Scribd
Upload
69 views2 pages

Pipecoater-Iv: Internal Pipecoater For Pipe ID 25 MM To 300 MM (1" - 12")

The PIPECOATER-IV tool allows for even coating of the interior surfaces of pipes and tubing between 25-300mm in diameter without rotating the pipe. It connects to an airless spray system and is inserted into the pipe, where the 360-degree spray pattern applies a uniform coating layer quickly. It efficiently applies various coatings with an even thickness without need for pipe rotation.

Uploaded by

cacalot93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views2 pages

Pipecoater-Iv: Internal Pipecoater For Pipe ID 25 MM To 300 MM (1" - 12")

The PIPECOATER-IV tool allows for even coating of the interior surfaces of pipes and tubing between 25-300mm in diameter without rotating the pipe. It connects to an airless spray system and is inserted into the pipe, where the 360-degree spray pattern applies a uniform coating layer quickly. It efficiently applies various coatings with an even thickness without need for pipe rotation.

Uploaded by

cacalot93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PIPECOATER-IV

Internal Pipecoater for pipe ID 25 mm to 300 mm (1” - 12”) AIRBLAST





PIPECOATER-IV tool is designed to coat the inside of pipe or tubing ranging from 25 to 300 mm (1” - 12”) ID without
the need to rotate pipe or tubing and to apply an even paint film thickness throughout. Generally, any type of coating
may be used in this tool that can be airless sprayed.

PIPECOATER-IV tool can be connected to a suitable airless paint spray machine of minimum 45:1 ratio. The unit is
connected to the end of a pipe lance and connected to the high pressure paint hose coming from the spray pump.
Once the PIPECOATER-IV is positioned within the pipe or tubing regulate the paint and air flow to the correct pres-
sure. The spray gun is triggered to begin the paint flow. The paint will be sprayed through the round spray nozzle in
a 360° spraying pattern.

To stop the PIPECOATER-IV, release the spray gun trigger. For the best possible result, one man should operate the
spray gun while another man pulls the tool through the pipe or tubing.

Advantages

• Efficiently handles wide range of coatings


• Applies uniform layer at remarkable speed
• No need to rotate the pipe or tubing

Pipe Coating Equipment


PIPECOATER-IV INTERNAL PIPECOATER ASSEMBLY
7304001 PIPECOATER-IV – bare – including TNSSTC 6 tip (1.07mm) assy and AB-SS 100 filter (parts 1 – 4, 6 - 10 + 12).
Optional with centering collars for pipes with ID: 76 – 125mm (3” to 5”) and with 125 – 300mm (5” to 12”).

PIPECOATER-IV SPARE PARTS


Item Part no. Description Approx. spray diameter
1 7304008 Tip nut SS
2 7304017 TNSSTC 0.80 spray tip 3” 76mm
7304018 TNSSTC 0.90 spray tip 3” 76mm
7304019 TNSSTC 1 spray tip 3½” 89mm
7304020 TNSSTC 1.5 spray tip 3½” 89mm
7304021 TNSSTC 2 spray tip 4½” 114mm
7304022 TNSSTC 3 spray tip 6” 152mm
7304023 TNSSTC 4 spray tip 8” 203mm
7304024 TNSSTC 6 spray tip 10” 254mm
7304025 TNSSTC 8 spray tip 12” 305mm
7304026 TNSSTC 9 spray tip 14” 355mm
7304027 TNSSTC 10 spray tip 16” 406mm
7304028 TNSSTC 12 spray tip 18” 457mm
7304029 TNSSTC 14 spray tip 14” 355mm
7304030 TNSSTC 15 spray tip 16” 406mm
7304031 TNSSTC 16 spray tip 18” 457mm
7304032 TNSSTC 18 spray tip 16” 406mm
7304033 TNSSTC 20 spray tip 18” 457mm
7304034 TNSSTC 22 spray tip 12” 305mm
7304035 TNSSTC 24 spray tip 13” 330mm
7304036 TNSSTC 26 spray tip 14” 355mm
3 7030414 Tip filter AB-SS 50
7304015 Tip filter AB-SS 100
7304009 Tip filter AB-SS 200
4 7304003 Housing SS
5 7304005 Centering device 2” to 5”
6-10 7304010 Pipecoater, bare
11 7304006 Centering carriage 5” to 12”
12 7304007 Nylon washers (set of 2)

Airblast B.V. ● Surface Treatment Solutions


P.O. Box 1075 ● 1700 BB Heerhugowaard ● The Netherlands © 2014 Airblast B.V. - Doc. nr. LT3025E Rev. E May 2016
Tel.: +31 72 5718002 ● Fax: +31 72 5714340 Printed in the Netherlands.
Email: [email protected] ● Web: www.airblast.com The right is reserved to make changes at any time witout notice.

You might also like