Technical Reference Guide: Product Overview

Technical Reference Guide
Product Overview
Describes features and general specifications for the product.
Setup
Describes setup and installation of the product and peripherals.
Application Development Information

Describes how to control the printer and necessary information
when you develop applications.
Handling
Describes how to handle the product.
Replacement of the TM-T88IV

Describes precautions for replacement.
Appendix
Describes interfaces, connectors, and character code tables.
M00024302
Rev. C
Downloaded from www.Manualslib.com manuals search engine

Cautions
• No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation.
• The contents of this document are subject to change without notice. Please contact us for the latest
information.
• While every precaution has been taken in the preparation of this document, Seiko Epson Corpora-
tion assumes no responsibility for errors or omissions.
• Neither is any liability assumed for damages resulting from the use of the information contained
herein.
• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating
and maintenance instructions.
• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of
any options or any consumable products other than those designated as Original EPSON Products or
EPSON Approved Products by Seiko Epson Corporation.
Trademarks
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation in Japan and other
countries/regions.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
ESC/POS® Command System

EPSON ESC/POS is a proprietary POS printer command system that includes patented or patent-
pending commands. ESC/POS is compatible with all types of EPSON POS printers and displays
(excluding the TM-C100 printer).
ESC/POS is designed to reduce the processing load on the host computer in POS environments. It
comprises a set of highly functional and efficient commands and also offers the flexibility to easily make
future upgrades.

For Safety
Key to Symbols
The symbols in this manual are identified by their level of importance, as defined below. Read
the following carefully before handling the product.
You must follow warnings carefully to avoid serious bodily injury.
WARNING
Provides information that must be observed to prevent damage to the equipment or loss of
data.
CAUTION • Possibility of sustaining physical injuries.
• Possibility of causing physical damage.
• Possibility of causing information loss.
Provides information that must be observed to avoid damage to your equipment or a

malfunction.
Provides important information and useful tips.

Warnings
• To avoid risk of electric shock, do not set up this product or handle cables during a
thunderstorm
WARNING • Never insert or disconnect the power plug with wet hands.
Doing so may result in severe shock.
• Handle the power cable with care.
Improper handling may lead to fire or electric shock.
∗ Do not modify or attempt to repair the cable.
∗ Do not place any heavy object on top of the cable.
∗ Avoid excessive bending, twisting, and pulling.
∗ Do not place the cable near heating equipment.
∗ Check that the plug is clean before plugging it in.
∗ Be sure to push the plug all the way in.
• Be sure to use the specified power source.
Connection to an improper power source may cause fire or shock.
• Do not place multiple loads on the power outlet.
Overloading the outlet may lead to fire.
• Shut down your equipment immediately if it produces smoke, a strange odor, or
unusual noise.
Continued use may lead to fire. Immediately unplug the equipment and contact your
dealer or a Seiko Epson service center for advice.
• Never attempt to repair this product yourself.
Improper repair work can be dangerous.
• Never disassemble or modify this product.
Tampering with this product may result in injury or fire.
• Do not allow foreign matter to fall into the equipment.
Penetration by foreign objects may lead to fire.
• If water or other liquid spills into this equipment, do not continue to use it.
Continued use may lead to fire. Unplug the power cord immediately and contact your
dealer or a Seiko Epson service center for advice.
• If you open the DIP switch cover, be sure to close the cover and tighten the screw
after adjusting the DIP switch.
Using this product with the cover open may cause fire or electric shock.

Cautions
• Do not connect cables in ways other than those mentioned in this manual.
Different connections may cause equipment damage or fire.
CAUTION • Be sure to set this equipment on a firm, stable, horizontal surface.
The product may break or cause injury if it falls.
• Do not use this product in locations subject to high humidity or dust levels.
Excessive humidity and dust may cause equipment damage or fire.
• Do not place heavy objects on top of this product. Never stand or lean on this
product.
Equipment may fall or collapse, causing breakage and possible injury.
• Take care not to injure your fingers on the manual cutter
∗ When you remove printed paper
∗ When you perform other operations such as loading/replacing roll paper
• Do not open the roll paper cover without taking the necessary precautions, as this
can result in injury from the autocutter fixed blade.
• Do not use aerosol sprayers containing flammable gas inside or around this
product.
Doing so may cause fire.
• To ensure safety, unplug this product before leaving it unused for an extended
period.
Restriction of Use
When this product is used for applications requiring high reliability/safety, such as
transportation devices related to aviation, rail, marine, automotive, etc.; disaster prevention
devices; various safety devices, etc.; or functional/precision devices, etc., you should use this
product only after giving consideration to including fail-safes and redundancies into your
design to maintain safety and total system reliability. Because this product was not intended for
use in applications requiring extremely high reliability/safety, such as aerospace equipment,
main communication equipment, nuclear power control equipment, or medical equipment
related to direct medical care, etc., please make your own judgment on this product's suitability
after a full evaluation.

About this Manual
Aim of the Manual

This manual provides developers/engineers with all the necessary information for design,
development and installation of a POS system, and also design and development of a printer
application.
Manual Content
The manual is made up of the following sections:
Chapter 1 Product Overview
Chapter 2 Setup
Chapter 3 Application Development Information
Chapter 4 Handling
Chapter 5 Replacement of the TM-T88IV
Appendix Specifications of Interfaces and Connectors

Character Code Tables

Contents
■ For Safety...............................................................................................................................3
Key to Symbols ....................................................................................................................................... 3
Warnings ................................................................................................................................................. 4
Cautions.................................................................................................................................................. 5
■ Restriction of Use ..................................................................................................................5
■ About this Manual ................................................................................................................6
Aim of the Manual................................................................................................................................. 6
Manual Content .................................................................................................................................... 6
■ Contents ................................................................................................................................7
Product Overview ........................................................................13

■ Features ...............................................................................................................................13
■ Product Configurations ......................................................................................................14
Interfaces .............................................................................................................................................. 14
Buzzer .................................................................................................................................................... 14
Colors .................................................................................................................................................... 15
Accessories........................................................................................................................................... 15
■ Part Names and Functions.................................................................................................16
Power Switch ........................................................................................................................................ 16
Power Switch Cover............................................................................................................................. 17
Control Panel ....................................................................................................................................... 17
Connectors........................................................................................................................................... 18
Offline .................................................................................................................................................... 19
■ Error Status ...........................................................................................................................20
Automatically Recoverable Errors ..................................................................................................... 20
Recoverable Errors............................................................................................................................... 20
Unrecoverable Errors ........................................................................................................................... 21
■ NV Memory (Non-Volatile Memory) ................................................................................22
NV Graphics Memory.......................................................................................................................... 22
User NV Memory .................................................................................................................................. 22
Memory Switches (Customized Value) ............................................................................................. 23
User-defined Page ............................................................................................................................... 23
Maintenance Counter ........................................................................................................................ 23
■ Product Specifications .......................................................................................................24
Printing Specifications ......................................................................................................................... 25
Character Specifications .................................................................................................................... 26
Printable Area ...................................................................................................................................... 27
Printing and Cutting Positions ............................................................................................................. 29
Paper Specifications............................................................................................................................ 30
Electrical Characteristics .................................................................................................................... 31
Environmental Conditions................................................................................................................... 32
External Dimensions and Mass ........................................................................................................... 33

■ Option Specifications ........................................................................................................ 34
Power Supply Unit (PS-180) ..................................................................................................................34
Setup .............................................................................................35
■ Flow of Setup....................................................................................................................... 35
■ Installing the Printer............................................................................................................ 36
Important Notes on Horizontal Installation ........................................................................................36
Important Notes on Wall Hanging......................................................................................................36
■ Changing the Paper Width................................................................................................ 37
■ Setting the DIP Switches..................................................................................................... 39
Setting Procedure.................................................................................................................................39
For Serial Interface................................................................................................................................40
For Parallel Interface ............................................................................................................................42
For Built-in USB Interface ......................................................................................................................43
For Ethernet/Wireless LAN/USB Interface ...........................................................................................44
Selecting the Print Density (DIP Switches 2-3/2-4)............................................................................. 45
Selecting the BUSY Status ....................................................................................................................46
■ Connecting the Power Supply Unit (PS-180) .................................................................... 47
Connecting the Power Supply Unit ....................................................................................................47
■ Setting the Memory Switches
(Customized Value)48
Functions ...............................................................................................................................................49
■ Adjusting the Paper Roll Near-End Sensor ....................................................................... 53
■ Connecting the Printer to the Host Computer ................................................................. 54
For Serial Interface................................................................................................................................54
For Parallel Interface ............................................................................................................................56
For USB Interface...................................................................................................................................57
For Ethernet Interface ..........................................................................................................................60
For Wireless LAN Interface ...................................................................................................................62
■ Connecting the Cash Drawer ........................................................................................... 63
Connecting the Drawer Kick-out Cable............................................................................................63
■ Setting the Internal Buzzer
(for Model with an Internal Buzzer)65
■ Connecting the Optional External Buzzer........................................................................ 66
Unpacking.............................................................................................................................................66
Installation Position ...............................................................................................................................67
Installation Procedures.........................................................................................................................68
Adjusting the Buzzer Volume ...............................................................................................................69
Setting the Optional External Buzzer ..................................................................................................69
■ Attaching the Connector Cover ....................................................................................... 70
■ Arranging the Cables ........................................................................................................ 72

Application Development Information......................................73
■ How to Control the Printer ..................................................................................................73
Selecting a Driver................................................................................................................................. 73
ESC/POS Commands .......................................................................................................................... 74
■ Software and Manuals .......................................................................................................79
Drivers.................................................................................................................................................... 79
Utilities.................................................................................................................................................... 81
How to Get Drivers, Manuals, and the Utility .................................................................................... 82
■ Setting/Checking Modes...................................................................................................83
Self-test Mode ...................................................................................................................................... 83
Hexadecimal Dumping Mode ........................................................................................................... 85
NV Graphics Print Mode ..................................................................................................................... 86
Receipt Enhancement Information Print Mode............................................................................... 87
Memory Switch Setting Mode............................................................................................................ 88
Handling .......................................................................................89
■ Installing and Replacing Roll Paper..................................................................................89
■ Removing Jammed Paper.................................................................................................91
■ Cleaning the Thermal Head ..............................................................................................93
■ Preparing for Transport .......................................................................................................94
Replacement of the TM-T88IV ....................................................95

■ Compatibility ......................................................................................................................95
Printing .................................................................................................................................................. 95
Print Density .......................................................................................................................................... 95
Two-Color Printing ................................................................................................................................ 95
Number of Head Energizing Parts ...................................................................................................... 95
Printable Area (for 80 mm Width Paper)........................................................................................... 96
Cutting Method ................................................................................................................................... 96
Manual Paper Feed ............................................................................................................................ 96
Receive Buffer ...................................................................................................................................... 96
Memory Capacity ............................................................................................................................... 96
Electrical Characteristics .................................................................................................................... 96
DIP Switches ......................................................................................................................................... 97
Printer Status ......................................................................................................................................... 97
Logo Registration ................................................................................................................................. 97
Driver Compatibility............................................................................................................................. 97
USB Low Power Consumption Mode ................................................................................................. 98
Maintenance Counter ........................................................................................................................ 98
Buzzer .................................................................................................................................................... 98
Power Supply Box ................................................................................................................................. 98
Overall Dimensions .............................................................................................................................. 99

■ Additional Functions and Functional Improvements.................................................... 100
Paper Width ........................................................................................................................................100
Print Speed ..........................................................................................................................................100
Barcodes .............................................................................................................................................100
Number of Characters.......................................................................................................................101
Image Tone Setting ............................................................................................................................101
Interface ..............................................................................................................................................101
USB Class..............................................................................................................................................101
Customized Value ..............................................................................................................................102
R/E Information Printing Mode ..........................................................................................................102
Low Power Load Mode......................................................................................................................103
Reliability .............................................................................................................................................103
Appendix ....................................................................................105
■ Specifications of Interfaces and Connectors................................................................ 105
RS-232 Serial Interface........................................................................................................................105
IEEE 1284 Parallel Interface................................................................................................................108
USB (Universal Serial Bus) Interface ...................................................................................................111
■ Character Code Tables ................................................................................................... 112
Common to All Pages........................................................................................................................112
Page 0 [PC437: USA, Standard Europe]...........................................................................................113
Page 1 (Katakana).............................................................................................................................114
Page 2 (PC850: Multilingual) .............................................................................................................115
Page 3 (PC860: Portuguese) .............................................................................................................116
Page 4 (PC863: Canadian-French)..................................................................................................117
Page 5 (PC865: Nordic) .....................................................................................................................118
Page 11 (PC851: Greek) ....................................................................................................................119
Page 12 (PC853: Turkish)....................................................................................................................120
Page 13 (PC857: Turkish)....................................................................................................................121
Page 14 (PC737: Greek) ....................................................................................................................122
Page 15 (ISO8859-7: Greek) ..............................................................................................................123
Page 16 (WPC1252) ...........................................................................................................................124
Page 17 (PC866: Cyrillic #2) ..............................................................................................................125
Page 18 (PC852: Latin2) ....................................................................................................................126
Page 19 (PC858: Euro) .......................................................................................................................127
Page 20 (KU42: Thai) ..........................................................................................................................128
Page 21 (TIS11: Thai)...........................................................................................................................129
Page 26 (TIS18: Thai)...........................................................................................................................130
Page 30 (TCVN-3: Vientamese) ........................................................................................................131
Page 31 (TCVN-3: Vientamese) ........................................................................................................132
Page 32 (PC720: Arabic) ...................................................................................................................133
Page 33 (WPC775: Baltic Rim) ..........................................................................................................134
Page 34 (PC855: Cylillic) ....................................................................................................................135
Page 35 (PC861: Icelandic) ..............................................................................................................136
Page 36 (PC862: Hebrew) .................................................................................................................137
Page 37 (PC864: Arabic) ...................................................................................................................138
Page 38 (PC869: Greek) ....................................................................................................................139
Page 39 (ISO8859-2: Latin2)...............................................................................................................140
10

Page 40 (ISO8859-15: Latin9) ............................................................................................................ 141
Page 41 (PC1098: Farci) .................................................................................................................... 142
Page 42 (PC1118: Lithuanian) .......................................................................................................... 143
Page 43 (PC1119: Lithuanian) .......................................................................................................... 144
Page 44 (PC1125: Ukranian)............................................................................................................. 145
Page 45 (WPC1250: Latin 2) ............................................................................................................. 146
Page 46 (WPC1251: Cyrillic) ............................................................................................................. 147
Page 47 (WPC1253: Greek) .............................................................................................................. 148
Page 48 (WPC1254: Turkish).............................................................................................................. 149
Page 49 (WPC1255: Hebrew) ........................................................................................................... 150
Page 50 (WPC1256: Arabic) ............................................................................................................. 151
Page 51 (WPC1257: Baltic Rim)........................................................................................................ 152
Page 52 (WPC1258: Vientamese).................................................................................................... 153
Page 53 (KZ1048: Kazakhstan) ......................................................................................................... 154
Page 255 (User-Defined Page) ......................................................................................................... 155
International Character Sets ............................................................................................................ 156
11

12

Product Overview
This chapter describes features and specifications of the product.
Features
Printing
• High speed printing (300 mm/s maximum).
• Shifting from 80 mm width paper printing to 58 mm width paper printing is available.
• Multi-tone graphic printing.
1
Handling
• Easy drop-in paper loading
Software
• Command protocol is based on the ESC/POS Proprietary Command System.
• OPOS ADK, OPOS ADK for .NET, JavaPOS ADK, and Windows printer drivers are available.
• In addition to supporting several kinds of bar code printing, DS1 DataBar printing and two-
dimensional symbol (PDF417, QR code, MaxiCode, Composite Symbology) printing are
possible.
• Various layouts are possible by using page mode.
• A maintenance counter function is supported.
• User-defined font function is supported.
• Paper-saving function is supported.
• Image tone can be changed.
• The remote configuration tool allows you to check the status of and configure the printer con-
nected to a computer on the network.
• The TM-T88V is ENERGY STAR qualified. (Some configurations may be exempted, depend-
ing on their components.)
13

Others
• Various interface boards (EPSON UB series*) can be used.
• Built-in USB interface is also available for all interface models.
• The TM-T88V Software & Documents Disc (drivers, utility, and manuals).
* Except the following interface boards with the buzzer function
∗ UB-E02A, UB-R02A, UB-R03A
Product Configurations
Interfaces
Built-in USB interface

Interface board (UB): (May be covered with a
Serial/Parallel/USB/ 㩷 plate for some models.)
Ethernet/Wireless LAN
• Serial UB + built-in USB interface model

• Parallel UB + built-in USB interface model
• USB UB
• Ethernet UB
• Wireless LAN UB
For this printer, never use a LAN interface board or a wireless LAN interface board
with a buzzer function.
CAUTION Otherwise, the printer or the interface board may be damaged.
The name of interface boards with a buzzer function has “A” at the end.
Example) UB-E**A, UB-R**A (*: alphanumeric character)
Buzzer
• Model with the internal buzzer function
• Optional external buzzer
The optional external buzzer and the internal buzzer cannot be used together at the same
time.
14

Colors
• ECW (Epson Cool White)
• EDG (Epson Dark Gray)
Accessories
Included
• Roll paper (for operation check)
• Power switch cover
• Connector cover
1
• Roll paper guide for 58 mm width paper*
• Two strips for the roll paper guide*
• Screw for the roll paper guide*
• The TM-T88V Software & Documents Disc (drivers, utilities, and documentation) *
• Warranty certificate*
• Setup Guide or User’s manual
* May not be included depending on the model.
Options
• AC adapter
• AC cable
• Power supply box (Model: OT-BX88V)
• Affixing tape for fixing the printer (Model: DF-10)
• Wall hanging bracket (Model: WH-10)
• Interface boards (UB series)
• Optional external buzzer (Model: OT-BZ20)
15

Part Names and Functions
Roll paper cover
Cutter cover
Control panel
Connector
cover
Cover open button
Power switch cover
Power switch
Power Switch
Turns the printer on or off. The marks on the switch: ( : OFF/ : ON)
Before turning on the printer, be sure to check that the AC adapter is connected to
the power supply.
CAUTION
Before turning the printer off, it is recommended to send a power-off command to the
printer. If you use the power-off sequence, the latest maintenance counter values are
saved. (Maintenance counter values are usually saved every two minutes.)
For detailed information about ESC/POS commands, see the ESC/POS Application
Programming Guide.
16

Power Switch Cover

Install the power switch cover that comes with the TM-T88V onto the printer to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance
of the printer.
To reset the printer when the power switch cover is installed, insert a long, thin object (such as
the end of a paper clip) into the hole in the power switch cover and press the power switch.
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
WARNING Continued use of the printer may cause fire or shock.
Control Panel
1
(Power) LED
Error LED
Paper LED
Feed button
LEDs
Power LED (green)
• Lights when the power supply is on.
• Goes out when the power supply is turned off.
Error LED
Lights or flashes when the printer is offline.
• Lights after the power is turned on or after a reset (offline). Automatically goes out after a
while to indicate that the printer is ready.
• Lights when the end of the roll paper is detected, and when printing has stopped (offline). If
this happens, replace the roll paper.
• Flashes when an error occurs. (For details about the flash codes, see "Error Status" on page 20.)
• Goes out during regular operation (online).
17

Paper LED
• Lights when there is no more roll paper or there is little remaining.
• Off when there is a sufficient amount of roll paper remaining.
• Flashes when a self-test is in progress.
Feed button
Pressing this button once feeds the roll paper by one line. Holding this button down feeds the
roll paper continuously.
Connectors
All cables are connected to the connector panel on the lower rear of the printer.
Serial interface
Parallel interface Power supply
Drawer kick-out
(DK)
USB interface (Built-in/UB)
USB Plus Power

Ethernet interface
• Drawer kick-out connector: Connects a cash drawer or the optional external buzzer.
• Interface connector: Connects the printer with the host computer interface.
• Power supply connector: Connects the power supply unit
The picture above shows a serial interface model. For details on the various interfaces and
how to connect the power supply connector and cash drawer, see "Connecting the Printer
to the Host Computer" on page 54 and "Connecting the Cash Drawer" on page 63.
18

Offline
The printer automatically goes offline under the following conditions:
• During power on (including resetting with the interface) until the printer is ready
• During the self-test
• While roll paper is fed using the Feed button.
• When the cover is open.
• When the printer stops printing due to a paper-end (if an empty paper supply is detected by
the roll paper end sensor or if the driver has been set to stop printing when a roll paper near-
end is detected)
• When an error has occurred
1
19

Error Status
There are three possible error types: automatically recoverable errors, recoverable errors, and
unrecoverable errors.
Automatically Recoverable Errors

Printing is no longer possible when automatically recoverable errors occur. They can be
recovered easily, as described below.
Error LED flash code

Error Error description Approx. Recovery measure
160 ms
Roll paper The roll paper cover Recovers automatically

cover open was opened during when the roll paper
error printing. cover is closed.
Print head A high temperature Recovers automatically

temperature outside the head drive when the print head
error operating range was cools.
detected.
Recoverable Errors
Printing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power on again or sending an error recovery command from the driver after
eliminating the cause of the error.

Error Error description Approx. Recovery measure
160 ms
Autocutter error Autocutter does not Remove the jammed

work correctly. paper or foreign matter
Approx.2.56 s in the printer, close the
roll paper cover, send
the error recovery
command, or turn the
power on to recover.
The error recovery command is valid only if a recoverable error (excluding automatically
recoverable errors) occurs.
20

Unrecoverable Errors
Printing is no longer possible when unrecoverable errors occur. The printer must be repaired.
Turn off the power immediately when unrecoverable errors occur.
CAUTION

Error Error description Approx.
160 ms
Memory R/W error After R/W checking, the printer does not
High voltage error

work correctly.
The power supply voltage is extremely

1
high.
Low voltage error The power supply voltage is extremely low.
CPU execution error The CPU is executing an incorrect address.
Internal circuit Internal circuits are not connected

connection error correctly.
Approx.2.56 s
21

NV Memory (Non-Volatile Memory)
The printer's NV memory stores data even after the printer power is turned off. NV memory
contains the following memory areas for the user:
• NV graphics memory
• User NV memory
• Memory switches (customized value)
• User-defined page
• Maintenance counter
NV memory can be rewritten about 100,000 times. As a guide, NV memory rewriting should
be 10 times or less a day when you program applications.
CAUTION
See the ESC/POS Application Programming Guide for more details.
NV Graphics Memory
Graphics, such as shop logos to be printed on receipts, can be stored. Even with a serial interface
model whose communication speed is low, high speed graphics printing is possible.
Use the TM-T88V Utility to register graphics.
You can also print and confirm the registered graphics in the NV graphics memory print mode.
• For detailed information about the TM-T88V Utility, see the TM-T88V Utility User’s
Manual.
• For information about how to use the NV graphics memory print mode, see "NV
Graphics Print Mode" on page 86.
User NV Memory
You can store and read text data for multiple purposes, such as for storing a note including
customizing or maintenance information of the printer.
22

Memory Switches (Customized Value)

With the memory switches (customized value), which are software switches for the printer, you
can set paper width, print density, font, USB class, interface mode, power supply unit capacity,
automatic paper cut, paper reduction, serial interface transmission speed, and printer model. See
"Setting the Memory Switches (Customized Value)" on page 48.
User-defined Page
You can store character data in the user-defined page (character code table: page 255) so that you
can also print characters not resident in the printer.
1
Maintenance Counter
With this function, printer information, such as the number of lines printed, the number of
autocuts, and printer operation time after the printer starts working, is automatically stored in
NV memory. You can read the information with the Status API of the APD or OPOS ADK to use
it for periodical checks or part replacement.
Maintenance Counter can be checked with the TM-T88V Utility or in a self-test.
23

Product Specifications
Printing method Thermal line printing
Cutting method Partial cut (cutting with one point in left edge left uncut)
Roll paper (single-ply) width 80 mm width paper printing: 79.5 ± 0.5 mm (3.13 ± 0.02")
58 mm width paper printing: 57.5 ± 0.5 mm (2.26 ± 0.02")
Interfaces Serial (RS-232), Parallel (IEEE1284), Ethernet (10/100BASE-T),

USB (Full-speed), Wireless LAN (IEEE802.11b)
Buffers Receive buffer 4 KB/45 bytes (selectable using DIP switch 1-2)
Downloaded buffer 12 KB (both for user-defined characters and downloaded

images)
NV graphics data 256 KB
Barcode/two-dimensional symbol/ UPC-A, UPC-E, JAN 8 (EAN 8), JAN 13 (EAN 13),
composite symbol printing CODE 39, ITF, CODABAR (NW-7), CODE 93,
CODE 128, GS1-128,
GS1 DataBar Omnidirectional, GS1 DataBar Truncated,
GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional,
GS1 DataBar Limited, GS1 DataBar Expanded,
GS1 DataBar Expanded Stacked,
PDF417, QR CODE, MaxiCode,
Composite Symbology
DKD function 2 drives
Supplied voltage DC 24 V ± 7%
Life Mechanism 20,000,000 lines
Thermal head 150 million pulses

150 km
Autocutter 2,000,000 cuts (when using the specified original paper types,
PD150R or PD160R)
1,500,000 cuts (when using paper types other than the
specified original paper types)
MTBF 360,000 hours
MCBF 70,000,000 lines
Temperature/humidity Operating: 5 to 45°C {41 to 113°F}, 10 to 90% RH

Storage: -10 to 50°C {14 to 122°F}, 10 to 90% RH
Overall dimensions 145 × 195 × 148 mm {5.71 × 7.68 × 5.83"} (W × D × H)
Weight (mass) Approx. 1.6 kg {3.5 lb} (roll paper excluded)
24

Printing Specifications
Printing method Thermal line printing
Dot density 180 × 180 dpi
Printing direction Unidirectional with friction feed (Reverse feed is not

supported.)
Printing width 80 mm width paper printing: 72.0 mm (2.83"), 512 dots

58 mm width paper printing: 50.8 mm (2.0"), 360 dots
Characters per line Font A (12 × 24) 80 mm width paper printing: 42

58 mm width paper printing: 30 1
Font B (9 × 17) 80 mm width paper printing: 56
58 mm width paper printing: 40
Maximum print speed*1 300 mm/s
Line spacing 4.23 mm {1/6"} (factory setting, programmable by

command)
dpi: dots per inch

*1: when the printer prints text (built-in fonts) with the default print density level at 24V and
25°C {77°F}.
Printing speed may be slower, depending on the such items as the data transmission
speed.
25

Character Specifications
Number of characters Alphanumeric characters: 95

Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
GB18030-2000: 28,533 (for Simplified Chinese characters model)
Big 5: 13,535 (for Traditional Chinese characters model)
Korean Kanji (KC C5601): 8,366 (for Korean model)
Thai character: 3-pass printing font (for South Asia model)
128 characters x 3 pages (133 character types)
Vietnam character (for South Asia model)
128 characters x 2 pages (135 character types)
Character structure Font A (default): 12 × 24 (including 2-dot horizontal spacing)

Font B: 9 × 17 (including 2-dot horizontal spacing)
Character size Font A Standard: 1.41 × 3.39 mm

Double-height: 1.41 × 6.77 mm
Double-width: 2.82 × 3.39 mm
Double-width, double-height: 2.82 × 6.77 mm
Font B Standard: 0.99 × 2.40 mm

Double-height: 0.99 × 4.80 mm
Double-width: 1.98 × 2.40 mm
Double-width, double-height: 1.98 × 4.80 mm
Note:
1. Space between characters is not included.
2. Characters can be scaled up to 64 times as large as the standard size.
26

Printable Area
80 mm paper width printing

The printable area of paper with a width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ±
0.008"} (512 dots), and the space on the right and left sides is approximately 3.7 mm {0.15"}.
79.5+-0.5 mm {3.13+-0.02”}
0.141+-0.05 mm {0.0056+-0.002”}
1
72.2+-0.2 mm {2.84+-0.008}
3.7 mm {0.15} 3.7 mm {0.15}

All the numeric values are typical.
• In 2-divided energizing, the print position within the printable area of the thermal
elements for dots 1 to 256 and 257 to 512 is shifted approximately 0.07 mm {0.0028"} in
the paper feed direction as shown in the figure below.
1 256
About 0.07 mm
257 512
elements for dots 1 to 128, 129 to 256, 257 to 384, and 385 to 512 is shifted
approximately 0.04 mm {0.0016"} in the paper feed direction as shown in the figure
below.
129 257 385 512

1
About 0.04 mm
27

58 mm paper width printing
The printable area of paper with a width of 57.5 ± 0.5 mm {2.26 ± 0.02"} is 50.8 ± 0.2 mm {2.00 ±
0.008"} (360 dots), and the space on the left side is approximately 3.7 mm {0.15"} and the space on
the right side is approximately 3.0 mm {0.12"}.
57.5+-0.5 mm {2.26 +-0.02”}
0.141+-0.05 mm {0.0056+-0.002”}
50.8+-0.2 mm {2.00+-0.008}
3.7 mm {0.15} 3.0 mm {0.12}

All the numeric values are typical.
elements for dots 1 to 256 and 257 to 360 is shifted approximately 0.07 mm {0.0028"} in
the paper feed direction as shown in the figure below.
1 256
About 0.07 mm
257 360
elements for dots 1 to 128, 129 to 256, and 257 to 360 is shifted approximately 0.04 mm
{0.0016"} in the paper feed direction as shown in the figure below.
129 257 360

1
About 0.04 mm
28

Printing and Cutting Positions
Last line of
a previous receipt
Manual-cutter position
Approx. 29
Approx. 15
Autocutter blade position
Center of the print dotline Printable area

1
Paper feed direction
[units: mm (All the numeric values are typical.)]
The values above may vary slightly as a result of paper slack or variations in the paper.
Take this into account when setting the cutting position of the autocutter.
29

Paper Specifications
Paper types Specified thermal paper
Form Roll paper
Size Roll paper diameter 83 mm {3.27"} maximum
Roll paper spool Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
Roll width when taken up 80 mm width paper printing: 80 + 0.5/-1.0 mm

58 mm width paper printing: 58 + 0.5/-1.0 mm
Paper width 80 mm width paper printing: 79.5 ± 0.5 mm

58 mm width paper printing: 57.5 ± 0.5 mm
Specified roll paper type NTP080-80/NTP058-80

In U.S.A.: Nakagawa Mfg. (USA) Inc.
In Europe: Nakagawa Mfg. (Europe) GmbH
In Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
(Original paper: TF50KS-E Nippon Paper Industries Co., Ltd.
Specified original paper type TF50KS-E, TF60KS-E (NIPPON Paper Industries Co., Ltd.)
PD150R, PD160R, PD190R (OJI Paper Mfg. Co., Ltd.)
P220AGB-1 (Mitsubishi Paper Mills Limited.)
P300, P310, P350 (Kanzaki Specialty Papers)
AF50KS-E (Jujo Thermal Oy)
F5041 (Mitsubishi HiTec Paper Flensburg GmbH)
KT55F20, KT48F20 (Koehler Paper Group)
• Paper must not be pasted to the roll paper spool.

• The remaining amount of the roll paper when a roll paper near-end is detected differs
depending on the spool type.
30

Electrical Characteristics
Supply voltage DC 24V ± 7%
Current consumption Standby Mean: Approximately 0.015A

(at 24V, 25°C, normal Maximum 1A for drawer kick-out driving.
print density)
Operating Mean: Approximately 1.8A
Note: When print ratio is

approximately 18%
• Continuous printing for 50 ABCDE
lines (repeating 20H-7FH) BCDE
∗ Font A
1
6789
∗ 42 columns 67890
∗ ASCII character
• 5 line feeding
• Autocutting 42 columns
31

Environmental Conditions
Temperature/ Operating 5 to 45°C {41 to 113°F}, 10 to 90% RH (See the operating

Humidity temperature and humidity range below.)
Storage -10 to 50°C {14 to 122°F}, 10 to 90% RH (except for paper)

(Factory packing)
[%RH]
90 34°C, 90%
31°C, 90%
Relative humidity
34°C, 75%
65
40°C, 65%
45°C, 50%
Operating environment 45°C, 43%
range
Specified original paper

10
other than below
Specified original paper:
P300, P310, P350
5 34 40 45 [°C]
Ambient temperature
Acoustic noise (operating) Approximately 55 dB (bystander position)

Note:
The values above are measured in the Epson evaluation
condition.
Acoustic noise differs depending on the paper used, printing
contents, and the setting values, such as print speed or print
density.
32

External Dimensions and Mass

• Width: Approximately 145 mm {5.71"}
• Depth: Approximately 195 mm {7.68"}
• Height: Approximately 148 mm {5.83"}
• Mass: Approximately 1.6 kg {3.53 lb} (except for roll paper)

[Units: mm]
33

Option Specifications
Power Supply Unit (PS-180)
136
68
33
[Unit: mm]
Electric Input conditions Input voltage (rating): 90 to 264VAC

characteristics (100VAC -10% to 230VAC +15%)
Frequency (rating): 50/60 Hz ± 3 Hz
Input current (rating): 1.3A
Output conditions Output voltage (rating): 24VDC ± 5%
Output current (rating): 2.1A
Case specifications Dimensions 136 × 33 × 68 mm {5.35 × 1.30 × 2.68"}

(W × D × H) (excluding projections)
Weight Approx. 0.4 kg {14.11 oz} (excluding the AC cable)
Color Black (matte)
For Energy Star printers, always use the power supply that came with your printer.
For detailed information about the PS-180, see the instruction manual for the PS-180.
34

Chapter 2 Setup
Setup
This chapter describes setup and installation of the product and peripherals.
Flow of Setup
This chapter consists of the following sections along with the setup flow of the product and
peripherals.
1. Installing the Printer (page 36)
2. Changing the Paper Width (page 37)
3. Setting the DIP Switches (page 39)

2
4. Connecting the Power Supply Unit (PS-180) (page 47)
5. Setting the Memory Switches (Customized Value) (page 48)
6. Adjusting the Paper Roll Near-End Sensor (page 53)
7. Connecting the Printer to the Host Computer (page 54)
8. Connecting the Cash Drawer (page 63)
9. Setting the Internal Buzzer (for Model with an Internal Buzzer) (page 65)
10. Connecting the Optional External Buzzer (page 66)
11. Attaching the Connector Cover (page 70)
12. Arranging the Cables (page 72)
35

Installing the Printer
You can install this printer horizontally. With an optional hanging bracket (WH-10), you can also
attach the printer to a wall.
Important Notes on Horizontal Installation

• The printer must be installed horizontally on a flat surface (not tilted).
• Do not place the printer in dusty locations.
• Do not knock or strike the printer. This may cause defective print.
• Do not catch cables or place foreign matter under the printer.
Important Notes on Wall Hanging

You need to perform the following tasks to install the printer on a wall. For more details, see the
installation manual for the optional wall hanging bracket (WH-10).
• Installing the roll-paper stoppers
• Changing the location of the roll paper near-end sensor
• Attaching the connector cover
• Attaching the wall hanging bracket (WH-10)
For the other notes, see the installation manual for the optional wall hanging bracket (WH-10).
Be sure to attach the connector cover when you install the printer on a wall using the
wall hanging bracket.
36

Chapter 2 Setup
Changing the Paper Width

The printer is initially set to print on 80 mm width paper and you can change the printer to print
on 58 mm width paper by installing the roll paper guide and changing the paper width setting
with the customized value.
Follow the steps below to install the roll paper guide.
Once you change the paper width from 80 mm to 58 mm, you cannot change it back to 80
mm.
To set the customized value, see "Setting the Memory Switches (Customized Value)" on
page 48.
1 Open the roll paper cover.
2 Install the roll paper guide so that the projection on its bottom is aligned
with the hole at the right of the roll paper holder. 2
Hole
3 Tighten the enclosed screw to fix the roll paper guide.
37

4 Paste the enclosed 2 small strips along the roll paper guide on the
bottom of the roll paper holder.
Make sure the space between the top edge of the strip and the line of the groove in the roll
paper guide is 0.5 mm or less.
38

Chapter 2 Setup
Setting the DIP Switches

On this printer, you can make various settings with DIP switches.
The DIP switches are already set for the current interfaces. Change the setting if necessary.
Functions of the DIP switches differ depending on the interface.
For models with the buzzer function, see also "Setting the Internal Buzzer (for Model with
an Internal Buzzer)" on page 65.
Setting Procedure
Follow the steps below to change the DIP switch settings.
Before you remove the DIP switch cover, turn the printer off.
Otherwise, a short-circuit may cause the printer to malfunction.
CAUTION
DIP switch settings are enabled only when the power is turned on or the printer is reset via
2
the interface. If the settings are changed after that, the functions will not change.
1 Make sure the power supply for the printer is turned off.
2 Unscrew the screw to remove the DIP switch cover from the base of the
printer.
DIP switch bank 2
DIP switch bank 1
3 Set the DIP switches, using the tip of a tool, such as a small screwdriver.
4 Replace the DIP switch cover, and screw it in place.
39

For Serial Interface
When using the built-in USB interface, it is not necessary to change the DIP switch setting but
their function changes. For the details, see "For Built-in USB Interface" on page 43.
DIP Switch Bank 1

Initial
SW Function ON OFF
setting
1-1 Data reception error Ignored Prints “?” OFF
1-2 Receive buffer capacity 45 bytes 4 KB OFF
1-3 Handshaking XON/XOFF DTR/DSR OFF
1-4 Word length 7 bits 8 bits OFF
1-5 Parity check Yes No OFF
1-6 Parity selection Even Odd OFF
1-7 See the “ Transmission Speed (DIP Switches ON
Transmission speed selections
1-8 1-7/1-8)” table below. OFF
For DIP switch 1-2 (Receive buffer capacity), see also DIP switch 2-5 (Sets the release
condition of the receive buffer BUSY state.)
Transmission Speed (DIP Switches 1-7/1-8)

Transmission speed (bps: bits per second) SW 1-7 SW 1-8
38400
ON ON
2400, 4800, 9600, 19200, 38400, 57600, 115200*
4800 OFF ON
9600 (default) ON OFF
19200 OFF OFF
bps: bits per second

* When DIP switches 1-7 and 1-8 are set to ON, the value (initially 38400) can be set to any of the
values listed in the lower portion of the row using a command, memory switch setting mode, or
TM-T88V Utility. (See "Setting the Memory Switches (Customized Value)" on page 48.)
Depending on print conditions, such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted, which can cause white lines due
to intermittent print (the motor sometimes stops). To avoid this, set the transmission speed
higher or keep the print speed constant by setting it lower.
40

Chapter 2 Setup
DIP Switch Bank 2

Initial
SW Function ON OFF
setting
• Offline
2-1 Handshaking (BUSY condition) Receive buffer full OFF
• Receive buffer full
Reser ved (Do not change
2-2 Fixed to OFF OFF
setting)
2-3 ∼ See "Selecting the Print Density (DIP Switches
Selects print density OFF
2-4 2-3/2-4)" on page 45.
Releas es the BUSY R e l e a s e s t h e B US Y
Sets the release condition of the
state when the state when the
receive buffer BUSY state. (This
2-5 remaining capacity remaining capacity OFF
function is effective when DIP
of the receive buffer of the receive buffer
Switch 1-2 is set to off.)
reaches 138 bytes. reaches 256 bytes.
setting)
2-7
2-8
I/F pin 6 reset signal
IF pin 25 reset signal
Enabled
Enabled
Disabled
Disabled
OFF
OFF 2
• For DIP Switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 46.
• Do not change the setting of DIP switches 2-2 and 2-6. Otherwise, the printer may not
operate normally.
41

For Parallel Interface
When using the built-in USB interface, it is not necessary to change the DIP switch setting but
their function changes. For the details, see "For Built-in USB Interface" on page 43.
DIP Switch Bank 1

Initial
SW Function ON OFF
setting
1-1 Auto line feed Always enabled Always disabled OFF
Roll paper end sensor
Selects paper sensors to output
enabled, roll paper
1-3 p a pe r- e n d s i g n a l s ( d e fa u l t Disabled OFF
n e a r- e n d s e n s o r
value of a command)
enabled
1-4 Error signal output Disabled Enabled OFF
1-5 ∼
Undefined — OFF
1-8
DIP Switch Bank 2

Initial
SW Function ON OFF
setting
• Offline
setting)
2-4 2-3/2-4)" on page 45.
2-6 ∼ Reser ved (Do not change
Fixed to OFF OFF
2-7 settings)
IF pin 31 reset signal (Do not
2-8 Fixed to ON ON
change setting)
• Do not change the setting of DIP switches 2-2, 2-6, and 2-7. Otherwise, the printer may
not operate normally.
42

Chapter 2 Setup
For Built-in USB Interface

When using the serial or parallel interface, it is not necessary to change the DIP switch setting
but their function changes. For the details, see "For Serial Interface" on page 40 and "For Parallel
Interface" on page 42.
DIP Switch Bank 1

Factory
SW Function ON OFF
setting
1-3 ∼
Undefined — OFF
1-6
1-7 Undefined — *
Setting of USB power-saving
1-8
function
Disabled Enabled OFF
2
* Varies depending on the interfaces.
DIP Switch Bank 2

Factory
SW Function ON OFF
setting
• Offline
setting)
2-4 2-3/2-4)" on page 45.
Fixed to OFF OFF
2-7 settings)
2-8 Reserved — *
* Varies depending on the interfaces.
43

For Ethernet/Wireless LAN/USB Interface
DIP Switch Bank 1

Factory
SW Function ON OFF
setting
1-3 ∼
Undefined — OFF
1-8
DIP Switch Bank 2

Factory
SW Function ON OFF
setting
• Offline
setting)
2-4 2-3/2-4)" on page 45.
Fixed to OFF OFF
2-7 settings)
2-8 Fixed to ON ON
setting)
44

Chapter 2 Setup
Selecting the Print Density (DIP Switches 2-3/2-4)
Function SW 2-3 SW 2-4
Do not set ON ON
Print density (standard) OFF OFF
Print density (darker than standard) ON OFF
Print density (dark) OFF ON
• If the print density is set to “Darker than standard” or “Dark” level, printing speed may be
reduced.
• The print density can be set with DIP switches (2-3/2-4) or the customized value. (See
"Setting the Memory Switches (Customized Value)" on page 48.) The initial setting of the
customized value is “Depends on the DIP switch settings.” If the customized value is
changed, the value set with the customized value is enabled.
45

Selecting the BUSY Status
With DIP switch 2-1, you can select conditions for invoking a BUSY state as either of the
following:
• When the receive buffer is full
• When the receive buffer is full or the printer is offline
In either case above, the printer enters the BUSY state after power is turned on (including
resetting with the interface) and when a self-test is being run.
Printer BUSY Condition and Status of DIP Switch 2-1

DIP SW 2-1
Printer status
ON OFF
Offline Dur ing th e per iod after power i s tur ned on
(including resetting with the interface) to when the BUSY BUSY
printer is ready to receive data.
During the self-test. BUSY BUSY
When the cover is open. — BUSY
During paper feed with the Feed button. — BUSY
When the printer stops printing due to a paper-end
— BUSY
(when printer has run out of roll paper).
When waiting for the paper Feed button to be
— BUSY
pressed before macro execution.
When an error has occurred. — BUSY
When the receive buffer becomes full. BUSY BUSY
46

Chapter 2 Setup
Connecting the Power Supply Unit (PS-180)

Use the PS-180 or an equivalent product as the power supply unit.
• Always use the EPSON PS-180 or an equivalent product as the power supply unit.
Using a nonstandard power supply can result in electric shock and fire.
WARNING • Should a fault ever occur in the EPSON PS-180 or equivalent product, immediately
turn off the power to the printer and unplug the power supply cable from the wall
socket.
Connecting the Power Supply Unit
1 Make sure the printer’s power supply is turned off and the power supply
unit’s power cable has been unplugged from the wall socket.
2 Insert the connector of the power supply cable onto the power supply
2
connector (stamped 24V).
• Be sure to unplug the power supply unit’s cable from the wall socket whenever
connecting or disconnecting the power supply unit to the printer.
WARNING Failure to do so may result in damage to the power supply unit or the printer.
• Make sure the wall socket power supply satisfies the rated voltage requirements
of the power supply unit. Never insert the power supply cable plug into a socket
that does not meet the rated voltage requirements of the power supply unit.
Doing so may result in damage to both the power supply and the printer.
Before removing the DC cable connector from the PS-180, make sure the power supply
cable has been removed from the power supply unit; then grasp the arrow-marked section
of the connector and pull straight out.
The optional power supply box (OT-BX88V) is available. You can store the power supply
unit in the box attached to the printer.
47

Setting the Memory Switches
(Customized Value)
With the “memory switch (customized value),” a software switch for this printer, you can set the
functions shown in the table below.
The memory switches (customized value) are already set. Change the setting if necessary.
For an outline of the functions, see the following section.
Use the methods in this table to set the memory switches (customized value).
Memory Switch ESC/POS

TM-T88V Utility
Setting Mode Commands
Paper width ✔ ✔ ✔
Print density ✔ ✔ ✔
Multi-tone print density ✔ ✔ ✔
Print speed ✔ ✔ ✔
Font
• Code page
✔ ✔ ✔
• International character set
• Font A/B replacement
Optional Buzzer ✔ ✔ ✔
USB class ✔ ✔ ✔
Selection of interface mode ✔ ✔
Number of head energizing parts ✔ ✔
Power supply unit capacity ✔ ✔ ✔
Automatic paper cut ✔ ✔ ✔
Paper reduction
• Upper space reduction
• Lower space reduction
✔ ✔ ✔
• Line space reduction rate
• Line feed reduction rate
• Barcode height reduction rate
Transmission speed
✔ ✔ ✔
for serial interface
Printer model*1 ✔ ✔
*1: Setting printer model is also available with the TM-T88V Printer Model Setting Utility.
48

Chapter 2 Setup
• To directly configure the printer in the memory switch setting mode, see "Memory Switch
Setting Mode" on page 88.
• For detailed information about the TM-T88V Utility, see the TM-T88V Utility User’s
Manual.
• For detailed information about ESC/POS commands, see the ESC/POS Application
Programming Guide.
Functions
Setting the paper width

• 80 mm (initial setting)
• 58 mm
• Be sure to install the roll paper guide when you select the 58 mm paper width. (See
"Changing the Paper Width" on page 37.)
• Once you change the paper width from 80 mm to 58 mm, you cannot change it back to
80 mm.
2
Setting the print density
Selectable from levels 1 to 13 (70% ∼130%)
The print density can be set with DIP switches (2-3/2-4) or the customized value. (See
"Selecting the Print Density (DIP Switches 2-3/2-4)" on page 45.) The initial setting of the
changed, the value set with the customized value is enabled.
Setting the multi-tone print density

Selectable from levels 1 to 13 (70% ∼130%)
• First change the print density, and then configure the Multi-tone print density.
• If you set the density too high, the contrast becomes lower. Select the density level
checking the overall tone balance of your image.
49

Setting the print speed
Selectable from levels 1 to 13 (Slow ∼Fast) (initial setting: level 13)
Depending on print conditions, such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted, which may cause white lines due
to intermittent print (the motor sometimes stops). To avoid this, keep the print speed
constant by setting it lower, or set the transmission speed higher for the serial interface.
(See "Transmission Speed (DIP Switches 1-7/1-8)" on page 40.)
Setting font
• Code page: Selectable from 43 pages including user defined page
• International character set: Selectable from 18 sets
• Font A/B replacement
Optional Buzzer
When to sound the buzzer is selectable from the following occasions.
• When an error occurs
• When automatic paper cut activates
• When specified pulse 1 (2 pin) occurs
• When specified pulse 2 (5 pin) occurs
USB Class
• Printer Class
• Vendor Class
50

Chapter 2 Setup
Selecting interface mode

Selectable from: automatic selection, fixed to UB interface, or fixed to built-in USB. Those 3
modes are described in both tables below.
The TM-T88V has dual interfaces: a built-in USB interface and another interface selected
by the customer. (The selectable interface is referred to as the “UB” interface.) The table
below describes the modes you can set for the printer to control the dual interfaces.
For models with serial/parallel UB
Interface mode UB Built-in USB
Automatic selection (initial setting) Available Available
Fixed to UB Available Not available
Fixed to built-in USB Not available Available
For models with other UB

2
Interface mode UB Built-in USB
Automatic selection (initial setting) Available Not available
Fixed to UB Available Not available
Fixed to built-in USB Not available Available
Automatic selection:
The interface of either the UB or built-in USB to which data is transmitted first is selected.
Once the interface is selected, the selection is enabled until the power is turned off or the
printer is reset.
Setting the number of head energizing parts

• One-part energizing (initial setting)
• Two-part energizing
• Four-part energizing
• Usually, the number of head energizing parts does not need to be changed.
• The maximum print speed (300 mm/s) can be performed only when one-part energizing
is selected.
51

Setting the power supply unit capacity
Selectable from levels 1 to 3 (Low ∼High) (initial setting: level 3)
Setting the automatic paper cut

• Not use this function (initial setting)
• Cut paper when the cover is closed
• Print logo when paper is cut
Printing logo when paper is cut is not available with memory switch setting mode.
Setting the paper reduction

• Extra upper space reduction: enabled or disabled (initial setting)
• Extra lower space reduction: enabled or disabled (initial setting)
• Line space reduction rate: not reduced (initial setting), 25%, 50%, or 75%
• Line feed reduction rate: not reduced (initial setting), 25%, 50%, or 75%
• Barcode height reduction rate: not reduced (initial setting), 25%, 50%, or 75%
Setting the transmission speed for serial interface

When DIP switches 1-7 and 1-8 are set to ON, the value (initially 38400) can be set to 2400, 4800,
9600, 19200, 38400, 57600, or 115200. (See "Transmission Speed (DIP Switches 1-7/1-8)" on page
40.)
Setting the printer model

When you use the TM-T88V with the APD Ver. 4.00 ~ 4.04, you need to change the printer model
name to “TM-T88IV.”
52

Chapter 2 Setup
Adjusting the Paper Roll Near-End Sensor

Below are two situations where a roll paper NE sensor adjustment is required.
• To adjust the detection position to suit the diameter of the roll paper core used.
• To adjust the detection position of remaining amount of paper.
• Since roll paper cores vary slightly in shape, depending on paper roll design and
manufacturing tolerances, it is impossible to detect the remaining paper exactly.
• Use roll paper with a core inner diameter of 12 mm {0.47"} and outer diameter of 18 mm
{0.71"} so that the NE sensor can detect the remaining paper as accurately as possible.
Follow the steps below to adjust the roll paper near-end detector.
1 Open the roll paper cover, and remove the roll paper.
2 Loosen the adjustment screw fastening the sensor, and align the upper
edge of the positioning plate with the adjustment position.
Remaining amount of paper
2
Adjustment position
(outer diameter: mm)
Upper Approx. 27 {1.06"}
Lower (Initial setting) Approx. 23 {0.97"}
3 Tighten the adjustment screw.
4 After adjustment, make sure that the detection lever operates smoothly.
For wall-hanging
Detection lever
Po s i t i o n i n g
plate
Adjustment screw
For horizontal installation
Adjustment screw
Po s i t i o n i n g
plate
Detection lever
53

Connecting the Printer to the Host Computer
• Be sure to install the driver before connecting the printer to the host computer.
• The printer uses modular connectors specifically designed for the cash drawer. Do not
connect these connectors to an ordinary telephone line.
For Serial Interface
Serial interface connection diagram

When this printer is connected to a host computer by the serial interface, two connection forms
are possible:
• Stand alone
• Pass-through connection
Stand alone
This printer is connected to the host computer via the serial port. When a customer display
(DM-D) is to be connected, connect it to the host computer via the serial port.
DM-D
Serial cable
Serial cable Modular cable
TM-T88V Cash drawer
Pass-through connection
This printer is connected to the host computer over the serial interface via a customer display
(DM-D).
DM-D
Modular cable
TM-T88V Cash drawer

Serial cable Serial cable
54

Chapter 2 Setup
Connecting the serial interface (RS-232) cable

Be sure to turn off the power supply for both the printer and host computer before
connecting the cables.
WARNING
1 Insert the interface cable connector firmly into the interface connector
on the connector panel.
2 When using connectors equipped with screws, tighten them to secure

the connectors firmly.
2
3 When using interface cables equipped with a grounding line, attach the
ground line to the screw hole marked “FG” on the printer.
4 Connect the other end of the interface cable to the host computer.
55

For Parallel Interface
Parallel interface connection diagram

This printer is connected to the host computer via the parallel port. When a customer display
(DM-D) is to be connected, connect it to the host computer via the serial port.
DM-D
Serial cable
Parallel cable Modular cable
TM-T88V Cash drawer
Connecting the parallel interface cable
1 Insert the interface cable connector firmly into the interface connector
on the connector panel.
2 Press down the clips on either side of the connector to lock it in place.
3 When using interface cables equipped with a ground line, attach the
ground line to the screw hole marked “FG” on the printer.
4 Connect the other end of the interface cable to the host computer.
56

Chapter 2 Setup
For USB Interface
If you want to communicate via the built-in USB interface when you use a model with an
interface other than the serial/parallel interface, you need to change the interface mode
with the memory switch (customized value). To set the memory switch (customized value),
see "Setting the Memory Switches (Customized Value)" on page 48.
USB interface connection diagram

When this printer is connected to the host computer by the USB interface, two connection forms
are possible:
• Stand alone
• Y connection (only with the UB-U01III/U02III)
Stand alone
This printer is connected to the host computer via the USB port. When a customer display
(DM-D) is to be connected, connect it to the host computer via the serial port. 2
DM-D
Serial cable
USB cable Modular cable
TM-T88V Cash drawer
57

Y connection (only with the UB-U01III/U02III)
This printer is connected to the host computer via the USB port. When a customer display
(DM-D) is to be connected, connect it to the printer via the modular cable.
• Make sure to pull out the power cable before connecting cables.
• When connecting a customer display to the printer, connect the modular jack from the
customer display to the DM connector.
• Set the communication conditions of the customer display as follows:
∗ Baud rate: 19200 bps
∗ Bit length: 8-bit
∗ Parity: no parity
∗ Stop bit: 1
DM-D
Modular cable
USB cable
Modular cable
Cash drawer
TM-T88V
Connecting the built-in USB interface cable
1 Put the USB cable on the hook as shown in the figure, then connect it
firmly to the built-in USB interface connector.
2 Connect the other connector of the cable to the host computer.
Built-in USB interfaceconnector
USB cable
Hook
58

Chapter 2 Setup
Connecting the USB interface cable
1 Attach the locking wire saddle at the location shown in the figure below.
2 Put the USB cable through the locking wire saddle.

Putting the USB cable through the locking wire saddle, as shown in the figure below,
prevents the cable from coming unplugged.
UB-board
USB upstream connector
Locking wire saddle
USB cable
3 Connect the USB cable from the host computer to the USB upstream 2
connector.
59

For Ethernet Interface
Connect the printer to a network by a LAN cable via a hub.
For the setting method of the IP address, seeTM-T88V Software User's Manual.
Ethernet interface connection diagram
DM-D
Serial
cable
10/100BASE-T
Modular cable
TM-T88V Cash drawer TM-T88V
A customer display (DM-D series) cannot be connected to the printer when the printer is
connected to the host computer. To connect the customer display, connect the printer to the
host computer via the serial interface.
60

Chapter 2 Setup
Connecting the Ethernet interface cable

• When LAN cables are installed outdoors, make sure devices without proper surge
protection are cushioned by being connected through devices that do have surge
CAUTION protection.
Otherwise, the devices can be damaged by lightning.
• Never attempt to connect the customer display cable, drawer kick-out cable, or
the standard telephone line cable to the 10/100BASE-T LAN connector.
Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the
connector clicks into place.
10/100BASE-T LAN
interface connector 016(146'.'%1//70+%#6+1075'
-'+06'.'(10#05%*.755/
LED
(Green)
LED
(Yellow)
Switch 2
Press down the switch for a
while when the power is on to
initialize to the factory settings.
When using the Ethernet interface, the network configuration is required. Make the settings
using TM-T88V Utility.
61

For Wireless LAN Interface
For details on how to set up a wireless LAN interface, see the TM-T88V Software User's Manual.
Wireless LAN interface connection diagram
Access point
Modular cable
TM-T88V Cash drawer
When using the wireless LAN interface, the network configuration is required. Make the
settings using TMNet WinConfig.
62

Chapter 2 Setup
Connecting the Cash Drawer

When using a cash drawer, connect the cash drawer.
Use the cash drawer handled by EPSON or your dealer.
If the optional external buzzer is used, you cannot use a cash drawer.
Connecting the Drawer Kick-out Cable
• Specifications of drawers differ depending on makers or models. When you use a

drawer other than specified, make sure its specification meets the following con-
WARNING ditions.
Otherwise, devices may be damaged.
∗ The load, such as a drawer kick-out solenoid, must be connected between pins 4 and
2 or pins 4 and 5 of the drawer kick-out connector.
∗ When the drawer open/close signal is used, a switch must be provided between
drawer kick-out connector pins 3 and 6.
∗ The resistance of the load, such as a drawer kick-out solenoid, must be 24 Ω or more
or the input current must be 1A or less.
2
∗ Be sure to use the 24V power output on drawer-kick out connector pin 4 for driving the
equipment.
• Use a shield cable for the drawer connector cable.
• Two driver transistors cannot be energized simultaneously.
• Leave intervals longer than 4 times the drawer driving pulse when sending it
continuously.
• Be sure to use the printer power supply (connector pin 4) for the drawer power
source.
• Do not insert a telephone line into the drawer kick-out connector.
Doing so may damage the telephone line or printer.
Connect the connector of the drawer kick-out cable to the printer.
Drawer kick-out connector
63

Drawer Connection Circuitry
F.G 1 Drawer kick-out connector

With shielded
2
Drawer kick-out solenoid
+24V 4
Control device
5
Drawer open/close switch
6
Printer side User side [Drawer kick-out side]
64

Chapter 2 Setup
Setting the Internal Buzzer

(for Model with an Internal Buzzer)
When using the internal buzzer, configure the buzzer.
Models with the buzzer function can beep the buzzer when the drawer is opened.
The buzzer setting is performed by setting the DIP switches for the buzzer and specifying
connector pin numbers to which a command outputs a pulse signal.
DIP
Specified connector pin ON OFF Initial setting
switch
Buzzer does not

1 Drawer kick out connector pin 2 Buzzer beeps. ON
beep.
Buzzer does not

2 Drawer kick out connector pin 5 Buzzer beeps. OFF
beep.
Since the buzzer drive signal and the cash drawer drive signal are common in the printer,
do not use the same connector pin numbers to output the signal for the buzzer and the 2
cash drawer.
Programming Guide.
65

Connecting the Optional External Buzzer
When using the optional external buzzer (OT-BZ20), install the optional external buzzer.
If your printer is not equipped with a buzzer, you can use the optional external buzzer (OT-
BZ20) by connecting it to the drawer.
• The optional external buzzer and the drawer cannot be used together at the same time.
• If you configure the memory switch (customized value) setting to enable the optional
external buzzer, the drawer cannot be opened because the pulse is not sent to the
drawer kick connector pin.
• Make sure to use the accessory magic tape (hook and loop fastener) to attach the
optional external buzzer to the printer.
• Be careful not to spill water, oil, solvent, or any other liquid over the printer. Doing so may
result in malfunction of the printer.
Unpacking
Open the package and confirm that it contains all of the parts listed in the illustration. If any
parts are missing or damaged, please contact your dealer for assistance.
Affixing tape
Optional external buzzer (1 pair, 2 pieces) User’s Manual
66

Chapter 2 Setup
Installation Position
This product is recommended to be installed in the following positions.
• When using the printer horizontally: either side
• When using the printer vertically or on the wall:
either side/top/bottom (only for wall-hanging installation) *
* For the TM-T88V, the buzzer cannot be installed on the bottom
Vertical/Wall-hanging
Horizontal installation
installation
• Do not install the optional external buzzer at the roll paper exit.
• To prevent liquid from entering inside, it is recommended to install the optional external
2
buzzer so that the volume adjustment knob is positioned sideways or downward. (For
details of the volume adjustment knob, see "Adjusting the Buzzer Volume" on page 69.)
67

Installation Procedures
1 Turn off the printer.

Connect and disconnect the optional external buzzer while the printer is turned off. If you
connect it while the printer is turned on, the buzzer does not function correctly.
2 Clean and dry the printer case where the optional external buzzer will
be installed.
3 With 2 pieces of the affixing tape combined, peel off the sticker on one
side, and paste it around the center of the attaching surface of the
optional external buzzer.
Affixing tape
4 Connect the cable of the optional external buzzer to the drawer kick-
out connector on the printer.
• Be sure to connect to the drawer kick-out connector on the applicable printer.
• Do not connect both the optional external buzzer and the drawer by using a splitter or
similar device.
Drawer kick-out
connector
68

Chapter 2 Setup
5 Peel off the sticker on the other side of the affixing tape, and attach and
fix the optional external buzzer to the printer case.
Printer case
6 Turn on the printer.
7 Make settings for the optional external buzzer on the printer.

• To use this product, be sure to enable the optional external buzzer with the printer set-
ting. For the details on the setting, see the Technical Reference Guide for each printer.
• When the optional external buzzer is enabled with the printer setting, the drawer cannot
be driven.
2
Adjusting the Buzzer Volume
Turn the volume adjustment knob to adjust the buzzer volume.
High Volume adjustment knob
Low
Setting the Optional External Buzzer

When and how to beep can be set by the driver, TM-T88V Utility or the printer's customized
value. (See "Setting the Memory Switches (Customized Value)" on page 48.)
69

Attaching the Connector Cover
When using the connector cover, attach the connector cover.
Follow the steps below to attach the connector cover to protect cables.
1 Turn over the printer.
2 Position the two hooks on both sides of the connector cover so that they
hook the printer case.
Hooks
3 Push the connector cover down to click onto the printer case.
4 Pass each cable through the cable exits at the bottom of the connector
cover.
5 Turn over the printer and make sure the cables are not pinched.
70

Chapter 2 Setup
• The serial, USB, or power cables can pass beneath the front of the printer so that the
back of the printer looks uncluttered.
• To remove the connector cover, turn the printer over, and push the connector cover
down while pushing both sides of the connector cover inward to detach the hooks from
the printer case.
71

Arranging the Cables
Route the cables when using the connector cover.
Pass the cables through cable exits in the connector cover. The connector cover has cable exits on
the back and both sides.
You can also route the cables out the front by passing them through the notch in the printer
bottom.
If you want to pass the USB cable through the cable exit on the back, fit the cable under the hook
on the printer to prevent the cable from coming off.
Hooks
After the cable arrangement, turn over the printer, and make sure the cables are not pinched.
72

Application Development Information

This chapter describes how to control the printer and gives information useful for printer
application development.
How to Control the Printer

Use a driver or ESC/POS commands to control the printer.
Selecting a Driver
Choose one of the drivers listed in "Drivers" on page 79, depending on the application operating
environment.
For information about the driver operating environment, see the installation manual for each
driver.
When you newly develop an application

• Use APD if you want to print True Type fonts or print many graphics.
• OPOS ADK is recommended for system extensibility. An OPOS driver is provided for various
3
peripherals and it is a POS industry standard now. It enables POS system efficiency, reduction
of development cost, and effective use of application assets.
You can use all functions, including ones not supported by OPOS ADK or APD, by using
ESC/POS commands through your driver. Use the DIRECT I/O function of OPOS ADK, the
control A command of APD, or Status API to send ESC/POS commands from each driver.
(See "ESC/POS command functions" on page 74.)
73

ESC/POS Commands
ESC/POS is the Epson original printer command system. With ESC/POS commands, you can
directly control all the TM printer functions, but detailed knowledge of printer specifications or
combination of commands is required, compared to using a driver.
To use ESC/POS commands, you need to agree to a nondisclosure contract first and obtain the
ESC/POS Application Programming Guide. Ask your dealer for details.
The ESC/POS command functions are listed below. See the ESC/POS Application Programming
Guide for more details.
ESC/POS command functions
Commands for printing
Print and line feed
Print and feed n lines
Print data in page mode
Print and return to standard mode (in page mode)
Commands for line spacing
Set line spacing
Select default line spacing
Commands for print character
Select character code table
Select an international character set
Set right-side character spacing
Set all character fonts and styles
Turn underline mode on/off
Turn emphasized mode on/off
Select character font
Select character size
Turn smoothing mode on/off
Turn upside-down print mode on/off
Turn white/black reverse print mode on/off
Set character fonts and styles
74

Select/cancel user-defined character set
Define user-defined characters
Cancel print data in page mode
Commands for panel buttons
Enable/disable panel buttons
Commands for paper sensors
Select paper sensor(s) to stop printing
Select paper sensor(s) to output paper-end signals
Commands for print positions
Horizontal tab
Set horizontal tab positions
Set left margin
Set print area width
Select justification
Set absolute print position
Set relative print position 3

Set print area in page mode
Select print direction in page mode
Set absolute vertical print position in page mode
Set relative vertical print position in page mode
Commands for bit image
Transmit the NV graphic memory capacity
Print the graphics data in the print buffer
Transmit the remaining capacity of the NV graphics memory
Transmit the key code list for defined NV graphics
Delete the specified NV graphics data
Define the NV graphics data
Print the specified NV graphics data
Store the graphics data in the print buffer
Select bit-image mode
75

Define downloaded bit image
Print downloaded bit image
Register the Windows BMP in the NV graphics memory
Define Windows BMP NV graphics
Commands for status
Enable/disable Automatic Status Back (ASB)
Transmit status
Transmit real-time status
Commands for barcode
Print barcode
Set barcode height
Set barcode width
Select print position of HRI characters
Select font for HRI characters
Commands for two-dimensional codes
PDF417: Set the number of columns in the data region
PDF417: Set the number of rows
PDF417: Set the width of module
PDF417: Set the row height
PDF417: Set the error correction level
PDF417: Select the options
PDF417: Store the data in the symbol storage area
PDF417: Print the symbol data in the symbol storage area
PDF417: Transmit the size information of the symbol data in the symbol storage area
QR Code: Select the model
QR Code: Set the size of module
QR Code: Select the error correction level
QR Code: Store the data in the symbol storage area
QR Code: Print the symbol data in the symbol storage data area
QR Code: Transmit the size information of the symbol data in the symbol storage area
76

MaxiCode: Select the mode
MaxiCode: Store the data in the symbol storage area
MaxiCode: Print the symbol data in the symbol storage area
MaxiCode: Transmit the size information of the symbol data in the symbol storage area
Two-dimensional GS1 DataBar: Set the width of module
Two-dimensional GS1 DataBar: Set the maximum width of GS1 DataBar Expanded Stacked
Two-dimensional GS1 DataBar: Store the data in the symbol storage area
Two-dimensional GS1 DataBar: Print the symbol data in the symbol storage area
Two-dimensional GS1 DataBar: Transmit the size information of the symbol data in the symbol
storage area
Composite Symbology: Set the width of module
Composite Symbology: Set the maximum width of GS1 DataBar Expanded Stacked
Composite Symbology: Select font for HRI characters
Composite Symbology: Store the data in the symbol storage area
Composite Symbology: Print the symbol data in the symbol storage area
Composite Symbology: Transmit the size information of the symbol data in the symbol storage
area
Commands for mechanical control

3
Select cut mode and cut paper
Commands for customization
Set the customized setting values
Transmit the customized setting values
Set the configuration item for the serial interface
Transmit the configuration item for the serial interface
Delete the specified record of NV user memory
Store the data in the specified record of NV user memory
Transmit the data in the specified record of NV user memory
Transmit capacity of the NV user memory currently being used
Transmit the remaining capacity of the NV user memory
Transmit the key code list
Delete all data in the NV user memory
77

Commands for sub-functions
Initialize printer
Transmit printer ID
Set horizontal and vertical motion units
Select peripheral device
Generate pulse to drawer
Generate pulse to drawer in real-time
Execute power-off sequence
Clear buffer(s)
Enable/disable real-time command
Send real-time request to printer
Select page mode
Select standard mode
Set the process ID response
Execute test print
Select the print speed
Select the number of parts for the thermal head energizing
Initialize maintenance counter
Transmit maintenance counter
78

Software and Manuals

The following software and manuals are provided for application development.
Drivers
Software Manual
EPSON Advanced Printer Driver (APD): • APD Install Manual

In addition to ordinary Windows driver functions, this • APD TM/BA/EU Printer Manual
driver has controls specific to POS, such as controls for • APD Printer Specification
paper cut, a cash drawer, or customer display. The • Devmode API/PRINTERINFO Manual
Status API (Epson original DLL) that monitors printer
• Status API Manual
status and sends ESC/POS commands is also
• Sample Program Guide
attached to this driver.
OPOS ADK: • OPOS Installation Manual

This OCX driver can control POS peripherals using OLE • User’s Manual
technology*1. Because controlling POS peripherals • Application Development Guide
with original commands is not required on the • UnifiedPOS Retail Peripheral Architecture*2
application side, efficient system development is
• Sample Program Guide
possible.
OPOS ADK for .NET: • OPOS ADK for .NET Installation Guide
3
OPOS ADK for .NET allows you to develop • UnifiedPOS Retail Peripheral Architecture*2
applications that are compatible with Microsoft POS • User's Reference (SetupPOS)
for .NET. • Application Development Guide
When developing applications, use a separate (POSPrinter TM-T88V)
development environment such as Microsoft Visual
Studio .NET.
JavaPOS ADK (Windows): JavaPOS ADK Installation Guide

JavaPOS ADK (Linux):
JavaPOS is the standard specification which defines
an architecture and device interface (API) to access
various POS devices from a Java based system. Using
JavaPOS standard API allows control with Java-based
applications of functions inherent to each device. A
flexible design with Java language and JavaPOS
enables many different types of computer systems,
such as stand alone or network configuration, to use
a same application. You can use JavaPOS to build
applications and drivers independently of platforms.
This allows flexible configurations using thin clients to
meet the system requirements.
79

Software Manual
TM Virtual Port Driver: TMCOMUSB Serial Emulation Driver User’s

This driver is a Serial-USB and Parallel-USB conversion Manual
driver to make an EPSON TM/BA/EU printer and DM-D
customer display connected via USB accessible from
a POS application through virtual COM ports and a
virtual LPT port.
Without making changes in the POS application that
controls devices connected through serial or parallel
interfaces, devices connected via USB can be
directly controlled with ESC/POS commands.
TM-T88V Mac Printer Driver: TM-T88V Mac Printer Driver User's Manual
Mac printer driver allows you to control the TM-T88V
using Common UNIX Printing System (CUPS) on Mac
OS X.
This is a full raster printer driver. It is able to print
images, text, and vector graphics etc., that an
application displays. With this driver many printer
controls are possible, such as paper cut timing
control, cash drawer control, printing speed control,
blank line skip, and upside-down printing. It also
provides API and dialogues for print setting, sample
applications, and logo setting utility.
Epson TM/BA Series Thermal Printer Driver: • Epson TM/BA Series Thermal Printer Driver
The Epson TM/BA Series Thermal Printer Driver allows Installation Manual
you to control the TM-T88V using Common UNIX • Epson TM/BA Series Thermal Printer Driver
Printing System (CUPS) on GNU/Linux. Manual
This is a full raster printer driver. It is able to print • TM-T88V Thermal Printer Driver Manual
images, text, and vector graphics etc., that an
application displays. With this driver many printer
control are possible, such as paper cut timing control,
cash drawer control, printing speed control, blank
line skip, and upside-down printing.
*1: OLE technology developed by Microsoft divides software into part blocks. The OPOS driver
is presupposed to be used with a development environment such as Visual Basic, unlike
ordinary Windows drivers. It is not a driver to be used for printing from commercial
applications.
*2: This guide describes general information on how to control printers using the OPOS ADK (in
the chapter “POS Printer” and “Appendix-A”). It does not describe Epson’s specific functions.
80

Utilities
Software Manual
TM-T88V Utility: • TM-T88V Software User’s Manual

Use for the following functions: • TM-T88V Utility User’s Manual
• Storing logos
• Font settings
• Communication I/F settings
• Printing control settings
• Paper reduction settings
• Automatic paper cut settings
• Operation check
• Setting backup/restore
TM-T88V Printer Model Setting Utility: • TM-T88V Software User’s Manual

Use to change the printer model name when you use
the TM-T88V with the APD Ver. 4.00 ~ 4.04.
TMNet WinConfig: • TMNet WinConfig User’s Guide

Use for IP address or wireless LAN setting. • UB-E02 Technical Reference Guide
• UB-R02/R03 Technical Reference Guide
EpsonNet Simple Viewer:

Use to monitor the network and the printer status.
EpsonNet Simple Viewer User’s Manual
3
TM / BA /EU Printer Remote Configuration Tool: TM / BA /EU Printer Remote Configuration
This is a package of EpsonNet Simple Viewer and TM- Tool User’s Manual
T88V Utility. A package of EpsonNet Simple Viewer and
First install this software in the computer with the TM-T88V Utility.
administrator's authority, and set up the firewall. Next,
install the printer driver in each client computer and
set up the firewall. Then you can check the status of
and configure the printer connected to a client
computer on the network from the computer with the
administrator's authority.
BMP File Converter: Readme.txt File

Use to convert the BMP image files used in Windows
into a data format which can be interpreted by
EPSON POS printers (TM series). Conversion to multi-
tone or black and white image command is possible.
After execution a binary file with the command string
is created.
81

How to Get Drivers, Manuals, and the Utility
Drivers, manuals, and the TM-T88V Utility can be installed by the TM-T88V installer in the
included the TM-T88V Software & Documents Disc.
You can also obtain them from one of the following URLs.
For customers in North America, go to the following web site:
http://www.epsonexpert.com/ and follow the on-screen instructions.
For customers in other countries, go to the following web site:
http://www.epson-pos.com/
82

Setting/Checking Modes
Besides the ordinary print mode, the printer has the following modes to set or check settings of
the printer.
• Self-test Mode
• Hexadecimal Dumping Mode
• NV Graphics Print Mode
• Receipt Enhancement Information Print Mode
• Memory Switch Setting Mode
Self-test Mode
You can confirm the following information by running the self-test mode. You can also set the
interface mode.
• Control circuit functions
• Printer mechanism
• Print quality
• ROM version
• Maintenance Information 3
• DIP switch settings
Follow the steps below to run this mode.
1 Close the roll paper cover.
2 While pressing the Feed button, turn on the printer. (Keep pressing the
Feed button until the printer starts printing.)
The printer starts printing current status of the printer.
With the LAN interface, before printing starts, it takes 6 seconds if the IP address is fixed
and 13 seconds if the IP address is obtained with the automatic setting. (It may take longer
depending on the response time from the host.)
When the printer finishes printing the printer status, the following message is printed and
the Paper LED flashes. (The printer is now in the self-test wait mode.):
“Select Modes by pressing Feed button.
Continue SELF-TEST: Less than 1 second
Mode Selection : 1 second or more”
83

3 Press the Feed button while the printer is in the self-test wait mode.
If you select the SELF-TEST, the printer prints a rolling pattern using only the built-in
character set.
If you select the mode selection, follow the instructions printed by the printer.
After printing the following message, the printer is initialized and returned to the normal mode.
“*** completed***”
84

Hexadecimal Dumping Mode

In the hexadecimal dumping mode, the printer prints the data transmitted from a host computer
in hexadecimal numbers and their corresponding characters.
• If there is no character corresponding to print data, “.” is printed.

• If print data is less than one line, press the Feed button to print the line.
• Applications that confirm printer status may not work correctly during the hexadecimal
dumping mode. The printer returns only the status for “Transmit real-time status.”
1 Open the roll paper cover.
2 While pressing the Feed button, turn on the printer.
The printer starts printing data received from then on in hexadecimal numbers and their
corresponding characters.
Printing example: 3
Hexadecimal Dump
To terminate hexadecimal dump,
press FEED button three times.
1B 21 00 1B 26 02 40 40 1B 69 . ! . . & . @ @ . i
1B 25 01 1B 63 34 00 1B 30 31 . % . . c 4 . . 0 1
41 42 43 44 45 46 47 48 49 4A A B C D E F G H I J
*** completed ***
Turn off the printer or press the Feed button three times to return to the normal mode.
85

NV Graphics Print Mode
You can confirm the following information by running NV graphics print mode:
• Capacity of the NV graphics
• Used amount of the NV graphics
• Unused capacity of the NV graphics
• Number of NV graphics that are registered
• Key code, number of dots in X direction, number of dots in Y direction, number of colors to be
defined.
• NV graphics data
For detailed information about NV graphics, see "NV Graphics Memory" on page 22.
2 While pressing the Feed button, turn on the printer. (Keep pressing the
The printer starts printing current status of the printer.
3 After the printing has been completed, press the Feed button for more
than one second.
The printer starts printing instructions.
4 After the printing has been completed, press the Feed button.
5 Then press the Feed button for more than one second.
Turn the power off and on to return to the normal mode.
86

Receipt Enhancement Information Print Mode

You can confirm the following information by running the R/E information mode:
• Automatic top logo setting
• Automatic bottom logo setting
• Extended settings for automatic top/bottom logo
2 While pressing the Feed button, turn the power on. (Keep pressing the
The printer prints current status of the printer.
than one second.
4 After the printing has been completed, press the Feed button twice. 3
Turn the power off and on to return to the normal mode.
87

Memory Switch Setting Mode
You can configure the memory switches (customized values) of the printer.
• Print density
• Communication conditions using a serial interface
• Auto reduction of the amount of paper to use
• Autocutting of paper while the cover is closed
• Paper width
• Default value of character code page/international character set
• Auto replacement of font
• Selection of an interface
• Selection of USB class
• Power supply capacity
For detailed information about memory switches (customized value), see "Setting the Mem-
ory Switches (Customized Value)" on page 48.
2 Turn on the printer while pressing the Feed button.

The printer prints current status of the printer.
than one second.
4 After the printing has been completed, press the Feed button three
times.
After one setting has been completed, the printer stores the setting and then starts initializing.
After that, the printer returns to the normal mode.
88

Chapter 4 Handling
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper

• Do not open the roll paper cover during printing.
The printer may be damaged.
WARNING • Do not touch the manual cutter with your hands when installing or replacing the
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
• Use roll paper that meets the printer specification. For details about paper specification,
see "Paper Specifications" on page 30.
• Paper must not be pasted to the roll paper spool.
1 Press the cover open lever to open the roll paper cover.
When the roll paper cover cannot be opened, see "Removing Jammed Paper" on page 91.
2 Remove the used roll paper core, if any.
89

3 Install the roll paper in the correct direction.
4 Pull out some roll paper, and close the roll paper cover.
5 Tear off the roll paper with the manual cutter.
90

Chapter 4 Handling
Removing Jammed Paper

When a paper jam occurs, never pull out the paper forcibly. Open the roll paper cover and
remove the jammed paper.
When the roll paper cover cannot be opened, follow the steps below to remove the jammed
paper.
Do not touch the thermal head (See"Cleaning the Thermal Head" on page 93.) because
it can be very hot after printing.
CAUTION
2 Slide the cutter cover toward the front to open it.
4
3 Turn the knob until you see a triangle in the opening.
This returns the cutter blade to the normal position. There is a label near the cutter to assist
you.
91

4 Close the cutter cover.
5 Open the roll paper cover and remove the jammed paper.
92

Chapter 4 Handling
Cleaning the Thermal Head

Epson recommends cleaning the thermal head periodically (generally every 3 months) to
maintain receipt print quality.
After printing, the thermal head can be very hot. Do not touch it and let it cool before
you clean it. Do not damage the thermal head by touching it with your fingers or any
CAUTION hard object.
Turn off the printer, open the roll paper cover, and clean the thermal elements of the thermal
head with a cotton swab moistened with an alcohol solvent (ethanol or IPA).
Thermal head
Depending on the roll paper used, paper dust may stick to the platen roller and roll paper end
4
sensor. To remove the paper dust, clean the platen roller and roll paper end sensor with a cotton
swab moistened with water. Turn on the printer power only after the water has completely
dried.
93

Preparing for Transport
Follow the steps below to transport the printer.
2 Remove the power supply connector.
3 Remove the roll paper.
4 Pack the printer upright.
94

Replacement of the TM-T88IV

The TM-T88V is designed so that it can smoothly replace the TM-T88IV. This chapter describes
precautions for the replacement.
Compatibility
Printing
The printing and character specifications are the same as those of the TM-T88IV. Without special
configurations, the TM-T88V prints the same results as the TM-T88IV prints.
Print Density
The print density of the TM-T88V can be set with DIP switches (2-3/2-4) as can the TM-T88IV.
Set the density the same as for the TM-T88IV to print in the same print density.
The print density can be set also with a customized value. The initial setting of the
changed, the value set with the customized value is enabled. (See "Setting the Memory
Switches (Customized Value)" on page 48.)
Two-Color Printing
You cannot use the paper for two-color printing (P320RB/P320BB) with the TM-T88V, which you
can use with the TM-T88IV.
5
Number of Head Energizing Parts
For the TM-T88V, the initial setting of the number of head energizing parts is “One-part
energizing.” You can change the setting with the customized value (See "Setting the Memory
Switches (Customized Value)" on page 48.); however it does not usually need to be changed.
TM-T88V TM-T88IV
• One-part energizing • One-part energizing

• Two-part energizing • Two-part energizing
Number of head energizing part
• Four-part energizing • Four-part energizing
• Auto energizing
95

Printable Area (for 80 mm Width Paper)
The printable area (left/right margins, print start position from the autocutting position, print
start position from the manual cutting position) of the TM-T88V is the same as that of the
TM-T88IV.
Cutting Method
The TM-T88V uses the partial cutting method (cutting with one point in left edge left uncut) as
does the TM-T88IV.
Manual Paper Feed

Manual paper feed is not possible with the TM-T88V while it is possible with the TM-T88IV after
printing pauses.
Receive Buffer
You can set the receive buffer of the TM-T88V to 4KB or 45 bytes with DIP switch 1-2 as with the
TM-T88IV. The buffer full condition and buffer full release condition of the TM-T88V are the
same as those of the TM-T88IV.
Memory Capacity
The sizes of the download buffer and NV graphics data of the TM-T88V are the same as those of
the TM-T88IV.
Electrical Characteristics
The operating voltage of the TM-T88V is DC24 ± 7%, the same as the TM-T88IV. The current
consumption differs, depending on the print duty.
The TM-T88V does not have a low power consumption mode, which the TM-T88IV has, so
you cannot set DIP switches 2-3 and 2-4 to on. Use the newly added low power load mode
instead.
96

DIP Switches
The functional assignments of DIP switches are the same as those of the TM-T88IV except for
DIP switches 2-3 and 2-4.
Since the TM-T88V does not have a low power consumption mode, do not set DIP switches 2-3
and 2-4 both to ON.
Printer Status
The TM-T88V goes to the same status under the same conditions as the TM-T88IV. You can
replace the TM-T88V with the TM-T88IV without modifying applications.
Logo Registration
The TM-T88V can register logos in the NV memory (NVRAM) with the TM-T88V Utility, while
the TM-T88IV can register logos with the TM Flash LOGO Setup Utility for NVRAM (TM-Flogo).
Driver Compatibility
You can operate the TM-T88V with a driver for the TM-T88IV or the TM-T88III.
You cannot operate the TM-T88IV with a driver for the TM-T88V.
Advanced Printer Driver

When the TM-T88IV was controlled by APD Ver. 4.00 ~ 4.04, you need to change the TM-T88V
printer model name to “TM-T88IV” using the customized value. (See "Setting the Memory
Switches (Customized Value)" on page 48.)
5
When the TM-T88IV was controlled by an APD other than Ver. 4.00 ~ 4.04, you can replace it
with the TM-T88V without modifying the APD.
OPOS ADK
If the TM-T88IV was controlled by an OPOS ADK, you can replace it with the TM-T88V without
modifying the OPOS ADK.
97

USB Low Power Consumption Mode
With the TM-T88V, you can enable the USB low power consumption mode with DIP Switch 1-8,
just as you can with the TM-T88IV. (See "For Ethernet/Wireless LAN/USB Interface" on page
44.)
Maintenance Counter
The TM-T88V has a maintenance counter just as the TM-T88IV has.
Buzzer
TM-T88V is available with a built-in buzzer or without the buzzer. Even if you purchase the one
without the buzzer, you can attach an optional external buzzer. You can beep the buzzer with the
pulse signal using a command. (See "Setting the Internal Buzzer (for Model with an Internal
Buzzer)" on page 65, "Connecting the Optional External Buzzer" on page 66.)
Programming Guide.
Power Supply Box

The optional power supply box (OT-BX88V) is available to be attached under the TM-T88V to
hold the power unit, just as the OT-BX88 has been available for the TM-T88IV.
98

Overall Dimensions
You can place the TM-T88V in the same location as the TM-T88IV, since its overall dimensions
and weight are about the same as or smaller than those of the TM-T88IV. With the wall hanging
bracket (WH-10), you can attach the TM-T88V to a wall just as you can with the TM-T88IV.
TM-T88V TM-T88IV
W:145 × D:195 × H:148 mm Approximately 1.6kg W:148 × D:145 × H:195 Approximately 1.8kg
{W:5.71" × D:7.68" × H:5.83" Approximately 3.53 lb} {W:5.71" × D:7.68" × H:5.83" Approximately 3.97 lb}
145 145
141 141 5

99

Additional Functions and Functional Improvements
Paper Width
You can change the printer to print on 58 mm width paper by installing the roll paper guide and
changing the paper width setting with the customized value.
Once you change the paper width form 80 mm to 58 mm, you cannot change it back to 80
mm.
Print Speed
The TM-T88V has increased its print speed up to a maximum of 300 mm/s.
TM-T88V TM-T88IV
Maximum print speed 300 mm/s 200 mm/s
Print speed setting

Level 1 to 13 Level 1 to 9
(Customized value)
Note: When the printer prints text (built-in fonts) with the default print density level at 24V and
25°C {77°F}.
Depending on print conditions such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted.
Barcodes
With the TM-T88V, printing the following barcodes, two-dimensional symbols and composite
symbology is additionally possible.
• GS1-128
• GS1 DataBar Omnidirectional
• GS1 DataBar Truncated
• GS1 DataBar Stacked
• GS1 DataBar Stacked Ominidirectional
• GS1 DataBar Limited
• GS1 DataBar Expanded
• GS1 DataBar Expanded Stacked
• MaxiCode
• Composite Symbology
100

Number of Characters
For the TM-T88V, character code tables and international characters are added.
TM-T88V TM-T88IV
128 × 43 pages 128 × 11 pages

Character code tables
(including user-defined page) (including user-defined page)
International characters 18 sets 14 sets
Image Tone Setting

TM-T88V allows you to specify tone of images (2 tones/Grayscale).
Interface
The USB interface is added to the main unit of the TM-T88V as standard equipment.
USB Class
When using the built-in USB interface or USB Plus Power, USB printer class can be used beside
the USB vendor-defined class. This setting can be done in customized value. (See "Setting the
Memory Switches (Customized Value)" on page 48.)
101

Customized Value
For the TM-T88V, the following customized value functions are added.
• Paper width
• Multi-tone print density
• Initial value of the character code table
• Initial value of the international character set
• Optional buzzer
• USB class
• Interface mode
• Power supply unit capacity
• Automatic paper cut when the cover is closed
• Automatic paper-saving (upper space reduction)
• Automatic paper-saving (lower space reduction)
• Automatic paper-saving (line space reduction rate)
• Automatic paper-saving (line feed reduction rate)
• Automatic paper-saving (barcode height reduction rate)
• Font A replacement
• Font B replacement
• Printer model
For the TM-T88V, the following customized value functions are deleted.
• Single-color printing/two-color printing
• Black-color density in two-color printing
For detailed information about the customized value, see"Setting the Memory Switches
(Customized Value)" on page 48.
R/E Information Printing Mode

The TM-T88V has a Receipt Enhancement (R/E) Information Printing mode that lets you
confirm the following information:
• Automatic top logo setting
• Automatic bottom logo setting
• Extended settings for automatic top/bottom logo
102

Low Power Load Mode

For the TM-T88V, there is a new low power load mode. In this mode, the power supply load is
lowered by automatically changing the print speed, depending on the print duty. You can set the
mode with the customized value. (See "Setting the Memory Switches (Customized Value)" on
page 48.)
Reliability
The TM-T88V has improved reliability.
TM-T88V TM-T88IV
Printer mechanism 20 million lines 15 million lines
Life Print head 150 million pulse, 150 km 100 million pulse, 100 km
Autocutter 2 million cuts 1.5 million cuts
MCBF 70 million lines 52 million lines
103

104

Appendix
Appendix
Specifications of Interfaces and Connectors
For detailed information about LAN or wireless LAN, see one of the following:
• LAN: UB-E02 Technical Reference Guide
• Wireless LAN: UB-R02/R03 Technical Reference Guide
RS-232 Serial Interface
Interface board specifications (RS-232-compliant)

Item Specifications
Data transfer method Serial
Synchronization Asynchronous
Handshake Select one of the following with DIP switch 1-3:
• DTR/DSR • XON/XOFF
Signal level MARK -3V to -15V logic “1”/OFF
SPACE +3V to +15V logic “0”/ON
Bit length Select one of the following with DIP switch 1-4:
• 7 bit • 8 bit
Transmission speed • Select one of the following with DIP switch 1-7/1-8:
[bps: bits per second] 4800/9600/19200/38400 bps
• Select one of the following with commands:
2400/4800/9600/19200/38400/57600/115200 bps
Parity check Select one of the following with DIP switch 1-5:
• Yes • No
Parity selection Select one of the following with DIP switch 1-6:
• Even • Odd
Stop bit 1 or more bits

However, the stop bit for data transfer from the printer is fixed to 1 bit.
Connector Printer side DSUB 25-pin (female) connector
105

Functions of each connector pin
Pin no. Signal name Signal direction Function
1 FG — Frame ground
2 TXD Output Transmission data
3 RXD Input Reception data
4 RTS Output Equivalent to DTR signal (pin 20)
6 DSR Input This signal indicates whether the host computer can
receive data.
SPACE indicates that the host computer can receive
data. MARK indicates that the host computer
cannot receive data.
When DTR/DSR control is selected, the printer
transmits data after confirming this signal (except if
transmitted using some ESC/POS commands).
When XON/XOFF control is selected, the printer does
not check this signal.
Changing DIP switch 2-7 lets this signal be used as a
printer reset signal.
When you use this signal as the printer’s reset signal,
the printer is reset when the signal remains MARK for
a pulse width of 1 ms or more.
7 SG — Signal ground
20 DTR Output 1) When DTR/DSR control is selected, this signal

indicates whether the printer is BUSY.
• SPACE status
Indicates that the printer is ready to receive data.
• MARK status
Indicates that the printer is BUSY. Set BUSY conditions
with DIP switch 2-1.
2) When XON/XOFF control is selected, the signal
indicates that the printer is properly connected and
ready to receive data from the host. The signal is
always SPACE, except in the following cases:
• During the period from when power is turned on to
when the printer is ready to receive data.
• During the self-test.
25 INT Input Changing DIP switch 2-8 enables this signal to be

used as a reset signal for the printer. The printer is
reset if the signal remains at SPACE for a pulse width
of 1 ms or more.
106

Appendix
XON/XOFF
When XON/XOFF control is selected, the printer transmits the XON or XOFF signals as follows.
The transmission timing of XON/XOFF differs, depending on the setting of DIP switch 2-1.
DIP switch 2-1

Signal Printer status
1 (ON) 0 (OFF)
XON 1) When the printer goes online after turning on the power (or Transmit Transmit
reset using the interface)
2) When the receive buffer is released from the buffer full state Transmit Transmit
3) When the printer switches from offline to online — Transmit
4) When the printer recovers from an error using some ESC/POS — Transmit
commands
XOFF 5) When the receive buffer becomes full Transmit Transmit
6) When the printer switches from online to offline — Transmit
Code
The hexadecimal numbers corresponding to the XON/XOFF codes are shown below.
• XON code: 11H
• XOFF code: 13H
• When the printer goes from offline to online and the receive buffer is full, XON is not
transmitted.
CAUTION • When the printer goes from online to offline and the receive buffer is full, XOFF is not
transmitted.
• When DIP switch 1-3 is off, XON is not transmitted as long as the printer is offline, even
if a receive buffer full state has been cleared.
107

IEEE 1284 Parallel Interface
Modes
The IEEE 1284 parallel interface supports the following two modes.
Mode Communication direction Other information
Compatibility mode Host →Printer communication Centronics-compliant
Reverse mode Printer →Host communication Assumes a data transfer from an

asynchronous printer
Compatibility Mode
Compatibility mode allows data transmission from host to printer only: Centronics-compatible.
Specification
Data transmission 8-bit parallel
Synchronization Externally supplied STROBE signals
Handshaking ACK and BUSY signals
Signal levels TTL-compatible connector
Connector ADS-B36BLFDR176 (HONDA) or equivalent product
Reverse communication Nibble or byte mode
Reverse Mode
The transfer of status data from the printer to the host proceeds in the nibble or byte mode.
This mode allows data transfer from an asynchronous printer under the control of the host. Data
transfers in the nibble mode are made via the existing control lines in units of four bits (a nibble).
In the byte mode, data transfer proceeds by making the 8-bit data lines bidirectional. Both modes
fail to proceed concurrently in the compatibility mode, thereby causing half-duplex
transmission.
108

Appendix
Interface signals
Compatibility
Pin Source Nibble Mode Byte Mode
Mode
1 Host Strobe HostClk HostClk
2 Host/Ptr Data0 (LSB) Data0 (LSB) Data0 (LSB)
3 Host/Ptr Data1 Data1 Data1
9 Host/Ptr Data7 (MSB) Data7 (MSB) Data7 (MSB)
10 Printer Ack PtrClk PtrClk
11 Printer Busy PtrBusy/Data3,7 PtrBusy
12 Printer Perror AckDataReq/Data2,6 AckDataReq
13 Printer Select Xflag/Data1,5 Xflag
14 Host AutoFd HostBusy k HostBusy
15 NC ND ND
16 GND GND GND
17 FG FG FG
18 Printer Logic-H Logic-H Logic-H
19 GND GND GND
20 GND GND GND
21 GND GND GND
22 GND GND GND
23 GND GND GND
24 GND GND GND
25 GND GND GND
26 GND GND GND
27 GND GND GND
109

Compatibility
Pin Source Nibble Mode Byte Mode
Mode
28 GND GND GND
29 GND GND GND
30 GND GND GND
31 Host Init Init Init
32 Printer Fault DataAvail/Data0,4 DataAvail
33 GND ND ND
34 Printer DK_STATUS ND ND
35 Printer +5V ND ND
36 Host SelectIn 1284-Active 1284-Active
NC: Not Connected

ND: Not Defined
• A signal name with a rule above it indicates an “L” active signal.

• Bidirectional communications cannot take place, unless all signal names for both sides
CAUTION correspond to each other.
• Connect all signal lines using a twisted-pair cable. Connect the return side to the signal
ground level.
• Make sure the signals satisfy electrical characteristics.
• Set the leading edge and trailing edge times to 0.5ms or less.
• Do not ignore Ack or BUSY signals during a data transfer. Ignoring such signals may
result in data corruption.
• Make the interface cables as short as possible.
110

Appendix
USB (Universal Serial Bus) Interface
Outline
• Full-speed transmission at 12 Mbps [bps: bits per second]
• Plug & Play, Hot Insertion & Removal
USB transmission specifications

USB function
Overall specifications According to USB 2.0 specifications
Transmission speed USB Full-Speed (12 Mbps)
Transmission method USB bulk transmission method
Power supply specifications USB self power supply function
Current consumed by USB bus 0 mA
USB packet size (with full-speed connection)
USB bulk OUT (TM) 64 bytes
USB bulk IN (TM) 64 bytes
Status transmission from printer with USB interface

In order to ensure that there is no lack of status data, it is necessary to periodically retrieve status
data at the host computer.
Unlike RS 232C transmission, it cannot spontaneously interrupt data transmission to the host
computer.
The printer has a 128-byte status data buffer. Statuses that exceed the buffer capacity are
canceled.
111

Character Code Tables
• The character code tables show only character configurations. They do not show the
actual print pattern.
• “SP” in the table shows a space.
Common to All Pages

When International character set (See "International Character Sets" on page 156.) is USA:
HEX 0 1 2 3 4 5 6 7
0 NUL DLE SP 0 @ P ` p
00 16 32 48 64 80 96 112
1 XON ! 1 A Q a q
01 17 33 49 65 81 97 113
2 " 2 B R b r
02 18 34 50 66 82 98 114
3 XOFF # 3 C S c s
03 19 35 51 67 83 99 115
4 EOT DC4 $ 4 D T d t
04 20 36 52 68 84 100 116
5 ENQ NAK % 5 E U e u
05 21 37 53 69 85 101 117
6 ACK & 6 F V f v
06 22 38 54 70 86 102 118
7 ' 7 G W g w
07 23 39 55 71 87 103 119
8 CAN ( 8 H X h x
08 24 40 56 72 88 104 120
9 HT ) 9 I Y i y
09 25 41 57 73 89 105 121
A LF ∗ : J Z j z
10 26 42 58 74 90 106 122
B ESC + ; K [ k {
11 27 43 59 75 91 107 123
C FF FS , < L ¥ l |
12 28 44 60 76 92 108 124
D CR GS - = M ] m }
13 29 45 61 77 93 109 125
E RS . > N ^ n ~
14 30 46 62 78 94 110 126
F / ? O _ o SP
15 31 47 63 79 95 111 127
112

Appendix
Page 0 [PC437: USA, Standard Europe]
HEX 8 9 A B C D E F
0 Ç É á ░ └ ╨ α ≡
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ ╤ β ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ ╥ Γ ≥
130 146 162 178 194 210 226 242
3 â ô ú │ ├ ╙ π ≤
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ ╘ Σ ⌠
132 148 164 180 196 212 228 244
5 à ò Ñ ╡ ┼ ╒ σ ⌡
133 149 165 181 197 213 229 245
a
6 å û ╢ ╞ ╓ μ ÷
134 150 166 182 198 214 230 246
7 ç ù o
╖ ╟ ╫ τ ≈
135 151 167 183 199 215 231 247
8 ê ÿ ¿ ╕ ╚ ╪ Ф °
136 152 168 184 200 216 232 248
9 ë Ö ┌ ╣ ╔ ┘ Θ •
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Ω ·
138 154 170 186 202 218 234 250
B ï ¢ ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ∞ n
140 156 172 188 204 220 236 252

D ì ¥ ¡ ╜ ═ ▌ Φ ²
141 157 173 189 205 221 237 253
E Ä Pt « ╛ ╬ ▐ ε ■
142 158 174 190 206 222 238 254
F Å ƒ » ┐ ╧ ▀ ∩ SP
143 159 175 191 207 223 239 255
113

Page 1 (Katakana)
HEX 8 9 A B C D E F
0 ‫ؤ‬ ┴ SP 㩊㩚 ═ ‫ؖ‬
128 144 160 176 192 208 224 240
1 ‫إ‬ ┬ 㨫㨻㩋㩛 ╞ ౞
129 145 161 177 193 209 225 241
2 ‫ا‬ ┤ 㨬㨼㩌㩜 ╪ ᐕ
130 146 162 178 194 210 226 242
3 ‫ئ‬ ├ 㨭㨽㩍㩝 ╡ ᦬
131 147 163 179 195 211 227 243
4 ‫ب‬ ¯ 㨮㨾㩎㩞 ‫ٻ‬ ᣣ
132 148 164 180 196 212 228 244
5 ‫ة‬ ─ 㨯㨿㩏㩟 ‫ټ‬ ᤨ
133 149 165 181 197 213 229 245
6 ‫ت‬ │ 㨰㩀㩐㩠 ‫پ‬ ಽ
134 150 166 182 198 214 230 246
7 ‫ث‬ │ 㨱㩁㩑㩡 ‫ٽ‬ ⑽
135 151 167 183 199 215 231 247
8 ‫ز‬ ┌ 㨲㩂㩒㩢 ♠ ‫ޥ‬
136 152 168 184 200 216 232 248
9 ‫ر‬ ┐ 㨳㩃㩓㩣 ♥ Ꮢ
137 153 169 185 201 217 233 249
A ‫ذ‬ └ 㨴㩄㩔㩤 ♦ ඙
138 154 170 186 202 218 234 250
B ‫د‬ ┘ 㨵㩅㩕㩥 ♣ ↸
139 155 171 187 203 219 235 251
C ‫خ‬ ؐ 㨶㩆㩖㩦 ● ᧛
140 156 172 188 204 220 236 252
D ‫ح‬ ؑ 㨷㩇㩗㩧 ○ ੱ
141 157 173 189 205 221 237 253
E ‫ج‬ ؓ 㨸㩈㩘㩨 ؔ ▓
142 158 174 190 206 222 238 254
F ┼ ؒ 㨹㩉㩙㩩 ؕ SP
143 159 175 191 207 223 239 255
114

Appendix
Page 2 (PC850: Multilingual)
HEX 8 9 A B C D E F
0 Ç É á ░ └ ð Ó -
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ Ð β ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ Ê Ô
130 146 162 178 194 210 226 242
3 â ô ú │ ├ Ë Ò ¾
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ È õ ¶
132 148 164 180 196 212 228 244
5 à ò Ñ Á ┼ ı Õ §
133 149 165 181 197 213 229 245
6 å û a
Â ã Í μ ÷
134 150 166 182 198 214 230 246
7 ç ù o
À Ã Î þ ¸
135 151 167 183 199 215 231 247
8 ê ÿ ¿ © ╚ Ï Þ °
136 152 168 184 200 216 232 248
9 ë Ö ® ╣ ╔ ┘ Ú ¨
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Û ·
138 154 170 186 202 218 234 250
B ï ø ½ ╗ ╦ █ Ù ¹
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ý ³
140 156 172 188 204 220 236 252
D ì Ø ¡ ¢ ═ ¦ Ý ²
141 157 173 189 205 221 237 253
E Ä × « ¥ ╬ Ì ¯ ■
142 158 174 190 206 222 238 254
F Å ƒ » ┐ ¤ ▀ ´ SP
143 159 175 191 207 223 239 255
115

Page 3 (PC860: Portuguese)
HEX 8 9 A B C D E F
0 Ç É á ░ └ ╨ α ≡
128 144 160 176 192 208 224 240
1 ü À í ▒ ┴ ╤ β ±
129 145 161 177 193 209 225 241
2 é È ó ▓ ┬ ╥ Γ ≥
130 146 162 178 194 210 226 242
3 â ô ú │ ├ ╙ π ≤
131 147 163 179 195 211 227 243
4 ã õ ñ ┤ ─ ╘ Σ ⌠
132 148 164 180 196 212 228 244
5 à ò Ñ ╡ ┼ ╒ σ ⌡
133 149 165 181 197 213 229 245
a
6 Á Ú ╢ ╞ ╓ μ ÷
134 150 166 182 198 214 230 246
7 ç ù o
╖ ╟ ╫ τ ≈
135 151 167 183 199 215 231 247
8 ê Ì ¿ ╕ ╚ ╪ Ф °
136 152 168 184 200 216 232 248
9 Ê Õ Ò ╣ ╔ ┘ Θ •
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Ω ·
138 154 170 186 202 218 234 250
B Í ¢ ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
n
C Ô £ ¼ ╝ ╠ ▄ ∞
140 156 172 188 204 220 236 252
D ì Ù ¡ ╜ ═ ▌ Φ ²
141 157 173 189 205 221 237 253
E Ã Pt « ╛ ╬ ▐ ε ■
142 158 174 190 206 222 238 254
F Â Ó » ┐ ╧ ▀ ∩ SP
143 159 175 191 207 223 239 255
116

Appendix
Page 4 (PC863: Canadian-French)
HEX 8 9 A B C D E F
0 Ç É ¦ ░ └ ╨ α ≡
128 144 160 176 192 208 224 240
1 ü È ´ ▒ ┴ ╤ β ±
129 145 161 177 193 209 225 241
2 é Ê ó ▓ ┬ ╥ Γ ≥
130 146 162 178 194 210 226 242
3 â ô ú │ ├ ╙ π ≤
131 147 163 179 195 211 227 243
4 Â Ë ¨ ┤ ─ ╘ Σ ⌠
132 148 164 180 196 212 228 244
5 à Ï ¸ ╡ ┼ ╒ σ ⌡
133 149 165 181 197 213 229 245
6 ¶ û ³ ╢ ╞ ╓ μ ÷
134 150 166 182 198 214 230 246
7 ç ù ¯ ╖ ╟ ╫ τ ≈
135 151 167 183 199 215 231 247
8 ê ¤ Î ╕ ╚ ╪ Ф °
136 152 168 184 200 216 232 248
┌
9 ë Ô ╣ ╔ ┘ Θ •
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Ω ·
138 154 170 186 202 218 234 250
B ï ¢ ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ∞ n
140 156 172 188 204 220 236 252

D Ù ¾ ╜ ═ ▌ Φ ²
141 157 173 189 205 221 237 253
E À Û « ╛ ╬ ▐ ε ■
142 158 174 190 206 222 238 254
F § ƒ » ┐ ╧ ▀ ∩ SP
143 159 175 191 207 223 239 255
117

Page 5 (PC865: Nordic)
HEX 8 9 A B C D E F
0 Ç É á ░ └ ╨ α ≡
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ ╤ β ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ ╥ Γ ≥
130 146 162 178 194 210 226 242
3 â ô ú │ ├ ╙ π ≤
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ ╘ Σ ⌠
132 148 164 180 196 212 228 244
5 à ò Ñ ╡ ┼ ╒ σ ⌡
133 149 165 181 197 213 229 245
a
6 å û ╢ ╞ ╓ μ ÷
134 150 166 182 198 214 230 246
7 ç ù o
╖ ╟ ╫ τ ≈
135 151 167 183 199 215 231 247
8 ê ÿ ¿ ╕ ╚ ╪ Ф °
136 152 168 184 200 216 232 248
┌
9 ë Ö ╣ ╔ ┘ Θ •
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Ω ·
138 154 170 186 202 218 234 250
B ï ø ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ∞ n
140 156 172 188 204 220 236 252

D ì Ø ¡ ╜ ═ ▌ Φ ²
141 157 173 189 205 221 237 253
E Ä Pt « ╛ ╬ ▐ ε ■
142 158 174 190 206 222 238 254
F Å ƒ ¤ ┐ ╧ ▀ ∩ SP
143 159 175 191 207 223 239 255
118

Appendix
Page 11 (PC851: Greek)
HEX 8 9 A B C D E F
0 Ç Ί ϊ ░ └ Τ ζ -
128 144 160 176 192 208 224 240
1 ü SP ΐ ▒ ┴ Υ η ±
129 145 161 177 193 209 225 241
2 é Ό ó ▓ ┬ Ф θ υ
130 146 162 178 194 210 226 242
3 â ô ύ │ ├ Χ ι Φ
131 147 163 179 195 211 227 243
4 ä ö А ┤ ─ Ψ κ χ
132 148 164 180 196 212 228 244
5 à Ύ Β Κ ┼ Ω λ §
133 149 165 181 197 213 229 245
6 Ά û Γ Λ Π α μ ψ
134 150 166 182 198 214 230 246
7 ç ù Δ Μ Р β ν ¸
135 151 167 183 199 215 231 247
8 ê Ώ Е Ν ╚ γ ξ °
136 152 168 184 200 216 232 248
9 ë Ö Ζ ╣ ╔ ┘ ο ¨
137 153 169 185 201 217 233 249
A è Ü Η ║ ╩ ┌ π ω
138 154 170 186 202 218 234 250
B ï ά ½ ╗ ╦ █ р ϋ
139 155 171 187 203 219 235 251
C î £ Θ ╝ ╠ ▄ σ ΰ
140 156 172 188 204 220 236 252
D Έ έ Ι ≡ ═ δ ς ώ
141 157 173 189 205 221 237 253
E Ä ή « Ο ╬ ε τ ■
142 158 174 190 206 222 238 254
F Ή ί » ┐ Σ ▀ ´ SP
143 159 175 191 207 223 239 255
119

Page 12 (PC853: Turkish)
HEX 8 9 A B C D E F
0 Ç É á ░ └ SP Ó -
128 144 160 176 192 208 224 240
1 ü ċ í ▒ ┴ SP β SP
129 145 161 177 193 209 225 241
2 é Ċ ó ▓ ┬ Ê Ô ℓ
130 146 162 178 194 210 226 242
3 â ô ú │ ├ Ë Ò ŉ
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ È Ġ ˘
132 148 164 180 196 212 228 244
5 à ò Ñ Á ┼ ı ġ §
133 149 165 181 197 213 229 245
6 ĉ û Ğ Â Ŝ Í μ ÷
134 150 166 182 198 214 230 246
7 ç ù ğ À ŝ Î Ħ ¸
135 151 167 183 199 215 231 247
8 ê İ Ĥ Ş ╚ Ï ħ °
136 152 168 184 200 216 232 248
9 ë Ö ĥ ╣ ╔ ┘ Ú ¨
137 153 169 185 201 217 233 249
A è Ü SP ║ ╩ ┌ Û ˙
138 154 170 186 202 218 234 250
B ï ĝ ½ ╗ ╦ █ Ù SP
139 155 171 187 203 219 235 251
C î £ Ĵ ╝ ╠ ▄ Ŭ ³
140 156 172 188 204 220 236 252
D ì Ĝ ş Ż ═ SP ŭ ²
141 157 173 189 205 221 237 253
E Ä × « ż ╬ Ì · ■
142 158 174 190 206 222 238 254
F Ĉ ĵ » ┐ ¤ ▀ ´ SP
143 159 175 191 207 223 239 255
120

Appendix
Page 13 (PC857: Turkish)
HEX 8 9 A B C D E F
o
0 Ç É á ░ └ Ó -
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ a
β ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ Ê Ô SP
130 146 162 178 194 210 226 242
3 â ô ú │ ├ Ë Ò ¾
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ È õ ¶
132 148 164 180 196 212 228 244
5 à ò Ñ Á ┼ € Õ §
133 149 165 181 197 213 229 245
6 å û Ğ Â ã Í μ ÷
134 150 166 182 198 214 230 246
7 ç ù ğ À Ã Î SP ¸
135 151 167 183 199 215 231 247
8 ê İ ¿ © ╚ Ï × °
136 152 168 184 200 216 232 248
9 ë Ö ® ╣ ╔ ┘ Ú ¨
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Û ·
138 154 170 186 202 218 234 250
B ï ø ½ ╗ ╦ █ Ù ¹
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ì ³
140 156 172 188 204 220 236 252
D ı Ø ¡ ¢ ═ ¦ ÿ ²
141 157 173 189 205 221 237 253
E Ä Ş « ¥ ╬ Ì ¯ ■
142 158 174 190 206 222 238 254
F Å ş » ┐ ¤ ▀ ´ SP
143 159 175 191 207 223 239 255
121

HEX 8 9 A B C D E F
0 А Р ι ░ └ ╨ ω Ώ
128 144 160 176 192 208 224 240
1 В Σ κ ▒ ┴ ╤ ά ±
129 145 161 177 193 209 225 241
2 Г Т λ ▓ ┬ ╥ έ ≥
130 146 162 178 194 210 226 242
3 Δ Υ μ │ ├ ╙ ή ≤
131 147 163 179 195 211 227 243
4 Е Ф ν ┤ ─ ╘ ϊ Ï
132 148 164 180 196 212 228 244
5 Ζ Х ξ ╡ ┼ ╒ ί Ÿ
133 149 165 181 197 213 229 245
6 Η Ψ ο ╢ ╞ ╓ ó ÷
134 150 166 182 198 214 230 246
7 Θ Ω π ╖ ╟ ╫ ύ ≈
135 151 167 183 199 215 231 247
8 Ι α р ╕ ╚ ╪ ϋ °
136 152 168 184 200 216 232 248
9 Κ β σ ╣ ╔ ┘ ώ •
137 153 169 185 201 217 233 249
A Λ γ ς ║ ╩ ┌ Ά ·
138 154 170 186 202 218 234 250
B Μ δ τ ╗ ╦ █ Έ √
139 155 171 187 203 219 235 251
n
C Ν ε υ ╝ ╠ ▄ Ή
140 156 172 188 204 220 236 252
D ≡ ζ Φ ╜ ═ ▌ Ί ²
141 157 173 189 205 221 237 253
E О η χ ╛ ╬ ▐ Ό ■
142 158 174 190 206 222 238 254
F П θ ψ ┐ ╧ ▀ Ύ SP
143 159 175 191 207 223 239 255
122

Appendix
Page 15 (ISO8859-7: Greek)
HEX 8 9 A B C D E F
0 SP SP SP ° ΐ Π ΰ π
128 144 160 176 192 208 224 240
1 SP SP ‘ ± Α Р α р
129 145 161 177 193 209 225 241
2 SP SP ’ ² Β SP β ς
130 146 162 178 194 210 226 242
3 SP SP £ ³ Γ Σ γ σ
131 147 163 179 195 211 227 243
4 SP SP € ´ Δ Τ δ τ
132 148 164 180 196 212 228 244
5 SP SP Dp ΅ Ε Υ ε υ
133 149 165 181 197 213 229 245
6 SP SP ¦ Ά Ζ Ф ζ φ
134 150 166 182 198 214 230 246
7 SP SP § • Η Χ η χ
135 151 167 183 199 215 231 247
8 SP SP ¨ Έ Θ Ψ θ ψ
136 152 168 184 200 216 232 248
9 SP SP © Ή Ι Ω ι ω
137 153 169 185 201 217 233 249
A SP SP ˛ Ί Κ Ϊ κ ϊ
138 154 170 186 202 218 234 250
B SP SP « » Λ Ϋ λ ϋ
139 155 171 187 203 219 235 251
C SP SP ¬ Ό Μ ά μ ό
140 156 172 188 204 220 236 252
D SP SP - ½ Ν έ ν ύ
141 157 173 189 205 221 237 253
E SP SP SP Ύ Ξ ή ξ ώ
142 158 174 190 206 222 238 254
F SP SP — Ώ Ο ί ο SP
143 159 175 191 207 223 239 255
123

Page 16 (WPC1252)
HEX 8 9 A B C D E F
0 € SP SP ° À Ð à ð
128 144 160 176 192 208 224 240
1 SP ‘ ¡ ± Á Ñ á ñ
129 145 161 177 193 209 225 241
2 ‚ ’ ¢ ² Â Ò â ò
130 146 162 178 194 210 226 242
3 ƒ “ £ ³ Ã Ó ã ó
131 147 163 179 195 211 227 243
4 „ ” ¤ ´ Ä Ô ä ô
132 148 164 180 196 212 228 244
5 … • ¥ μ Å Õ å õ
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Æ Ö æ ö
134 150 166 182 198 214 230 246
7 ‡ — § · Ç × ç ÷
135 151 167 183 199 215 231 247
8 ˆ ˜ ¨ ¸ È Ø è ø
136 152 168 184 200 216 232 248
9 ‰ ™ © ¹ É Ù é ù
137 153 169 185 201 217 233 249
a o
A Š š Ê Ú ê ú
138 154 170 186 202 218 234 250
B ‹ › « » Ë Û ë û
139 155 171 187 203 219 235 251
C Œ œ ¬ ¼ Ì Ü ì ü
140 156 172 188 204 220 236 252
D SP SP - ½ Í Ý í ý
141 157 173 189 205 221 237 253
E Ž ž ® ¾ Î Þ î þ
142 158 174 190 206 222 238 254
F SP Ÿ ¯ ¿ Ï β ï ÿ
143 159 175 191 207 223 239 255
124

Appendix
Page 17 (PC866: Cyrillic #2)
HEX 8 9 A B C D E F
0 А Р а ░ └ ╨ р Ё
128 144 160 176 192 208 224 240
1 Б С б ▒ ┴ ╤ с ё
129 145 161 177 193 209 225 241
2 В Т в ▓ ┬ ╥ т Є
130 146 162 178 194 210 226 242
3 Г У г │ ├ ╙ у є
131 147 163 179 195 211 227 243
4 Д Ф д ┤ ─ ╘ ф Ї
132 148 164 180 196 212 228 244
5 Е Х е ╡ ┼ ╒ х ї
133 149 165 181 197 213 229 245
6 Ж Ц ж ╢ ╞ ╓ ц Ў
134 150 166 182 198 214 230 246
7 З Ч з ╖ ╟ ╫ ч ў
135 151 167 183 199 215 231 247
8 И Ш и ╕ ╚ ╪ ш °
136 152 168 184 200 216 232 248
9 Й Щ й ╣ ╔ ┘ щ •
137 153 169 185 201 217 233 249
A К Ъ к ║ ╩ ┌ ъ ·
138 154 170 186 202 218 234 250
B Л Ы л ╗ ╦ █ ы √
139 155 171 187 203 219 235 251
C М Ь м ╝ ╠ ▄ ь №
140 156 172 188 204 220 236 252
D Н Э н ╜ ═ ▌ э ¤
141 157 173 189 205 221 237 253
E О Ю о ╛ ╬ ▐ ю ■
142 158 174 190 206 222 238 254
F П Я п ┐ ╧ ▀ я SP
143 159 175 191 207 223 239 255
125

Page 18 (PC852: Latin2)
HEX 8 9 A B C D E F
0 Ç É á ░ └ đ Ó -
128 144 160 176 192 208 224 240
1 ü Ĺ í ▒ ┴ Ð β ˝
129 145 161 177 193 209 225 241
2 é ĺ ó ▓ ┬ Ď Ô ˛
130 146 162 178 194 210 226 242
3 â ô ú │ ├ Ë Ń ˇ
131 147 163 179 195 211 227 243
4 ä ö Ą ┤ ─ ď ń ˘
132 148 164 180 196 212 228 244
5 ů Ľ ą Á ┼ Ň ň §
133 149 165 181 197 213 229 245
6 ć ľ Ž Â Ă Í Š ÷
134 150 166 182 198 214 230 246
7 ç Ś ž Ě ă Î š ¸
135 151 167 183 199 215 231 247
8 ł ś Ę Ş ╚ ě Ŕ °
136 152 168 184 200 216 232 248
9 ë Ö ę ╣ ╔ ┘ Ú ¨
137 153 169 185 201 217 233 249
A Ő Ü SP ║ ╩ ┌ ŕ •
138 154 170 186 202 218 234 250
B ő Ť ź ╗ ╦ █ Ű ű
139 155 171 187 203 219 235 251
C î ť Č ╝ ╠ ▄ ý Ř
140 156 172 188 204 220 236 252
D Ź Ł ş Ż ═ Ţ Ý ř
141 157 173 189 205 221 237 253
E Ä × « ż ╬ Ů ţ ■
142 158 174 190 206 222 238 254
F Ć č » ┐ ¤ ▀ ´ SP
143 159 175 191 207 223 239 255
126

Appendix
Page 19 (PC858: Euro)
HEX 8 9 A B C D E F
0 Ç É á ░ └ ð Ó -
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ Ð β ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ Ê Ô
130 146 162 178 194 210 226 242
3 â ô ú │ ├ Ë Ò ¾
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ È õ ¶
132 148 164 180 196 212 228 244
5 à ò Ñ Á ┼ € Õ §
133 149 165 181 197 213 229 245
6 å û a
Â ã Í μ ÷
134 150 166 182 198 214 230 246
7 ç ù o
À Ã Î þ ¸
135 151 167 183 199 215 231 247
8 ê ÿ ¿ © ╚ Ï Þ °
136 152 168 184 200 216 232 248
9 ë Ö ® ╣ ╔ ┘ Ú ¨
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Û ·
138 154 170 186 202 218 234 250
B ï ø ½ ╗ ╦ █ Ù ¹
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ý ³
140 156 172 188 204 220 236 252
D ì Ø ¡ ¢ ═ ¦ Ý ²
141 157 173 189 205 221 237 253
E Ä × « ¥ ╬ Ì ¯ ■
142 158 174 190 206 222 238 254
F Å ƒ » ┐ ¤ ▀ ´ SP
143 159 175 191 207 223 239 255
127

Page 20 (KU42: Thai)
HEX 8 9 A B C D E F
0 ┌ ๐ SP ฒ ย เ  ิ๊
128 144 160 176 192 208 224 240
1 ┐ ๑ ก ณ ร แ  ิ๋
129 145 161 177 193 209 225 241
2 └ ๒ ข ด ฤ โ  ิ์
130 146 162 178 194 210 226 242
3 ┘ ๓ ค ต ล ใ  ี่
131 147 163 179 195 211 227 243
4 │ ๔ ฆ ถ ว ไ  ี้
132 148 164 180 196 212
ฺ 228 244
5 ─ ๕ ง ท ศ ๆ ี๊
133 149 165 181 197 213 229 245
6 ├ ๖ จ ธ ษ ฯ ํ่ ี๋
134 150 166 182 198
ุ 214 230 246
7 ┤ ๗ ฉ น ส ํ้ ึ่
135 151 167 183 199
ู 215 231 247
8 ┴ ๘ ช บ ห ํ๊ ึ้
136 152 168 184 200 216 232 248
9 ┬ ๙ ซ ป ฬ ิ ํ๋ ึ๊
137 153 169 185 201 217 233 249
A ┼ ฃ ฌ ผ อ ี ั่ ึ๋
138 154 170 186 202 218 234 250
B █ ฅ ญ ฝ ฮ ึ ั้ ื่
139 155 171 187 203 219 235 251
C ← โ ฎ พ ะ ื ั๊ ื้
140 156 172 188 204 220 236 252
D ↑ ใ ฏ ฟ ฦ ั ั๋ ื๊
141 157 173 189 205 221 237 253
E → ไ ฐ ภ า ํ ิ่ ื๋
142 158 174 190 206 222 238 254
F ↓ เ ฑ ม ۫า  ิ้ SP
143 159 175 191 207 223 239 255
128

Appendix
Page 21 (TIS11: Thai)
HEX 8 9 A B C D E F
0
ั่ ึ๋ เ ฐ ภ ะ เ ๐
128 144 160 176 192 208 224 240
1
ั้ ื่ ก ฑ ม ั แ ๑
129 145 161 177 193 209 225 241
2
ั๊ ื้ ข ฒ ย า โ ๒
130 146 162 178 194 210 226 242
3
ั๋ ื๊ ฃ ณ ร ۫า ใ ๓
131 147 163 179 195 211 227 243
4
ิ่ ื๋ ค ด ฤ ิ ไ ๔
132 148 164 180 196 212 228 244
5
ิ้ ํ่ ฅ ต ล ี ๅ ๕
133 149 165 181 197 213 229 245
6
ิ๊ ํ้ ฆ ถ ฦ ึ ๆ ๖
134 150 166 182 198 214 230 246
7
ิ๋ ํ๊ ง ท ว ื  ๗
135 151 167 183 199 215 231 247
ุ
8
ิ์ ํ๋ จ ธ ศ  ๘
136 152 168 184 200 216 232 248
ู
9
ี่ ┌ ฉ น ษ  ๙
137 153 169 185 201 217 233 249
ฺ
A
ี้ ┐ ช บ ส  ๚
138 154 170 186 202 218 234 250
B
ี๊ └ ซ ป ห ─  ๛
139 155 171 187 203 219 235 251
C
ี๋ ┘ ฌ ผ ฬ ┴  โ
140 156 172 188 204 220 236 252
D
ึ่ │ ญ ฝ อ ┬ ํ ใ
141 157 173 189 205 221 237 253
E
ึ้ ├ ฎ พ ฮ ┼ ๎ ไ
142 158 174 190 206 222 238 254
F ┤ ฏ ฟ ฯ ฿ ๏ SP
ึ๊
143 159 175 191 207 223 239 255
129

Page 26 (TIS18: Thai)
HEX 8 9 A B C D E F
0 ┌ โ SP ฐ ภ ะ เ ๐
128 144 160 176 192 208 224 240
1 ┐ ใ ก ฑ ม ั แ ๑
129 145 161 177 193 209 225 241
2 └ ั่ ข ฒ ย า โ ๒
130 146 162 178 194 210 226 242
3 ┘ ั้ ฃ ณ ร ۫า ใ ๓
131 147 163 179 195 211 227 243
4 │ ั๊ ค ด ฤ ิ ไ ๔
132 148 164 180 196 212 228 244
5 ─ ั๋ ฅ ต ล ี ๅ ๕
133 149 165 181 197 213 229 245
6 ├ ิ่ ฆ ถ ฦ ึ ๆ ๖
134 150 166 182 198 214 230 246
7 ┤ ิ้ ง ท ว ื  ๗
135 151 167 183 199 215 231 247
ุ
8 ┴ ิ๊ จ ธ ศ  ๘
136 152 168 184 200 216 232 248
ู
9 ┬ ิ๋ ฉ น ษ  ๙
137 153 169 185 201 217 233 249
ฺ
A ┼ ิ์ ช บ ส  ๛
138 154 170 186 202 218 234 250
B █ ี่ ซ ป ห ึ่  ื่
139 155 171 187 203 219 235 251
C ← ี้ ฌ ผ ฬ ึ้  ื้
140 156 172 188 204 220 236 252
D ↑ ี๊ ญ ฝ อ ึ๊ ํ ื๊
141 157 173 189 205 221 237 253
E → ี๋ ฎ พ ฮ ึ๋ ไ ื๋
142 158 174 190 206 222 238 254
F ↓ เ ฏ ฟ ฯ ฿ ๏ SP
143 159 175 191 207 223 239 255
130

Appendix
Page 30 (TCVN-3: Vientamese)
HEX 8 9 A B C D E F
0 SP SP SP SP SP é SP SP
128 144 160 176 192 208 224 240
1 SP SP SP SP SP ẹ ỏ ủ
129 145 161 177 193 209 225 241
2 SP SP SP SP SP ề õ ũ
130 146 162 178 194 210 226 242
3 SP SP SP SP SP ể ó ú
131 147 163 179 195 211 227 243
4 SP SP SP SP SP ễ ọ ụ
132 148 164 180 196 212 228 244
5 SP SP SP à SP ế ồ ừ
133 149 165 181 197 213 229 245
6 SP SP SP ả ặ ệ ổ ử
134 150 166 182 198 214 230 246
7 SP SP SP ã ầ ì ỗ ữ
135 151 167 183 199 215 231 247
8 SP SP ă á ẩ ỉ ố ứ
136 152 168 184 200 216 232 248
9 SP SP â ạ ẫ SP ộ ự
137 153 169 185 201 217 233 249
A SP SP ê SP ấ SP ờ ỳ
138 154 170 186 202 218 234 250
B SP SP ô ằ ậ SP ở ỷ
139 155 171 187 203 219 235 251
C SP SP ơ ẳ è ĩ ỡ ỹ
140 156 172 188 204 220 236 252
D SP SP ư ẵ SP í ớ ý
141 157 173 189 205 221 237 253
E SP SP đ ắ ẻ ị ợ ỵ
142 158 174 190 206 222 238 254
F SP SP SP SP ẽ ò ù SP
143 159 175 191 207 223 239 255
131

Page 31 (TCVN-3: Vientamese)
HEX 8 9 A B C D E F
0 SP SP SP SP SP É SP SP
128 144 160 176 192 208 224 240
1 SP SP Ă SP SP Ẹ Ỏ Ủ
129 145 161 177 193 209 225 241
2 SP SP Â SP SP Ề Õ Ũ
130 146 162 178 194 210 226 242
3 SP SP SP SP SP Ể Ó Ú
131 147 163 179 195 211 227 243
4 SP SP SP SP SP Ễ Ọ Ụ
132 148 164 180 196 212 228 244
5 SP SP SP À SP Ế Ồ Ừ
133 149 165 181 197 213 229 245
6 SP SP SP Ả Ặ Ệ Ổ Ử
134 150 166 182 198 214 230 246
7 SP SP Ð Ã Ầ Ì Ỗ Ữ
135 151 167 183 199 215 231 247
8 SP SP SP Á Ẩ Ỉ Ố Ứ
136 152 168 184 200 216 232 248
9 SP SP SP Ạ Ẫ SP Ộ Ự
137 153 169 185 201 217 233 249
A SP SP Ê SP Ấ SP Ờ Ỳ
138 154 170 186 202 218 234 250
B SP SP Ô Ằ Ậ SP Ở Ỷ
139 155 171 187 203 219 235 251
C SP SP Ơ Ẳ È Ĩ Ỡ Ỹ
140 156 172 188 204 220 236 252
D SP SP Ư Ẵ SP Í Ớ Ý
141 157 173 189 205 221 237 253
E SP SP SP Ắ Ẻ Ị Ợ Ỵ
142 158 174 190 206 222 238 254
F SP SP SP SP Ẽ Ò Ù SP
143 159 175 191 207 223 239 255
132

Appendix
Page 32 (PC720: Arabic)
HEX 8 9 A B C D E F
0 SP SP ‫ﺏ‬ ░ └ ╨ ‫ﺽ‬ ≡
128 144 160 176 192 208 224 240
1 SP ّ ‫ﺓ‬ ▒ ┴ ╤ ‫ﻁ‬ ً
129 145 161 177 193 209 225 241
2 é ْ ‫ﺕ‬ ▓ ┬ ╥ ‫ﻅ‬ ٌ
130 146 162 178 194 210 226 242
3 â ô ‫ﺙ‬ │ ├ ╙ ‫ﻉ‬ ٍ
131 147 163 179 195 211 227 243
4 SP ¤ ‫ﺝ‬ ┤ ─ ╘ ‫ﻍ‬ َ
132 148 164 180 196 212 228 244
5 à ‫ـ‬ ‫ﺡ‬ ╡ ┼ ╒ ‫ﻑ‬ ُ
133 149 165 181 197 213 229 245
6 SP û ‫ﺥ‬ ╢ ╞ ╓ μ ِ
134 150 166 182 198 214 230 246
7 ç ù ‫ﺩ‬ ╖ ╟ ╫ ‫ﻕ‬ ≈
135 151 167 183 199 215 231 247
8 ê ‫ء‬ ‫ﺫ‬ ╕ ╚ ╪ ‫ﻙ‬ °
136 152 168 184 200 216 232 248
9 ë ‫ﺁ‬ ‫ﺭ‬ ╣ ╔ ┘ ‫ﻝ‬ ·
137 153 169 185 201 217 233 249
A è ‫ﺃ‬ ‫ﺯ‬ ║ ╩ ┌ ‫ﻡ‬ ·
138 154 170 186 202 218 234 250
B ï ‫ﺅ‬ ‫ﺱ‬ ╗ ╦ █ ‫ﻥ‬ √
139 155 171 187 203 219 235 251
C î £ ‫ﺵ‬ ╝ ╠ ▄ ‫ﻫ‬ ⁿ
140 156 172 188 204 220 236 252
D SP ‫ﺇ‬ ‫ﺹ‬ ╜ ═ ▌ ‫ﻭ‬ ²
141 157 173 189 205 221 237 253
E SP ‫ﺉ‬ « ╛ ╬ ▐ ‫ﻯ‬ ■
142 158 174 190 206 222 238 254
F SP ‫ﺍ‬ » ┐ ╧ ▀ ‫ﻱ‬ SP
143 159 175 191 207 223 239 255
133

Page 33 (WPC775: Baltic Rim)
HEX 8 9 A B C D E F
0 Ć É Ā ░ └ ą Ó -
128 144 160 176 192 208 224 240
1 ü æ Ī ▒ ┴ č ß ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ ę Ō “
130 146 162 178 194 210 226 242
3 ā ō Ż │ ├ ė Ń ¾
131 147 163 179 195 211 227 243
4 ä ö ż ┤ ─ į õ ¶
132 148 164 180 196 212 228 244
5 ģ Ģ ź Ą ┼ š Õ §
133 149 165 181 197 213 229 245
6 å ¢ ” Č Ų ų μ ÷
134 150 166 182 198 214 230 246
7 ć Ś ¦ Ę Ū ū ń „
135 151 167 183 199 215 231 247
8 ł ś © Ė ╚ ž Ķ °
136 152 168 184 200 216 232 248
9 ē Ö ® ╣ ╔ ┘ ķ ·
137 153 169 185 201 217 233 249
A Ŗ Ü ¬ ║ ╩ ┌ Ļ ·
138 154 170 186 202 218 234 250
B ŗ ø ½ ╗ ╦ █ ļ ¹
139 155 171 187 203 219 235 251
C ī £ ¼ ╝ ╠ ▄ ņ ³
140 156 172 188 204 220 236 252
D Ź Ø Ł Į ═ ▌ Ē ²
141 157 173 189 205 221 237 253
E Ä × « Š ╬ ▐ Ņ ■
142 158 174 190 206 222 238 254
F Å ¤ » ┐ Ž ▀ ’ SP
143 159 175 191 207 223 239 255
134

Appendix
Page 34 (PC855: Cylillic)
HEX 8 9 A B C D E F
0 ђ љ а ░ └ л Я -
128 144 160 176 192 208 224 240
1 Ђ Љ А ▒ ┴ Л р ы
129 145 161 177 193 209 225 241
2 ѓ њ б ▓ ┬ м Р Ы
130 146 162 178 194 210 226 242
3 Ѓ Њ Б │ ├ М с з
131 147 163 179 195 211 227 243
4 ё ћ ц ┤ ─ н С З
132 148 164 180 196 212 228 244
5 Ё Ћ Ц х ┼ Н т ш
133 149 165 181 197 213 229 245
6 є ќ д Х к о Т Ш
134 150 166 182 198 214 230 246
7 Є Ќ Д и К О у э
135 151 167 183 199 215 231 247
8 ѕ ў е И ╚ п У Э
136 152 168 184 200 216 232 248
9 Ѕ Ў Е ╣ ╔ ┘ ж щ
137 153 169 185 201 217 233 249
A і џ ф ║ ╩ ┌ Ж Щ
138 154 170 186 202 218 234 250
B І Џ Ф ╗ ╦ █ в ч
139 155 171 187 203 219 235 251
C ї ю г ╝ ╠ ▄ В Ч
140 156 172 188 204 220 236 252
D Ї Ю Г й ═ П ь §
141 157 173 189 205 221 237 253
E ј ъ « Й ╬ я Ь ■
142 158 174 190 206 222 238 254
F Ј Ъ » ┐ ¤ ▀ № SP
143 159 175 191 207 223 239 255
135

Page 35 (PC861: Icelandic)
HEX 8 9 A B C D E F
0 Ç É á ░ └ ╨ α ≡
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ ╤ ß ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ ╥ Γ ≥
130 146 162 178 194 210 226 242
3 â ô ú │ ├ ╙ π ≤
131 147 163 179 195 211 227 243
4 ä ö Á ┤ ─ ╘ Σ ⌠
132 148 164 180 196 212 228 244
5 à þ Í ╡ ┼ ╒ σ ⌡
133 149 165 181 197 213 229 245
6 å û Ó ╢ ╞ ╓ μ ÷
134 150 166 182 198 214 230 246
7 ç Ý Ú ╖ ╟ ╫ τ ≈
135 151 167 183 199 215 231 247
8 ê ý ¿ ╕ ╚ ╪ Φ °
136 152 168 184 200 216 232 248
9 ë Ö ⌐ ╣ ╔ ┘ Θ ·
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Ω ·
138 154 170 186 202 218 234 250
B Ð ø ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
C ð £ ¼ ╝ ╠ ▄ ∞ ⁿ
140 156 172 188 204 220 236 252
D Þ Ø ¡ ╜ ═ ▌ φ ²
141 157 173 189 205 221 237 253
E Ä Pt « ╛ ╬ ▐ ε ‫ع‬
142 158 174 190 206 222 238 254
F Å ƒ » ┐ ╧ ▀ ∩ SP
143 159 175 191 207 223 239 255
136

Appendix
Page 36 (PC862: Hebrew)
HEX 8 9 A B C D E F
0 ‫א‬ ‫נ‬ á ░ └ ╨ α ≡
128 144 160 176 192 208 224 240
1 ‫ב‬ ‫ס‬ í ▒ ┴ ╤ ß ±
129 145 161 177 193 209 225 241
2 ‫ג‬ ‫ע‬ ó ▓ ┬ ╥ Γ ≥
130 146 162 178 194 210 226 242
3 ‫ד‬ ‫ף‬ ú │ ├ ╙ π ≤
131 147 163 179 195 211 227 243
4 ‫ה‬ ‫פ‬ ñ ┤ ─ ╘ Σ ⌠
132 148 164 180 196 212 228 244
5 ‫ו‬ ‫ץ‬ Ñ ╡ ┼ ╒ σ ⌡
133 149 165 181 197 213 229 245
6 ‫ז‬ ‫צ‬ ª ╢ ╞ ╓ μ ÷
134 150 166 182 198 214 230 246
7 ‫ח‬ ‫ק‬ º ╖ ╟ ╫ τ ≈
135 151 167 183 199 215 231 247
8 ‫ט‬ ‫ר‬ ¿ ╕ ╚ ╪ Φ °
136 152 168 184 200 216 232 248
9 ‫י‬ ‫ש‬ ⌐ ╣ ╔ ┘ Θ ·
137 153 169 185 201 217 233 249
A ‫ך‬ ‫ת‬ ¬ ║ ╩ ┌ Ω ·
138 154 170 186 202 218 234 250
B ‫כ‬ ¢ ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
C ‫ל‬ £ ¼ ╝ ╠ ▄ ∞ ⁿ
140 156 172 188 204 220 236 252
D ‫ם‬ ¥ ¡ ╜ ═ ▌ φ ²
141 157 173 189 205 221 237 253
E ‫מ‬ Pt « ╛ ╬ ▐ ε ‫ع‬
142 158 174 190 206 222 238 254
F ‫ן‬ ƒ » ┐ ╧ ▀ ∩ SP
143 159 175 191 207 223 239 255
137

Page 37 (PC864: Arabic)
HEX 8 9 A B C D E F
0 ° β SP ٠ ¢ ‫ﺫ‬ ‫ـ‬ ?
128 144 160 176 192 208 224 240
1 · ∞ ١ ‫ﺀ‬ ‫ﺭ‬ ‫ﻓ‬ ?
129 145 161 177 193 209 225 241
2 · φ ‫ﺂ‬ ٢ ‫ﺁ‬ ‫ﺯ‬ ‫ﻗ‬ ‫ﻥ‬
130 146 162 178 194 210 226 242
3 √ ± £ ٣ ‫ﺃ‬ ‫ﺳ‬ ‫ﻛ‬ ‫ﻩ‬
131 147 163 179 195 211 227 243
4 ▒ ½ ¤ ٤ ‫ﺅ‬ ‫ﺷ‬ ‫ﻟ‬ ‫ﻬ‬
132 148 164 180 196 212 228 244
5 ─ ¼ ‫ﺄ‬ ٥ ‫ﻊ‬ ‫ﺻ‬ ‫ﻣ‬ ‫ﻰ‬
133 149 165 181 197 213 229 245
6 │ ≈ SP ٦ ‫ﺋ‬ ‫ﺿ‬ ‫ﻧ‬ ‫ﻲ‬
134 150 166 182 198 214 230 246
7 ┼ « € ٧ ‫ﺍ‬ ‫ﻃ‬ ‫ﻫ‬ ‫ﻐ‬
135 151 167 183 199 215 231 247
8 ┤ » ‫ﺎ‬ ٨ ‫ﺑ‬ ‫ﻇ‬ ‫ﻭ‬ ‫ﻕ‬
136 152 168 184 200 216 232 248
9 ┬ ‫ﻷ‬ ‫ﺏ‬ ٩ ‫ﺓ‬ ‫ﻋ‬ ‫ﻯ‬ ‫ﻵ‬
137 153 169 185 201 217 233 249
A ├ ‫ﻸ‬ ‫ﺕ‬ ‫ﻑ‬ ‫ﺗ‬ ‫ﻏ‬ ‫ﻳ‬ ‫ﻶ‬
138 154 170 186 202 218 234 250
B ┴ SP ‫ﺙ‬ ‫؛‬ ‫ﺛ‬ ¦ ‫ﺽ‬ ‫ﻝ‬
139 155 171 187 203 219 235 251
C ┐ SP ، ‫ﺱ‬ ‫ﺟ‬ ¬ ‫ﻌ‬ ‫ﻙ‬
140 156 172 188 204 220 236 252
D ┌ ‫ﻻ‬ ‫ﺝ‬ ‫ﺵ‬ ‫ﺣ‬ ÷ ‫ﻎ‬ ‫ﻱ‬
141 157 173 189 205 221 237 253
E └ ‫ﻼ‬ ‫ﺡ‬ ‫ﺹ‬ ‫ﺧ‬ × ‫ﻍ‬ ■
142 158 174 190 206 222 238 254
F ┘ ‫ﺀ‬ ‫ﺥ‬ ‫؟‬ ‫ﺩ‬ ‫ﻉ‬ ‫ﻡ‬ SP
143 159 175 191 207 223 239 255
138

Appendix
HEX 8 9 A B C D E F
0 SP Ί ϊ ░ └ Τ ζ
128 144 160 176 192 208 224 240
1 SP Ϊ ΐ ▒ ┴ Υ η ±
129 145 161 177 193 209 225 241
2 SP Ό ό ▓ ┬ Φ θ υ
130 146 162 178 194 210 226 242
3 SP SP ύ │ ├ Χ ι ϕ
131 147 163 179 195 211 227 243
4 SP SP Α ┤ ─ Ψ κ χ
132 148 164 180 196 212 228 244
5 SP Ύ Β Κ ┼ Ω λ §
133 149 165 181 197 213 229 245
6 Ά Ϋ Γ Λ Π α μ ψ
134 150 166 182 198 214 230 246
7 € © Δ Μ Ρ β ν ΅
135 151 167 183 199 215 231 247
8 · Ώ Ε Ν ╚ γ ξ °
136 152 168 184 200 216 232 248
9 ¬ ² Ζ ╣ ╔ ┘ ο ¨
137 153 169 185 201 217 233 249
A ¦ ³ Η ║ ╩ ┌ π ω
138 154 170 186 202 218 234 250
B ‘ ά ½ ╗ ╦ █ ρ ϋ
139 155 171 187 203 219 235 251
C ’ £ Θ ╝ ╠ ▄ σ ΰ
140 156 172 188 204 220 236 252
D Έ έ Ι Ξ ═ δ ς ώ
141 157 173 189 205 221 237 253
E ― ή « Ο ╬ ε τ ■
142 158 174 190 206 222 238 254
F Ή ί » ┐ Σ ▀ ´ SP
143 159 175 191 207 223 239 255
139

Page 39 (ISO8859-2: Latin2)
HEX 8 9 A B C D E F
0 ░ └ SP ° Ŕ Ð ŕ đ
128 144 160 176 192 208 224 240
1 ▒ ┴ Ą ą Á Ń á ń
129 145 161 177 193 209 225 241
2 ▓ ┬ ˘ ˛ Â Ň â ň
130 146 162 178 194 210 226 242
3 │ ├ Ł ł Ă Ó ă ó
131 147 163 179 195 211 227 243
4 ┤ ─ ¤ ´ Ä Ô ä ô
132 148 164 180 196 212 228 244
5 ┘ ┼   Ĺ Ő ĺ ő
133 149 165 181 197 213 229 245
6 ┌ ▄ Ś ś Ć Ö ć ö
134 150 166 182 198 214 230 246
7 █ ▀ § ˇ Ç × ç ÷
135 151 167 183 199 215 231 247
8 © ╚ ¨ ¸ Č Ř č ř
136 152 168 184 200 216 232 248
9 ╣ ╔ Š š É Ů é ů
137 153 169 185 201 217 233 249
A ║ ╩ Ş ş Ę Ú ę ú
138 154 170 186 202 218 234 250
B ╗ ╦ Ť  Ë Ű ë ű
139 155 171 187 203 219 235 251
C ╝ ╠ Ź ź Ě Ü ě ü
140 156 172 188 204 220 236 252
D ¢ ═ ˝ Í Ý í ý
141 157 173 189 205 221 237 253
E ¥ ╬ Ž ž Î Ţ î ţ
142 158 174 190 206 222 238 254
F ┐ ® Ż ż Ď ß  ˙
143 159 175 191 207 223 239 255
140

Appendix
Page 40 (ISO8859-15: Latin9)
HEX 8 9 A B C D E F
0 SP SP SP ° À Ð à ð
128 144 160 176 192 208 224 240
1 SP SP ¡ ± Á Ñ á ñ
129 145 161 177 193 209 225 241
2 SP SP ¢ ² Â Ò â ò
130 146 162 178 194 210 226 242
3 SP SP £ ³ Ã Ó ã ó
131 147 163 179 195 211 227 243
4 SP SP € Ž Ä Ô ä ô
132 148 164 180 196 212 228 244
5 SP SP ¥ μ Å Õ å õ
133 149 165 181 197 213 229 245
6 SP SP Š ¶ Æ Ö æ ö
134 150 166 182 198 214 230 246
7 SP SP § · Ç × ç ÷
135 151 167 183 199 215 231 247
8 SP SP š ž È Ø è ø
136 152 168 184 200 216 232 248
9 SP SP © ¹ É Ù é ù
137 153 169 185 201 217 233 249
A SP SP ª º Ê Ú ê ú
138 154 170 186 202 218 234 250
B SP SP « » Ë Û ë û
139 155 171 187 203 219 235 251
C SP SP ¬ Œ Ì Ü ì ü
140 156 172 188 204 220 236 252
D SP SP œ Í Ý í ý
141 157 173 189 205 221 237 253
E SP SP ® Ÿ Î Þ î þ
142 158 174 190 206 222 238 254
F SP SP ¯ ¿ Ï ß ï ÿ
143 159 175 191 207 223 239 255
141

Page 41 (PC1098: Farci)
HEX 8 9 A B C D E F
0 SP ‫ﺅ‬ ‫ﺣ‬ ░ └ ‫ﻊ‬ ‫ک‬
128 144 160 176 192 208 224 240
1 SP ‫ﺋ‬ ‫ﺥ‬ ▒ ┴ ‫ﻋ‬ ‫ﻛ‬ ‫ﯽ‬
129 145 161 177 193 209 225 241
2 ، ‫ﺏ‬ ‫ﺧ‬ ▓ ┬ ‫ﻌ‬ ‫گ‬ ‫ﻳ‬
130 146 162 178 194 210 226 242
3 ‫؛‬ ‫ﺑ‬ ‫ﺩ‬ │ ├ ‫ﻍ‬ ‫ﮔ‬ ‫ـ‬
131 147 163 179 195 211 227 243
4 ‫؟‬ ‫پ‬ ‫ﺫ‬ ┤ ─ ‫ﻎ‬ ‫ﻝ‬ ٠
132 148 164 180 196 212 228 244
5 ً ‫ﭘ‬ ‫ﺭ‬ ‫ﺽ‬ ┼ ‫ﻏ‬ ‫ﻟ‬ ١
133 149 165 181 197 213 229 245
6 ‫ﺁ‬ ‫ﺕ‬ ‫ﺯ‬ ‫ﺿ‬ ‫ﻅ‬ ‫ﻐ‬ ‫ﻡ‬ ٢
134 150 166 182 198 214 230 246
7 ‫ﺂ‬ ‫ﺗ‬ ‫ژ‬ ‫ﻁ‬ ‫ﻉ‬ ‫ﻑ‬ ‫ﻣ‬ ٣
135 151 167 183 199 215 231 247
8 ‫ﺙ‬ ‫ﺱ‬ ‫ﻁ‬ ╚ ‫ﻓ‬ ‫ﻥ‬ ۴
136 152 168 184 200 216 232 248
9 ‫ﺍ‬ ‫ﺛ‬ ‫ﺳ‬ ╣ ╔ ┘ ‫ﻧ‬ ۵
137 153 169 185 201 217 233 249
A ‫ﺎ‬ ‫ﺝ‬ ‫ﺵ‬ ║ ╩ ┌ ‫ﻭ‬ ۶
138 154 170 186 202 218 234 250
B ‫ﺟ‬ ‫ﺷ‬ ╗ ╦ █ ‫ﻩ‬ ٧
139 155 171 187 203 219 235 251
C ‫ﺀ‬ ‫چ‬ ‫ﺹ‬ ╝ ╠ ▄ ‫ﻫ‬ ٨
140 156 172 188 204 220 236 252
D ‫ﺃ‬ ‫ﭼ‬ ‫ﺻ‬ ═ ‫ﻕ‬ ‫ﻬ‬ ٩
141 157 173 189 205 221 237 253
E ‫ﺄ‬ × « ‫ﻅ‬ ╬ ‫ﻗ‬ ‫ۀ‬ ■
142 158 174 190 206 222 238 254
F ‫ﺡ‬ » ┐ SP ▀ ‫ی‬ SP
143 159 175 191 207 223 239 255
142

Appendix
Page 42 (PC1118: Lithuanian)
HEX 8 9 A B C D E F
0 Ç É á ░ └ ą α ≡
128 144 160 176 192 208 224 240
1 ü æ í ▒ ┴ č β ±
129 145 161 177 193 209 225 241
2 é Æ ó ▓ ┬ ę Γ ≥
130 146 162 178 194 210 226 242
3 â ô ú │ ├ ė π ≤
131 147 163 179 195 211 227 243
4 ä ö ñ ┤ ─ į Σ „
132 148 164 180 196 212 228 244
5 à ò Ñ Ą ┼ š σ “
133 149 165 181 197 213 229 245
a
6 å û Č Ų ų μ ÷
134 150 166 182 198 214 230 246
o
7 ç ù Ę Ū ū τ ≈
135 151 167 183 199 215 231 247
8 ê ÿ ¿ Ė ╚ ž Φ °
136 152 168 184 200 216 232 248
9 ë Ö ⌐ ╣ ╔ ┘ Θ ·
137 153 169 185 201 217 233 249
A è Ü ¬ ║ ╩ ┌ Ω ˙
138 154 170 186 202 218 234 250
B ï ¢ ½ ╗ ╦ █ δ √
139 155 171 187 203 219 235 251
C î £ ¼ ╝ ╠ ▄ ∞ ⁿ
140 156 172 188 204 220 236 252
D ì ¥ ¡ Į ═ ▌ ϕ ²
141 157 173 189 205 221 237 253
E Ä Pt « Š ╬ ▐ ε ■
142 158 174 190 206 222 238 254
F Å ƒ » ┐ Ž ▀ ӣ SP
143 159 175 191 207 223 239 255
143

Page 43 (PC1119: Lithuanian)
HEX 8 9 A B C D E F
0 А Р а ░ └ ą р Ё
128 144 160 176 192 208 224 240
1 Б С б ▒ ┴ č с ё
129 145 161 177 193 209 225 241
2 В Т в ▓ ┬ ę т ≥
130 146 162 178 194 210 226 242
3 Г У г │ ├ ė у ≤
131 147 163 179 195 211 227 243
4 Д Ф д ┤ ─ į ф „
132 148 164 180 196 212 228 244
5 Е Х е Ą ┼ š х “
133 149 165 181 197 213 229 245
6 Ж Ц ж Č Ų ų ц ÷
134 150 166 182 198 214 230 246
7 З Ч з Ę Ū ū ч ≈
135 151 167 183 199 215 231 247
8 И Ш и Ė ╚ ž ш °
136 152 168 184 200 216 232 248
9 Й Щ й ╣ ╔ ┘ щ ·
137 153 169 185 201 217 233 249
A К Ъ к ║ ╩ ┌ ъ ·
138 154 170 186 202 218 234 250
B Л Ы л ╗ ╦ █ ы √
139 155 171 187 203 219 235 251
C M Ь м ╝ ╠ ▄ ь ⁿ
140 156 172 188 204 220 236 252
D Н Э н Į ═ ▌ э ²
141 157 173 189 205 221 237 253
E О Ю о Š ╬ ▐ ю ■
142 158 174 190 206 222 238 254
F П Я п ┐ Ž ▀ я SP
143 159 175 191 207 223 239 255
144

Appendix
Page 44 (PC1125: Ukranian)
HEX 8 9 A B C D E F
0 А Р а ░ └ ╨ р Ё
128 144 160 176 192 208 224 240
1 Б С б ▒ ┴ ╤ с ё
129 145 161 177 193 209 225 241
2 В Т в ▓ ┬ ╥ т Ґ
130 146 162 178 194 210 226 242
3 Г У г │ ├ ╙ у ґ
131 147 163 179 195 211 227 243
4 Д Ф д ┤ ─ ╘ ф Є
132 148 164 180 196 212 228 244
5 Е Х е ╡ ┼ ╒ х є
133 149 165 181 197 213 229 245
6 Ж Ц ж ╢ ╞ ╓ ц І
134 150 166 182 198 214 230 246
7 З Ч з ╖ ╟ ╫ ч і
135 151 167 183 199 215 231 247
8 И Ш и ╕ ╚ ╪ ш Ї
136 152 168 184 200 216 232 248
9 Й Щ й ╣ ╔ ┘ щ ї
137 153 169 185 201 217 233 249
A К Ъ к ║ ╩ ┌ ъ ÷
138 154 170 186 202 218 234 250
B Л Ы л ╗ ╦ █ ы ±
139 155 171 187 203 219 235 251
C М Ь м ╝ ╠ ▄ ь №
140 156 172 188 204 220 236 252
D Н Э н ╜ ═ ▌ э ¤
141 157 173 189 205 221 237 253
E О Ю о ╛ ╬ ▐ ю ■
142 158 174 190 206 222 238 254
F П Я п ┐ ╧ ▀ я SP
143 159 175 191 207 223 239 255
145

Page 45 (WPC1250: Latin 2)
HEX 8 9 A B C D E F
0 € SP SP ° Ŕ Đ ŕ đ
128 144 160 176 192 208 224 240
1 SP ‘ ˇ ± Á Ń á ń
129 145 161 177 193 209 225 241
2 ‚ ’ ˘ ˛ Â Ň â ň
130 146 162 178 194 210 226 242
3 SP “ Ł ł Ă Ó ă ó
131 147 163 179 195 211 227 243
4 „ ” ¤ ´ Ä Ô ä ô
132 148 164 180 196 212 228 244
5 … • Ą μ Ĺ Ő ĺ ő
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Ć Ö ć ö
134 150 166 182 198 214 230 246
7 ‡ — § · Ç × ç ÷
135 151 167 183 199 215 231 247
8 SP SP ¨ ¸ Č Ř č ř
136 152 168 184 200 216 232 248
9 ‰ ™ © ą É Ů é ů
137 153 169 185 201 217 233 249
A Š š Ş ş Ę Ú ę ú
138 154 170 186 202 218 234 250
B ‹ › « » Ë Ű ë ű
139 155 171 187 203 219 235 251
C Ś ś ¬  Ě Ü ě ü
140 156 172 188 204 220 236 252
D Ť  ˝ Í Ý í ý
141 157 173 189 205 221 237 253
E Ž ž ®  Î Ţ î ţ
142 158 174 190 206 222 238 254
F Ź ź Ż ż Ď ß  ˙
143 159 175 191 207 223 239 255
146

Appendix
Page 46 (WPC1251: Cyrillic)
HEX 8 9 A B C D E F
0 Ђ ђ SP ° А Р а р
128 144 160 176 192 208 224 240
1 Ѓ ‘ Ў ± Б С б с
129 145 161 177 193 209 225 241
2 ‚ ’ ў І В Т в т
130 146 162 178 194 210 226 242
3 ѓ “ Ј і Г У г у
131 147 163 179 195 211 227 243
4 „ ” ¤ ґ Д Ф д ф
132 148 164 180 196 212 228 244
5 … • Ґ μ Е Х е х
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Ж Ц ж ц
134 150 166 182 198 214 230 246
7 ‡ — § · З Ч з ч
135 151 167 183 199 215 231 247
8 € SP Ё ё И Ш и ш
136 152 168 184 200 216 232 248
9 ‰ ™ © № Й Щ й щ
137 153 169 185 201 217 233 249
A Љ љ Є є К Ъ к ъ
138 154 170 186 202 218 234 250
B ‹ › « » Л Ы л ы
139 155 171 187 203 219 235 251
C Њ њ ¬ ј М Ь м ь
140 156 172 188 204 220 236 252
D Ќ ќ Ѕ Н Э н э
141 157 173 189 205 221 237 253
E Ћ ћ ® ѕ О Ю о ю
142 158 174 190 206 222 238 254
F Џ џ Ї ї П Я п я
143 159 175 191 207 223 239 255
147

Page 47 (WPC1253: Greek)
HEX 8 9 A B C D E F
0 € SP SP ° ΐ Π ΰ π
128 144 160 176 192 208 224 240
1 SP ‘ ΅ ± Α Ρ α ρ
129 145 161 177 193 209 225 241
2 ‚ ’ Ά ² Β SP β ς
130 146 162 178 194 210 226 242
3 ƒ “ £ ³ Γ Σ γ σ
131 147 163 179 195 211 227 243
4 „ ” ¤ ΄ Δ Τ δ τ
132 148 164 180 196 212 228 244
5 … • ¥ μ Ε Υ ε υ
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Ζ Φ ζ ϕ
134 150 166 182 198 214 230 246
7 ‡ — § · Η Χ η χ
135 151 167 183 199 215 231 247
8 SP SP ¨ Έ Θ Ψ θ ψ
136 152 168 184 200 216 232 248
9 ‰ ™ © Ή Ι Ω ι ω
137 153 169 185 201 217 233 249
A SP SP ª Ί Κ Ϊ κ ϊ
138 154 170 186 202 218 234 250
B ‹ › « » Λ Ϋ λ ϋ
139 155 171 187 203 219 235 251
C SP SP ¬ Ό Μ ά μ ό
140 156 172 188 204 220 236 252
D SP SP ½ Ν έ ν ύ
141 157 173 189 205 221 237 253
E SP SP ® Ύ Ξ ή ξ ώ
142 158 174 190 206 222 238 254
F SP SP ― Ώ Ο ί ο SP
143 159 175 191 207 223 239 255
148

Appendix
Page 48 (WPC1254: Turkish)
HEX 8 9 A B C D E F
0 € SP SP ° À Ğ à ğ
128 144 160 176 192 208 224 240
1 SP ‘ ¡ ± Á Ñ á ñ
129 145 161 177 193 209 225 241
2 ‚ ’ ¢ ² Â Ò â ò
130 146 162 178 194 210 226 242
3 ƒ “ £ ³ Ã Ó ã ó
131 147 163 179 195 211 227 243
4 „ ” ¤ ´ Ä Ô ä ô
132 148 164 180 196 212 228 244
5 … • ¥ μ Å Õ å õ
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Æ Ö æ ö
134 150 166 182 198 214 230 246
7 ‡ — § · Ç × ç ÷
135 151 167 183 199 215 231 247
8 ˆ ˜ ¨ ¸ È Ø è ø
136 152 168 184 200 216 232 248
9 ‰ ™ © ¹ É Ù é ù
137 153 169 185 201 217 233 249
A Š š ª º Ê Ú ê ú
138 154 170 186 202 218 234 250
B ‹ › « » Ë Û ë û
139 155 171 187 203 219 235 251
C Œ œ ¬ ¼ Ì Ü ì ü
140 156 172 188 204 220 236 252
D SP SP ½ Í İ í ı
141 157 173 189 205 221 237 253
E SP SP ® ¾ Î Ş î ş
142 158 174 190 206 222 238 254
F SP Ÿ ¯ ¿ Ï ß ï ÿ
143 159 175 191 207 223 239 255
149

Page 49 (WPC1255: Hebrew)
HEX 8 9 A B C D E F
0 € SP SP ° ְ ‫׀‬ ‫א‬ ‫נ‬
128 144 160 176 192 208 224 240
1 SP ‘ ¡ ± ֱ ׁ ‫ב‬ ‫ס‬
129 145 161 177 193 209 225 241
2 ‚ ’ ¢ ² ֲ ׂ ‫ג‬ ‫ע‬
130 146 162 178 194 210 226 242
3 ƒ “ £ ³ ֳ ‫׃‬ ‫ד‬ ‫ף‬
131 147 163 179 195 211 227 243
4 „ ” ₪ ´ ִ ‫װ‬ ‫ה‬ ‫פ‬
132 148 164 180 196 212 228 244
5 … • ¥ μ ֵ ‫ױ‬ ‫ו‬ ‫ץ‬
133 149 165 181 197 213 229 245
6 † – ¦ ¶ ֶ ‫ײ‬ ‫ז‬ ‫צ‬
134 150 166 182 198 214 230 246
7 ‡ — § · ַ ‫׳‬ ‫ח‬ ‫ק‬
135 151 167 183 199 215 231 247
8 ˆ ˜ ¨ ¸ ָ ‫״‬ ‫ט‬ ‫ר‬
136 152 168 184 200 216 232 248
9 ‰ ™ © ¹ ֺ SP ‫י‬ ‫ש‬
137 153 169 185 201 217 233 249
A SP SP × ÷ SP SP ‫ך‬ ‫ת‬
138 154 170 186 202 218 234 250
B ‹ › « » ֻ SP ‫כ‬ SP
139 155 171 187 203 219 235 251
C SP SP ¬ ¼ ּ SP ‫ל‬ SP
140 156 172 188 204 220 236 252
D SP SP ½ ֽ SP ‫ם‬ SP
141 157 173 189 205 221 237 253
E SP SP ® ¾ ‫־‬ SP ‫מ‬ SP
142 158 174 190 206 222 238 254
F SP SP ¯ ¿ ֿ SP ‫ן‬ SP
143 159 175 191 207 223 239 255
150

Appendix
Page 50 (WPC1256: Arabic)
HEX 8 9 A B C D E F
0 € ‫گ‬ SP ° ‫ہ‬ ‫ﺫ‬ à ً
128 144 160 176 192 208 224 240
1 ‫پ‬ ‘ ، ± ‫ء‬ ‫ﺭ‬ ‫ﻝ‬ ٌ
129 145 161 177 193 209 225 241
2 ‚ ’ ¢ ² ‫ﺁ‬ ‫ﺯ‬ â ٍ
130 146 162 178 194 210 226 242
3 ƒ “ £ ³ ‫ﺃ‬ ‫ﺱ‬ ‫ﻡ‬ َ
131 147 163 179 195 211 227 243
4 „ ” ¤ ´ ‫ﺅ‬ ‫ﺵ‬ ‫ﻥ‬ ô
132 148 164 180 196 212 228 244
5 … • ¥ μ ‫ﺇ‬ ‫ﺹ‬ ‫ﻫ‬ ُ
133 149 165 181 197 213 229 245
6 † – ¦ ¶ ‫ﺉ‬ ‫ﺽ‬ ‫ﻭ‬ ِ
134 150 166 182 198 214 230 246
7 ‡ — § · ‫ﺍ‬ × ç ÷
135 151 167 183 199 215 231 247
8 ˆ ‫ک‬ ¨ ¸ ‫ﺏ‬ ‫ﻁ‬ è ّ
136 152 168 184 200 216 232 248
9 ‰ ™ © ¹ ‫ﺓ‬ ‫ﻅ‬ é ù
137 153 169 185 201 217 233 249
A ‫ٹ‬ ‫ڑ‬ ‫ﻫ‬ ‫؛‬ ‫ﺕ‬ ‫ﻉ‬ ê ْ
138 154 170 186 202 218 234 250
B ‹ › « » ‫ﺙ‬ ‫ﻍ‬ ë û
139 155 171 187 203 219 235 251
C Œ œ ¬ ¼ ‫ﺝ‬ ‫ـ‬ ‫ﻯ‬ ü
140 156 172 188 204 220 236 252
D ‫چ‬ SP ½ ‫ﺡ‬ ‫ﻑ‬ ‫ﻱ‬ SP
141 157 173 189 205 221 237 253
E ‫ژ‬ SP ® ¾ ‫ﺥ‬ ‫ﻕ‬ î SP
142 158 174 190 206 222 238 254
F ‫ڈ‬ ‫ں‬ ¯ ‫؟‬ ‫ﺩ‬ ‫ﻙ‬ ï ‫ے‬
143 159 175 191 207 223 239 255
151

Page 51 (WPC1257: Baltic Rim)
HEX 8 9 A B C D E F
0 € SP SP ° Ą Š ą š
128 144 160 176 192 208 224 240
1 SP ‘ SP ± Į Ń į ń
129 145 161 177 193 209 225 241
2 ‚ ’ ¢ ² Ā Ņ ā ņ
130 146 162 178 194 210 226 242
3 SP “ £ ³ Ć Ó ć ó
131 147 163 179 195 211 227 243
4 „ ” ¤ ´ Ä Ō ä ō
132 148 164 180 196 212 228 244
5 … • SP μ Å Õ å õ
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Ę Ö ę ö
134 150 166 182 198 214 230 246
7 ‡ — § · Ē × ē ÷
135 151 167 183 199 215 231 247
8 SP SP Ø ø Č Ų č ų
136 152 168 184 200 216 232 248
9 ‰ ™ © ¹ É Ł é ł
137 153 169 185 201 217 233 249
A SP SP Ŗ ŗ Ź Ś ź ś
138 154 170 186 202 218 234 250
B ‹ › « » Ė Ū ė ū
139 155 171 187 203 219 235 251
C SP SP ¬ ¼ Ģ Ü ģ ü
140 156 172 188 204 220 236 252
D ¨ ¯ ½ Ķ Ż ķ ż
141 157 173 189 205 221 237 253
E ˇ ˛ ® ¾ Ī Ž ī ž
142 158 174 190 206 222 238 254
F ¸ SP Æ æ Ļ ß ļ ˙
143 159 175 191 207 223 239 255
152

Appendix
Page 52 (WPC1258: Vientamese)
HEX 8 9 A B C D E F
0 € SP SP ° À Đ à đ
128 144 160 176 192 208 224 240
1 SP ‘ ¡ ± Á Ñ á ñ
129 145 161 177 193 209 225 241
2 ‚ ’ ¢ ² Â ̉ â ̣
130 146 162 178 194 210 226 242
3 ƒ “ £ ³ Ă Ó ă ó
131 147 163 179 195 211 227 243
4 „ ” ¤ ´ Ä Ô ä ô
132 148 164 180 196 212 228 244
5 … • ¥ μ Å Ơ å ơ
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Æ Ö æ ö
134 150 166 182 198 214 230 246
7 ‡ — § · Ç × ç ÷
135 151 167 183 199 215 231 247
8 ˆ ˜ ¨ ¸ È Ø è ø
136 152 168 184 200 216 232 248
9 ‰ ™ © ¹ É Ù é ù
137 153 169 185 201 217 233 249
A SP SP ª º Ê Ú ê ú
138 154 170 186 202 218 234 250
B ‹ › « » Ë Û ë û
139 155 171 187 203 219 235 251
C Œ œ ¬ ¼ ̀ Ü ́ ü
140 156 172 188 204 220 236 252
D SP SP ½ Í Ư í ư
141 157 173 189 205 221 237 253
E SP SP ® ¾ Î ̃ î ₫
142 158 174 190 206 222 238 254
F SP Ÿ ¯ ¿ Ï ß ï ÿ
143 159 175 191 207 223 239 255
153

Page 53 (KZ1048: Kazakhstan)
HEX 8 9 A B C D E F
0 Ђ ђ SP ° А Р а р
128 144 160 176 192 208 224 240
1 Ѓ ‘ Ұ ± Б С б с
129 145 161 177 193 209 225 241
2 ‚ ’ ұ І В Т в т
130 146 162 178 194 210 226 242
3 ѓ “ Ə і Г У г у
131 147 163 179 195 211 227 243
4 „ ” ¤ ө Д Ф д ф
132 148 164 180 196 212 228 244
5 … • Ө μ Е Х е х
133 149 165 181 197 213 229 245
6 † – ¦ ¶ Ж Ц ж ц
134 150 166 182 198 214 230 246
7 ‡ — § · З Ч з ч
135 151 167 183 199 215 231 247
8 € SP Ё ё И Ш и ш
136 152 168 184 200 216 232 248
9 ‰ ™ © № Й Щ й щ
137 153 169 185 201 217 233 249
A Љ љ Ғ ғ К Ъ к ъ
138 154 170 186 202 218 234 250
B ‹ › « » Л Ы л ы
139 155 171 187 203 219 235 251
C Њ њ ¬ ə М Ь м ь
140 156 172 188 204 220 236 252
D Қ қ - Ң Н Э н э
141 157 173 189 205 221 237 253
E Һ һ ® ң О Ю о ю
142 158 174 190 206 222 238 254
F Џ џ Ү ү П Я п я
143 159 175 191 207 223 239 255
154

Appendix
Page 255 (User-Defined Page)
HEX 8 9 A B C D E F
0 SP SP SP SP SP SP SP SP
128 144 160 176 192 208 224 240
129 145 161 177 193 209 225 241
130 146 162 178 194 210 226 242
131 147 163 179 195 211 227 243
132 148 164 180 196 212 228 244
133 149 165 181 197 213 229 245
134 150 166 182 198 214 230 246
135 151 167 183 199 215 231 247
136 152 168 184 200 216 232 248
137 153 169 185 201 217 233 249
A SP SP SP SP SP SP SP SP
138 154 170 186 202 218 234 250
B SP SP SP SP SP SP SP SP
139 155 171 187 203 219 235 251
C SP SP SP SP SP SP SP SP
140 156 172 188 204 220 236 252
D SP SP SP SP SP SP SP SP
141 157 173 189 205 221 237 253
E SP SP SP SP SP SP SP SP
142 158 174 190 206 222 238 254
F SP SP SP SP SP SP SP SP
143 159 175 191 207 223 239 255
155

International Character Sets
ASCII code (Hex)

Country
23 24 25 2A 40 5B 5C 5D 5E 60 7B 7C 7D 7E
USA # $ % * @ [ ¥ ] ^ ` { | } ~
France # $ % * à ° ç § ^ ` é ù è ¨
Germany # $ % * § Ä Ö Ü ^ ` ä ö ü β
U.K. £ $ % * @ [ ¥ ] ^ ` { | } ~
Denmark I # $ % * @ Æ Ø Å ^ ` æ ø å ~
Sweden # ¤ % * É Ä Ö Å Ü é ä ö å ü
Italy # $ % * @ ° ¥ é ^ ù à ò è ì
Spain I Pt $ % * @ ¡ Ñ ¿ ^ ` ¨ ñ } ~
Japan
# $ % * @ [ ¥ ] ^ ` { | } ~
Norway # ¤ % * É Æ Ø Å Ü é æ ø å ü
Denmark II # $ % * É Æ Ø Å Ü é æ ø å ü
Spain II # $ % * á ¡ Ñ ¿ é ` í ñ ó ú
Latin America # $ % * á ¡ Ñ ¿ é ü í ñ ó ú
Korea
# $ % * @ [ W ] ^ ` { | } ~
Slovenia/Croatia # $ % * Ž Š Đ Ć Č ž š đ ć č
China # Ұ % * @ [ ¥ ] ^ ` { | } ~
Vietnum ₫ $ % * @ [ ¥ ] ^ ` { | } ~
Arabia # $ % * @ [ ¥ ] ^ ` { | } ~
156


Technical Reference Guide: Product Overview

Uploaded by

Copyright:

Available Formats

Technical Reference Guide: Product Overview

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Technical Reference Guide: Product Overview

Uploaded by

Copyright:

Available Formats

Technical Reference Guide

Application Development Information

Replacement of the TM-T88IV

Downloaded from www.Manualslib.com manuals search engine

ESC/POS® Command System

Downloaded from www.Manualslib.com manuals search engine

You must follow warnings carefully to avoid serious bodily injury.

Provides information that must be observed to avoid damage to your equipment or a

Provides important information and useful tips.

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Aim of the Manual

Chapter 3 Application Development Information

Chapter 5 Replacement of the TM-T88IV

Appendix Specifications of Interfaces and Connectors

Downloaded from www.Manualslib.com manuals search engine

Product Overview ........................................................................13

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Replacement of the TM-T88IV ....................................................95

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Built-in USB interface

• Serial UB + built-in USB interface model

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Roll paper cover

Cover open button

Power switch cover

Downloaded from www.Manualslib.com manuals search engine

Power Switch Cover

Downloaded from www.Manualslib.com manuals search engine

Parallel interface Power supply

USB Plus Power

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Automatically Recoverable Errors

Error LED flash code

Roll paper The roll paper cover Recovers automatically

Print head A high temperature Recovers automatically

Error LED flash code

Autocutter error Autocutter does not Remove the jammed

Downloaded from www.Manualslib.com manuals search engine

Turn off the power immediately when unrecoverable errors occur.

Error LED flash code

High voltage error

The power supply voltage is extremely

Low voltage error The power supply voltage is extremely low.

CPU execution error The CPU is executing an incorrect address.

Internal circuit Internal circuits are not connected

Downloaded from www.Manualslib.com manuals search engine

See the ESC/POS Application Programming Guide for more details.

Downloaded from www.Manualslib.com manuals search engine

Memory Switches (Customized Value)

Maintenance Counter can be checked with the TM-T88V Utility or in a self-test.