Scribd Logo
Upload

Welcome to Scribd!

  • 268 views

    PoE 25-100172-001

    Uploaded by

    Jossemar Cristhian Bartolo Onayram
    Equipo POE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PoE 25-100172-001

    Uploaded by

    Jossemar Cristhian Bartolo Onayram
    268 views2 pages
    Equipo POE

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Equipo POE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    268 views2 pages

    PoE 25-100172-001

    Uploaded by

    Jossemar Cristhian Bartolo Onayram
    Equipo POE

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SPEC SHEET

    SPEC SHEET

    Ethernet Power Injector


    25-100172-001 High-Power Injector
    This gigabit passive power injector supplies power to a
    BreadCrumb device over Ethernet cable. It accepts AC input from
    90V to 264V (47Hz to 63Hz), and outputs up to 50W at 48VDC. It
    supports Ethernet data speeds up to 1000 Mbps, offering excellent
    throughput for Ethernet traffic such as mesh-to-wired network communications
    unications
    as well as BC|Commander® and Automatic Protocol Tunneling (APT) control
    traffic. This device is not sealed for ingress of dust or water, therefore it must be
    used in indoor environments or outdoor NEMA enclosures.

    Power Injector Key Features Using the Power Injector to Your Benefit
    • Remotely power equipment through Category 5 or better The 25-100172-001 is a special Ethernet power
    Ethernet cable up to 100 m length
    injector offered through Rajant, which has a
    • Built-in Ethernet and AC surge protection regulated 48VDC output. Normally, higher power
    • Autoranging switching power supply injectors have an output voltage of 56V. This
    • Short circuit, over-current and over-voltage protection injector is regulated to 48VDC output to be
    • High-power, 50W, passive Ethernet power injector compatible with devices that are sensitive to the
    • Compatible with 10/100/1000 Mbps Ethernet data speeds higher voltages.
    • High bandwidth for data, voice, and video applications
    These are quality mid-span power sources for
    • Wide temperature range operation years of reliable operation even in the toughest
    • Compact size—floor, desktop, and wall mount conditions. They accept data-in to a shielded RJ45
    Jack and provide surge protected data-out and
    Power Injector Applications power on the shielded RJ45 output jack. They
    To power a Rajant LX5, ME4, KM3, or DX2 BreadCrumb, use work by supplying power to the remote device on
    one 25-100172-001 Ethernet power injector per Rajant Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec
    BreadCrumb as illustrated below in an indoor environment or supports distances up to 100m (328 feet).
    weatherproof enclosure. Consult your Breadcrumb User Guide to The units are auto-ranging and accept AC inputs
    ensure the BreadCrumb is a compatible model. from 90VAC to 264VAC (50/60 Hz). They supply
    regulated 48VDC 50W with load regulation within
    AC Input
    5%. They have various protections for surge, short
    circuit, overload and overvoltage.

    Data In
    To Ethernet switch
    or client device
    Data+Power
    Out

    Ethernet Power Injector Spec Sheet | 1


    SPEC SHEET

    DEVICE PINOUT RJ-45 Input (Data Only) RJ-45 Output (Data & Power)

    Pin Symbol Description Symbol Description

    1 BI_DA+ Data RX+ BI_DA+ Data RX(+)


    2 BI_DA- Data RX- BI_DA- Data RX(-)
    3 BI_DB+ Data TX+ BI_DB+ Data TX(+)
    4 BI_DC+ Data RX+ BI_DC+, Vo+ Data RX(+) , DC power(+)
    5 BI_DC Data RX- BI_DC-, Vo+ Data RX(-) , DC power(+)
    6 BI_DB- Data TX- BI_DB- Data TX(-)
    7 BI_DD+ Data RX+ BI_DD+, Vo- Data RX(+) , DC power(-)
    8 BI_DD- Data RX- BI_DD-, Vo- Data RX(-) , DC power(-)

    Ethernet Power Injector Specifications

    AC Input 90-264VAC 47-63Hz, IEC-320-C13 Socket

    DC Output 48VDC (4,5 V+) (7,8 V-), 1.04A 50W, Shielded RJ45

    Max Inrush Current (120VAC) 30A

    Efficiency (min) 85%

    Line / Load Regulation 1% / 5%

    Ripple / Noise 1% / 2%

    Protections Overvoltage, Short Circuit, Overcurrent

    Surge Protection Ethernet: 4 Pin (1/2,3/6) Common Mode Protection, 7.5V Clamping Voltage, 5.4A (8/20μs) Peak Pulse
    Current, <2pF Shunt Capacitance AC Input: Operating voltage = 385VDC, Clamping voltage = 775VDC,
    Maximum discharge current is 1200A (8/20us)

    EMC Standards FCC Class B EN55022 Class B

    Safety Standards UL1950, CSA 22.2 & TUV EN60950

    Environmental Standards RoHs

    MTBF 96,803 Hours

    Operating Temperature -30 to +60°C (-22 to +140°F)

    Operating Humidity (RH) 5% - 90%

    Storage Temperature -40 to +80°C (-40 to +176°F)

    Dimensions (Lx W x H) 125 x 75 x 38mm (4.9 x 3 x 1.5”)

    Weight 300g (10.6oz)

    Enclosure Plastic, unsealed

    Warranty 1 Year

    Tel: 484.595.0233 | www.rajant.com |


    Updated 12/2/2019
    BreadCrumb, InstaMesh, Kinetic Mesh, Living Network, and BC|Commander and their stylized logos are
    Ethernet Power Injector
    registered trademarks Spec Sheet
    of Rajant Corporation. All other trademarks are the property of their respective owners.
    If it’s moving, it’s Rajant. | 2
    © Copyright 2019 Rajant Corporation. All rights reserved.
    Industrial Wireless Networks Unleashed.

    You might also like