Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    English - EnerSolis Interface Cards User's Manual - 192321462004000

    Uploaded by

    Abdelwhab Elsafty
    This document describes various communication interface options for an inverter system, including: 1. A standard RS232 interface with specifications for baud rate, data length, stop bit, and parity. 2. Optional communication cards for RS-485, USB, and relay contact interfaces. Circuit diagrams and pin assignments are provided for each card. 3. A TCP/IP Ethernet card is also mentioned, with instructions to refer to its accompanying user manual for installation details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    English - EnerSolis Interface Cards User's Manual - 192321462004000

    Uploaded by

    Abdelwhab Elsafty
    99 views4 pages
    This document describes various communication interface options for an inverter system, including: 1. A standard RS232 interface with specifications for baud rate, data length, stop bit, and parity. 2. Optional communication cards for RS-485, USB, and relay contact interfaces. Circuit diagrams and pin assignments are provided for each card. 3. A TCP/IP Ethernet card is also mentioned, with instructions to refer to its accompanying user manual for installation details.

    Original Title

    English_EnerSolis Interface cards User's manual_192321462004000

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes various communication interface options for an inverter system, including: 1. A standard RS232 interface with specifications for baud rate, data length, stop bit, and parity. 2. Optional communication cards for RS-485, USB, and relay contact interfaces. Circuit diagrams and pin assignments are provided for each card. 3. A TCP/IP Ethernet card is also mentioned, with instructions to refer to its accompanying user manual for installation details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views4 pages

    English - EnerSolis Interface Cards User's Manual - 192321462004000

    Uploaded by

    Abdelwhab Elsafty
    This document describes various communication interface options for an inverter system, including: 1. A standard RS232 interface with specifications for baud rate, data length, stop bit, and parity. 2. Optional communication cards for RS-485, USB, and relay contact interfaces. Circuit diagrams and pin assignments are provided for each card. 3. A TCP/IP Ethernet card is also mentioned, with instructions to refer to its accompanying user manual for installation details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    1.

    The communications interface

    1.1 Standard communications interface


    1.1.1 RS232 interface definition

    The RS232 interface shall be set as follows:

    Interface cards Baud Rate


    Data Length
    9600 bps
    8 bits
    Stop Bit 1 bit

    Installation Manual
    Parity None
    1.1.1.2 The Pin Assignments of true RS232 type. The pin assignments of
    true RS232 type are illustrated as follows:

    Pin 2: RS232 Rx
    5 Pin 3: RS232 Tx
    9 4
    8 Pin 5: Ground
    3
    7 2
    6
    1

    VERSION 1.0 1
    2.2 Option communication card 2.2.2 RS-485 card
    2.2.1 Hardware Installation Procedure

    Open the top and sides of the cabinet

    CN1 is for the function of the terminal resistor. Short pin1-2 to enable the
    function and short pin2-3 to disable it.
    CN2 is RS485 terminal, CN3 for remote power.

    Put the communication card into the Definition


    CN2
    slot
    1 2 3 1 Æ Ground
    2 Æ A/Data+
    3 Æ B/Data-
    CN3
    1 2 1 Æ AC+
    2 Æ AC-

    Screw back the side & top cover and


    complete the installation

    2 3
    2.2.3 USB card 2.2.4 True Relay Contact Board (DCE-B card)

    2.2.3.1 CN2 for USB. 2.2.4.1 The pin assignments of 10-Pin Terminal:
    2.2.3.2 Definition
    2.2.3.2.1 Comply with USB version 1.0 & 1.5Mbps. 1 2 3 4 5 6 7 8
    2.2.3.2.2 Comply with USB HID Version 1.0.
    2.2.3.2.3 The Pin Assignments of the USB card: Pin 1: Voltage of utility is abnormal.
    Pin 2: PV strings voltage is normal.

    1 Æ VCC (+5V) Pin 3: PV strings voltage is abnormal.

    2 Æ D－ Pin 4: Frequency of utility is abnormal.

    3 Æ D＋ Pin 5: Anti-islanding.

    4 Æ Ground Pin 6: Output current of inverter is exceeds range.


    Pin 7: Temperature of Heat-sink is too high.
    Pin 8: Common.

    2.2.4.2 The capacity of each relay contact is 40Vdc/25mA.

    4 5
    2.2.5 TCP/IP Cards

    2.2.5.1 TCP/IP (Ethernet) card


    2.2.5.2 For installation, please refer to the user’s manual attached with the card.

    192321462004000
    6 7

    You might also like