Dry-type Transformer

High Reliability
Maintenance-free
Environmentally Friendly
Dry-type Transformer

Eaton Cooper Power Systems,a global

manufacturer, famous for its market leadership
and technical innovation, provides most safe
and reliable power transmission and distribution
to worldwide power utilities,industries and
enterprises,public institutions and homes.
We provides a wide range of forward-looking
products and solutions for Distributed Generation
Installations, Power Quality, Outage Management,
Distribution Automation, Environmental protection.
 
Products include transformer, regulator, capacitor,
MRPs, components, cutouts, disconnec, tors,
overhead switchgear, RMU, VCB, and smart grid
solutions, etc., which not only applied widely to
substation, outdoor overhead, underground, and
in-plant medium voltage distribution systems, but
also to railway, solar and wind field.
 
We are committed to constantly improving
electrical distribution for end-users to solve
problems, to achieve a more reliable and safer
power systems with better power quality. Your
success drives us to move forward continuously
and we listen to your sound for requirement.
 
CONTENTS
Features of Products....................................................... 01
Technical Specification.................................................... 02
Outline Drawings............................................................. 03
Technical Data................................................................ 04
Manufacturing................................................................. 05-08
Optional Accessories...................................................... 09-10
Quality Control................................................................ 11
Customer Reference List................................................ 12
 Dry-type Transformer

Features of Products

1 2
1. Lifting lug 3
2. LV terminal
4
3. Core

4. HV terminal
5
5. HV winding
6
6. Tapping terminal
7
7. LV windings

8. Base

Non-Flammable High Short-Circuit Strength

The insulating materials will not self-ignite and are self- Units are resistant to short-circuit forces.
extinguishing.
Hermetically Sealed
Efficient & Quiet Transformer are impervious to humidity and most common
Transformer have low losses and low sound level. industrial contaminants.

Environmentally Safe Low Installation Cost

Units are non-polluting and require little maintenance. Transformer can be installed close to the load center
without costly vaults, dikes and special ventilation.
Dielectric Integrity
Transformer are free of partial discharge and withstand Conserve Valuable Space
high Basic Impulse Levels. Designs are compact and light weight

1
Technical Specifications
■■ Voltage Range: Up to 35kV(including dual voltages)
■■ Capacity: 30 to 40000kVA(AN)
■■ Taps: ±2x2.5% are standard (other options available)
■■ Frequency: 50Hz or 60Hz
■■ Phases: Single or Three-Phase
■■ Vector Group: Dyn11, Yyn0 or others
■■ Cooling: AN or AF
■■ Insulation Class: F or H
■■ Insulation Level:
■■ Voltage 6/10kV 20kV 35kV
■■ P.F.test 35kV 50kV 70kV
■■ B.I.L.test 75kV 125kV 170kV
■■ Protection Enclosure Grade: IP00, IP20, IP23 or as
required
■■ Service Condition: Altitude, not exceeding 1000m.
Ambient temperature, not exceeding 40℃
■■ Standards:
■■ GB1094《Power Transformer》
■■ IEC60076《Power Transformer》
■■ Customizable according to special customer demands.

Models and Symbols

S C B 10 630 10
10kV
630kVA
Level 10
LV foil-type winding
Resin-insulated
dry-type transformer
Three-phase

S C B
High-voltage Level(kV)
Rated Capacity Level(kVA)
Code of performance level (Design code)
LV foil-type winding
Resin-insulated
dry-type transformer
Three-phase

2
 Dry-type Transformer

Technical Data
Voltage class 10kV, 30 up to 2500 kVA
Voltage Power Uk P0 Pk at Lwa Length Width Height Total Weight Roller
Model Class [kVA] [%] [W] 120°C[W] [(db(A)] [mm] [mm] [mm] [kg] distance
(kV) IP00/IP20 IP00/IP20 IP00/IP20 IP00/IP20 [mm]
SC10-30/10 30 4 190 710 50 900/1650 760/1450 1000/2000 380/680 550
SC10-50/10 50 4 270 1000 55 1000/1650 760/1450 1100/2000 560/860 550
SC10-63/10 63 4 320 1170 55 1100/1650 760/1450 1100/2000 600/900 550
SC10-80/10 80 4 370 1380 55 1100/1650 760/1450 1100/2000 690/990 550
SCB10-100/10 100 4 400 1570 55 1100/1650 760/1450 1150/2000 780/1080 550
SCB10-125/10 11 125 4 470 1850 55 1200/1650 760/1450 1200/2000 1010/1310 550
SCB10-160/10 10.5 160 4 540 2130 58 1200/1650 760/1450 1200/2000 1120/1420 660
SCB10-200/10 10 200 4 620 2530 58 1300/1650 760/1450 1200/2000 1360/1660 660
SCB10-250/10 6.3 250 4 720 2760 58 1350/1950 760/1600 1250/2000 1480/1830 660
SCB10-315/10 6 315 4 880 3470 60 1350/1950 760/1600 1250/2000 1550/1900 660
SCB10-400/10 400 4 980 3990 60 1350/1950 760/1600 1250/2000 1680/2030 660
SCB10-500/10 500 4 1160 4880 60 1350/1950 760/1600 1250/2000 1900/2250 660
SCB10-630/10 630 4 1340 5880 62 1600/2350 850/1650 1400/2000 2740/3240 660
SCB10-630/10 630 6 1300 5960 62 1600/2350 850/1650 1400/2000 2400/2900 660
SCB10-800/10 800 6 1520 6960 64 1600/2350 850/1650 1500/2000 2950/3450 820
SCB10-1000/10 1000 6 1770 8130 64 1700/2350 850/1650 1550/2000 3320/3820 820
SCB10-1250/10 1250 6 2090 9690 65 1700/2350 850/1650 1650/2000 3770/4270 820
SCB10-1600/10 1600 6 2450 11730 66 1900/2650 850/1850 1750/2500 4680/5230 820
SCB10-2000/10 2000 6 3050 14450 66 1950/2650 1200/1850 1800/2500 5430/5980 820
SCB10-2500/10 2500 6 3600 17170 68 2100/2650 1200/1850 1950/2500 6580/7130 1070

Voltage class 20kV, 315 up to 2500 kVA

Voltage Power Uk P0 Pk at Lwa Length Width Height Total Weight Roller
Model Class [kVA] [%] [W] 120°C[W] [(db(A)] [mm] [mm] [mm] [kg] distance
(kV) IP00/IP20 IP00/IP20 IP00/IP20 IP00/IP20 [mm]
SCB10-315/20 315 6 972 4085 60 1600/2350 850/1650 1500/2000 2060/2560 660
SCB10-400/20 400 6 1152 4845 60 1600/2350 850/1650 1500/2000 2210/2710 660
SCB10-500/20 500 6 1350 5795 60 1650/2350 850/1650 1550/2000 2620/3120 660
SCB10-630/20 630 6 1530 6840 62 1700/2350 850/1650 1600/2000 2720/3220 820
SCB10-800/20 800 6 1755 8265 62 1800/2350 1000/1650 1650/2000 3120/3620 820
SCB10-1000/20 20 1000 6 2070 9785 64 1800/2350 1000/1650 1850/2000 3600/4100 820
SCB10-1250/20 22 1250 6 2385 11543 64 2000/2650 1000/1850 1950/2500 4350/4900 820
SCB10-1600/20 1600 6 2790 13870 66 2100/2650 1000/1850 2000/2500 5650/6200 820
SCB10-2000/20 2000 6 3240 16388 66 2200/3000 1200/1850 2050/2500 6520/7210 1070
SCB10-2500/20 2500 6 3870 19380 68 2300/3000 1200/1850 2100/2500 7720/8410 1070
SCB10-2000/20 2000 8 3240 17860 66 2200/3000 1200/1850 2000/2500 6070/6760 1070
SCB10-2500/20 2500 8 3870 21280 68 2500/3000 1200/1850 2100/2500 8000/8690 1070

Voltage class 34.5kV, 315 up to 4000 kVA

Voltage Power Uk P0 Pk at Lwa Length Width Height Total Weight Roller
Model Class [kVA] [%] [W] 120°C[W] [(db(A)] [mm] [mm] [mm] [kg] distance
(kV) IP00/IP20 IP00/IP20 IP00/IP20 IP00/IP20 [mm]
SCB10-315/35 315 6 1179 4513 60 1800/2650 1000/1850 1800/2500 2370/2920 820
SCB10-400/35 400 6 1377 5415 60 1800/2650 1000/1850 1800/2500 2810/3360 820
SCB10-500/35 500 6 1620 6650 60 1900/2650 1000/1850 1850/2500 3410/3960 820
SCB10-630/35 630 6 1863 7695 62 1900/2650 1000/1850 1850/2500 3510/4060 820
SCB10-800/35 800 6 2160 9120 62 2000/2650 1000/1850 1950/2500 4480/5030 820
SCB10-1000/35 38.5 1000 6 2430 10450 64 2100/3000 1200/1850 2100/2500 5240/5930 820
SCB10-1250/35 35 1250 6 2835 12730 64 2200/3000 1200/1850 2200/2500 6220/6910 820
SCB10-1600/35 34.5 1600 6 3150 15485 66 2300/3000 1200/1850 2250/2500 7370/8060 1070
SCB10-2000/35 2000 6 3825 18240 66 2450/3200 1200/1850 2250/2500 8290/9110 1070
SCB10-2500/35 2500 6 4455 21850 68 2550/3200 1200/1850 2300/2500 9650/10470 1070
SCB10-3150/35 3150 6 11620 28090 70 2950/3900 1400/2150 2400/3000 11780/12780 1300
SCB10-4000/35 4000 6 12450 33840 70 3000/3900 1400/2150 2600/3000 12980/13980 1300

3
Outline drawings

REAR VIEW (LV SIDE) LEFT SIDE VIEW FRONT VIEW (HV SIDE)

IP20 Enclosure Dimensions

LV terminal Bus bar

HV terminal

4
 Dry-type Transformer

Manufacturing
CORE

The core is the heart of transformer.Through the

first-class equipment, advanced process and
high-quality material, our core is of high quality
to greatly reduce the no-load losses and noise
of transformer.

GEORG lamination cut-to-length line

We adopt the full-automatic silicon steel sheet

cutter of German GEORG Co. By controlling
through computer program, it has a high cutting
precision and no burr, and has the function of
multi-end feeding, automatic stacking collection
and step lap. It can reduce the number of
vibration at cutting, so that the crystal grain
structure is maintained with less variation of
finished silicon steel sheet.

GEORG stacking line

5
Manufacturing
CORE

Our core has an approximate circular section.

Silicon steel sheet is cut fully-oblique at 45°. The
joint between core column and yoke iron is of
step lap structure. These measures improve the
magnetic field distribution of core, and reduce
the consumption of materials and energy.
We also adopt the core inverting/lap/ assembling
table of German GEORG Co. It assembles the
core column and yoke iron into epsilon–shaped
core, and significantly improves the processing
quality and production efficiency of core.

GEORG stacking table

Magnetic flux distribution on the Magnetic flux distribution on the

connections with step-lap connections with traditional-lap

Step-lap core “E”core finished without upper yoke

6
 Dry-type Transformer

Manufacturing
WINDINGS

Computer-controlled HV automatic winding machines Eaton also produces LV copper-foil windings. The advantage
constant tension and automatic wire laying function were of foil winding is that the current density can distribute itself
imported from STOLLBERG, a German company. The freely along the width of the conductor and have strong short-
HV windings are made of copper electromagnetic wire circuit resistance. LV foil is closely through highly-purified
and insulated with fiberglass mats through segmented round-edge foil strip and insulating material pre-saturated in
cylindrical structure, and thus with a low voltage between epoxy resin. LV foil winding machine is the newest product
layers and strong over-voltage resistance. The winding of of STOLLBERG. Controlled by a computer module, the
larger capacity has a heat-radiating air passage to make a machine can maintain constant tension, wipe off any debur
good heat radiation. and rectify deviations automatically.

HV winding machine from Stollberg

LV foil winding from Stollberg

7
Manufacturing
CASTING

The winding is moved into the vacuum casting chamber cured in an oven to form strong solid coils under high
of epoxy resin vacuum casting equipment to dry after temperature.
preheating, the moisture/gas in the insulation are removed We adopt the casting equipment introduced from
in the vacuum casting procedure. Meanwhile, the imported HUBERS, a German company. It applies the patented
chemical materials (e.g. epoxy resin and hardener) are technologies (e.g. thin-film deaeration and static mixing).
continuously prepared in the separate vessels. After The static mixing technology is significantly superior to
the preparation process is finished, all of the materials dynamic one in the consistent physical/chemical property
are pumped into a static mixer at the ratio preset by the of material mixture (e.g. viscosity and chemical reaction
precise computer measuring system, and then cast into degree).
the molds. After the completion of casting, the coils are

Difference between static mixing technology&batch mixing

technology

Resin Vacuum Casting System from Hubers LV foil Windings HV Windings

8
 Dry-type Transformer

Optional Accessories
Steel-plate protective enclosure
The steel-plate enclosure is processed from
high-quality cold-rolled steel plate through three
numerical control equipment (i.e. numerical
control cutter, numerical control puncher
and numerical control plate bender). The
surface of enclosure panel is treated through
phosphorization and plastic spraying, and thus
possesses a very high corrosion resistance. The
steel-plate enclosure has various advantages
(e.g. beautiful exquisite appearance, good
ventilation, simple fast installation, and
convenient transportation). Its assembled
structure has a high mechanical strength. It can
be easily assembled on the scene, and there are
access door and ventilating hole in its front and
at its back. The color of steel-plate enclosure
is computer gray (RAL7032) or customizable
according to customer demand.

Aluminum-alloy protective enclosure

The aluminum-alloy enclosure is processed
mainly from aluminum-alloy polished plate. It
has a beautiful appearance and good corrosion
resistance. It can be easily assembled on the
scene, and there are access door in its front and
at its back.
The protective enclosure provides safety
shielding for charged position at a protective
class of IP20, IP23 and above. IP20 enclosure
can prevent the entry of solid impurities
of >12mm diameter; and IP23 enclosure
can additionally prevent the inflow of water
droplet within the range at a 60°angle to of
perpendicular line, and is applicable for outdoor
use.

9
Optional Accessories
Air-cooling system
The transformer can be cooled by two modes:
air natural cooling (AN) and air forced cooling
(AF). Forced-air AF output of the transformer is
up to 140% of the self-cooled rating, should be
used only for emergency non-recurring loads,
and but is not recommended for long-term
running.

Temperature Controller
The temperature is controlled by means of
sensor provided on each transformer. The
sensor (Pt100) are installed in the LV winding.
The digital controller shows the operating
temperature of each LV winding, sequentially.
The temperature controller performs the
following functions of three-phase winding
during transformer running: automatically switch
the cooling fans on at 100℃ and off at 80℃ , it
will send an over-temperature alarm at 130℃ ,
and will send emergency shutdown trip signal at
150℃ . and sensor fault alarm.

10
 Dry-type Transformer

Quality Control
Eaton Electric quality control was carried out
according to ISO9001 quality management
standard and production standard, there are
many quality engineers working for IQC, PQC,
FQC and OQC. All product should be inspected
and tested by operator, auditor and inspector
according to the production standards and
requirements before it been transported to the
next production process, the failed product will
be rejected. The product's quality and reliability
are ensured by our strict management procedure,
serious working attitude and advanced testing
equipments.
Transformer Inspection and Test Center

Impulse Test System Transformer Load Loss Test System Micro-ohm Meter WR50-12

Test Item Test Type Test Item Test Type

Winding resistance measurements Routine test Induced-voltage test Routine test

Ratio and phase-relation tests Routine test Partial discharge measurements Routine test
No-load loss and excitation current measurements Routine test Sound level measurements Type test
Load loss and impedance measurements Routine test Lightning impulse test Type test
Insulation resistance measurements Routine test Temperature rise test Type test
Applied-voltage test Routine test Short-circuit withstand test Special test

11
Customer Reference List

P&G Philippines CitibankPhilippines MTR HK

AES Philippines ZTE China Abbott Malaysia
Marriot Hotel Philippines Tencent China Goodyear Indonesia

12
Eaton is a power management company with 2015 sales of $20.9
billion. Eaton provides energy-efficient solutions that help our customers
effectively manage electrical, hydraulic and mechanical power more
efficiently, safely and sustainably. Eaton has approximately 97,000
employees and sells products to customers in more than 175 countries.
For more information, visit www.eaton.com.cn

Cooper Electronic Technologies (Shanghai) Co.,Ltd.

D2 Plant No.38 Dongsheng Road, East Area of
Zhangjiang High-Tech Park, Shanghai, China 201201 Eaton and Cooper Power Series
www.cooperpowersystems.com are registered trademarks.
www.eaton.com All other trademarks are property
B201-16022.January 2016.Rev01 of their respective owners.