16.750 10000 Cameron Double Ram Bop Standard Bonnets Spec Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

16-3/4” 10,000 PSI CAMERON TU DOUBLE RAM BOP

BOP SPECIFICATION SHEET

16-3/4” 10,000 PSI CAMERON TYPE U DOUBLE RAM BOP STANDARD BONNETS
DESCRIPTION DATA UNITS BONNETS OPEN & UNLOCKED 220.00” INCHES
BONNETS CLOSED & UN-
MANUFACTURER CAMERON N/A 138.73” INCHES
LOCKED
PRESSURE RATING 10,000 PSI OPERATING DATA
VERTICAL BORE 16-3/4” INCHES GALLONS TO OPEN 12.0
HEIGHT 77.75” INCHES GALLONS TO CLOSE 12.9
APPROXIMATE WEIGHT 43,409 LBS. OPEN RATIO 2.9
BONNET BOLT LUBE MOLY (.07 COEF) CLOSE RATIO 6.8
BONNET BOLT TORQUE 23,000 FT-LBS
BONNET BOLT HEX ACROSS
4.625” INCHES
FLATS
HYDRAULIC OPERATING PRES-
1,500 PSI
SURE
MAX HYDRAULIC PRESSURE 3,000 PSI
OPEN/CLOSE PORT SIZE 1” INCHES
TOP CONNECTION FLANGED BX-162
BTM CONNECTION FLANGED BX-162
OUTLET SIZE 4-1/16”
OUTLET CONNECTION BX-155
LIFTING PLATE CAPACITY 100,000 LBS TOTAL

Fabritech MS, Inc. is an API 16A licensed facility that manufactures and remanufactures BOP’s. The above table is intended
for reference to Cameron (Schlumberger) BOP, and should be further consulted with the OEM of the equipment. It us the us-
er’s responsibility to ensure all equipment is in good working order prior to operation. Fabritech MS, Inc. is not responsible
for misuse of equipment, or any results that arise from the information on this sheet.

www.Fabritechms.com
[email protected]

You might also like