Slot 2 LED Type:

Recessed Linear
TM

Slot 2 LED takes both form and function a step further Project:
with increased efficacy and integral controls creating a
digitally addressable luminaire that is perfect where visually
harmonious illumination and energy efficiency are desired.
Flush
Catalog Number:
TM
Slot 2 LED is the ideal choice for spaces that emphasize
DO NOT TYPE HERE. Autopopulated field.
Regressed lines and clean contemporary design. It is a perfect fit for
Armstrong TechZone™ ceiling systems. A regressed lens
option provides added dimension to the sleek, slender
design and the flush lens now has a Wet Label option.

Specification Features (continued on page 2) Technical Drawing

Housing Shielding
Nominal 2” x 2’, 3’, 4’, 5’, 6’, 7', 8’ and continuous Flush Lens: Snap-in 90% transmissive satin acrylic
rows in 1" increments as standard, upper housing lens.
fabricated from cold-rolled steel with extruded Regressed Lens: Lay-in 90% transmissive satin acrylic
aluminum ceiling trim. lens.
Finish Mounting
Painted high reflectance matte white powder coat. Recessed. Available for sheetrock, 9/16” slot grid or
Reflector 15/16” inverted tee ceilings, or 9/16” inverted tee.
Precision-formed steel; high reflectance matte white
powder coat; 93% reflectivity.
Fixture Performance - SL2L*
Lumens Output 400 LMF 600 LMF** 800LMF** 1000LMF
Fixture Style RLP FLP RLP FLP RLP FLP RLP FLP
Delivered Lumens/FT 234 308 404 533 534 705 654 862 Flush - (FLP)
Input Watts/FT 4 4 6 6 8 8 11 11
Lumen/Watt 68 89 69 91 67 88 62 82
* CCT (35K)
* Consult factory for customized lumen output and wattage
**Based on calculated values

A+ Capable options indicated

by this color background.

Ordering Example: SL2L LOP 4FT FLP FL 80CRI 30K 600LMF DARK 277 EMG NLIGHT WL

Series Linear Length Plan Total Run Length Fixture Style Ceiling Trim
SL2L Slot 2 LED Linear Recessed LOP Linear Optimized Plan 2FT 2' 7FT 7’ RLP1 Regressed Lens FL4 5/8” Flange(sheetrock)
3FT 3' 8FT 8' FLP2,3 Flush Lens TG 9/16” or 15/16" Flat or Inverted Tee
4FT 4' __FT__ *Specify continuous linear feet in GB4 Trimless (sheetrock)
5FT 5’ 1" increments (7FT6 = 7FT 6IN)
WFL 5
Perimeter Mount, 5/8" Flange (Sheetrock)
6FT 6' WTG5 9/16" Flat or Inverted Tee, Perimeter Mount

Direct Light Source Color

Rendering Direct LED Color Temp Direct LED Light Output Direct Distribution Minimum Dimming Level Voltage
80CRI 80 CRI 30K 3000K 400LMF 400 Lumens per FT (blank) Standard Distribution NODIM Non - Dim 120 120V
90CRI 90 CRI 35K 3500K 600LMF 600 Lumens per FT WW Wall Wash6 MIN1 Constant current, dimming to 1% 277 277V

800LMF 800 Lumens per FT DARK Constant current, dimming to 0.1%

40K 4000K
1000LMF 1000 Lumens per FT

Emergency Options Control Input Primary Sensor 9 Options

(blank) No Emergency (blank) Non-dim 8 (blank) No Sensor CP Chicago Plenum
E10W7 4ft Emergency Section with battery pack ZT 0-10V PDT Occupancy Sensor- Dual Technology USPOM US point of assembly
NLIGHT nLight enabled (Passive Infrared & Microphonics) WL3,10 Wet Location Listing
__E10W7 Number of 4ft Emergency Section(s) with
battery pack ECO7 Lutron EcoSystem ADC Daylight dimming sensor DPL Damp Location Listing
EMG Emergency Generator Power interface module
API PIR Occupancy Sensor & Photocell

APD PDT Occupancy Sensor & Photocell

See Notes next page.

marklighting.com  |  888-834-5684  |  ©2013-2018 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right
to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.

Page 1 SLOT 2 LED RECESSED LINEAR 05/30/18

MARK Slot 2 LED
ARCHITECTURAL Recessed Linear
LIGHTING
TM

Specification Features (continued) Notes

1. Supplied with lift and shift lay-in lens.
2. Supplied with snap-in lens.
3. Wet Location Label available with Flush and Wall Wash Lens only.
4. Not intended for post sheetrock installation.
5. Layout drawings are required for order.
6. Wall wash not available with RLP lens option.
LED Components 7. Remote mounted.
Linear: Nichia® - 757 Series LED chips (available in 80 or 90 CRI) 8. Only available with NODIM option
9. Sensors not available with WW, NODIM driver, WL or RLP option.
10. Cannot be installed in vertical surfaces.
LED Life
Rated 65,000 hours (L80) at 25 °C ambient temperature.

Color Consistency Optics

The Acuity Brands circuit boards for the linear LED components use a Slot LED’s patent-pending, precision lumen DIRECTIR optics condition and
precise binning algorithm which creates a consistent color temperature refract light to deliver accurately controlled, striation-free, and uniform
from board to board. Color variation is no greater than a 2.5 Step white light. All lumen DIRECTIR optics are injection-molded, optical grade,
MacAdam (2.5SDCM) along the black body locus from board to board. UV-resistant acrylic with selective finishing/polishing treatment.

Driver
eldoLED constant current driver options delivers ultra-smooth dimming
resolution from 100% to 0.1%, while assuring flicker free, low current
inrush, 89% efficiency and low EMI.

Integrated Controls
Optional nLight® embedded controls make luminaire addressable-
allowing it to digitally communicate with other nLight enabled controls
such as dimmers, switches, occupancy sensors and photocontrols.
Simply connect all the nLight enabled control devices using standard
CAT5 Cabling. (Input option: NLIGHT)

Occupancy Sensor (PDT) and/or Photocell (ADC)

A+ Capable Luminaire
This item is an A+ capable luminaire, which has been designed and
tested to provide consistent color appearance and out-of-the-box
control compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’
specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight®
control networks when ordered with drivers marked by a
shaded background* Optional Wall Wash (WW)
• This luminaire is part of an A+ Certified solution for nLight control
Certification
networks, providing advanced control functionality at the luminaire
CSA Certified to meet U.S. and Canadian standards.
level, when selection includes driver and control options marked by a
shaded background* Warranty
5-year limited warranty. Complete warranty terms located at:
To learn more about A+, visit www.acuitybrands.com/aplus.
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
*See ordering tree for details Note: Actual performance may differ as a result of end-user environment and
application.
All values are design or typical values, measured under laboratory conditions
at 25 °C.
Specifications subject to change without notice.

Photometry
For photometric information refer to www.marklighting.com.

marklighting.com  |  888-834-5684  |  ©2013-2018 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right
to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.

Page 2 SLOT 2 LED RECESSED LINEAR 05/30/18

MARK Slot 2 LED
ARCHITECTURAL Recessed Linear
LIGHTING
TM

Technical Drawing Ceiling Trim

FL GB
(Flanged sheetrock) (Flangeless sheetrock)

Flush - (FLP)

TG TG
(15/16” Grid) (9/16” Grid)

TG
Regressed - (RLP) (9/16” Slot Grid)

Remote Emergency Battery Mounting

SLOT FIXTURE HOUSING

VERTICALLY ADJUSTABLE
WIRING BOX FOR TEST
REMOTE
SWITCH WIRING
EMERGENCY BATTERY
PACK ENCLOSURE

GREENFIELD
(PROVIDED)

SINGLE GANG BOX

COVER WITH TEST
SWITCH/INDICATOR
LIGHT

Notes
• Delivers 700 lumens per 4FT length.
• Provided with 4FT of flexible conduit. Maximum of 25FT
remote distance if extended. Extension provided by others.

Mark Architectural Lighting

3 Kilmer Rd.
Edison, NJ 08817
cuity
T (732)985-2600
F (732) 985-8441
marklighting.com

marklighting.com  |  888-834-5684  |  ©2013-2018 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right
to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.

Page 3 SLOT 2 LED RECESSED LINEAR 05/30/18

MARK Slot 2 LED
ARCHITECTURAL Recessed Linear
LIGHTING
TM

nLight Air Wireless

To Make fixture NLTAIR2 compatible the following components are required:

1) rpp20 D
2) rPODB 2P DX

B B

J-BOX

B A

rPP20 D

B B

rPODB 2P DX

WIRING KEY
A B
Line Power Switched Line + Dimming

Continuous Runs
Slot 2 LED continuous rows can be configured in 1" increments.
Run Patterns, Corners and Junction
Slot 2 LED patterns be configured in 1’ increments with illuminated 90° inside and outside corners, T junctions, and X junctions with standard 2’ corner and
junction lengths. For custom angles, corner or junction lengths, consult factory.

90° Corner T Junction

X Junction Inside Corner Outside Corner

Layout Sketch
Please draw and configure your linear run below.

marklighting.com  |  888-834-5684  |  ©2013-2018 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right
to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.

Page 4 SLOT 2 LED RECESSED LINEAR 05/30/18