Scribd Logo
Upload

Welcome to Scribd!

  • 521 views

    How To Use The Tool of NBDMIFIT Version 1

    Uploaded by

    Carlos Robles
    Como usar la Herramienta NBDMIFIT de HP para la programación de seriales y modelos de equipos laptops

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    How To Use The Tool of NBDMIFIT Version 1

    Uploaded by

    Carlos Robles
    521 views2 pages
    Como usar la Herramienta NBDMIFIT de HP para la programación de seriales y modelos de equipos laptops

    Original Title

    How to use the tool of NBDMIFIT Version 1

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Como usar la Herramienta NBDMIFIT de HP para la programación de seriales y modelos de equipos laptops

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    521 views2 pages

    How To Use The Tool of NBDMIFIT Version 1

    Uploaded by

    Carlos Robles
    Como usar la Herramienta NBDMIFIT de HP para la programación de seriales y modelos de equipos laptops

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    *************************************************************

    **** How to use the tool of NBDMIFIT Version 1.19 ****


    **** ****
    **** This tool works for the platforms from 2007 to 2012 ****
    *************************************************************

    Preparations:
    -------------

    1. Write down the CT number on the label below memory sticks

    2. Make an MS DOS bootable FAT32 USB hard disk.

    3. Unzip the zipped tool file and copy all onto the root directory of USB hard disk.

    *** Brand11 and Brand12 folders are copied under the root directory.***

    4. Remove Power-on password if there is any.

    5. Suggest change the system boot-order to "USB Hard Disk FIRST" from F10 setup.

    6. To commit/brand any 2011 platforms, the EFI Boot needs to be enabled from F10 BIOS Setup.

    Boot to F10 BIOS Setup > System Configuration > Boot Options > select "UEFI Boot Mode"
    >
    Save > Yes > Exit.

    *Note: When this committing process is finished, please disable the EFI Boot:

    F10 Setup > System Configuration > Boot Options > uncheck the box of "UEFI Boot Mode"
    >
    Save > Yes > Exit.

    7. To program any 2012 platforms, boot to windows and run wndmifit.exe.

    8. If the MPM mode is locked on 2012 platforms, escalate to 3LS to get SMC blob to unlock MPM

    Operation Steps (5 and 6 for bNB) :


    ----------------
    1. Make sure power is off.

    2. Attach the USB hard disk to the system.

    3. Boot system to USB hard disk MS DOS.

    4. Run NBDMIFIT.BAT.
    5. Follow the display menu to configure system (Part Number, Serial Number, UUID, etc.)

    Program ConfigID for bNB 2011 platforms:


    Change only bit 3 of byte 2 after default value is displayed as below:
    A0001C02: TPM on
    A0001402: TPM off

    *** System date/time has to be valid to generate UUID.***

    6. The tool will try to commit/brand the blank board, to enable or disable AMT/vPro.

    1). For the platforms from 2007 to 2010:

    The program will prompt with a menu to choose.


    The system will reboot a few times, and display the config state at final.

    2). For 2011 and 2012 products:

    Need to boot to USB drive EFI mode (refer to item 5 in Preparations section, for how to
    enable EFI boot)

    Boot the system > F9 > “Boot From EFI File” > "NBDMIFIT, .../Usb(2,0)/..." >
    "Brand11"/"Brand12"> "Bootx64.efi" >
    (Don't press ESC to skip startup.nsh) ME config menu screen (for Full ME) >
    follow on-screen instruction, choose 1 to enable vPro/AMT or 3 to diable vPro/AMT >
    key 9 and Enter, to reboot > After reboot, press F9 > USB Hard Drive > run “cpqamt read”
    to check config state.

    *Note: When this committing process is finished, please disable the EFI Boot:

    F10 Setup > System Configuration > Boot Options > uncheck the box of "UEFI Boot Mode"
    > Save > Yes > Exit.

    You might also like