Scribd Logo
Upload

Welcome to Scribd!

  • 191 views

    User'S Manual: (1) Product Control and Connector Locations

    Uploaded by

    P B
    This document provides instructions for using a Bluetooth stereo headphone with additional functions. It can be used as a Bluetooth headset, wired headphone, MP3 player and FM radio. Key features and controls are described, including how to power on/off, pair to devices, play music and radio, make/receive calls, and charge the device. Setup and use of the various modes are explained in 7 sections with clear steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    User'S Manual: (1) Product Control and Connector Locations

    Uploaded by

    P B
    191 views4 pages
    This document provides instructions for using a Bluetooth stereo headphone with additional functions. It can be used as a Bluetooth headset, wired headphone, MP3 player and FM radio. Key features and controls are described, including how to power on/off, pair to devices, play music and radio, make/receive calls, and charge the device. Setup and use of the various modes are explained in 7 sections with clear steps.

    Original Description:

    HEADPHONES

    Original Title

    LP-E06_manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for using a Bluetooth stereo headphone with additional functions. It can be used as a Bluetooth headset, wired headphone, MP3 player and FM radio. Key features and controls are described, including how to power on/off, pair to devices, play music and radio, make/receive calls, and charge the device. Setup and use of the various modes are explained in 7 sections with clear steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    191 views4 pages

    User'S Manual: (1) Product Control and Connector Locations

    Uploaded by

    P B
    This document provides instructions for using a Bluetooth stereo headphone with additional functions. It can be used as a Bluetooth headset, wired headphone, MP3 player and FM radio. Key features and controls are described, including how to power on/off, pair to devices, play music and radio, make/receive calls, and charge the device. Setup and use of the various modes are explained in 7 sections with clear steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    USER’S MANUAL

    Bluetooth v3 Stereo Multi-function Headphone


    with FM-Stereo Radio / Wired Headphone
    Microphone / MicroSD Slot / MP3 Player

    (1) Product Control and Connector Locations:

    1- LED indicator
    2- Multi-function button (power on / off, pairing, play / pause, auto
    search radio)

    3- Volume down (Long Press) / Last song (Short Press)


    4- Volume up (Long Press)/Next song (Short Press)

    5- MP3/FM

    6- answer/end calls, reject call, last number redial


    7- Micro SD/TF card slot
    8- Micro USB charging port
    9- Headset jack
    10- Microphone
    11- 3.5 stereo sound supply extension line (3ft, male to male)
    12- Micro-B USB charging cable

    (2) Powering the headset

    • Power On: Press the mult-ifunction button for 2-3 seconds until the blue
    indicator light flashes (the headset says: “The blue-tooth is ready to pair”).

    • Power Off: Press the multi-function button for 2-3 seconds until the blue
    indicator light goes off (the headset says: “The blue-tooth is powered off”).

    (3) Pair to your mobile phone or other products

    • Press the multi-function button for 2-3 seconds until the indicator light starts
    flashing red and blue alternatively (the headset says: “The blue-tooth is ready to
    pair”).

    • Turn on the blue-tooth function of your connecting smart phone (or other
    device).

    • Search for the blue-tooth devices and select ’LH-811’. (Enter the code ‘0000’ if
    prompted)

    • If paring is successful, the blue light indicator flashes (the headset says: “The
    blue-tooth is connected successfully”).

    • IMPORTANT: Please make sure the headphone is off before starting pairing
    process.

    • Headset will connect to the pre-set phone automatically when turned on (Please
    check to be sure the blue-tooth functionality of your phone is “on”)

    • If the pairing is not successful, please switch off headset first, and then attempt
    to re-pair
    (4) MP3 / FM

    • In power-on mode, insert the MicroSD TF card (not included), short-press the
    MP3/FM button, and the MP3’s will play automatically. Long-press the MP3/FM
    button for about 2-3 seconds to change to EQ mode (EQ: Natural / Pop / Rock /
    Jazz / Classic / Country / Heavy Bass). The blue light flashes slowly.
    If no MicroSD TF card is installed, short-press the MP3/FM button; the FM radio
    will then play automatically.

    • In power-on mode, short-press the MP3/FM button 2 times. FM radio will play
    automatically. Short-press the multi-function button to auto search all radio

    stations. Pause, then short-press or . The radio station will play, and

    the blue light flashes slowly.

    • If you are listening FM radio, short-press MP3/FM button; it will be change to


    blue-tooth mode and auto-connect your phone (or other device).

    (5) Answer/End calls, reject calls, last number redial (In


    blue-tooth mode)

    • When there is a call, short-press the button to answer the call. After the call,
    press the button to hang up. (If the other party hangs up first, no need press
    the button)

    • Reject call: long-press the button 2-3 seconds

    • Last number redial: short-press the button 2 times

    • When the phone call is answered, music will pause automatically and enter a
    “waiting state”. After call is finished, the music will resume playing
    automatically.

    (6) Charging the headset

    • Insert USB charging cable into the USB block. Connect the cable to a USB power
    supply that provides 5VDC power (charging block not included). Connect
    charging cable to the charging port of headset. When the red light is on, the
    headset is in charging. When the red light is off, the headset is fully charged. It
    takes 2 - 2.5 hours to fully charge the headset.
    • The battery is rechargeable. Low-power indicator: When the alert tone “beeps”
    and the indicator turns red, this indicates the battery has discharged and needs
    to be charged. First time charging: please be sure the battery has been fully
    charged before initial use.

    (7) Wired headphone function

    When blue-tooth connectivity is not available, connect one side of 3.5mm stereo
    sound supply extension line to headphone audio jack. Connect the other side to the
    audio jack of the playback device (such mobile phone, computer, ipad, MP3 players,
    etc). Playback will start from the device.

    You might also like