RAGHU INSTITUTE OF TECHNOLOGY

(Autonomous)
B.Tech. – III Year – II Semester
OBJECTIVE QUESTIONES

Name of the Subject :Digital Signal Processing

Subject code :18EC602
Branch : ECE

Q No Level Question A B C D E Answer

1 What is the process of converting a Sampling Normalizing Sampling rate None C
signal from a given rate to a different conversion
rate?
2 Which of the following methods are D/A convertor and Performing  None of the D/A D
used in sampling rate conversion of a A/D convertor entirely in mentioned convertor,
digital signal? digital domain A/D
convertor
&
Performing
entirely in
digital
domain
3 Which of the following is the Less signal distortion Quantization New sampling None of C
advantage of sampling rate conversion effects rate can be the
by converting the signal into analog arbitrarily mentioned
signal? selected
4 Which of the following is the Signal distortion Quantization New sampling Signal D
disadvantage of sampling rate effects rate can be distortion
conversion by converting the signal arbitrarily &
into analog signal? selected Quantizati
on effects
5 In which of the following, sampling Narrow band filters Digital filter Quadrature All D
rate conversion are used? banks mirror filters

6  Which of the following use quadrature Sub band coding Trans-  Sub band None of C
mirror filters? multiplexer coding & the
Trans- mentioned
multiplexer

7 If Fx and Fy are the sampling rates of D/I I/D I.D None of B

the input and output signals the
respectively, then what is the value of mentioned
Fy/Fx?
8 What is the process of reducing the Sampling rate Interpolation Decimation None C
sampling rate by a factor D? conversion

9  What is the process of increasing the Sampling rate Interpolation Decimation None B
sampling rate by a factor I? conversion

10 The Nyquist sampling rate is given by None A

Fs = 2 Fm Fs = 3 Fm Fs = 4 Fm

11  What is the folding frequency for the F/D F/4D F/2 F/2D D
aliased version of x(n) with sampling
rate F?
12 To what value should the bandwidth of F/D F/4D F/2D F/2 C
x(n) has to be reduced in order to avoid
aliasing?
13 Which process has a block diagram as Sampling rate Interpolation Decimation None C
 shown in the figure below? conversion

14 Which of the following is true about  Linear Time variant None of the Linear and D
the filtering operation on x(n)? mentioned time
invariant
15 Which of the following gives the v(mD) p(mD) v(mD).p(mD) None C
equation for y(m)?

16 Telegraph signals are examples of Pulse Train Digital Analog Impulse B

17 The effects caused due to finite word 1, 2 and 3 are correct 1 and 3 are 1 and 4 are All the D
lengths are correct correct four are
1) Coefficient quantization error correct
2) Adder overflow limit cycle
3) Round off noise
4) Limit cycles
18 How is the sampling rate conversion By increase in the  By filtering By decimation All of the D
achieved by factor I/D? sampling rate with (I) the sequence of filtered above
to remove signal with
unwanted factor D
images of
spectra of
original signal
19  The systems that employ multiple Dual DSP sysyems multi-rate DSP Mno DSP None B
sampling rates are called systems. systems
20 We will get aliased version of x(n) by D F Both D& F None A
down sampling

21  If x(n) produces y(m), then x(n-n0) True False Can’t say None B
does imply y(n-n0) for any value of n0.

22  The linear filtering operation followed True False Can’t say None A
by down sampling on x(n) is not time
invariant.
23 We need not relate the spectrum of True False Can’t say None B
y(m) to spectrum of x(n) to obtain
frequency response characteristic of
y(m).
24 The sequence v¯(n) can be obtained by True False Can’t say None A
multiplying v(n) with a signal p(n) of
period D.
25 The filter eliminates the spectrum of True False Can’t say None A
X(ω) in the range π/D < ω < π.

26  Superposition of signals in a linear Output that is product Output that is Output that is Output that B
system refers to the of all the signals sum of all the of highest is of
signals amplitude of largest
all the signals spectrum
of all the
signals
27  The nonlinear difference equations are Iterative method  Cobweb model Phase diagram Power C
solved using series
method
28  The effects caused due to finite word 1, 2 and 3 are correct All the four 1 and 4 are 1 and 3 are B
 lengths are are correct correct correct
1) Coefficient quantization error
2) Adder overflow limit cycle
3) Round off noise
4) Limit cycles
29 The error in the filter output that results Coefficient Limit cycles Adder Round off D
from rounding or truncating quantization error overflow limit noise
calculations within the filter is called cycle
30  In Gibb's phenomenon, the ringing bandgap  bandedge bandwidth bandshell B
effect is predominantly present near the
______ .