Multi-functional Precision Balances

GX/GF Series

GX-400
(with optional glass breeze break)

GX-600
(with standard breeze break)

ISO
9000 CERTIFIED
The World’s Most User-Friendly
Balances…
Our Super Hybrid Sensor (SHS)*, which combines the best of magnetic
force restoration and single point parallelogram load sensing technologies,
offers you the ultimate in response speed – Just 1 Second! * Patent Approved

Internal Calibration
The GX internal calibration with an internal mass saves time and money. External calibration
requires a great deal of skill and time as well as an expensive external mass. With our internal
calibration with internal mass, the balance can be calibrated very quickly.
■ Automatic self calibration – Self-calibrates automatically when the balance detects ambient
temperature changes
■ One touch automatic calibration – Allows you to calibrate the balance on demand with just
the push of a button

Quick USB Interface (GX-02)

Easy-to-use optional USB interface, with no driver or software installation necessary, for transfer of
weighing data to a computer (Unidirectional communication from a balance to a PC only. Please use
the standard RS-232C interface for sending commands from a PC to the balance.)

GX

ON
Super Hybrid RS-232C GLP Counting Percentage Animal Comparator Auto Power
VFD Display Quick USB Compliant Weighing
Sensor Interface Function Function Function ON
 GF VFD – Vacuum Fluorescent Display • • • • • • • • • •
Large VFD is clearly visible even in a poorly-lit workplace.

GLP/GMP/GCP/ISO Compliant • • • • • • • • • • • • • • • • • • • • • • • •
In accordance with GLP and LIMS regulations, the balance ID number and
calibration data can be printed out using A&D’s AD-8121B or a PC.

ACAI – Automatic Counting Accuracy Improvement

This counting function recalculates the average unit weight each time a sample
is added to eliminate errors caused by variations in unit weight.

Quick Reference Card ••••••••••••••••••••••••••••••

A convenient operating guide is located at the bottom of the balance.

Density Measurement Function • • • • • • • • • • • • • • • • • • • •

An optional Density Determination Kit (GX-13) is available.

Automatic Response Speed Adjustment (GX only)

The response rate is set automatically at either FAST, MID, or SLOW depending
on the environmental conditions. (Manual selection is available for the GF Series.)

GX-13

Auto Power Underhook

M
EC Type Software Internal External
OFF Approval Calibration Calibration

(GX ) (GF )
 GX-200 GX-400 GX-600 GX-800 GX-1000 GX-2000 GX-4000 GX-6100 GX-6000 GX-8000
Specifications GF-200 GF-300 GF-400 GF-600 GF-800 GF-1000 GF-1200 GF-2000 GF-3000 GF-4000 GF-6100 GF-6000 GF-8000
Weighing capacity 210g 310g 410g 610g 810g 1100g 1210g 2100g 3100g 4100g 6100g 6100g 8100g
Minimum weighing value 0.001g 0.01g 0.1g
Repeatability (Standard Deviation) 0.001g 0.01g 0.1g
Linearity ±0.002g ±0.003g ±0.02g ±0.03g ±0.1g
Approx.
Stabilization time (typical at FAST) Approx. 1second Approx. 1.5 seconds Approx. 1 second 1.5seconds Approx. 1 second
±5ppm/°C
Sensitivity drift (10°C to 30°C/50°F-80°F) ±2ppm/°C (When automatic self calibration is not used) (auto-self calibration OFF)

Operating temperature 5°C to 40°C (41°F to 104°F), 85%RH or less (No condensation)
Sensing method Super Hybrid Sensor (SHS) *SHS: Patent approved
Display type Vacuum Fluorescent Display (VFD)
Display refresh rate 5 times/second or 10 times/second

Counting Minimum unit mass 0.001g 0.01g 0.1g

mode Number of samples 10, 25, 50 or 100 pieces

Percent Minimum 100% reference mass 0.100g 1.00g 10.0g

mode Minimum 100% display 0.01%, 0.1%, 1% (Depends on reference mass stored)
Standard serial I/F RS-232C Interface with Windows Communication Tools (WinCT: included as CD-ROM)
Weighing pan 128 x 128mm (5.04 x 5.04 inch) 165 x 165mm (6.50 x 6.50 inch)
Calibration Motor-driven Internal Calibration (GX only)
External dimensions 210(W) x 317(D) x 86(H)mm (8.27 x 12.48 x 3.39 inch)
AC adapter Confirm that the adapter type is correct for the local voltage and power receptacle
Power consumption Approx. 11VA (supplied by AC adapter)
Net weight Approx. 4.6kg(GX)/3.8kg(GF) Approx. 5.1kg(GX)/4.3kg(GF)
Notes: The internal mass is equal to (approximately) 500 grams.
EC Type Approval Confirmed (Approval No. UK2560)
Standard Breeze break included for 1mg minimum weighing value models

Dimensions With
Options Physical Dimensions (mm) Optional Glass Breeze Break (mm)
GX-02 1) Quick USB Interface with cable 454.3
28

317
GX-04 1),2) Comparator Output with a Buzzer/
RS-232C/Current Loop Output
GX-06 1),2) Analog Output/Current Loop Output
GX-10 Glass Breeze Break for 128 x 128mm
A

weighing pan size models

317

244

163

210
GX-11 Glass Breeze Break for 165 x 165mm
weighing pan size models
GX-12 Animal Weighing Pan 162.5
(not available for GX-200 and GF-200)
GX-13 Density Determination Kit for 128 x 128mm
weighing pan size models
45

1) GX-02, GX-04 GX-06 and standard RS-232C cannot be used at the same time.
2) Factory installed option
210

B 231.3 141
Accessories
AD-8121B Dot Matrix Compact Printer
86

AD-8118C Universal Printer

195.5
AD-8920A Remote Display 176
AD-8922 Remote Controller
207.5

AD-1682 Rechargeable Battery Unit

(Maximum operating time: 8 hours)
Pan size (mm)
AD-1683 Static Eliminator
Model A B
AD-1684 Electrostatic Fieldmeter 162.5
GX-200/400/600/800/1000
AD-1689 Tweezers for Calibration Weight 128 128
GF-200/300/400/600/800/1000
AD-8526 Serial/Ethernet Converter GX-2000/4000/6100/6000/8000
165 165
AX-USB-25P Serial/USB Converter GF-1200/2000/3000/4000/6100/6000/8000
86

AX-KO1710-200 USB Converter with a 25P-9P Serial Cable

AX-SW128 RS-232C Cable (25P-9P)
AX-073003691-S Foot Switch
Dust Cover for 128 x 128mm Specifications subject to change for improvement without notice.
AX-073003692-S weighing pan size models
Dust Cover for 165 x 165mm
AX-CARATPAN-W weighing pan size models
AX-CARATPAN-B Carat Pan (Color: silver, 2pcs)
Carat Pan (Color: black, 2pcs)

Connect With Us