W54xCZ ESM

m
o
.c
W547CZ/W548CZ/W549CZ
x
fi
a
in
h
.c
w
w
w
w
w
w
.c
h
in
a
fi
x
.c
o
m
Preface
m
o
Notebook Computer
.c
W547CZ/W548CZ/W549CZ
x
Service Manual
fi
Preface
a
in
h
.c
w
w
w
I
Preface
Notice
The company reserves the right to revise this publication or to change its contents without notice. Information contained
m
herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven-
dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are
they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
o
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or
.c
reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica-
tion, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of
x
their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement
fi
of that product or its manufacturer.
Preface
Version 1.0
a
January 2013
in
Trademarks
h
Intel, Pentium and Intel Core are trademarks of Intel Corporation.
Windows® is a registered trademark of Microsoft Corporation.
.c
Other brand and product names are trademarks and /or registered trademarks of their respective companies.
w
w
w
II
Preface
About this Manual

This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and
inspection of personal computers.
m
It is organized to allow you to look up basic information for servicing and/or upgrading components of the W547CZ/
o
W548CZ/W549CZ series notebook PC.
The following information is included:
.c
Chapter 1, Introduction, provides general information about the location of system elements and their specifications.
Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade
x
elements of the system.
fi
Appendix A, Part Lists
Preface
Appendix B, Schematic Diagrams
Appendix C, Updating the FLASH ROM BIOS
a
in
h
.c
w
w
w
III
Preface
IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to per-
sons when using any electrical equipment:
m
1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
o
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of elec-
trical shock from lightning.
.c
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special disposal instructions.
x
5. This product is intended to be supplied by a Listed Power Unit:
AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19V, 2.1A (40 Watts) minimum AC/DC Adapter.
fi
Preface
CAUTION
a
in
This Computer’s Optical Device is a Laser Class 1 Product
FCC Statement h
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
.c
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
w
w
w
IV
Preface
Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:
m
1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
Do not expose the computer Do not place it on an unstable Do not place anything heavy
o
to any shock or vibration. surface. on the computer.
.c
x
2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This
is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.
fi
Do not expose it to excessive Do not leave it in a place Don’t use or store the com- Do not place the computer on
Preface
heat or direct sunlight. where foreign matter or mois- puter in a humid environment. any surface which will block
ture may affect the system. the vents.
a
in
3.
h
Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save
your work. Remember to periodically save your data as data may be lost if the battery is depleted.
.c
Do not turn off the power Do not turn off any peripheral Do not disassemble the com- Perform routine maintenance
until you properly shut down devices when the computer is puter by yourself. on your computer.
all programs. on.
w
w
w
V
Preface
4. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong mag-
netic fields. These can hinder proper performance and damage your data.
5. Take care when using peripheral devices.
m
Use only approved brands of Unplug the power cord before
peripherals. attaching peripheral devices.
o
.c
x
fi
Power Safety
Preface
The computer has specific power requirements:
a
• Only use a power adapter approved for use with this computer.
• Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are
 unsure of your local power specifications, consult your service representative or local power company.
in
Power Safety • The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do
Warning not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.
Before you undertake • When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.
any upgrade proce-
dures, make sure that
you have turned off the
•
• h
Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
Before cleaning the computer, make sure it is disconnected from any external power supplies.
.c
power, and discon-
nected all peripherals Do not plug in the power Do not use the power cord if Do not place heavy objects
and cables (including cord if you are wet. it is broken. on the power cord.
telephone lines and
w
power cord). It is advis-

able to also remove
your battery in order to
prevent accidentally
w
turning the machine

on.
w
VI
Preface
Battery Precautions
• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.
• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the
m
computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.
• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service
o
personnel.
• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode
.c
or leak if exposed to fire, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Affix tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal objects.
x
Battery Guidelines
fi
The following can also apply to any backup batteries you may have.
Preface
• If you do not use the battery for an extended period, then remove the battery from the computer for storage.
a
• Before removing the battery for storage charge it to 60% - 70%.
• Check stored batteries at least every 3 months and charge them to 60% - 70%.
in

Battery Disposal
h
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under var-
ious state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.
.c
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Discard used battery according to the manufacturer’s instructions.
w
Battery Level
w
Click the battery icon in the taskbar to see the current battery level and charge status. A battery that drops below a level of 10%
will not allow the computer to boot up. Make sure that any battery that drops below 10% is recharged within one week.
w
VII
Preface
Related Documents
You may also need to consult the following manual for additional information:
m
User’s Manual on CD/DVD
This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro-
o
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
.c
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
130°
x
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
fi
computer (e.g. keyboard and mouse) to their ports.
Preface
5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and
a
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing
angle (do not exceed 130 degrees); use the other hand (as 
in
illustrated in Figure 1) to support the base of the computer Figure 1 Shutdown
(Note: Never lift the computer by the lid/LCD). Opening the Lid/LCD/
7. Press the power button to turn the computer “on”. Computer with AC/DC Note that you should always
shut your computer down by
h Adapter Plugged-In
choosing the Shut Down
command from the Power
.c
item in Settings in the
Charms Bar (use the Win-
dows Logo Key + C key
combination to access the
Charms Bar) in Windows 8.
w
This will help prevent hard

disk or system problems.
w
w
VIII
Preface
Contents
Introduction ..............................................1-1 LCD (W547CZ) ............................................................................. A-6
m
LCD (W548CZ) ............................................................................. A-7
Overview .........................................................................................1-1 LCD (W549CZ) ............................................................................. A-8
Specifications ..................................................................................1-2 Bottom ........................................................................................... A-9
o
External Locator - Top View with LCD Panel Open ......................1-4 DVD Dual .................................................................................... A-10
External Locator - Front & Right Side Views .................................1-5
Schematic Diagrams................................. B-1
.c
External Locator - Left Side & Rear View .....................................1-6
External Locator - Bottom View .....................................................1-7 System Block Diagram ...................................................................B-2
Mainboard Overview - Top (Key Parts) .........................................1-8 Processor 1/7-DMI, FDI, PEG ........................................................B-3
Mainboard Overview - Bottom (Key Parts) ....................................1-9 Processor 2/7- CLK, MISC .............................................................B-4
x
Mainboard Overview - Top (Connectors) .....................................1-10 Processor 3/7- (DDR3) ...................................................................B-5
Mainboard Overview - Bottom (Connectors) ...............................1-11 Processor 4/7- Power ......................................................................B-6
fi
Disassembly ...............................................2-1 Processor 5/7- GFX PWR ...............................................................B-7
Preface
Processor 6/7- GND ........................................................................B-8
Overview .........................................................................................2-1
a
Processor 7/7- RSVD ......................................................................B-9
Maintenance Tools ..........................................................................2-2 DDR3 SO-DIMM_0 .....................................................................B-10
Connections .....................................................................................2-2 DDR3 SO-DIMM_1 .....................................................................B-11
in
Maintenance Precautions .................................................................2-3 PANEL, INVERTER, CRT ..........................................................B-12
Disassembly Steps ...........................................................................2-4 PCH 1/9- RTC, HDA, SATA .......................................................B-13
Removing the Optical (CD/DVD) Device ......................................2-5 PCH 2/9- PCIE, SMBUS, CLK ....................................................B-14
h
Removing the Battery ......................................................................2-7
Removing the Hard Disk Drive .......................................................2-9
PCH 3/9- DMI, FDI, PWRGD .....................................................B-15
PCH 4/9- LVDS, DDI, CRT .........................................................B-16
.c
Removing the System Memory (RAM) ........................................2-11 PCH 5/9- PCI, USB, RSVD .........................................................B-17
Removing the Keyboard ................................................................2-13 PCH 6/9- GPIO, CPU ...................................................................B-18
Removing the Wireless LAN Module ...........................................2-15 PCH 7/9- PWR .............................................................................B-19
Removing the CCD .......................................................................2-16
w
PCH 8/9 POWER .........................................................................B-20

Part Lists ..................................................A-1 PCH 9/9- GND .............................................................................B-21
Part List Illustration Location ........................................................ A-2 Mini-PCIE (WLAN) .....................................................................B-22
w
Top (W547CZ) ............................................................................... A-3 CCD, FAN, CLICK, P/W .............................................................B-23

Top (W548CZ) ............................................................................... A-4 USB, LID SWITCH ......................................................................B-24
w
Top (W549CZ) ............................................................................... A-5 LAN RTL8402, Card Reader ........................................................B-25
IX
Preface
SATA ODD, LED ........................................................................ B-26

HDMI, RJ45 ................................................................................. B-27
AUDIO CODEC VT1802S .......................................................... B-28
m
KBC-ITE IT8518E ....................................................................... B-29
5VS, 3VS, 1.5VS CPU ................................................................. B-30
VDD3, VDD5 ............................................................................... B-31
o
Power 0.85VS, 1.8VS .................................................................. B-32
POWER 1.5V/1.05VS .................................................................. B-33
.c
POWER VCORE1 ....................................................................... B-34
POWER VCORE2 ....................................................................... B-35
AC IN, CHARGER ...................................................................... B-36
x
AUDIO BOARD .......................................................................... B-37
POWER SW BOARD .................................................................. B-38
fi
Power On SEQ ............................................................................. B-39
Preface
Updating the FLASH ROM BIOS......... C-1
a
Download the BIOS ....................................................................... C-1
Unzip the downloaded files to a bootable CD/DVD/ or
in
USB Flash drive ............................................................................. C-1
Set the computer to boot from the external drive ........................... C-1
Use the flash tools to update the BIOS .......................................... C-2
Restart the computer (booting from the HDD) .............................. C-2
h
.c
w
w
w
X
Introduction
Chapter 1: Introduction
m
Overview
This manual covers the information you need to service or upgrade the W547CZ/W548CZ/W549CZ series notebook
o
computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual.
Information about dri-vers (e.g. VGA & audio) is also found in the User’s Manual. The manual is shipped with the com-
.c
puter.
Operating systems (e.g. Windows 8, etc.) have their own manuals as do application softwares (e.g. word processing and
database programs). If you have questions about those programs, you should consult those manuals.
1.Introduction
The W547CZ/W548CZ/W549CZ series notebook is designed to be upgradeable. See Disassembly on page 2 - 1 for a
fi
detailed description of the upgrade procedures for each specific component. Please take note of the warning and safety
information indicated by the “” symbol.
a
The balance of this chapter reviews the computer’s technical specifications and features.
in
h
.c
w
w
w
Overview 1 - 1
Introduction
Specifications Processor Options Pointing Device

Intel® Celeron™ Processor Built-in Touchpad
847 (1.10GHz), 877 (1.40GHz)
m
Interface
2MB L3 Cache, 32nm, DDR3-1333MHz, TDP 17W
 Core Logic
Three USB 2.0 Ports
One HDMI-Out Port
Latest Specification Information
o
Intel® NM70 Chipset One External Monitor Port
The specifications listed here are correct at the One Headphone-Out Jack
BIOS
time of sending them to the press. Certain items
One Microphone-In Jack
.c
(particularly processor types/speeds) may be 48Mb SPI Flash ROM
changed, delayed or updated due to the manu- One RJ-45 LAN Jack
AMI BIOS
facturer's release schedule. Check with your One DC-in Jack
service center for more details. Memory
Mini Card Slot
Two 204 Pin SO-DIMM Sockets Supporting DDR3 1333/
x
1600MHz Memory One Slot for WLAN Module or WLAN and Bluetooth Combo
1.Introduction
Module
Memory Expandable up to 16GB
fi
Video Adapter
(The real memory operating frequency depends on the FSB
of the processor.) Intel HD Graphics
 Dynamic Frequency (Intel Dynamic Video Memory Technol-
LCD
a
CPU ogy for up to 1.7GB)
14" (35.56cm) HD LCD Microsoft DirectX®10.1Compatible
The CPU is not a user serviceable part. Ac-
cessing the CPU in any way may violate your
in
Storage Card Reader
warranty.
One Changeable 12.7mm(h) Super Multi Optical Device Embedded Multi-In-1 Card Reader
Drive
MMC (MultiMedia Card) / RS MMC
One Changeable 2.5" 9.5mm (h) SATA HDD
SD (Secure Digital) / Mini SD / SDHC/ SDXC
Audio
h
High Definition Audio Compliant Interface
MS (Memory Stick) / MS Pro / MS Duo
Communication
.c
2 * Built-In Speakers
Built-In 10/100Mb Ethernet LAN
Built-In Microphone
1M HD PC Camera Module
Security
WLAN/ Bluetooth Half Mini-Card Modules:
w
Security (Kensington® Type) Lock Slot

(Factory Option) Intel® Centrino® Wireless-N 105 Wireless
BIOS Password LAN (802.11b/g/n)
Keyboard (Factory Option) Intel® Centrino® Wireless-N 135 Wireless
w
LAN (802.11b/g/n) + Bluetooth 4.0

“WinKey” keyboard (with embedded numeric keypad)
(Factory Option) Third-Party Wireless LAN (802.11b/g/n)
(Factory Option) Third-Party Wireless LAN (802.11b/g/n) +
w
Bluetooth 4.0
1 - 2 Specifications
Introduction
Environmental Spec
Temperature
Operating: 5°C - 35°C
m
Non-Operating: -20°C - 60°C
Relative Humidity
Operating: 20% - 80%
o
Non-Operating: 10% - 90%
Power
.c
Full Range AC/DC Adapter
AC Input: 100 - 240V, 50 - 60Hz
DC Output: 19V, 2.1A (40W)
x
(Factory Option) 4 Cell Smart Lithium-Ion Battery Pack,
32.56WH
1.Introduction
(Factory Option) 6 Cell Smart Lithium-Ion Battery Pack,
fi
48.84WH
Dimensions & Weight
a
340mm (w) * 241mm (d) * 11 - 25.4mm (h)
2.15kg (with ODD and 48.84WH Battery)
in
h
.c
w
w
w
Specifications 1 - 3
Introduction
Figure 1
External Locator - Top View with LCD Panel Open
Top View
m
1. PC Camera
(Optional)
o
2. Built-In 3 2
1
Microphone
.c
3. *PC Camera LED
*When the PC 4
camera is in use,
the LED will be
x
illuminated in red.
1.Introduction
4. LCD
fi
5. Power Button
6. Keyboard 5
a
7. Touchpad &
Buttons
6
in
h 7
.c
w
Note that the Touchpad and

7 Buttons valid operational area
w
is that indicated within the red

dotted lines above.
w
1 - 4 External Locator - Top View with LCD Panel Open

Introduction
External Locator - Front & Right Side Views Figure 2

Front View
m
1. LED Indicator
2. Multi-in-1 Card
FRONT VIEW Reader
o
1
.c
2
1.Introduction
fi
a
Figure 3
in
Right Side View
1. Microphone-In
RIGHT SIDE VIEW Jack
h 2. Headphone-Out
Jack
.c
3. USB 2.0 Port
4. Optical Device
1 2 3 4 6
5 Drive Bay
5. Emergency Eject
w
Hole
6. Security Lock
w
Slot
w
External Locator - Front & Right Side Views 1 - 5

Introduction
External Locator - Left Side & Rear View

Figure 4
Left Side View
m
1. DC-In Jack
2. RJ-45 LAN Jack /
o
3. External Monitor LEFT SIDE VIEW
Port
4. Vent
.c
5. HDMI-Out Port
6. USB 2.0 Ports
3 4 5 6 6
2
x
1
1.Introduction
fi
a
in
Figure 5
Rear View
h REAR VIEW
.c
1. Battery location
1
w
w
w
1 - 6 External Locator - Left Side & Rear View

Introduction
External Locator - Bottom View
m
Figure 6
Bottom View
1. Battery Location
o
2. Bay Cover
1 3. Vent
.c
4. Speakers
1.Introduction
fi
2
a
in
3
3
h 
.c
3
Overheating
To prevent your com-

w
puter from overhea-

ting, make sure no-
4 4 thing blocks any vent
while the computer is
w
in use.
w
External Locator - Bottom View 1 - 7

Introduction
Figure 7 Mainboard Overview - Top (Key Parts)

Mainboard Top
Key Parts
m
1. KBC-ITE IT8518
o
.c
x
1.Introduction
fi
a
in
h
.c
1
w
w
w
1 - 8 Mainboard Overview - Top (Key Parts)

Introduction
Mainboard Overview - Bottom (Key Parts) Figure 8

Mainboard Bottom
m
Key Parts
1. Mini-Card
o
Connector
2. CPU
3. Memory Slots
.c
DDR3 SO-DIMM
4. Platform Controller
1 Hub
x
5. CMOS Battery
2
1.Introduction
fi
a
3
in
h
.c
4
w
5
w
w
Mainboard Overview - Bottom (Key Parts) 1 - 9

Introduction
Figure 9 Mainboard Overview - Top (Connectors)

Mainboard Top
m
Connectors
10 5
8 6
7
1. HDMI-Out Port 11 9
o
2. USB Port 3.0
3. Keyboard Cable
Connector
.c
4. Audio Board
Cable Connector
x
1.Introduction
fi
a
in
3
h
.c
1
2
w
4
2
w
w
1 - 10 Mainboard Overview - Top (Connectors)

Introduction
Mainboard Overview - Bottom (Connectors) Figure 10

Mainboard Bottom
Connectors
m
6
1. ODD Connector
2. HDD Connector
o
7 5
3. Multi-in-1 Card
Reader
.c
4. External Monitor
Port
10 4 5. RJ-45 LAN Jack
12 9
6. DC-In Jack
x
11 8 7. LCD Cable
1.Introduction
Connector
fi
a
in
1
h
.c
2
w
w
3
w
Mainboard Overview - Bottom (Connectors) 1 - 11

1.Introduction
1 - 12
Introduction
w
w
w
.c
h
in
a
fi
x
.c
o
m
Disassembly
Chapter 2: Disassembly
m
Overview
o
This chapter provides step-by-step instructions for disassembling the W547CZ/W548CZ/W549CZ series notebook’s
parts and subsystems. When it comes to reassembly, reverse the procedures (unless otherwise indicated).
.c
We suggest you completely review any procedure before you take the computer apart.
x
Procedures such as upgrading/replacing the RAM, optical device and hard disk are included in the User’s Manual but are
repeated here for your convenience.
2.Disassembly
fi
To make the disassembly process easier each section may have a box in the page margin. Information contained under
the figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a  
a
lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the dis-
Information
assembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previ-
in
ous disassembly procedure. The amount of screws you should be left with will be listed here also.
A box with a  will also provide any possible helpful information. A box with a  contains warnings.
h
An example of these types of boxes are shown in the sidebar.

.c
Warning
w
w
w
Overview 2 - 1
Disassembly
NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the
battery is removed too).
m
Maintenance Tools
The following tools are recommended when working on the notebook PC:
o
• M3 Philips-head screwdriver
• M2.5 Philips-head screwdriver (magnetized)
.c
• M2 Philips-head screwdriver
• Small flat-head screwdriver
• Pair of needle-nose pliers
• Anti-static wrist-strap
x
2.Disassembly
Connections
fi
Connections within the computer are one of four types:
a
Locking collar sockets for ribbon connectors To release these connectors, use a small flat-head screwdriver to
gently pry the locking collar away from its base. When replac-
ing the connection, make sure the connector is oriented in the
in
same way. The pin1 side is usually not indicated.
Pressure sockets for multi-wire connectors To release this connector type, grasp it at its head and gently
rock it from side to side as you pull it out. Do not pull on the
h wires themselves. When replacing the connection, do not try to
force it. The socket only fits one way.
.c
Pressure sockets for ribbon connectors To release these connectors, use a small pair of needle-nose pli-
ers to gently lift the connector away from its socket. When re-
placing the connection, make sure the connector is oriented in
w
the same way. The pin1 side is usually not indicated.

Board-to-board or multi-pin sockets To separate the boards, gently rock them from side to side as
w
you pull them apart. If the connection is very tight, use a small
flat-head screwdriver - use just enough force to start.
w
2 - 2 Overview
Disassembly
Maintenance Precautions
The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a re- 
moval and/or replacement job, take the following precautions:
m
Power Safety
Warning
1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other
Before you undertake
o
components could be damaged. any upgrade proce-
2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight. dures, make sure that
3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong mag- you have turned off the
.c
netic fields. These can hinder proper performance and damage components and/or data. You should also monitor power, and discon-
the position of magnetized tools (i.e. screwdrivers). nected all peripherals
and cables (including
4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly telephone lines and
x
damaged. power cord). It is advis-
5. Be careful with power. Avoid accidental shocks, discharges or explosions. able to also remove
2.Disassembly
•Before removing or servicing any part from the computer, turn the computer off and detach any power supplies. your battery in order to
fi
•When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire. prevent accidentally
6. Peripherals – Turn off and detach any peripherals. turning the machine
7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity. on.
a
Before handling any part in the computer, discharge any static electricity inside the computer. When handling a
printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that
in
you use an anti-static wrist strap instead.
8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands pro-
duce oils which can attract corrosive elements.
9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted
to charged surfaces, reducing performance. h
10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as
.c
screws, loose inside the computer.
Cleaning
w
Do not apply cleaner directly to the computer, use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
w
w
Overview 2 - 3
Disassembly
Disassembly Steps
The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM
m
THE DISASSEMBLY STEPS IN THE ORDER INDICATED.
To remove the Optical Device: To remove the CCD Module:
o
1. Remove the Optical device page 2 - 5 1. Remove the Optical device page 2 - 5
2. Remove the battery page 2 - 7
.c
To remove the Battery: 3. Remove the CCD module page 2 - 16
1. Remove the Optical device page 2 - 5
x
To remove the HDD:
2.Disassembly
fi
3. Remove the HDD page 2 - 9
a
To remove the System Memory:
in
3. Remove the system memory page 2 - 11
To remove the Keyboard:
1. Remove the Optical device
h page 2 - 5
.c
3. Remove the keyboard page 2 - 15
w
To remove the Wireless LAN Module :

w

3. Remove the WLAN page 2 - 15
w
2 - 4 Disassembly Steps
Disassembly
Removing the Optical (CD/DVD) Device Figure 1

Optical Device Re-
1. Turn the computer off, and turn it over.
moval
m
2. Remove the screw 1 (Figure 1a).
3. Carefully pull out the optical device 3 out of the bay at point 2 (Figure 1b). a. Remove the screw.
4. Carefully pry the bezel 5 off the optical device at point 4 . b. Pull out the optical de-
o
5. Separate the bezel 5 and the optical device. vice.
c. Pry the bezel off the opti-
a. b. cal device.
.c
d. Separate the bezel and
optical device
x
2
2.Disassembly
fi
1
3
a
in
c. d.
4
h
.c

5
w
3. Optical Device
5. Bezel
w
• 1 Screw
w
Removing the Optical (CD/DVD) Device 2 - 5

Disassembly
Figure 2 6. Reverse the process to attach the front bezel 5 with the new optical device at point 6 (Figure 2e).
Optical Device 7. Insert the new optical device 3 and carefully slide it into the computer (the device only fits one way. DO NOT
Assembly FORCE IT; The screw holes should line up).
m
8. Replace and tighten the screw 7 (Figure 2g).
e. Install the front bezel. 9. Restart the computer to allow it to automatically detect the new device.
f. Insert the optical device.
o
g. Tigthen the screw. e. f.
6
.c
5
x
2.Disassembly
fi
a
in
g.
h
.c
7

3. Optical Device
w
5. Bezel
w
• 1 Screw
w
2 - 6 Removing the Optical (CD/DVD) Device

Disassembly
Removing the Battery Figure 3

1. Turn off the computer, turn it over to first remove the optical device (page 2 - 5). Battery Removal
m
2. Remove screws 1 - 6 from the bottom case (Figure 3a).
a. Remove screws from the
3. Carefully separate the bottom case 68 from the top case in the direction of the arrow at point 7 (Figure 3b). bottom case.
4. The battery will be visible at point 9 (Figure 3c). b. Separate the top and bot-
o
tom case.
a. b. c. The battery wil be visible.
1 3
.c
2
8
x
7
2.Disassembly
fi
6
a
in
5
4
c.
9 h
.c
8

w
8. Bottom Case
w
• 6 Screws
w
Removing the Battery 2 - 7

Disassembly
5. Remove screws 10 - 12 from the battery (Figure 4d).

Figure 4
6. Turn the battery 13 in the direction of the arrow 14 and lift it out 15 (Figure 4e).
Battery Removal &
7. Insert a new battery 13 at point 16 in the direction of the arrow 17 . Turn the battery 18 to align the connectors.
Assembly (cont’d.)
m
8. Tighten screws 19 - 21 (Figure 4g).
d. Remove the screws.
9. Reattach the bottom cover with the top case at point 22 in the direction of the arrow 23 (Figure 4h).
e. Turn the battery in the di- 10. Snap together the sides 24 - 26 of the bottom cover and top case (Figure 4i) and replace the corresponding
o
rection of the arrow and screws.
lift the battery out.
d. f.
.c
f. Install a new battery and
and turn the battery to 18
align the connector. 17
g. Tigthen the screws 10 11 16
12
h. Reattach the bottom cov- 13
x
er and top case.
2.Disassembly
i. Snap the sides to close e.
fi
and replace the screws.
13 14
a
g.
in
19 20 21
i.
h 15
24
.c
 h. 23
w
25
13. Battery 22
w
26
• 3 Screws
w
2 - 8 Removing the Battery

Disassembly
Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm Figure 5
m
(h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in HDD Assembly
Chapter 4 of the User’s Manual) when setting up a new hard disk. Removal
o
Hard Disk Upgrade Process a. Locate the HDD assembly.
1. Turn off the computer, turn it over to remove the optical device (page 2 - 5) and battery (page 2 - 7).
.c
2. The hard disk drive will be visible at point 1 (Figure 5a).
x
a. 
2.Disassembly
fi
HDD System Warning
New HDD’s are blank. Before you

begin make sure:
a
You have backed up any data
you want to keep from your old
in
HDD.
You have all the CD-ROMs and

FDDs required to install your op-
1 h erating system and programs.
If you have access to the internet,

.c
download the latest application
and hardware driver updates for
the operating system you plan to
install. Copy these to a remov-
able medium.
w
w
w
Removing the Hard Disk Drive 2 - 9

Disassembly
3. Slightly lift and pull the hard disk assembly in the direction of arrow 2 (Figure 6b).
Figure 6 4. Lift the hard disk assembly 63 out of the bay 4 (Figure 6c).
HDD Assembly 5. Remove the screws 5 - 8 and the adhesive cover 9 from the hard disk 10 (Figure 6d).
m
Removal (cont’d.)
6. Reverse the process to install a new hard disk (do not forget to replace all the screws and bay cover).
b. Slightly lift and pull the
b. c.
o
HDD assembly in the di-
rection of the arrow.
c. Lift the HDD assembly
.c
out of the bay.
d. Remove the screws and
adhesive cover. 2
x
3 4
2.Disassembly
fi
a
in
6
d.
5 8

h
.c
9 7
3. HDD Assembly
9. Adhesive Cover
10. HDD
w
10
• 4 Screws
w
w
2 - 10 Removing the Hard Disk Drive

Disassembly
Removing the System Memory (RAM) Figure 7

RAM Module
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting Removal
m
DDRIII (DDR3) Up to 1333/1600 MHz. The main memory can be expanded up to 16GB. The SO-DIMM modules sup-
ported are 1024MB and 2048MB DDRIII Modules. The total memory size is automatically detected by the POST rou- a. The RAM modules will
tine once you turn on your computer. be visible at point 1
o
on the mainboard.
b. Pull the release lat-
Memory Upgrade Process
.c
ches.
1. Turn off the computer, turn it over to remove the optical device (page 2 - 5) and battery (page 2 - 7). c. Remove the module.
2. The RAM modules will be visible at point 1 on the mainboard (Figure 7b).
3. Gently pull the two release latches ( 2 & 3 ) on the sides of the memory socket in the direction indicated by the
x
arrows (Figure 7b). The RAM module 4 will pop-up (Figure 7c), and you can then remove it.
2.Disassembly
fi
a.

Contact Warning

a
Be careful not to touch
Single Memory Module the metal pins on the
in
Installation module’s connecting
1 edge. Even the cleanest
If your computer has a single hands have oils which
memory module, then insert can attract particles, and
the module into the Channel
b. c.
h 0 (JDIMM1) socket. In this
case this is the lower memo-
degrade the module’s
performance.
.c
ry socket (the socket closest
to the mainboard).
2 3 
w
4
4. RAM Module
w
w
Removing the System Memory (RAM) 2 - 11

Disassembly
4. Pull the latches to release the second module if necessary.

5. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
6. The module will only fit one way as defined by its pin alignment. Make sure the module is seated as far into the slot
m
as it will go. DO NOT FORCE IT; it should fit without much pressure.
7. Press the module in and down towards the mainboard until the slot levers click into place to secure the module.
8. Replace the bottom cover and the screws (see page 2 - 7).
o
9. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
.c
x
2.Disassembly
fi
a
in
h
.c
w
w
w
2 - 12 Removing the System Memory (RAM)

Disassembly
Removing the Keyboard Figure 8

Keyboard Removal
m
2. Press at point 1 to release the cover module (Figure 8a).
a. Release the cover mod-
3. Turn the computer over, unsnap up the cover module 2 in the direction of the arrow 3 (Figure 8b). ule by pressing at point
4. Remove screws 4 - 7 from the keyboard (Figure 8c). 1 .
o
5. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable 8 . Disconnect the keyboard rib- b. Unsnap the cover mod-
bon cable from the locking collar socket 9 (Figure 8d). ule.
c. Remove the screws.
.c
6. Carefully lift up the keyboard 10 off the computer (Figure 8e).
d. Disconnect the keyboard
a. c. ribbon cable from the
locking collar socket.
1 e. Remove the keyboard.
x
4 5 6 7
2.Disassembly
fi
a
in
d.
e.
b.
h
.c
8
2 9 9
3

w
2. Cover Module
10. Keyboard
w
10
• 4 Screws
w
Removing the Keyboard 2 - 13

Disassembly
Figure 9 7. Connect the keyboard ribbon cable from the locking collar socket 12 , and be careful not to bend the keyboard rib-
Keyboard Assembly bon cable 11 (Figure 9f).
8. Tighten the screws 13 - 16 (Figure 9g).
m
f. Connect the keyboard
9. Replace the cover module as shown (Figure 9h).
ribbon cable to the lock-
ing collar socket. f.
o
g. Tigthen the screws.
h. Replace the cover mod-
11
ule.
.c
12 12
x
2.Disassembly
fi
a
in
g. h.
13 14 15 16 18
 h 17
.c
10. Keyboard
• 4 Screws
w
w
w
2 - 14 Removing the Keyboard

Disassembly
Removing the Wireless LAN Module Figure 10

Wireless LAN
Module Removal
m
2. The Wireless LAN module will be visible at point 1 on the mainboard (Figure 10a).
3. Carefully disconnect the cables 2 & 3 , and then remove the screw 4 (Figure 10b)
a. Locate the WLAN.
4. The Wireless LAN module 5 (Figure 10c) will pop-up, and you can remove it from the computer. b. Disconnect the cable
o
and remove the screw.
a. c. c. The WLAN module will
.c
pop up and lift it out of
the computer.
1 5
5 Note: Make sure you
x
reconnect the antenna
2.Disassembly
cable to the “1 + 2”
fi
socket (Figure 10b).
a
b.
in
4 3 2
h
.c

5.Wireless LAN Module
w
• 1 Screw
w
w
Removing the Wireless LAN Module 2 - 15

Disassembly
Figure 11 Removing the CCD

CCD Removal
m
2. Carefully remove the rubber screw covers 1 - 2 and screws 3 - 4 from the front cover (Figure 11a).
a. Carefully remove the
rubber screw covers and
3. Run your fingers around the inner frame of the LCD panel at the points as indicated by the arrows 5 - 8 .
screws from the front 4. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Push the LCD front
o
cover. cover 9 upwards before carefully lifting it up.
k. Run your fingers around 5. Remove the LCD front cover 9 (Figure 11c).
the inner frame of the
.c
LCD panel at the points
indicated by the arrows.
a. c.
l. Lay the computer down
on a flat surface with the
x
top case up forming a 90
2.Disassembly
degree angle. Push the
fi
LCD front panel upwards
before carefully lifting it
up.
d. Remove the LCD front
a
cover. 9
1 2
in
3 4
b. d.
h
7
.c
6 8

w
9. LCD Front Cover 9

w
• 2 Screws 5
w
2 - 16 Removing the CCD

Disassembly
6. Disconnect the cable 14 . Figure 12

7. Remove the CCD module 15 (Figure 12f). CCD Removal
8. Reverse the process to install a new CCD module. (cont’d)
m
e. e. Disconnect the cable.
f. Remove the CCD mod-
o
ule.
14
.c
x
f.
15
2.Disassembly
fi
a
in
h 
15. CCD Module
.c
w
w
w
Removing the CCD 2 - 17

2.Disassembly
2 - 18
Disassembly
w
w
w
.c
h
in
a
fi
x
.c
o
m
Appendix A:Part Lists
m
This appendix breaks down the W547CZ/W548CZ/W549CZ series notebook’s construction into a series of illustrations.
The component part numbers are indicated in the tables opposite the drawings.
o
Note: This section indicates the manufacturer’s part numbers. Your organization may use a different system, so be sure
to cross-check any relevant documentation.
.c
Note: Some assemblies may have parts in common (especially screws). However, the part lists DO NOT indicate the
total number of duplicated parts used.
x
Note: Be sure to check any update notices. The parts shown in these illustrations are appropriate for the system at the
A.Part Lists
fi
time of publication. Over the product life, some parts may be improved or re-configured, resulting in new part numbers.
a
in
h
.c
w
w
w
A - 1
Part List Illustration Location
The following table indicates where to find the appropriate part list illustration.
m
Table A - 1
Part List Illustration
Part W547CZ W548CZ W549CZ
Location
o
Top page A - 3 page A - 4 page A - 5
.c
LCD page A - 6 page A - 7 page A - 8
Bottom page A - 9
x
DVD Dual Drive page A - 10
A.Part Lists
fi
a
in
h
.c
w
w
w
A - 2
Top (W547CZ)
m
o
.c
x
Figure A - 1
A.Part Lists
fi
Top (W547CZ)
a
in
h
.c
w
w
w
Top (W547CZ) A - 3
Top (W548CZ)
m
o
.c
x
Figure A - 2
A.Part Lists
fi
Top (W548CZ)
a
in
h
.c
w
w
w
A - 4 Top (W548CZ)
Top (W549CZ)
m
o
.c
x
Figure A - 3
A.Part Lists
fi
Top (W549CZ)
a
in
h
.c
w
w
w
Top (W549CZ) A - 5
LCD (W547CZ)
m
o
.c
x
Figure A - 4
A.Part Lists
LCD (W547CZ)
fi
a
設變
in
h
.c
w
w
w
A - 6 LCD (W547CZ)
LCD (W548CZ)
m
o
.c
x
Figure A - 5
LCD (W548CZ)
A.Part Lists
fi
a
設變
in
h
.c
w
w
w
LCD (W548CZ) A - 7
LCD (W549CZ)
m
o
.c
x
Figure A - 6
A.Part Lists
LCD (W549CZ)
fi
a
設變
in
h
.c
w
w
w
A - 8 LCD (W549CZ)
Bottom
m
o
.c
x
Figure A - 7
Bottom
A.Part Lists
fi
a
in
h
.c
w
w
w
Bottom A - 9
DVD Dual
m
o
.c
x
Figure A - 8
A.Part Lists
DVD Dual
fi
a
非耐落
in
h
.c
w
w
w
A - 10 DVD Dual
Schematic Diagrams
Appendix B: Schematic Diagrams
m
This appendix has circuit diagrams of the W547CZ/W548CZ/W549CZ notebook’s PCB’s. The following table indicates
where to find the appropriate schematic diagram.
o
Diagram - Page Diagram - Page Diagram - Page
Table B - 1
.c
System Block Diagram - Page B - 2 PCH 4/9- LVDS, DDI, CRT - Page B - 16 5VS, 3VS, 1.5VS CPU - Page B - 30 SCHEMATIC
Processor 1/7-DMI, FDI, PEG - Page B - 3 PCH 5/9- PCI, USB, RSVD - Page B - 17 VDD3, VDD5 - Page B - 31 DIAGRAMS
Processor 2/7- CLK, MISC - Page B - 4 PCH 6/9- GPIO, CPU - Page B - 18 Power 0.85VS, 1.8VS - Page B - 32
B.Schematic Diagrams
x
Processor 3/7- (DDR3) - Page B - 5 PCH 7/9- PWR - Page B - 19 POWER 1.5V/1.05VS - Page B - 33
Processor 4/7- Power - Page B - 6 PCH 8/9 POWER - Page B - 20 POWER VCORE1 - Page B - 34
fi
Processor 5/7- GFX PWR - Page B - 7 PCH 9/9- GND - Page B - 21 POWER VCORE2 - Page B - 35
Processor 6/7- GND - Page B - 8 Mini-PCIE (WLAN) - Page B - 22 AC IN, CHARGER - Page B - 36

a
Processor 7/7- RSVD - Page B - 9 CCD, FAN, CLICK, P/W - Page B - 23 AUDIO BOARD - Page B - 37
DDR3 SO-DIMM_0 - Page B - 10 USB, LID SWITCH - Page B - 24 POWER SW BOARD - Page B - 38 Version Note
in
DDR3 SO-DIMM_1 - Page B - 11 LAN RTL8402, Card Reader - Page B - 25 Power On SEQ - Page B - 39 The schematic dia-
grams in this chapter
PANEL, INVERTER, CRT - Page B - 12 SATA ODD, LED - Page B - 26
are based upon ver-
PCH 1/9- RTC, HDA, SATA - Page B - 13 HDMI, RJ45 - Page B - 27 sion 6-7P-W5406-001.
PCH 2/9- PCIE, SMBUS, CLK - Page B - 14 h
AUDIO CODEC VT1802S - Page B - 28
If your mainboard (or
other boards) are a lat-
er version, please
.c
PCH 3/9- DMI, FDI, PWRGD - Page B - 15 KBC-ITE IT8518E - Page B - 29
check with the Service
Center for updated di-
agrams (if required).
w
w
w
B - 1
Schematic Diagrams
System Block Diagram
m
VDD3,VDD5 W54XCZ
o
5V,3V,5VS,3VS,1.5VS, Chief River System Block Diagram W54XCZ MAIN BOARD
1.8VS,+1.5S_CPU
Intel Celeron AUDIO BOARD
PHONE JACK x2, USB x1
1.8V, 0.85VS Sandy Bridge
.c
31*24 mm 1333 POWER SWITCH BOARD
1.5V,0.75VS(VTT_MEM) PROCESSOR DDR3 / 1.5V
1.05VS DDRIII
BGA1023 SO-DIMM1
VCORE,VGFX_CORE SYSTEM SMBUS DDRIII

0.1"~13
x
FDI DMI*4 SO-DIMM2
0.5"~5.5" <=8"
AUDIO BOARD
LCD CONNECTOR <8"
fi
Sheet 1 of 38 CRT CONNECTOR <15"
MIC
IN
HP
OUT SHEET 36
System Block HDMI Connector PantherPoint

Diagram SENTELIC Controller (INT SPK R)
a
TOUCH PAD
EC/BIOS SPI Hub (PCH)
INT SPKER-L
32.768 KHz Azalia Codec
25x25mm
in
EC LPC VIA
ITE 8518E 33 MHz 989 Ball FCBGA VT1802S
128pins LQFP
0.5"~11" INT MIC
14*14*1.6mm
24 MHz AZALIA LINK

INT. K/B EC SMBUS
THERMAL
SENSOR
SMART
FAN h
SMART
BATTERY
AC-IN 32.768KHz
PCIE <12" 100 MHz
Mini PCIE RTL8402

25 MHz
.c
SOCKET
WLAN CARD
SATA <12" LAN READER
(USB3)
USB 2.0
7IN1
w
RJ-45
SATA HDD SATA ODD SOCKET
USB PORT1 USB PORT2 USB PORT3 CCD
(USB0) (USB1) (USB9) (USB8)
USB2.0 USB2.0 USB2.0
w
AUDIO BOARD
w
B - 2 System Block Diagram

Schematic Diagrams
Processor 1/7-DMI, FDI, PEG
m
Ivy Bridge Processor 1/7 ( DMI,PEG,FDI )
o
1.05VS
U9A
G3 20 mil PEG_IR COMP_R R262 24.9_1%_04
PEG_ICOMPI G1
M2 PEG_ICOMPO G4
14 DMI_TXN0 P6 DMI_RX#[0] PEG_RCOMPO
14 DMI_TXN1 P1 DMI_RX#[1]
.c
14 DMI_TXN2 P10 DMI_RX#[2] H 22
14 DMI_TXN3 DMI_RX#[3] PEG_RX#[0] J21
N3 PEG_RX#[1] B22
14 DMI_TXP0 P7 DMI_RX[0] PEG_RX#[2] D 21
14 DMI_TXP1 P3 DMI_RX[1] PEG_RX#[3] A19
14 DMI_TXP2 P11 DMI_RX[2] PEG_RX#[4] D 17
14 DMI_TXP3 DMI_RX[3] PEG_RX#[5] B14
K1 PEG_RX#[6] D 13
14 DMI_RXN 0 M8 DMI_TX#[0] PEG_RX#[7] A11
14 DMI_RXN 1 DMI_TX#[1] PEG_RX#[8]
DMI
N4 B10
14 DMI_RXN 2 R2 DMI_TX#[2] PEG_RX#[9] G8
14 DMI_RXN 3 DMI_TX#[3] PEG_RX#[10] A8
K3 PEG_RX#[11] B6
14 DMI_RXP0 DMI_TX[0] PEG_RX#[12]
x
M7 H8 PEG Compensation Signal
14 DMI_RXP1 P4 DMI_TX[1] PEG_RX#[13] E5
14 DMI_RXP2 T3 DMI_TX[2] PEG_RX#[14] K7
14 DMI_RXP3 DMI_TX[3] PEG_RX#[15]
K22
CAD NOTE: PEG_ICOMPI and RCOMPO signals
PEG_R X[0] K19 should be shorted and routed with
PEG_R X[1] C 21
- max length = 500 mils
PCI EXPRESS* - GRAPHICS

U7 PEG_R X[2] D 19
14 FD I_TXN 0 FD I0_TX#[0] PEG_R X[3]
fi
W11 C 19 - typical impedance = 43 mohms
14 FD I_TXN 1 W1 FD I0_TX#[1] PEG_R X[4] D 16
14 FD I_TXN 2 AA6 FD I0_TX#[2] PEG_R X[5] C 13 PEG_ICOMPO signals should be routed with
14 FD I_TXN 3 W6 FD I0_TX#[3] PEG_R X[6] D 12
14 FD I_TXN 4 V4 FD I1_TX#[0] PEG_R X[7] C 11
- max length = 500 mils
14 FD I_TXN 5 FD I1_TX#[1] PEG_R X[8] - typical impedance = 14.5 mohms
14
14
FD I_TXN 6
FD I_TXN 7
Y2
AC9 FD I1_TX#[2]
FD I1_TX#[3]
PEG_R X[9]
PEG_RX[10]
C9
F8
C8
Sheet 2 of 38
Intel(R) FDI
PEG_RX[11] C5
14 FD I_TXP0
U6
W10 FD I0_TX[0]
PEG_RX[12]
PEG_RX[13]
H6
F6 Processor 1/7-DMI,
a
14 FD I_TXP1 W3 FD I0_TX[1] PEG_RX[14] K6
CAD NOTE: DP_COMPIO and ICOMPO signals 14 FD I_TXP2 AA7 FD I0_TX[2] PEG_RX[15]
should be shorted near balls and routed with
- typical impedance < 25 mohms
14
14
14
FD I_TXP3
FD I_TXP4
FD I_TXP5
W7
T4
AA3
FD I0_TX[3]
FD I1_TX[0]
FD I1_TX[1]
PEG_TX#[0]
PEG_TX#[1]
G22
C 23
D 23
FDI, PEG
14 FD I_TXP6 AC8 FD I1_TX[2] PEG_TX#[2] F21
14 FD I_TXP7 FD I1_TX[3] PEG_TX#[3] H 19
1.05VS 1.05VS AA11 PEG_TX#[4] C 17
14 FDI_FSY NC0 AC 12 FD I0_FSY NC PEG_TX#[5] K15
in
14 FDI_FSY NC1 FD I1_FSY NC PEG_TX#[6] F17
U 11 PEG_TX#[7] F14
14 FDI_INT FD I_INT PEG_TX#[8] A15
AA10 PEG_TX#[9] J14
R33 R32 14 FDI_LSY NC 0 AG8 FD I0_LSY NC PEG_TX#[10] H 13
14 FDI_LSY NC 1 FD I1_LSY NC PEG_TX#[11] M10
EDP HPD Function Disable PEG_TX#[12]
*1K_1%_04 24.9_1%_04 F10
EDP_HPD: Pull-up10K- DISABLED HPD PEG_TX#[13] D9
PEG_TX#[14] J4
ED P_COMPIO AF3 PEG_TX#[15]
AD2 eDP_COMPIO F22
DP Compensation Signal AG11 eDP_ICOMPO PEG_TX[0] A23
ED P_HPD
eDP_HPD# PEG_TX[1] D 24
AF4
AG4
AC1
AA4
AE10
AE6
h
eDP_AUX
eDP_AUX#
eDP_TX[0]
eDP_TX[1]
eDP_TX[2]
eDP
PEG_TX[2]
PEG_TX[3]
PEG_TX[4]
PEG_TX[5]
PEG_TX[6]
PEG_TX[7]
PEG_TX[8]
PEG_TX[9]
PEG_TX[10]
E21
G19
B18
K17
G17
E14
C 15
K13
G13
.c
eDP_TX[3] PEG_TX[11] K10
AC3 PEG_TX[12] G10
AC4 eDP_TX#[0] PEG_TX[13] D8
AE11 eDP_TX#[1] PEG_TX[14] K4
AE7 eDP_TX#[2] PEG_TX[15]
eDP_TX#[3]
P31X24_1023B_01B
w
3.3V
9/18
PTH1
1:2 (4mils:8mils)
1 2
THERM_VOLT 28
TH05-3H103FR
R 67
6-17-10320-731
w
10K_1%_04
Place near CPU
w
Processor 1/7-DMI, FDI, PEG B - 3

Schematic Diagrams
Processor 2/7- CLK, MISC
m
Ivy Bridge Processor 2/7 ( CLK,MISC,JTAG )
o
Processor Pullups/Pull downs
PU/PD for JTAG signals 1.05VS
1.05VS
H_PROCHOT# R18 62_04

XDP_TMS
.c
R265 *51_04
R264 *51_04 XDP_TDI_R CAD Note: Use pad sharing method
R257 *51_04 XDP_PREQ# U9B H_CPUPW RGD_R10K_04 R250
R263 *51_04 XDP_TDO_R for following clock resistor placement
R261 *51_04 XDP_TCLK
R256 51_04 XDP_TRST# TRACE WIDTH 10MIL, LENGTH <500MILS
J3
F49 BCLK H2 CLK_EXP_P 13
H_SNB_IVB#
17,29 H_SNB_IVB# PROC_SELECT# BCLK# CLK_EXP_N 13
MISC
CLOCKS
3.3VS C57
PROC_DETECT# AG3
DPLL_REF_CLK AG1 CLK_DP_P 13
R260 *1K_04 XDP_DBR_R DPLL_REF_CLK# CLK_DP_N 13 DDR3 Compensation Signals
x
CAD NOTE: All DDR_COMP signals
H_CATERR# C49 SM_RCOMP_0 R39 140_1%_04
CATERR# should be routed such that :-
If PROCHOT# is not used, - max length = 500 mils SM_RCOMP_1 R36 25.5_1%_04
then it must be terminated - trace width = 15mils and
Sheet 3 of 38 with a 56-£[ +-5% pull-up
resistor to 1.05VS .
17,28,29 H_PECI
R251 *10mil_short A48
PECI SM_DRAMRST#
AT30 CPUDRAMRST#
- MB trace impedance < 68 mohms
(worst case resistance)
SM_RCOMP_2 R42 200_1%_04
THERMAL
fi DDR3
MISC
Processor 2/7-CLK, 33 H_PROCHOT#
H_PROCHOT# R19 56_1%_04 H_PROCHOT#_D C45
PROCHOT# SM_RCOMP[0]
SM_RCOMP[1]
SM_RCOMP[2]
BF44
BE43
BG43
SM_RCOMP_0
SM_RCOMP_1
SM_RCOMP_2
MISC 17 H_THRMTRIP# R17 *10mil_short D45

THERMTRIP#
N53 XDP_PRDY#
PRDY #
a
N55 XDP_PREQ#
PREQ#
L56 XDP_TCLK S3 circuit:- DRAM PWR GOOD logic
TCK L55 XDP_TMS
C48 TMS J58 XDP_TRST#
14,29 H_PM_SY NC PM_SYNC TRST#
M60 XDP_TDI_R
TDI
PWR MANAGEMENT
L59 XDP_TDO_R
JTAG & BPM

R249 *10mil_short H_CPUPWRGD_R B46 TDO 1.5VS_CPU
in
17,29 H_CPUPWRGD UNCOREPWRGOOD
K58 XDP_DBR_R
PMSY S_PWRGD_BUF R41 130_1%_04 VDDPWRGOOD_R BE45 DBR# R49
SM_DRAMPWROK
200_1%_04
G58 XDP_BPM0_R
1.05VS BPM#[0] E55 XDP_BPM1_R
Buffered reset to CPU BPM#[1] E59 XDP_BPM2_R R50 *10mil_04 PMSY S_PWRGD_BUF
BUF_CPU_RST# D44 BPM#[2] G55 XDP_BPM3_R 14,29 PM_DRAM_PWRGD
RESET# BPM#[3] G59 XDP_BPM4_R
3.3VS R267 BPM#[4] H60 XDP_BPM5_R
BPM#[5] J59 XDP_BPM6_R
75_04 BPM#[6] J61 XDP_BPM7_R
BPM#[7]
R269 R266
h
43.2_1%_04 BUF_CPU_RST#
6
10K_04 D P31X24_1023B_01B
Q7A
2G MTDK5S6R
S H_PROCHOT#
1
3
D
.c
Q8
5G Q7B
16 PLT_RST# S MTDK5S6R G
28 H_PROCHOT#_EC C338
4
MTN7002ZHS3
S3 circuit:- DRAM_RST# to memory
S
R290 47p_50V_NPO_04
R268
C310 *100K_04
should be high during S3
100K_04 1.5V
*68p_50V_NPO_04
CAD Note: Capacitor need to be placed R57

close to buffer output pin R58 *0_04
1K_04
Q2
w
MTN7002ZHS3
CPUDRAMRST# S D R51 1K_04 DDR3_DRAMRST# 9,10
DRAMRST_CNTRL 13
G
R59 C130
4.99K_1%_04 0.047u_10V_X7R_04
w
w
B - 4 Processor 2/7- CLK, MISC

Schematic Diagrams
Processor 3/7- (DDR3)
m
Ivy Bridge Processor 3/7 ( DDR3 )
o
U9C U9D
.c
AU36 BA34
9 M_A_DQ[63:0] SA_CK[0] AV36 M_A_CLK_DDR0 9 10 M_B_DQ[63:0] SB_CK[0] AY34 M_B_CLK_DDR2 10
AG6 SA_CK#[0] AY26 M_A_CLK_DDR#0 9 AL4 SB_CK#[0] AR22 M_B_CLK_DDR#2 10
M_A_DQ0 M_B_DQ0
AJ6 SA_DQ[0] SA_CKE[0] M_A_CKE0 9 AL1 SB_DQ[0] SB_CKE[0] M_B_CKE2 10
M_A_DQ1 M_B_DQ1
M_A_DQ2 AP11 SA_DQ[1] M_B_DQ2 AN3 SB_DQ[1]
M_A_DQ3 AL6 SA_DQ[2] M_B_DQ3 AR4 SB_DQ[2]
M_A_DQ4 AJ10 SA_DQ[3] AT40 M_B_DQ4 AK4 SB_DQ[3] BA36
AJ8 SA_DQ[4] SA_CK[1] AU40 M_A_CLK_DDR1 9 AK3 SB_DQ[4] SB_CK[1] BB36 M_B_CLK_DDR3 10
M_A_DQ5 M_B_DQ5
AL8 SA_DQ[5] SA_CK#[1] BB26 M_A_CLK_DDR#1 9 AN4 SB_DQ[5] SB_CK#[1] BF27 M_B_CLK_DDR#3 10
M_A_DQ6 M_B_DQ6
AL7 SA_DQ[6] SA_CKE[1] M_A_CKE1 9 AR1 SB_DQ[6] SB_CKE[1] M_B_CKE3 10
M_A_DQ7 M_B_DQ7
M_A_DQ8 AR11 SA_DQ[7] M_B_DQ8 AU4 SB_DQ[7]
M_A_DQ9 AP6 SA_DQ[8] M_B_DQ9 AT2 SB_DQ[8]
AU6 SA_DQ[9] AV4 SB_DQ[9]
x
M_A_DQ10 M_B_DQ10
M_A_DQ11 AV9 SA_DQ[10] M_B_DQ11 BA4 SB_DQ[10]
M_A_DQ12 AR6 SA_DQ[11] M_B_DQ12 AU3 SB_DQ[11]
M_A_DQ13 AP8 SA_DQ[12] M_B_DQ13 AR3 SB_DQ[12]
M_A_DQ14 AT13 SA_DQ[13] M_B_DQ14 AY2 SB_DQ[13]
M_A_DQ15 AU13 SA_DQ[14] M_B_DQ15 BA3 SB_DQ[14]
M_A_DQ16 BC7 SA_DQ[15] M_B_DQ16 BE9 SB_DQ[15]
M_A_DQ17 BB7 SA_DQ[16] M_B_DQ17 BD9 SB_DQ[16]
fi
M_A_DQ18 BA13 SA_DQ[17] M_B_DQ18 BD13 SB_DQ[17]
M_A_DQ19 BB11
M_A_DQ20
M_A_DQ21
BA7
BA9
SA_DQ[18]
SA_DQ[19]
SA_DQ[20]
M_B_DQ19 BF12
M_B_DQ20 BF8
M_B_DQ21 BD10
SB_DQ[18]
SB_DQ[19]
SB_DQ[20]
Sheet 4 of 38
M_A_DQ22 BB9
M_A_DQ23 AY13
M_A_DQ24 AV14
SA_DQ[21]
SA_DQ[22]
SA_DQ[23]
SA_CS#[0]
SA_CS#[1]
BB40
BC41 M_A_CS#0 9
M_A_CS#1 9
M_B_DQ22 BD14
M_B_DQ23 BE13
M_B_DQ24 BF16
SB_DQ[21]
SB_DQ[22]
SB_DQ[23]
SB_CS#[0]
SB_CS#[1]
BE41
BE47 M_B_CS#2 10
M_B_CS#3 10 Processor 3/7-
M_A_DQ25 AR14 SA_DQ[24] M_B_DQ25 BE17 SB_DQ[24]
M_A_DQ26 AY17
M_A_DQ27 AR19
SA_DQ[25]
SA_DQ[26]
M_B_DQ26 BE18
M_B_DQ27 BE21
SB_DQ[25]
SB_DQ[26] (DDR3)
a
M_A_DQ28 BA14 SA_DQ[27] M_B_DQ28 BE14 SB_DQ[27]
M_A_DQ29 AU14 SA_DQ[28] AY40 M_B_DQ29 BG14 SB_DQ[28] AT43
SA_DQ[29] SA_ODT[0] M_A_ODT0 9 SB_DQ[29] SB_ODT[0] M_B_ODT2 10
M_A_DQ30 BB14 BA41 M_B_DQ30 BG18 BG47
SA_DQ[30] SA_ODT[1] M_A_ODT1 9 SB_DQ[30] SB_ODT[1] M_B_ODT3 10
M_A_DQ31 BB17 M_B_DQ31 BF19
M_A_DQ32 BA45 SA_DQ[31] M_B_DQ32 BD50 SB_DQ[31]
M_A_DQ33 AR43 SA_DQ[32] M_B_DQ33 BF48 SB_DQ[32]
DDR SYSTEM MEMORY B

M_A_DQ34 AW48 SA_DQ[33] M_B_DQ34 BD53 SB_DQ[33]
DDR SYSTEM MEMORY A
M_A_DQ35 BC48 SA_DQ[34] M_B_DQ35 BF52 SB_DQ[34]
in
M_A_DQ36 BC45 SA_DQ[35] M_B_DQ36 BD49 SB_DQ[35]
M_A_DQ37 AR45 SA_DQ[36] AL11 M_A_DQS#0 M_A_DQS#[7:0] 9 M_B_DQ37 BE49 SB_DQ[36] AL3 M_B_DQS#0 M_B_DQS#[7:0] 10
M_A_DQ38 AT48 SA_DQ[37] SA_DQS#[0] AR8 M_A_DQS#1 M_B_DQ38 BD54 SB_DQ[37] SB_DQS#[0] AV3 M_B_DQS#1
M_A_DQ39 AY48 SA_DQ[38] SA_DQS#[1] AV11 M_A_DQS#2 M_B_DQ39 BE53 SB_DQ[38] SB_DQS#[1] BG11 M_B_DQS#2
M_A_DQ40 BA49 SA_DQ[39] SA_DQS#[2] AT17 M_A_DQS#3 M_B_DQ40 BF56 SB_DQ[39] SB_DQS#[2] BD17 M_B_DQS#3
M_A_DQ41 AV49 SA_DQ[40] SA_DQS#[3] AV45 M_A_DQS#4 M_B_DQ41 BE57 SB_DQ[40] SB_DQS#[3] BG51 M_B_DQS#4
M_A_DQ42 BB51 SA_DQ[41] SA_DQS#[4] AY51 M_A_DQS#5 M_B_DQ42 BC59 SB_DQ[41] SB_DQS#[4] BA59 M_B_DQS#5
M_A_DQ43 AY53 SA_DQ[42] SA_DQS#[5] AT55 M_A_DQS#6 M_B_DQ43 AY60 SB_DQ[42] SB_DQS#[5] AT60 M_B_DQS#6
M_A_DQ44 BB49 SA_DQ[43] SA_DQS#[6] AK55 M_A_DQS#7 M_B_DQ44 BE54 SB_DQ[43] SB_DQS#[6] AK59 M_B_DQS#7
M_A_DQ45 AU49 SA_DQ[44] SA_DQS#[7] M_B_DQ45 BG54 SB_DQ[44] SB_DQS#[7]
M_A_DQ46 BA53 SA_DQ[45] M_B_DQ46 BA58 SB_DQ[45]
M_A_DQ47 BB55 SA_DQ[46] M_B_DQ47 AW59 SB_DQ[46]
M_A_DQ48 BA55
M_A_DQ49 AV56
M_A_DQ50 AP50
M_A_DQ51 AP53
M_A_DQ52 AV54
M_A_DQ53 AT54
M_A_DQ54 AP56
M_A_DQ55 AP52
SA_DQ[47]
SA_DQ[48]
SA_DQ[49]
SA_DQ[50]
SA_DQ[51]
SA_DQ[52]
SA_DQ[53]
SA_DQ[54]
SA_DQS[0]
SA_DQS[1]
SA_DQS[2]
SA_DQS[3]
SA_DQS[4]
SA_DQS[5]
AJ11
AR10
AY11
AU17
AW45
AV51
AT56
M_A_DQS0
M_A_DQS1
M_A_DQS2
M_A_DQS3
M_A_DQS4
M_A_DQS5
M_A_DQS6
h
M_A_DQS[7:0] 9
M_B_DQ48 AW58
M_B_DQ49 AU58
M_B_DQ50 AN61
M_B_DQ51 AN59
M_B_DQ52 AU59
M_B_DQ53 AU61
M_B_DQ54 AN58
M_B_DQ55 AR58
SB_DQ[47]
SB_DQ[48]
SB_DQ[49]
SB_DQ[50]
SB_DQ[51]
SB_DQ[52]
SB_DQ[53]
SB_DQ[54]
SB_DQS[0]
SB_DQS[1]
SB_DQS[2]
SB_DQS[3]
SB_DQS[4]
SB_DQS[5]
AM2
AV1
BE11
BD18
BE51
BA61
AR59
M_B_DQS0
M_B_DQS1
M_B_DQS2
M_B_DQS3
M_B_DQS4
M_B_DQS5
M_B_DQS6
M_B_DQS[7:0] 10
.c
M_A_DQ56 AN57 SA_DQ[55] SA_DQS[6] AK54 M_A_DQS7 M_B_DQ56 AK58 SB_DQ[55] SB_DQS[6] AK61 M_B_DQS7
M_A_DQ57 AN53 SA_DQ[56] SA_DQS[7] M_B_DQ57 AL58 SB_DQ[56] SB_DQS[7]
M_A_DQ58 AG56 SA_DQ[57] M_B_DQ58 AG58 SB_DQ[57]
M_A_DQ59 AG53 SA_DQ[58] M_B_DQ59 AG59 SB_DQ[58]
M_A_DQ60 AN55 SA_DQ[59] M_B_DQ60 AM60 SB_DQ[59]
SA_DQ[60] M_A_A[15:0] 9 SB_DQ[60] M_B_A[15:0] 10
M_A_DQ61 AN52 BG35 M_A_A0 M_B_DQ61 AL59 BF32 M_B_A0
M_A_DQ62 AG55 SA_DQ[61] SA_MA[0] BB34 M_A_A1 M_B_DQ62 AF61 SB_DQ[61] SB_MA[0] BE33 M_B_A1
M_A_DQ63 AK56 SA_DQ[62] SA_MA[1] BE35 M_A_A2 M_B_DQ63 AH60 SB_DQ[62] SB_MA[1] BD33 M_B_A2
SA_DQ[63] SA_MA[2] BD35 M_A_A3 SB_DQ[63] SB_MA[2] AU30 M_B_A3
SA_MA[3] AT34 M_A_A4 SB_MA[3] BD30 M_B_A4
SA_MA[4] AU34 M_A_A5 SB_MA[4] AV30 M_B_A5
SA_MA[5] BB32 M_A_A6 SB_MA[5] BG30 M_B_A6
BD37 SA_MA[6] AT32 M_A_A7 BG39 SB_MA[6] BD29 M_B_A7
w
9 M_A_BS0 BF36 SA_BS[0] SA_MA[7] AY32 10 M_B_BS0 BD42 SB_BS[0] SB_MA[7] BE30
M_A_A8 M_B_A8
9 M_A_BS1 BA28 SA_BS[1] SA_MA[8] AV32 10 M_B_BS1 AT22 SB_BS[1] SB_MA[8] BE28
M_A_A9 M_B_A9
9 M_A_BS2 SA_BS[2] SA_MA[9] BE37 10 M_B_BS2 SB_BS[2] SB_MA[9] BD43
M_A_A10 M_B_A10
SA_MA[10] BA30 M_A_A11 SB_MA[10] AT28 M_B_A11
SA_MA[11] BC30 M_A_A12 SB_MA[11] AV28 M_B_A12
BE39 SA_MA[12] AW41 M_A_A13 AV43 SB_MA[12] BD46 M_B_A13
9 M_A_CAS# BD39 SA_CAS# SA_MA[13] AY28 10 M_B_CAS# BF40 SB_CAS# SB_MA[13] AT26
M_A_A14 M_B_A14
9 M_A_RAS# AT41 SA_RAS# SA_MA[14] AU26 10 M_B_RAS# BD45 SB_RAS# SB_MA[14] AU22
M_A_A15 M_B_A15
9 M_A_WE# SA_WE# SA_MA[15] 10 M_B_WE# SB_WE# SB_MA[15]
w
P31X24_1023B_01B P31X24_1023B_01B
w
Processor 3/7- (DDR3) B - 5

Schematic Diagrams
Processor 4/7- Power

Ivy Bridge Processor 4/7 ( POWER )
m
PROCESSOR CORE POWER
POWER
VCORE
PROCESSOR UNCORE POWER

U9F
o
1.05VS
N38
N34 VCC1 AN48
N30 VCC2 VCCIO1 AN45
N26 VCC3 VCCIO2 AN42 C55 C74
VCC4 VCCIO3 + C308
L40 AN20
L36 VCC5 VCCIO4 AM47 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 560u_2.5V_6.6*6.6*5.9
L33 VCC6 VCCIO5 AM43
L28 VCC7 VCCIO6 AM21
.c
VCORE L25 VCC8 VCCIO7 AM17
K42 VCC9 VCCIO8 AM16
K39 VCC10 VCCIO9 AL48 C58 C54 C57 C42
VCC11 VCCIO10 + C306
C48 C20 C26 C18 K37 AL45
K35 VCC12 VCCIO11 AL26 22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 *220u_6.3V_6.3*6.3*4.2
VCC13 VCCIO12
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
K34 AL22
K32 VCC14 VCCIO13 AL20
K26 VCC17 VCCIO16 AL14 C75 C78 C80 C79 C66
J42 VCC18 VCCIO17 AK51
J40 VCC19 VCCIO18 AK50 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08

VCC20 VCCIO19
PEG AND DDR

J38 AJ47
J37 VCC21 VCCIO20 AJ43
VCC22 VCCIO21
x
J35 AJ25
J34 VCC23 VCCIO22 AJ21
J32 VCC24 VCCIO23 AJ17 C45 C73 C59 C313
C22 C27 C47 C21 J29 VCC25 VCCIO24
J28 VCC26 AJ15 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08
VCC27 VCCIO25
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
J26 AJ14
Sheet 5 of 38 J25
H40
H38
VCC28
VCC29
VCC30
VCCIO26
VCCIO27
VCCIO28
AG51
AG50
AG48
fi
VCC31 VCCIO29
Processor 4/7-
H37 AG21 C52 C312
H35 VCC32 VCCIO30 AG20
H34 VCC33 VCCIO31 AG17 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08
H32 VCC34 VCCIO32 AG16
VCC35 VCCIO33
Power
H29 AG15
H28 VCC36 VCCIO34 AF46
C33 C46 C17 G42 VCC39 VCCIO37 AF16 C56 C81 C77
F42 VCC40 VCCIO38 AE15
VCC41 VCCIO39
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
22u_6.3V_X5R_08
F38 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08 *22u_6.3V_X5R_08
a
F37 VCC42
F34 VCC43
F32 VCC44
F28 VCC45
F26 VCC46
F25 VCC47 AE14 1.05VS_VCCP_F R34 *15mil_short_06
E38 VCC48 VCCIO40 1.05VS
E37 VCC49
E34 VCC50 AD21
in
E32 VCC51 VCCIO41 AD18 1.05VS
VCC52 VCCIO42
CORE SUPPLY
E28 AD16
E26 VCC53 VCCIO43 AC13
D42 VCC54 VCCIO44 AB20 SVID Signals
D39 VCC55 VCCIO45 AB17
D37 VCC56 VCCIO46 AA15
CAD Note: H_CPU_SVIDALRT#_R,H_CPU_SVIDDAT_R 1.05VS
VCORE D34 VCC57 VCCIO47 AA14 Place the PU resistors close to CPU
D32 VCC58 VCCIO48 W17
D27 VCC59 VCCIO49 W16 H_CPU_SVIDALRT# R21 75_04
C32 C50 C29 C37 C30 C42 VCC60 VCCIO50 H_CPU_SVIDCLK R20 *54.9_1%_04
C39 VCC61 H_CPU_SVIDDAT_R R247 130_1%_04
VCC62
10u_6.3V_X5R_06
*10u_6.3V_X5R_06
10u_6.3V_X5R_06
10u_6.3V_X5R_06
*10u_6.3V_X5R_06
C37
C34 VCC63
C32 VCC64
VCC65
h C27
C26
A42
VCC66
VCC67 VIDALERT#
A44
B43
H_CPU_SVIDALRT#_R
H_CPU_SVIDCLK_R
R248
R246
43.2_1%_04
*20mil_04
H_CPU_SVIDALRT# 33
SVID
A39 VCC68 VIDSCLK C44 H_CPU_SVIDCLK 33
H_CPU_SVIDDAT_R R22 *20mil_04
A38 VCC69 VIDSOUT H_CPU_SVIDDAT 33
A35 VCC70
A34 VCC71
A31 VCC72 CAD Note: H_CPU_SVIDCLK_R
A29 VCC73 Place the PU
VCC74
.c
C31 C34 C35 C28 C36 A26
VCC75 resistors close to VR
10u_6.3V_X5R_06
*10u_6.3V_X5R_06
*10u_6.3V_X5R_06
*10u_6.3V_X5R_06
10u_6.3V_X5R_06
AN26
VCCDQ1 AM28 L7 HCB1005KF-121T20
VCCDQ2 . 1.5VS_CPU
C76
1u_6.3V_X5R_04
AN22
VCCPQE1 AM25 L8 HCB1005KF-121T20
VCCPQE2 . 1.05VS
C82
1u_6.3V_X5R_04
w
PJ35 *6mil
1 2
F43 CPU_CORE
SENSE LINES
VCC_SENSE G43 VCORE_VCC_SENSE 33

VSS_SENSE VCORE_VSS_SENSE 33
PR43 100_04
R35 *10_04 1.05VS

AN16
VCCIO_SENSE VCCP_SENSE 32
w
AN17
VSS_SENSE_VCCIO VSSP_SENSE 32
R38 *10_04
BC43
VDDQ_SENSE BA43
VSS_SENSE_VDDQ
P31X24_1023B_01B
w
B - 6 Processor 4/7- Power

Schematic Diagrams
Processor 5/7- GFX PWR
m
o
Ivy Bridge Processor 5/7 ( GRAPHICS POWER )
1.5VS_CPU
POWER
.c
U9G R48
VGFX_CORE
Q1 1K_1%_04
AE46 F45 *AO3402L
VREF SENSE
LINES
AD59 VAXG1 VAXG_SENSE G45 VR1_VCCGT_SENSEA 33 S D
V_SM_VREF V_SM_VREF_CNT
AD58 VAXG2 VSSAXG_SENSE VR1_VSSGT_SENSEA 33
C39 C40 C64 C44 C65
AD56 VAXG3 R46
22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 AD55 VAXG4 R47 C83
G
AD53 VAXG5 *100K_1%_04
VAXG6
0.1u_10V_X5R_04
AD52 1K_1%_04
VAXG7
AD51
AD50 VAXG8
AD48 VAXG9
VAXG10
x
C63 C53 C62 C41 AD47 AY 43 V_SM_VREF R45 *20mil_04 V_SM_VREF_CNT
AC61 VAXG11 SM_VREF SUSB# 14,28,29
22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08 AB59 VAXG12
AB58 VAXG13
AB56 VAXG14 BG33
AB55 VAXG15 VDDQ1 BB28
AB53 VAXG16 VDDQ2 BA40
AB52 VAXG17 VDDQ3 AW26
AB51 VAXG18 VDDQ4 AV41
fi
C60 C38 C61
VAXG19 VDDQ5
DDR3 -1.5V RAILS

AB50 AR40
*22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 AB47
AA46
Y61
VAXG20
VAXG21
VAXG22
VDDQ6
VDDQ7
VDDQ8
AR36
AR34
AR32 1.5VS_CPU
Sheet 6 of 38
VAXG23 VDDQ9
Y48
W61
W56
W55
VAXG24
VAXG25
VAXG26
VDDQ10
VDDQ11
VDDQ12
AR30
AR28
AR26
AN38 C72 C70 C71
5A
C317
Processor 5/7- GFX
GRAPHICS
+
PWR
W53 VAXG27 VDDQ13 AN34
W52 VAXG28 VDDQ14 AN30 *10u_6.3V_X5R_06 10u_6.3V_X5R_06 10u_6.3V_X5R_06
VAXG29 VDDQ15 *220u_6.3V_6.3*6.3*4.2
W51 AM40
a
W50 VAXG30 VDDQ16 AM36
V59 VAXG31 VDDQ17 AM33
V58 VAXG32 VDDQ18 AL42
V56 VAXG33 VDDQ19 AL38 C69 C67 C68
V55 VAXG34 VDDQ20 AL34
V53 VAXG35 VDDQ21 AL30 10u_6.3V_X5R_06 10u_6.3V_X5R_06 10u_6.3V_X5R_06
V52 VAXG36 VDDQ22 AJ 40
VAXG38 VDDQ24
in
V50 AJ 33
V47 VAXG40 VDDQ26
U46 VAXG41 W20
T61 VAXG42 VCCSA1 V21
T48 VAXG45 VCCSA4 V16 0.85VS
P61 VAXG46 VCCSA5 U15
P56 VAXG47
VAXG48
SA RAIL VCCSA6
VCCSA7
R21 6A
P55 R18
P53 VAXG49 VCCSA8 R16
P52 VAXG50 VCCSA9 P20 C51 C49 C43
P51 VAXG51 VCCSA10 P17
VAXG52 VCCSA11
P50
P48
P47
N45
VAXG53
VAXG54
VAXG55
VAXG56
h VCCSA12
VCCSA13
VCCSA14
VCCSA15
VCCSA16
N22
N20
N16
L21
L17
U10 VCCSA_SENSE
10u_6.3V_X5R_06 *10u_6.3V_X5R_06 10u_6.3V_X5R_06
R29
1.05VS
R28
1.8V RAIL
.c
1.8VS VCCSA_SENSE
1.2A *10K_04 *10K_04
BC4
BC1 VCCPLL1 D48
MISC
BB3 VCCPLL2 VCCSA_VID[0] D49 VCCSA_VID0 31

C309 C307 C311 VCCSA_VID1 31
VCCPLL3 VCCSA_VID[1]
10u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04
R30 R27
BC22 H_SNB_IVB#_PWRCTRL_R R37 100K_1%_04
VCCIO_SEL 3.3V 1.5V
10K_04 10K_04
P31X24_1023B_01B
w
C85 C84
*0.1u_10V_X5R_04
*0.1u_10V_X5R_04
1.5VS_CPU
w
w
Processor 5/7- GFX PWR B - 7

Schematic Diagrams
Processor 6/7- GND
m
Ivy Bridge Processor 6/7 ( GND )
o
U9H U9I
BG53 AP51
BG49 VSS1 VSS81 AP10
.c
BG45 VSS2 VSS82 AP7 AC46 L43
BG41 VSS3 VSS83 AN54 AC14 VSS161 VSS234 L38
BG24 VSS6 VSS86 AN43 AB61 VSS164 VSS237 L26
CAD Note: 0 ohm resistor BG13 VSS9 VSS89 AN33 AB18 VSS167 VSS240 L16
should be placed close BG9 VSS10 VSS90 AN28 AB16 VSS168 VSS241 K51
BE5 VSS11 VSS91 AN25 AA56 VSS169 VSS242 K21

to CPU BD56 VSS12 VSS92 AN21 AA55 VSS170 VSS243 K11
BD52 VSS13 VSS93 AN1 AA53 VSS171 VSS244 K8
x
BD48 VSS14 VSS94 AM58 AA52 VSS172 VSS245 J55
BD36 VSS17 VSS97 AM42 AA13 VSS175 VSS248 H58
BD23 VSS20 VSS100 AM30 Y 59 VSS178 VSS251 H17
fi
BD19 VSS21 VSS101 AM26 Y 58 VSS179 VSS252 H14
Sheet 7 of 38 BD16
BD12
VSS22
VSS23
VSS24
VSS102
VSS103
VSS104
AM22
AM20
Y 47
Y4
VSS180
VSS181
VSS182
VSS253
VSS254
VSS255
H10
H4
BD8 AM13 W46 G61
Processor 6/7- GND BC57
BC13
BC5
VSS25
VSS26
VSS27
VSS105
VSS106
VSS107
AM4
AL61
AL47
W21
W18
W15
VSS183
VSS184
VSS185
VSS256
VSS257
VSS258
G51
G48
G6
BB53 VSS28 VSS108 AL43 W13 VSS186 VSS259 F55
BA51 VSS29 VSS109 AL40 W8 VSS187 VSS260 F40
a
BA48 VSS30 VSS110 AL36 V61 VSS188 VSS261 F35
BA32 VSS31 VSS111 AL33 V20 VSS189 VSS262 F29
BA26 VSS32 VSS112 AL28 U13 VSS190 VSS263 F19
BA21 VSS33 VSS113 AL25 U8 VSS191 VSS264 F15
BA17 VSS34 VSS114 AL21 T56 VSS192 VSS265 F13
BA11 VSS35 VSS115 AL17 T55 VSS193 VSS266 E40
BA1 VSS36 VSS116 AL13 T53 VSS194 VSS267 E35
AY 58 VSS37
VSS VSS117 AL10 T52 VSS195
VSS VSS268 E29
in
AY 55 VSS38 VSS118 AK52 T51 VSS196 VSS269 E25
AY 49 VSS39 VSS119 AK1 T50 VSS197 VSS270 E3
AY 45 VSS40 VSS120 AJ48 T47 VSS198 VSS271 D58
AY 41 VSS41 VSS121 AJ45 T1 VSS199 VSS272 D54
AY 36 VSS42 VSS122 AJ42 R46 VSS200 VSS273 D50
AY 9 VSS46 VSS126 AJ26 P59 VSS204 VSS277 D35
AY 4 VSS47 VSS127 AJ22 P58 VSS205 VSS278 D29
AW61 VSS48 VSS128 AJ20 P21 VSS206 VSS279 D26
VSS49 VSS129 VSS207 VSS280
AW43
AW13
AW7
AV55
AV48
AV40
AV34
AV22
h VSS50
VSS51
VSS52
VSS53
VSS54
VSS55
VSS56
VSS130
VSS131
VSS132
VSS133
VSS134
VSS135
VSS136
AJ16
AJ13
AJ7
AH58
AH4
AG61
AG52
AG47
P18
P16
P14
P9
N61
N56
N52
N51
VSS208
VSS209
VSS210
VSS211
VSS212
VSS213
VSS214
VSS281
VSS282
VSS283
VSS284
VSS285
VSS286
D22
D18
D14
D10
D6
D4
C40
.c
AV21 VSS57 VSS137 AG18 N48 VSS215 VSS287 C35
AV17 VSS58 VSS138 AG14 N47 VSS216 VSS288 C29
AU51 VSS59 VSS139 AG10 N43 VSS217 VSS289 A53
AU32 VSS60 VSS140 AG7 N40 VSS218 VSS290 A49
AU28 VSS61 VSS141 AF59 N36 VSS219 VSS291 A45
AT58 VSS65 VSS145 AF53 N21 VSS223 VSS295 A28
VSS68 VSS148 VSS226 VSS298
w
AT36 AF50 M58 A17

AT19 VSS69 VSS149 AF48 M15 VSS227 VSS299 A13
AT14 VSS70 VSS150 AF47 M11 VSS228 VSS300 A9
AT4 VSS71 VSS151 AF21 M6 VSS229 VSS301
AR61 VSS72 VSS152 AF17 M4 VSS230
AR48 VSS73 VSS153 AF1 L61 VSS231
AR41 VSS74 VSS154 AE13 L48 VSS232
AR21 VSS75 VSS155 AE8 VSS233
AR17 VSS76 VSS156 AD61
VSS77 VSS157
w
AR13 AD20
AR7 VSS78 VSS158 AD17
AP55 VSS79 VSS159 AD4
VSS80 VSS160
P31X24_1023B_01B P31X24_1023B_01B
w
B - 8 Processor 6/7- GND

Schematic Diagrams
Processor 7/7- RSVD
m
Ivy Bridge Processor 7/7 ( RESERVED )
CFG Straps for Processor
o
PEG Static Lane Reversal - CFG2 is for the 16x
CFG2 1:(Default) Normal Operation; Lane #

definition matches socket pin map definition U9E
.c
0:Lane Reversed
F48
CFG0 B50 VCC_DIE_SENSE
CFG2 R254 *1K_04 C51 CFG[0]
CFG2 B54 CFG[1] A4
D53 CFG[2] DC_TEST_A4 C4
CFG4 A51 CFG[3] DC_TEST_C4 D3
CFG5 C53 CFG[4] DC_TEST_D3 D1
CFG6 C55 CFG[5] DC_TEST_D1 A58
CFG7 H49 CFG[6] DC_TEST_A58 A59
CFG[7] DC_TEST_A59
x
A55 C59
H51 CFG[8] DC_TEST_C59 A61
Display Port Presence Strap K49 CFG[9] DC_TEST_A61 C61
CFG
K53 CFG[10] DC_TEST_C61 D61
1:(Default) Disabled; No Physical Display Port F53 CFG[11] DC_TEST_D61 BD61
CFG4 attached to Embedded Display Port G53
L51
CFG[12]
CFG[13]
DC_TEST_BD61
DC_TEST_BE61
BE61
BE59 Sheet 8 of 38
0:Enabled; An external Display Port device is F51 CFG[14] DC_TEST_BE59 BG61
fi
CFG[15] DC_TEST_BG61
connected to the Embedded Display Port D52
L53 CFG[16]
CFG[17]
DC_TEST_BG59
DC_TEST_BG58
BG59
BG58
BG4
Processor 7/7-
DC_TEST_BG4 BG3
CFG4 R252 *1K_04

H45
DC_TEST_BG3
DC_TEST_BE3
DC_TEST_BG1
BE3
BG1
BE1
RSVD
H_CPU_RSVD1
H_CPU_RSVD2 K45 VAXG_VAL_SENSE DC_TEST_BE1 BD1
H_CPU_RSVD3 H43 VSSAXG_VAL_SENSE DC_TEST_BD1
VCC_VAL_SENSE
a
H_CPU_RSVD4 K43
VSS_VAL_SENSE
BG26
BG22 RSVD1
SB_VREFDQ BG7 RSVD2
RESERVED
BF23 RSVD3 BG57
10mil BE26 RSVD4 VSS_NCTF1 BG5
in
BE24 RSVD5 VSS_NCTF2 BE58
BE22 RSVD6 VSS_NCTF3 BE4
SA_VREFDQ BE7 RSVD7 VSS_NCTF4 BD59
BD26 RSVD8 VSS_NCTF5 BD3
10mil BD25 RSVD9 VSS_NCTF6 BC61
PCIE Port Bifurcation Straps BD22 RSVD10 VSS_NCTF7 E61
BD21 RSVD11 VSS_NCTF8 E1
BB21 RSVD12 VSS_NCTF9 D59
11: (Default) x16 - Device 1 functions 1 and 2 disabled BB19 RSVD13 VSS_NCTF10 C58
10: x8, x8 - Device 1 function 1 enabled ; function 2 disabled BA22 RSVD14 VSS_NCTF11 C3
BA19 RSVD15 VSS_NCTF12 A57
CFG[6:5] 01: Reserved - (Device 1 function 1 disabled ; function 2 enabled) AY 22
AY 21
RSVD16
RSVD17
VSS_NCTF13
VSS_NCTF14
A5
00: x8,x4,x4 - Device 1 functions 1 and 2 enabled
CFG5
CFG6
R253
R255
*1K_04
*1K_04
h AV19
AU21
AU19
AT49
AT21
AM15
AM14
RSVD18
RSVD19
RSVD20
RSVD21
RSVD22
RSVD23
RSVD24
RSVD25 BCLK_ITP
N59
.c
AH2 N58
AG13 RSVD26 BCLK_ITP#
W14 RSVD27
U14 RSVD28
P13 RSVD29
N50 RSVD30
N42 RSVD31
M14 RSVD32
M13 RSVD33
L47 RSVD34
On CRB L45 RSVD35
H_SNB_IVB#_PWRCTRL = low, 1.0V L42 RSVD36
K48 RSVD37
w
H_SNB_IVB#_PWRCTRL = high/NC, 1.05V K24 RSVD38

H48 RSVD39
RSVD40
P31X24_1023B_01B
PEG DEFER TRAINING
1: (Default) PEG Train immediately following xxRESETB de assertion
CFG7
w
0: PEG Wait for BIOS for training
CFG7 R31 *1K_04

w
Processor 7/7- RSVD B - 9

Schematic Diagrams
DDR3 SO-DIMM_0
m
SO-DIMM A
o
C134 *10p_50V_NPO_04
M_A_CLK_DDR 0 M_A_CLK_D DR#0
JDIMM2A
4 M_A_A[15:0] M_A_A0 98 5 M_A_DQ4 M_A_DQ[63:0] 4
C125 *10p_50V_NPO_04 JDIMM2B
M_A_CLK_DDR 1 M_A_CLK_D DR#1 M_A_A1 97 A0 DQ0 7 M_A_DQ1
M_A_A2 96 A1 DQ1 15 M_A_DQ3
.c
M_A_A3 95 A2 DQ2 17 M_A_DQ2 1.5V
M_A_A4 92 A3 DQ3 4 M_A_DQ5
M_A_A5 91 A4 DQ4 6 M_A_DQ0 75 44
M_A_A6 90 A5 DQ5 16 M_A_DQ6 76 VD D1 VSS16 48
Layout Note: M_A_A9 85 A8 DQ8 23 M_A_DQ9 87 VD D4 VSS19 55
signal/space/signal: M_A_A11 84 A10/AP DQ10 35 M_A_DQ15 93 VD D6 VSS21 61
8/4/8 M_A_A13 119 A12/BC# DQ12 24 M_A_DQ13 3.3VS 99 VD D8 VSS23 66

M_A_A15 78 A14 DQ14 36 M_A_DQ10 20mils 105 VD D10 VSS25 72
A15 DQ15 VD D11 VSS26
x
39 M_A_DQ20 106 127
109 DQ16 41 M_A_DQ17 C129 C 132 111 VD D12 VSS27 128
4 M_A_BS0 108 BA0 DQ17 51 M_A_DQ23 112 VD D13 VSS28 133
1u_6.3V_X5R_04 *0.1u_16V_Y 5V_04
4 M_A_CS#0 S0# DQ20 VD D16 VSS31
Sheet 9 of 38 4
4
4 M_A_CS#1
M_A_C LK_DDR0
M_A_C LK_DDR#0
121
101
103
102
S1#
C K0
C K0#
DQ21
DQ22
DQ23
42
50
52
57
M_A_DQ21
M_A_DQ19
M_A_DQ18
123
124 VD D17
VD D18
VSS32
VSS33
VSS34
139
144
145
fi
M_A_DQ29 199 150
4 M_A_C LK_DDR1
DDR3 SO-DIMM_0 4 M_A_C LK_DDR#1
4
4
M_A_CKE0
M_A_CKE1
104
73
74
C K1
C K1#
C KE0
C KE1
DQ24
DQ25
DQ26
DQ27
59
67
69
M_A_DQ25
M_A_DQ26
M_A_DQ27
3.3VS 77
122
VD DSPD
NC1
NC2
VSS35
VSS36
VSS37
VSS38
151
155
156
115 56 M_A_DQ28 R61 *10K_04 125 161
4 M_A_CAS# 110 C AS# DQ28 58 M_A_DQ24 NCTEST VSS39 162
4 M_A_RAS# 113 R AS# DQ29 68 M_A_DQ30 198 VSS40 167
4 M_A_WE# SA0_DIM0 197 WE# DQ30 70 M_A_DQ31 10 TS#_DIMM0_1 30 EVENT# VSS41 168
SA1_DIM0 201 SA0 DQ31 129 M_A_DQ37 3,10 DDR3_DRAMRST# RESET# VSS42 172
202 SA1 DQ32 131 M_A_DQ33 C99 1u_6.3V_X5R_04 VSS43 173
10,13 SMB_CLK 200 SCL DQ33 141 M_A_DQ38 MVREF_DQA 1 VSS44 178
C118 *0.1u_16V_Y 5V_04
10,13 SMB_DATA SDA DQ34 VR EF_DQ VSS45
a
143 M_A_DQ35 126 179
116 DQ35 130 M_A_DQ32 VR EF_CA VSS46 184
4 M_A_ODT0 120 ODT0 DQ36 132 M_A_DQ36 MVREF_DIM0 VSS47 185
C128 1u_6.3V_X5R_04
4 M_A_ODT1 ODT1 DQ37 140 M_A_DQ39 2 VSS48 189
C131 *0.1u_16V_Y 5V_04
11 DQ38 142 M_A_DQ34 3 VSS1 VSS49 190
28 D M0 DQ39 147 M_A_DQ46 8 VSS2 VSS50 195
46 D M1 DQ40 149 M_A_DQ40 9 VSS3 VSS51 196
63 D M2 DQ41 157 M_A_DQ43 13 VSS4 VSS52
136 D M3 DQ42 159 M_A_DQ42 14 VSS5
in
153 D M4 DQ43 146 M_A_DQ41 19 VSS6
170 D M5 DQ44 148 M_A_DQ44 20 VSS7 VTT_MEM
187 D M6 DQ45 158 M_A_DQ47 25 VSS8
D M7 DQ46 160 M_A_DQ45 26 VSS9 203
4 M_A_DQS[7:0] M_A_D QS0 12 DQ47 163 M_A_DQ49
CLOSE TO SO-DIMM_0 31 VSS10 VTT1 204
M_A_D QS1 29 D QS0 DQ48 165 M_A_DQ48 32 VSS11 VTT2
M_A_D QS2 47 D QS1 DQ49 175 M_A_DQ50 37 VSS12 GND1
M_A_D QS3 64 D QS2 DQ50 177 M_A_DQ54 38 VSS13 G1 GND2
M_A_D QS4 137 D QS3 DQ51 164 M_A_DQ53 R63 1K_1%_04 MVREF_DIM0 43 VSS14 G2
M_A_D QS5 154 D QS4 DQ52 166 M_A_DQ52 1.5V VSS15
M_A_D QS6 171 D QS5 DQ53 174 M_A_DQ55 DDR RK-20401-TR4B
M_A_D QS7 188 D QS6 DQ54 176 M_A_DQ51 R62 C124
D QS7 DQ55 181 M_A_DQ56
4 M_A_DQS#[7:0] M_A_D QS#0 10 DQ56 183 M_A_DQ59 1K_1%_04 0.1u_10V_X5R_04
3.3VS
RN10
10K_8P4R_04
1
2
3
4
8 SA0_DIM0
7 SA1_DIM0
6
5 SA0_DIM1 10
SA1_DIM1 10
h M_A_D QS#1
M_A_D QS#2
M_A_D QS#3
M_A_D QS#4
M_A_D QS#5
M_A_D QS#6
M_A_D QS#7
27
45
62
135
152
169
186
D QS0#
D QS1#
D QS2#
D QS3#
D QS4#
D QS5#
D QS6#
D QS7#
DQ57
DQ58
DQ59
DQ60
DQ61
DQ62
DQ63
191
193
180
182
192
194
M_A_DQ63
M_A_DQ61
M_A_DQ60
M_A_DQ57
M_A_DQ58
M_A_DQ62
CLOSE TO SO-DIMM_0
.c
DDRR K-20401-TR4B
R53 1K_1%_04 MVREF_DQA

VTT_MEM 1.5V
1.5V
R60 C122
C336 C133 C 123 C 333 C334 1K_1%_04 0.1u_10V_X5R_04

+ C315 +
C357 + C316
10u_6.3V_X5R_08 *1u_6.3V_X5R_04 1u_6.3V_X5R_04 * 1u_6.3V_X5R_04 1u_6.3V_X5R_04
*560u_2.5V_6.6*6.6*5.9 *220u_6.3V_6.3*6.3*4.2 560u_2.5V_6.6*6.6* 5.9
1.5V
w
C137 C138 C 127 C 87 C126 C105 C111 C100 C101 C136
0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 * 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04
1.5V
w
C140 C145 C 147 C 121 C142 C143 C141 C139
*10u_6.3V_X5R_06 22u_6.3V_X5R_08 22u_6.3V_X5R_08 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04

w
B - 10 DDR3 SO-DIMM_0
Schematic Diagrams
DDR3 SO-DIMM_1
m
SO-DIMM B
JDIMM1B
o
C 98 *10p_50V_N PO_04
M_B_C LK_DD R 2 M_B_C LK_D DR #2
JDIMM1A 1. 5V
4 M_B_A[15:0] M_B_A0 98 5 M_B_D Q0 M_B_D Q[63:0] 4
C 95 *10p_50V_N PO_04
M_B_C LK_DD R 3 M_B_C LK_D DR #3 M_B_A1 97 A0 D Q0 7 M_B_D Q1 75 44
M_B_A2 96 A1 D Q1 15 M_B_D Q6 76 VDD 1 VSS16 48
.c
Layout Note: M_B_A9 85 A8 D Q8 23 M_B_D Q13 99 VDD 8 VSS23 66
signal/space/signal: M_B_A11 84 A10/AP D Q10 35 M_B_D Q10 105 VDD 10 VSS25 72
8/4/8 M_B_A13 119 A12/BC # D Q12 24 M_B_D Q8 111 VDD 12 VSS27 128
A15 D Q15 39 M_B_D Q19 118 VDD 15 VSS30 138
109 D Q16 41 M_B_D Q22 123 VDD 16 VSS31 139
4 M_B_BS0 108 BA0 D Q17 51 M_B_D Q21 124 VDD 17 VSS32 144
3.3VS
x
4 M_B_BS1 79 BA1 D Q18 53 M_B_D Q17 VDD 18 VSS33 145
4 M_B_BS2 114 BA2 D Q19 40 M_B_D Q18 20mils 199 VSS34 150
4 M_B_C S#2 121 S0# D Q20 42 M_B_D Q23 VDD SPD VSS35 151
4 M_B_C S#3 101 S1# D Q21 50 M_B_D Q16 77 VSS36 155
C117 C 104
4 M_B_C LK_DD R2 103 CK0 D Q22 52 M_B_D Q20 122 NC 1 VSS37 156
4
4
4
M_B_C LK_DD R#2
M_B_C LK_DD R3
M_B_C LK_DD R#3
102
104
73
CK0#
CK1
CK1#
D Q23
D Q24
D Q25
57
59
67
M_B_D Q25
M_B_D Q24
M_B_D Q26
1u_6.3V_X5R _04 *0.1u_16V_Y 5V_04 125
198
NC 2
NC TEST
VSS38
VSS39
VSS40
161
162
167
Sheet 10 of 38
fi
4 M_B_C KE2 CKE0 D Q26 9 TS#_D IMM0_1 EVEN T# VSS41
4 M_B_C KE3
4
4
M_B_C AS#
M_B_R AS#
74
115
110
CKE1
CAS#
RAS#
D Q27
D Q28
D Q29
69
56
58
M_B_D Q27
M_B_D Q29
M_B_D Q28 C 116
3,9 D DR 3_DR AMRST#
1u_6.3V_X5R _04
30
RESET# VSS42
VSS43
VSS44
168
172
173
DDR3 SO-DIMM_1
113 68 M_B_D Q30 C 102 *0.1u_16V_Y 5V_04 MVR EF_D QB 1 178
4 M_B_W E# SA0_D IM1 197 WE# D Q30 70 M_B_D Q31 126 VREF_DQ VSS45 179
9 SA0_DI M1 SA1_D IM1 201 SA0 D Q31 129 M_B_D Q33 VREF_CA VSS46 184
9 SA1_DI M1 202 SA1 D Q32 131 M_B_D Q36 MVR EF_D IM1 VSS47 185
C 97 1u_6.3V_X5R _04
9,13 SMB_C LK 200 SCL D Q33 141 M_B_D Q34 2 VSS48 189
C 96 *0.1u_16V_Y 5V_04
9,13 SMB_D ATA SDA D Q34 143 M_B_D Q35 3 VSS1 VSS49 190
116 D Q35 130 M_B_D Q37 8 VSS2 VSS50 195
a
4 M_B_ODT2 120 OD T0 D Q36 132 M_B_D Q32 9 VSS3 VSS51 196
4 M_B_ODT3 OD T1 D Q37 140 M_B_D Q39 13 VSS4 VSS52
11 D Q38 142 M_B_D Q38 14 VSS5
28 DM0 D Q39 147 M_B_D Q40 19 VSS6
46 DM1 D Q40 149 M_B_D Q41 20 VSS7 VTT_MEM
63 DM2 D Q41 157 M_B_D Q47 25 VSS8
136 DM3 D Q42 159 M_B_D Q46 26 VSS9 203
153 DM4 D Q43 146 M_B_D Q44
CLOSE TO SO-DIMM1 31 VSS10 VTT1 204
170 DM5 D Q44 148 VSS11 VTT2
in
M_B_D Q45 32
187 DM6 D Q45 158 M_B_D Q42 37 VSS12 GN D1
DM7 D Q46 160 M_B_D Q43 38 VSS13 G1 GN D2
4 M_B_D QS[ 7: 0] M_B_DQS0 12 D Q47 163 M_B_D Q52 MVR EF_D IM1 43 VSS14 G2
R 55 1K_1%_04
M_B_DQS1 29 DQS0 D Q48 165 M_B_D Q53 1.5V VSS15
M_B_DQS2 47 DQS1 D Q49 175 M_B_D Q50 DD R RK-20401-TP8D
M_B_DQS3 64 DQS2 D Q50 177 M_B_D Q51 R 52 C 94
M_B_DQS4 137 DQS3 D Q51 164 M_B_D Q49
M_B_DQS5 154 DQS4 D Q52 166 M_B_D Q48 1K_1%_04 0.1u_10V_X5R _04
M_B_DQS6 171 DQS5 D Q53 174 M_B_D Q55
M_B_DQS7 188 DQS6 D Q54 176 M_B_D Q54
DQS7 D Q55 181 M_B_D Q57
4 M_B_D QS#[ 7: 0] M_B_DQS#0 10 D Q56 183 M_B_D Q61
M_B_DQS#1 27 DQS0# D Q57 191 M_B_D Q58
M_B_DQS#2
M_B_DQS#3
M_B_DQS#4
M_B_DQS#5
M_B_DQS#6
M_B_DQS#7
45
62
135
152
169
186
DQS1#
DQS2#
DQS3#
DQS4#
DQS5#
DQS6#
DQS7#
DD R RK-20401-TP8D
D Q58
D Q59
D Q60
D Q61
D Q62
D Q63
193
180
182
192
194
M_B_D Q62
M_B_D Q60
M_B_D Q56
M_B_D Q63
M_B_D Q59 h 1.5V
R 54
CLOSE TO SO-DIMM_1
1K_1%_04 MVR EF_D QB

.c
VTT_MEM R 56 C 120
1K_1%_04 0.1u_10V_X5R _04
C 327 C119 C 103 C 323 C325
10u_6.3V_X5R _08 *1u_6.3V_X5R _04 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 1u_6.3V_X5R_04
1.5V
w
C 319 C146 C 314 C 92 C109 C 113 C 112 C110
*10u_6.3V_X5R_08 *10u_6.3V_X5R _08 *10u_6.3V_X5R _08 1u_6.3V_X5R _04 1u_6.3V_X5R _04 1u_6.3V_X5R_04 *1u_6.3V_X5R _04 1u_6.3V_X5R _04
Layout Note:
1.5V SO-DIMM_1 is placed farther from the GMCH than SO-DIMM_0
w
C 93 C88 C 89 C 90 C91 C 108 C 107 C106 C115 C 114
*0.1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 0.1u_16V_Y5V_04 *0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 *0. 1u_16V_Y 5V_04 0.1u_16V_Y 5V_04 0. 1u_16V_Y 5V_04 0.1u_16V_Y5V_04
w
DDR3 SO-DIMM_1 B - 11
Schematic Diagrams
PANEL, INVERTER, CRT
m
PANEL CONNECTOR 3.3VS
PANEL POWER
o
R233 2.2K_04
R234 2.2K_04
VIN_LCD
J_LCD1
1 2 P_DDC_DATA
3 1 2 4 P_DDC_DATA 15 3.3VS PLVDD
P_DDC_CLK
5 3 4 6 P_DDC_CLK 15
7 5 6 8 BRIGHTNESS_R U7
2A 2A
.c
9 7 8 10 4 1
C6
*0.01u_50V_X7R_04
C7
11 9 10 12 INV_BLON 5 VIN VOUT
0.1u_50V_Y5V_06 13 11 12 14 VIN C291
LVDS-LCLKN 15 13 14 16 LVDS-L2N C290
15 LVDS-LCLKN LVDS-LCLKP 17 15 16 18 LVDS-L2P LVDS-L2N 15 NB_ENAVDD 3 2 *1u_6.3V_X5R_04
15 LVDS-LCLKP 19 17 18 20 LVDS-L2P 15 EN GND
1u_6.3V_X5R_04
LVDS-L1N 21 19 20 22 NCT3522U
15 LVDS-L1N LVDS-L1P 23 21 22 24
3.3VS R239
15 LVDS-L1P 25 23 24 26
CLOSE TO LVDS CONN. PIN 15 LVDS-L0N
LVDS-L0N 27 25
27
26
28
28 100K_04
LVDS-L0P 29 30
15 LVDS-L0P 29 30 C284
50238-0307N-001
0.1u_16V_Y 5V_04
x
PLVDD
C288 C285
4.7u_6.3V_X5R_06 0.1u_16V_Y 5V_04
Sheet 11 of 38 PJ13 OPEN_2A
fi
PANEL, INVERTER, R231
R232
*10K_04
*20mil_04
PLVDD
VIN
C287 C286
1
3
2
8
7
VIN_LCD
CRT BRIGHTNESS_R A C R237 *10mil_short_04 2 6

BRIGHTNESS 28 1 5
*0.1u_50V_Y5V_06
*0.1u_50V_Y5V_06
AC
D9 *RB751S-40C2 R236 *0_04 Q4
PCH_BRIGHTNESS 15
D10 *P2003EVG
C289
4
3.3V R230
*BAV99 RECTIFIER
C
*220_06
a
*0.22u_50V_Y 5V_06 R240
3.3V
R235 6
C296 *10K_04 D
*0.1u_16V_Y 5V_04 *1M_04 Q6A
LVDD_EN# 2 G *MTDN7002ZHS6R
R238 *100K_04 3 S
D Q6B 1
5 G *MTDN7002ZHS6R
in
S
CRT
D
Q5 4
J_CRT1 *MTN7002ZHS3
C10556-11505-L G
15,28 NB_ENAVDD
S
DAC_RED L6 *10mil_short_04 L5 FCM1005MF-600T01 FRED 1
15 DAC_RED 9
DAC_GREEN L4 *10mil_short_04 L3 FCM1005MF-600T01 FGRN 2
15 DAC_GREEN 10
24 mil
DAC_BLUE L2 *10mil_short_04 L1 FCM1005MF-600T01 FBLUE 3
15 DAC_BLUE 11
C15 C11 C9 C14 C12 C8 C304 C303 C302 4
12 DDCDATA
*6p_50V_NPO_04
*6p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
22p_50V_NPO_04
5
*6p_50V_NPO_04
R15 R7 R5
h 6
13 HSYNC
150_1%_04
150_1%_04
150_1%_04
14 VSY NC
7
15 DDCLK
8 3.3V
1000p_50V_X7R_04
1000p_50V_X7R_04
3.3V
220p_50V_NPO_04
220p_50V_NPO_04
GND1
GND2
R159 *100K_04 U5A
14
3.3VS 5VS_CRT
.c
74LVC08PW U5B
14
BKL_EN 1 74LVC08PW
28 BKL_EN 3 BLON1 4 3.3V
C13
2 6 BLON2
C10
C299
C298
R245 R244 R242 R8 BLON
15 BLON 5
2.2K_04 2.2K_04 2.2K_04 2.2K_04 R160 100K_04
7
U5C
14
7
U8 74LVC08PW
10 9 DDCDATA 9
15 DAC_DDCADATA DDC_IN1 DDC_OUT1 3.3V 8 INV_BLON
R163 *100K_04
11 12 DDCLK 10
15 DAC_DDCACLK DDC_IN2 DDC_OUT2 U5D
14
13 14 HSY NC_C R6 HSY NC 17 SB_BLON
33_04 74LVC08PW
7
15 DAC_HSY NC SYNC_IN1 SY NC_OUT1 12 R121 C161
15 DAC_VSY NC 23,28 LID_SW#
w
15 16 VSYNC_C R243 33_04 VSY NC 11 LID_SW#1

5VS_CRT SYNC_IN2 SY NC_OUT2 13
*0.1u_16V_Y5V_04
100K_04
1 3 FRED 14,28,29,33 ALL_SYS_PWRGD
5VS R16 *1_04
VCC_SY NC VIDEO_1
7
A C 2 4 FGRN
D11 RB751S-40C2 VCC_VIDEO VIDEO_2
7 5 FBLUE
3.3VS VCC_DDC VIDEO_3
C301 C305 BY P 8 6
BYP GND
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
TPD7S019
w
C300 ESD+LEVEL SHIFT+BUFFER

0.1u_16V_Y 5V_04
M 6-02-47721-B60
S 6-02-07019-B20
w
B - 12 PANEL, INVERTER, CRT

Schematic Diagrams
PCH 1/9- RTC, HDA, SATA
m
NO REBOOT STRAP
20mils
VDD3
D3
BAT54CS3
1 A
C 3
RTCVCC
C268
20mils
1u_6.3V_X5R_04
PantherPoint - M (HDA,JTAG,SATA) NO REBOOT STRAP: HDA_SPKR High Enable
HDA_SPKR R97 *1K_04
3.3VS
RTC_VBAT_1 2 A C341
R105 12p_50V_NPO_04 iTPM ENABLE/DISABLE
o
20K_1%_04 TPM FUNCTION:SPI_SI High Enable
R219
6-22-32R76-0B2 SPI_SI R173 *1K_04
2
1
1K_04 6-22-32R76-0BG R308
C163 JOPEN1 X1 SERIRQ R120 10K_04
RTC_VBAT 1u_6.3V_X5R_04 *OPEN_10mil-1MM MC-306_32.768KHz 10M_04 U16A
RTC CLEAR
3
4
R122 C340 RTC_X1 A20 C38
RTCX1 FWH0 / LAD0 A38 LPC_AD0 28
20K_1%_04 12p_50V_NPO_04 LPC_AD1 28
.c
C20 FWH1 / LAD1 B37
LPC
J_RTC2 J_RTC1 RTC_X2
10mils RTCX2 FWH2 / LAD2 C37 LPC_AD2 28
1 1 R108 C166
Zo= RTC_RST# D20 FWH3 / LAD3 LPC_AD3 28
RTCRST# D36
2 2
50£[¡Ó15% G22 FWH4 / LFRAME# LPC_FRAME# 28 3.3VS
1M_04 1u_6.3V_X5R_04 SRTC_RTC#
*BHKB7410AP2PT W5000102-001 SRTCRST# E36
K22 LDRQ0# K36
RTC
SM_INTRUDER# Board ID R176 *10K_04
INTRUDER# LDRQ1# / GPIO23 R169 10K_04
R283 330K_04 PCH_INTVRMEN C17 V5 SERIRQ
RTCVCC INTVRMEN SERIRQ SERIRQ 28
INTVRMEN- Integrated SUS 1.05V VRM Enable
High - Enable Internal VRs /Low - Enable External VRs AM3 SATA_RXN0
HDA_BITCLK_R N34 SATA0RXN AM1 SATA_RXP0
C201 22p_50V_NPO_04 HDA_BCLK SATA0RXP AP7 SATA_TXN0 SATA HDD
SATA 6G
x
R153 1K_04 HDA_SY NC_R L34 SATA0TXN AP5 SATA_TXP0
3.3A_1.5A_HDA_IO
27
27
HDA_SDOUT
HDA_BITCLK
R319
R164
33_04
33_04
HDA_SDOUT_R
HDA_BITCLK_R
PLL ODVR VOLTAGE: HDA_SYNC
LOW-1.8 V (DEFAULT) HIGH-15V
27 HDA_SPKR
T10
K34
HDA_SY NC
SPKR
SATA0TXP
SATA1RXN
SATA1RXP
AM10
AM8
AP11
Sheet 12 of 38
27 HDA_SY NC
R142
R133
33_04
1M_04
S
Q3
D HDA_SYNC_R 3.3A_1.5A_HDA_IO
R305 *1K_04
JOPEN2
1 2
27
27
HDA_RST#
HDA_SDIN0
E34
HDA_RST#
HDA_SDIN0
SATA1TXN
SATA1TXP
SATA2RXN
AP10
AD7
SATA_RXN2 25
PCH 1/9- RTC, HDA,
AD5
fi
MTN7002ZHS3 Flash Descriptor *OPEN_10mil-1MM
SATA ODD
SATA_RXP2 25
SATA
G
3.3VS R119 *0_04 G34 SATA2RXP AH5

Security Overide SATA_TXN2 25
HDA_SDIN1 SATA2TXN AH4
Low = Disabled-(Default) SATA2TXP SATA_TXP2 25
5VS R112 0_04 C34
Layout Note: High = Enabled HDA_SDIN2 AB8
IHDA
A34 SATA3RXN AB10
Close to PCH HDA_SDIN3 SATA3RXP
R312 *10mil_short_04 AF3
28 ME_WE D15 RB751S-40C2 SATA3TXN AF1
R314 *910_04 A C HDA_SDOUT_R A36 SATA3TXP
HDA_SDO Y7
SATA
SATA4RXN Y5
LED_IGPU# C36 SATA4RXP AD3
a
HDA_DOCK_EN# / GPIO33 SATA4TXN AD1
R140 10K_04 N32 SATA4TXP
3.3V HDA_DOCK_RST# / GPIO13 Y3
SATA5RXN Y1
3.3V SATA5RXP AB3
Layout Note: PCH_JTAG_TCK_BUF J3 SATA5TXN AB1
JTAG_TCK SATA5TXP 1.05VS
PCH_JTAG_TMS H7 Y11 SATAICOMP R146 37.4_1%_04
3.3VS JTAG_TMS SATAICOMPO
JTAG
in
R291 R70 R79
*210_1%_04 *210_1%_04 *210_1%_04 PCH_JTAG_TDI K5 Y10
JTAG_TDI SATAICOMPI
PCH_JTAG_TDO H1 1.05VS
PCH_JTAG_TMS JTAG_TDO AB12 SATA3COMP R144 49.9_1%_04
C202 C207 C194 PCH_JTAG_TDI SATA3RCOMPO
PCH_JTAG_TDO AB13
SATA3COMPI
*0.01u_16V_X7R_04
*1u_6.3V_X5R_04
PCH_JTAG_TCK_BUF
*0.1u_16V_Y5V_04
SPI_SCLK R85 33_04 SPI_SCLK_R T3 AH1 RBIAS_SATA3 R316 750_1%_04

R295 R100 R89 R293 SPI_CLK SATA3RBIAS 3.3VS
*51_04 SPI_CS0# R186 0_04 SPI_CS_0# Y 14
*100_1%_04 *100_1%_04 *100_1%_04 SPI_CS0# R301 *10K_04
R187 *0_04 SPI_CS_1# T1
SPI_CS1# P3
SPI
SATA_LED#
J_HDD1
S1
S2 SATA_TXP0_R C375
SATA HDD
SATA_TXP0
SPI_SI
SPI_SO
h R80
R71
33_04 SPI_SI_R
33_04 SPI_SO_R
V4
U3
SPI_MOSI
SPI_MISO
NM70_SLJTA
SATA0GP / GPIO21
SATA1GP / GPIO19
SATALED#
V14
P1
ODD_DETECT#
BBS_BIT0 R306
SATA_LED# 25
ODD_DETECT# 17
BBS_BIT0 - BIOS BOOT STRAP BIT 0

*1K_04
.c
0.01u_16V_X7R_04
S3 SATA_TXN0_R C373 0.01u_16V_X7R_04 SATA_TXN0
S4
S5 SATA_RXN0_R C371 0.01u_16V_X7R_04 SATA_RXN0
S6 SATA_RXP0_R C370 0.01u_16V_X7R_04 SATA_RXP0
S7
Share ROM 3.3VS
3.3VS
R73 33_04 SPI_SI_R
P1 28 HSPI_MSI
R69 33_04 SPI_SO_R SPI_* = 1.5"~6.5"
P2 28 HSPI_MSO
R78 33_04 SPI_SCLK_R NC3
P3 28 HSPI_SCLK
R174 *0_04 SPI_CS_0#
P4
P5
28 HSPI_CE#
R175 0_04 SPI_CS_1# SHORT
C354 0.1u_16V_Y5V_04
ME ROM
P6
P7 U17 16Mbit
w
P8 SPI_VDD 8 5 SPI_SI
P9 VDD SI
P10 5VS 2
R340 SPI_SO
P11 HDD_NC0 C353 C349 SO
+ C345 3.3K_1%_04
*2.2u_6.3V_X5R_06
220u_6.3V_6.3*6.3*4.2
P12 SPI_WP# 3 1 SPI_CS0#

*0.1u_16V_Y5V_04
P13
MXIC 6-04-25160-A90 WP# CE#
HDD_NC1
P14 HDD_NC2 EON 6-04-02516-490 R325 6 SPI_SCLK
P15 HDD_NC3 3.3K_1%_04 SCK
ND1
2 GD 6-04-02516-A90 SPI_HOLD# 7 4
193705-1 HOLD# VSS
w
AMIC 6-04-02516-A91 MX25L1606EM2I-12G

w
PCH 1/9- RTC, HDA, SATA B - 13

Schematic Diagrams
PCH 2/9- PCIE, SMBUS, CLK
m
RN2 3.3V
2.2K_8P4R_04
PantherPoint - M (PCI-E,SMBUS,CLK) SMB_DATA
SML0_CLK
SMB_CLK
8
7
6
1
2
3
SML0_DATA 5 4
U16B RN3
10K_8P4R_04
o
BG34 PEG_PCIECLKRQ7# 8 1
BJ34 PERN1 E12 BT_SBD# BT_SBD# 7 2
AV32 PERP1 SMBALERT# / GPIO11 LPD_SPI_INTR# 6 3
AU32 PETN1 H14 SMB_CLK USB_OC#89 5 4
PETP1 SMBCLK SMB_CLK 9,10 16,25 USB_OC#89
BE34 C9 SMB_DATA SMD_CPU_THERM R99 2.2K_04
BF34 PERN2 SMBDATA SMB_DATA 9,10
SMC_CPU_THERM R91 2.2K_04
BB32 PERP2 DRAMRST_CNTRL R287 1K_04
.c
AY32 PETN2
PETP2 A12
SMBUS
DRAMRST_CNTRL
BG36 SML0ALERT# / GPIO60 DRAMRST_CNTRL 3
RN1
21 PCIE_RXN3_WLAN BJ36 PERN3 C8 SML0_CLK 10K_8P4R_04
21 PCIE_RXP3_WLAN PCIE_TXN3_C AV34 PERP3 SML0CLK PCIECLKRQ6# 8 1
C244 0.1u_10V_X7R_04
21 PCIE_TXN3_WLAN PCIE_TXP3_C AU34 PETN3 G12 SML0_DATA 7 2
C246 0.1u_10V_X7R_04
21 PCIE_TXP3_WLAN PETP3 SML0DATA PCIECLKRQ5# 6 3
BF36 PCIECLKRQ0# 5 4
24 PCIE_RXN4_LAN BE36 PERN4
24 PCIE_RXP4_LAN PCIE_TXN4_C AY34 PERP4 C13 LPD_SPI_INTR# DGPU_PRSNT#
C240 0.1u_10V_X7R_04 R335 10K_04
24 PCIE_TXN4_LAN PCIE_TXP4_C BB34 PETN4 SML1ALERT# / PCHHOT# / GPIO74

C241 0.1u_10V_X7R_04
24 PCIE_TXP4_LAN PETP4 E14 SMC_CPU_THERM PEG_CLKREQ# R83 *10K_04
SML1CLK / GPIO58 SMC_CPU_THERM 28
PCI-E*
BG37
x
BH37 PERN5 M16 SMD_CPU_THERM
Sheet 13 of 38 PCI-E x1 Usage

AY36
BB36
PERP5
PETN5
PETP5
SML1DATA / GPIO75 SMD_CPU_THERM 28
BJ38
PCH 2/9- PCIE, BG38
AU36
PERN6
PERP6 M7
Controller
Lane 1 X CL_CLK1
AV36 PETN6 CL_CLK1 CL_CLK1 21 3.3VS
fi
SMBUS, CLK Lane 2 X
BG40
PETP6
T11
Link
CL_DATA1 PCIECLKRQ1# R300 10K_04
Lane 3 WLAN BJ40 PERN7 CL_DATA1 CL_DATA1 21
PCIECLKRQ2# R128 10K_04
Lane 4 LAN / CARD READER AY40 PERP7
BB40 PETN7 P10 CL_RST#1
Lane 5 X PETP7 CL_RST1# CL_RST#1 21
Lane 6 X BE38
BC38 PERN8
Lane 7 X AW38 PERP8 RN8
AY38 PETN8 10K_8P4R_04
Lane 8 X
a
PETP8 CLK_BUF_CPYCLK_P 8 1
M10 PEG_CLKREQ# CLK_BUF_CPYCLK_N 7 2
Y40 PEG_A_CLKRQ# / GPIO47 CLK_PCIE_ICH_N 6 3
Y39 CLKOUT_PCIE0N CLK_PCIE_ICH_P 5 4
CLKOUT_PCIE0P AB37 VGA_PEXCLK#
J2 CLKOUT_PEG_A_N AB38
CLOCKS
PCIECLKRQ0# VGA_PEXCLK
PCIECLKRQ0# / GPIO73 CLKOUT_PEG_A_P
100MHz
in
AB49 AV22
AB47 CLKOUT_PCIE1N CLKOUT_DMI_N AU22 CLK_EXP_N 3
CLKOUT_PCIE1P CLKOUT_DMI_P CLK_EXP_P 3
CLK_BUF_CKSSCD_P R136 10K_04
PCIECLKRQ1# M1 CLK_BUF_CKSSCD_N R131 10K_04
PCIECLKRQ1# / GPIO18 AM12 PCH_CLK_DP_N_R R162
120MHz
*10mil_short_04 CLK_BUF_DOT96_P R134 10K_04
CLKOUT_DP_N AM13 CLK_DP_N 3
PCH_CLK_DP_P_R R170 *10mil_short_04 CLK_BUF_DOT96_N R150 10K_04
AA48 CLKOUT_DP_P CLK_DP_P 3
AA47 CLKOUT_PCIE2N
CLKOUT_PCIE2P BF18 CLK_PCIE_ICH_N CLK_BUF_REF14 R197 10K_04
PCIECLKRQ2# V10 CLKIN_DMI_N BE18 CLK_PCIE_ICH_P PEG_CLKREQ# R95 *10K_04
PCIECLKRQ2# / GPIO20 CLKIN_DMI_P LAN_CLKREQ# R86 *10K_04
100MHz CLK_PCIE_WLAN# Y37 BJ30 CLK_BUF_CPYCLK_N
21 CLK_PCIE_WLAN#
21 CLK_PCIE_WLAN
21 WLAN_CLKREQ#
24 CLK_PCIE_LAN#
24 CLK_PCIE_LAN
100MHz
CLK_PCIE_WLAN
CLK_PCIE_LAN#
CLK_PCIE_LAN
h Y36
A8
Y43
Y45
CLKOUT_PCIE3N
CLKOUT_PCIE3P
PCIECLKRQ3# / GPIO25
CLKOUT_PCIE4N
CLKOUT_PCIE4P
CLKIN_GND1_N
CLKIN_GND1_P
CLKIN_DOT_96N
CLKIN_DOT_96P
BG30
G24
E24
AK7
CLK_BUF_CPYCLK_P
CLK_BUF_DOT96_N
CLK_BUF_DOT96_P
CLK_BUF_CKSSCD_N
6-22-25R00-1BV
6-22-25R00-1B4
6-22-25R00-1B5
C367 22p_50V_NPO_04
.c
LAN_CLKREQ# L12 CLKIN_SATA_N AK5 CLK_BUF_CKSSCD_P
16,24 LAN_CLKREQ# PCIECLKRQ4# / GPIO26 CLKIN_SATA_P
V45 K45 CLK_BUF_REF14
1
V46 CLKOUT_PCIE5N REFCLK14IN
CLKOUT_PCIE5P R344 X2
PCIECLKRQ5# L14 H45 33MHz
PCIECLKRQ5# / GPIO44 CLKIN_PCILOOPBACK CLK_PCI_FB 16 FSX5L_25MHZ
1M_04
2
AB42 V47 XTAL25_IN
AB40 CLKOUT_PEG_B_N XTAL25_IN V49 XTAL25_OUT
CLKOUT_PEG_B_P XTAL25_OUT C364 22p_50V_NPO_04
PEG_B_CLKRQ# E6
w
16 PEG_B_CLKRQ# PEG_B_CLKRQ# / GPIO56

Y47 XCLK_RCOMP R352 90.9_1%_04
V40 XCLK_RCOMP 1.05VS
V42 CLKOUT_PCIE6N 90.9-£[ ¡Ó1% pullup to
CLKOUT_PCIE6P
PCIECLKRQ6# T13 +VccIO
PCIECLKRQ6# / GPIO45 (1.05V, S0 rail)close to
V38 K43 PCH_XTAL_IN PCH
V37 CLKOUT_PCIE7N CLKOUTFLEX0 / GPIO64
FLEX CLOCKS
CLKOUT_PCIE7P F47 PCH_GPIO65

w
PEG_PCIECLKRQ7# K12 CLKOUTFLEX1 / GPIO65

PCIECLKRQ7# / GPIO46 H47 PCH_GPIO66 R332 *10mil_short_04
CLK_XDP_N AK14 CLKOUTFLEX2 / GPIO66
CLK_XDP_P AK13 CLKOUT_ITPXDP_N K49 DGPU_PRSNT#
CLKOUT_ITPXDP_P CLKOUTFLEX3 / GPIO67
TI USB3.0 unused crystal
NM70_SLJTA and used PCH clock output
w
B - 14 PCH 2/9- PCIE, SMBUS, CLK

Schematic Diagrams
PCH 3/9- DMI, FDI, PWRGD
m
PantherPoint -M (DMI,FDI,GPIO)
o
U16C
3.3V
BC24 BJ14
2 DMI_RXN0 BE20 DMI0RXN FDI_RXN0 AY 14 FDI_TXN0 2
2 DMI_RXN1 BG18 DMI1RXN FDI_RXN1 BE14 FDI_TXN1 2
AC_PRESENT R111 10K_04
2 DMI_RXN2 BG20 DMI2RXN FDI_RXN2 BH13 FDI_TXN2 2
PM_SLP_LAN# R87 *10K_04
2 DMI_RXN3 DMI3RXN FDI_RXN3 BC12 FDI_TXN3 2
SWI# R278 10K_04
BE24 FDI_RXN4 BJ12 FDI_TXN4 2
.c
SUS_PWR_ACK R94 10K_04
2 DMI_RXP0 BC20 DMI0RXP FDI_RXN5 BG10 FDI_TXN5 2
2 DMI_RXP1 BJ18 DMI1RXP FDI_RXN6 BG9 FDI_TXN6 2
2 DMI_RXP2 BJ20 DMI2RXP FDI_RXN7 FDI_TXN7 2
PCIE_WAKE# R280 1K_04
2 DMI_RXP3 DMI3RXP BG14 PWR_BTN# R117 * 10K_04
AW24 FDI_RXP0 BB14 FDI_TXP0 2
PM_BATLOW# R84 8.2K_04
2 DMI_TXN0 AW20 DMI0TXN FDI_RXP1 BF14 FDI_TXP1 2
2 DMI_TXN1 BB18 DMI1TXN FDI_RXP2 BG13 FDI_TXP2 2
2 DMI_TXN2 AV18 DMI2TXN FDI_RXP3 BE12 FDI_TXP3 2
2 DMI_TXN3 DMI3TXN FDI_RXP4 FDI_TXP4 2
FDI
BG12 3.3VS
DMI
AY 24 FDI_RXP5 BJ10 FDI_TXP5 2
2 DMI_TXP0 DMI0TXP FDI_RXP6 FDI_TXP6 2
AY 20 BH9 PM_CLKRUN# R304 8.2K_04
2 DMI_TXP1 AY 18 DMI1TXP FDI_RXP7 FDI_TXP7 2
2 DMI_TXP2 AU18 DMI2TXP
2 DMI_TXP3 DMI3TXP
x
AW16
FDI_INT 2
1.05VS R346 49.9_1%_04 DMI_COMP_R BJ24

DMI_ZCOMP
FDI_INT
FDI_FSY NC0
AV12
FDI_FSY NC0 2
RTCVCC
Sheet 14 of 38
BG25 BC10
PCH 3/9- DMI, FDI,

DMI_IRCOMP FDI_FSY NC1 FDI_FSY NC1 2
R211 750_1%_04 DMI_2RBIAS BH21 AV14 DSWODVREN R285 330K_04
DMI2RBIAS FDI_LSY NC0 FDI_LSY NC0 2
fi
BB10 R289 * 330K_04
FDI_LSY NC1 FDI_LSY NC1 2
ALL_SY S_PWRGD R215 10K_04

PWRGD
A18 DSWODVREN
DSWVRMEN
System Power Management

SUS_PWR_ACK C12 E22 R130 *10mil_short RSMRST#
SUSACK# DPWROK
28 SY S_RESET#
R298 10K_04 SYS_RESET# K3 B9 PCIE_WAKE#
3.3VS SY S_RESET# WAKE# PCIE_WAKE# 21,24
a
C221 *0.1u_10V_X5R_04 SYS_PWROK P12 N3 PM_CLKRUN#
SY S_PWROK CLKRUN# / GPIO32
R201 *10mil_short PM_PCH_PWROK_R L22 G8 S4_STATE#

28 PM_PCH_PWROK PWROK SUS_STAT# / GPIO61
R200 *10mil_short PM_MPWROK L10 N14 SUSCLK
in
APWROK SUSCLK / GPIO62
B13 D10 SLP_S5#

3,29 PM_DRAM_PWRGD DRAMPWROK SLP_S5# / GPIO63
RSMRST# C21 H4
28 RSMRST# RSMRST# SLP_S4# SUSC# 28,32
R126 10K_04
R106 *10mil_short SUS_PWRACK K16 F4

28 SUS_PWR_ACK SUSWARN#/SUSPWRDNACK/GPIO30 SLP_S3# SUSB# 6,28,29
PWR_BTN# E20 G10 SLP_A#

28 PWR_BTN# PWRBTN# SLP_A#
16,28 AC_PRESENT
28 SWI#
AC_PRESENT
PM_BATLOW#
SWI#
H20
E10
A10
ACPRESENT / GPIO31
BATLOW# / GPIO72
RI#
SLP_SUS#
PMSY NCH
SLP_LAN# / GPIO29
G16
AP14
K14
h
SLP_SUS#
PM_SLP_LAN#
H_PM_SYNC 3,29
.c
NM70_SLJTA 3.3V
From EC pin119
R198 *0_04
28 VCORE_PWRGD
C253
R199 * 10mil_short
29,33 DELAY _PWRGD
*0.1u_10V_X5R_04
3.3V C227
31 0.85VS_PWRGD
*1u_6.3V_Y 5V_04 R203
U6D
14
74LVC08PW *0_04
14
w
3.3V 3.3V 12
11 R214 *10mil_short 9
13 ALL_SY S_PWRGD 11,28,29,33 8 SYS_PWROK
U6A
74LVC08PW C255 C259 10
14
28 PM_PCH_PWROK
14
4 R212 *1u_6.3V_X5R_04 U6C
7
1 29,31 1.8VS_PWRGD 6 1.05VS_VTT_EN *10mil_short 0.85VS_EN *1u_6.3V_X5R_04 74LVC08PW
32 DDR1.5V_PWRGD 3 DDR_1.05VS_PWRGD 5
2
32 1.05VS_PWRGD
U6B
7
74LVC08PW
w
0.85VS_EN 31
7
ON
w
PCH 3/9- DMI, FDI, PWRGD B - 15

Schematic Diagrams
PCH 4/9- LVDS, DDI, CRT
m
o
PantherPoint -M (LVDS,DDI)
.c
U16D
J47 AP43
11 BLON L_BKLTEN SD VO_TVCLKIN N
x
M45 AP45
11,28 NB_ENAVDD
Sheet 15 of 38 11 PCH _BRIGH TNESS
P45
L_VD D_EN
L_BKLTCTL
SDVO_TVC LKINP
SDVO_STALLN
AM42
AM40
Ver:1.0 T40 SDVO_STALLP
PCH 4/9- LVDS, 3.3VS pull up 2.2K
R202
11 P_DDC _CLK
11 P_DDC _DATA
2.2K_04 L_C TR L_C LK
K47
T45
L_D DC _C LK
L_D DC _D ATA SDVO_IN TN
SDVO_INTP
AP39
AP40
fi
L_C TR L_C LK
DDI, CRT R196
R208
2.2K_04
2.37K_1%_04
L_C TR L_D ATA
LVDS_IBG
P39
AF37
L_C TR L_D ATA
LVD_IBG SDVO_CTRLCLK
P38
AF36 M39
LVD_VBG SDVO_CTRLDATA
AE48
AE47 LVD_VREFH AT49
LVD_VREFL DDPB_AU XN AT47
DDPB_AUXP AT40 3.3VS
SDVO
Display Port B
AK39 DDPB_H PD
11 LVDS-LCLKN
a
AK40 LVDSA_CLK# AV42
LVDS
11 LVDS-LCLKP LVDSA_CLK D DPB_0N AV40
AN48 DDPB_0P AV45
11 LVDS-L0N AM47 LVDSA_DATA#0 D DPB_1N AV46
Digital Display Interface

11 LVDS-L1N AK47 LVDSA_DATA#1 DDPB_1P AU48
11 LVDS-L2N AJ48 LVDSA_DATA#2 D DPB_2N AU47 R 209 R 207
LVDSA_DATA#3 DDPB_2P AV47
D DPB_3N 2.2K_04 2.2K_04
AN47 AV49
11 LVDS-L0P LVDSA_DATA0 DDPB_3P
in
AM49
11 LVDS-L1P AK49 LVDSA_DATA1
11 LVDS-L2P AJ47 LVDSA_DATA2 P46
LVDSA_DATA3 D DPC_CTRLCLK P42 HDMI_C TRLCLK 26
D DPC_CTRLDATA HDMI_C TRLDATA 26
AF40
AF39 LVDSB_CLK# AP47
LVDSB_CLK DDPC _AU XN AP49
AH45 DDPC_AUXP AT38 HDMI_H PD
Display Port C
AH47 LVDSB_DATA#0 DDPC_H PD HDMI_HPD 26
AF49 LVDSB_DATA#1 AY 47 HDMIC _C0CN
AF45 LVDSB_DATA#2 DD PC_0N AY 49 HDMIC _C0CP HDMIC_C 0C N 26
LVDSB_DATA#3 D DPC _0P AY 43 HDMIC _C1CN HDMIC_C 0C P 26
DD PC_1N HDMIC_C 1C N 26
11
11
DAC _BLU E
DAC _GREEN
C358 *33p_50V_N PO_04
h
DAC_BLU E
DAC_GREEN R339 150_1%_04 DAC _BLUE

150_1%_04 DAC _GREEN
AH43
AH49
AF47
AF43
N48
P49
LVDSB_DATA0
LVDSB_DATA1
LVDSB_DATA2
LVDSB_DATA3
CR T_BLUE
D DPC _1P
DD PC_2N
D DPC _2P
DD PC_3N
D DPC _3P
D DPD_CTRLCLK
AY 45
BA47
BA48
BB47
BB49
M43
M36
HDMIC _C1CP
HDMIC _C2CN
HDMIC _C2CP
HDMIC _CLKCN
HDMIC _CLKCP
HDMIC_C 1C P 26
HDMIC_C 2C N 26
HDMIC_C 2C P 26
HDMIC_C LKCN 26
HDMIC_C LKCP 26
.c
C362 *33p_50V_N PO_04 R341
R342 150_1%_04 DAC _R ED T49 CR T_GREEN D DPD_CTRLDATA
D AC_RED CR T_R ED
11 DAC _RED AT45
C363 *33p_50V_N PO_04
T39 DDPD _AU XN AT43
CRT
EMI NEAR PCH 11 D AC_DD CACLK M40 CR T_D DC_CLK DDPD_AUXP BH41
Display Port D
11 D AC_DD CADATA CR T_D DC_DATA DDPD_H PD
BB43
M47 DD PD_0N BB45
11 D AC_HSY NC M49 CR T_H SY NC D DPD _0P BF 44
11 D AC_VSY NC CR T_VSY NC DD PD_1N BE44
D DPD _1P BF 42
R206 1K_1%_04 DAC _IR EF_R T43 DD PD_2N BE42
T42 DAC _IR EF D DPD _2P BJ42
w
CR T_IR TN DD PD_3N BG42

D DPD _3P
NM70_SLJTA
Connect to GND
w
w
B - 16 PCH 4/9- LVDS, DDI, CRT

Schematic Diagrams
PCH 5/9- PCI, USB, RSVD
m
PantherPoint -M (PCI,USB,NVRAM) 3.3V
R N11 10K_8P4R_04
PEG_B_C LKR Q# 5 4
13 PEG_B_CLKRQ# USB_OC#23 6 3
o
U 16E USB_OC#14 7 2
Boot BIOS Strap AY 7 USB_OC#01 8 1
RSVD1 AV7
BG26 RSVD2 AU3
BBS_BIT1 BBS_BIT0 Boot BIOS Location TP1 RSVD3
BJ26 BG4 R N12 10K_8P4R_04
BH 25 TP2 RSVD4 USB_OC#1213 5 4
BJ16 TP3 AT10 USB_OC#67 6 3
0 0 LPC BG16 TP4 RSVD5 BC8 USB_OC#1011 7 2
AH 38 TP5 RSVD6 8 1
.c
0 1 Reserved (NAND) USB_OC#45
AH 37 TP6 AU2
1 0 PCI AK43 TP7 RSVD7 AT4
AK45 TP8 RSVD8 AT3 LAN _C LKR EQ# R76 10K_04
1 1 SPI TP9 RSVD9 13,24 LAN_CLKREQ#
C 18 AT1
N 30 TP10 RSVD 10 AY 3
H3 TP11 RSVD 11 AT5
R 189 *1K_04 BBS_BIT1 AH 12 TP12 RSVD 12 AV3
AM4 TP13 RSVD 13 AV1 3.3VS
AM5 TP14 RSVD 14 BB1 R N6 10K_8P4R_04
Y 13 TP15 RSVD 15 BA3 INT_PIR QD# 4 5
K24 TP16 RSVD 16 BB5 SATA_OD D_DA# 3 6
L24 TP17 RSVD 17 BB3 INT_PIR QA# 2 7
AB46 TP18 RSVD 18 BB7 IN T_PIRQE# 1 8
x
AB45 TP19 RSVD 19 BE8
Flash Descriptor security override strap TP20 RSVD 20 BD4
RSVD
RSVD 21 BF6 R N13 10K_8P4R_04
RSVD 22 DGPU _H OLD_RST# 4 5
LOW = PCI_GNT#3 swap override
PCI_GNT#3 B21 AV5 SMI# 3 6
HIGH = Default M20
AY 16
BG46
TP21
TP22
TP23
RSVD 23
RSVD 24
AV10
AT8
17,28 SMI# D_GPU_PWR_EN# 2
1
7
8 Sheet 16 of 38
fi
TP24 RSVD 25
Understand the RED FONT define BE28

RSVD 26
RSVD 27
AY 5
BA2 INT_PIRQG#
INT_PIR QB#
4
3
R N7 10K_8P4R_04
5
6
PCH 5/9- PCI, USB,
BC 30 USB3Rn1 AT12 2 7
R184 *1K_04 PCI_GN T#3

BE32
BJ32
BC 28
USB3Rn2
USB3Rn3
USB3Rn4
RSVD 28
RSVD 29
BF3
INT_PIR QH#
DGPU _SELECT# 1 8
RSVD
BE30 USB3Rp1
BF32 USB3Rp2
BG32 USB3Rp3 C24
a
AV26 USB3Rp4 USBP0N A24 USB_PN0 23
BB26 USB3Tn1 USBP0P C25 USB_PP0 23 USB PORT1
AU 28 USB3Tn2 USBP1N B25 USB_PN1 23
R157 *1K_04 IN T_PIRQE# USB PORT2 USB1 Port For Debug.
AY 30 USB3Tn3 USBP1P C26 USB_PP1 23
AU 26 USB3Tn4 USBP2N A26
AY 26 USB3Tp1 USBP2P K28
MPC Switch Control AV28 USB3Tp2 USBP3N H28 USB_PN3 21
MPC OFF -- 0 DEFAULT AW30 USB3Tp3 USBP3P E28 USB_PP3 21 WLAN
USB3Tp4 USBP4N
in
D28
MPC ON -- 1 USBP4P C28
USBP5N A28
USBP5P C29
USBP6N B29
INT_PIR QA# K40 USBP6P N28
INT_PIR QB# K38 PIRQA# USBP7N M28
H 38 PIRQB# USBP7P L30
PCI
INT_PIR QC# CCD
17 INT_PIR QC# G38 PIRQC # USBP8N K30 USB_PN8 22
INT_PIR QD#
PIRQD # USBP8P G30 USB_PP8 22
R274 * 10mil_short_04 USB_PN9 25
DGPU _H OLD_RST# C 46 USBP9N E30 R276 * 10mil_short_04 USB9 Port For Debug.
C 44 REQ1# / GPIO50 USBP9P C30 USB_PP9 25 USB PORT3
USB
DGPU _SELECT# R277 *0_04
D_GPU_PWR_EN# E40 REQ2# / GPIO52 USBP10N A30 R281 *0_04
REQ3# / GPIO54 U SBP10P L32
25 SATA_ODD_DA#
BBS_BIT1
PCI_GNT#3
INT_PIR QE#
SATA_OD D_DA#
INT_PIR QG#
D 47
D_GPU_PWM_SELECT# E42
F46
G42
G40
C 42
h
GN T1# / GPIO51
GN T2# / GPIO53
GN T3# / GPIO55
PIRQE# / GPIO2
PIRQF# / GPIO3
PIRQG# / GPIO4
USBP11N
U SBP11P
USBP12N
U SBP12P
USBP13N
U SBP13P
USBRBIAS#
K32
G32
E32
C32
A32
C33 USB_BIAS R317 22.6_1%_06

.c
INT_PIR QH# D 44
PIRQH # / GPIO5
B33
R81 * 0_04 K10 U SBRBIAS
28 PME# PME#
PLT_RST# C6 A14 USB_OC #01
3 PLT_RST# PLTRST# OC0# / GPIO59 K20 USB_OC#01 23
USB_OC #23
OC1# / GPIO40 B17 USB_OC #45
H 49 OC2# / GPIO41 C16 USB_OC #67
H 43 CLKOUT_PCI0 OC3# / GPIO42 L16 USB_OC #89
J48 CLKOUT_PCI1 OC4# / GPIO43 A16 USB_OC#89 13,25
R194 22_04 CLK_PC I_FB_R USB_OC #1011
13 C LK_PCI_FB K42 CLKOUT_PCI2 OC5# / GPIO9 D14 USB_OC #1213
R192 22_04 CLK_PC I_KBC _R H 40 CLKOUT_PCI3 OC6# / GPIO10 C14 USB_OC #14 R102 *0_04
28 PC LK_KBC CLKOUT_PCI4 OC7# / GPIO14 AC_PRESENT 14,28
w
N M70_SLJTA
PIN PLT_RST# to Buffer
PLT_RST# R396 *10mil_short_04

BU F_PLT_RST# 21,24,28
w
R328
100K_04
w
PCH 5/9- PCI, USB, RSVD B - 17

Schematic Diagrams
PCH 6/9- GPIO, CPU
m
3.3V PantherPoint - M (GPIO,VSS_NCTF,RSVD)
o
R288 1K_04 HOST_ALERT#1
R72 1K_04 HOST_ALERT#2
3.3VS
.c
R286 *10K_04 LED_DGPU# U16F
R320 *10K_04 DGPU_PWROK
R321 1K_04 SATA_ODD_PWRGT S_GPIO T7 C40 SATA_ODD_PWRGT
MFG_MODE BMBUSY# / GPIO0 TACH4 / GPIO68 SATA_ODD_PWRGT 25
R302 10K_04
R311 10K_04 SATA_DET#4 SMI# A42 B41 PCH_GPIO57 R326 1.5K_1%_04
16,28 SMI# TACH1 / GPIO1 TACH5 / GPIO69
RN5 DGPU_HPD_INTR# H36 C41 GPIO70 R158 100K_04
TACH2 / GPIO6 TACH6 / GPIO70 3.3VS
10K_8P4R_04
1 8 KBC_RST# SCI# E38 A40 GPIO71 R318 100K_04
28 SCI# 3.3VS
2 7 DGPU_HPD_INTR# TACH3 / GPIO7 TACH7 / GPIO71

3 6 SCI# ICC_EN# C10
4 5 INT_PIRQC# GPIO8
INT_PIRQC# 16 C4
x
R125 200K_04 SATA_ODD_PRSNT# R279 10K_04 EDID_SELECT# R101 10K_04
3.3V LAN_PHY_PWR_CTRL / GPIO12 3.3VS
G2 P4 GA20 28
RN4 HOST_ALERT#1
10K_8P4R_04 GPIO15 A20GATE R181 *10K_04
1 8 AU16 1.05VS
CRIT_TEMP_REP#_R HPECI_R R168 *0_04
Sheet 17 of 38 2
3
4
7
6
5
TEST_SET_UP
S_GPIO
ODD_DETECT# 12
SATA_DET#4 U2
SATA4GP / GPIO16
PECI
RCIN#
P5 KBC_RST#
H_PECI 3,28,29
KBC_RST# 28
fi
D40 AY11 H_CPUPWRGD 3,29
GPIO
DGPU_PWROK
PCH 6/9- GPIO, TACH0 / GPIO17 PROCPWRGD
CPU/MISC
R154 *100K_1%_04
R109 *10mil_short_04 PCH_TS_VSS1 BIOS_REC T5 AY10 HTHRMTRIP#_R R172 390_1%_06
SCLOCK / GPIO22 THRMTRIP# H_THRMTRIP# 3
R155 *10mil_short_04 PCH_TS_VSS2
CPU R113
R127
*10mil_short_04
*10mil_short_04
PCH_TS_VSS3
PCH_TS_VSS4
HOST_ALERT#2
SB_BLON
E8
E16
GPIO24 INIT3_3V#
T14
AY1
INIT3_3V#
NV_CLE R330 1K_04

R323 2.2K_04 1.8VS
PLL_ODVR_EN 11 SB_BLON GPIO27 DF_TVS H_SNB_IVB# 3,29
R93 *1K_04
R90 100K_04 FDI_OVRVLTG PLL_ODVR_EN P8
GPIO28 AH8 PCH_TS_VSS1 DMI & FDI Termination Voltage
a
LED_DGPU# K1 TS_VSS1
PLL_ODVR_EN:HIGH- ENABLED[DEFAULT] STP_PCI# / GPIO34 AK11 PCH_TS_VSS2 Set to Vss when LOW
LOW - DISABLED R88 *0_04 PCH_MUTE# K4 TS_VSS2 NV_CLE
28 ICPPE# GPIO35 AH10 PCH_TS_VSS3 Set to Vcc when HIGH
R294 10K_04 LED_DGPU# SATA_ODD_PRSNT# V8 TS_VSS3
DGPU_PWROK 25 SATA_ODD_PRSNT# SATA2GP / GPIO36 AK10 PCH_TS_VSS4
R322 10K_04 PLACE R553 CLOSE TO THE BRANCHING POINT
FDI_OVRVLTG M5 TS_VSS4
SATA3GP / GPIO37 ( TO CPT and NVRAM CONNECTOR
in
MFG_MODE N2 P37
SLOAD / GPIO38 NC_1
GFX_CRB_DET M3
SDATAOUT0 / GPIO39
TEST_SET_UP V13 BG2
SDATAOUT1 / GPIO48 VSS_NCTF_15
3.3VS R104 *0_04 CRIT_TEMP_REP#_R V3 BG48
28 CRIT_TEMP_REP# SATA5GP / GPIO49 / TEMP_ALERT# VSS_NCTF_16
R75 *100K_04 TEST_DET D6 BH3
3.3V GPIO57 VSS_NCTF_17
R292 *10K_04 GFX_CRB_DET
R74 100K_04 BH47
VSS_NCTF_18
R296 INTERNAL GFX: LOW (DEFAULT) BOARD ID A4 BJ4
100K_04
EXTERNAL GFX:HIGH
h A44
A45
A46
VSS_NCTF_1
VSS_NCTF_2
VSS_NCTF_3
VSS_NCTF_19
VSS_NCTF_20
VSS_NCTF_21
BJ44
BJ45
BJ46
NCTF
VSS_NCTF_4 VSS_NCTF_22
R92 10K_04 BIOS_REC A5 BJ5
.c
A6 BJ6
R98 VSS_NCTF_6 VSS_NCTF_24
BIOS RECOVERY
B3 C2
*0_04
DISABLE----HIGH (DEFAULT) VSS_NCTF_7 VSS_NCTF_25
ENABLE-----LOW B47 C48
BD1 D1
BD49 D49
3.3V BE1 E1
w
R282 *10K_04 ICC_EN# BE49 E49

BF1 F1
R284 INTEGRATED Clock Chip Enable VSS_NCTF_13 VSS_NCTF_31
BF49 F49
1K_04
ICC_EN#: HIGH - DISABLED [DEFAULT] VSS_NCTF_14 VSS_NCTF_32
LOW - ENABLED
NM70_SLJTA
w
w
B - 18 PCH 6/9- GPIO, CPU

Schematic Diagrams
PCH 7/9- PWR
m
PantherPoint -M (POWER)
1.05VS
U16G POWER VCCA_DAC_3.3VS
3.3VS
o
1.3A AA23 U48
1mA
L20 HCB1608KF-121T25
AC23 VCCCORE[1] VCCADAC C237 C245
C242 C198 C217 C212 AD21 VCCCORE[2] C230 C232 C235 C249
CRT
VCCCORE[3]
22u_6.3V_X5R_08
*22u_6.3V_X5R_08
AD23 U47
10u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 AF21 VCCCORE[4] VSSADAC 0.1u_10V_X5R_04 *0.1u_10V_X5R_04
VCC CORE
AF23 VCCCORE[5] 0.01u_16V_X7R_04 10u_6.3V_X5R_06
AG21 VCCCORE[6]
VCCCORE[7]
.c
AG23 1mA 3.3VS_VCCA_LVD 3.3VS
AG24 VCCCORE[8] AK36 R210 *15mil_short_06
AG26 VCCCORE[9] VCCALVDS
AG27 VCCCORE[10] AK37 C226
AG29 VCCCORE[11] VSSALVDS
AJ23 VCCCORE[12] *1u_6.3V_X5R_04
AJ26 VCCCORE[13] AM37 1.8VS_VCCTX_LVD
LVDS
AJ27 VCCCORE[14] VCCTX_LVDS[1]
AJ29 VCCCORE[15] AM38
60mA
L31 HCB1608KF-121T25 1.8VS
AJ31 VCCCORE[16] VCCTX_LVDS[2]
VCCCORE[17]
1.05VS AP36 C231 C233 C372
VCCTX_LVDS[3]
1.05VS_VCCAPLL_EXP AP37 0.01u_16V_X7R_04 0.01u_16V_X7R_04 22u_6.3V_X5R_08
x
R195 *15mil_short_06 AN19 VCCTX_LVDS[4]
VCCIO[28]
1.05VS_VCCAPLL_EXP1
L18 *HCB1005KF-121T20 BJ22 3.3VS
VCCAPLLEXP
C238
AN16 VCC3_3[6]
V33
266mA
Sheet 18 of 38
HVCMOS
VCCIO[15]
fi
*10u_6.3V_X5R_06 C211
AN17
VCCIO[16]
VCC3_3[7]
V34 0.1u_10V_X5R_04 PCH 7/9- PWR
AN21
VCCIO[17]
1.05VS AN26 1.5VS_1.8VS
2.93A
2.92A VCCIO[18]
160mA
AN27 AT16
C225 C228 C214 C218 C203 VCCIO[19] VCCVRM[3]
a
AP21
10u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 *1u_6.3V_X5R_04 VCCIO[20]
AP23 AT20
42mA
VCCIO[21] VCCDMI[1] 1.05VS
AP24
DMI
C219 C229
VCCIO[22] 2mA
VCCIO
AP26 AB36 VCCCLKDMI R204 *15mil_short_06 1u_6.3V_X5R_04 10u_6.3V_X5R_08
VCCIO[23] VCCCLKDMI 1.05VS
in
AT24
VCCIO[24]
AN33
VCCIO[25]
AN34 AG16
3.3VS VCCIO[26] VCCDFTERM[1] V_NVRAM_VCCQ
266mA BH29 AG17 190mA R118 *15mil_short_06 1.8VS
VCC3_3[3] VCCDFTERM[2]
C236
1.5VS_1.8VS DFT / SPI AJ16
C193 R115 *0_04 3.3VS
0.1u_10V_X5R_04 VCCDFTERM[3] 0.1u_10V_X5R_04
160mA
1.05VS R185 *0_06

1.05VS_VCCAPLL_FDI
AP16
BG6
AP17
VCCVRM[2]
VccAFDIPLL
VCCIO[27]
h VCCDFTERM[4]
AJ17
V1
20mA
VCCME3.3V R310 *10mil_short_04 3.3VS
.c
R313 *0_04
FDI
1.05S_VCC_DMI VCCSPI 3.3V

42mA AU20
1.05VS R205 *15mil_short_06 C346
VCCDMI[2]
1u_6.3V_X5R_04
NM70_SLJTA
w
w
1.05VS 1.5VS 1.8VS 1.5VS_1.8VS
R348 *0_04
R351 *20mil_04
R349 *0_04
w
PCH 7/9- PWR B - 19

Schematic Diagrams
PCH 8/9 POWER
m
L30 1.05VS_VCCA_CLK
PantherPoint - M (POWER)
*HCB1005KF-121T20
1.05VS 1.05VS
3.3V U16J POWER 2.92A
AD49 N26
o
C180
VCCACLK VCCIO[29] C220
0.1u_10V_X5R_04 3mA P26
T16 VCCIO[30] 1u_6.3V_X5R_04
VCCDSW3_3 P28
VCCIO[31] 3.3V
C144 *0.1u_10V_X5R_04 PCH_VCCDSW V12 T27 97mA
L16 DCPSUSBY P VCCIO[32]
HCB1608KF-121T25 266mA T29
.c
VCC3_3 T38 VCCIO[33] C174 C183
3.3VS VCC3_3[5]
C224 C223 T23 0.1u_10V_X5R_04 0.1u_10V_X5R_04
BH23 VCCSUS3_3[7]
10u_6.3V_X5R_06 1u_6.3V_X5R_04 VCCAPLLDMI2 T24
AL29 VCCSUS3_3[8]
1.05VS VCCIO[14] V23
VCCSUS3_3[9]
USB
AL24 V24 1mA D14 RB751S-40C2
VCCAPLL_CPY _PCH DCPSUS[3] VCCSUS3_3[10] C A
1.05VS 3.3V
L19 *HCB1608KF-121T25 P24

C206 *0.1u_16V_Y5V_04 DCPSUS VCCSUS3_3[6] R303 10_1%_04
AA19 5V
VCCASW[1] T26 C171
1.01A 1.05VS
x
AA21 VCCIO[34]
1.05VS VCCASW[2] 0.1u_10V_X5R_04
C192 C210 AA24 M26 5VA_PCH_VCC5REFSUS
VCCASW[3] V5REF_SUS
Clock and Miscellaneous

*22u_6.3V_X5R_08 1u_6.3V_X5R_04 AA26
Sheet 19 of 38 AA27
VCCASW[4]
VCCASW[5]
DCPSUS[4]
AN23
AN24
VCCA_USBSUS C208 *1u_6.3V_X5R_04
3.3V
fi
AA29 VCCSUS3_3[1]
PCH 8/9 POWER C205 C175 AA31

VCCASW[6]
VCCASW[7]
1mA
5VS_PCH_VCC5REFSUS
D2 RB751S-40C2
*22u_6.3V_X5R_08 1u_6.3V_X5R_04 AC26 P34 C A
VCCASW[8] V5REF 3.3VS
AC27 R107 10_1%_04
VCCASW[9] N20
97mA 5VS
AC29 VCCSUS3_3[2]
PCI/GPIO/LPC
C191
VCCASW[10] N22
C197 AC31 VCCSUS3_3[3] 1u_6.3V_X5R_04
a
VCCASW[11] P20
1u_6.3V_X5R_04 AD29 VCCSUS3_3[4]
VCCASW[12] P22
AD31 VCCSUS3_3[5] 3.3V
VCCASW[13] C150
W21 AA16
266mA
VCCASW[14] VCC3_3[1] 3.3VS
1u_6.3V_X5R_04
W23 W16 C200 C158 C169
VCCASW[15] VCC3_3[8]
in
W24 T34 0.1u_10V_X5R_04 *0.1u_10V_X5R_04 0.1u_10V_X5R_04
VCCASW[16] VCC3_3[4]
W26
VCCASW[17]
W29
C149 0.1u_10V_X5R_04 VCCASW[18]
W31 AJ2
VCCASW[19] VCC3_3[2] 1.05S_SATA3 L13
1.05VS 1.05VS_VCCA_A_DPL W33 HCB1005KF-121T20
1.5VS_1.8VS VCCASW[20] AF13
2.92A
L21 1.05VS
HCB1608KF-121T25 VCCIO[5]
. VCCRTCEXT N16
DCPRTC AH13
C179
VCCIO[12]
C258
22u_6.3V_X5R_08
C254
h
1u_6.3V_X5R_04
1.05VS_VCCA_B_DPL
16mA
80mA
Y49
BD47
VCCVRM[4]
VCCADPLLA
VCCIO[13]
VCCIO[6]
AH14
AF14
AK1
1u_6.3V_X5R_04
L29
*HCB1005KF-121T20
SATA
80mA 1.05VS_VCCAPLL_SATA3
VCCAPLLSATA 1.05VS
. BF47
VCCADPLLB 1.5VS_1.8VS
L22 150mA
.c
HCB1608KF-121T25 AF11
1.05VS AF17 VCCVRM[1] 1.05VS
C251 C250 C256 C247
C181 C185 AF33 VCCIO[7]
VCCDIFFCLKN[1]
*22u_6.3V_X5R_08
22u_6.3V_X5R_08
*22u_6.3V_X5R_08
1u_6.3V_X5R_04
AF34 AC16 3.3V 1.5V 3.3A_1.5A_HDA_IO

1u_6.3V_X5R_04 1u_6.3V_X5R_04 AG34 VCCDIFFCLKN[2] VCCIO[2]
VCCDIFFCLKN[3] AC17
VCCIO[3] C186 R309 *0_06
AG33 AD17 R307 *15mil_short_06
1.05VS VCCSSC VCCIO[4] 1u_6.3V_X5R_04
C215
VCCSST V16
C148 0.1u_10V_X5R_04 DCPSST
1u_6.3V_X5R_04 1.01A
1.05M_VCCSUS T17 T21
w
V19 DCPSUS[1] VCCASW[22] 1.05VS

C178 *1u_6.3V_X5R_04
DCPSUS[2]
MISC
V21
<1mA VCCASW[23]
1.05VS BJ8
CPU
C209 C216 C222 V_PROC_IO T19
VCCASW[21]
4.7u_6.3V_X5R_06 *0.1u_10V_X5R_04 0.1u_10V_X5R_04 3.3A_1.5A_HDA_IO
A22 P32
16mA
2mA VCCRTC
RTC
VCCSUSHDA
w
HDA
RTCVCC
C342 C343 C344 NM70_SLJTA C182
1u_6.3V_X5R_04 *0.1u_10V_X5R_04 0.1u_10V_X5R_04 0.1u_10V_X5R_04

w
B - 20 PCH 8/9 POWER

Schematic Diagrams
PCH 9/9- GND

PantherPoint -M (GND) Voltage Rail Voltage S0 Iccmax Current (A)
m
U16I V_CPU_IO 1.05 1 (mA)
U16H
AY 4 H46 H5 V5REF 5 1 (mA)
AY42 VSS[159] VSS[259] K18 VSS[0]
AY46 VSS[160] VSS[260] K26 AA17 AK38 V5REF_Sus 5 1 (mA)
AY 8 VSS[161] VSS[261] K39 AA2 VSS[1] VSS[80] AK4
B11 VSS[162] VSS[262] K46 AA3 VSS[2] VSS[81] AK42
Vcc3_3 3.3 0.266
B15 VSS[163] VSS[263] K7 AA33 VSS[3] VSS[82] AK46 VccADAC3 1.05 1 (mA)
o
B19 VSS[164] VSS[264] L18 AA34 VSS[4] VSS[83] AK8
B23 VSS[165] VSS[265] L2 AB11 VSS[5] VSS[84] AL16 VccADPLLA 1.05 0.08
B27 VSS[166] VSS[266] L20 AB14 VSS[6] VSS[85] AL17 VccADPLLB 1.05 0.08
B31 VSS[167] VSS[267] L26 AB39 VSS[7] VSS[86] AL19
B35 VSS[168] VSS[268] L28 AB4 VSS[8] VSS[87] AL2 VccCore 1.05 1.3
B39 VSS[169] VSS[269] L36 AB43 VSS[9] VSS[88] AL21
VSS[170] VSS[270] VSS[10] VSS[89] VccDMI 1.1 0.042
B7 L48 AB5 AL23
F45 VSS[171] VSS[271] M12 AB7 VSS[11] VSS[90] AL26 VccIO 1.05 2.925
.c
BB12 VSS[172] VSS[272] P16 AC19 VSS[12] VSS[91] AL27
BB16 VSS[173] VSS[273] M18 AC2 VSS[13] VSS[92] AL31 VccASW 1.05 1.01
BB20 VSS[174] VSS[274] M22 AC21 VSS[14] VSS[93] AL33 VccSPI 3.3 0.020
BB22 VSS[175] VSS[275] M24 AC24 VSS[15] VSS[94] AL34
BB24 VSS[176] VSS[276] M30 AC33 VSS[16] VSS[95] AL48 VccDSW3_3 3.3 2 (mA)
BB28 VSS[177] VSS[277] M32 AC34 VSS[17] VSS[96] AM11
VSS[178] VSS[278] VSS[18] VSS[97] VccDFTERM 1.8 0.19
BB30 M34 AC48 AM14
BB38 VSS[179] VSS[279] M38 AD10 VSS[19] VSS[98] AM36 VccSus3_3 3.3 0.097
BB4 VSS[180] VSS[280] M4 AD11 VSS[20] VSS[99] AM39
BB46 VSS[181] VSS[281] M42 AD12 VSS[21] VSS[100] AM43 VccSusHDA 3.3 1 (mA)
BC14 VSS[182] VSS[282] M46 AD13 VSS[22] VSS[101] AM45 VccVRM 1.5 0.16
BC18 VSS[183] VSS[283] M8 AD19 VSS[23] VSS[102] AM46
VSS[184] VSS[284] VSS[24] VSS[103] VccClKDMI 1.05 0.02
x
BC2 N18 AD24 AM7
BC22 VSS[185] VSS[285] P30 AD26 VSS[25] VSS[104] AN2
VSS[186] VSS[286] VSS[26] VSS[105] VccSSC 1.05 0.095
BC26 N47 AD27 AN29
BC32 VSS[187] VSS[287] P11 AD33 VSS[27] VSS[106] AN3 VccDIFFCLKN 1.05 0.055
BC34 VSS[188] VSS[288] P18 AD34 VSS[28] VSS[107] AN31
BC36
BC40
BC42
VSS[189]
VSS[190]
VSS[191]
VSS[289]
VSS[290]
VSS[291]
T33
P40
P43
AD36
AD37
AD38
VSS[29]
VSS[30]
VSS[31]
VSS[108]
VSS[109]
VSS[110]
AP12
AP19
AP28
VccALVDS
VccTX_LVDS
3.3
1.8
1 (mA)
0.06 Sheet 20 of 38
fi
VSS[192] VSS[292] VSS[32] VSS[111]
BC48
BD46
BD5
VSS[193]
VSS[194]
VSS[195]
VSS[293]
VSS[294]
VSS[295]
P47
P7
R2
AD39
AD4
AD40
VSS[33]
VSS[34]
VSS[35]
VSS[112]
VSS[113]
VSS[114]
AP30
AP32
AP38
PCH 9/9- GND
BE22 R48 AD42 AP4
BE26 VSS[196] VSS[296] T12 AD43 VSS[36] VSS[115] AP42
BE40 VSS[197] VSS[297] T31 AD45 VSS[37] VSS[116] AP46
BF10 VSS[198] VSS[298] T37 AD46 VSS[38] VSS[117] AP8
BF12 VSS[199] VSS[299] T4 AD8 VSS[39] VSS[118] AR2
BF16 VSS[200] VSS[300] W34 AE2 VSS[40] VSS[119] AR48
BF20 VSS[201] VSS[301] T46 AE3 VSS[41] VSS[120] AT11
a
BF22 VSS[202] VSS[302] T47 AF10 VSS[42] VSS[121] AT13
BF24 VSS[203] VSS[303] T8 AF12 VSS[43] VSS[122] AT18
BF26 VSS[204] VSS[304] V11 AD14 VSS[44] VSS[123] AT22
BF28 VSS[205] VSS[305] V17 AD16 VSS[45] VSS[124] AT26
BD3 VSS[206] VSS[306] V26 AF16 VSS[46] VSS[125] AT28
BF30 VSS[207] VSS[307] V27 AF19 VSS[47] VSS[126] AT30
VSS[209] VSS[309] VSS[49] VSS[128]
in
BF40 V31 AF26 AT34
BG17 VSS[211] VSS[311] V39 AF29 VSS[51] VSS[130] AT42
BG44 VSS[214] VSS[314] W17 AF4 VSS[54] VSS[133] AU24
BG8 VSS[215] VSS[315] W19 AF42 VSS[55] VSS[134] AU30
BH11 VSS[216] VSS[316] W2 AF46 VSS[56] VSS[135] AV16
BH19 VSS[219] VSS[319] Y 12 AF8 VSS[59] VSS[138] AV30
H10 VSS[220] VSS[320] Y 38 AG19 VSS[60] VSS[139] AV38
BH27 VSS[221] VSS[321] Y4 AG2 VSS[61] VSS[140] AV4
BH31
BH33
BH35
BH39
BH43
BH7
D3
D12
VSS[222]
VSS[223]
VSS[224]
VSS[225]
VSS[226]
VSS[227]
VSS[228]
VSS[229]
VSS[322]
VSS[323]
VSS[324]
VSS[325]
VSS[328]
VSS[329]
VSS[330]
VSS[331]
Y 42
Y 46
Y8
BG29
N24
AJ3
AD47
B43
h AG31
AG48
AH11
AH3
AH36
AH39
AH40
AH42
VSS[62]
VSS[63]
VSS[64]
VSS[65]
VSS[66]
VSS[67]
VSS[68]
VSS[69]
VSS[141]
VSS[142]
VSS[143]
VSS[144]
VSS[145]
VSS[146]
VSS[147]
VSS[148]
AV43
AV8
AW14
AW18
AW2
AW22
AW26
AW28
.c
D16 VSS[230] VSS[333] BE10 AH46 VSS[70] VSS[149] AW32
D18 VSS[231] VSS[334] BG41 AH7 VSS[71] VSS[150] AW34
D22 VSS[232] VSS[335] G14 AJ19 VSS[72] VSS[151] AW36
D24 VSS[233] VSS[337] H16 AJ21 VSS[73] VSS[152] AW40
D26 VSS[234] VSS[338] T36 AJ24 VSS[74] VSS[153] AW48
D30 VSS[235] VSS[340] BG22 AJ33 VSS[75] VSS[154] AV11
D32 VSS[236] VSS[342] BG24 AJ34 VSS[76] VSS[155] AY12
D34 VSS[237] VSS[343] C22 AK12 VSS[77] VSS[156] AY22
D38 VSS[238] VSS[344] AP13 AK3 VSS[78] VSS[157] AY28
D42 VSS[239] VSS[345] M14 VSS[79] VSS[158]
D8 VSS[240] VSS[346] AP3 NM70_SLJTA
E18 VSS[241] VSS[347] AP1
w
E26 VSS[242] VSS[348] BE16

G18 VSS[243] VSS[349] BC16
G20 VSS[244] VSS[350] BG28
G26 VSS[245] VSS[351] BJ28
G28 VSS[246] VSS[352]
G36 VSS[247]
G48 VSS[248]
H12 VSS[249]
H18 VSS[250]
VSS[251]
w
H22
H24 VSS[252]
H26 VSS[253]
H30 VSS[254]
H32 VSS[255]
H34 VSS[256]
F3 VSS[257]
VSS[258]
w
NM70_SLJTA
PCH 9/9- GND B - 21

Schematic Diagrams
Mini-PCIE (WLAN)
WLAN MINI CARD
m
3.3V_WLAN
C19
o
J_MINI1 0.1u_16V_Y 5V_04
14,24 PCIE_WAKE#
R9 *0_04 WAKE# 1 2 20 mil
3 WAKE# 3.3VAUX_0 6
5 COEX1 1.5V_0 8 20 mil
COEX2 UIM_PWR 10 VDD3
R10 10K_04
3.3V 7 UIM_DATA 12 80CLK
13 WLAN_CLKREQ# 11 CLKREQ# UIM_CLK 14 80_DET# 80CLK 28
.c
R26 *10mil_short_04
13 CLK_PCIE_WLAN# 13 REFCLK- UIM_RESET 16 3IN1
13 CLK_PCIE_WLAN 9 REFCLK+ UIM_VPP 3IN1 28
15 GND0 4
GND1 GND5
J_80DBG1
KEY 1 80CLK
21 18 2 3IN1 R372
*20K_04
27 GND2 GND6 26 3
29 GND3 GND7 34 4 VDD3
GND4 GND8 40
x
*85205-04001
35 GND9 50
28 WLAN_DET# 23 GND11 GND10 R23 10K_04
13 PCIE_RXN3_WLAN 25 PETn0 20 3.3V_WLAN
13 PCIE_RXP3_WLAN PETp0 W_DISABLE#
Sheet 21 of 38 13 PCIE_TXN3_WLAN
13 PCIE_TXP3_WLAN
31
33 PERn0
PERp0
PERSET#
SMB_CLK
22
30
32
BUF_PLT_RST# 16,24,28
3.3V
fi
SMB_DATA BT_DET# 28
Mini- PCIE (WLAN) 17
19
37
Reserv ed0
Reserv ed1
USB_D-
USB_D+
36
38
20 mil
USB_PN3 16
USB_PP3 16
39 GND12 24 R24
3.3V_WLAN 41 3.3VAUX_3 3.3VAUX_1 28 3.3V_WLAN
43 3.3VAUX_4 1.5V_1 48 47K_04
R11 *0_04 CL_CLK1_R 45 GND13 1.5V_2 52 40 mil
13 CL_CLK1 47 Reserv ed2 3.3VAUX_2 42 3.3V_WLAN
R12 *0_04 CL_DATA1_R
13 CL_DATA1 49 Reserv ed3 LED_WWAN# 44
a
R13 *0_04 CL_RST#1_R WLAN_LED# R25 *10K_04 BT_DET#
13 CL_RST#1 51 Reserv ed4 LED_WLAN# 46 3.3V_WLAN
Reserv ed5 LED_WPAN# C24
R14 10K_04 PCH_BT_EN_# MPCET-S5201-TP67 H=6.7mm
3.3V_WLAN
*180p_50V_NPO_04
in
WLAN POWER
h WLAN Power" PJ2 Short " for windows 7 and Windows 8 Intel Smart Connect.
.c
¤W¥ó U7 " for windows 8 Shark Bay Support WoWLAN function & Rapid Start Technology
(§Ö³t¶}¾÷), ¥Ñ©óWin8 OS¨äWake up on WLANªº-n¨D¡A±N¥u·|¤ä´©S3 and S4¡A¨Ã¤£·|¤ä´©S5¡C
PJ2
2 1
3.3V
w
OPEN_2A
VDD3 3.3V_WLAN
U3
>120 mil 5 1
>120 mil
VIN VOUT
4
C16 VIN/SS C25
w
3 2
*1u_6.3V_X5R_04 EN GND *0.1u_16V_Y 5V_04
*NCT3522U
M: NCT3522U -- 6-02-03522-9C0
S: G5243A ---- 6-02-05243-9C0
AP2821KTR-G1 6-02-02821-9C0
28 WLAN_CON_POWER
w
B - 22 Mini-PCIE (WLAN)
Schematic Diagrams
CCD, FAN, CLICK, P/W
m
CPU FAN CONTROL
o
U12
FOR POWER SW BOARD 5VS
FON# 1
2
3
FON
VIN
GND
GND
8
7
6
5VS_FAN 4 VOUT GND 5
C337
VSET GND
1u_6.3V_X5R_04 NCT3940S-A
CPU_FAN 28
.c
6-24-30003-008 AX995B(SOT23-6) & APE8872 6-02-03940-B20
6-02-00995-B20 C335
D1 AVLC18S02015 Co-Layout 6-02-99011-B20
3.3VS 1 2 0.1u_16V_Y5V_04
5VS_FAN 5VS U11
R43 *1K_04 FON# 4
J_SW1
20mil 3
1
FON#
VIN 2
5VS_FAN CPU_FAN
J_FAN1
1 R40 *10mil_short_04 M_BTN# 6 VOUT GND 5
2 M_BTN# 29,35 28 CPU_FAN VSET GND 1
3 *AX995B C332 2
4 R272 3
2nd Source 10u_6.3V_X5R_08 50273-0037N-001
85201-04051 *0_04 PN:APE8874
x
J_FAN1
28 CPU_FANSEN
3
¹w¯dcost down solution R273 4.7K_04
3.3VS
1
Sheet 22 of 38
fi
CCD, FAN, CLICK,
P/W
a
CCD + Internal MIC
in
5V 5V_CCD
U2
1A 4 1 1A
5 VIN VOUT
CLICK CONN 5VS_TP C1

3
VIN
2
C5 C3
28 CCD_EN EN GND
R355 *15mil_short_06 *1u_6.3V_X5R_04 *0.1u_16V_Y5V_04 2.2u_6.3V_X5R_06
5VS
G5243A
C378 C376 Closs to J_CCD1
J_TP1
1
2
3
4
5
TPBUTTON_L
TPBUTTON_R
R345
10K_04
C366
R350
10K_04
C369
*10u_6.3V_X5R_06
TP_CLK 28
TP_DATA 28
1u_6.3V_X5R_04
h From EC default HI
Port8 16
16
USB_PN8
USB_PP8
C4
*10mil_short_04 INT_MIC_OUT_R
*0.01u_16V_X7R_04
J_CCD1
1
2
3
4
5
.c
R259
6 27 INT_MIC_OUT 6
47p_50V_NPO_04 47p_50V_NPO_04
50578-0060N-001 50273-0060N-001
*100p_50V_NPO_04 C2
R258 *10mil_short_04 AUDGR

CSW1~4 27 AUDG_R
LIFT 2 4 RIGHT
SW1 SW2
KEY TJG-532-V-T/R 1 3 TJG-532-V-T/R KEY
1 2 1 2
Closs to J_INTMIC1
3 4 TPBUTTON_L 3 4 TPBUTTON_R
w
5
6
5
6
C442 C443
6-53-3050B-042 *0.1u_16V_Y 5V_04 6-53-3050B-042 *0.1u_16V_Y5V_04
w
w
CCD, FAN, CLICK, P/W B - 23

Schematic Diagrams
USB, LID SWITCH
m
USB 2.0 3ÁûCO-LAY 3ÁûCO-LAY PORT 1 USBVCC1
C365 22u_6.3V_X5R_08 C271 22u_6.3V_X5R_08

U19 100 MIL
C361 22u_6.3V_X5R_08 C273 22u_6.3V_X5R_08 USB_OC#01 R354 *0_04 5 6
FLG# VOUT1
o
2 7
+
USBVCC1 C368 *220u_6.3V_6.3*6.3*4.2 USBVCC2 C409 *220u_6.3V_6.3*6.3*4.2 5V C377 C374
VIN1 VOUT2
3 8 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
VIN2 VOUT3
PORT 1 PORT 2 4 1
25,29,32 DD_ON# EN# GND
SY6288DCAC
J_USB1 J_USB2 C261 2A/90mohm
1 1 10u_6.3V_X5R_08
.c
V+ V+
USB_PN0- 2 USB_PN1- 2
DATA_L DATA_L
2
USB_PP0+ 3 USB_PP1+ 3
DATA_H DATA_H PJ12
GND3
GND4
GND2
GND3
GND1
GND2
GND1
GND4
4 4
Diff. trace 90ohm GND Diff. trace 90ohm GND *OPEN-3mm
1
USBVCC2
USB-04AP0B USB-04AP0B
PORT 2
GND2
GND1
GND4
GND1
GND3
GND4
GND2
GND3
U20 100 MIL

R357 *0_04 5 6
16 USB_OC#01 FLG# VOUT1
x
2 7 C396 C390
5V VIN1 VOUT2
3 8 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
VIN2 VOUT3
4 1
25,29,32 DD_ON# EN# GND
Sheet 23 of 38 16
16
USB_PN0
USB_PP0
4 L17
1 2
3 USB_PN0-
USB_PP0+
16
16
USB_PN1
USB_PP1
4 L25
1 2
3 USB_PN1-
USB_PP1+ C274
SY6288DCAC
2A/90mohm
fi
*WCM2012F2S-SHORT *WCM2012F2S-SHORT *10u_6.3V_X5R_08
USB, LID SWITCH
a
in
LID SWITCH IC M2
M-MARK
M8 M1 M3 M5 M6 M7 M9
M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK M-MARK
H9 H18 H17
2 9 2 9 2 9
3 8 3 8 3 8
4 1 7 4 1 7 4 1 7
5 6 5 6 5 6
3.3V
MTH10_0B8_0D2_8 MTH8_0D2_8 MTH8_0D2_8
D8 H3 GND H5 GND H2 GND H14 GND

2 9 2 9 2 9 2 9
h
C
*BAV99 RECTIFIER 3 8 3 8 3 8 3 8
3.3V 4 1 7 4 1 7 4 1 7 4 1 7
5 6 5 6 5 6 5 6
R229 100K_04 AC
MTH6_0D2_2 MTH6_0D2_2 MTH8_0D2_8 MTH10_0B8_0D2_8
U1
1 2 LID_SW# GND H19 GND H4 GND H15 GND H7 GND
VCC OUT LID_SW# 11,28 2 9 2 9 2 9 2 9
GND
A
3 8 3 8 3 8 3 8
.c
C283 C281 4 1 7 4 1 7 4 1 7 4 1 7
*1u_10V_Y5V_06 H11 H8 H12 H10 H13 5 6 5 6 5 6 5 6
3
C282 MH248-ALFA-ESO *100p_50V_NPO_04 H6_0B4_7D3_7 H6_0B4_7D3_7 H4_7B6_0D3_7 H4_7B6_0D3_7 H4_7B6_0D3_7

0.1u_16V_Y5V_04 MTH8_0D2_8 MTH8_0D2_8 MTH8_0D2_8 MTH10_0B8_0D2_8
GND GND GND GND GND
3
6-02-00248-LC2
1 2 6-02-00268-LC1
w
WLAN
H1 H16 H20 H6
OB5_8X5_3D2_8X2_3 ob5_8x5_3d2_8x2_3 H6_0B4_7D3_7 H2_2B5_4D2_2
w
w
B - 24 USB, LID SWITCH

Schematic Diagrams
LAN RTL8402, Card Reader
m
RTL8402 VDD10 VDD33/18
LED1/SPISCK
LAN_SPICS#
LANXTAL2
LANXTAL1
SD_CD#
REXT_C
MS_D0
o
LANXTAL2
R365 1M_04 LANXTAL1
48
47
46
45
44
43
42
41
39
38
37
40
X3 U21
2 1
XD_CD#
SD_CD#/MS_D5/xD_ALE
DVDD10
CKXTAL2
CKXTAL1
MS_D0/xD_D1
MS_D4/xD_D0
VDD33/18
GPO
LED0/SPICSB
LED1/SPISCK
RSET
FSX5L_25MHZ 49
GND
.c
C398 C406
22p_50V_NPO_04 22p_50V_NPO_04 1 36 SDA/SPIDI D12 RB751S-40C2

LAN_VDD33 2 AVDD33 SDA/SPIDI 35 C A
26 LAN_MDIP0 3 MDIP0 SCL/LED_CR 34 PCIE_WAKE# 14,21
26 LAN_MDIN0 4 MDIN0 DVDD10 33 VDD10
LAN_PCIE_WAKE#
26 LAN_MDIP1 5 MDIP1 LANWAKEB 32 ISOLATE# LAN_PCIE_WAKE# 28
26 LAN_MDIN1 6 MDIN1 ISOLATEB 31
6-22-25R00-1B4 LAN_VDD33 DVDD33 DVDD33 LAN_VDD33
7 30
6-22-25R00-1B5 CARD_3V3 8 Card_3V3 RTL8402 PERSTB 29 BUF_PLT_RST# 16,21,28
MS_INS# 9 SD_D7/xD_RDY CLKREQB 28 SD_WP/MS_D1 LAN_CLKREQ# 13,16
SD_D6/MS_INS#/xD_RE# SD_WP/MS_D1/xD_WP#
SD_CMD/MS_D6/xD_D3
10 27
MS_BS
SD_CLK/MS_D3/xD_D4
SD_D5/xD_CE# MS_BS/xD_CLE
SD_D0/MS_D7/xD_D5
SD_D3/MS_D2/xD_D2
11 26
12 SD_D4/xD_WE# VDD33/18 25 VDD33/18
SD_D1/MS_CLK_R
SD_D1/MS_CLK/xD_D6 GND
x
SD_D2/xD_D7
REFCLK_N
REFCLK_P
EVDD10
HSON
HSOP
Sheet 24 of 38
HSIN
HSIP
fi
LAN_VDD33 Rising Time¡G
13
14
15
16
17
18
20
21
22
23
24
19
1ms ~ 100ms LAN RTL8402,
SD_CLK/MS_D3_R
SD_D3/MS_D2_R
PCIE_RXN_4_GLAN
VDD3 R217 *28mil_06 LAN_VDD33
PCIE_RXP_4_GLAN
C416
C413
0.1u_10V_X7R_04
0.1u_10V_X7R_04
PCIE_RXN4_LAN 13
Card Reader
SD_CMD_R
PCIE_RXP4_LAN 13
SD_D0_R
SD_D2_R
VDD10 R224 *0_04
EVDD10 CLK_PCIE_LAN# 13
CLK_PCIE_LAN 13
PCIE_TXN4_LAN 13
R749 must be removed for RTL8402 application. PCIE_TXP4_LAN 13
a
EVDD10
LAN_VDD33 R380 *1.5K_04 SDA/SPIDI
R379 10K_04 LAN_PCIE_WAKE#

Close to RTL8402 for SDXC EMI
R376 *10K_04 LED1/SPISCK
R382 1K_04 ISOLATE# SD_CMD R222 *10mil_04 SD_CMD_R

3.3VS
in
R383 15K_04 SD_D0 R220 *10mil_04 SD_D0_R
R223 2.49K_1%_04 REXT_C SD_D1/MS_CLK R218 *10mil_04 SD_D1/MS_CLK_R
R374 *1K_04 LAN_SPICS# SD_D2 R226 *10mil_04 SD_D2_R
SD_D3/MS_D2 R225 *10mil_04 SD_D3/MS_D2_R
SD_CLK/MS_D3 R221 *10mil_04 SD_CLK/MS_D3_R
C275 C269 C267 C277 C276 C270
*5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04 *5p_50V_NPO_04

VDD10 VDD10 VDD10 EVDD10 EVDD10
C421
0.1u_16V_Y5V_04
Pin 34
C391
0.1u_16V_Y 5V_04
Pin 47
C388
0.1u_16V_Y5V_04
Pin 47
C401
1u_6.3V_X5R_04
Pin 18
C405
0.1u_16V_Y5V_04
Pin 18
h
4 IN 1 SOCKET SD/MMC/MS/MS Pro
VCC_CARD
SD_CD#
SD_D2
SD_D3/MS_D2
SD_CMD
P1
P2
P3
P4
P5
J_CARD-REV1
CD_SD
DAT2_SD
CD/DAT3_SD
CMD_SD
.c
P6 VSS_SD
VCC_CARD SD_CLK/MS_D3 P7 VDD_SD
LAN_VDD33 LAN_VDD33 LAN_VDD33 CARD_3V3 C263 P8 CLK_SD
SD_D0 P9 VSS_SD
C262 C264 0.1u_16V_Y5V_04 SD_D1/MS_CLK P10 DAT0_SD
SD_WP/MS_D1 P11 DAT1_SD
C387 C384 C420 C383 *4.7u_6.3V_X5R_06 0.1u_16V_Y5V_04 P12 WP_SD
P13 VSS_MS
VCC_CARD SD_D1/MS_CLK P14 VCC_MS
0.1u_16V_Y5V_04 0.1u_16V_Y 5V_04 0.1u_16V_Y5V_04 1u_6.3V_X5R_04
C265 SD_CLK/MS_D3 P15 SCLK_MS
Pin 1 Pin 6 Pin 31 Pin 7 MS_INS# P16 DAT3_MS
0.1u_16V_Y5V_04 SD_D3/MS_D2 P17 INS_MS
MS_D0 P18 DAT2_MS
SD_WP/MS_D1 P19 SDIO/DAT0_MS
w
MS_BS P20 DAT1_MS P22

SD UHS Mode Power Supply Close to Cardreader CONN P21 BS_MS
VSS_MS
GND
GND
P23
3IN1
VDD33/18 VDD33/18 VDD33/18 VDD33/18
R216 *28mil_06 VCC_CARD
CARD_3V3
C279 C418 C278 C411

w
*4.7u_6.3V_X5R_06 0.1u_16V_Y 5V_04 *4.7u_6.3V_X5R_06 0.1u_16V_Y5V_04

Pin 26 Pin 26 Pin 40 Pin 40
w
LAN RTL8402, Card Reader B - 25

Schematic Diagrams
SATA ODD, LED
m
BAT LED POWER ON LED
o
28 LED_BAT_CHG LED_ACIN 28
28 LED_BAT_FULL LED_PWR 28
SATA ODD
1
2
3
4
.c
RN9
220_8P4R_04
8
7
6
5
Zero Power ODD
3
¹q®e½Ð¾aªñJ_ODD1 5VS_ODD 5VS D5 D4
SG
J_ODD1 2
SG
Y
Y
13 RY-SP155HYYG4-1 RY-SP155HYYG4-1
12 C331 0.01u_16V_X7R_04 PJ20 *OPEN-3mm
SATA_TXP2 12
4
11 C330 0.01u_16V_X7R_04 1 2
10 SATA_TXN2 12
6-52-55002-04B 6-52-55002-04B
x
9 C329 0.01u_16V_X7R_04 6-52-55001-040 6-52-55001-040
8 SATA_RXN2 12
C328 0.01u_16V_X7R_04 SATA_RXP2 12 C320 6-52-55002-042 6-52-55002-042
7 U10
¹s¥ó¸m©ó°T¸¹¤À¤ä³B 1 4 *1u_6.3V_X5R_04
VOUT VIN 5
Sheet 25 of 38 6
5 R271 *10mil_short_04
SATA_ODD_PRSNT# 17 2
VIN
fi
4 SATA_ODD_DA# 16 GND EN SATA_ODD_PWRGT 17 3.3VS
SATA ODD, LED GND2

GND1
3
2
1 C322 C324 C326 C321 + C318
*G5243A
R270
*100K_04
50861-0137P-001 *0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 1u_6.3V_X5R_04 10u_6.3V_X5R_06 *220u_6.3V_6.3*4.2
R228 R227
PIN G ND1~4=GND
HDD LED
220_04 220_04
AIRPLANE
A
D7 D6
RY-SP190Y G34-5M RY-SP190Y G34-5M
C
in
SATA_LED# AIRPLANE#
12 SATA_LED# AIRPLANE# 28
USBVCC03 5V
FOR AUDIO BOARD h 100 MIL
C360
*0.1u_16V_Y5V_04
C359
22u_6.3V_X5R_08
100 MIL
C429
*0.1u_16V_Y5V_04
C355
*0.1u_16V_Y5V_04
USBVCC03
1.1A 60mils
C239 *0.01u_16V_X7R_04
.c
J_AUDIO1
1
MIC1-R 2
27 MIC1-R 3
MIC1-L
27 MIC1-L 4
HEADPHONE-R 5
27 HEADPHONE-R 6
HEADPHONE-L
USBVCC03 27 HEADPHONE-L 7
27 JD_SENSE 8
U18 2A
5 6 27 JD_SENSE_B USB_PN9 9
R343 *0_04 16 USB_PN9
13,16 USB_OC#89 FLG# VOUT1 USB_PP9 10
2A 2 7 16 USB_PP9 11
5V C243 C234
VIN1 VOUT2 L32 *28mil_06 12
3 8 27 SPKOUTR+_R 13
w
C356 *0.1u_16V_Y 5V_04 22u_6.3V_X5R_08 27 SPKOUTR-_R L33 *28mil_06

VIN2 VOUT3 14
1u_6.3V_X5R_04 4 1 C379 C389 50578-0140N-001
EN# GND
*180p_50V_NPO_04
*180p_50V_NPO_04
C386 PCB Footprint = 85201-14x5_R
SY6288DCAC 1000p_50V_X7R_04
23,29,32 DD_ON# Close to J_AUDIO1 C444 *0.1u_10V_X5R_04
EMI 10/30
EMI Require AUDG

w
w
B - 26 SATA ODD, LED

Schematic Diagrams
HDMI, RJ45
m
LAN PORT
o
L28
1 L26 2 J_RJ1
1 16 LMX1+ DLMX1+ 1 GND1
24 LAN_MDIP0 2 RD+ RX+ 15 LMX1- 4 3 DLMX1- 2 DA+ shield GND2
24 LAN_MDIN0 RD- RX- DA- shield
.c
3 14 NMCT_1 *WCM2012F2S-SHORT DLMX2+ 3
RD_CT RX_CT DLMX2- 6 DB+
DB- GND
4 13 1 L27 2
5 NC NC 12 NMCT_3 4
NC NC 4 3 5 DC+
*WCM2012F2S-SHORT NMCT_4 7 DC-
6 11 NMCT_2 8 DD+
7 TD_CT TX_CT 10 LMX2+ DD-
24 LAN_MDIP1 8 TD+ TX+ 9 LMX2- 130451-0M
24 LAN_MDIN1 TD- TX-
40 mil NS0013LF 6-21-B4060-008
6-21-B4040-008
x
C295 C292 C294 NMCT_1 R1 75_1%_04 NMCT_R
NMCT_2 R3 75_1%_04
NMCT_3
Sheet 26 of 38
0.01u_16V_X7R_04 *0.01u_16V_X7R_04 *0.01u_16V_X7R_04 R2 75_1%_04
NMCT_4 R4 75_1%_04
C293
1000p_2KV_X7R_12
fi
R241
*28mil_short_06
HDMI, RJ45
a
5VS_HDMI
For ESD
FOR INTEL GRAPHIC HDMI CONNECTOR
C
A
A
R338 R337
2.2K_04 2.2K_04
in
D17 D18 D13
AC
AC
AC
5VS D16 5VS_HDMI
RB551V-30S2 *BAV99 RECTIFIER *BAV99 RECTIFIER
C189 0.1u_10V_X7R_04 HDMIC_C0CN_C A C 5VS_HDMI_INR327 0.5_1%_04 *BAV99 RECTIFIER
15 HDMIC_C0CN
15 HDMIC_C0CP C184 0.1u_10V_X7R_04 HDMIC_C0CP_C J_HDMI1 HDMI_SCL-C
116B-1A002-21U
HDMI_SDA-C
15 HDMIC_C1CN C172 0.1u_10V_X7R_04 HDMIC_C1CN_C
15 HDMIC_C1CP C177 0.1u_10V_X7R_04 HDMIC_C1CP_C C347 C348 HDMI_HPD-C
3.3VS *10u_6.3V_X5R_06 22u_6.3V_X5R_08

C204 0.1u_10V_X7R_04 HDMIC_C2CN_C 19 HDMI_HPD-C
15 HDMIC_C2CN 18 HOT PLUG DETECT
15 HDMIC_C2CP C196 0.1u_10V_X7R_04 HDMIC_C2CP_C Q11A
2
MTDK5S6R +5V 17
G
DDC/CEC GND
15 HDMIC_CLKCN
15 HDMIC_CLKCP
C167
C170
0.1u_10V_X7R_04 HDMIC_CLKCN_C
0.1u_10V_X7R_04 HDMIC_CLKCP_C
HDMI_CTRLCLK 1 6 HDMI_SCL-C
h HDMI_SDA-C 16
14
SDA
RESERVED
SCL
15
13
HDMI_SCL-C
S
HDMI_CEC
R139 *2.2K_04 3.3VS HDMIC_CLKCN_C 4 L11 3 TMDS_CLOCK# 12 CEC
TMDS CLOCK- 11
HDMI_CTRLCLK Q11B HDMIC_CLKCP_C 1 2 TMDS_CLOCK 10 CLK SHIELD
15 HDMI_CTRLCLK TMDS CLOCK+
5
HDMI_CTRLDATA MTDK5S6R *WCM2012F2S-SHORT 9 TMDS_DATA0# 4 L15 3 HDMIC_C2CN_C

G
15 HDMI_CTRLDATA TMDS DATA0-

8
.c
HDMI_CTRLDATA4 3 HDMI_SDA-C SHIELD0 7 TMDS_DATA0 1 2 HDMIC_C2CP_C
HDMIC_C1CN_C 4 L12 3 TMDS_DATA1# 6 TMDS DATA0+ *WCM2012F2S-SHORT
15 HDMI_HPD TMDS DATA1-
S
5
HDMIC_C1CP_C 1 2 TMDS_DATA1 4 SHIELD1
TMDS DATA1+
R129
R137
R145
3 4 L14 3
R156
*WCM2012F2S-SHORT TMDS_DATA2# HDMIC_C0CN_C
2 TMDS DATA2-
SHIELD2 1 TMDS_DATA2 1 2 HDMIC_C0CP_C
TMDS DATA2+ *WCM2012F2S-SHORT
5VS
R171
R183
R188
R190
680_04
680_04
680_04
680_04
G
S D HDMIGND
3.3VS
w
680_04
680_04
680_04
680_04
Q10
MTN7002ZHS3
R315
HDMIGND
G
1M_04 Q9
MTN7002ZHS3
HDMI_HPD S D HDMI_HPD-C
w
R297 20K_1%_04
w
HDMI, RJ45 B - 27
Schematic Diagrams
AUDIO CODEC VT1802S
m
CODEC VT1802S PVDD1_2 R371
*15mil_s hort_06
La yout note:
1.5V
R361 *0_06 5VS GND a nd AUDG spa ce is EMI Require
For 1.5V HDA Link. DVDD_IO C414 C415 60mils ~ 100mils
20 mil L35 *HCB1005KF-121T20
o
R359 *28mil_short_06 0.1u_16V_Y 5V_04 10u_6.3V_X5R_06
3.3VS_AUD
JP2 *10mil_short_04
For 3.3V HDA Link. C381 C395
JP1 *10mil_short_04
10u_6.3V_X5R_06 0.1u_16V_Y5V_04 VT1802P L25 ,C704¤£¤W¥ó
C438 0.1u_16V_Y5V_04
C410 C408 ALC269VB L25,C704 -n¤W¥ó
C431 0.1u_16V_Y5V_04
.c
PULL HIGH 3.3VS_AUD FOR VT1802P 0.1u_16V_Y 5V_04 10u_6.3V_X5R_06
PULL HIGH 5VS_AUD FOR ALC269VB 3.3VSHCB1005KF-121T20
L34 3.3VS_AUD
5VS_AUD L36 5VS
PD# Control AZ_RST# For 3.3V *HCB1005KF-121T20 AUDG
HDA Link De-pop C400 C397 C403

5VS_AUD 3.3VS_AUD C422 C425 C423 C426 C424
D20 0.1u_16V_Y5V_04 10u_6.3V_X5R_06 0.1u_16V_Y 5V_04
1 A 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 10u_6.3V_X5R_06 10u_10V_Y 5V_08 *1u_6.3V_Y5V_04
12 HDA_RST# C 3 INT_MIC_OUT
R377 R362
2 A 10/26 AUDG_R INT_MIC_OUT 22
ANALOG DIGITAL
28 KBC_MUTE# AUDG_R 22
*10K_04 10K_04 C399 100p_50V_NPO_04
25
39
46
38
AUDG
9
BAT54AS3 U22 AUDG
Close to Codec
DVDD1
PVDD1
PVDD2
AVDD1
AVDD2
DVDD-IO
EAPD_MODE C A 4 13
x
PD# SENSE_A R368 20K_1%_04
PD# Sense A JD_SENSE 25
VT1802P
D
D21 *RB751S-40C2 14 LINE2-L R363 39.2K_1%_04
SPKOUTL+ 40 LINE2-L 15 LINE2-R JD_SENSE_B 25
MIC2-VREFO R3843.3K_04
3.3K_1%_04
R381 *100K_04 G Q14 SPKOUTL- 41 SPK-L+ LINE2-R VT1802P 10u *10mil_short_04 J_INTMIC1
5VS_AUD SPK-L- 16
Sheet 27 of 38 *2N7002W MIC2_L C402 10u_6.3V_X5R_06 INT_MIC INT_MIC R389 1K_04 R393 INT_MIC_OUT
S
SPKOUTR- 44 MIC2-L 17 MIC2_R C407 10u_6.3V_X5R_06 AUDG_R 2
Q12 SPKOUTR+ 45 SPK-R- MIC2-R C404 R395 *10mil_short_04 1
HDA_RST# G *BSS138_NL SPK-R+ 18 SENSE-B
VT1802P C434 *85205-02701
fi
Sense-B VT1802P 5.1K_1%_04
AUDIO CODEC AZ_RST# For 1.5V 3.3VS_AUD R366 100K_04 EAPD_MODE 47 0.022u_16V_X7R_04 100P 100p_50V_NPO_04
S
48 SPDIFC2/EAPD 19 JDREF R373 5.1K_1%_04
HDA Link De-pop SPDIFO JDREF 20 MONO-OUT C412 100p_50V_NPO_04
DMIC-DAT 2 MONO-OUT
Very close to
VT1802S DMIC-CLK 3 GPIO0-DMIC-DAT 21 MIC1-L_R C417 10u_6.3V_X5R_06 MIC1_L AUDG
Layout Note: Audio Codec GPIO1-DMIC-CLK MIC1-L 22 MIC1-R_R C419 10u_6.3V_X5R_06 MIC1_R AUDG R394
R360 33_04 MIC1-R
12 HDA_SDIN0 DIGITAL ANALOG 23 LINE1-L VT1802P 10u
µøLAYOUTª¬ªp, ¦p¤Ó»·¥i¼u©Ê *0_04
5 LINE1-L 24 LINE1-R C430 0.1u_10V_X7R_04
12 HDA_SDOUT SDATA-OUT LINE1-R ÃB¥~¤Á¤@GROUND¦A»PGND³s±µ
VT1802P 10u
6 27 VREF-ALC269 C433 10u_6.3V_X5R_06
a
12 HDA_BITCLK BIT-CLK VREF
AZ_SDIN0_R 8 28 LDO_CAP C432 *10u_6.3V_X5R_06
12 HDA_SYNC SDATA-IN LDO_CAP 30 MIC1-VREFO-R
MIC1-VREFO-R VT1802P NC PIN Close to Codec
10 29 MIC2-VREFO MIC1_R R387 75_1%_04
SYNC MIC2-VREFO MIC1_L MIC1-R 25
D19 FOR VOLUMN R388 75_1%_04
PC BEEP BAT54CS3 HDA_RST# 11 32 HEADPHONE-L MIC1-L 25
1 A ADJUST RESET# HP-OUT-L 33 HEADPHONE-R HEADPHONE-L 25
AUDG C435 C436
28 KBC_BEEP HP-OUT-R HEADPHONE-R 25
MIC1-VREFO-L
C 3 BEEP R358 10K_04 BEEP_R PCBEEP 12
PCBEEP
in
2 A 35 CBN-AL269 C427 2.2u_6.3V_X5R_06 *0.022u_16V_X7R_04
12 HDA_SPKR CBN
R356 5.1K_04 C393 1u_6.3V_X5R_04 AUDG *0.022u_16V_X7R_04
36 CBP-ALC269
DVSS2
PVSS1
PVSS2
AVSS1
AVSS2
C385 100p_50V_NPO_04 CBP 34 OPVEE-ALC269 MIC1-VREFO-L R386 4.7K_1%_04
GND
OPVEE MIC1-VREFO-R R385 4.7K_1%_04
C428
43
37
42
49
26
31
FOR VT1802P VT1802S
2.2u_6.3V_X5R_06
Very close to Audio Codec SPKOUTR- L37 FCM1608K-121T06

HDA_SDIN0 MIC2_L SPKOUTR-_R 25
C382 22p_50V_NPO_04 AUDG R364 *1M_04 R370 AUDG
MIC1-VREFO-L SPKOUTR+ L38 FCM1608K-121T06
HDA_SDOUT MIC2_R SPKOUTR+_R 25
C392 22p_50V_NPO_04 AUDG R369 *1M_04 The rmal Pa d pla ce 9 *0_04
C380
C394
22p_50V_NPO_04
22p_50V_NPO_04
3.3VS_AUD
HDA_SY NC
HDA_RST#
AUDG
AUDG
R375
R378
h
*1M_04
*1M_04
MIC1-L_R
MIC1-R_R
Via hole.
VT1802P±µAUDGAUDG
ALC269 ±µ GND
·í½T»{¤£·|ÅÜ§ó«á,¥i§ïSHORT¹s¥ó
Close to U22
C440
180p_50V_NPO_04
C441
180p_50V_NPO_04
.c
Headphone Anti-Pop Circuit
3.3VS HEADPHONE-L
5VS HEADPHONE-R
20m s
6
D
AZ_RST# R367 R390 Q15A
SPKOUTL+ L23 *28mil_06 SPKOUTL+_L *220K_04 2G *MTDK5S6R
S
1
C257 C260 *10K_04
S
EAPD_MODE G Q13
PD#
3
1000p_50V_X7R_04 180p_50V_NPO_04 *NDS352AP AUDG D
LEFT J_SPKL1 R392 R391 Q15B
w
5G *MTDK5S6R
D
SPKOUTL- L24 *28mil_06 SPKOUTL-_L 1 S
Spe ake r w ire le ngth le ss than 8000m ils , It don't ne ed LC Filte r.
4
2 *4.7K_04 *10K_04
SPKOUTR+,R-,L+,L- Tra ce width C252 50271-0020N-001 C437
*10u_6.3V_X5R_06
Spe ake r 4 ohm------> 40mils 180p_50V_NPO_04 AUDG
J_SPK1
Spe ake r 8 ohm------> 20mils EMI Require 2 1 AUDG
w
Please Let LC Filter togethe r and close to Codec.IF

Speaker w ire le ngth is le ss than 8000m ils It don't La yout note :
nee d the LC Filter. Close to codec
w
B - 28 AUDIO CODEC VT1802S

Schematic Diagrams
KBC-ITE IT8518E
m
KBC_AVDD L9
HCB1005KF-121T20
VDD3
VDD3 VDD3
C188 C190 C187 C157 C339
C153 C155 C152
0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04 10u_6.3V_X5R_06 0.1u_16V_Y 5V_04 0.1u_16V_Y5V_04
0.1u_16V_Y5V_04 *0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04
R103
o
C168
100K_04
0.1u_16V_Y 5V_04 KBC_AGND
L10 *28mil_short_06 EC_VCC KBC_WRESET#
3.3VS
C160
114
121
127
J_KB1
92
11
26
50
74
3
U4 85208-24051 1u_6.3V_X5R_04
.c
VSTBY
VSTBY
VSTBY
VSTBY
VSTBY
VSTBY
VCC
AVCC
VBAT
10 58 KB-SI0 4 1 J_KB1 24
12 LPC_AD0 9 LAD0 KSI0/STB# 59 KB-SI1 5
12 LPC_AD1 8 LAD1 KSI1/AFD# 60 KB-SI2 6
12 LPC_AD2 7 LAD2 KSI2/INIT# 61 KB-SI3 8
12 LPC_AD3 PCLK_KBC 13 LAD3 KSI3/SLIN# 62 KB-SI4 11
16 PCLK_KBC 6 LPCCLK KSI4 63 KB-SI5 12
12 LPC_FRAME# 5 LFRAME# KSI5 64 KB-SI6 14
12 SERIRQ 22 SERIRQ LPC K/B MATRIX KSI6 65 15
EC MODULE CHOOSE (FOR DIFFERENCE K/B TYPE)
KB-SI7
16,21,24 BUF_PLT_RST# LPCRST#/WUI4/GPD2( PU ) KSI7
KBC_WRESET# 14 36 KB-SO0 1 VER. RX VOLTAGE MODEL_ID
WRST# KSO0/PD0 37 KB-SO1 2
126 KSO1/PD1 38 KB-SO2 3
17 GA20 GA20/GPB5 KSO2/PD2
V1.0 R151 10K/ R150 X 3.3V
4 39 KB-SO3 7
35 AC_IN# 16 KBRST#/GPB6( PU ) KSO3/PD3 40 KB-SO4 9 R151 X /R150 10K 0V
x
25 LED_ACIN 20 PWUREQ#/GPC7( PU ) KSO4/PD4 41 KB-SO5 10
14,16 AC_PRESENT L80LLAT/GPE7( PU ) KSO5/PD5 42 KB-SO6 13
23 KSO6/PD6 43 KB-SO7 16
16,17 SMI# 15 ECSCI#/GPD3( PU ) KSO7/PD7 44 KB-SO8 17 HSPI_CE#_R MODEL_ID
R135 *10K_04 R64 10K_04
17 SCI# ECSMI#/GPD4( PU ) KSO8/ACK# 45 KB-SO9 18 HSPI_SCLK_R VDD3
R143 *10K_04
WLAN_EN 76
77
DAC
GPJ0
KSO9/BUSY
KSO10/PE
KSO11/ERR#
46
51
52
KB-SO10
KB-SO11
KB-SO12
19
20
21
HSPI_MSO_R
HSPI_MSI_R
R152
R165
*10K_04
*10K_04
R82
RX
*10K_04
Sheet 28 of 38
fi
27 KBC_MUTE# 78 GPJ1 KSO12/SLCT 53 KB-SO13 22
12
22
ME_WE
CPU_FAN
79
80
81
DAC2/GPJ2
DAC3/GPJ3
DAC4/GPJ4 IT8518
KSO13
KSO14
KSO15
54
55
KB-SO14
KB-SO15
23
24 VDD3 KBC-ITE IT8518E
17 CRIT_TEMP_REP# DAC5/GPJ5 3G_DET# R66 *10K_04
ADC 6-03-08518-0P2
FLASH For 8587 CCD_DET# R65 10K_04
BAT_DET 66 100 3G_POWER_EN R167 *10K_04
35 BAT_DET BAT_VOLT 67 ADC0/GPI0 FLFRAME#/GPG2 101 KBC_SPI_CE# VDD3 SMC_CPU_THERM_R R178 43_1%_04
35 BAT_VOLT 68 ADC1/GPI1 FLAD0/SCE# 102 KBC_SPI_SI SMC_CPU_THERM_R H_PECI 3,17,29
R191 *0_04 R179 *0_04
69 ADC2/GPI2 FLAD1/SI 103 KBC_SPI_SO SUS_PWR_ACK 14 SMD_CPU_THERM_R SMC_CPU_THERM 13
R180 *0_04
2 THERM_VOLT 70 ADC3/GPI3 FLAD2/SO 104 SMD_CPU_THERM 13
R77 10_04 TOTAL_CUR_R R182 *10mil_short_04
a
35 TOTAL_CUR 3G_DET# 71 ADC4/GPI4 FLAD3/GPG6 105 KBC_SPI_SCLK AIRPLANE# 25
CCD_DET# 72 ADC5/GPI5 FLCLK/SCK 106
MODEL_ID 73 ADC6/GPI6 ( PD )FLRST#/WUI7/GPG0/TM CCD_EN 22 PCLK_KBC PCLK_KBC_R
R110 *10_04 C162 *10p_50V_NPO_04
ADC7/GPI7 BAT_VOLT C151 1u_6.3V_X5R_04
GPIO 56
110
SMBUS ( PD )KSO16/GPC3 57 SUSB# 6,14,29 Close to EC, for 8587 TOTAL_CUR_R C154 1u_6.3V_X5R_04
35 SMC_BAT_R 111 SMCLK0/GPB3 ( PD )KSO17/GPC5 SUSC# 14,32 KBC_SPI_CE# R123 *0_04
35 SMD_BAT_R SMC_VGA_THERM 115 SMDAT0/GPB4 93 USB_CHARGE_EN KBC_SPI_SI R166 *0_04
SMD_VGA_THERM 116 SMCLK1/GPC1 ( PD )GPH0/ID0 94 BT_EN KBC_SPI_SO R147 *0_04
in
SMC_CPU_THERM_R 117 SMDAT1/GPC2 ( PD )GPH1/ID1 95 KBC_SPI_SCLK R132 *0_04
SMD_CPU_THERM_R 118 SMCLK2/GPF6( PU ) ( PD )GPH2/ID2 96 HSPI_CE#_R BKL_EN 11
SMDAT2/GPF7( PU ) ( PD )GPH3/ID3 97 HSPI_SCLK_R
( PD )GPH4/ID4 98 HSPI_MSO_R HSPI_CE#_R R124 *10mil_short_04
LCD_BRIGHTNESS 24
PWM ( PD )GPH5/ID5 99 HSPI_MSI_R HSPI_SCLK_R HSPI_CE# 12
R141 *10mil_short_04
25 PWM0/GPA0( PU ) ( PD )GPH6/ID6 107 HSPI_MSO_R HSPI_SCLK 12
R151 *10mil_short_04 HSPI_MSO 12
27 KBC_BEEP LED_SCROLL# 28 PWM1/GPA1( PU ) ( PD )GPG1/ID7 DD_ON 29,30 HSPI_MSI_R
For 8587 R161 *10mil_short_04
LED_NUM# 29 PWM2/GPA2( PU ) HSPI_MSI 12
EXT GPIO R193 *10K_04
LED_CAP# 30 PWM3/GPA3( PU ) 82 AC_DET VDD3
31 PWM4/GPA4( PU ) ( PD )EGAD/GPE1 83 dGPU_RST#
25 LED_BAT_CHG 32 PWM5/GPA5( PU ) ( PD )EGCS#/GPE2 84 VDD3
25 LED_BAT_FULL 34 PWM6/GPA6( PU ) ( PD )EGCLK/GPE3 H_PROCHOT#_EC 3
25 LED_PWR PWM7/GPA7( PU )
WAKE UP 35
PS/2 NC2
21
21
21
22
22
80CLK
BT_DET#
3IN1
14 SY S_RESET#
TP_CLK
TP_DATA
R114 *0_04
85
86
87
88
89
90
125
PS2CLK0/GPF0(
PS2DAT0/GPF1(
PS2CLK1/GPF2(
PS2DAT1/GPF3(
PS2CLK2/GPF4(
PS2DAT2/GPF5(
WAKE UP
PU
PU
PU
PU
PU
PU
)
)
)
)
)
)
PWM/COUNTER
( PD )WUI5/GPE5
( PD )LPCPD#/WUI6/GPE6
( PD )TACH0/GPD6
( PD )TACH1/GPD7
( PD )TMRI0/WUI2/GPC4
( PD )TMRI1/WUI3/GPC6
17
47
48
120
124
h RSMRST# 14
KBC_RST# 17
CPU_FANSEN 22
PM_PCH_PWROK 14
ALL_SY S_PWRGD 11,14,29,33
SHORT
C350
0.1u_16V_Y5V_04
SPI_VDD_1 8
32Mbit
U15
VDD
SO
SI
5
2
KBC_SPI_*_R = 0.1"~0.5"
KBC_SPI_SI_R
KBC_SPI_SO_R
R336
R329
47_04 KBC_SPI_SI
15_1%_04 KBC_SPI_SO
.c
3G_EN
PWRSW/GPE4( PU ) R333 1K_04 KBC_FLASH 3 1 KBC_SPI_CE#_R R324 15_1%_04 KBC_SPI_CE#
18
CIR 119 WP# CE#
29 PWR_SW# 21 RI1#/WUI0/GPD0( PU ) ( PD )CRX/GPC0 123 VCORE_PWRGD 14 6 KBC_SPI_SCLK_R R334 KBC_SPI_SCLK
47_04
11,23 LID_SW# RI2#/WUI1/GPD1( PU ) ( PD )CTX/GPB2 PME# 16 SCK
*10mil_short_04
LAN_PCIE_WAKE# 24 7 4
GP INTERRUPT LPC/WAKE UP R275 R331 4.7K_04 KBC_HOLD#
33 19 HOLD# VSS
14 PWR_BTN# GINT/GPD5( PU ) ( PD )L80HLAT/GPE0 SWI# 14 MXIC 6-04-25320-490
MX25L3206E
112 EON 6-04-02532-491
( PD )RING#/PWRFAIL#/LPCRST#/GPB7 PMOSFET_ CONTROL# 35
108
UART
R177 *0_04 CLOCK GD 6-04-02532-A90
21 WLAN_CON_POWER 109 RXD/GPB0( PU ) 2 CK32KE
AVSS
R138 *0_04
VSS
VSS
VSS
VSS
21 WLAN_DET# NB_ENAVDD 11,15

VSS
VSS
VSS
TXD/GPB1( PU ) CK32KE 128 CK32K R149 *0_04

CK32K ICPPE# 17 AMIC 6-04-02532-492
w
IT8518E/HX
27
1
12
49
91
113
122
75
R148
R116 *0_04 EC_VSS *10mil_short_04
C165 0.1u_16V_Y 5V_04
NC1 SHORT
w
R96 *10mil_short_04 LCD_BRIGHTNESS KBC_AGND

11 BRIGHTNESS
C159 *0.1u_16V_Y 5V_04

w
KBC-ITE IT8518E B - 29
Schematic Diagrams
5VS, 3VS, 1.5VS CPU
m
VIN VA VIN1
PR150 *0_04 PU7

1 8 PR58 100K_04 DD_ON
VA VIN1
2 7 DDON_LATCH
o
PD16 VIN DD_ON_LATCH
C A PR151 1K_04 3 6 PWR_SW#_R PR60 10K_04
22,35 M_BTN# M_BTN# PWR_SW# VDD3
R299 *100K_04 4 5 PR59 1K_04
MDL914S2 INSTANT-ON GND PWR_SW# 28
P2808B0
.c
PJ9
2
*OPEN-3mm
1 3.3V
NMOS
VDD3
VIN VIN
5V
NM OS
Short PJ9¡Acost down 5V MOS SY S15V VDD3
8
PQ35A
MTNN20N03Q8
2
3.3V PR159
PC9 PC67
3A
7 1 100K_04
PQ12A
*0.01u_50V_X7R_04
0.01u_50V_X7R_04
PR67 Power Plane
SY S15V VD D5 *MTNN20N03Q8 5V DD_ON#
8 2 DD_ON# 23,25,32
1M_04 PC143 PC144 PR71
3A
x
3
6
7 1 *100_1%_04 D PC145
PR162 3.3V_EN1 10u_10V_Y 5V_08
4
PQ35B *0.1u_16V_Y 5V_04 2G * 0.1u_16V_Y 5V_04
28,30 DD_ON S PQ34A
*1M_04 PC58 PC53 PR75 MTNN20N03Q8
D
3
1
PC48 MTDK5S6R
Sheet 29 of 38 5V_EN1 *10u_10V_Y 5V_08 5 PQ14 PR66
4
PQ12B *0.1u_16V_Y 5V_04 *100_1%_04 1000p_50V_X7R_04 DD_ON# G *MTN7002ZHS3
*MTNN20N03Q8 100K_04 EMI
fi
D
S
6
5VS, 3VS, 1.5VS PC56
*2200p_50V_X7R_04
5
DD_ON# G
PQ16
*MTN7002ZHS3 ON
ON
1
6
S
CPU 2
PJ11
*40mil ON
VDD 3
PR160
3.3VS
a
5VS
NMOS
ON NMOS
10K_04
SUSB
SUSB 31,32
PQ36A
3
PQ34B D PC146
PQ13A SY S15V VDD3 MTNN20N03Q8 3.3VS MTDK5S6R
SY S15V VD D5 MTNN20N03Q8 5VS 8 2 5G * 0.1u_16V_Y 5V_04
8 2 7 1 6,14,28 SUSB# S
4
7 1
in
PR161 PR69 PC49 PC51
PR68
10u_6.3V_X5R_06
*0.1u_16V_Y5V_04
1M_04 PC57 PC54 PR70 1M_04 75_04
3
*75_04
5VS_EN1 *0.1u_16V_Y 5V_04 3.3VS_EN1
10u_6.3V_X5R_06 ON ON
D 3.3VS_LO
4
PQ13B
D
PC55 MTNN20N03Q8 PC52

PQ11
3300p_50V_X7R_04 5 SUSB G *2SK3018S3 4700p_50V_X7R_04 C199 *0.01u_16V_X7R_04
3,14 H_PM_SY NC
4
PQ36B
S
1
MTNN20N03Q8 C173 *0.01u_16V_X7R_04

3,17,28 H _PECI
6
PJ10 PQ10
5 SUSB G MTN7002ZHS3 C156 *0.01u_16V_X7R_04
*40mil
h 6,14,28 SUSB#
S
2
C351 *0.01u_16V_X7R_04
3,17 H_SNB_IVB#
6
C164 *0.01u_16V_X7R_04
11,14,28,33 ALL_SY S_PWRGD
ON C213 *0.01u_16V_X7R_04
14,33 DELAY _PWRGD
ON
1.5VS_CPU
.c
VIN C272 *0.01u_50V_X7R_04
1.5V
NM OS 1.5VS_CPU
15A
1.5VS
NMOS
C266
C280
*0.01u_50V_X7R_04
*0.01u_50V_X7R_04
PJ5 PQ15
1 2 1.5V *MTN2604G6 1.5VS 1.5VS_CPU C135 *0.01u_16V_X7R_04
SY S15V 6 3.3VS
SY S15V 5 PJ31
*OPEN-8mm
PQ31A
2
1
4 200mA 1 2
3,17 H_CPUPWRGD C176 *0.01u_16V_X7R_04
PR48 PR73 C195 *0.01u_16V_X7R_04
MTNN20N03Q8 C23 *0.01u_16V_X7R_04
PR149 8 2 100_04 *1M_04 PC60 PC61 PR74 *40mil
3
7 1
D1.5VS_CPU_LO
*100_04
10u_6.3V_X5R_08
1.5VS_EN1
0.1u_16V_Y5V_04
1M_04 C248 *0.01u_16V_X7R_04
w
PC134 PC135 14,31 1.8VS_PWRGD
1.5VS_LO
3
1.5VS_CPUEN1 0.1u_16V_Y 5V_04 10u_6.3V_X5R_06 C86 *0.01u_16V_X7R_04

3,14 PM_DRAM_PWRGD
4
PQ31B
MTNN20N03Q8 PQ8 PC59 EMI Require
3
6
PC133 MTN7002ZHS3 D D PQ17A
5 SUSB G *2200p_50V_X7R_04 *MTDK5S6R
2200p_50V_X7R_04 G5 SUSB 2G
S
S S
w 6
1
PQ17B
*MTDK5S6R
ON ON
w
B - 30 5VS, 3VS, 1.5VS CPU

Schematic Diagrams
VDD3, VDD5
m
o
VREF_VDD
PR55 *0_04 PR52 *20mil_04
.c
PC34
1u_10V_Y 5V_06
VFB2 VFB1
TONSEL
PR153 PR50
EN_3V EN_5V
PC136
110K_1%_04 110K_1%_04 PC137
1000p_50V_X7R_04 1000p_50V_X7R_04
1
PU6
VREG3
EN2
VFB2
TONSEL
VFB1
EN1
VREF
x
VIN
VIN
7 24
PC44 PC43 VO2 VO1
PC138 PR154 *10K_04
VDD3
4.7u_25V_X5R_08 4.7u_25V_X5R_08
1u_10V_Y 5V_06
PC140
8
LDO3 POK
23 5608POK
PC139
SY S5V
PC41 PC46 PC42
VDD5 Sheet 30 of 38
10
10
6
5
5
6
fi
BOOT2 9 22 BOOT1 0.1u_50V_Y 5V_06 4.7u_25V_X5R_08 4.7u_25V_X5R_08
VDD3
PQ33A
EMB17A03V 4
0.1u_10V_X7R_04
UGATE2 10
BOOT2
UGATE2
G5608
BOOT1
UGATE1
21
0.1u_10V_X7R_04
UGATE1 4
PQ32A
EMB17A03V SY S5V VDD5
VDD3, VDD5
SY S3V PL9 PL10
PJ7 5A TMPC0603H-4R7M-Z01 TMPC0603H-4R7M-Z01 5A 1 PJ8
3
3
2 1 2 1 PHASE2 11 20 PHASE1 1 2 2
PHASE2 PHASE1
Ra
7
8
9
PC33 *1000p_50V_X7R_04
*OPEN-5m m PQ32B *OPEN-5mm
PR65
PQ33B LGATE2 12 19 LGATE1 EMB17A03V PR51
GND PAD
SKIPSEL
LGATE2 LGATE1
9
8
7
EMB17A03V PR64
a
2
LDO5
VCLK
PC50 + PC151 PR53 PC35 30K_1%_06
GND
EN0
VIN
0.1u_16V_Y 5V_04 *5.1_06
*5.1_06
2
100p_50V_NPO_04
220u_6.3V_6.3*6.3*4.2
13K_1%_06
PD10 PD9
1
Rb
13
25
16
18
14
15
17
A C C A + PC152 PC147
VREG5 VREG5
1
PR157 PR54
VIN_6182
220u_6.3V_6.3*6.3*4.2
EN_ALL PC47 0.1u_16V_Y 5V_04
RB0540S2 RB0540S2
SKIPSEL
PR56 18.7K_1%_06
PC45
*680K_1%_04
in
20K_1%_04 PR156 PR155 M990125 *220p_50V_NPO_04
*220p_50V_NPO_04
PR62 PD11
VREF_VDD PR61 *20mil_04 *0_04 *20mil_04 *0_04 BAT54SS3
PR158 PC38 A 1
3 C SY S5V
VREG5 PR63 *0_04 2.2_06
A 2
SY S10V
0.01u_50V_X7R_04
VIN1 VREG5
PC40
PD12
PC142 PC141
C A PD8 2200p_50V_X7R_04
VIN
4.7u_25V_X5R_08 1u_10V_Y 5V_06 BAT54SS3
PC39 A 1
3 C
VREG5
RB751V
EN_3V5V PR152 *0_04 EN_3V

h 0.01u_50V_X7R_04
A 2
PC37
SY S15V
2200p_50V_X7R_04
.c
PR57
R68 EN_5V
10K_04 *10mil_short_04
3
D
PQ9B
DD_ON_EN_VDD 5G MTDK5S6R
S
4
6
D
1
2G PJ6 PC36 PR49

28,29 DD_ON S PQ9A *40mil
1
MTDK5S6R 100K_04
w
2
0.1u_16V_Y 5V_04
w
w
VDD3, VDD5 B - 31
Schematic Diagrams
Power 0.85VS, 1.8VS
m
-n²¾¾aªñPIN6¸}
3 .3V
PC131
5V
1.8VS
2A PU5 2.2u_6.3V_X5R_06 V1.8
o
PR145 1K_04 5 6 1.8VS
3.3V
1.8VS_PWRGD
9
7
VIN
VIN
VCNTL
4
2A 1
PJ19
2
R44 *10mil_short_04 POK_6610
14,29 1.8VS_PWRGD POK VOUT
3 *OPEN-3mm
PR148 1K_04 EN1.8VS1 8 VOUT
5V EN PC 129 PC128 PC125
PC132 1 2 VFB_6610 PR146 1.3K_1%_04
D
GND VFB
*10u_6.3V_X5R_06
10u_6.3V_X5R_06
0.1u_16V_Y5V_04
PQ7
.c
MTN7002ZHS3 15p_50V_NPO_04
PR47 1M_04 EN1.8VS G AX6615ESA PC130 47p_50V_NPO_04
29,32 SUSB
S
PC126 PC124
PC32
0.1u_16V_Y 5V_04 10u_6.3V_X5R_06
2200p_50V_X7R_04 PR147
6-02-06615-320 1K_1%_04
6-02-07113-320 Vout= 0.8*(PR73+PR72)/PR72=1.84V
x
Sheet 31 of 38
fi
Power 0.85VS,
1.8VS
V1.05
a
3.3V PR42 *10mil_short
5V PR41 *0_04
PC99
PC27 10u_6.3V_X5R_06
0.85VS
in
PU3
1u_6.3V_X5R _04
5 1
6 VIN D0 VCCSA_VID0 6
PR 40 10K_04 7 VPP 2 V0.85 PJ15 0.85VS
14 0.85VS_PWRGD POK D1 VCCSA_VID 1 6
*OPEN-5mm
0.85V_ON 8 VO
3 3A 1 2
VEN/MOOE
9 4
GND VO
PC97 PC98 PC96
G978
10u_6.3V_X5R_06
10u_6.3V_X5R_06
*10u_6.3V_X5R_06
h
.c
5V
Del PJ17 10/30

VDD3
PR139
100K_04 0.9V 0.8V 0.725V 0.675V
w
PR142 PR141 *0_04 VCCSA_VID0 0 0 1 1

0.85VS_EN 14
10K_04 0.85V_ON VCCSA_VID1 0 1 0 1
PQ28
D
MTN7002ZHS3 SET0 SET2 SET1 SET3

G PC119
S
*1u_6.3V_X5R_04
C
PR143 10K_04
B PJ18
w
1.05VS
PQ29 *40mil
2
E
BTN3904
w
B - 32 Power 0.85VS, 1.8VS

Schematic Diagrams
POWER 1.5V/1.05VS
m
PD19 VIN
A C PC 157 PC 156 PC 154 PC 155
5V
5
6
7
8
4.7u_25V_X5R _08
4.7u_25V_X5R _08
0.1u_50V_Y5V_06
0.1u_50V_Y5V_06
PQ37
PU8 RB0540S2 4 MTB11N03Q8
VDDQ
VTT_MEM
2
3
1
PC158
10u_6.3V_X5R _06
23 22 VBST PC159 0.1u_10V_X7R_04 1.5V
o
VLD OIN VBST VDD Q
PJ22 PL11
VTT_MEM
2 1 VTT 24
VTT DRVH
21 DRVH PR72
TMPC1004H -1R 0M-Z01
1 2
15A 1
PJ21
2
0_06 1.5V
*OPEN-2mm
PR171 1 20 LL PC 153 *OPEN -8mm
PC161 PC160 PC 162 VTTGND LL
*28m il_06
PR164 *1000p_50V_X7R_04 PC149 PC 148
C
10u_6.3V_X5R _06 10u_6.3V_X5R _06 *10u_6.3V_X5R_06 VTTSN S 2 19 DRVL PD 17 PD 18 + PC 150
.c
VTTSNS D RVL
0_06
220u_6.3V_6.3*6.3*4.2
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
5
6
7
8
5
6
7
8
3 18 PQ39
GND PGND
*SK34SA
17
C SOD140SH
VDDQ PR168 *20m il_04 PR165 *28mil_06 *MTB02N 03Q8
A
CS_GND 5V 4 4
PR172 *0_04 MODE 4 16 C S PR 166 6.2K_1%_04 PR 163
5V
2
3
1
2
3
1
MOD E CS
PR169 *0_04 15 PQ38 *5.1_06
PC 164 VTTREF 5 PVC C5 14 PR 167 2.2_06 MTB02N03Q8
0.1u_10V_X7R_04 VTTREF VC C5
5V PR 179 *28mil_06 COMP_VD D 6 13 PC163 PC 165
COMP PGOOD 3.3V
1u_6.3V_X5R _04
1u_6.3V_X5R_04
x
PR170 *22_04 VDD QSNS8 11 S5_6163
VTT_MEM VDDQSN S S5
PC166 PR178
PR173
D
*1000p_50V_X7R _04 PR174 9 10 100K_04 *28mil_06

PQ40 *10_04 VDDQSET S3
VDDQSET
SUSB G
Sheet 32 of 38
GN D
29,31 SU SB DDR 1.5V_PWR GD
*MTN7002ZHS3
NC
NC
DDR 1.5V_PWRGD 14
S
PC167
fi
G5616
POWER 1.5V/
12
25
7
*1000p_50V_X7R_04
5V PR177 *10K_1%_04
PR180 47K_04
PR175
R1
10.7K_1%_04
1.05VS
5V
PR176 10K_1%_04 Vout=(R1/R2+1)*0.75
D
3
R2 PQ43B D PQ42 PC169
a
PR182 100K_04 MTDK5S6R *MTN 7002ZHS3
5V 5G G
PR181 100K_04 0.1u_16V_Y 5V_04
1.5S_CPU_PWRGD PR183 *100K_04 VTTEN S
S
4
6
1
D PJ23
PC168
D
2G PQ43A *40m il
PQ41 14,28 SUSC #
MTN7002ZHS3 0.1u_16V_Y 5V_04 S MTD K5S6R
2
SUSB G 23,25,29 D D_ON#
in
S
FOR S3 REDUCE ¹w¯d

VIN
PR 130 820K_1%_06
PC30 PC31 PC112 PC113
4.7u_25V_X5R_08
4.7u_25V_X5R_08
0.1u_50V_Y5V_06
0.1u_50V_Y5V_06
PU 4 PQ24
MTB11N03Q8
5
6
7
8
PR131 100K_1%_04 PR 132 PC 114
5V
1.05V_ON 15
EN_PSV BST
13
0_06
h
0.1u_10V_X7R_04
4
2
3
1
PC111
D
16 12 V1.05 1.05VS
PQ6 5V TON DH PL7 PJ16
SUSB G TMPC 0603H-1R0M-Z01
1 11 1 2 1 2 12A
*0.1u_16V_Y5V_04
MTN7002ZHS3 PR134
S
VOU T LX
.c
2.2_04 PR135 *OPEN-8mm
2 10 3.6K_1%_04
VCC ILIM
3 9 PQ26
5V
C
VFB VD D
5
6
7
8
PC115 MTB02N03Q8 PC 110 PC103 PC116

+ +
PD14
220u_6.3V_6.3*6.3*4.2
0.1u_16V_Y5V_04
4 8 4
*220u_6.3V_6.3*6.3*4.2
1u_6.3V_X5R_04
PGOOD DL FM5822
2
3
1
PC117
A
6 7
AGN D PGN D 17 1u_6.3V_X5R_04
PGN D
NC
NC
w 5
14
3.3V PR 140 10K_04 G5602R41U PR138

0_04
PJ3 *6m il
14 1.05VS_PWR GD 2 1
VCCP_SENSE 5
PR137 40.2K_1%_04
w
PC 118 *15p_50V_NPO_04
PJ4 *6m il
PR136 2 1
VSSP_SENSE 5
100K_1%_04
w
POWER 1.5V/1.05VS B - 33
Schematic Diagrams
POWER VCORE1
m
o
1000P_50V_X7R_04
470p_50V_X7R _04
PC22 0.1u_10V_X7R_04 RT4
75K_1%_04
DROOPA
2
PUT COLSE
TH05-4F104FR
PC106
PC105
PR133
PR27 27K_1%_04 TO GT
PR127 CSCOMPA PC28 1000p_50V_X7R_04 CSREFA
Inductor
1
165K_1%_04 PR119 1.6K_1%_04
PR128 PC108 PC104 10p_50V_NPO_04
PUT COLSE 1.05VS
.c
TO CPU 10_1%_04 33p_50V_NPO_04 PR125 PC107
SOCKET PR17
*75_04 PR123 1K_1%_04 4.3K_1%_04 2200p_50V_X7R_04 10/25
10/25 PR126 68K_1%_06 TSEN SEA
PJ36 *6mil SW N1A 34 CSR EFA
1 2
13.7K_1%_04
VGFXCORE H_PR OCHOT# PC26
3 H_PR OCHOT#
FBA
0.047u_10V_X7R_04
PR 121 0_04
CSP1A
CSCOMPA
SWN1A 34
6 VR1_VCCGT_SENSEA 5VS
PC 23 RT3
2
PC 102 1000p_50V_X7R_04 PR34 3.48k _1%_04 PR129
PR122 * 0_04
TH05-4F104FR
PR 118 0_04 1000p_50V_X7R_04
PR 124
CSREFA
8. 25K_1%_04
CSREFA 34
6 VR 1_VSSGT_SENSEA
1
PR36
CSP2A
CSP1A
3.3VS PR14 *10m il_short_04
C SSU MA
DROOPA
TSENSEA
PC 24 0.1u_10V_X7R_04
TRBSTA#
IMONA
100_04
Sheet 33 of 38 PR26
10K_04 PR120 20. 5K_1%_1/16W_04
PUT COLSE
fi
PR32 2_06 PU2
59
57
52
50
61
60
58
56
55
54
53
51
49
48
47
46
POWER VCORE1 1.05VS
VR_RDY A
5VS NCP6132AMNR26 TO VGFX
HOT SPOT
VSNA
VSPA
DIFFA
FBA
COMPA
IOU TA
I LIMA
DROOPA
CSCOM PA
CSSUMA
CSREFA
CSP2A
CSP1A
T SNSA
TRBSTA#
EPAD
PC25 2.2u_6.3V_X5R_04
PR114 1 45
PR115 PR110 2 VC C PWMA 44 PR117 2_06 PC95 0.22u_10V_X5R_04
VR_RDY A 3 VD DBP BSTA 43 5VS
54. 9_1%_04 VR DY A HGA HG1A 34
4 42
75_1%_04
130_1%_04 VR_EN PR24 *10m il_short_04 SW1A 34
H_CPU_SVIDDAT 5 EN SWA 41
PJ1 *6mil LG1A 34
1 2 H_CPU_SVIDALRT#6 SD IO LGA 40
5 H_CPU_SVIDDAT H_CPU_SVIDD AT H_CPU_SVIDCLK 7 ALERT# BST2 39 HG2
a
5 H_CPU_SVIDALRT# H_CPU_SVIDALRT# PR22 10K_04 VBOOT 8 SC LK H G2 38
VBOOT SW 2
Option for
5 H_CPU_SVIDCLK H_CPU_SVIDC LK PR18 90.9K_1%_04 9 37 PR39
10 ROSC LG2 36 LG2
1 phase GT
VIN PC92 2.2u_6.3V_X5R_04 *0_04 PR33
H_PROCH OT# 11 VR MP PVCC 35 *10mil_short_04
PR19 1K_04 DELAY _PW RGD 12 VR HOT# PGND 34
VR DY LG1 LG1 34 5VS
13 33 CSP1A
VSN SW 1 SW1 34
3.3VS PC19 14 32
VSP H G1 HG1 34
15 31 CSP2A
CSCOMP
DIFF BST1
T RBST#
TSENSE
DROOP
C SSUM
0.01u_50V_X7R_04 PR100 2_06 PC90 0.22u_10V_X5R_04
DR VEN
CSR EF
C OMP
in
TSNS
C SP3
CSP2
CSP1
PR16 10K_04
PWM
IOUT
ILI M
14,29 DELAY _PWRGD
FB
PC 18 5VS
17
19
24
26
16
18
20
21
22
23
25
27
28
29
30
*1u_10V_Y 5V_06
Option for
TR BST#
CSP1 PR12 6.98K_1%_04 PR11
D ROOP
T SENSE
SWN1 34 2 phase CPU
5 VCOR E_VSS_SEN SE PR 109 *10mil_short _04 VSN PR97 25.5K_1%_04 *10mil_short_04 PR113 RT2
IM ON
TH 05-4F 104FR
PC91 PC10
8.25K_1%_04
1000P_50V_X7R_04 0. 047u_10V_X7R_04 CSP3
5 VCOR E_VCC_SENSE PR 108 *10mil_short _04 VSP PC 14 0.1u_10V_X7R_04
1
PR90 6.49K_1%_04
CSREF
3.3VS
h
PR103 10_1%_04 PC81 680p_50V_X7R_04
PR105
PR104
PC79
1K_1%_04 PC80
100p_50V_NPO_04PC 75
49.9_1%_04 PR93
33p_50V_NPO_04
4700p_50V_X7R _04
4.12K_1%_0402
CSREF
C SP1
C SP2
C SP3
CSREF 34
PUT COLSE
TO VCORE
HOT SPOT
.c
CSCOMP
5VS
10K_04 PR102 1.21K_1%_04 PR94 10.7K_1%_04 PC17
PR107 TRBST# 1000p_50V_X7R _04
Option for
1
CSSUM PR96
PJ14 PC15 PR15 PC16
1 phase CPU *10m il_short_04
*6mil 4700p_50V_X7R_04 PC78 1200p_50V_X7R_04
21.5K_1%_04
1000p_50V_X7R_04
2
PR111 *10mil_short_04 PR 98 120K_1%_06 SW N1 34 CSP2

VR_EN SGND
11,14,28,29 ALL_SY S_PWR GD
PC74 470p_50V_X7R_04
w
PR112 PR 92
75K_1%_04 165K_1%_04
DROOP
RT1
2 1
CSCOMP CSREF
PUT COLSE
PR95 2. 43K_1%_04 PC76 1000p_50V_X7R_04
TO VCORE TH 05-4F 104FR
Phase 1
Inductor
w
w
B - 34 POWER VCORE1
Schematic Diagrams
POWER VCORE2
m
o
VIN
.c
PC171 PC172 PC63 PC70 PC66 PC8 PC82
+
+
*1000p_50V_X7R_04
4.7u_25V_X5R _08
4.7u_25V_X5R _08
*15u_25V_6.3* 4.4
*0.1u_50V_Y5V_06
0.1u_50V_Y5V_06
PQ22 EMI 10/30
*330uF_25V
MDU1516
G
H G1 PR106 *28mil_short_06 H G_1 CPU_CORE
33 HG1 DCR 1.1mohm PJ32
PL6
x
SW1 1 2 1 2
33 SW1 VC ORE
PC65 0.36UH _12.9* 14*3.8 25A *OPEN_12mm
LG1 PQ23 2200p_50V_X7R_04

33 LG1
*MDU1512 PQ21
Sheet 34 of 38
D
C
MDU1512 PD13
D
CSOD140SH PR31
fi
G
G
PR86 CSR EF CSREF 33
POWER VCORE2
S
2_06 10_04 CPU_CORE VCORE

S
A
PR29 *10mil_short_04 SW N1 33
PC109 PC101 PC94 PC100 PC93

+ + + + +
390uF_2.5V_10m_6.3*6
*390uF_2.5V_10m_6.3*6
390uF_2.5V_10m_6.3*6
390uF_2.5V_10m_6.3*6
*390uF_2.5V_10m_6.3*6
a
in
VIN
PC122 PC123 PC127

4.7u_25V_X5R _08
4.7u_25V_X5R _08
0.1u_50V_Y5V_06
PQ30
D
MDU1516
G
h
S
HG1A PR116 *28mil_short_06 H G_1A

33 HG1A
VGFXCORE VGFX_CORE
PL8
DCR 1.1mohm BCIH1040-R36M PJ33 *OPEN_8mm
33 SW1A
SW1A 1 2 25A 1 2
.c
PC121 PC120 PJ34 *OPEN_8mm
PQ25 PQ27 + 1 2
C
LG1A *MDU1512 MDU1512 2200p_50V_X7R_04 390uF_2.5V_10m_6.3* 6

33 LG1A
D
PD15
G G PR144
CSOD140SH
S
2_06 PR45
CSREFA 33
10_04
w
PR46 *10mil_short_04 SWN1A 33

w
w
POWER VCORE2 B - 35
Schematic Diagrams
AC IN, CHARGER
m
PC173
PR87 *20mil_04
VA
0.01u_50V_X7R_04
PR88 470K_04
PQ19
4
VIN V_BAT
o
MEP4435Q8
1 5
2 6
3 7
8
J_DC_JACK1 ¾aªñJBATTA1
JDD-52048AS1F- 165 PL1 VA PQ18 8.2UH_7.3*6.6*2.8MM
.c
HCB4532K-800_18 MEP4435Q8 PQ20A
PC1 8 PR76 EMB17A03V PL5 PR3
1 7 3 0.01_1%_32 6 TMPB0603M-8R2MN-Z01 0.01_1%_32
2 6 2 5 3
0.1u_50V_Y5V_06
GND1
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
4.7u_25V_X5R_08
5 1 10
10_06
10_06
10_06
10_06
0.1u_50V_Y5V_06
GND2 PR1
3
7
8
9
4.7u_25V_X5R_08
*10K_06
*10K_04 PR101
4
5.1_06
PR78 PR91
*20mil_short_04
100K_04 2
PR80
PC11
PC83
PC12
PC84
PC13 PQ20B PC86
PR77
PR4
PR2
EMB17A03V PC77
PC69
PR184
2200p_50V_X7R_04
PC62
PC7
PC64
A
PC5
PC6
x
PD1 PR79 0.047u_10V_X7R_04 0.047u_10V_X7R_04
RB0540S2 15K_04 PC72
0.1u_50V_Y 5V_06
LX_CHG 14 13
C
LX HDR
Sheet 35 of 38 LDR
BST_
16
12
LDR ICHP
5
4
ICHP
ICHM
PC20 *0.01u_50V_X7R_04
BSTOZ8681-E
fi
ICHM 28 BAT_DET
AC IN, CHARGER
PR99
VAC 1 11 V_BAT
VAC SDA PL2 *10mil_short_04 6
10_06 C A VDDP 15 10 SMC_BAT PL4 *10mil_short_04 5
VDDP SCL SMD_BAT PL3 *10mil_short_04 4
PD6 MDL914S2 IACM 3 7 IAC1 S8254CTL 3
IACM IAC 2
D
IACP 2 8 COMP PC3 1
PQ1 IACP COMP PC4 PC2 JBATTA1
G PR7 AC AV 9 6
BASE
MTN7002ZHS3 100K_04 BTD-06RC1B
ACAV VDDA
*30p_50V_NPO_04
*30p_50V_NPO_04
*30p_50V_NPO_04
a
S
PR89
PR5 PR6 PU1 *20mil_04
17
PR13
0_04 *0_04 *15mil_short_06
PR8 PC68 PC87 PC89 PC85 PR82 *20mil_04
SMC_BAT_R 28
*1u_25V_08 *1u_25V_08 1u_25V_Y 5V_08
100K_04
AC_IN
1000P_50V_X7R_04
PR83 *20mil_04
SMD_BAT_R 28
PC71
28 PMOSFET_ CONTROL# PR9
in
TOTAL_CUR 28
0.47u_10V_Y5V_04
PC73 100_04 PC88
C297 47P_50V_NPO_04
1u_10V_Y 5V_06 1u_10V_Y 5V_06
PR10 24K_1%_04
VDD3
PR85 10K_04
PR84 1.5K_04
PR81 1.5K_04
C VDD3
SMC_BAT AC
PD4 A
SMD_BAT
*BAV99N3
AC
PD3
C
A
h PR30
10K_04
22,29 M_BTN#
C
*BAV99N3
C PD7
BAT_DET AC AC_IN# 28
MDL914S2
PD2 A
C
*BAV99N3 PD5 VDD3
.c
A
C A B PQ5 6-53-3050B-042
VA DTC114EUA
PR28
ZD5245BS2 POWER BUTTON S8254CTL
PR25
D
10K_04
E
SW3 10K_04
*TJG-532-V-T/R PQ2
1 2 PWR_RESET# G
MTN7002ZHS3
3 4 PR20
S
*10K_04
PR23 PC21
5
6
PQ4 PR37 100K_04 PC170
MTP3403N3 300K_1%_04 AC_IN *0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04
V_BAT S D
BAT_VOLT 28
w
PR21 PR38 PC29

G
100K_1%_04 60.4K_1%_04 0.1u_16V_Y5V_04

D
G PQ3
VDD3
MTN7002ZHS3
w S
w
B - 36 AC IN, CHARGER
Schematic Diagrams
AUDIO BOARD
m
USB PORT A_USBVCC
AC3 AC2
60 mil
22u_6.3V_X5R_08
22u_6.3V_X5R_08
AC4
o
0.1u_10V_X5R_04
AJ_USB1
AGND 1
V+
AUSB_PN1 4 AL6 3 AUSB_PN1_R 2
.c
DATA_L
AUSB_PP1 1 2 AUSB_PP1_R 3
*WCM2012F2S-SHORT DATA_H
GND1
GND2
GND3
GND4
4
GND
US04036BCA081
GND2
GND1
GND3
GND4
6-21-B49C0-104
6-21-B49B0-104
AGND
x
TO M/B AUDIO JACK
Sheet 36 of 38
fi
AMIC_SENSE
AMIC1-R AL1 FCM1005KF-121T03
5 AJ_MIC1
4
3 R
AUDIO BOARD
AMIC1-L AL2 FCM1005KF-121T03 2
A_USBVCC AJ_AUDIO1 6 L
1
AC6 AC5 2SJ-T351-S23
1
AMIC1-R 2 100p_50V_NPO_04 100p_50V_NPO_04
3 MIC IN 6-20-B2800-106
AMIC1-L
a
4
AHEADPHONE-R 5
6
BLACK
AHEADPHONE-L
AMIC_SENSE 7 A_AUDG
AHP_SENSE 8 AHP_SENSE
AUSB_PN1 9 ASPK_HP# 5 AJ_HP1
AUSB_PP1 10 4
11 AHEADPHONE-R AR2 68_04 AL3 FCM1005KF-121T03 3 R
ASPKOUTR+ 12
in
ASPKOUTR- 13 AHEADPHONE-L AR3 68_04 AL4 FCM1005KF-121T03 2
14 6 L
50578-0140N-001 1
A_AUDG AGND PCB Footprint = 85201-14X5_L AR4 AR1 AC8 AC7 2SJ-T351-S23
*1K_04 *1K_04 100p_50V_NPO_04 100p_50V_NPO_04 HEADPHONE 6-20-B2800-106

BLACK
A_AUDG
AC9
AC11
AC1
AC10
0.1u_10V_X5R_04
*0.1u_10V_X5R_04
*0.1u_10V_X5R_04
*0.1u_10V_X5R_04
h ASPKOUTR+
ASPKOUTR-
AR5
AR6
*15mil_short_06
AC13
*1000p_50V_X7R_04 ASPKOUTR+_R
ASPKOUTR-_R
AJ_SPKR1
1
.c
2 J_SPK1
2 1
*15mil_short_06 50271-0020N-001
AC14 AC12
AGND A_AUDG *180p_50V_NPO_04 *180p_50V_NPO_04
Close to AJ_AUDIO1 A_AUDG
AH6 AH4 AH3

O6X4_5B3X1_5D3X1_5 C71D71 C217D110 AH2
w
2 9
3 8
4 1 7
5 6
MTH8_0D2_8
AGND AGND
AGND
w
w
AUDIO BOARD B - 37
Schematic Diagrams
POWER SW BOARD
m
POWER SW & LED
o
S_3.3VS
POWER
.c
SWITCH
SR1
LED
330_04
20mil
Z4301
x
SC2
A
*0.1u_10V_X5R_04
SJ_SW1
Sheet 37 of 38 1
2
SMGND
SMGND
fi
SM_BTN# SD2
POWER SW 3
4 S_3.3VS HT-150BP
C
20mil
BOARD 50578-0040N-001 6-52-57001-022
6-52-57301-021
SMGND
a
in
S_3.3VS
SMH1 6-53-3050B-042
2 9 SD1
3 8
POWER BUTTON
C
4 7
h 5
1
MTH6_0D2_2
SMGND
6
SMGND
1
3
SPWR_SW1
TJG-532-V-T/R
2
4
SM_BTN# AC
*BAV99 RECTIFIER
.c
5
6
SC1 SC3
A
0.1u_50V_Y 5V_06 *0.1u_50V_Y 5V_06
SMGND
w
SMGND SMGND
w
w
B - 38 POWER SW BOARD
Schematic Diagrams
Power On SEQ
m
POWER ON SEQUENCE
o
M_BTN#
M_BTN# 506ms DD_ON
DD_ON 70ms
.c
1.02ms 3.3V
3.3V
2.48ms 5V
5V
RSMRST#
RSMRST# 102ms PWR_BTN#
PWR_BTN# 52ms
202ms SUSC#
x
SUSC# 220ms
1.5V 1.88ms
Sheet 38 of 38
fi
1.5VS_CPU 1.88ms
Power On SEQ
SUSB# SUSB# 40us
5VS 5VS 2.36ms
a
1.5VS 1.5VS 1.88ms
3.3VS 3.3VS 2.12ms
1.05VS 1.05VS 1.28ms
in
VTT_MEM VTT_MEM 3.04ms
1.8VS 1.8VS 3.04ms
0.85VS 0.85VS 1.88ms
ALL_SYS_PWRGD
PM_PCH_PWROK
PM_DRAM_PWRGD
ALL_SYS_PWRGD 5.16ms
PM_PCH_PWROK
PM_DRAM_PWRGD
h
332ms
404ms
.c
H_CPUPWRGD H_CPUPWRGD 436ms
VCORE VCORE 436ms
DELAY_PWRGD DELAY_PWRGD 436ms
SYS_PWROK SYS_PWROK 436ms
w
S4_STATE# S4_STATE# 436ms

PLT_RST# PLT_RST# 436ms
VGFX_CORE VGFX_CORE 3.4s
w
w
Power On SEQ B - 39
B - 40
Schematic Diagrams
w
w
w
.c
h
in
a
fi
x
.c
o
m
BIOS Update
Appendix C:Updating the FLASH ROM BIOS 
m
BIOS Version
To update the FLASH ROM BIOS, you must: Make sure you down-
• Download the BIOS update from the web site. load the latest correct
o
• Unzip the files onto a bootable CD/DVD/USB Flash Drive. version of the BIOS ap-
propriate for the com-
• Reboot your computer from an external CD/DVD/USB Flash Drive. puter model you are
.c
• Use the flash tools to update the flash BIOS using the commands indicated below. working on.
• Restart the computer booting from the HDD and press F2 at startup enter the BIOS.
You should only
• Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer.
download BIOS ver-
x
• After rebooting the computer you may restart the computer again and make any required changes to the default BIOS sions that are
settings.
C:BIOS Update
V1.01.XX or higher as
appropriate for your
fi
Download the BIOS computer model.
1. Go to www.clevo.com.tw and point to E-Services and click E-Channel. Note that BIOS versions
a
2. Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files are not backward com-
(the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model patible and therefore
(see sidebar for important information on BIOS versions). you may not down-
in
grade your BIOS to an
older version after up-
Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive grading to a later ver-
1. Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the sion (e.g if you upgrade
downloaded files. h
2. Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB
a BIOS to ver 1.01.05,
you MAY NOT then go
back and flash the BIOS
.c
flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software). to ver 1.01.04).
Set the computer to boot from the external drive

w
1. With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the
computer and press F2 (in most cases) to enter the BIOS.
2. Use the arrow keys to highlight the Boot menu.
w
3. Use the “+” and “-” keys to move boot devices up and down the priority order.
4. Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS.
w
5. Press F4 to save any changes you have made and exit the BIOS to restart the computer.
C - 1
BIOS Update
Use the flash tools to update the BIOS

1. Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you
see the message “Starting MS-DOS”. You will then be prompted to give “Y” or “N” responses to the programs
m
being loaded by DOS. Choose “N” for any memory management programs.
2. You should now be at the DOS prompt e.g: DISK C:\> (C is the designated drive letter for the CD/DVD drive/USB
o
flash drive).
3. Type the following command at the DOS prompt:
.c
C:\> Flash.bat
4. The utility will then proceed to flash the BIOS.
5. You should then be prompted to press any key to restart the system or turn the power off, and then on again but
x
make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer
C:BIOS Update
restarts.
fi
Restart the computer (booting from the HDD)
1. With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from
a
the HDD.
2. Press F2 as the computer restarts to enter the BIOS.
in
3. Use the arrow keys to highlight the Exit menu.
4. Select Load Setup Defaults (or press F3) and select “Yes” to confirm the selection.
5. Press F4 to save any changes you have made and exit the BIOS to restart the computer.
h
Your computer is now running normally with the updated BIOS
.c
You may now enter the BIOS and make any changes you require to the default settings.
w
w
w
C-2

W54xCZ ESM

Uploaded by

Copyright:

Available Formats

W54xCZ ESM

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

W54xCZ ESM

Uploaded by

Copyright:

Available Formats

m

About this Manual

The following information is included:

IMPORTANT SAFETY INSTRUCTIONS

Instructions for Care and Operation

The computer has specific power requirements:

power cord). It is advis-

turning the machine

This will help prevent hard

PCH 8/9 POWER .........................................................................B-20

Top (W547CZ) ............................................................................... A-3 CCD, FAN, CLICK, P/W .............................................................B-23

Top (W549CZ) ............................................................................... A-5 LAN RTL8402, Card Reader ........................................................B-25

SATA ODD, LED ........................................................................ B-26

Updating the FLASH ROM BIOS......... C-1

Specifications Processor Options Pointing Device

Security (Kensington® Type) Lock Slot

LAN (802.11b/g/n) + Bluetooth 4.0

Note that the Touchpad and

is that indicated within the red

1 - 4 External Locator - Top View with LCD Panel Open

External Locator - Front & Right Side Views Figure 2

External Locator - Front & Right Side Views 1 - 5

External Locator - Left Side & Rear View

1 - 6 External Locator - Left Side & Rear View

External Locator - Bottom View

To prevent your com-

puter from overhea-

External Locator - Bottom View 1 - 7

Figure 7 Mainboard Overview - Top (Key Parts)

1 - 8 Mainboard Overview - Top (Key Parts)

Mainboard Overview - Bottom (Key Parts) Figure 8

Mainboard Overview - Bottom (Key Parts) 1 - 9

Figure 9 Mainboard Overview - Top (Connectors)

1 - 10 Mainboard Overview - Top (Connectors)

Mainboard Overview - Bottom (Connectors) Figure 10

Mainboard Overview - Bottom (Connectors) 1 - 11

the same way. The pin1 side is usually not indicated.

To remove the Optical Device: To remove the CCD Module:

To remove the Wireless LAN Module :

2. Remove the battery page 2 - 7

Removing the Optical (CD/DVD) Device Figure 1

Removing the Optical (CD/DVD) Device 2 - 5

2 - 6 Removing the Optical (CD/DVD) Device

Removing the Battery Figure 3

Removing the Battery 2 - 7

5. Remove screws 10 - 12 from the battery (Figure 4d).

i. Snap the sides to close e.

2 - 8 Removing the Battery

Removing the Hard Disk Drive

New HDD’s are blank. Before you

You have all the CD-ROMs and

1 h erating system and programs.

If you have access to the internet,

Removing the Hard Disk Drive 2 - 9

2 - 10 Removing the Hard Disk Drive

Removing the System Memory (RAM) Figure 7

Removing the System Memory (RAM) 2 - 11

4. Pull the latches to release the second module if necessary.

2 - 12 Removing the System Memory (RAM)

J40 VCC19 VCCIO18 AK50 22u_6.3V_X5R_08 22u_6.3V_X5R_08 22u_6.3V_X5R_08 *22u_6.3V_X5R_08 22u_6.3V_X5R_08

10u_6.3V_X5R_06 22u_6.3V_X5R_08 22u_6.3V_X5R_08 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04

10u_6.3V_X5R _08 1u_6.3V_X5R _04 1u_6.3V_X5R_04 1u_6.3V_X5R_04 1u_6.3V_X5R_04