Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    1.3 - SECONDARY BUFFER TANK 12 MT-Model

    Uploaded by

    Rajaram
    This document contains specifications for the nozzles on a secondary oil buffer vessel. It lists 11 nozzles with information about their service, nominal bore, schedule/thickness, flange standards, type, class, and projection. It provides notes on nozzle orientation, insulation, surface treatment, testing, stiffeners, and bolt hole placement. The scope of work involves designing, engineering, fabricating, inspecting, testing, and assisting with commissioning the 12 MT capacity vessel including its skid, per the data sheet. The vendor must provide a performance guarantee for the unit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1.3 - SECONDARY BUFFER TANK 12 MT-Model

    Uploaded by

    Rajaram
    38 views1 page
    This document contains specifications for the nozzles on a secondary oil buffer vessel. It lists 11 nozzles with information about their service, nominal bore, schedule/thickness, flange standards, type, class, and projection. It provides notes on nozzle orientation, insulation, surface treatment, testing, stiffeners, and bolt hole placement. The scope of work involves designing, engineering, fabricating, inspecting, testing, and assisting with commissioning the 12 MT capacity vessel including its skid, per the data sheet. The vendor must provide a performance guarantee for the unit.

    Original Title

    1.3_SECONDARY BUFFER TANK 12 MT-Model

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains specifications for the nozzles on a secondary oil buffer vessel. It lists 11 nozzles with information about their service, nominal bore, schedule/thickness, flange standards, type, class, and projection. It provides notes on nozzle orientation, insulation, surface treatment, testing, stiffeners, and bolt hole placement. The scope of work involves designing, engineering, fabricating, inspecting, testing, and assisting with commissioning the 12 MT capacity vessel including its skid, per the data sheet. The vendor must provide a performance guarantee for the unit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views1 page

    1.3 - SECONDARY BUFFER TANK 12 MT-Model

    Uploaded by

    Rajaram
    This document contains specifications for the nozzles on a secondary oil buffer vessel. It lists 11 nozzles with information about their service, nominal bore, schedule/thickness, flange standards, type, class, and projection. It provides notes on nozzle orientation, insulation, surface treatment, testing, stiffeners, and bolt hole placement. The scope of work involves designing, engineering, fabricating, inspecting, testing, and assisting with commissioning the 12 MT capacity vessel including its skid, per the data sheet. The vendor must provide a performance guarantee for the unit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PRODUCED BY AN AUTODESK STUDENT VERSION

    NOZZLE NOM. SCH./ FLANGES NOZZLES


    SERVICE REMARKS
    NO. BORE THK. STD. TYPE CLASS REINF. PROJ.
    N1 TEMP. INDI. TRANSMITER 40 SCH.40 B16.5 WNRF 150# --- 200
    N2 TEMP. INDI. TRANSMITER 40 SCH.40 B16.5 WNRF 150# --- 200
    N3 PRE. INDI. TRANSMITER 40 SCH.40 B16.5 WNRF 150# --- 200
    N4 HOT OIL RETURN 80 SCH.40 B16.5 WNRF 150# --- 200
    N5 PSV 40 SCH.40 B16.5 WNRF 150# --- 200
    N6 PI 40 SCH.40 B16.5 WNRF 150# --- 200
    N7 VENT 25 SCH.40 B16.5 WNRF 150# --- 200
    N8 HOT OIL SUPPLY 80 SCH.40 B16.5 WNRF 150# --- 200
    N9 DRAIN 80 SCH.40 B16.5 WNRF 150# --- 200 WITH BLIND FLANGE
    N10 INLET 200 SCH.40 B16.5 WNRF 150# --- 200
    N11 OUTLET 100 SCH.40 B16.5 WNRF 150# --- 200

    NOTES:

    PRODUCED BY AN AUTODESK STUDENT VERSION


    ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED
    PRODUCED BY AN AUTODESK STUDENT VERSION

    1. FOR NOZZLE ORIENTATION REFER SHEET NO.**** (HOLD)


    2. INSULATION CLEATS, LIFTING LUGS, EARTHING BOSSES AND NAME PLATE TO BE PROVIDED. INSULATION CLEATS
    (RING TYPE) TO BE SUPPLIED LOOSE.
    3. SURFACE TREATMENT (EXTERNAL): BLAST CLEANING OF SURFACE TO SA 2.5 FINISH. 2 COATS OF INORGANIC
    ZINC SILICATE PRIMER (2 X 75 MIC DFT) FOLLOWED BY 2 COATS OF ALUMINUM (SILICON BASED, HEAT RESISTANT)
    PAINT (2 X 50 MIC DFT) - FOR ALL EXTERNAL UN MACHINED CARBON STEEL SURFACES/ PARTS .
    4. PHYSICAL & CHEMICAL TEST TO BE CONDUCTED FOR PLATE AS PER ASME CODE.
    5. NOZZLES 50NB AND BELOW SHALL BE PROVIDED WITH 2 STIFFENERS PLATE SIZE 50W X 6THK AT 90 DEGREE
    APART.80NB &ABOVE NOZZLES TO BE PROVIDED WITH R.F. PAD.
    6. ALL BOLT HOLES TO STRADDLE PRINCIPAL CENTRE LINE OF EQUIPMENT.
    ISMB200 (*)
    ISMB200 (*)

    SCOPE OF WORK :

    1. DESIGN, ENGINEERING, PREPARATION & SUBMISSION OF DESIGN CALCULATIONS, FABRICATION DRAWINGS,


    QUALITY ASSURANCE PLANS FOR APPROVAL, FABRICATION AS PER APPROVED DRAWINGS, OFFERING THE
    SAME FOR INSPECTION & SHOP TESTING, SURFACE PREPARATION & PAINTING, SUPPLY AND ASSISTANCE
    IN COMMISSIONING,CALIBRATION OF SECONDARY OIL BUFFER VESSEL OF 12 MT CAPACITY COMPLETE WITH
    SKID GENERALLY AS PER THIS DATA SHEET.
    2. VENDOR TO PROVIDE PERFORMANCE GUARANTEE FOR THE UNIT.

    DESIGN LOAD FOR SUPPORTS


    STATIC LOAD * VTS
    DYNAMIC LOAD * VTS

    PRODUCED BY AN AUTODESK STUDENT VERSION

    You might also like