JEFFADD™ additives

Performance
Products
Asia Pacific Sales Offices Americas
Huntsman Corporation
Australia Singapore (SEA) 10003 Woodloch Forest Drive
61 Market Road 150 Beach Road The Woodlands, Texas, 77380
Brooklyn, #37-00 Gateway West USA
JEFFCAT® catalysts
Victoria 3012, Australia Singapore 189720 Tel : +1-281-719-6000
Tel : +61-3-9933-6696 Tel : +65-6297-3363
Fax : +1-281-719-6055
Fax : +61-3-9933-6656 Fax : +65-6296-3368

China Taiwan
Asia Pacific JEFFADD™ additives
49 Floor Maxdo Centre No. 19 Huntsman Performance Products
Typical Properties Typical Applications 8 Xing Yi Road Industrial Third Road 150 Beach Road For the polyurethane industry
JEFFADD™ additives

Shanghai 200336, Kuan Yin Industrial District #37-00 Gateway West

Flexible Foam
Singapore 189720

Specific Gravity 20/20°C

OH Number, mgKOH/g ‡
P. R. China Taoyuan, Taiwan

Elastomers, RIM, RRIM

Viscosity, cSt at 25°C
Slabstock Molded Tel : +86-21-2325-7888 Tel : +886-3-483-8616 Tel : +65-6297-3363

Coatings, Adhesives
Description Fax : +86-21-2325-7908 Fax : +886-3-483-6412 Fax : +65-6296-3368 Asia Pacific Region

Packaging Foam
Boiling Point,°C

Flash Point, °C

Microcellulars,

Rigid Foam,
HR Molded
Japan Korea Europe, Africa and Middle East
6th Floor, 5-5-2 9th Floor, Dukmyung Building Huntsman Performance Products www.huntsman.com/performance_products

Ether
Ester
KIBC South Building 170-9 Samsung-dong
Everslaan 45
Minatojima Minamimachi, Chuo-ku Gangnam-gu
Kobe 650-0047, Japan Seoul, Korea
B-3078 Everberg
Aldehyde Scavenger Belgium
Tel : +81-78-304-3900 Tel : +82-2-3404-6800
FM 505 Formaldehyde scavenger, can be used to reduce n.d. 60 330 >150CC 0.98 Fax : +81-78-304-3970 Fax : +82-2-556-3263 Tel : +32-2-758-9211
formaldehyde emission in PU foam. Fax : +32-2-758-9946
India
Cell Opener B - Wing, Light Hall Building,
Disclaimer
Hiranandani Business Park, Huntsman Corporation warrants only that its products
FM 200 Improves the cell openess & comfort of the foam. It can be 32-36 1500 >300 250 CC 1.03 Opp. Linkway Honda Showroom, meet the specifications stated in the sales contract.
used in flexible polyurethane foams utilising TDI or TM/MT (max) Typical properties, where stated, are to be considered
Saki Vihar Road, Chandivali,
technology. as representative of current production and should not
Mumbai - 400072, India be treated as specifications. While all the information
Foam Modifier Tel : +91-22-4287-5100 presented in this document is believed to be reliable
and to represent the best available data on these
Fax : +91-22-4287-5300/400 products, HUNTSMAN MAKES NO WARRANTY OR
HD 201 Enhances the foam elongation properties while maintaining 56.1 248 >250 185 CC 0.99 GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED,
the foam hardness. It is an ideal choice to compliment the INCLUDING BUT NOT LIMITED TO ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A
elongation for the low-density or highly filled flexible foam. PARTICULAR PURPOSE, NON-INFRINGEMENT OF

Sustainable chemistry
ANY INTELLECTUAL PROPERTY RIGHT OF ANY
HD 401 Enhances the foam hardness and increases the load bearing 281 22 >260 163 CC 0.97 THIRD PARTY, OR WARRANTIES AS TO QUALITY OR
CORRESPONDENCE WITH PRIOR DESCRIPTION OR
properties of the foam while maintaining the tensile strength & SAMPLE, AND ANY USER OF PRODUCTS DESCRIBED
elongation properties. Designed for low index and low-density HEREIN SHOULD CONDUCT A SUFFICIENT
flexible foams. We are dedicated to sustainable chemistry and the ongoing INVESTIGATION TO ESTABLISH THE SUITABILITY
development of low impact chemical components that can help OF ANY PRODUCT FOR ITS INTENDED USE AND
ASSUMES ALL RISK AND LIABILITY WHATSOEVER
resolve some of the major global challenges facing the human RESULTING FROM THE USE OF SUCH PRODUCT,
‡
theoretical OH Number including polyol, amine, acid and water functionalities n.d. not determined WHETHER USED SINGLY OR IN COMBINATION WITH
population. Contributing to formulations that maximize the use of OTHER SUBSTANCES. Products may be toxic and
our planet’s natural resources, we employ bio-based renewable require special precautions in handling. For all products
described herein, the user should obtain detailed
feedstocks and raw materials wherever possible. Our sites also information on toxicity, together with proper shipping,
handling, and storage procedures, and should comply
comply with the highest operational standards, making it easier for with all applicable safety and environmental standards.
The behavior, hazards and/or toxicity of the products
our customers to adhere to complex regulatory guidelines in their referred to in this publication in manufacturing processes
own industries. and their suitability in any given end-use environment
are dependent upon various conditions such as chemical
compatibility, temperature, and other variables, which may
Infinite possibilities not be known to Huntsman. It is the sole responsibility of
the user of such products to evaluate the manufacturing
circumstances and the final products under actual end-use
With manufacturing sites and tehnical teams located requirements and to adequately advise and warn future
around the world, we combine global reach with in-depth purchasers and users thereof.

regional and sector specific support JEFFAMINE, JEFFCAT and JEFFSOL are registered
trademark of Huntsman Corporation or an affiliate thereof
in one or more, but not all, countries.
20 manufacturing locations
JEFFADD is a trademark of Huntsman Corporation or an
3 JV sites & 4 R&D centres Everberg, Belgium affiliate thereof in one or more, but not all, countries.
6 sales hubs
Copyright © 2014 Huntsman Corporation or an affiliate
Over 7 billion pounds of annual thereof. All rights reserved.
production capacity
2,000 associates worldwide
4,000 customers in 400+ countries The Woodlands, US
Shanghai, China
JEFFCAT® amine catalysts
Typical Properties Typical Applications Typical Properties Typical Applications
The large and growing family of JEFFCAT® amine catalysts from Huntsman Performance Products provides

JEFFCAT® catalysts

JEFFCAT® catalysts
solutions to a wide range of urethane applications including polyether and polyester foams, coatings, elastomers, Flexible Foam

One-Component System
Flexible Foam

Specific Gravity 20/20°C

Specific Gravity 20/20°C

OH Number, mgKOH/g ‡

OH Number, mgKOH/g ‡
Elastomers, RIM, RRIM

Elastomers, RIM, RRIM

Viscosity, cSt at 25°C

Viscosity, cSt at 25°C

and high-modulus urethane plastics. The unique industry-leading low emission JEFFCAT® amine catalyst Slabstock Molded

Coatings, Adhesives

Coatings, Adhesives
Slabstock Molded
Description Description

Packaging Foam

Packaging Foam
product range results from the value of Huntsman’s advanced technologies and 40-plus years of experience with

Boiling Point,°C

Boiling Point,°C
Flash Point, °C

Flash Point, °C
Microcellulars,

Microcellulars,
Rigid Foam,

Rigid Foam,
urethane catalysts and addresses the environmental, health and safety aspects of polyurethane foam production

HR Molded

HR Molded
and usage in many application area including automotive, furniture & bedding and spray foams.

Ether

Ether
Ester

Ester
LOW EMISSION CATALYSTS / REACTIVE CATALYSTS SPECIALTY AMINE CATALYSTS
Typical Properties Typical Applications DMAPA Used in a variety of polyurethane foam applications. 549 1 135 29 0.82 DM-70 Improves green strength and can be used for charcoal n.d. 7 151* 39 0.99
JEFFCAT® catalysts

TCC polyester-based flexible foams. TCC

Flexible Foam

Specific Gravity 20/20°C

OH Number, mgKOH/g ‡

Elastomers, RIM, RRIM

Viscosity, cSt at 25°C
Slabstock Molded DPA Low emission catalyst with good gelation and flowability. 514 145 > 210 * 90 0.95 DMDEE 2,2’-dimorpholinodiethylether : Very selective blowing catalyst. n.d. 19 309 146 1.06

Coatings, Adhesives
TCC Provides a stable prepolymer system. Excellent for 1-K systems. TCC
Description

Packaging Foam
Boiling Point,°C

Flash Point, °C

Microcellulars,

Rigid Foam,
LE-15 This is reactive amine catalyst blend. This product strongly 566 40 235 120 0.99 DMP Dimethylpiperazine : n.d. n.d. 132 22 0.84

HR Molded
promotes the blowing reaction and is formulated to permit PMCC Good catalyst in making polyester TCC
H 3C N N CH3
its easy introduction into polyurethane foam formulations. foams. Also promotes surface cure

Ether
Ester
in different applications.

LE-60 Reactive blowing catalyst used in foams requiring low 384 3 174 81 0.89 NEM N-ethylmorpholine : n.d. 1 138 32 0.91
GENERAL PURPOSE CATALYSTS emissions. PMCC Promotes surface cure for flexible DIN
CH3 CH3CH2N O polyester foams and excellent processing 51756
BDMA n.d. 1 181 54 0.90
N LE-220 High potency, low odor gel catalyst designed to replace 225 3 112 53 0.85 in polyester-based flexible foams.
TCC
JEFFCAT® TD-33A. Used in a wide variety of flexible and PMCC
CH3 Benzyldimethylamine
rigid PU formulations with excellent processing latitude.
NMM N-methylmorpholine : n.d. 1 116 13 0.92
DMCHA CH 3 n.d. 1 160 40 0.85 Good solubilizer in making polyester foams. DIN
N,N-dimethylcyclohexylamine CH3N O
N PMCC LE-310 Low emission gel catalyst which can replace JEFFCAT® 514 37 118 * 57 0.93 Also useful in high rise rigid molded 51756
Widely used catalyst for all types of rigid foams. TD-33A on an equivalent part basis. Can be used in a wide PMCC applications.
CH 3
variety of flexible slabstock and high resiliency (HR) foam
CH3
DMEA 629 4 135 41 0.89 grades. BACK-END CURE CATALYSTS
N TCC
CH3
OH N,N-dimethylethanolamine TAP 1-methyl-4-(2-dimethylaminoethyl)piperazine : Co-catalyst with n.d. n.d. 220 80 0.88
LED-103 Reactive, acid blocked, low emissions type blowing catalyst 2405 104 100 * >188 1.05
that offers improved material handling, low-corrosion, and PMCC excellent end-cure and helps on gelation with improved flow. TCC
CH3 CH3
PMDETA Pentamethyldiethylenetriamine : n.d. 2 201 77 0.83
phase stability in fully formulated B-side flexible molded
N N Especially useful as catalyst for DIN
CH3 N CH3
foams. TR-52 Back-end cure co-catalyst. Shortens the demold time of rigid 760 <9000 n.d. 154 1.13
HCFC/ water-blown rigid foams. 51758
foam systems. PMCC
CH3
LED-204 Reactive, acid blocked, low emissions, low-corrosion type 2555 1856 100 * >188 1.10
TD-33A 33% TEDA in dipropylene glycol 558 104 180* 91 1.03 gelling catalyst used in all types of flexible molded foams. PMCC TR-90 1,3,5-tris(3-(dimethylamino)propyl)-hexahydro-s-triazine : n.d. 30 >200 ◊ 132 0.91
PMCC Improved dimensional stability in many rigid foam systems. PMCC
Useful as a co-catalyst in rigid spray foam.
S-117 Thisis a formulated strong blowing catalyst for low- and 320 11 205 122 0.95
TDBDO 25% TD-100 in 75% 1,4-butanediol (BDO) 934 123 205 102 1.03
medium-density spray foams. The product is a non-fugitive PMCC
catalyst because it contains reactive hydroxyl groups which ‡
theoretical OH Number including polyol, amine, acid and water functionalities * initial boiling point ◊
with decomposition n.d. not determined
TDEG 33.3% TD-100 in monoethylene glycol 1206 n.d. 185* 107 1.09 react into the foaming matrix, thus minimizing catalyst odor
ASTM in finished foams.
D93

Z-80 N,N,N, -tris(3-dimethylaminopropyl-) amine : It acts as a low odor n.d. 10 285 124 0.85 Z-110 Used in a variety of polyurethane foam applications. 384 8 208 88 0.91
gel catalyst, designed mainly for use in rigid polyurethane foams. PMCC PMCC

Z-140 Low odor balanced catalyst with excellent postcure characteristics. n.d. 14 > 132 0.93 Z-130 Low emission reactive gel catalyst. 299 3 222 88 0.84

Auxiliary products
300 PMCC PMCC

ZF-20 CH 3 CH 3 Bis-(2-dimethylaminoethyl)ether n.d. 1 189 64 0.85 Z-131 Blend of low emission, reactive gelling amine catalysts. 407 32 235 * 94 0.89
N N : A very strong, highly efficient DIN PMCC
CH 3 O CH 3 blowing catalyst. 51755

ZF-22 70% ZF-20 in dipropylene glycol 251 4 188* 73 0.90 ZF-10 Strong blowing catalyst that is highly efficient. Used in 295 12 255 118 0.95
TCC foams requiring low emission. PMCC

ZF-54 Delayed-action catalyst made up of ZF-22 partially neutralized with 340 67 n.d. 73 1.10 ZR-50 Low emission catalyst with exceptional balance and 229 17 290 141 0.89
formic acid. Provides excellent cure and flow as co-catalyst. PMCC versatility. PMCC
JEFFAMINE® polyetheramines and JEFFSOL® propylene carbonate
ZR-40 CH3 CH3 CH3 n.d. 3 227 92 0.83 In RIM reaction injection molding technology, the use of JEFFAMINE®
PMCC ZR-70 For use mainly in spray and packaging foam applications. 421 8 201 93 0.96
N N N TCC polyetheramines and JEFFSOL® propylene carbonate can improve various
CH3 CH3
N,N,N',N'',N''-pentamethyl-dipropylenetriamine : physical characteristics such as thermal, abrasion and impact resistance, tear
Very useful in cold-molded HR foams.
Low odor catalyst with a good balance between gel and blow.
strength, solvent stability and dynamic fatigue. Similar characteristics are also
seen in more standard polyurethane foam systems. Jurong Plant, Singapore
‡
theoretical OH Number including polyol, amine, acid and water functionalities * initial boiling point n.d. not determined ‡
theoretical OH Number including polyol, amine, acid and water functionalities * initial boiling point