat material SS316+Stellited 54 Body material Aluminium
34 Shaft material 17-4PH 55 Certification/Approval CCOE
35 56 Electrical Connection 1/2"NPT (F)
36 Actuator type Rack & Pinion, Spring return 57 Make Rotex
37 Acting style Single 58 Model I3003-6-2R-24VDC-67NS-H
1
38 Handwheel type/Lct No 59 Housing type Exia rated IP65,Weatherproof
39 Mounting orientation Parallel to Pipeline 60 Sensor Style Proximity
40 Casing/Cylinder matl Aluminium alloy Hard Anodized 61 Mounting Location Valve
41 Diaphragm/O ring matl NBR 62 Contact rating 8VDC,3mA,NC 1
42 Opening time <6 sec SWITCHES 63 Switching positions Qty : 2 nos. Full Open & Closed 1 NO & 1 NC
43 Closing time <6 sec 64 Electrical Connection 1/2" NPT (F)
44 Air connection size 1/4" BSP 65 Certification/Approval CCOE
ACTUATOR
45 Require Torque 187.8NM 66 Enclosure Make Model Rotex DXLW 3A2-4R
1
46 Make Rotex 67 Switches make Model P&F NJ2-V3-N
47 Model QTF 150E 10
1
1 68 Filter type 5 micron
AIR FILTER 69 Air set gauges 4 kg/cm2
REGULATOR 70 Make Shavo
71 Model 11-4SN-201M-M6KA-NB

TESTS 72 Standard hydro-pneumatic test BS:6755-1EN-12266-1(BS:6755-1)

1 7/9/2016 ISSUED FOR PURCHASE PM KF LV

0 10/8/2016 ISSUED FOR PURCHASE PM KF LV
Rev Date DESCRIPTION BY CHK APP PROJ CLIENT
Proj No: DEPL-357-A
ACTUATED ON/OFF VALVE
E01-DEPL-357-ABV-A
Location Rajnandgaon, Chhattisgarh, India
Diva Envitec Pvt Ltd.(DEPL) Client Lanco Solar Pvt.Ltd

Comment applicable for all valves

Actuator Color:
Green : For Fail-Close Action.
Red: For Fail-Open Action.
 1 Tag Number 112-XV-0103
1
2 Service BV-104 Outlet quick opening Actuated On-Off valve
3 Location Equipment System Field DCS
4 Line number P&ID NA B99-DEPL-357-A
GENERAL
5 Ambient temperature Min Max 13 Deg C 45 Deg C
6 Avail air supply press Min Max 4kg/cm2 10Kg/cm2
7 Power, Signal loss Pneu Supply Failure Position Closed Closed
8 NACE Requirement IBR Certification No No
PIPE 9 Line Size Schedule 2" 160S
10 Fluid name Fluid state Chlorosilane vapors Vapors
11 Corrosive Erosive Toxic Yes No No
12 PROCESS DESIGN CONDITIONS Units Minimum Normal Maximum
13 Design Pressure kg/cm2g 3.5
PROCESS
14 Design Temperature Deg C 240
CONDITION
15 OPERATING CONDITIONS Units @ Min. Flow @ Norm. Flow @ Max. Flow
16 Flow Rate M3/Hr 848
17 Inlet Pressure kg/cm2g 2.1
18 Inlet Temperature Deg C 135
19 Body type 2 piece,Floating design
20 Bonnet style Standard LOCAL 48 Indicator style Mechanical (Open/Close)
21 Body size 50 NB POSITION 49 Indicator colors Yellow/Red
INDICATOR
BODY 22 Conn size I TypeI Rating ASME 300RF
AND 23 Face-to-face std ASME B16.10
BONNET 24 Packing material PTFE
25 Body and bonnet matl WCB
26
27 Closure member type Ball
28 Trim size Full Bore 50 Body type Reset type 3/2-way Auto
29 Seat leakage class IV 51 Enclosure type Exia rated IP 67,Weather proof
1
30 Flow direction force Bi-Directional 52 Inlet conn size 1/4" NPT F
VALVE 31 Stem extension length 100mm SOLENOID 53 Signal power source 24 VDC
32 Plug/ Ball/ Disk material SS316+ENP VALVE 54 Mounting location Valve mounted
33 Seat material SS316+Stellited 55 Body material Aluminium
34 Shaft material 17-4PH 56 Certification/Approval CCOE
35 57 Electrical Connection 1/2"NPT (F)
36 Actuator type Rack & Pinion, Spring return 58 Make Rotex
37 Acting style Single 59 Model I3003-6-2R-24VDC-67NS-H 1
38 Handwheel type/Lct No 60 Housing type Exia rated IP65,Weatherproof
39 Mounting orientation Parallel to Pipeline 61 Sensor Style Proximity
40 Casing/Cylinder matl Aluminium alloy Hard Anodized 62 Mounting Location Valve
41 Diaphragm/O ring matl NBR 63 Contact rating 8VDC,3mA,NC
1
42 Air connection size 1/4" BSP SWITCHES 64 Switching positions Qty : 2 nos. Full Open & Closed 1 NO & 1 NC
43 Require Torque 187.8NM 65 Electrical Connection 1/2" NPT (F)
44 Opening time <6 sec 66 Certification/Approval CCOE
ACTUATOR 45 Closing time <6 sec 67 Enclosure Make Model Rotex DXLW 3A2-4R
1
46 Make Rotex 68 Switches make Model P&F NJ2-V3-N
1
47 Model QTF 150E 10
1 69 Filter type 5 micron
AIR FILTER
70 Air set gauges 4 kg/cm2
REGULATOR
71 Make Shavo
72 Model 11-4SN-201M-M6KA-NB
73 Standard hydro-pneumatic test EN-12266-1(BS:6755-1)
TEST

1 7/9/2016 ISSUED FOR PURCHASE PM KF LV

0 10/8/2016 ISSUED FOR PURCHASE PM KF LV
Rev Date DESCRIPTION BY CHK APP PROJ CLIENT
Proj No: DEPL-357-A
ACTUATED ON/OFF VALVE
E01-DEPL-357-ABV-A
Location Rajnandgaon, Chhattisgarh, India
Diva Envitec Pvt Ltd.(DEPL) Client Lanco Solar Pvt.Ltd
 1 Tag Number 112-XV-0104
1
2 Service Main vessel gas outlet Actuated On-Off valve
3 Location Equipment System Field DCS
4 Line number P&ID NA B99-DEPL-357-A
GENERAL
5 Ambient temperature Min Max 13 Deg C 45 Deg C
6 Avail air supply press Min Max 4kg/cm2 10Kg/cm2
7 Power, Signal loss Pneu Supply Failure Position Closed Closed
8 NACE Requirement IBR Certification No No
PIPE 9 Line Size Schedule 8" 40S
10 Fluid name Fluid state Chlorosilane vapors Vapors
11 Corrosive Erosive Toxic Yes No No
12 PROCESS DESIGN CONDITIONS Units Minimum Normal Maximum
13 Design Pressure kg/cm2g 3.5
PROCESS
14 Design Temperature Deg C 240
CONDITION
15 OPERATING CONDITIONS Units @ Min. Flow @ Norm. Flow @ Max. Flow
16 Flow Rate M3/Hr 848
17 Inlet Pressure kg/cm2g 2.1
18 Inlet Temperature Deg C 135
19 Body type 2 piece,Floating design
20 Bonnet style Standard LOCAL 47 Indicator style Mechanical (Open/Close)
21 Body size 200 NB POSITION 48 Indicator colors Yellow/Red
1 INDICATOR
BODY 22 Conn size I TypeI Rating ASME 300RF
AND 23 Face-to-face std ASME B16.10
BONNET 24 Packing material PTFE
25 Body and bonnet matl WCB
26
27 Closure member type Ball
28 Trim size Full Bore 49 Body type Reset type 3/2-way Auto
29 Seat leakage class IV 50 Enclosure type Exia rated IP 67,Weather proof 1
30 Flow direction force Bi-Directional 51 Inlet conn size 1/2" NPT F
VALVE 31 Stem extension length 100mm SOLENOID 52 Signal power source 24 VDC
32 Plug/ Ball/ Disk material SS316+ENP VALVE 53 Mounting location Valve mounted
33 Seat material SS316+Stellited 54 Body material Aluminium
34 Shaft material 17-4PH 55 Certification/Approval CCOE
35 56 Electrical Connection 1/2"NPT (F)
36 Actuator type Rack & Pinion 57 Make Rotex
37 Acting style Double 58 Model I3003-16-4R-24VDC-67NS-H
1
38 Handwheel type/Lct No 58 Housing type Exia rated IP65,Weatherproof
39 Mounting orientation Parallel to Pipeline 59 Sensor Style Proximity
40 Casing/Cylinder matl Aluminium alloy Hard Anodized 60 Mounting Location Valve
41 Diaphragm/O ring matl NBR 61 Contact rating 8VDC,3mA,NC
1
42 Opening time <14 sec SWITCHES 62 Switching positions Qty : 2 nos. Full Open & Closed 1 NO & 1 NC
43 Closing time <14 sec 63 Electrical Connection 1/2" NPT (F)
ACTUATOR 44 Air connection size 3/4" NPT 64 Certification/Approval CCOE
45 Torque 2691NM 65 Enclosure Make Model Rotex DXLW 3A2-4R
1
46 Make Rotex 66 Switches make Model P&F NJ2-V3-N
47 Model DRC400E5
1
1 67 Filter type 5 micron
AIR FILTER
68 Air set gauges 4 kg/cm2
REGULATOR
69 Make Shavo
70 Model 11-4SN-401M-M6KA-NB
TEST 71 Standard hydro-pneumatic test EN-12266-1(BS:6755-1)

1 7/9/2016 ISSUED FOR PURCHASE PM KF LV

0 10/8/2016 ISSUED FOR PURCHASE PM KF LV
Rev Date DESCRIPTION BY CHK APP PROJ CLIENT
Proj No: DEPL­357­A
ACTUATED ON/OFF VALVE
E01­DEPL­357­ABV­A
Location Rajnandgaon, Chhattisgarh, India
Diva Envitec Pvt Ltd.(DEPL) Client Lanco Solar Pvt.Ltd
CRS OF E01-DEPL-357-ABV-A

SR NO COMMENT FROM LANCO COMMENT BY DIVA

1 All tags for Rotary filter to have prefix Incorporated in document.
112. Do this for all tags below
2 Solenoid & Switches should be "Ex ia" Incorporated in document with revised
rated. Select model accordingly. model No.
3 Details of AFR missing. Mention the same AFR (with Pressure gauge) Incorporated in
document with model No.