This product data sheet provides information on the Vigilohm 12 Channel Fault Locator for hospital applications. It is an insulation fault locator with 12 channels, a measurement range of 200 Ohm to 250 kOhm, alarm thresholds that can be set per feeder, and communication via Modbus over RS485. Key specifications include a response time of less than 5 seconds, power consumption of 10W, IP20 casing protection, and operating temperature range of -25°C to 55°C.
This product data sheet provides information on the Vigilohm 12 Channel Fault Locator for hospital applications. It is an insulation fault locator with 12 channels, a measurement range of 200 Ohm to 250 kOhm, alarm thresholds that can be set per feeder, and communication via Modbus over RS485. Key specifications include a response time of less than 5 seconds, power consumption of 10W, IP20 casing protection, and operating temperature range of -25°C to 55°C.
This product data sheet provides information on the Vigilohm 12 Channel Fault Locator for hospital applications. It is an insulation fault locator with 12 channels, a measurement range of 200 Ohm to 250 kOhm, alarm thresholds that can be set per feeder, and communication via Modbus over RS485. Key specifications include a response time of less than 5 seconds, power consumption of 10W, IP20 casing protection, and operating temperature range of -25°C to 55°C.
This product data sheet provides information on the Vigilohm 12 Channel Fault Locator for hospital applications. It is an insulation fault locator with 12 channels, a measurement range of 200 Ohm to 250 kOhm, alarm thresholds that can be set per feeder, and communication via Modbus over RS485. Key specifications include a response time of less than 5 seconds, power consumption of 10W, IP20 casing protection, and operating temperature range of -25°C to 55°C.
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Main Range Vigilohm Device short name IFL12H Product or component type Insulation fault locator Device application Hospital Earthing system IT Language French German Italian Portuguese Russian Spanish English Chinese
Complementary Network rated voltage 0…230 V - DC 0…230 V - AC at 45...65 Hz Number of channels 12 Type of measurement Network insulation resistance - measurement range: 200 Ohm...250 kOhm Local signalling Yellow indicator light: insulation fault Yellow flashing indicator light: communication Green/red indicator light: product status Green indicator light: satisfactory insulation Yellow flashing indicator light: transient fault Threshold setting Alarm: 50...200 kOhm Alarm per channel Alarm threshold: settable per feeder Accuracy +/- 15 % Response time <= 5 s Auxiliary supply voltage 125...250 V DC +/- 15 % 110...230 V AC 50/60 Hz +/- 15 % Power consumption in VA 25 VA Power consumption in W 10 W Test function Remote test
Aug 14, 2020
1 Manual Auto test at start and every 5h Output contact 1 C/O standard or fail-safe Breaking capacity 250 V - AC at 6 A 48 V - DC at 1 A Communication port protocol Modbus Communication port support RS485 Display type Digital display Mounting mode Flush-mounted Clip-on Mounting support DIN rail Panel Mounting position Horizontal Vertical Connections - terminals Power supply: removable screw terminal block0.2…2.5 mm² Output relay: removable screw terminal block0.2…2.5 mm² Toroids inputs: removable screw terminal block0.2…1.5 mm² Communication: removable screw terminal block0.2…2.5 mm² Voltage inputs: removable screw terminal block0.2…2.5 mm² Material Thermoplastic Overvoltage category III Net weight 0.5 kg Cut-out dimensions 92 x 104 mm Height 110 mm Width 108 mm Depth 59 mm
Environment IP degree of protection Case: IP20 Front face: IP54 Environmental characteristic Exposure to damp heat not in service conforming to IEC 60068-2-30 Exposure to damp heat in service conforming to IEC 60068-2-56 Salt mist conforming to IEC 60068-2-52 Operating altitude <= 3000 m Pollution degree 2 Relative humidity 5…92 % Type of installation Indoor Standards IEC 61010-1 IEC 60364-7-710 IEC 61326-2-4 IEC 61557-9 Product certifications DNV-GL EAC CE UL CULus Ambient air temperature for operation -25…55 °C Ambient air temperature for storage -40…85 °C
Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 550 g Package 1 Height 9.7 cm Package 1 width 18.2 cm Package 1 Length 13.5 cm Unit Type of Package 2 S03 Number of Units in Package 2 8
2 Package 2 Weight 5.14 kg Package 2 Height 30 cm Package 2 width 30 cm Package 2 Length 40 cm
Offer Sustainability EU RoHS Directive Compliant EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
