Scribd
Upload
103 views2 pages

Chapter 4 PHYSICAL PROPERTIES OF MATERIALS

Uploaded by

Linwood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
103 views2 pages

Chapter 4 PHYSICAL PROPERTIES OF MATERIALS

Uploaded by

Linwood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Chapter 4 PHYSICAL PROPERTIES OF MATERIALS

Multiple Choice Quiz


There are 19 correct answers in this multiple choice quiz (some questions have multiple answers that are
correct). To achieve a perfect score on the quiz, all correct answers must be given. Each correct answer is
worth 1 point. Each omitted answer or wrong answer reduces the score by 1 point. Percentage score on the
quiz is based on the total number of correct answers.
4.1 The specific gravity of a material is the ratio of its density relative to the density of water: (a) true
4.2 Which one of the following metals has the lowest density: (d) magnesium,
4.3 The strength-to-weight ratio of a material is its yield strength divided by its density: (a) true or (b) false?
4.4 The coefficient of thermal expansion measures the change in volume of a material per degree of
temperature: (b) false?
4.5 The thermal expansion properties of polymers are generally (a) greater than,
4.6 In the heating of most metal alloys, melting begins at a certain temperature and concludes at a higher
temperature. In these cases, which of the following temperatures marks the beginning of melting: (b)
solidus?
4.7 Volumetric specific heat is best defined by which one of the following (d) specific heat multiplied by
density?
4.8 Which one of the following materials has the highest specific heat: (d) water?
4.9 The thermal diffusivity of a material is its thermal conductivity divided by its specific heat: (b) false?
4.10 Copper is generally considered easy to weld because of its high thermal conductivity: (b) false?
4.11 The mass diffusion rate dm/dt across a boundary between two different metals is a function of which of
the following variables (four best answers): (a) concentration gradient dc/dx, (b) contact area, (f)
temperature, and (g) time?
4.12 Ohm’s Law is expressed by which one of the following relationships: (a) current = voltage divided by
resistivity, (e) voltage = current multiplied by resistance?
4.13 The electrical conductivity of a material is the reciprocal of its resistivity: (a) true
© Mikell P. Groover 2012
Excerpts from this work may be reproduced by instructors for distribution on a not-for-profit basis for testing or instructional purposes only to students
enrolled in courses for which the textbook has been adopted. Any other reproduction or translation of this work beyond that permitted by Sections 107 or
108 of the 1976 United States Copyright Act without the permission of the copyright owner is unlawful.
4.14 Which of the following pure metals is the best conductor of electricity: (d) silver?
4.15 A superconductor is characterized by which one of the following: (d) zero resistivity?
4.16 In an electrolytic cell, the anode is the electrode that is (b) negative.

You might also like