Diamond Series

Product Catalog

From standard drive chains to specialty applications,

nothing outlasts a Diamond .®
 Diamond
Chain

Diamond Chain
Difference
Diamond

Company

Dedicated To Producing The Worlds Best Roller Chain

Selection
Guide

Since its founding in 1890, the Diamond Chain Company has been singularly focused on producing the best roller
chain. It’s why the Wright Brothers chose Diamond for their flying machine, why Henry Ford chose Diamond for his
automobile, and why thousands of companies choose Diamond Chain everyday for their needs.

Diamond Chain Company offers two families of roller chain: Diamond Series and Sapphire Series. Diamond
Carbon

Series is the standard offering with industry leading performance, options and features. Sapphire Series is
Steel

an industry competitive chain offering for general applications. This catalog details the Diamond Series only.
& Moisture
Corrosion
Resistant

Industry-leading performance Basic chain offering for

and innovation general applications
Maintenance
Reduced
Attachments
Application
Specific
Horsepower
Tables

Diamond Chain Company is proud to have been based in Indianapolis, Indiana, since its founding and in the
same factory - with many expansions - since 1917. A division of Amsted Industries, Diamond Chain Company
is employee owned and focused on the customer.
Components
Chain
Troubleshooting

Table of Contents
Tools,

Diamond Difference . . . . . . . . . . . . . . . 4 Application Specific . . . . . . . . . . . . . . . 42

Selection Guide . . . . . . . . . . . . . . . . . 6 Horsepower Tables . . . . . . . . . . . . . . . 52
Carbon Steel . . . . . . . . . . . . . . . . . . 8 Chain Components . . . . . . . . . . . . . . . 84
Information
Ordering

Corrosion & Moisture Resistant . . . . . . . . . 22 Tools, Troubleshooting . . . . . . . . . . . . . 86

Reduced Maintenance . . . . . . . . . . . . . 30 Ordering Information . . . . . . . . . . . . . . 92
Attachments . . . . . . . . . . . . . . . . . . 34 Terms and Conditions . . . . . . . . . . . . . . 96
Conditions
Terms and

2 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Difference
Diamond
Delivering Superior Performance and Superior ROI

Selection
Guide
Longer lasting chain results in less downtown and better return on investment
That Diamond Series roller chain is different is evident the moment it is removed from the box. The uniquely beveled
link plates (sizes 60-160) and proprietary lubrication are easily identified, but the real value of these features - and
all the features that comprise “The Diamond Difference” (see pg. 4-5) - are not just seen but experienced. Diamond
Series chain has been independently verified to deliver superior wear life vs. the competition. That comparative wear

Carbon
Steel
test data is listed below; our website also contains numerous Return on Investment (ROI) studies that demonstrate
how long-lasting Diamond Series chain reduces downtime and saves money.

ASME/ANSI 50 Chain Accelerated Wear Testing

& Moisture
Corrosion

Resistant
Diamond Series
MANUFACTURER

Mfg A

Maintenance
Reduced
Mfg B

Mfg C

0 50 100 150 200 250 300 350

Attachments
HOURS
Test conditions: 1,172 RPM; 91 lbs tension, 3.5 chain horsepower, 21T x 21T sprockets

ASME/ANSI 60 Chain Accelerated Wear Testing

Application
Specific
Diamond Series
MANUFACTURER

Mfg A

Horsepower
Mfg B

Tables
Mfg C

0 50 100 150 200 250 300 350 400 450 500

HOURS

Components
Test conditions: 1,725 RPM; 100 lbs tension, 5.2 chain horsepower, 23T x 23T sprockets
Chain

ASME/ANSI 80 Chain Accelerated Wear Testing

Troubleshooting

Diamond Series
Tools,
MANUFACTURER

Mfg A

Mfg B
Information
Ordering

Mfg C

0 100 200 300 400 500 600 700 800 900 1000
HOURS
Test conditions: 668 RPM, 104 lbs tension, 2.8 chain horsepower, 16T x 16T sprockets
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 3

 Diamond
Chain

The Diamond
Difference
Diamond

Difference

More than a Catchphrase – the Diamond Difference is our Commitment to Quality

Selection
Guide

While a roller chain may initially appear to be a simple product, a ten foot section of ANSI #40 chain contains 1,200
parts – each one a potential point for failure. The Diamond Difference is our commitment to quality that ensures you
only receive the highest quality chain for your application.
Carbon
Steel

Materials Heat Treatment

& Moisture
Corrosion
Resistant

The Diamond Difference begins with Strict control of atmosphere, time,

raw materials that meet exacting and temperature optimize the
standards for metal grade, mechanical material properties – increasing
properties and carbon and alloy content strength, durability and wear
to ensure minimization of impurities that resistance.
Maintenance
Reduced

impact tensile and fatigue strength.

Attachments
Application
Specific
Horsepower
Tables
Components
Chain

Fabrication Shot Peening

Diamond Chain designs each component Proprietary shot peening equipment
to exacting dimensional standards for was developed specifically to ensure
optimal performance. Precision ground consistent intensity and coverage of
Troubleshooting

pins, seamless rollers and extruded solid components. Shot peening adds a layer
Tools,

bushings work in concert with link plates of compressive stress that helps the
created using a proprietary multi-stage components resist fatigue failure when
process to maximize the bearing area and exposed to repeated high loads.
thus enable the superior performance of
Diamond Roller Chain.
Information
Ordering
Conditions
Terms and

4 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Difference
Diamond
Selection
Guide
Carbon
Steel
THE BEVEL MATTERS
Diamond Chain Company roller chains

& Moisture
Lubrication

Corrosion

Resistant
Immediately noticeable as different but
are beveled for a simple reason - it allows
truly appreciated over time, Diamond the chain to be stronger. By orienting
chain uses a proprietary lubrication
formula and “hot dip” process on all the link plates, the bearing area of the
lubricated chains for enhanced corrosion

Maintenance
pitch hole is maximized. The bevel allows

Reduced
protection and extended wear life.
automated chain assembly equipment
to properly orient the link plates. Larger
size chains (>160 pitch) are manually

Attachments
assembled and have visual indicators
other than the bevel to allow proper
orientation.

Application
Specific
Horsepower
Tables
Duralube LIVE Roller Chain

Components
Preloading Chain
Following assembly, all chains
are preloaded or “prestressed” to
firmly seat the pins and bushings
Troubleshooting

to reduce initial run-in and extend

Tools,

the wear life of the chain.

Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 5

 Diamond
Chain

Chain Selection Guide

Multiple Considerations must be made when selecting the right roller chain.
Fortunately a Diamond Chain is available for most every application.
Difference
Diamond

Environment General Applications Wet or Corrosive Enviroments

Application General Applications Protection against humidity, water, salt water, caustic chemicals or acids
Selection
Guide

Material Carbon Steel Carbon Steel Stainless Steel

Nomenclature Diamond Chain Nickel Plated Diamond ACE AP Series 300 Series 400 Series

Overview Far exceeding industry Adds nickel plating Adds ACE Our standard and 300 Series Stainless Application specific
ANSI requirements, to Carbon Steel (Anti-Corrosion recommended is intended for stainless steel chain;
Diamond Series chain offers Diamond Chain Exterior) plating stainless steel chain applications requiring reference corrosion
Carbon

superior wear and fatigue for protection in to carbon steel for exposure to superior corrosion tables on pages
Steel

performance in industrial high humidity or diamond chain for caustic chemicals performance, 27-29 to determine
applications water washdown superior protection or acids, AP low magnetic if better solution
Includes: environments. in high humidity, Series offers the permeability, or a than AP series.
Standard Series Carbon steel salt water or best combination “non sparking” chain. Wear performance
Heavy Series substraight provides water washdown of corrosion However, lowest comparable to
High Strength Drive Chain highest strength and environments. resistance and wear wear performance. AP series
& Moisture
Corrosion
Resistant

Power Transmission Chain wear performance Carbon Steel performance

Conveyor Chain substraight provides
Non-standard Series Chain highest strength and
wear performance.

Typical Uses Standard drive chains, Water washdown, food & beverage Food & beverage, packaging, meat processing, baking, fertilizers,
Maintenance
Reduced

industrial/agriculture (non-contact applications) pharmaceuticals, medical

equipment, high strength/
shock load applications

Attachments Yes Yes Yes

Attachments

Available

Page #s 8-21 22-24 22, 25-29

Application
Specific
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

6 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Difference
Diamond
Difficult to Service Environments Application Specific Environment

Reduced maintenance chain where regular Specialty chain for specific tasks Application
lubrication not practical

Selection
Guide
Carbon Steel Application/Chain Dependent Material
EHT Pin Option Duralube LIVE Duralube LIVE Food XLO O-Ring Application Nomenclature
Grade
For high-speed, For moderate Adds a food-grade For dirty applications Bindery Chain Overview
high-temperature speed, moderate lubricant rated for that may cause Thermoforming Chain
and abrassive temperature and clean incidental contact buildup around the Serrated Top Chain

Carbon
environments environments, and ACE plating pin/bushing joint, XLO Pin Oven Chain

Steel
EHT (Enhanced Duralube LIVE uses to Duralube LIVE chains have an O-Ring Curving (Power CURVE®) Chain
Heat Treatment) special bushings with product. design that seals in TUF-FLEX® Chain
pins maintain their integrated lubrication lubrication and seals “Snap-On Top Plate” Chain
hardness across that is released during out contaminants. Micropitch Chain
a wide operating use. Powersports Chain
temperature range Oil & Gas Chain

& Moisture
Corrosion

Resistant
thus providing an Custom Chain
enhanced wear life.
EHT pins are an option
on most carbon steel
chains.

Abrasive environments Fiberglass, cardboard, Food & beverage Combines, hay balers, Typical Uses

Maintenance
Reduced
including cardboard packaging, material (non-contact conveyors, sorters
processing, sawmills, handling applications)
balers, thermoforming,
cement, limestone,
fiberboard, sugar
Yes Already integrated into chain Attachments

Attachments
(where applicable) Available

30-33 42-51 Page #s

Application
Specific
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 7

 Diamond
Chain

Carbon
Difference
Diamond

Steel Chain
Selection
Guide
Carbon
Steel
& Moisture
Corrosion
Resistant
Maintenance
Reduced

Standard Series Roller Chain

Carbon steel is the default material for most roller chain industrial applications due to having the highest
tensile and fatigue strength along with wear performance. See the “Corrosion and Moisture Resistant” section for
Attachments

details on plated carbon steel chain or stainless steel chain that is suitable for water wash downs or exposure to
chemicals or acids.

This section will address the following Carbon Steel chain types, options and performance information.
Application
Specific

Standard Series The Standard Diamond Series chain, this series exceeds ASME/ANSI requirements and offers superior
wear and fatigue performance.
Heavy Series Heavy Series Chain takes the Standard Series and adds thicker link plates for increased fatigue
resistance in applications involving heavy shock loads, multiple start/stops or reversing.
Horsepower

High Strength Same as Heavy Series but with medium carbon through-hardened pins for a higher tensile strength,
Tables

Series working load and fatigue strength (but lower wear performance) vs. Heavy Series chain. For use in high
load, lifting or pulsating applications.
Hoist and Lift Chain Same as Standard Series but with medium carbon through-hardened pins for a higher tension strength,
working load and fatigue strength (but lower wear performance) vs. Standard Series Chain. For use in
hoist and lift applications with tight space requirements.
Components

Double Pitch Utilized primarily for low-speed/low load drives such as those found in agriculture. Double pitch
Chain

Transmission transmission chain is easily identified by its use of figure-eight link plates.
Double Pitch Designed specifically for low-speed/low load conveyor applications. Available in standard or oversized
Conveyor Series rollers, conveyor chain is easily recognized by its use of oval contour link plates.
Troubleshooting

Non-Standard Details on several Diamond Chain products introduced prior to ANSI standards.
Chain
Tools,

 educed Maintenance carbon steel chains (XLO O-Ring, Duralube LIVE, EHT) can be found in the “Reduced
R
Maintenance” section of this catalog.
Information

Attachments for carbon steel chain can be found in the “Attachments” section of this catalog.
Ordering

Horsepower tables can be found in the “Horsepower Tables” section of this catalog.
Conditions
Terms and

8 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
ASME/ANSI Standard Series Chain
#25-50 Pitch: Single and Multiple Strand American
Petroleum

Diamond Standard Series chains are built to ASME/ANSI B29.1 standards. Institute

Difference
Diamond
All standard series chain size 40 and above (except 41) meet API (American Petroleum Institute) requirements.
7F-0003

Single Strand Multiple Strand (-X suffix)

Selection
Guide
CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)

Carbon
Steel
ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table

& Moisture
Corrosion

Resistant
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg
25 0.250 0.125 *.130 0.090 0.030 0.370 0.340 - 0.205 0.238 0.084 875 53
6.35 3.18 3.30 2.29 0.76 9.40 8.64 - 5.21 6.05 0.13 397
25-2 0.250 0.125 *.130 0.090 0.030 0.630 0.590 0.252 0.205 0.238 0.163 1,750 53
6.35 3.18 3.30 2.29 0.76 16.00 14.99 6.40 5.21 6.05 0.24 794

Maintenance
25-3 0.250 0.125 *.130 0.090 0.030 0.880 0.840 0.252 0.205 0.238 0.246 2625 53

Reduced
6.35 3.18 3.30 2.29 0.76 22.35 21.34 6.40 5.21 6.05 0.37 1,191
35 0.375 0.188 *.200 0.141 0.050 0.560 0.500 - 0.308 0.356 0.210 2,100 54
9.53 4.76 5.08 3.58 1.27 14.22 12.70 - 7.82 9.04 0.31 953
35-2 0.375 0.188 *.200 0.141 0.050 0.960 0.900 0.399 0.308 0.356 0.450 4,200 54
9.53 4.76 5.08 3.58 1.27 24.38 22.86 10.13 7.82 9.04 0.67 1,905
35-3 0.375 0.188 *.200 0.141 0.050 1.360 1.310 0.399 0.308 0.356 0.680 6,300 54

Attachments
9.53 4.76 5.08 3.58 1.27 34.54 33.27 10.13 7.82 9.04 1.01 2,858
35-4 0.375 0.188 *.200 0.141 0.050 1.760 1.700 0.399 0.308 0.356 0.910 8,400 54
9.53 4.76 5.08 3.58 1.27 44.70 43.18 10.13 7.82 9.04 1.35 3,810
35-5 0.375 0.188 *.200 0.141 0.050 2.160 2.110 0.399 0.308 0.356 1.140 10,500 54
9.53 4.76 5.08 3.58 1.27 54.86 53.59 10.13 7.82 9.04 1.70 4,763
35-6 0.375 0.188 *.200 0.141 0.050 2.570 2.510 0.399 0.308 0.356 1.370 12,600 54

Application
9.53 4.76 5.08 3.58 1.27 65.28 63.75 10.13 7.82 9.04 2.04 5,715

Specific
40 0.500 0.313 0.312 0.156 0.060 0.720 0.670 - 0.410 0.475 0.410 4,000 55
12.70 7.94 7.92 3.96 1.52 18.29 17.02 - 10.41 12.07 0.61 1,814
40-2 0.500 0.313 0.312 0.156 0.060 1.290 1.240 0.566 0.410 0.475 0.800 8,000 55
12.70 7.94 7.92 3.96 1.52 32.77 31.50 14.38 10.41 12.07 1.19 3,629
40-3 0.500 0.313 0.312 0.156 0.060 1.850 1.800 0.566 0.410 0.475 1.200 12,000 55
12.70 7.94 7.92 3.96 1.52 46.99 45.72 14.38 10.41 12.07 1.79 5,443

Horsepower
40-4 0.500 0.313 0.312 0.156 0.060 2.420 2.370 0.566 0.410 0.475 1.600 16,000 55

Tables
12.70 7.94 7.92 3.96 1.52 61.47 60.20 14.38 10.41 12.07 2.38 7,257
40-6 0.500 0.313 0.312 0.156 0.060 3.560 3.510 0.566 0.410 0.475 2.420 24,000 55
12.70 7.94 7.92 3.96 1.52 90.42 89.15 14.38 10.41 12.07 3.60 10,886
41 0.500 0.250 0.306 0.141 0.050 0.650 0.570 - 0.310 0.383 0.260 2,400 56
12.70 6.35 7.77 3.58 1.27 16.51 14.48 - 7.87 9.73 0.39 1,089

Components
50 0.625 0.375 0.400 0.200 0.080 0.890 0.830 - 0.512 0.594 0.680 6,600 57
15.88 9.53 10.16 5.08 2.03 22.61 21.08 - 13.00 15.09 1.01 2,994
50-2 0.625 0.375 0.400 0.200 0.080 1.600 1.550 0.713 0.512 0.594 1.320 13,200 57 Chain
15.88 9.53 10.16 5.08 2.03 40.64 39.37 18.11 13.00 15.09 1.96 5,987
50-3 0.625 0.375 0.400 0.200 0.080 2.310 2.260 0.713 0.512 0.594 1.980 19,800 57
15.88 9.53 10.16 5.08 2.03 58.67 57.40 18.11 13.00 15.09 2.95 8,981
Troubleshooting

50-4 0.625 0.375 0.400 0.200 0.080 3.030 2.970 0.713 0.512 0.594 2.640 26,400 57
15.88 9.53 10.16 5.08 2.03 76.96 75.44 18.11 13.00 15.09 3.93 11,975
Tools,

50-5 0.625 0.375 0.400 0.200 0.080 3.750 3.690 0.713 0.512 0.594 3.300 33,000 57
15.88 9.53 10.16 5.08 2.03 95.25 93.73 18.11 13.00 15.09 4.91 14,969
50-6 0.625 0.375 0.400 0.200 0.080 4.460 4.400 0.713 0.512 0.594 3.960 39,600 57
15.88 9.53 10.16 5.08 2.03 113.28 111.76 18.11 13.00 15.09 5.89 17,962
50-8 0.625 0.375 0.400 0.200 0.080 5.890 5.830 0.713 0.512 0.594 5.300 52,800 57
15.88 9.53 10.16 5.08 2.03 149.61 148.08 18.11 13.00 15.09 7.89 23,950
Information
Ordering

50-10 0.625 0.375 0.400 0.200 0.080 7.320 7.260 0.713 0.512 0.594 6.620 66,000 57
15.88 9.53 10.16 5.08 2.03 185.93 184.40 18.11 13.00 15.09 9.85 29,937
* Chain is rollerless. Dimension shown is bushing diameter.
** Maximum value listed.
† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
Conditions
Terms and

1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.

diamondchain.com | 1-800 US CHAIN (872-4246) 9

 Diamond
Chain

ASME/ANSI Standard Series Chain

#60-100 Pitch: Single and Multiple Strand American
Petroleum
Institute
Difference
Diamond

Single Strand Multiple Strand (-X suffix)

7F-0003

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
Selection

COTTERED (C)
Guide

ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO

RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)
Carbon
Steel

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg
60 0.750 0.500 0.469 0.234 0.094 1.110 1.040 - 0.615 0.713 0.990 8,500 58
& Moisture
Corrosion
Resistant

19.05 12.70 11.91 5.94 2.39 28.19 26.41 - 15.62 18.11 1.47 3,856
Standard SeriesReduced

60-2 0.750 0.500 0.469 0.234 0.094 2.010 1.940 0.897 0.615 0.713 1.950 17,000 58
19.05 12.70 11.91 5.94 2.39 51.05 49.28 22.78 15.62 18.11 2.90 7,711
60-3 0.750 0.500 0.469 0.234 0.094 2.910 2.840 0.897 0.615 0.713 2.880 25,500 58
19.05 12.70 11.91 5.94 2.39 73.91 72.14 22.78 15.62 18.11 4.29 11,567
60-4 0.750 0.500 0.469 0.234 0.094 3.810 3.740 0.897 0.615 0.713 3.900 34,000 58
Maintenance

19.05 12.70 11.91 5.94 2.39 96.77 95.00 22.78 15.62 18.11 5.80 15,422
60-5 0.750 0.500 0.469 0.234 0.094 4.710 4.640 0.897 0.615 0.713 4.970 42,500 58
19.05 12.70 11.91 5.94 2.39 119.63 117.86 22.78 15.62 18.11 7.40 19,278
60-6 0.750 0.500 0.469 0.234 0.094 5.600 5.530 0.897 0.615 0.713 5.960 51,000 58
19.05 12.70 11.91 5.94 2.39 142.24 140.46 22.78 15.62 18.11 8.87 23,133
60-8 0.750 0.500 0.469 0.234 0.094 7.400 7.330 0.897 0.615 0.713 7.940 68,000 58
Attachments

19.05 12.70 11.91 5.94 2.39 187.96 186.18 22.78 15.62 18.11 11.82 30,844
60-10 0.750 0.500 0.469 0.234 0.094 9.190 9.120 0.897 0.615 0.713 9.920 8,500 58
19.05 12.70 11.91 5.94 2.39 233.43 231.65 22.78 15.62 18.11 14.76 3,856
80 1.000 0.625 0.625 0.312 0.125 1.440 1.320 - 0.820 0.950 1.730 14,500 59
25.40 15.88 15.88 7.92 3.18 36.58 33.53 - 20.83 24.13 2.57 6,577
80-2 1.000 0.625 0.625 0.312 0.125 2.590 2.470 1.153 0.820 0.950 3.370 29,000 59
25.40 15.88 15.88 7.92 3.18 65.79 62.74 29.29 20.83 24.13 5.02 13,154
Application

80-3 1.000 0.625 0.625 0.312 0.125 3.740 3.620 1.153 0.820 0.950 5.020 43,500 59
Specific

25.40 15.88 15.88 7.92 3.18 95.00 91.95 29.29 20.83 24.13 7.47 19,731
80-4 1.000 0.625 0.625 0.312 0.125 4.900 4.790 1.153 0.820 0.950 6.730 58,000 59
25.40 15.88 15.88 7.92 3.18 124.46 121.67 29.29 20.83 24.13 10.02 26,308
80-5 1.000 0.625 0.625 0.312 0.125 6.060 5.940 1.153 0.820 0.950 8.400 72,500 59
25.40 15.88 15.88 7.92 3.18 153.92 150.88 29.29 20.83 24.13 12.50 32,885
Horsepower

80-6 1.000 0.625 0.625 0.312 0.125 7.220 7.100 1.153 0.820 0.950 10.070 87,000 59
25.40 15.88 15.88 7.92 3.18 183.39 180.34 29.29 20.83 24.13 14.99 39,463
Tables

80-8 1.000 0.625 0.625 0.312 0.125 9.530 9.400 1.153 0.820 0.950 13.410 116,000 59
25.40 15.88 15.88 7.92 3.18 242.06 238.76 29.29 20.83 24.13 19.96 52,617
100 1.250 0.750 0.750 0.375 0.156 1.730 1.610 - 1.025 1.188 2.510 24,000 60
31.75 19.05 19.05 9.53 3.96 43.94 40.89 - 26.04 30.18 3.74 10,886
100-2 1.250 0.750 0.750 0.375 0.156 3.140 3.020 1.408 1.025 1.188 4.910 48,000 60
Components

31.75 19.05 19.05 9.53 3.96 79.76 76.71 35.76 26.04 30.18 7.31 21,772
Chain

100-3 1.250 0.750 0.750 0.375 0.156 4.560 4.430 1.408 1.025 1.188 7.400 72,000 60
31.75 19.05 19.05 9.53 3.96 115.82 112.52 35.76 26.04 30.18 11.01 32,659
100-4 1.250 0.750 0.750 0.375 0.156 5.970 5.840 1.408 1.025 1.188 9.800 96,000 60
31.75 19.05 19.05 9.53 3.96 151.64 148.34 35.76 26.04 30.18 14.58 43,545
100-5 1.250 0.750 0.750 0.375 0.156 7.380 7.250 1.408 1.025 1.188 12.200 120,000 60
Troubleshooting

31.75 19.05 19.05 9.53 3.96 187.45 184.15 35.76 26.04 30.18 18.16 54,431
100-6 1.250 0.750 0.750 0.375 0.156 8.780 8.660 1.408 1.025 1.188 14.600 144,000 60
Tools,

31.75 19.05 19.05 9.53 3.96 223.01 219.96 35.76 26.04 30.18 21.73 65,317
100-8 1.250 0.750 0.750 0.375 0.156 11.600 11.480 1.408 1.025 1.188 19.400 192,000 60
31.75 19.05 19.05 9.53 3.96 294.64 291.59 35.76 26.04 30.18 28.87 87,090
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

10 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
ASME/ANSI Standard Series Chain
#120-180 Pitch: Single and Multiple Strand American
Petroleum
Institute

Difference
Diamond
Single Strand Multiple Strand (-X suffix)
7F-0003

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,

Selection
COTTERED (C)

Guide
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)

Carbon
Steel
ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg

& Moisture
120 1.500 1.000 0.875 0.437 0.187 2.140 2.000 - 1.230 1.425 3.690 34,000 61

Corrosion

Resistant
38.10 25.40 22.23 11.10 4.75 54.36 50.80 - 31.24 36.20 5.49 15,422
120-2 1.500 1.000 0.875 0.437 0.187 3.930 3.790 1.789 1.230 1.425 7.350 68,000 61
38.10 25.40 22.23 11.10 4.75 99.82 96.27 45.44 31.24 36.20 10.94 30,844
120-3 1.500 1.000 0.875 0.437 0.187 5.720 5.580 1.789 1.230 1.425 11.100 102,000 61
38.10 25.40 22.23 11.10 4.75 145.29 141.73 45.44 31.24 36.20 16.52 46,266
120-4 1.500 1.000 0.875 0.437 0.187 7.520 7.380 1.789 1.230 1.425 14.700 136,000 61

Maintenance
Reduced
38.10 25.40 22.23 11.10 4.75 191.01 187.45 45.44 31.24 36.20 21.88 61,689
120-5 1.500 1.000 0.875 0.437 0.187 9.310 9.170 1.789 1.230 1.425 18.430 170,000 61
38.10 25.40 22.23 11.10 4.75 236.47 232.92 45.44 31.24 36.20 27.43 77,111
120-6 1.500 1.000 0.875 0.437 0.187 11.100 10.960 1.789 1.230 1.425 22.110 204,000 61
38.10 25.40 22.23 11.10 4.75 281.94 278.38 45.44 31.24 36.20 32.90 92,533
120-8 1.500 1.000 0.875 0.437 0.187 14.680 14.540 1.789 1.230 1.425 29.470 272,000 61

Attachments
38.10 25.40 22.23 11.10 4.75 372.87 369.32 45.44 31.24 36.20 43.86 123,377
120-10 1.500 1.000 0.875 0.437 0.187 18.260 18.120 1.789 1.230 1.425 36.830 340,000 61
38.10 25.40 22.23 11.10 4.75 463.80 460.25 45.44 31.24 36.20 54.81 154,221
140 1.750 1.000 1.000 0.500 0.219 2.310 2.140 - 1.435 1.663 5.000 46,000 62
44.45 25.40 25.40 12.70 5.56 58.67 54.36 - 36.45 42.24 7.44 20,865
140-2 1.750 1.000 1.000 0.500 0.219 4.240 4.070 1.924 1.435 1.663 9.650 92,000 62
44.45 25.40 25.40 12.70 5.56 107.70 103.38 48.87 36.45 42.24 14.36 41,730

Application
140-3 1.750 1.000 1.000 0.500 0.219 6.160 6.000 1.924 1.435 1.663 14.300 138,000 62

Specific
44.45 25.40 25.40 12.70 5.56 156.46 152.40 48.87 36.45 42.24 21.28 62,596
140-4 1.750 1.000 1.000 0.500 0.219 8.090 7.930 1.924 1.435 1.663 18.950 184,000 62
44.45 25.40 25.40 12.70 5.56 205.49 201.42 48.87 36.45 42.24 28.20 83,461
140-6 1.750 1.000 1.000 0.500 0.219 11.940 11.780 1.924 1.435 1.663 28.250 276,000 62
44.45 25.40 25.40 12.70 5.56 303.28 299.21 48.87 36.45 42.24 42.04 125,191

Horsepower
160 2.000 1.250 1.125 0.562 0.250 2.730 2.540 - 1.640 1.900 6.530 58,000 63
50.80 31.75 28.58 14.27 6.35 69.34 64.52 - 41.66 48.26 9.72 26,308

Tables
160-2 2.000 1.250 1.125 0.562 0.250 5.040 4.850 2.305 1.640 1.900 12.830 116,000 63
50.80 31.75 28.58 14.27 6.35 128.02 123.19 58.55 41.66 48.26 19.09 52,617
160-3 2.000 1.250 1.125 0.562 0.250 7.350 7.160 2.305 1.640 1.900 19.030 174,000 63
50.80 31.75 28.58 14.27 6.35 186.69 181.86 58.55 41.66 48.26 28.32 78,925
160-4 2.000 1.250 1.125 0.562 0.250 9.660 9.470 2.305 1.640 1.900 25.600 232,000 63

Components
50.80 31.75 28.58 14.27 6.35 245.36 240.54 58.55 41.66 48.26 38.10 105,233

Chain
160-6 2.000 1.250 1.125 0.562 0.250 14.270 14.090 2.305 1.640 1.900 37.780 348,000 63
50.80 31.75 28.58 14.27 6.35 362.46 357.89 58.55 41.66 48.26 56.22 157,850
180 2.250 1.406 1.406 0.687 0.281 3.150 2.880 - 1.845 2.138 9.060 76,000 64
57.15 35.72 35.71 17.45 7.14 80.01 73.15 - 46.86 54.31 13.48 34,473
180-2 2.250 1.406 1.406 0.687 0.281 5.750 5.480 2.592 1.845 2.138 17.670 152,000 64
Troubleshooting

57.15 35.72 35.71 17.45 7.14 146.05 139.19 65.84 46.86 54.31 26.30 68,946
180-3 2.250 1.406 1.406 0.687 0.281 8.340 8.070 2.592 1.845 2.138 26.200 228,000 64
Tools,

57.15 35.72 35.71 17.45 7.14 211.84 204.98 65.84 46.86 54.31 38.99 103,419
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 11

 Diamond
Chain

ASME/ANSI Standard Series Chain

#200-240 Pitch: Single and Multiple Strand American
Petroleum
Institute
Difference
Diamond

Single Strand Multiple Strand (-X suffix)

7F-0003

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
Selection

COTTERED (C)
Guide

ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO

RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)
Carbon
Steel

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg
200 2.500 1.500 1.562 0.781 0.312 3.440 3.120 - 2.050 2.375 10.650 95,000 65
& Moisture
Corrosion
Resistant

63.50 38.10 39.67 19.84 7.92 87.38 79.25 - 52.07 60.33 15.85 43,091
200-2 2.500 1.500 1.562 0.781 0.312 6.260 5.940 2.817 2.050 2.375 21.500 190,000 65
63.50 38.10 39.67 19.84 7.92 159.00 150.88 71.55 52.07 60.33 32.00 86,182
200-3 2.500 1.500 1.562 0.781 0.312 9.080 8.760 2.817 2.050 2.375 32.300 285,000 65
63.50 38.10 39.67 19.84 7.92 230.63 222.50 71.55 52.07 60.33 48.07 129,274
200-4 2.500 1.500 1.562 0.781 0.312 11.900 11.580 2.817 2.050 2.375 42.900 380,000 65
Maintenance

63.50 38.10 39.67 19.84 7.92 302.26 294.13 71.55 52.07 60.33 63.84 172,365
Reduced

200-6 2.500 1.500 1.562 0.781 0.312 17.520 17.210 2.817 2.050 2.375 64.500 570,000 65
63.50 38.10 39.67 19.84 7.92 445.01 437.13 71.55 52.07 60.33 95.99 258,547
240 3.000 1.875 1.875 0.937 0.375 4.320 3.830 - 2.422 2.806 17.030 157,600 66
76.20 47.63 47.63 23.80 9.53 109.73 97.28 - 61.52 71.27 25.34 71,486
240-2 3.000 1.875 1.875 0.937 0.375 7.770 7.270 3.458 2.422 2.806 33.440 315,200 66
76.20 47.63 47.63 23.80 9.53 197.36 184.66 87.83 61.52 71.27 49.76 142,972
Attachments
Application
Specific
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

12 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
ASME/ANSI Heavy Series Chain
#60H-120H Pitch: Single and Multiple Strand
Heavy series chain utilize link plates with the thickness of the next larger size chain. The thicker link plate material

Difference
Diamond
provides an increase in fatigue resistance for drives subjected to heavy shock loads, multiple stops/starts or reversing.
Diamond Heavy Series chains are built to ASME/ANSI B29.1 standards. American
Petroleum
Institute

All Heavy Series chain meets API (American Petroleum Institute) requirements.

Selection
Single Strand Multiple Strand (-X suffix) 7F-0003

Guide
CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R)

Carbon
CENTER (K)

Steel
ROLLER LINK PIN LINK
HEIGHT (H) HEIGHT (E)

& Moisture
Corrosion

Resistant
ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg
60H 0.750 0.500 0.469 0.234 0.125 1.240 1.170 - 0.615 0.713 1.180 8,500 67
19.05 12.70 11.91 5.94 3.18 31.50 29.72 - 15.62 18.11 1.76 3,856

Maintenance
Reduced
60H-2 0.750 0.500 0.469 0.234 0.125 2.270 2.200 1.028 0.615 0.713 2.330 17,000 67
19.05 12.70 11.91 5.94 3.18 57.66 55.88 26.11 15.62 18.11 3.47 7,711
60H-3 0.750 0.500 0.469 0.234 0.125 3.310 3.240 1.028 0.615 0.713 3.470 25,500 67
19.05 12.70 11.91 5.94 3.18 84.07 82.30 26.11 15.62 18.11 5.16 11,567
60H-4 0.750 0.500 0.469 0.234 0.125 4.340 4.260 1.028 0.615 0.713 4.610 34,000 67
19.05 12.70 11.91 5.94 3.18 110.24 108.20 26.11 15.62 18.11 6.86 15,422

Attachments
80H 1.000 0.625 0.625 0.312 0.156 1.570 1.450 - 0.820 0.950 2.020 14,500 68
25.40 15.88 15.88 7.92 3.96 39.88 36.83 - 20.83 24.13 3.01 6,577
80H-2 1.000 0.625 0.625 0.312 0.156 2.840 2.720 1.283 0.820 0.950 3.930 29,000 68
25.40 15.88 15.88 7.92 3.96 72.14 69.09 32.59 20.83 24.13 5.85 13,154
80H-3 1.000 0.625 0.625 0.312 0.156 4.140 4.020 1.283 0.820 0.950 5.920 43,500 68
25.40 15.88 15.88 7.92 3.96 105.16 102.11 32.59 20.83 24.13 8.81 19,731
80H-4 1.000 0.625 0.625 0.312 0.156 5.420 5.300 1.283 0.820 0.950 7.870 58,000 68

Application
25.40 15.88 15.88 7.92 3.96 137.67 134.62 32.59 20.83 24.13 11.71 26,308

Specific
100H 1.250 0.750 0.750 0.375 0.187 1.860 1.740 - 1.025 1.188 2.820 24,000 69
31.75 19.05 19.05 9.53 4.75 47.24 44.20 - 26.04 30.18 4.20 10,886
100H-2 1.250 0.750 0.750 0.375 0.187 3.410 3.280 1.539 1.025 1.188 5.580 48,000 69
31.75 19.05 19.05 9.53 4.75 86.61 83.31 39.09 26.04 30.18 8.30 21,772
100H-3 1.250 0.750 0.750 0.375 0.187 4.950 4.820 1.539 1.025 1.188 8.320 72,000 69

Horsepower
31.75 19.05 19.05 9.53 4.75 125.73 122.43 39.09 26.04 30.18 12.38 32,659
100H-4 1.250 0.750 0.750 0.375 0.187 6.490 6.370 1.539 1.025 1.188 11.040 96,000 69

Tables
31.75 19.05 19.05 9.53 4.75 164.85 161.80 39.09 26.04 30.18 16.43 43,545
120H 1.500 1.000 0.875 0.437 0.219 2.270 2.130 - 1.230 1.425 4.080 34,000 70
38.10 25.40 22.23 11.10 5.56 57.66 54.10 - 31.24 36.20 6.07 15,422
120H-2 1.500 1.000 0.875 0.437 0.219 4.200 4.060 1.924 1.230 1.425 8.040 68,000 70
38.10 25.40 22.23 11.10 5.56 106.68 103.12 48.87 31.24 36.20 11.96 30,844

Components
120H-3 1.500 1.000 0.875 0.437 0.219 6.130 5.990 1.924 1.230 1.425 11.990 102,000 70

Chain
38.10 25.40 22.23 11.10 5.56 155.70 152.15 48.87 31.24 36.20 17.84 46,266
120H-4 1.500 1.000 0.875 0.437 0.219 8.060 7.920 1.924 1.230 1.425 15.940 136,000 70
38.10 25.40 22.23 11.10 5.56 204.72 201.17 48.87 31.24 36.20 23.72 61,689
120H-6 1.500 1.000 0.875 0.437 0.219 11.910 11.770 1.924 1.230 1.425 23.840 204,000 70
38.10 25.40 22.23 11.10 5.56 302.51 298.96 48.87 31.24 36.20 35.48 92,533
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 13

 Diamond
Chain

ASME/ANSI Heavy Series Chain

#140H-240H Pitch: Single and Multiple Strand American
Petroleum
Institute
Difference
Diamond

Single Strand Multiple Strand (-X suffix)

7F-0003

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
Selection

COTTERED (C)
Guide

ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO

RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)
Carbon
Steel

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg
140H 1.750 1.000 1.000 0.500 0.250 2.440 2.280 - 1.435 1.663 5.400 46,000 71
& Moisture
Corrosion
Resistant

44.45 25.40 25.40 12.70 6.35 61.98 57.91 - 36.45 42.24 8.04 20,865
140H-2 1.750 1.000 1.000 0.500 0.250 4.500 4.340 2.055 1.435 1.663 10.650 92,000 71
44.45 25.40 25.40 12.70 6.35 114.30 110.24 52.20 36.45 42.24 15.85 41,730
140H-3 1.750 1.000 1.000 0.500 0.250 6.560 6.39 2.055 1.435 1.663 15.900 138,000 71
44.45 25.40 25.40 12.70 6.35 166.62 162.31 52.20 36.45 42.24 23.66 62,596
140H-4 1.750 1.000 1.000 0.500 0.250 8.620 8.450 2.055 1.435 1.663 21.100 184,000 71
Maintenance

44.45 25.40 25.40 12.70 6.35 218.95 214.63 52.20 36.45 42.24 31.40 83,461
Reduced

160H 2.000 1.250 1.125 0.562 0.281 2.860 2.680 - 1.640 1.900 7.030 58,000 72
50.80 31.75 28.58 14.27 7.14 72.64 68.07 - 41.66 48.26 10.46 26,308
160H-2 2.000 1.250 1.125 0.562 0.281 5.300 5.120 2.436 1.640 1.900 13.880 116,000 72
50.80 31.75 28.58 14.27 7.14 134.62 130.05 61.87 41.66 48.26 20.66 52,617
160H-3 2.000 1.250 1.125 0.562 0.281 7.750 7.560 2.436 1.640 1.900 20.680 174,000 72
50.80 31.75 28.58 14.27 7.14 196.85 192.02 61.87 41.66 48.26 30.78 78,925
Attachments

160H-4 2.000 1.250 1.125 0.562 0.281 10.170 10.000 2.436 1.640 1.900 27.620 232,000 72
50.80 31.75 28.58 14.27 7.14 258.32 254.00 61.87 41.66 48.26 41.10 105,233
180H 2.250 1.406 1.406 0.687 0.312 3.280 3.010 - 1.845 2.138 9.590 76,000 73
57.15 35.72 35.71 17.45 7.92 83.31 76.45 - 46.86 54.31 14.27 34,473
180H-2 2.250 1.406 1.406 0.687 0.312 6.000 5.730 2.723 1.845 2.138 18.860 152,000 73
57.15 35.72 35.71 17.45 7.92 152.40 145.54 69.16 46.86 54.31 28.07 68,946
180H-3 2.250 1.406 1.406 0.687 0.312 8.730 8.460 2.723 1.845 2.138 28.140 228,000 73
Application
Specific

57.15 35.72 35.71 17.45 7.92 221.74 214.88 69.16 46.86 54.31 41.88 103,419
200H 2.500 1.500 1.562 0.781 0.375 3.710 3.390 - 2.050 2.375 13.380 110,000 74
63.50 38.10 39.67 19.84 9.53 94.23 86.11 - 52.07 60.33 19.91 49,895
200H-2 2.500 1.500 1.562 0.781 0.375 6.790 6.480 3.083 2.050 2.375 26.380 220,000 74
63.50 38.10 39.67 19.84 9.53 172.47 164.59 78.31 52.07 60.33 39.26 99,790
200H-3 2.500 1.500 1.562 0.781 0.375 9.880 9.560 3.083 2.050 2.375 40.850 330,000 74
Horsepower

63.50 38.10 39.67 19.84 9.53 250.95 242.82 78.31 52.07 60.33 60.79 149,685
Tables

240H 3.000 1.875 1.875 0.937 0.500 4.850 4.350 - 2.422 2.806 21.080 157,600 75
76.20 47.63 47.63 23.80 12.70 123.19 110.49 - 61.52 71.27 31.37 71,486
Components
Chain
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

14 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
ASME/ANSI High Strength Drive Chain
#60HS-240HS Pitch: Single and Multiple Strand
Diamond High Strength Drive chain is dimensionally identical to the Heavy Series Drive chain but built with medium

Difference
Diamond
carbon through-hardened alloy steel pins for a higher tensile strength, working load and fatigue strength (when
compared to a heavy series chain) in high load, lifting or pulsating applications.
For added performance in high load fatigue applications, Diamond HS Oval Contour chain (identifiable by “OC” suffix
in part number) utilizes full oval contour link plates for greater link plate rigidity.
Note: Offset links and slip-fit connecting links are not recommended for any high strength drive chain.

Selection
Guide
Single Strand Multiple Strand (-X suffix) Oval Contour (OC suffix)

CHAIN WIDTH, ROLLER CHAIN WIDTH,

CHAIN WIDTH, ROLLER CHAIN WIDTH, RIVETED (R) WIDTH COTTERED (C)
RIVETED (R) WIDTH COTTERED (C)

Carbon
Steel
CHAIN ROLLER DIAMETER PITCH
ROLLER DIAMETER PITCH CENTER TO CHAIN WIDTH,
WIDTH,
RIVETED (R) CENTER (K) COTTERED (C)
ROLLER LINK PIN LINK ROLLER LINK
HEIGHT (H) HEIGHT (E) HEIGHT (H)

& Moisture
Corrosion

Resistant
Diamond Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile
Number Diameter Diameter Thickness Strength†
in in in in in in in in in in lbs/ft lbs
mm mm mm mm mm mm mm mm mm mm kg/m kg
60HS 0.750 0.500 0.469 0.234 0.125 1.240 1.170 - 0.615 0.713 1.180 12,000
19.05 12.70 11.91 5.94 3.18 31.50 29.72 - 15.62 18.11 1.76 5,443

Maintenance
60HSOC 0.750 0.500 0.469 0.234 0.125 1.240 1.170 - 0.713 0.713 1.420 12,000

Reduced
19.05 12.70 11.91 5.94 3.18 31.50 29.72 - 18.11 18.11 2.11 5,443
80HS 1.000 0.625 0.625 0.312 0.156 1.570 1.450 - 0.820 0.950 2.020 21,000
25.40 15.88 15.88 7.92 3.96 39.88 36.83 - 20.83 24.13 3.01 9,525
80HSOC 1.000 0.625 0.625 0.312 0.156 1.570 1.450 - 0.950 0.950 2.380 21,000
25.40 15.88 15.88 7.92 3.96 39.88 36.83 - 24.13 24.13 3.54 9,525
100HS 1.250 0.750 0.750 0.375 0.187 1.860 1.740 - 1.025 1.188 2.820 30,000

Attachments
31.75 19.05 19.05 9.53 4.75 47.24 44.20 - 26.04 30.18 4.20 13,608
100HSOC 1.250 0.750 0.750 0.375 0.187 1.860 1.740 - 1.188 1.188 3.290 30,000
31.75 19.05 19.05 9.53 4.75 47.24 44.20 - 30.18 30.18 4.90 13,608
120HS 1.500 1.000 0.875 0.437 0.219 2.270 2.130 - 1.230 1.425 4.080 41,000
38.10 25.40 22.23 11.10 5.56 57.66 54.10 - 31.24 36.20 6.07 18,597
140HS 1.750 1.000 1.000 0.500 0.250 2.440 2.280 - 1.435 1.663 5.400 56,000
44.45 25.40 25.40 12.70 6.35 61.98 57.91 - 36.45 42.24 8.04 25,401

Application
Specific
160HS 2.000 1.250 1.125 0.562 0.281 2.860 2.680 - 1.640 1.900 7.030 70,000
50.80 31.75 28.58 14.27 7.14 72.64 68.07 - 41.66 48.26 10.46 31,751
180HS 2.250 1.406 1.406 0.687 0.312 3.280 3.010 - 1.845 2.138 9.590 95,000
57.15 35.72 35.71 17.45 7.92 83.31 76.45 - 46.86 54.31 14.27 43,091
200HS 2.500 1.500 1.562 0.781 0.375 3.710 3.390 - 2.050 2.375 13.750 136,000
63.50 38.10 39.67 19.84 9.53 94.23 86.11 - 52.07 60.33 20.46 61,689

Horsepower
200HS-2 2.500 1.500 1.562 0.781 0.375 6.790 6.480 3.083 2.050 2.375 26.380 270,000

Tables
63.50 38.10 39.67 19.84 9.53 172.47 164.59 78.31 52.07 60.33 39.26 122,470
200HS-3 2.500 1.500 1.562 0.781 0.375 9.880 9.560 3.083 2.050 2.375 40.850 405,000
63.50 38.10 39.67 19.84 9.53 250.95 242.82 78.31 52.07 60.33 60.79 183,705
240HS 3.000 1.875 1.875 0.937 0.500 4.850 4.350 - 2.422 2.806 21.080 157,600
76.20 47.63 47.63 23.80 12.70 123.19 110.49 - 61.52 71.27 31.37 71,486

Components
Chain
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 15

 Diamond
Chain

Hoist and Lift Chain

#60-120 Pitch
Hoist Chain is dimensionally identical to the Standard Series chain but built with medium carbon through-hardened
Difference
Diamond

alloy steel pins for higher working load capacity and resistance to fatigue. Wear life may be slightly reduced due to the
material and heat treatment of the chain pins.
Rollerless Lift Chain is designed for tension linkages where frequent articulation requires the bearing area of the
chain to be increased. These chains are dimensionally identical to the Standard Series chain except without rollers.
See the following page for Hoist and Lift Chain terminal fitting information.
Selection
Guide

Note: Offset links and slip-fit connecting links are not available for hoist or lift chains.

Single Strand
Carbon
Steel

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)
& Moisture
Corrosion
Resistant

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)

Diamond Pitch Roller Width Roller Pin Link Plate C R E** H** Avg. Weight Avg. Tensile
Maintenance

Number Diameter Diameter Thickness Strength

Reduced

in in in in in in in in in lbs/ft lbs/ft
mm mm mm mm mm mm mm mm mm kg/m kg/m
Hoist Chain
625 0.625 0.375 0.400 0.200 0.080 0.890 0.830 0.512 0.594 0.680 8,000
15.88 9.53 10.16 5.08 2.03 22.61 21.08 13.00 15.09 1.01 3,629
Attachments

750 0.750 0.500 0.469 0.234 0.094 1.110 1.040 0.615 0.713 0.990 10,500
19.05 12.70 11.91 5.94 2.39 28.19 26.42 15.62 18.11 1.47 4,763
Rollerless Lift Chain
55S 0.625 0.375 *.280 0.200 0.080 0.890 0.830 0.512 0.594 0.550 8,000
15.88 9.53 7.11 5.08 2.03 22.61 21.08 13.00 15.09 0.82 3,629
65S 0.750 0.500 *.332 0.234 0.094 1.110 1.040 0.615 0.713 0.810 10,500
19.05 12.70 8.43 5.94 2.39 28.19 26.42 15.62 18.11 1.21 4,763
Application
Specific

85 1.000 0.625 *.442 0.312 0.125 1.440 1.320 0.820 0.950 1.410 14,500
25.40 15.88 11.23 7.92 3.18 36.58 33.53 20.83 24.13 2.10 6,577
105 1.250 0.750 *.532 0.375 0.156 1.730 1.610 1.025 1.188 2.080 24,000
31.75 19.05 13.51 9.53 3.96 43.94 40.89 26.04 30.18 3.10 10,886
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

* Chain is rollerless. Dimension shown is bushing diameter.

** Maximum value listed.
Note: 55S, 65S assembled with medium carbon through-hardened pins
Conditions
Terms and

16 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Hoist and Lift Chain
Terminal Fittings
Diamond Chain does not provide terminal fittings. We recommend that fittings be made of through-hardened steel,

Difference
Diamond
heat treated to HRC 40-45. They should be machined accurately to ensure proper mating with chain link plates and to
provide uniform loading across the width of the chain. Chains should always be attached to the terminal fittings using
a press-fit style connecting link. Terminal fittings should be inspected regularly and the above conditions maintained.
Worn, damaged or corroded chains and/or terminal fittings can lead to chain failure which may result in either personal
injury or property damage.

Selection
Guide
Carbon
Steel
PIN DIAMETER

& Moisture
Corrosion

Resistant
PITCH
A
HOLE DIAMETER

TERMINAL TERMINAL

Maintenance
FITTING FITTING
W

Reduced
Diamond Pitch Block Pin Hole A (max)
Number Width (W) Diameter Diameter
in in in in in
mm mm mm mm mm

Attachments
60H or HS 0.750 0.764 0.234 0.237 0.375
19.05 19.41 7.11 6.02 9.53
80H or HS 1.000 0.955 0.312 0.315 0.500
25.40 24.26 8.43 8.00 12.70
100H or HS 1.250 1.141 0.375 0.378 0.625
31.75 28.98 11.23 9.60 15.88

Application
120H or HS 1.500 1.458 0.437 0.440 0.750

Specific
38.10 37.03 13.51 11.18 19.05
140H or HS 1.750 1.523 0.500 0.503 0.875
44.45 38.68 15.75 12.78 22.23
160H or HS 2.000 1.838 0.562 0.565 1.000
50.80 46.69 8.43 14.35 25.40
180H or HS 2.250 2.058 0.687 0.690 1.125

Horsepower
57.15 52.27 11.23 17.53 28.58

Tables
200H or HS 2.500 2.285 0.781 0.784 1.250
63.50 58.04 13.51 19.91 31.75
625 0.625 0.542 0.200 0.203 0.312
15.88 13.77 15.75 5.16 7.92
750 0.750 0.696 0.234 0.237 0.375

Components
19.05 17.68 8.43 6.02 9.53

Chain
55S 0.625 0.542 0.200 0.203 0.312
15.88 13.77 11.23 5.16 7.92
65S 0.750 0.696 0.234 0.237 0.375
19.05 17.68 13.51 6.02 9.53
85 1.000 0.886 0.312 0.315 0.500
Troubleshooting

25.40 22.50 15.75 8.00 12.70

105 1.250 1.076 0.375 0.378 0.625
Tools,

31.75 27.33 8.43 9.60 15.88

Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 17

 Diamond
Chain

ASME/ANSI Double Pitch Power Transmission Series Chain

#2040-2080 Pitch
Double Pitch Power Transmission Roller Chain utilizes figure-eight style link plates with a pitch twice that of the
Difference
Diamond

standard series chains. Typical uses for these chains include light load drives such as those in agricultural applications.

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
Selection
Guide

ROLLER DIAMETER PITCH

LINK PLATE
HEIGHT (H)
Carbon
Steel

ASME/ Pitch Roller Width Roller Pin Link Plate C R H* Avg. Weight Avg. Tensile Horsepower
ANSI Diameter Diameter Thickness Strength† Table
Number
in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm kg/m kg
& Moisture
Corrosion
Resistant

2040 1.000 0.313 0.312 0.156 0.060 0.760 0.680 0.475 0.280 3,700 76
25.40 7.94 7.92 3.96 1.52 19.30 17.27 12.07 0.42 1,678
2050 1.250 0.375 0.400 0.200 0.080 0.920 0.840 0.594 0.520 6,100 77
31.75 9.53 10.16 5.08 2.03 23.37 21.34 15.09 0.77 2,767
2060 1.500 0.500 0.469 0.234 0.094 1.110 1.050 0.712 0.720 8,500 78
38.10 12.70 7.11 5.94 2.39 28.19 26.67 18.08 1.07 3,856
Maintenance

2080 2.000 0.625 0.625 0.312 0.125 1.440 1.320 0.950 1.130 14,500 79
Reduced

50.80 15.88 8.43 7.92 3.18 36.58 33.53 24.13 1.68 6,577
Attachments
Application
Specific
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

* Nominal value shown.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

18 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
ASME/ANSI Double Pitch Conveyor Series Chain
C2040-C2160H Pitch
Double Pitch Conveyor Roller Chain utilize oval-contour link plates and can be produced with either standard

Difference
Diamond
or oversized rollers. Typical uses for these chains are conveyor applications where loads are low and speeds
are moderate. These chains can be produced with a variety of attachments. Optional oversized rollers (C2xx2
nomenclature) extend above and below the link plates produce a rolling rather than sliding action, thus minimizing
friction and power requirements.

Selection
Standard Roller (C2xx0) Oversized Roller (C2xx2)

Guide
CHAIN WIDTH, ROLLER CHAIN WIDTH, CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C) RIVETED (R) WIDTH COTTERED (C)

ROLLER DIAMETER PITCH ROLLER DIAMETER PITCH

Carbon
LINK PLATE LINK PLATE

Steel
HEIGHT (H) HEIGHT (H)

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R H* Avg. Weight Avg. Tensile
Number Diameter Diameter Thickness Strength†

& Moisture
Corrosion

Resistant
in in in in in in in in lbs/ft lbs
mm mm mm mm mm mm mm mm kg/m kg
Standard Roller
C2040 1.000 0.333 0.312 0.156 0.060 0.760 0.680 0.475 0.340 3,125
25.40 8.47 7.92 3.96 1.52 19.30 17.27 12.07 0.51 1,417
C2050 1.250 0.375 0.400 0.200 0.080 0.920 0.840 0.594 0.580 4,880

Maintenance
Reduced
31.75 9.53 10.16 5.08 2.03 23.37 21.34 15.09 0.86 2,214
C2060H 1.500 0.500 0.469 0.234 0.125 1.250 1.180 0.712 1.050 7,030
38.10 12.70 7.11 5.94 3.18 31.75 29.97 18.08 1.56 3,189
C2080H 2.000 0.625 0.625 0.312 0.156 1.570 1.450 0.950 1.400 12,500
50.80 15.88 8.43 7.92 3.96 39.88 36.83 24.13 2.08 5,670
C2100H 2.500 0.750 0.750 0.375 0.187 1.860 1.740 1.187 2.480 24,000

Attachments
63.50 19.05 19.05 9.53 4.75 47.24 44.20 30.15 3.69 10,886
C2120H 3.000 1.000 0.875 0.437 0.219 2.270 2.130 1.425 3.600 34,000
76.20 25.40 22.23 11.10 5.56 57.66 54.10 36.20 5.36 15,422
C2160H 4.000 1.071 1.125 0.562 0.281 2.860 2.680 1.900 6.180 58,000
101.60 27.21 7.11 14.27 7.14 72.64 68.07 48.26 9.20 26,308
Oversized Roller
C2042 1.000 0.333 0.625 0.156 0.060 0.760 0.680 0.475 0.500 3,125

Application
25.40 8.47 15.88 3.96 1.52 19.30 17.27 12.07 0.74 1,417

Specific
C2052 1.250 0.375 0.750 0.200 0.080 0.920 0.840 0.594 0.810 4,880
31.75 9.53 19.05 5.08 2.03 23.37 21.34 15.09 1.21 2,214
C2062H 1.500 0.500 0.875 0.234 0.125 1.250 1.180 0.712 1.420 7,030
38.10 12.70 7.11 5.94 3.18 31.75 29.97 18.08 2.11 3,189
C2082H 2.000 0.625 1.125 0.312 0.156 1.570 1.450 0.950 2.130 12,500

Horsepower
50.80 15.88 8.43 7.92 3.96 39.88 36.83 24.13 3.17 5,670

Tables
C2102H 2.500 0.750 1.562 0.375 0.187 1.860 1.740 1.187 3.510 24,000
63.50 19.05 39.67 9.53 4.75 47.24 44.20 30.15 5.22 10,886
C2122H 3.000 1.000 1.750 0.437 0.219 2.270 2.130 1.425 5.480 34,000
76.20 25.40 44.45 11.10 5.56 57.66 54.10 36.20 8.16 15,422
C2162H 4.000 1.071 2.250 0.562 0.281 2.860 2.680 1.900 9.340 58,000
101.60 27.21 7.11 14.27 7.14 72.64 68.07 48.26 13.90 26,308

Components
Chain
Troubleshooting
Tools,
Information
Ordering

* Nominal value shown.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 19

 Diamond
Chain

Non-Standard Series Chain

Diamond Chain Company has been in existence longer than the ASME/ANSI standards for roller chain. While many of
the early chains produced by Diamond were incorporated into the new ASME/ANSI standards, some ultimately were
Difference
Diamond

not. Diamond Chain Company recognizes that a considerable amount of industrial equipment still utilizes these unique
chains, and continues to support these non-standard models below.
Single Strand Multiple Strand (-X suffix)
Selection

CHAIN WIDTH, ROLLER CHAIN WIDTH,

Guide

RIVETED (R) WIDTH COTTERED (C)

CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)
Carbon
Steel

Diamond Other ID Pitch Roller Width Roller Pin Link Plate C R K Avg. Weight Avg. Tensile
Number Diameter Diameter Thickness Strength†
in in in in in in in in lbs/ft lbs
mm mm mm mm mm mm mm mm kg/m kg
& Moisture
Corrosion
Resistant

867 BS #7 0.500 0.313 0.335 0.174 0.060 0.730 0.680 - 0.430 4,200
12.70 7.94 7.11 4.42 1.52 18.54 17.27 - 0.64 1,905
148 x 1/4 BS #10 0.625 0.250 0.400 0.200 0.080 0.730 0.670 - 0.590 6,600
15.88 6.35 8.43 5.08 2.03 18.54 17.02 - 0.88 2,994
148 x 5/16 0.625 0.188 0.400 0.200 0.080 0.860 0.740 - 0.640 6,600
Maintenance

15.88 4.76 11.23 5.08 2.03 21.84 18.80 - 0.95 2,994

Reduced

433 x 3/8 0.750 0.375 0.469 0.234 0.094 0.980 0.910 - 0.910 8,500
19.05 9.53 13.51 5.94 2.39 24.89 23.11 - 1.35 3,856
435 x 3/8 1.000 0.375 0.562 0.281 0.125 1.140 1.050 - 1.110 9,000
25.40 0.50 15.75 7.14 3.18 28.96 26.67 - 1.65 4,082
435 x 1/2 1.000 0.500 0.562 0.281 0.125 1.270 1.180 - 1.210 9,000
25.40 12.70 8.43 7.14 3.18 32.26 29.97 - 1.80 4,082
Attachments

472 1.500 0.750 0.875 0.437 0.187 1.860 1.720 - 3.400 34,000
38.10 19.05 11.23 11.10 4.75 47.24 43.69 - 5.06 15,422
472-2 1.500 0.750 0.875 0.437 0.187 3.450 3.300 1.550 6.760 68,000
38.10 19.05 13.51 11.10 4.75 87.63 83.82 39.37 10.06 30,844
472-3 1.500 0.750 0.875 0.437 0.187 5.000 4.850 1.550 10.080 102,000
38.10 19.05 15.75 11.10 4.75 127.00 123.19 39.37 15.00 46,266
472-4 1.500 0.750 0.875 0.437 0.187 6.550 6.410 1.550 13.400 136,000
Application
Specific

38.10 19.05 13.51 11.10 4.75 166.37 162.81 39.37 19.94 61,689
264 64S 2.500 1.500 1.562 0.875 0.375 3.710 3.390 - 13.680 148,500
63.50 38.10 15.75 22.23 9.53 94.23 86.11 - 20.36 67,358
264-3 64S-3 0.400 1.500 1.562 0.875 0.375 9.880 9.560 3.083 40.920 445,500
10.16 38.10 8.43 22.23 9.53 250.95 242.82 78.31 60.90 202,075
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

20 1-800 US CHAIN (872-4246) | diamondchain.com

 diamondchain.com
|
1-800 US CHAIN (872-4246)
This page intentionally left blank

21
Terms and Ordering Tools, Chain Horsepower Application Attachments Reduced Corrosion Carbon Selection Diamond Diamond
Conditions Information Troubleshooting Components Tables Specific Maintenance & Moisture Steel Guide Difference Chain
Resistant
 Diamond
Moisture and
Chain

Corrosion
Resistant
Difference
Diamond

Chain
Selection
Guide

AP Series
Carbon

Stainless Steel
Steel

Roller Chain
& Moisture
Corrosion
Resistant
Maintenance
Reduced

Multiple options are available for Moisture and Corrosion Resistant Chain. Proper selection depends on the
requirements of the specific application.
Attachments

Moisture resistant chain: Recommended for applications with high humidity, saltwater or water exposure/
wash down. Because water is the principle element of concern, a plated carbon steel chain is the
recommended option as it provides superior strength and wear life, as well as lower cost, when compared
Application

to stainless steel. Two plating options are available:

Specific

Nickel Plating Provides good protection against water or humidity. Utilizes a nickel coating applied to
each part prior to assembly.
Diamond ACE Provides superior protection against water, salt water and humidity. May offer limited resistance
Horsepower

Plating to caustic chemicals or acids if application does not allow stainless steel. Utilizes a proprietary
Tables

ACE (Anti Corrosion Exterior) plating applied to each part prior to assembly.

Corrosion resistant chain: Recommended for applications involving exposure to chemicals or caustic
Components

acids. Stainless steel is the recommended base material in these applications due to its resistance to
Chain

corrosion; however, because stainless steel is softer than carbon steel the strength and wear performance
will be reduced. Multiple stainless steel chain options are available:
Troubleshooting

AP Series Diamond Chain's standard stainless steel product, the AP series provides the best balance between
Tools,

wear performance and corrosion resistance. Well suited for food processing, AP Series chain uses 300
series (austenic) stainless components with precipitation hardened stainless steel pins. Provided unless
otherwise specified.
300 Series Designed specifically for applications requiring exceptional corrosion resistance, low magnetic
permeability or that that the chain be “non sparking.” Utilizes only 300 series stainless steel components
Information

and pins; wear performance is the lowest of the stainless steel material options.
Ordering

400 Series 400 series is an application specific chain material, typically used only when there is exposure
to select chemicals. Reference the corrosion resistance tables in this section for applicability.
Conditions
Terms and

22 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Moisture Resistant Chain
Nickel Plated
The typical plating used in the roller chain industry, a nickel plating is applied to each part prior to assembly which

Difference
Diamond
establishes a corrosion resistant barrier to prevent rust from occurring. However, product can rust if the nickel barrier is
scratched or damaged. Offers good protection against water or humidity, poor protection from salt water.
Please note that nickel plating is an available option on all carbon steel chains; specify by adding “NP” to the part
number (e.g. 60NP). The list below is a reference that details the most popular nickel plated chain part numbers.

Selection
Standard Chain Conveyor Chain (C20x0)

Guide
CHAIN WIDTH, ROLLER CHAIN WIDTH, CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C) RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, ROLLER DIAMETER PITCH CENTER TO
RIVETED (R) CENTER (K)

Carbon
Steel
ROLLER LINK
ROLLER LINK PIN LINK HEIGHT (H)
HEIGHT (H) HEIGHT (E)

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R E** H** Avg. Weight Avg. Tensile Horsepower

& Moisture
Corrosion

Resistant
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm kg/m kg
25NP 0.250 0.125 *.130 0.090 0.030 0.370 0.340 0.205 0.238 0.085 875 53
6.35 3.18 3.30 2.29 0.76 9.40 8.64 5.21 6.05 0.13 397
35NP 0.375 0.188 *.200 0.141 0.050 0.560 0.500 0.308 0.356 0.220 2,100 54

Maintenance
9.53 4.76 5.08 3.58 1.27 14.22 12.70 7.82 9.04 0.33 953

Reduced
40NP 0.500 0.313 0.301 0.156 0.060 0.720 0.670 0.410 0.475 0.420 4,000 55
12.70 7.94 7.65 3.96 1.52 18.29 17.02 10.41 12.07 0.63 1,814
50NP 0.625 0.375 0.400 0.200 0.080 0.890 0.830 0.512 0.594 0.680 6,600 57
15.88 9.53 10.16 5.08 2.03 22.61 21.08 13.00 15.09 1.01 2,994
60NP 0.750 0.500 0.469 0.234 0.094 1.110 1.040 0.615 0.713 0.970 8,500 58
19.05 12.70 11.91 5.94 2.39 28.19 26.42 15.62 18.11 1.44 3,856

Attachments
80NP 1.000 0.625 0.625 0.312 0.125 1.440 1.320 0.820 0.950 1.700 14,500 59
25.40 15.88 15.88 7.92 3.18 36.58 33.53 20.83 24.13 2.53 6,577
100NP 1.250 0.750 0.750 0.375 0.156 1.730 1.610 1.025 1.188 2.500 24,000 60
31.75 19.05 19.05 9.53 3.96 43.94 40.89 26.04 30.18 3.72 10,886
120NP 1.500 1.000 0.875 0.437 0.187 2.140 2.000 1.230 1.425 3.700 34,000 61
38.10 25.40 22.23 11.10 4.75 54.36 50.80 31.24 36.20 5.51 15,422

Application
C2040NP 1.000 0.313 0.312 0.156 0.060 0.760 0.680 - 0.475 0.320 3,700 n/a

Specific
25.40 7.94 7.92 3.96 1.52 19.30 17.27 - 12.07 0.48 1,678
C2050NP 1.250 0.375 0.400 0.200 0.080 0.920 0.840 - 0.594 0.550 6,100 n/a
31.75 9.53 10.16 5.08 2.03 23.37 21.34 - 15.09 0.82 2,767
C2060HNP 1.500 0.500 0.469 0.234 0.125 1.250 1.180 - 0.712 0.970 8,500 n/a
38.10 12.70 11.91 5.94 3.18 31.75 29.97 - 18.08 1.44 3,856

Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

* Chain is rollerless. Dimension shown is bushing diameter.

** Maximum value listed.
† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 23

 Diamond
Chain

Moisture Resistant Chain

Diamond ACE
Diamond ACE (Anti-Corrosion Exterior) incorporates an electrically bonded specially formulated zinc-nickel alloy and
Difference
Diamond

non-hexavalent chromium coating that is applied to component parts prior to assembly. The plating serves as a
protective barrier that oxidizes before the carbon steel base chain, thus preserving the chain’s physical and structural
integrity. As a result, the chain experiences superior protection over nickel plating - even if scratched or damaged.
Excellent defense against water, salt water, and humidity. May offer limited resistance to caustic chemicals or acids if
application does not allow stainless steel.
Selection
Guide

Please note that ACE plating is an available option on all carbon steel chains; specify by adding "ACE" to the part
number (e.g. 60ACE). The table below is a reference that contains the most popular ACE plated chain part numbers.

Standard Chain Conveyor Chain (C20x0) Oversized Roller Conveyor Chain (C20x2)
Carbon
Steel

CHAIN WIDTH, ROLLER CHAIN WIDTH, CHAIN WIDTH, ROLLER CHAIN WIDTH, CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C) RIVETED (R) WIDTH RIVETED (R) WIDTH COTTERED (C)
COTTERED (C)
CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, ROLLER DIAMETER PITCH ROLLER DIAMETER PITCH
RIVETED (R) CENTER TO
CENTER (K)
LINK PLATE LINK PLATE
ROLLER LINK PIN LINK HEIGHT (H) HEIGHT (H)
HEIGHT (H) HEIGHT (E)
& Moisture
Corrosion
Resistant

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm kg/m kg
Maintenance
Reduced

40ACE 0.500 0.313 0.312 0.156 0.060 0.720 0.670 0.410 0.475 0.420 4,000 55
12.70 7.94 7.92 3.96 1.52 18.29 17.02 10.41 12.07 0.63 1,814
50ACE 0.625 0.375 0.400 0.200 0.080 0.890 0.830 0.512 0.594 0.680 6,600 57
15.88 9.53 10.16 5.08 2.03 22.61 21.08 13.00 15.09 1.01 2,994
60ACE 0.750 0.500 0.469 0.234 0.094 1.110 1.040 0.615 0.713 0.970 8,500 58
19.05 12.70 11.91 5.94 2.39 28.19 26.42 15.62 18.11 1.44 3,856
Attachments

80ACE 1.000 0.625 0.625 0.312 0.125 1.440 1.320 0.820 0.950 1.700 14,500 59
25.40 15.88 15.88 7.92 3.18 36.58 33.53 20.83 24.13 2.53 6,577
C2040ACE 1.000 0.313 0.312 0.156 0.060 0.760 0.680 - 0.475 0.340 3,700 n/a
25.40 7.94 7.92 3.96 1.52 19.30 17.27 - 12.07 0.51 1,678
C2042ACE 1.000 0.313 0.625 0.156 0.060 0.760 0.680 - 0.475 0.340 3,700 n/a
25.40 7.94 15.88 3.96 1.52 19.30 17.27 - 12.07 0.51 1,678
C2050ACE 1.250 0.375 0.400 0.200 0.080 0.920 0.840 - 0.594 0.580 6,100 n/a
Application

31.75 9.53 10.16 5.08 2.03 23.37 21.34 - 15.09 0.86 2,767
Specific

C2052ACE 1.250 0.375 0.750 0.200 0.080 0.920 0.840 - 0.594 0.580 6,100 n/a
31.75 9.53 19.05 5.08 2.03 23.37 21.34 - 15.09 0.86 2,767
C2060HACE 1.500 0.500 0.469 0.234 0.125 1.250 1.180 - 0.712 1.050 8,500 n/a
38.10 12.70 11.91 5.94 3.18 31.75 29.97 - 18.08 1.56 3,856
C2062HACE 1.500 0.500 0.875 0.234 0.125 1.250 1.180 - 0.712 1.050 8,500 n/a
Horsepower

38.10 12.70 22.23 5.94 3.18 31.75 29.97 - 18.08 1.56 3,856
Tables

C2080HACE 2.000 0.625 0.625 0.312 0.156 1.570 1.450 - 0.950 1.400 14,500 n/a
50.80 15.88 15.88 7.92 3.96 39.88 36.83 - 24.13 2.08 6,577
C2082HACE 2.000 0.625 1.125 0.312 0.156 1.570 1.450 - 0.950 1.400 14,500 n/a
50.80 15.88 28.58 7.92 3.96 39.88 36.83 - 24.13 2.08 6,577
Components
Chain
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

24 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Stainless Steel Chain
AP, 300, and 400 Series
Stainless steel, because of its natural corrosion resistance, is recommended for applications involving exposure to

Difference
Diamond
chemicals or caustic acids. However, stainless steel is softer than carbon steel so wear, fatigue and tensile performance
is reduced. Three different stainless steel materials are available; please see the section introduction and the corrosion
tables at the back of the section for assistance in selecting the appropriate material. AP series stainless is the most
common due to best combination of corrosion resistance and wear performance, followed by 300 series. 400 series is
typically used only in special applications. AP series is the default material for stainless steel chains; contact customer

Selection
service if 300 or 400 series is required.

Guide
AP Series: all components (except pins) 300 series (austenitic) stainless steel. Pins are precipitation hardened.
300 Series: all components (including pins) 300 series (austenitic) stainless steel.
400 Series: link plates constructed from 400 series stainless steel; pins, bushings and rollers 300 series stainless steel

Carbon
Steel
Standard Chain Multiple Strand Chain (-X suffix)

& Moisture
CHAIN WIDTH, ROLLER

Corrosion
CHAIN WIDTH,

Resistant
RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)

Maintenance
Reduced
ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile
Number Diameter Diameter Thickness Strength†
in in in in in in in in in in lbs/ft lbs
mm mm mm mm mm mm mm mm mm mm kg/m kg

Attachments
47SS 0.148 0.072 *.090 0.062 0.015 0.250 0.220 0.138 0.138 0.035 180
3.75 1.83 2.29 1.57 0.38 6.35 5.59 - 3.51 3.51 0.05 82
25SS 0.250 0.125 *.130 0.090 0.030 0.370 0.340 0.205 0.238 0.084 700
6.35 3.18 3.30 2.29 0.76 9.40 8.64 - 5.21 6.05 0.13 318
25-2SS 0.250 0.125 *.130 0.090 0.030 0.630 0.590 0.252 0.205 0.238 0.163 1,400
6.35 3.18 3.30 2.29 0.76 16.00 14.99 6.40 5.21 6.05 0.24 635

Application
35SS 0.375 0.188 *.200 0.141 0.050 0.560 0.500 0.308 0.356 0.210 1,700

Specific
9.53 4.76 5.08 3.58 1.27 14.22 12.70 - 7.82 9.04 0.31 771
40SS 0.500 0.313 0.312 0.156 0.060 0.720 0.670 0.410 0.475 0.410 3,000
12.70 7.94 7.92 3.96 1.52 18.29 17.02 - 10.41 12.07 0.61 1,361
40-2SS 0.500 0.313 0.312 0.156 0.060 1.290 1.240 0.566 0.410 0.475 0.800 6,000
12.70 7.94 7.92 3.96 1.52 32.77 31.50 - 10.41 12.07 1.19 2,722
41SS 0.500 0.250 0.306 0.141 0.050 0.650 0.570 0.310 0.383 0.280 1,700

Horsepower
12.70 6.35 7.77 3.58 1.27 16.51 14.48 - 7.87 9.73 0.42 771

Tables
50SS 0.625 0.375 0.400 0.200 0.080 0.890 0.830 0.512 0.594 0.680 4,700
15.88 9.53 10.16 5.08 2.03 22.61 21.08 - 13.00 15.09 1.01 2,132
50-2SS 0.625 0.375 0.400 0.200 0.080 1.600 1.550 0.713 0.521 0.594 1.320 9,400
15.88 9.53 10.16 5.08 2.03 40.64 39.37 - 13.00 15.09 1.96 4,264
60SS 0.750 0.500 0.469 0.234 0.094 1.110 1.040 .0615 0.713 1.000 6,750

Components
19.05 12.70 11.91 5.94 2.39 28.19 26.42 - 15.52 18.11 1.49 3,062
60-2SS 0.750 0.500 0.469 0.234 0.094 2.010 1.940 0.897 .0615 0.713 1.950 13,500
19.05 12.70 11.91 5.94 2.39 51.05 49.28 - 15.52 18.11 2.90 6,123 Chain
80SS 1.000 0.625 0.625 0.312 0.125 1.440 1.320 0.820 0.950 1.690 12,000
25.40 15.88 15.88 7.92 3.18 36.58 33.53 0.00 20.83 24.13 2.51 5,443
Troubleshooting
Tools,
Information
Ordering

* Chain is rollerless. Dimension shown is bushing diameter.

** Maximum value listed.
† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 25

 Diamond
Chain

Stainless Steel Chain (continued)

Conveyor Series Chain
Standard Roller Conveyor Series (C2xx0) Oversized Roller Conveyor Series (C2xx2)
Difference
Diamond

CHAIN WIDTH, ROLLER CHAIN WIDTH, CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C) RIVETED (R) WIDTH COTTERED (C)

ROLLER DIAMETER PITCH ROLLER DIAMETER PITCH

LINK PLATE
Selection

HEIGHT (H) LINK PLATE

Guide

HEIGHT (H)

ASME/ANSI Pitch Roller Width Roller Diameter Pin Link Plate C R H* Avg. Weight Avg. Tensile
Number Diameter Thickness Strength†
Carbon

in in in in in in in in lbs/ft lbs
Steel

mm mm mm mm mm mm mm mm kg/m kg
Standard Rollers
C2040SS 1.000 0.313 0.312 0.156 0.060 0.760 0.680 0.475 0.340 3,000
25.40 7.94 7.92 3.96 1.52 19.30 17.27 12.07 0.51 1,361
& Moisture

C2050SS 1.250 0.375 0.400 0.200 0.080 0.920 0.840 0.594 0.560 4,700
Corrosion
Resistant

31.75 9.53 10.16 5.08 2.03 23.37 21.34 15.09 0.83 2,132
C2060SS 1.500 0.500 0.469 0.234 0.094 1.110 1.050 0.712 0.810 6,750
38.10 12.70 11.91 5.94 2.39 28.19 26.67 18.08 1.21 3,062
C2080SS 2.000 0.625 0.625 0.312 0.125 1.440 1.320 0.950 1.400 12,000
50.80 15.88 15.88 7.92 3.18 36.58 33.53 24.13 2.08 5,443
Oversized Roller
Maintenance
Reduced

C2042SS 1.000 0.313 0.625 0.156 0.060 0.760 0.680 0.475 0.550 3,000
25.40 7.94 15.88 3.96 1.52 19.30 17.27 12.07 0.82 1,361
C2052SS 1.250 0.375 0.750 0.200 0.080 0.920 0.840 0.594 0.860 4,700
31.75 9.53 19.05 5.08 2.03 23.37 21.34 15.09 1.28 2,132
C2062SS 1.500 0.500 0.875 0.234 0.094 1.110 1.050 0.712 1.270 6,750
38.10 12.70 22.23 5.94 2.39 28.19 26.67 18.08 1.89 3,062
Attachments

C2082SS 2.000 0.625 1.125 0.312 0.125 1.440 1.320 0.950 2.060 12,000
50.80 15.88 28.58 7.92 3.18 36.58 33.53 24.13 3.07 5,443
Application
Specific
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

* Nominal value listed

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

26 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Corrosion Resistance Tables
Stainless Steel Roller Chain
4=Total Resistance 5=Satisfactory Resistance 9=Partial Resistance 0=Not Recommended

Difference
Diamond
AP Series 300 Series 400 Series AP Series 300 Series 400 Series
Stainless Stainless Stainless Stainless Stainless Stainless

Acetic Acid Bichloride of Mercury

Dilute 70°F 4 4 9 less than 0.1% 4 4 -

Selection
Guide
Dilute Boiling 4 9 9 greater than 0.7%-cold 5 5 -
Conc. 70°F 4 4 9 greater than 0.7%-hot 9 9 -
Conc. Boiling 9 5 9 Calcium Hypochloride 9 9 9
Acetic Anhydride 4 4 5 Blood (Meat Juices) 4 4 4
Acetic Vapors 4 9 - Blue Vitriol (Copper Sulfate)

Carbon
Steel
Acetone 4 4 5 5%-70°F 4 4 4
Alcohol Saturated Solution-Boiling 4 4 -
(Methyl, Ethyl, Propyl, and Butyl) 4 4 4
Borax 4 4 4
Aluminum Acetate 4 4 -
Boric Acid 4 4 4

& Moisture
Corrosion
Aluminum Chloride

Resistant
9 9 9
Bromine 0 0 0
Aluminum Sulfate
Buttermilk 4 4 4
70°F 5 4 -
Butyric Acid 5 4 4
Boiling 5 5 -
Calcium Chloride (Alkaline)
Aluminum Potassium
Boiling 4 4 -

Maintenance
70°F 4 4 9

Reduced
Boiling, 300 lbs. Pressure 0 9 -
Boiling 5 5 -
Calcium Carbonate 4 4 4
Ammonia
Ammonium Hydroxide
Calcium Oxychloride 9 9 -
4 4 4
Ammonium Bicarbonate 4 4 4
Calcium Sulfate 4 4 -

Attachments
Ammonium Chloride Carbolic Acid 4 4 4
70°F 4 4 5 Carbon Disulfide 4 4 4
Boiling 0 5 - Carbon Monoxide 4 4 4
Ammonium Nitrate 4 4 4 Carbon Tetrachloride (Pure) 4 4 4
Ammonium Oxalate 4 4 4 Carnallite (Potassium,
Magnesium Chloride) 5 5 -

Application
Ammonium Persulfate 4 4 -

Specific
Caustic Lime, Potash or Soda
Ammonium Sulfate
(Calcium, Potassium, or Hydroxide), Lye
70°F 4 4 5
70°F 4 4 4
plus 0.5% H2SO4 4 4 -
Boiling 5 5 5
plus 5.0% H2SO4 4 9 -

Horsepower
Ammonium Stannichloride Cellulose 4 4 -

Tables
70°F 5 5 - Chlorine Gas

120°F - Dry 0 9 9
0 0
Aniline 4 4 Moist 0 0 0
Aniline Hydrochloride 9 9 - Chlorinated Water 0 9 4

Components
Antimony, Molten, 1100°F 0 0 0 Chlorobenzine 4 4 -
Baking Soda Chloroform 4 4 - Chain
Sodium Bicarbonate 4 4 4 Chromic Acid

Barium Carbonate 4 4 4 70°F 4 5 9

Troubleshooting

Barium Chloride Boiling 9 9 -

70°F 4 4 5 with SO3, Boiling 0 0 0
Tools,

Hot 5 5 - Chrome Aluminum 4 4 -

Barium Nitrate 4 4 - Boiling 0 0 -
Barium Sulfate 4 4 - Citric Acid-10%
Beer 4 4 4 70°F 4 4 4
Information
Ordering

Beet Juice 4 4 4 Boiling 9 9 0

Benzene (Benzol) 4 4 Cola Syrup 4 4 5
Benzine TR 4 4 4 Copperas (Ferrous Sulfate) 5 5 5
Benzoic Acid 4 4 4 Copper Acetate 4 4 -
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 27

 Diamond
Chain

Corrosion Resistance Tables

Stainless Steel Roller Chain
Difference
Diamond

AP Series 300 Series 400 Series AP Series 300 Series 400 Series
Stainless Stainless Stainless Stainless Stainless Stainless

Copper Carbonate 4 4 4 Lactic Acid

Copper Chloride 70°F 5 4 5
70°F 9 9 9 150°F 9 9 9
Selection
Guide

Boiling 0 0 0 Lard 4 4 -
Copper Cyanide 4 4 4 Lead, Molten, 1200°F 5 5 9
Copper Nitrate 4 4 4 Linseed Oil 5 4 5
Copper Sulfate 4 4 4 Lye (Sodium or Potassium Hydroxide)
Creosote 4 4 4 70°F 4 4 4
Carbon

-
Steel

Cyanogen Gas 4 4 Boiling 5 5 5

Dichloro-ethane (Ethylidene Lysol 4 4 9
Chloride, Ethylene 4 4 -
Magnesium Chloride
Chloride, Dutch Liquor)
70°F 5 5 5
Dyewood Liquor 4 4 -
Hot 9 9 9
& Moisture
Corrosion
Resistant

Epsom Salts (Magnesium Sulfate) 4 4 5

Magnesium Oxychloride 9 9 -
Ether 4 4 4
Magnesium Sulfate (Epsom Salt) 4 4 5
Ferric Hydroxide 4 4 4
Malic Acid 4 4 5
Ferric Chloride 9 9 9
Manganese Chloride 4 4 -
Ferric Nitrate 4 4 4
-
Maintenance

Marsh Gas (Illuminating Gas) 4 4

Ferric or Ferrous Sulfate 5 5 5
Reduced

Mash, Hot 4 4 -
Formaldehyde (Formalin) 4 4 4
Mayonnaise 4 5 9
Formic Acid 9 5 9
Mercury 4 4 -
Fruit Juices 5 4 9
Methyl Aldehyde 4 4 -
Fuel Oil 4 4 -
Milk-Sweet or Sour 4 4 4
Attachments

Fuel Oil Containing Sulfuric Acid 9 9 -

Mine Water, Acid 4 4 4
Gallic Acid 4 4 4
Mixed Acids
Gasoline 4 4 4
a. 50% H2SO4 0.5 HN03
Glauber’s Salt (Sodium Sulfate) 4 4 4
70°F 5 5 5
Glue acidified 5 5 -
Boiling 9 9 9
Glycerine
Application

4 4 4
Specific

b. 75% H2SO4 0.25 HN03

Grape Juice 5 4 4
70°F 5 5 5
Gypsum (Calcium Sulfate) 4 4 -
Boiling 9 9 9
Hydrogen Peroxide 5 5 5
c. 5% H2SO4 0.05 HNO3
Hydrobromic Acid 9 9 9
80% H20
Horsepower

Hydrochloric Acid (Muriatic)

70°F 5 5 5
Tables

70°F 0 9 9
Boiling 5 5 -
Boiling 0 0 0
d. Chromic and Sulfuric 9 9 -
Fumes-70°F 0 9 9
Molasses 4 4 -
Hydrocyanic Acid (Prussic Acid) 4 4 9
Mustard (Prepared) 4 4 0
-
Components

Hydrofluoric Acid Fumes 9 9

Naphtha, Pure or Crude 4 4 4
-
Chain

Hydrafluosilic Acid 9 9
Nickel Chloride 5 5 -
Hydrofluosilic Acid Fumes 0 0 0
Nickel Sulfate 4 4 -
Hyposulfite of Soda
(Hypo, Sodium Thiosulfate)
4 4 5 Nitre (Potassium Nitrate) 4 4 4
Nitric Acid
Troubleshooting

Hydrogen Sulfide
Dry 4 4 - 70°F 5 4 4
Tools,

Moist, H2SO, Present 0 9 - Concentrated, Boiling 5 5 0

Inks Fuming, Concentrated, Boiling 9 9 0
Alkaline 4 4 - Nitrous Acid 5 4 5
Acid 5 5 - Oleic Acid 4 5 5
Information

Iodine Oils, Mineral or Vegetable

Ordering

Dry 0 4 - Refined 4 4 4
Moist 0 0 0 Crude 5 5 5
lodotorm 4 4 - Oxalic Acid 9 9 5
Kerosene 4 4 4 Paraffin 4 4 4
Phenol (Carbolic Acid) 4 4 4
Conditions

Ketchup
Terms and

4 5 5

28 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Corrosion Resistance Tables
Stainless Steel Roller Chain
4=Total Resistance 5=Satisfactory Resistance 9=Partial Resistance 0=Not Recommended

Difference
Diamond
AP Series 300 Series 400 Series AP Series 300 Series 400 Series
Stainless Stainless Stainless Stainless Stainless Stainless

Petroleum 4 4 4 Sodium Hyposulfite (Hypo) 4 4 5

Petroleum Ether 4 4 4 Sodium Nitrate

Selection
4 4 4

Guide
Phosphoric Acid, Technical 4 5 9 (Chili Saltpeter, Soda Nitre)
Boiling Crude 0 0 0 Molten, 600°F 5 5 -
Picric Acid 4 4 4 Sodium Peroxide 4 4 -
Plaster of Paris (Sulfate of Lime, Gypsum) 4 4 - Sodium Salicylate 4 4 4
Potash (Potassium Carbonate) 4 4 4 Sodium Sulfate (Glauber’s Salt) 4 4 4

Carbon
Potassium Bitartrate 5 5 -

Steel
Sodium Sulfide 5 5 5
Potassium Bichromate 4 4 4
Sodium Thiosulfate (Hypo) 4 4 5
Potassium Bromide 5 5 9
Stannic Chloride
Potassium Chlorate 4 4 4 (Tetrachloride of Tin)
0 0 0
Potassium Chloride 5 5 5

& Moisture
Stannous Chloride 9 9 0

Corrosion

Resistant
Potassium Cyanide 4 4 4
Starch 4 4 -
Potassium Hydroxide
Strontium Hydroxide 4 4 -
Boiling 5 5 5
Molten, 650°F 0 0 0
Strontium Nitrate 4 4 -
Potassium Hypochlorite 5 5 - Sugar or Cane Juice 4 4 -

Maintenance
- Sulfur, Dry

Reduced
Potassium Iodide 4 4
Potassium Nitrate (Nitre, Saltpeter) 4 4 4 Molten, 260°F 4 4 -
Potassium Oxylate 4 4 5 Molten, 750°F 9 9 -
Potassium Permanganate 4 4 4 Sulfur Monochloride
(Rubber Vulcanizing)
4 4 -
Potassium Sulfate 4 4 4

Attachments
Potassium Sulfide 4 4 - Sulfur Dioxide Gas, Moist 0 5 -
Pyrogallic Acid 4 4 4 Sulfurous Acid Water Solution
Prussic Acid (Hydrocyanic Acid) 4 4 9 Atmospheric Pressure 4 4 -
Quinine Sulfate 4 4 5 Over 60 lbs. Pressure 9 9 -
Quinine Bisulfate 5 5 9 Sulfuric Acid
Rosin, Molten 4 4 4

Application
70°F 5 5 -

Specific
Salt (Sodium Chloride, Salt Brine)
Boiling 0 0 0
70°F 5 5 9
Fuming 9 9 -
150°F 5 5 9
Vapor (Battery Room) 5 5 -
Sea Water 5 5 9
Tannic Acid 4 4 5
Sewage, Sulfuric Acid Present -

Horsepower
5 5
Tanning Liquor 4 4 -

Tables
Silver Bromide 5 5 5
Silver Nitrate 4 4 4 Tartaric Acid 4 4 5
Soda Ash (Sodium Carbonate) 4 4 4 Tetrachloride of Tin 0 0 0
Sodium Acetate 4 4 4 Tin, Molten, 1100°F 0 0 0
Sodium Bicarbonate (Baking Soda) 4 4 4

Components
Trichloroethylene 5 5 5
Sodium Bisulfate, dilute 4 4 -
Chain
Uric Acid 4 4 4
Sodium Bisulfate 4 4 -
Varnish 4 4 4
Sodium Citrate 4 4 4
Vegetables 4 4 4
Sodium Chlorate 4 4 4
Vinegar (Acetic Acid) 4 4 9
Troubleshooting

Sodium Chloride (Salt, Salt Brine)

70°F 5 5 9 Whiskey 4 4 -
Tools,

150°F 5 5 9 Wood Pulp 4 4 -

Sodium Cyanide 4 4 - Yeast 4 4 -
Sodium Fluoride 5 5 5 Zinc, Molten, 1100°F 0 0 0
Sodium Hydroxide Zinc Chloride
Information

70°F 4 4 4
Ordering

100°F 4 4 9
Molten, 600°F 5 5 -
Boiling 9 9 -
Sodium Hypochlorite 5 5 9
Zinc Cyanide 4 4 -
Slightly Alkaline 4 4 -
Zinc Nitrate 4 4 -
Sodium Perchlorate 0 4 -
Zinc Sulfate (White Vitriol) 5 4 4
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 29

 Diamond
Chain

Reduced
Difference
Diamond

Maintenance
Selection
Guide
Carbon
Steel
& Moisture
Corrosion
Resistant
Maintenance

Duralube LIVE Roller Chain

Reduced

Reduced Maintenance Chains are intended for applications where regular lubrication is not possible or practical.
The life of these chains is significantly greater than a traditional chain that only has its initial lubrication. In all
Attachments

cases, life of reduced maintenance chain can be extended even further if regularly lubricated.

Diamond EHT Ideal for high speed, high temperature or abrasive environments, Diamond EHT (Enhanced Heat
Treatment) pins have been specially processed to provide exceptional wear performance in difficult
environments. Available as an option on most carbon steel chains.
Application
Specific

Duralube® LIVE Duralube LIVE is a reduced maintenance chain specifically designed for moderate speed, moderate
ambient temperature (<120°F/49°C), clean environments. Lubricant is impregnated into a specially
designed bushing and released during service, providing supplemental lubrication to the pin/bushing
joint. Duralube LIVE replaces the previous one-piece bushing/roller combination with a separate bushing
and live turning roller for additional wear performance.
Horsepower

Duralube LIVE Duralube LIVE Food Grade adds a H1 food-grade lubricant rated for incidental food contact and ACE
Tables

Food Grade plating for moisture resistance to the Duralube LIVE product.
RING LEADER® RING LEADER O-Ring chain is designed for applications that can introduce contaminants that can
O-Ring Chain cause buildup in the clearances on standard chain where lubricant enters the pin/bushing area. O-Ring
construction seals specially formulated lubrication into every joint and seals out contamination that can
shorten chain life. Ideal for abrasive environments.
Components
Chain
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

30 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Reduced Maintenance
Diamond EHT
Diamond EHT is a optional heat treatment that is available on most carbon steel Diamond Series roller chain*.

Difference
Diamond
EHT (Enhanced Heat Treatment) pins have a unique case-hardening that maintains the pin hardness in hot,
high speed, or abrasive applications. By maintaining pin hardness in the difficult environment, superior wear
performance is obtained. EHT is not a coating, but rather an enhancement to the case hardening of the pin
itself. In contrast to coatings or platings, EHT pins offer a consistent pin hardness over a wide temperature
range with no adverse wear if operated at ambient temperatures or lower speeds.

Selection
Guide
Please note that EHT is an available option on most carbon steel chains*; specify by adding EHT to the part
number (e.g. 60 EHT). The table below is a reference that contains the most popular EHT part numbers.
*EHT pins are not available for high strength, hoist or lift chain, as medium carbon through-hardened pins are
more appropriate for high shock applications. EHT pins are also not available for stainless steel chains.

Carbon
Steel
Single Strand

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,

& Moisture
COTTERED (C)

Corrosion

Resistant
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E)

Maintenance
Reduced
ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm kg/m kg
Standard Series

Attachments
40 EHT 0.500 0.313 0.312 0.156 0.060 0.720 0.670 0.410 0.475 0.410 4,000 55
12.70 7.94 7.92 3.96 1.52 18.29 17.02 10.41 12.07 0.61 1,814
50 EHT 0.625 0.375 0.400 0.200 0.080 0.890 0.830 0.512 0.594 0.680 6,600 57
15.88 9.53 10.16 5.08 2.03 22.61 21.08 13.00 15.09 1.01 2,994
60 EHT 0.750 0.500 0.469 0.234 0.094 1.110 1.040 0.615 0.713 0.990 8,500 58
19.05 12.70 11.913 5.944 2.39 28.19 26.416 15.62 18.11 1.47 3,856
80 EHT 1.000 0.625 0.625 0.312 0.125 1.440 1.320 0.820 0.950 1.730 14,500 59

Application
25.40 15.88 15.88 7.92 3.18 36.58 33.53 20.83 24.13 2.57 6,577

Specific
100 EHT 1.250 0.750 0.750 0.375 0.156 1.730 1.610 1.025 1.188 2.510 24,000 60
31.75 19.05 19.05 9.53 3.96 43.94 40.89 26.04 30.18 3.74 10,886
120 EHT 1.500 1.000 0.875 0.437 0.187 2.140 2.000 1.230 1.425 3.690 34,000 61
38.10 25.40 22.23 11.10 4.75 54.36 50.80 31.24 36.20 5.49 15,422
Heavy Series

Horsepower
60H EHT 0.750 0.500 0.469 0.234 0.125 1.240 1.170 0.615 0.713 1.180 8,500 67

Tables
19.05 12.70 11.91 5.94 3.18 31.50 29.72 15.62 18.11 1.76 3,856
80H EHT 1.000 0.625 0.625 0.312 0.156 1.570 1.450 0.820 0.950 2.020 14,500 68
25.40 15.88 15.88 7.92 3.96 39.88 36.83 20.83 24.13 3.01 6,577
100H EHT 1.250 0.750 0.750 0.375 0.187 1.860 1.740 1.025 1.188 2.820 24,000 69
31.75 19.05 19.05 9.53 4.75 47.24 44.20 26.04 30.18 4.20 10,886

Components
Chain
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 31

 Diamond
Chain

Reduced Maintenance
Duralube LIVE® / Duralube LIVE Food Grade
Duralube LIVE is a reduced maintenance chain intended for clean, dust-free applications. Lubricant is impregnated
Difference
Diamond

into the bushing and released during service, providing supplemental lubrication to the pin/bushing joint. Duralube
LIVE replaces the one-piece roller/bushing of the original Duralube product with a separate bushing and live roller,
Duralube LIVE Food grade adds a H1 food grade lubricant rated for incidental food contact and ACE (Anti Corrosion
Exterior) plating for moisture resistance to the standard Duralube LIVE product.
Specify Duralube LIVE as DLR, specify Duralube LIVE Food Grade as DLF
Selection
Guide

Standard Chain Multistrand Chain (-X Suffix)

CHAIN WIDTH,
CHAIN WIDTH, COTTERED (C)
RIVETED (R)
CHAIN WIDTH, ROLLER CENTER TO
CHAIN WIDTH,
Carbon

RIVETED (R) WIDTH CENTER (K)

Steel

COTTERED (C) ROLLER

WIDTH CHAIN WIDTH, ROLL
RIVETED (R) WIDT
ROLLER DIAMETER PITCH
ROLLER DIAMETER PITCH

ROLLER LINK PIN LINK

HEIGHT (H) HEIGHT (E) ROLLER LINK PIN LINK ROLLER LINK
& Moisture

HEIGHT (H
Corrosion

HEIGHT (E)
Resistant

HEIGHT (H)

ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile
Number Diameter Diameter Thickness Strength†
Maintenance

in in in in in in in in in in lbs/ft lbs
Reduced

mm mm mm mm mm mm mm mm mm mm kg/m kg
40 DLR 0.500 0.313 0.312 0.156 0.060 0.720 0.670 - 0.410 0.475 0.400 3300
12.70 7.94 7.925 3.962 1.52 18.29 17.018 - 10.41 12.07 0.60 1,497
40-2 DLR 0.500 0.313 0.312 0.156 0.060 1.290 1.240 0.566 0.410 0.475 0.810 6,600
12.70 7.94 7.92 3.96 1.52 32.77 31.50 14.38 10.41 12.07 1.21 2,994
50 DLR 0.625 0.375 0.400 0.200 0.080 0.890 0.830 - 0.512 0.594 0.650 5,200
Attachments

15.88 9.53 10.16 5.08 2.03 22.61 21.08 - 13.00 15.09 0.97 2,359
50-2 DLR 0.625 0.375 0.400 0.200 0.080 1.600 1.550 0.713 0.512 0.594 1.270 10,400
15.88 9.53 10.16 5.08 2.03 40.64 39.37 18.11 13.00 15.09 1.89 4,717
60 DLR 0.750 0.500 0.469 0.234 0.094 1.110 1.040 - 0.615 0.713 0.950 7,400
19.05 12.70 11.91 5.94 2.39 28.19 26.42 - 15.62 18.11 1.41 3,357
60-2 DLR 0.750 0.500 0.469 0.234 0.094 2.010 1.940 0.897 0.615 0.713 1.850 14,800
19.05 12.70 11.91 5.94 2.39 51.05 49.28 22.78 15.62 18.11 2.75 6,713
Application
Specific

80 DLR 1.000 0.625 0.625 0.312 0.125 1.440 1.320 - 0.82 0.950 1.600 13,000
25.40 15.88 15.88 7.92 3.18 36.58 33.53 - 20.83 24.13 2.38 5,897
80-2 DLR 1.000 0.625 0.625 0.312 0.125 2.590 2.470 - 0.82 0.950 2.797 24,000
25.40 15.88 15.88 7.92 3.18 65.79 62.74 - 20.83 24.13 4.16 10,886

Due to the nature of the Duralube LIVE construction, the following speed and temperature limitations should be considered.
Horsepower
Tables

Size Max Speed

Single Pitch
#40 1300 ft/min (396 meters/min)
#50 1000 ft/min (304 meters/min)
Components

#60 850 ft/min (259 meters/min)

Chain

#80 650 ft/min (198 meters/min)

Ambient temperature should not exceed 120°F (49°C)

Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

32 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Reduced Maintenance
XLO O-Ring Chain
XLO O-Ring Chain is specially designed for applications such as agriculture, packaging, printing, textile and chemical

Difference
Diamond
processing that can introduce contaminants that can damage standard chain. Dirt, mud, dust, paper fines, food
particles and moisture can cause buildup on the chain on a standard roller chain and actually damage the surface of
pins and bushings.
XLO Chain is constructed with O-rings that seal in a specially formulated lubricant into every joint and seal out dirt,
contaminants and moisture. Standard XLO chain can operate in ambient temperatures up to 150°F (65°C), while an

Selection
Guide
optional O-ring can allow operation in temperatures up to 450°F (232°C) (sizes 50-100 only).
Note: Diamond Chain recommends periodic lubrication on the external O-ring surfaces along with the roller/sprocket
contact surfaces.

Carbon
Steel
Standard chain Oval contour (C20x0)

CHAIN WIDTH, ROLLER CHAIN WIDTH, CHAIN WIDTH, ROLLER CHAIN WIDTH,
RIVETED (R) WIDTH COTTERED (C) RIVETED (R) WIDTH COTTERED (C)

& Moisture
CHAIN WIDTH,

Corrosion

Resistant
COTTERED (C)
ROLLER DIAMETER PITCH CHAIN WIDTH, ROLLER DIAMETER PITCH CENTER TO
RIVETED (R) CENTER (K)
LINK PLATE
ROLLER LINK PIN LINK HEIGHT (H)
HEIGHT (H) HEIGHT (E)

Maintenance
Reduced
ASME/ANSI Pitch Roller Width Roller Pin Link Plate C R K E** H** Avg. Weight Avg. Tensile Horsepower
Number Diameter Diameter Thickness Strength† Table
in in in in in in in in in in lbs/ft lbs page
mm mm mm mm mm mm mm mm mm mm kg/m kg

Attachments
50 XLO 0.625 0.375 0.400 0.200 0.080 0.950 0.890 0.512 0.594 0.720 6,500 3300 80
15.88 9.53 10.16 5.08 2.03 24.13 22.61 13.00 15.09 1.07 2,948 1,497
50H XLO 0.625 0.375 0.400 0.214 0.094 1.020 0.960 0.512 0.594 0.930 9,300 6,600 n/a
15.88 9.53 10.16 5.44 2.39 25.91 24.38 13.00 15.09 1.38 4,218 2,994
60 XLO 0.750 0.500 0.469 0.234 0.094 1.210 1.130 0.615 0.713 1.010 7,700 5,200 81
19.05 12.70 11.91 5.94 2.39 30.73 28.70 15.62 18.11 1.50 3,493 2,359
80 XLO 1.000 0.625 0.625 0.312 0.125 1.510 1.410 0.615 0.713 1.770 13,500 10,400 82

Application
25.40 15.88 15.88 7.92 3.18 38.35 35.81 15.62 18.11 2.63 6,123 4,717

Specific
100 XLO 1.250 0.750 0.750 0.375 0.156 1.830 1.740 1.025 1.188 2.550 22,000 7,400 83
31.75 19.05 19.05 9.53 3.96 46.48 44.20 26.04 30.18 3.79 9,979 3,357
120 XLO 1.500 1.000 0.875 0.437 0.187 2.240 2.120 1.23 1.425 3.760 30,000 14,800 n/a
38.10 25.40 22.23 11.10 4.75 56.90 53.85 31.24 36.20 5.60 13,608 6,713
140 XLO 1.750 1.000 1.000 0.500 0.219 2.490 2.350 1.435 1.663 5.100 42,000 13,000 n/a
44.45 25.40 25.40 12.70 5.56 63.25 59.69 36.45 42.24 7.59 19,051 5,897

Horsepower
160 XLO 2.000 1.250 1.125 0.562 0.250 2.960 2.820 1.640 1.900 6.660 52,000 13,000 n/a

Tables
50.80 31.75 28.58 14.27 6.35 75.18 71.63 41.66 48.26 9.91 23,587 5,897
C2050 XLO 1.250 0.375 0.400 0.200 0.080 0.950 0.890 0.594 0.594 0.590 6,500 3,300 n/a
31.75 9.53 10.16 5.08 2.03 24.13 22.61 15.09 15.09 0.88 2,948 1,497
C2060H XLO 1.500 0.500 0.469 0.234 0.125 1.270 1.210 0.712 0.712 1.170 7,700 5,200 n/a
38.10 12.70 11.91 5.94 3.18 32.26 30.73 18.08 18.08 1.74 3,493 2,359

Components
Chain
Troubleshooting
Tools,
Information
Ordering

** Maximum value listed.

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 33

 Diamond
Chain
Difference
Diamond

Attachments
Selection
Guide
Carbon
Steel
& Moisture
Corrosion
Resistant

Extended Pin Roller Chain

Diamond Chain offers an extensive assortment of attachments - over 100 “standard” attachments are available, plus
Maintenance

the ability to create almost any kind of custom attachment. Our attachments are designed with the same level of care
Reduced

and precision as our chain; high-volume attachments have dedicated tooling and presses to quickly and repeatedly
produce parts for an order, while lower volume and custom designs are fabricated using our laser fabrication cell that
allows precision cutting without long equipment changeover or extensive tooling times.
This section details our standard attachments that can accommodate a variety of uses. However, in some cases
Attachments

attachment chain is very specific to the application (e.g. pin over chain, thermoforming chain, serrated top chain).
If the desired attachment is not found in this section, please reference the “application specific” section of this
catalog. If still not located, please contact Diamond Chain to learn how custom parts can be created for your specific
application.
Attachment Chain Guidelines:
Application
Specific

Modifications: All attachments are designed and heat treated to permit further operations by the user such as
drilling, reaming and tapping. Welding, however, should never be performed as it can adversely affect the heat
treatment of the material.
Extended pins: Extended pins are made from medium carbon through-hardened steel and specially heat treated for
Horsepower

ductility and toughness.

Tables

Shouldered pins: Diamond does not recommend the use of “shouldered pins”, as quality is compromised due to
high stress concentration where the diameters change. Additions of sleeves or bearings on extended pins often yield
a more dependable design at a lower cost.
Components

Attachment hole sizes: If the application requires a different attachment hole than shown, please contact Diamond
as alternative lug holes may be available.
Chain

Length matching: For applications requiring two or more chains to run in parallel with “flights” joining the chain,
it is critical to have the chains ordered as a set, matched for length, and installed on the machinery with the same
relationship to one another as when manufactured.
Troubleshooting

Standard chain tolerance: ASME/ANSI tolerance on a chain is +0.016"/-0.000 per foot.

Tools,

Class 1 matching: ensures the longest and shortest chain in a set do not vary in length by more than 0.006"/ft.
Class 2 matching: ensures the longest and shortest chain in a set do not vary in length by more than 0.002"/ft.
Information
Ordering
Conditions
Terms and

34 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Attachment Summary
This list provides an at-a-glance reference for standard Diamond Chain Attachments. Details are included in the
following pages. If the desired attachment is not found in this section, please reference the Specialty Applications

Difference
Diamond
section of this catalog. If still not located, please contact Diamond Chain to learn how custom parts can be created for
your specific application.

Selection
Guide
Single Pitch Double Pitch
Diamond Tsubaki Renold Drives Standard Attachments Diamond Tsubaki Renold Drives
Standard Attachments (applies to regular and oversized rollers)

Bent Link Plate Bent Link Plate

B1-1H A-1 A-1 BA-1 B1-1H A-1 A-1 BA-1
one side - one hole one side - one hole

Carbon
Steel
Bent Link Plate Bent Link Plate
B2-1H K-1 K-1 BK-1 B1-2H A-2 A-2 BA-2
two sides - one hole one side - two holes

Wide Contour

& Moisture
Bent Link Plate

Corrosion

Resistant
Bent Link Plate WCB1-1H WA-1 WA-1 WBA-1 B2-1H K-1 K-2 BK-1
two sides - one hole
one side - one hole

Wide Contour
Bent Link Plate
Bent Link Plate WCB1-2H WA-2 WA-2 WBA-2 B2-2H K-2 K-2 BK-2
two sides - two holes
one side - two holes

Maintenance
Reduced
Wide Contour
Straight Link Plate
Bent Link Plate WCB2-1H WK-1 WK-1 WBK-1 S1-1H SA-1 M-35 SA-1
one side -one hole
two sides - one hole

Wide Contour
Straight Link Plate
Bent Link Plate WCB2-2H WK-2 WK-2 WBK-2 S1-2H SA-2 M-35-2 SA-2

Attachments
one side - two holes
two sides - two holes

Straight Link Plate Straight Link Plate

S1-1H SA-1 M-35 SA-1 S2-1H SK-1 M-1 SK-1
one side - one hole two sides - one hole

Straight Link Plate Straight Link Plate

Application
S2-1H SK-1 M-1 SK-1 S2-2H SK-2 M-2 SK-2

Specific
two sides - one hole two sides - two holes

Wide Contour
Straight Link Plate WCS1-1H WSA-1 WM-35 WSA-1 One Pin Extended E1 D-1 D-1 D-1
one side - one hole

Horsepower
Wide Contour

Tables
Straight Link Plate WCS1-2H WSA-2 WM-35-2 WSA-2 Two Pins Extended E2 D-3 D-3 D-3
one side - two holes

Wide Contour
Straight Link Plate WCS2-1H WSK-1 WM-1 WSK-1

Components
two sides - one hole

Wide Contour Chain

Straight Link Plate WCS2-2H WSK-2 WM-2 WSK-2
two sides - two holes
Troubleshooting

One Pin Extended E1 D-1 D-1 D-1

Tools,

Two Pins Extended E2 D-3 D-3 D-3

Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 35

 Diamond
Chain

Attachments
Standard Straight Attachments
Attachments availabe for all chain types and platings. Extended leadtimes may apply.
Difference
Diamond

L D T T
Description Diamond P/N Others P/N
K
One side, one hole S1-1H M-35, SA-1 S

Two sides, one hole S2-1H M-1, SK-1 R

PITCH
Selection
Guide

ASME/ANSI Pitch D K L R Max. S T

Number
in in in in in in in
mm mm mm mm mm mm mm
25 / 25SS 0.250 0.125 0.451 0.218 0.119 0.308 0.030
6.35 3.18 11.455 5.54 3.02 7.82 0.76
Carbon
Steel

35 / 35SS 0.375 0.102 0.577 0.312 0.178 0.387 0.050

9.53 2.59 14.656 7.92 4.52 9.83 1.27
40 / 40SS 0.500 0.141 0.684 0.375 0.238 0.489 0.060
12.70 3.58 17.374 9.53 6.05 12.42 1.52
41 / 41SS 0.500 0.141 0.698 0.375 0.192 0.482 0.050
12.70 3.58 17.729 9.53 4.88 12.24 1.27
& Moisture
Corrosion
Resistant

50 / 50SS 0.625 0.203 0.895 0.500 0.297 0.618 0.080

15.88 5.16 22.733 12.70 7.54 15.70 2.03
60 / 60SS 0.750 0.203 1.038 0.625 0.356 0.716 0.094
19.05 5.16 26.365 15.88 9.04 18.19 2.39
80 / 80SS 1.000 0.266 1.339 0.750 0.475 0.968 0.125
25.40 6.76 34.011 19.05 12.07 24.59 3.18
Maintenance
Reduced

100 1.250 0.343 1.696 1.000 0.594 1.233 0.156

31.75 8.71 43.078 25.40 15.09 31.32 3.96
120 1.500 0.386 2.024 1.125 0.713 1.424 0.187
38.10 9.80 51.410 28.58 18.11 36.17 4.75
140 1.750 0.448 2.445 1.375 0.831 1.750 0.220
44.45 11.38 62.103 34.93 21.11 44.45 5.59
Attachments

160 2.000 0.516 2.756 1.500 0.950 2.007 0.250

50.80 13.11 70.002 38.10 24.13 50.98 6.35

Wide Contour Straight Attachments

Attachments available for all chain types and platings. Extended leadtimes may apply.
Application
Specific

Description Diamond P/N Others P/N Lw

T T D
P
One side, one hole WCS1-1H WM-35, WSA-1
One side, two holes WCS1-2H WM-35-2, WSA-2 Sw
K

Two sides, one hole WCS2-1H WM-1, WSK-1 R

Horsepower

Two sides, two holes WCS2-2H WM-2, WSK-2 PITCH

Tables

ASME/ANSI Pitch D K Lw P R Max. Sw T W X

Number
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm
Components

35 / 35SS 0.375 0.125 0.577 0.727 0.375 0.178 0.399 0.050 1.105 0.750
Chain

9.53 3.18 14.66 18.47 9.53 4.52 10.13 1.27 28.07 19.05
40 / 40SS 0.500 0.141 0.684 0.946 0.500 0.238 0.503 0.060 1.366 1.000
12.70 3.58 17.37 24.03 12.70 6.05 12.78 1.52 34.70 25.40
41 0.500 0.141 0.698 0.878 0.500 0.192 0.482 0.050 1.372 0.937
12.70 3.58 17.73 22.30 12.70 4.88 12.24 1.27 34.85 23.80
Troubleshooting

50 / 50SS 0.625 0.203 0.895 1.211 0.625 0.297 0.618 0.080 1.807 1.250
15.88 5.16 22.73 30.76 15.88 7.54 15.70 2.03 45.90 31.75
Tools,

60 / 60SS 0.750 0.203 1.038 1.420 0.750 0.356 0.716 0.094 2.135 1.500
19.05 5.16 26.37 36.07 19.05 9.04 18.19 2.39 54.23 38.10
80 / 80SS 1.000 0.266 1.339 1.885 1.000 0.475 0.967 0.125 2.750 2.000
25.40 6.76 34.01 47.88 25.40 12.07 24.56 3.18 69.85 50.80
100 1.250 0.343 1.696 2.362 1.250 0.594 1.233 0.156 3.408 2.500
Information

31.75 8.71 43.08 59.99 31.75 15.09 31.32 3.96 86.56 63.50
Ordering

120 1.500 0.386 2.023 2.836 1.500 0.713 1.424 0.187 4.239 2.995
38.10 9.80 51.38 72.03 38.10 18.11 36.17 4.75 107.67 76.07
Conditions
Terms and

36 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Attachments
Standard Bent Attachments
Attachments available for all chain types and platings. Extended leadtimes may apply.

Difference
Diamond
R R
H H
Description Diamond P/N Others P/N L D
T T

One side, one hole B1-1H A1, BA-1

Two sides, one hole B2-1H K1, BK-1 WI X WO

Selection
Guide
ASME/ANSI Pitch D H L R Max. T WI WO X
Number
in in in in in in in in in
mm mm mm mm mm mm mm mm mm

Carbon
25 / 25SS 0.250 0.125 0.180 0.218 0.119 0.030 0.781 0.843 0.562

Steel
6.35 3.18 4.572 5.54 3.02 0.76 19.84 21.41 14.27
35 / 35SS 0.375 0.102 0.250 0.312 0.178 0.050 1.125 1.125 0.750
9.53 2.59 6.350 7.92 4.52 1.27 28.58 28.58 19.05
40 / 40SS 0.500 0.141 0.312 0.375 0.238 0.060 1.390 1.390 1.000
12.70 3.58 7.925 9.53 6.05 1.52 35.31 35.31 25.40

& Moisture
41 / 41SS 0.500 0.141 0.282 0.375 0.192 0.050 1.375 1.375 0.937

Corrosion

Resistant
12.70 3.58 7.163 9.53 4.88 1.27 34.93 34.93 23.80
50 / 50SS 0.625 0.203 0.406 0.500 0.297 0.080 1.812 1.812 1.250
15.88 5.16 10.312 12.70 7.54 2.03 46.02 46.02 31.75
60 / 60SS 0.750 0.203 0.478 0.625 0.356 0.094 2.135 2.135 1.500
19.05 5.16 12.141 15.88 9.04 2.39 54.23 54.23 38.10
80 / 80SS 1.000 0.266 0.625 0.750 0.475 0.125 2.750 2.750 2.000

Maintenance
Reduced
25.40 6.76 15.875 19.05 12.07 3.18 69.85 69.85 50.80
100 1.250 0.343 0.784 1.000 0.594 0.156 3.077 3.406 2.500
31.75 8.71 19.914 25.40 15.09 3.96 78.16 86.51 63.50
120 1.500 0.386 0.917 1.125 0.713 0.187 3.841 4.239 2.995
38.10 9.80 23.292 28.58 18.11 4.75 97.56 107.67 76.07
140 1.750 0.448 1.127 1.375 0.831 0.220 4.361 4.826 3.500

Attachments
44.45 11.38 28.626 34.93 21.11 5.59 110.77 122.58 88.90
160 2.000 0.516 1.250 1.500 0.950 0.250 5.078 5.609 4.000
50.80 13.11 31.750 38.10 24.13 6.35 128.98 142.47 101.60

Wide Contour Bent Attachments

Application
Specific
Attachments available for all chain types and platings. Extended leadtimes may apply.
P T
Description Diamond P/N Others P/N D

One side, one hole WCB1-1H WA-1, WBA-1

W

Horsepower
X
One side, two holes WCB1-2H WA-2, WBA-2

Tables
Two sides, one hole WCB2-1H WK-1, WBK-1 R R
D T
Two sides, two holes WCB2-2H WK-2, WBK-2 Lw Hw Hw

ASME/ANSI Pitch D Hw Lw P R Max. T W X

Number

Components
in in in in in in in in in
Chain
mm mm mm mm mm mm mm mm mm
35 / 35SS 0.375 0.125 0.262 0.727 0.375 0.178 0.050 1.105 0.750
9.53 3.18 6.655 18.47 9.53 4.52 1.27 28.07 19.05
40 / 40SS 0.500 0.141 0.326 0.946 0.500 0.238 0.060 1.366 1.000
Troubleshooting

12.70 3.58 8.280 24.03 12.70 6.05 1.52 34.70 25.40

41 0.500 0.141 0.282 0.878 0.500 0.192 0.050 1.372 0.937
Tools,

12.70 3.58 7.163 22.30 12.70 4.88 1.27 34.85 23.80

50 / 50SS 0.625 0.203 0.406 1.211 0.625 0.297 0.080 1.807 1.250
15.88 5.16 10.312 30.76 15.88 7.54 2.03 45.90 31.75
60 / 60SS 0.750 0.203 0.478 1.420 0.750 0.356 0.094 2.135 1.500
19.05 5.16 12.14 36.07 19.05 9.04 2.39 54.23 38.10
80 / 80SS 1.000 0.266 0.625 1.885 1.000 0.475 0.125 2.750 2.000
Information
Ordering

25.40 6.76 15.88 47.88 25.40 12.07 3.18 69.85 50.80

100 1.250 0.343 0.784 2.362 1.250 0.594 0.156 3.408 2.500
31.75 8.71 19.91 59.99 31.75 15.09 3.96 86.56 63.50
120 1.500 0.386 0.917 2.836 1.500 0.713 0.187 4.239 2.995
38.10 9.80 23.29 72.03 38.10 18.11 4.75 107.67 76.07
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 37

 Diamond
Chain

Attachments
Double Pitch Oval Contour Straight Attachments
Attachments available for all chain types and platings. Extended leadtimes may apply.
Difference
Diamond

Description Diamond P/N Others P/N T T L

B
One side, one hole S1-1H M-35, SA-1
One side, two holes S1-2H M-35-2, SA-2 K

Two sides, one hole S2-1H M-1, SK-1

Selection
Guide

Two sides, two holes S2-2H M-2, SK-2 PITCH

ASME/ANSI Pitch Roll Two Attachment Holes K L T One Attachment Hole

Number Diameter
B D S D1 S1
in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm
Carbon
Steel

C2040 / 1.000 0.312 0.375 0.141 0.531 0.773 0.750 0.060 0.188 0.438
C2040SS 25.40 7.92 9.53 3.58 13.49 19.63 19.05 1.52 4.78 11.13
C2050 / 1.250 0.400 0.469 0.203 0.625 0.971 0.937 0.080 0.250 0.563
C2050SS 31.75 10.16 11.91 5.16 15.88 24.66 23.80 2.03 6.35 14.30
C2060H 1.500 0.469 0.562 0.203 0.750 1.203 1.125 0.125 0.329 0.688
38.10 11.91 14.27 5.16 19.05 30.56 28.58 3.18 8.36 17.48
& Moisture
Corrosion
Resistant

C2060SS 1.500 0.469 0.562 0.203 0.750 1.203 1.125 0.094 0.329 0.688
38.10 11.91 14.27 5.16 19.05 30.56 28.58 2.39 8.36 17.48
C2080H 2.000 0.625 0.750 0.266 1.000 1.590 1.500 0.156 0.375 0.875
50.80 15.88 19.05 6.76 25.40 40.39 38.10 3.96 9.53 22.23
C2080SS 2.000 0.625 0.750 0.266 1.000 1.590 1.500 0.125 0.375 0.875
Maintenance

50.80 15.88 19.05 6.76 25.40 40.39 38.10 3.18 9.53 22.23
Reduced

C2100H 2.500 0.750 0.937 0.328 1.250 1.982 1.875 0.187 0.516 1.125
63.50 19.05 23.80 8.33 31.75 50.34 47.63 4.75 13.11 28.58
C2120H 3.000 0.875 1.125 0.391 1.469 2.367 2.250 0.219 0.563 1.312
76.20 22.23 28.58 9.93 37.31 60.12 57.15 5.56 14.30 33.32
C2160H 4.000 1.125 1.500 0.516 2.000 3.090 3.000 0.281 0.750 1.750
Attachments

101.60 28.58 38.10 13.11 50.80 78.49 76.20 7.14 19.05 44.45

Double Pitch Oval Contour Straight Attachments Oversized Roller

Attachments available for all chain types and platings. Extended leadtimes may apply.
Application
Specific

Description Diamond P/N Others P/N T T

L D1 D
One side, one hole S1-1H M-35, SA-1
One side, two holes S1-2H M-35-2, SA-2 S1 S

Two sides, one hole S2-1H M-1, SK-1

Horsepower

B
Two sides, two holes S2-2H M-2, SK-2
Tables

ASME/ANSI Pitch Roll Two Attachment Holes K L T One Attachment Hole

Number Diameter
B D S D1 S1
in in in in in in in in in in
Components

mm mm mm mm mm mm mm mm mm mm
C2040 / 1.000 0.312 0.375 0.141 0.531 0.773 0.750 0.060 0.188 0.438
Chain

C2040SS 25.40 7.92 9.53 3.58 13.49 19.63 19.05 1.52 4.78 11.13
C2050 / 1.250 0.400 0.469 0.203 0.625 0.971 0.937 0.080 0.250 0.563
C2050SS 31.75 10.16 11.91 5.16 15.88 24.66 23.80 2.03 6.35 14.30
C2060H 1.500 0.469 0.562 0.203 0.750 1.203 1.125 0.125 0.329 0.688
Troubleshooting

38.10 11.91 14.27 5.16 19.05 30.56 28.58 3.18 8.36 17.48
C2060SS 1.500 0.469 0.562 0.203 0.750 1.203 1.125 0.094 0.329 0.688
Tools,

38.10 11.91 14.27 5.16 19.05 30.56 28.58 2.39 8.36 17.48
C2080H 2.000 0.625 0.750 0.266 1.000 1.590 1.500 0.156 0.375 0.875
50.80 15.88 19.05 6.76 25.40 40.39 38.10 3.96 9.53 22.23
C2080SS 2.000 0.625 0.750 0.266 1.000 1.590 1.500 0.125 0.375 0.875
50.80 15.88 19.05 6.76 25.40 40.39 38.10 3.18 9.53 22.23
Information

C2100H 2.500 0.750 0.937 0.328 1.250 1.982 1.875 0.187 0.516 1.125
Ordering

63.50 19.05 23.80 8.33 31.75 50.34 47.63 4.75 13.11 28.58
C2120H 3.000 0.875 1.125 0.391 1.469 2.367 2.250 0.219 0.563 1.312
76.20 22.23 28.58 9.93 37.31 60.12 57.15 5.56 14.30 33.32
C2160H 4.000 1.125 1.500 0.516 2.000 3.090 3.000 0.281 0.750 1.750
101.60 28.58 38.10 13.11 50.80 78.49 76.20 7.14 19.05 44.45
Conditions
Terms and

38 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Attachments
Double Pitch Oval Contour Bent Attachments
Attachments available for all chain types and platings. Extended leadtimes may apply.

Difference
Diamond
Description Diamond P/N Others P/N H
T
H
L D

One side, one hole B1-1H A-1, BA-1

A
One side, two holes B1-2H A-2, BA-2 WI X WO

Two sides, one hole B2-1H K-1, BK-1

Selection
Two sides, two holes B2-2H K-2, BK-2

Guide
T B PITCH

ASME/ANSI Pitch Roller A B D H L T WI WO X

Number Diameter
in in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm mm
C2040 1.000 0.312 0.500 0.375 0.141 0.359 0.750 0.060 1.350 1.483 1.000

Carbon
Steel
25.40 7.92 12.70 9.53 3.58 9.12 19.05 1.52 34.29 37.67 25.40
C2040SS 1.000 0.312 0.500 0.375 0.141 0.355 0.750 0.060 1.350 1.488 1.000
25.40 7.92 12.70 9.53 3.58 9.02 19.05 1.52 34.29 37.80 25.40
C2050 1.250 0.400 0.625 0.469 0.203 0.453 0.937 0.080 1.692 1.863 1.250
31.75 10.16 15.88 11.91 5.16 11.51 23.80 2.03 42.98 47.32 31.75
C2050SS 1.250 0.400 0.625 0.469 0.203 0.453 0.937 0.080 1.692 1.863 1.250

& Moisture
Corrosion

Resistant
31.75 10.16 15.88 11.91 5.16 11.51 23.80 2.03 42.98 47.32 31.75
C2060H 1.500 0.469 0.844 0.562 0.203 0.578 1.125 0.125 2.171 2.446 1.688
31.75 10.16 15.88 11.91 5.16 11.51 23.80 2.03 42.98 47.32 31.75
C2060SS 1.500 0.469 0.844 0.562 0.203 0.561 1.125 0.094 2.115 2.317 1.688
38.10 11.91 21.44 14.27 5.16 14.68 28.58 3.18 55.14 62.13 42.88
C2080H 2.000 0.625 1.094 0.750 0.266 0.766 1.500 0.156 2.792 3.125 2.188

Maintenance
Reduced
38.10 11.91 21.44 14.27 5.16 14.25 28.58 2.39 53.72 58.85 42.88
C2080SS 2.000 0.625 1.094 0.750 0.266 0.739 1.500 0.125 2.760 3.028 2.188
50.80 15.88 27.79 19.05 6.76 19.46 38.10 3.96 70.92 79.38 55.58
C2100H 2.500 0.750 1.312 0.937 0.328 0.922 1.875 0.187 3.554 3.951 2.625
63.50 19.05 33.32 23.80 8.33 23.42 47.63 4.75 90.27 100.36 66.68
C2120H 3.000 0.875 1.562 1.125 0.391 1.095 2.250 0.219 4.318 4.782 3.125

Attachments
76.20 22.23 39.67 28.58 9.93 27.81 57.15 5.56 109.68 121.46 79.38
C2160H 4.000 1.125 2.063 1.500 0.516 1.438 3.000 0.281 5.520 6.116 4.125
101.60 28.58 52.40 38.10 13.11 36.53 76.20 7.14 140.21 155.35 104.78

Double Pitch Oval Contour Bent Attachments Oversized Roller

Attachments available for all chain types and platings. Extended leadtimes may apply.
H H

Application
L D

Specific
Description Diamond P/N Others P/N T

One side, one hole B1-1H A-1, BA-1 A

WO
One side, two holes B1-2H A-2, BA-2 WI X

Two sides, one hole B2-1H K-1, BK-1

Horsepower
Two sides, two holes B2-2H K-2, BK-2 B PITCH T

Tables
ASME/ANSI Pitch Roller A B D H L T WI WO X
Number Diameter
in in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm mm
C2042 1.000 0.625 0.500 0.375 0.141 0.359 0.750 0.060 1.350 1.483 1.000

Components
25.40 15.88 12.70 9.53 3.58 9.12 19.05 1.52 34.29 37.67 25.40

Chain
C2042SS 1.000 0.625 0.500 0.375 0.141 0.355 0.750 0.060 1.350 1.488 1.000
25.40 15.88 12.70 9.53 3.58 9.02 19.05 1.52 34.29 37.80 25.40
C2052 1.250 0.750 0.625 0.469 0.203 0.453 0.937 0.080 1.692 1.863 1.250
31.75 19.05 15.88 11.91 5.16 11.51 23.80 2.03 42.98 47.32 31.75
C2052SS 1.250 0.750 0.625 0.469 0.203 0.453 0.937 0.080 1.692 1.863 1.250
Troubleshooting

31.75 19.05 15.88 11.91 5.16 11.51 23.80 2.03 42.98 47.32 31.75
C2062H 1.500 0.875 0.844 0.562 0.203 0.578 1.125 0.125 2.171 2.446 1.688
Tools,

38.10 22.23 21.44 14.27 5.16 14.68 28.58 3.18 55.14 62.13 42.88
C2062SS 1.500 0.875 0.844 0.562 0.203 0.561 1.125 0.094 2.115 2.317 1.688
38.10 22.23 21.44 14.27 5.16 14.25 28.58 2.39 53.72 58.85 42.88
C2082H 2.000 1.125 1.094 0.750 0.266 0.766 1.500 0.156 2.792 3.125 2.188
50.80 28.58 27.79 19.05 6.76 19.46 38.10 3.96 70.92 79.38 55.58
C2082SS 2.000 1.125 1.094 0.750 0.266 0.739 1.500 0.125 2.760 3.028 2.188
Information
Ordering

50.80 28.58 27.79 19.05 6.76 18.77 38.10 3.18 70.10 76.91 55.58
C2102H 2.500 1.562 1.312 0.937 0.328 0.922 1.875 0.187 3.554 3.951 2.625
63.50 39.67 33.32 23.80 8.33 23.42 47.63 4.75 90.27 100.36 66.68
C2122H 3.000 1.750 1.562 1.125 0.391 1.095 2.250 0.219 4.318 4.782 3.125
76.20 44.45 39.67 28.58 9.93 27.81 57.15 5.56 109.68 121.46 79.38
C2162H 4.000 2.250 2.063 1.500 0.516 1.438 3.000 0.281 5.520 6.116 4.125
Conditions
Terms and

101.60 57.15 52.40 38.10 13.11 36.53 76.20 7.14 140.21 155.35 104.78

diamondchain.com | 1-800 US CHAIN (872-4246) 39

 Diamond
Chain

Attachments
Wide-Tall Lugs
Attachments available for all chain types and platings.
Difference
Diamond

Extended leadtimes may apply.

Wide-tall lugs are available in any height up to the K Max. specified below.
Please contact customer service for ordering detail.
Selection
Guide

ASME/ANSI Pitch K Max. L OA T

Number
in in in in in
mm mm mm mm mm
35 0.375 1.290 0.713 1.459 0.050
9.53 32.77 18.11 37.06 1.27
Carbon
Steel

40 0.500 1.560 0.971 1.796 0.060

12.70 39.62 24.66 45.62 1.52
41 0.500 1.560 0.878 1.749 0.050
12.70 39.62 22.30 44.42 1.27
50 0.625 1.810 1.209 2.103 0.080
15.88 45.97 30.71 53.42 2.03
& Moisture
Corrosion
Resistant

60 0.750 2.049 1.420 2.384 0.094

19.05 52.04 36.07 60.55 2.39
80 1.000 2.485 1.885 2.930 0.125
25.40 63.12 47.88 74.42 3.18
100 1.250 2.927 2.362 3.483 0.156
31.75 74.35 59.99 88.47 3.96
Maintenance
Reduced
Attachments

Double Straight and Double Bent Lugs

Application
Specific

L D T
Roller Lug
RL
Link Plate
Attachments available for all chain types and platings. L Pin Lug
PL
Extended leadtimes may apply. Link Plate
S
Double straight and bent lugs are highly customizable; 2K 2H
Please contact customer service for ordering detail.
Horsepower
Tables

R T
D X/2

ASME/ANSI Pitch D 2H 2K L PL RL R S T X/2

Number
Components

in in in in in in in in in in in
mm mm mm mm mm mm mm mm mm mm mm
Chain

40 0.500 0.133 0.524 1.567 0.375 0.219 0.281 0.236 0.502 0.060 0.500
12.70 3.38 13.31 39.80 9.53 5.56 7.14 5.99 12.75 1.52 12.70
41 0.500 0.133 0.453 1.478 0.375 0.237 0.291 0.189 0.476 0.050 0.469
12.70 3.38 11.51 37.54 9.53 6.02 7.39 4.80 12.09 1.27 11.91
Troubleshooting

50 0.625 0.164 0.660 1.962 0.500 0.268 0.354 0.293 0.626 0.080 0.625
15.88 4.17 16.76 49.83 12.70 6.81 8.99 7.44 15.90 2.03 15.88
Tools,

60 0.750 0.203 0.794 2.306 0.625 0.303 0.401 0.353 0.733 0.094 0.750
19.05 5.16 20.17 58.57 15.88 7.70 10.19 8.97 18.62 2.39 19.05
80 1.000 0.257 1.016 3.142 0.750 0.424 0.556 0.445 0.991 0.123 1.000
25.40 6.53 25.81 79.81 19.05 10.77 14.12 11.30 25.17 3.12 25.40
100 1.250 0.320 1.265 3.905 1.000 0.545 0.710 0.556 1.248 0.156 1.250
31.75 8.13 32.13 99.19 25.40 13.84 18.03 14.12 31.70 3.96 31.75
Information
Ordering
Conditions
Terms and

40 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Attachments
Standard Extended Pins
Attachments availabe for all chain types and platings. Extended leadtimes may apply.

Difference
Diamond
Description Diamond P/N Others P/N
Single Extended Pin E1 D1
Double Extended Pin E2 D3

Selection
Guide
D D D

L L L

Carbon
Steel
Single pin Double pin Single pin on double pitch chain
(double pin not shown)

& Moisture
Corrosion

Resistant
Carbon Steel Extended Pins Stainless Steel Extended Pins
ASME/ANSI Number Pitch D* L** ASME/ANSI Number Pitch D* L**

Maintenance
Reduced
in in in in in in
mm mm mm mm mm mm
35 0.375 0.141 0.375 35SS 0.375 0.141 0.375
9.53 3.58 9.53 9.53 3.58 9.53
40 0.500 0.156 0.383 40SS 0.500 0.156 0.383

Attachments
12.70 3.96 9.73 12.70 3.96 9.73
41 0.500 0.141 0.375 41SS 0.500 0.141 0.375
12.70 3.58 9.53 12.70 3.58 9.53
50 0.625 0.200 0.468 50SS 0.625 0.200 0.469
15.88 5.08 11.89 15.88 5.08 11.91
60 0.750 0.234 0.562 60SS 0.750 0.234 0.562
19.05 5.94 14.27 19.05 5.94 14.27
80 1.000 0.312 0.750 80SS 1.000 0.312 0.750

Application
Specific
25.40 7.92 19.05 25.40 7.92 19.05
100 1.250 0.375 0.937 C2040SS, C2042SS 1.000 0.156 0.375
31.75 9.53 23.80 25.40 3.96 9.53
120 1.500 0.437 1.125 C2050SS, C2052SS 1.250 0.200 0.469
38.10 11.10 28.58 31.75 5.08 11.91
140 1.750 0.500 1.312 C2060SS, C2062SS 1.500 0.234 0.562

Horsepower
44.45 12.70 33.32 38.10 5.94 14.27

Tables
160 2.000 0.562 1.500 C2080SS, C2082SS 2.000 0.312 0.750
50.80 14.27 38.10 50.80 7.92 19.05
C2040, C2042 1.000 0.156 0.375
25.40 3.96 9.53
C2050, C2052 1.250 0.200 0.468

Components
31.75 5.08 11.89
C2060H, C2062H 1.500 0.234 0.562
38.10 5.94 14.27 Chain
C2080H, C2082H 2.000 0.312 0.750
50.80 7.92 19.05
C2100H, C2102H 2.500 0.375 0.937
Troubleshooting

63.50 9.53 23.80

Tools,
Information
Ordering

*D dimension +/- 0.0005" (0.0127mm)

**L dimension +/- 0.010" (0.254mm)
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 41

 Diamond
Chain

Application
Difference
Diamond

Specific Chain
Selection
Guide
Carbon
Steel
& Moisture
Corrosion
Resistant

Bindery Roller Chain

Maintenance
Reduced

Diamond Chain offers an extensive assortment of application specific chain. While often including
attachments, this section differs from the prior by being highly specialized to specific applications. If your
Attachments

specific attachment or application cannot be located in this section, refer back to the “attachment” section.
If still not available, please contact Diamond Chain technical support - we have an extensive library of chains
and attachments produced for specific applications, and our advanced laser fabrication cell allows fast, cost
effective production of custom product for new applications.
Application
Specific

Pg. 43 Pin Oven Chain (can production)

Pg. 44 Thermoforming Chain (plastic film conveyance)
Pg. 44 Serrated Top Chain (lumber industry)
Horsepower

Pg. 44 Bindery Chain (book binding)

Tables

Pg. 45 Oil Field Chain

Pg. 46 POWER CURVE® Chain (lateral deviaton/curving conveyor)
Pg. 46 TUF-FLEX® Chain (construction industry/applications with lateral displacement)
Components

Pg. 47 “Snap-on” Chain (applications involving snap-on flat plastic top plates)
Chain

Pg. 47 Coupling Chain

Pg. 49 Micropitch® Chain (precision applications including instrumentation, printers, etc.)
Pg. 50 Powersports Chain (ATVs, go-karts, motorcycles, snowmobiles)
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

42 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Special Application Chain
Pin Oven Chain
Pin oven chain is specially designed for two-piece metal decorating operations that can transfer and cure thousands of

Difference
Diamond
cans per minute. Diamond Chain offers two styles of pin oven chain that can be configured with various length pins and
tips, including custom designs.
Standard Pin Oven Chain uses ANSI #60 chain that has been modified for additional clearances to accomodate the
high temperature drying ovens and to allow more lubricant to enter the critical pin/bushing joint.
RING LEADER® O-Ring Pin Oven Chain is more commonly used in this application. The chain utilizes a special

Selection
Guide
compound o-ring that allows operation in temperatures up to 450°F (232°C) and that seals in lubrication while sealing
out contaminants. The resulting chain runs more smoothly and evenly with less vibration, providing less downtime,
fewer jams and more consistent production capacity. Note: chain does require periodic lubrication of the o-ring surface.
Also, be certain to remove any wire cleaning brushings from the line such that the o-ring surface does not become
inadvertantly damaged.

Carbon
Steel
The pins on standard and O-ring chain are built into the linkplate itself - not as an “add on” attachment. The default
material for the pins is a medium carbon through-hardened steel such that if an obstruction is encountered in
application the pin will “bend”. In that scenario, the pins can be straightened back to their original position in seconds.
Case-hardened low carbon steel is also option, resulting in pins that “break away” when contacted by an obstruction.

& Moisture
Corrosion

Resistant
Stainless steel pins are also available.
Pin Extensions & Tips. Because of the variability in applications, Diamond Chain offers numerous tips and pin
extensions. The most common is a spring-loaded pin tip assembed with a side plate to end-of-tip dimension of seven
inches (178mm). The table below shows the most common tips; if the desired configuration is not listed, Diamond Chain

Maintenance
can easily create custom components for the specific application. The tips can be manufactured from steel, aluminum,

Reduced
heat stabilized nylon or high temperature PEEK™ (type 8, 9 and 10). Note that original pin tips 1-3 and 5-6 have been
discontinued.

4 7 8 9 10 11 12 13

Attachments
Application
Specific
Horsepower
Tables
Components
Chain

Pin Tip 4 7 8 9 10 11 12 13
in in in in in in in in
Troubleshooting

Dimension
mm mm mm mm mm mm mm mm
D 0.468 0.875 0.820 0.950 0.700 1.260 1.260 0.820
Tools,

11.89 22.23 20.83 24.13 17.78 32.00 32.00 20.83

H 0.350 1.000 1.000 0.990 0.990 5.950 3.340 2.490
8.89 25.40 25.40 25.15 25.15 151.13 84.84 63.25
R n/a 45 deg. 0.125 0.840 0.060 0.060 0.060 0.125
- 45 deg. 3.18 21.34 1.52 1.52 1.52 3.18
Information
Ordering

Ordering Instructions. Specify standard or XLO O-Ring, type of pin material (bendable, breakable, or stainless), type
of tip configuration, and extension from the centerline of the chain to the end of the pin including the tip.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 43

 Diamond
Chain

Special Application Chain

Thermoforming, Serrated Top and Bindery Chain
Thermoforming (Plastic Feeder) Chain
Difference
Diamond

Thermforming chains are designed for thermforming applications such as those used in creating polystyrene plates,
blister packs and other plastic items. These chains feature precise, pointed link plates combined with extended pins or
straight attachments (for extra rigidity) which make them ideal for conveying plastic film into thermoforming operations.
Length matching recommended.
Selection
Guide

Note: because of the configured application-specific nature, thermoforming chain is made-to-order.

Type 1A Type 1B
.383
.500 .449
Carbon
Steel

.500 .383 .500

Type 2 Type 3 .625 .463

.500
& Moisture
Corrosion
Resistant

.50 .895
Maintenance

Serrated Top Chain

Reduced

Serrated top chains are designed for lumber industry applications such as edge finishing. This chain features specially
designed link plates to maximize grip while minimizing wood damage. Diamond Serrated Top chain offers superior
performance, longer service life and reduced downtime due to elongation and fatigue failures. Single and multiple strand
versions available.
Attachments

Note: this chain is made-to-order to best accomodate the specific application operating conditions (frequency and
depth of shock loading along with abrasion, temperature and humidity factors).
.063
Application
Specific

2.344
.686 .125
.250 1.153 1.158
.943
.625
1.000

.125
TYP. BOTH SIDES
Horsepower
Tables

Bindery Chain
Bindery chain is specifically designed for long life and smooth operation in the book binding industry. The #40 base
Components

chain with specialized attachments are used in saddle binding machinery to convey sorted and collated book pages
for stitching and trimming. The specific book’s size is easily accomodated by inserting the user’s attachments into the
Chain

square holes of the “saddle lug.”

Note: this chain is made-to-order.
Troubleshooting

LENGTH
WIDTH
Diamond Pitch Length Height Width
Tools,

Bindery Type
in in in in
mm mm mm mm
HEIGHT
1 0.500 0.988 1.354 0.858
12.70 25.10 34.39 21.79
2 0.500 0.990 1.310 0.819
Information
Ordering

12.70 25.15 33.27 20.80

PITCH
Conditions
Terms and

44 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Special Application Chain
Oil Field Chain American
Petroleum

Roller chains used in the oil and natural gas industries are subjected to some of the greatest loads and Institute

Difference
Diamond
harshest environments. These conditions are far more severe than usually found in industrial applications.
These “Oil Field” chains can be either single strand or multiple strand and are typically constructed using
Heavy Series components. Multiple strand chain with press-fit centerplates are recommended for use in 7F-0003

heavy-duty applications requiring additional fatigue strength.

Diamond Oil Field chains are produced with the same attention to detail that goes into all Diamond products,

Selection
Guide
but additionally have been subjected to the most up to date API (American Petroleum Institute) Specification
7F performance testing.
All Diamond Standard Series chain sizes 40 and above (except 41) and all Diamond Heavy Series chains meet
API requirements. It is highly recommended that multiple strand chains with press fit center plates be used in
oil field applications.

Carbon
Steel
Additionally, Diamond Chain produces a narrow width 1-1/2" pitch roller chain and a 2-1/2" pitch roller chain
with larger pin diameter - listed below - for use in older rigs. These chains do not fall under the ASME/ANSI
standards and therefore are not covered by API.

& Moisture
Corrosion

Resistant
Single Strand Multiple Strand (-X suffix)

CHAIN WIDTH, ROLLER CHAIN WIDTH,

RIVETED (R) WIDTH COTTERED (C)
CHAIN WIDTH,

Maintenance
COTTERED (C)

Reduced
ROLLER DIAMETER PITCH CHAIN WIDTH, CENTER TO
RIVETED (R) CENTER (K)

Attachments
Diamond Other Pitch Roller Roller Pin Link Plate C R K Avg. Avg. Tensile
Number ID Width Diameter Diameter Thickness Weight Strength†
in in in in in in in in lbs/ft lbs
ROLLER LINK mm mm mm PIN LINK mm mm mm mm mm kg/m kg
HEIGHT (H) HEIGHT (E)
472 1.500 0.750 0.875 0.437 0.187 1.930 1.800 - 3.410 34,000

Application
38.10 19.05 22.23 11.10 4.75 49.02 45.72 - 5.07 15,422

Specific
472-2 1.500 0.750 0.875 0.437 0.187 3.450 3.300 1.550 6.760 68,000
38.10 19.05 22.23 11.10 4.75 87.63 83.82 39.37 10.06 30,844
472-3 1.500 0.750 0.875 0.437 0.187 5.000 4.850 1.550 10.080 102,000
38.10 19.05 22.23 11.10 4.75 127.00 123.19 39.37 15.00 46,266
472-4 1.500 0.750 0.875 0.437 0.187 6.550 6.410 1.550 13.400 136,000
38.10 19.05 22.23 11.10 4.75 166.37 162.81 39.37 19.94 61,689

Horsepower
264 64S 2.500 1.500 1.562 0.875 0.375 3.710 3.390 - 13.680 148,500

Tables
63.50 38.10 39.67 22.23 9.53 94.23 86.11 - 20.36 67,358
264-3 64S-3 2.500 1.500 1.562 0.875 0.375 9.880 9.560 3.083 40.920 445,500
63.50 38.10 39.67 22.23 9.53 250.95 242.82 78.31 60.90 202,075

Components
Chain
Troubleshooting
Tools,
Information
Ordering

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 45

 Diamond
Chain

Special Application Chain

Additional Clearance Chain
Diamond Series chain offers two solutions designed specifically for lateral deviations that standard chains can't support.
Difference
Diamond

POWER CURVE® Chain

Designed for applications involving lateral turns, POWER-CURVE chain is manufactured using a pin that is smaller in
diameter while slightly longer than what is used in the Standard Series version. This design allows for extra clearance
Selection

between the pin and the bushing and in the overall chain width as well
Guide

ROLLER DIAMETER PIN DIAMETER

Carbon
Steel

ROLLER WIDTH, ROLLER WIDTH,

PITCH COTTERED (C)
RIVETED (R) MINIMUM MINIMUM
CURVE RADIUS CURVE RADIUS
ROLLER WIDTH
& Moisture
Corrosion
Resistant
Maintenance

Diamond Pitch Roller Roller Pin Link Plate C R Min. Avg. Avg. Tensile
Reduced

Number Width Diameter Diameter Thickness Radius Weight Strength†

in in in in in in in in lbs/ft lbs
mm mm mm mm mm mm mm mm kg/m kg
40LG 0.500 0.313 0.312 0.136 0.060 0.770 0.690 14.000 0.390 2,400
12.70 7.94 7.92 3.45 1.52 19.56 17.53 355.60 0.58 1,089
50LG 0.625 0.375 0.400 0.172 0.080 0.900 0.860 16.000 0.660 4,600
Attachments

15.88 9.53 10.16 4.37 2.03 22.86 21.84 406.40 0.98 2,087
60LG 0.750 0.500 0.469 0.200 0.094 1.140 1.070 22.000 0.940 6,100
19.05 12.70 11.91 5.08 2.39 28.96 27.18 558.80 1.40 2,767
80LG 1.000 0.625 0.625 0.281 0.125 1.470 1.350 36.000 1.600 11,500
25.40 15.88 15.88 7.14 3.18 37.34 34.29 914.40 2.38 5,216
Application
Specific

TUF-FLEX® Chain
TUF-FLEX chain is designed to handle shaft or sprocket misalignment rather than a lateral turn. These chains can
handle up to four inches (101mm) of lateral displacement in every four feet (1.2m) of chain length and up to eight
degrees of axial twist. The special design provides extra durability and unusual flexibility to meet the strenuous
demands of heavy duty construction machinery.
Horsepower
Tables

LATERAL DISPLACEMENT (4 INCHES IN 4 FEET)

ROLLER WIDTH, ROLLER ROLLER WIDTH,

RIVETED (R) COTTERED (C)
WIDTH
Components

ROLLER DIAMETER
Chain

PITCH
Troubleshooting

Diamond Pitch Roller Roller Pin Link Plate C R Avg. Avg. Tensile
Number Width Diameter Diameter Thickness Weight Strength†
Tools,

in in in in in in in lbs/ft lbs
mm mm mm mm mm mm mm kg/m kg
120-C 1.500 1.000 0.875 0.437 0.187 2.160 2.020 3.690 34,000
38.10 25.40 22.23 11.10 4.75 54.86 51.31 5.49 15,422
140-C 1.750 1.000 1.000 0.500 0.219 2.330 2.160 5.000 46,000
44.45 25.40 25.40 12.70 5.56 59.18 54.86 7.44 20,865
Information
Ordering

160-HC 2.000 1.250 1.125 0.562 0.281 2.860 2.680 7.090 70,000
50.80 31.75 28.58 14.27 7.14 72.64 68.07 10.55 31,751
200-C 2.500 1.500 1.562 0.781 0.312 3.450 3.140 10.650 95,000
63.50 38.10 39.67 19.84 7.92 87.63 79.76 15.85 43,091

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
Conditions

1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Terms and

46 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Special Application Chain
“Snap-On Top Plate” Chain
“Snap-on” chains are designed with specially extended pins to retain plastic “snap-on” flat top plates. Diamond Chain

Difference
Diamond
offers chains for both straight-running and side flexing applications. These chains can be used with standard ASME/
ANSI 40 or 60 sprockets, and are available in both carbon steel and stainless steel.
Note: Uses industry standard flat top plates sold separately

Side-Flexing “Snap-On Top Plate” Chain

Selection
Guide
PIN DIAMETER

ROLLER A
DIAMETER

ROLLER WIDTH B

Carbon
Steel
MIN. LATERAL RADIUS

& Moisture
Corrosion

Resistant
PITCH

Diamond Pitch Roller Roller Pin Link Plate A B Min. Avg. Avg. Tensile
Number Width Diameter Diameter Thickness Radius Weight Strength†
in in in in in in in in lbs/ft lbs

Maintenance
mm mm mm mm mm mm mm mm kg/m kg

Reduced
Carbon Steel
43SB 0.500 0.313 0.312 0.136 0.060 0.056 0.588 14.000 0.400 2,400
12.70 7.94 7.92 3.45 1.52 1.42 14.94 355.60 0.60 1,089
63SB 0.750 0.500 0.469 0.200 0.094 0.120 0.900 22.000 0.940 6,100
19.05 12.70 11.91 5.08 2.39 3.05 22.86 558.80 1.40 2,767
Stainless Steel

Attachments
43SB SS 0.500 0.313 0.312 0.136 0.060 0.056 0.588 14.000 0.400 2,400
12.70 7.94 7.92 3.45 1.52 1.42 14.94 355.60 0.60 1,089
63SB SS 0.750 0.500 0.469 0.200 0.094 0.120 0.900 22.000 0.940 6,100
19.05 12.70 11.91 5.08 2.39 3.05 22.86 558.80 1.40 2,767

Application
Straight Running “Snap-On Top Plate” Chain

Specific
ROLLER PIN DIAMETER A
DIAMETER

ROLLER WIDTH B

Horsepower
Tables
A

Components
Chain
PITCH

Diamond Pitch Roller Roller Pin Link Plate A B Avg. Avg. Tensile
Number Width Diameter Diameter Thickness Weight Strength†
in in in in in in in lbs/ft lbs
Troubleshooting

mm mm mm mm mm mm mm kg/m kg
Tools,

Carbon Steel
43 0.500 0.313 0.312 0.156 0.060 0.065 0.568 0.440 4,000
12.70 7.94 7.92 3.96 1.52 1.65 14.43 0.65 1,814
63 0.750 0.500 0.469 0.234 0.094 0.105 0.898 1.010 8,500
19.05 12.70 11.91 5.94 2.39 2.67 22.81 1.50 3,856
Stainless Steel
Information
Ordering

43 SS 0.500 0.313 0.312 0.156 0.060 0.065 0.568 0.440 4,000

12.70 7.94 7.92 3.96 1.52 1.65 14.43 0.65 1,814
63 SS 0.750 0.500 0.469 0.234 0.094 0.105 0.898 1.010 8,500
19.05 12.70 11.91 5.94 2.39 2.67 22.81 1.50 3,856

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
Conditions

1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 47

 Diamond
Chain

Special Application Chain

Coupling Chain
Coupling chain is specifically designed to work in concert with drive couplings to provide near-seamless power
Difference
Diamond

transmission. The chain's file-hard components develop a high-capacity unit durable enough to deliver long after other
chains fail. Chain is double-strand press fit construction to exact length. Exclusive single coupling bolt facilitates easier
assembly/disassembly.
LENGTH IN PITCHES
Selection
Guide

CHAIN WIDTH, CENTER TO CHAIN WIDTH,

RIVETED (R) CENTER (K) COTTERED (C)

ROLLER DIAMETER PITCH

Carbon
Steel

Diamond Pitch Roller Roller C R K Avg. Length

& Moisture
Corrosion
Resistant

Number Width Diameter Weight

in in in in in in lbs/ft
mm mm mm mm mm mm kg/m Pitches
D4012 0.500 0.312 0.312 1.297 1.240 0.566 0.410 12
12.70 7.92 7.92 32.94 31.50 14.38 0.61
D4016 0.500 0.312 0.312 1.297 1.240 0.566 0.550
Maintenance

16
Reduced

12.70 7.92 7.92 32.94 31.50 14.38 0.82

D5016 0.625 0.375 0.400 1.592 1.550 0.713 1.120 16
15.88 9.53 7.11 40.44 39.37 18.11 1.67
D5018 0.625 0.375 0.400 1.592 1.550 0.713 1.260 18
15.88 9.53 8.43 40.44 39.37 18.11 1.88
D6018 0.750 0.500 0.469 1.980 1.940 0.897 2.160 18
Attachments

19.05 12.70 11.23 50.29 49.28 22.78 3.21

D6020 0.750 0.500 0.469 1.980 1.940 0.897 2.400 20
19.05 12.70 13.51 50.29 49.28 22.78 3.57
D6022 0.750 0.500 0.469 1.980 1.940 0.897 2.640 22
19.05 12.70 15.75 50.29 49.28 22.78 3.93
D8018 1.000 0.625 0.625 2.567 2.470 1.153 5.000 18
25.40 15.88 13.51 65.20 62.74 29.29 7.44
Application

D8020 1.000 0.625 0.625 2.567 2.470 1.153 5.560

Specific

20
25.40 15.88 15.75 65.20 62.74 29.29 8.27
D10018 1.250 0.750 0.750 3.162 3.020 1.408 9.240 18
31.75 19.05 13.51 80.31 76.71 35.76 13.75
D10020 1.250 0.750 0.750 3.162 3.020 1.408 10.300 20
31.75 19.05 15.75 80.31 76.71 35.76 15.33
Horsepower

D12018 1.500 1.000 0.875 3.977 3.790 1.789 16.200 18

38.10 25.40 13.51 101.02 96.27 45.44 24.11
Tables

D12022 1.500 1.000 0.875 3.977 3.790 1.789 19.800 22

38.10 25.40 15.75 101.02 96.27 45.44 29.47
Components
Chain
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

48 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Special Application Chain
Micropitch Chain
Micropitch chain is constructed entirely from non-magnetic 300 series stainless steel and offers a large joint bearing

Difference
Diamond
area, making it well suited for precision applications requiring positive and negative articulation.
Micropitch chain is applied on the basis of maximum working loads imposed in the drive. For chain speed less than 100
feet (30.5 meters) per minute, maximum working load should not exceed 20 pounds (9.07 kg). For speeds greater than
100 feet (30.5 meters) per minute, the maximum working load should be reduced depending upon the specifics of the
drive. As a general rule, working loads should not exceed 12 pounds (5.4 kg) for chain speed greater than 500 feet (152

Selection
Guide
meters) per minute.

Carbon
CHAIN WIDTH, BUSHING CONNECTING LINK

Steel
RIVETED (R) WIDTH WIDTH (CL)

BUSHING DIAMETER PITCH

& Moisture
Corrosion

Resistant
ROLLER LINK HEIGHT (H)

Diamond Pitch Bushing Bushing Pin Link Plate H CL R Avg. Tensile

Maintenance
Number Width Diameter Diameter Thickness Strength†

Reduced
in in in in in in in in lbs
mm mm mm mm mm mm mm mm kg
47SS 0.147 0.072 0.090 0.062 0.015 0.138 0.250 0.220 180
3.73 1.83 2.29 1.57 0.38 3.51 6.35 5.59 82

Attachments
Application
Specific
Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering

† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 49

 Diamond
Chain

Special Application Chain

Powersports Chain
Diamond Series Powersports chains are designed to meet the individual needs of the powersports enthusiast for ATVs,
Difference
Diamond

go-karts, motorcycles and snowmobiles.

Multi-Service chains offer Diamond’s superior manufacturing parts processing technology which includes material
selection, precise component fabrication, exacting heat treatment and assembly techniques.
RING LEADER® O-ring chains are top of the line chains offering up to four times the service life of regular chains. O-ring
lubrication system seals in lubricant and seals out foreign contaminants.
Selection
Guide

Additionally, some chains are available with a brass or nickel plating for an enhanced appearance.

Diamond Plating Pitch Roller Roller Pin Link Plate C R K Av.g. Avg. Tensile
Number Width Diameter Diameter Thickness Weight Strength†
Carbon

in in in in in in in in in lbs/ft lbs
Steel

mm mm mm mm mm mm mm mm mm kg/m kg
Multi-Service
35MS – 0.375 0.188 *.200 0.141 0.050 0.560 0.500 – 0.210 2,000
9.53 4.76 5.08 3.58 1.27 14.22 12.70 – 0.31 907
35MS BR Brass 0.375 0.188 *.200 0.141 0.050 0.560 0.500 – 0.210 2,000
& Moisture
Corrosion
Resistant

9.53 4.76 5.08 3.58 1.27 14.22 12.70 – 0.31 907

35-2MS – 0.375 0.188 *.200 0.141 0.050 0.960 0.900 0.399 0.450 4,200
9.53 4.76 5.08 3.58 1.27 24.38 22.86 10.13 0.67 1,905
35-3** – 0.375 0.188 *.200 0.141 0.050 1.360 1.310 0.399 0.770 6,300
9.53 4.76 5.08 3.58 1.27 34.54 33.27 10.13 1.15 2,858
Maintenance

41MS – 0.500 0.250 0.306 0.141 0.050 0.650 0.570 – 0.260 2,400
Reduced

12.70 6.35 7.77 3.58 1.27 16.51 14.48 – 0.39 1,089

40MS – 0.500 0.313 0.312 0.156 0.060 0.720 0.670 – 0.410 4,000
12.70 7.94 7.92 3.96 1.52 18.29 17.02 – 0.61 1,814
428MS – 0.500 0.313 0.335 0.174 0.060 0.720 0.670 – 0.430 4,200
12.70 7.94 8.51 4.42 1.52 18.29 17.02 – 0.64 1,905
428-2 – 0.500 0.313 0.335 0.174 0.060 1.290 1.240 0.566 0.880 8,400
Attachments

12.70 7.94 8.51 4.42 1.52 32.77 31.50 14.38 1.31 3,810
520MS – 0.625 0.250 0.400 0.200 0.080 0.770 0.710 – 0.590 6,600
15.88 6.35 10.16 5.08 2.03 19.56 18.03 – 0.88 2,994
520H Brass 0.625 0.250 0.400 0.214 0.094 0.800 0.740 – 0.820 9,300
15.88 6.35 10.16 5.44 2.39 20.32 18.80 – 1.22 4,218
530MS – 0.625 0.375 0.400 0.200 0.080 0.890 0.830 – 0.680 6,600
Application

15.88 9.53 10.16 5.08 2.03 22.61 21.08 – 1.01 2,994

Specific

530ENP Nickel 0.625 0.375 0.400 0.200 0.080 0.890 0.830 – 0.690 6,600
15.88 9.53 10.16 5.08 2.03 22.61 21.08 – 1.03 2,994
530BP Brass 0.625 0.375 0.400 0.200 0.080 0.890 0.830 – 0.680 6,600
15.88 9.53 10.16 5.08 2.03 22.61 21.08 – 1.01 2,994
630MS – 0.750 0.375 0.469 0.234 0.094 0.980 0.910 – 0.910 8,500
19.05 9.53 11.91 5.94 2.39 24.89 23.11 – 1.35 3,856
Horsepower

630BP Brass 0.750 0.375 0.469 0.234 0.094 0.980 0.910 – 0.910 8,500
Tables

19.05 9.53 11.91 5.94 2.39 24.89 23.11 – 1.35 3,856

XLO O-Ring
520XLO – 0.625 0.250 0.400 0.214 0.094 0.890 0.830 – 0.850 9,300
15.88 6.35 10.16 5.44 2.39 22.61 21.08 – 1.26 4,218
Components

520XLO NI Nickel 0.625 0.250 0.400 0.214 0.094 0.890 0.830 – 0.860 9,300
Chain

15.88 6.35 10.16 5.44 2.39 22.61 21.08 – 1.28 4,218

520XLO BP Brass 0.625 0.250 0.400 0.214 0.094 0.890 0.830 – 0.860 9,300
15.88 6.35 10.16 5.44 2.39 22.61 21.08 – 1.28 4,218
530XLO – 0.625 0.375 0.400 0.214 0.094 1.020 0.960 – 0.930 9,300
15.88 9.53 10.16 5.44 2.39 25.91 24.38 – 1.38 4,218
Troubleshooting

530XLO BP Brass 0.625 0.375 0.400 0.214 0.094 1.020 0.960 – 0.930 9,300
15.88 9.53 10.16 5.44 2.39 25.91 24.38 – 1.38 4,218
Tools,
Information
Ordering

* Chain is rollerless. Dimension shown is bushing diameter.

** Chain uses oval contour sideplates and is supplied riveted endless.
† Diamond Chain Company uses average tensile strength as it is a more appropriate value for strength and load calculations. Working load should not exceed
1/6th tensile strength under typical conditions when using a press fit connecting link or 1/9th tensile strength when using a slip fit connecting link or offset link.
Conditions
Terms and

50 1-800 US CHAIN (872-4246) | diamondchain.com

 diamondchain.com
|
1-800 US CHAIN (872-4246)
This page intentionally left blank

51
Terms and Ordering Tools, Chain Horsepower Application Attachments Reduced Corrosion Carbon Selection Diamond Diamond
Conditions Information Troubleshooting Components Tables Specific Maintenance & Moisture Steel Guide Difference Chain
Resistant
 Diamond
Chain

Horsepower
Difference
Diamond

Tables
Selection
Guide
Carbon
Steel
& Moisture
Corrosion
Resistant
Maintenance
Reduced
Attachments

The horsepower rating tables found on the following pages cover standard series, heavy series, double
pitch, RING LEADER O-Ring and EHT roller chains.

This horsepower table section is divided as follows:

Application
Specific

Pg. 53-66 Standard series chain

Pg. 67-75 Heavy series chain
Pg. 76-79 Double pitch chain
Horsepower

Pg. 80-83 O-Ring chain

Tables

The power transmission capacity rating listed in the following tables are based upon these conditions:

1. A service factor of one

Components

2. Chain length of 100 pitches

Chain

3. The use of recommended methods of lubrication

4. A two-sprocket drive, properly aligned and mounted on parallel horizontal shafts.
5. A non-abrasive environment
Troubleshooting

Under these conditions, a service life of approximately 15,000 hours can be expected.
Tools,
Information
Ordering
Conditions
Terms and

52 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
#25 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 50 100 300 365 500 700 900 1,200 1,500 1,800 2,100 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 7,000 8,000 9,000 10,000 11,000 12,000
11 0.03 0.06 0.19 0.22 0.30 0.42 0.53 0.70 0.87 1.03 1.20 1.42 1.69 1.69 1.38 1.16 0.99 0.86 0.75 0.60 0.49 0.41 0.35 0.30 0.27
12 0.04 0.07 0.20 0.24 0.33 0.46 0.58 0.76 0.95 1.13 1.31 1.55 1.84 1.92 1.57 1.32 1.12 0.97 0.86 0.68 0.56 0.47 0.40 0.34 0.30
13 0.04 0.08 0.22 0.26 0.36 0.49 0.63 0.83 1.03 1.22 1.42 1.67 1.99 2.17 1.77 1.49 1.27 1.10 0.96 0.77 0.63 0.53 0.45 0.39 0.34
14 0.04 0.08 0.24 0.28 0.38 0.53 0.68 0.89 1.10 1.32 1.52 1.80 2.15 2.42 1.98 1.66 1.42 1.23 1.08 0.86 0.70 0.59 0.50 0.43 0.38

Selection
Guide
15 0.05 0.09 0.25 0.30 0.41 0.57 0.72 0.95 1.18 1.41 1.63 1.93 2.30 2.67 2.20 1.84 1.57 1.36 1.20 0.95 0.78 0.65 0.56 0.48 0.42
16 0.05 0.09 0.27 0.32 0.44 0.61 0.77 1.02 1.26 1.50 1.74 2.06 2.45 2.85 2.42 2.03 1.73 1.50 1.32 1.05 0.86 0.72 0.61 0.53 0.47
17 0.05 0.10 0.29 0.35 0.47 0.64 0.82 1.08 1.34 1.60 1.85 2.19 2.61 3.02 2.65 2.22 1.90 1.64 1.44 1.14 0.94 0.79 0.67 0.58 0.51
18 0.05 0.11 0.30 0.37 0.49 0.68 0.87 1.15 1.42 1.69 1.96 2.32 2.76 3.20 2.89 2.42 2.07 1.79 1.57 1.25 1.02 0.86 0.73 0.63 0.56

19 0.06 0.11 0.32 0.39 0.52 0.72 0.92 1.21 1.50 1.78 2.07 2.45 2.91 3.38 3.13 2.62 2.24 1.94 1.70 1.35 1.11 0.93 0.79 0.69

Carbon
Steel
20 0.06 0.12 0.34 0.41 0.55 0.76 0.97 1.27 1.58 1.88 2.18 2.58 3.07 3.56 3.38 2.83 2.42 2.10 1.84 1.46 1.20 1.00 0.86 0.74
21 0.06 0.12 0.35 0.43 0.58 0.80 1.01 1.34 1.66 1.97 2.29 2.70 3.22 3.74 3.64 3.05 2.60 2.26 1.98 1.57 1.29 1.08 0.92
22 0.07 0.13 0.37 0.45 0.60 0.83 1.06 1.40 1.73 2.07 2.40 2.83 3.37 3.91 3.90 3.27 2.79 2.42 2.12 1.69 1.38 1.16 0.99

23 0.07 0.13 0.39 0.47 0.63 0.87 1.11 1.46 1.81 2.16 2.51 2.96 3.53 4.09 4.17 3.50 2.98 2.59 2.27 1.80 1.47 1.24 1.04
24 0.07 0.14 0.40 0.49 0.66 0.91 1.16 1.53 1.89 2.25 2.61 3.09 3.68 4.27 4.45 3.73 3.18 2.76 2.42 1.92 1.57 1.32 0.22

& Moisture
Corrosion

Resistant
25 0.08 0.15 0.42 0.51 0.69 0.95 1.21 1.59 1.97 2.35 2.72 3.22 3.84 4.45 4.73 3.96 3.38 2.93 2.57 2.04 1.67 1.40
26 0.08 0.15 0.44 0.53 0.71 0.99 1.26 1.65 2.05 2.44 2.83 3.35 3.99 4.62 5.01 4.20 3.59 3.11 2.73 2.17 1.77 1.49

28 0.08 0.16 0.47 0.57 0.77 1.06 1.35 1.78 2.21 2.63 3.05 3.61 4.30 4.98 5.60 4.70 4.01 3.47 3.05 2.42 1.98
30 0.09 0.18 0.50 0.61 0.82 1.14 1.45 1.91 2.37 2.82 3.27 3.86 4.60 5.34 6.07 5.21 4.45 3.85 3.38 2.68 1.98
32 0.10 0.19 0.54 0.65 0.88 1.21 1.55 2.04 2.52 3.01 3.49 4.12 4.91 5.69 6.47 5.74 4.90 4.25 3.73 2.96 0.35

Maintenance
Reduced
35 0.11 0.21 0.59 0.71 0.96 1.33 1.69 2.23 2.76 3.29 3.81 4.51 5.37 6.23 7.08 6.56 5.60 4.86 4.26 2.76

40 0.12 0.23 0.67 0.81 1.10 1.52 1.93 2.55 3.15 3.76 4.36 5.15 6.14 7.11 8.09 8.02 6.85 5.93 4.91
45 0.14 0.26 0.76 0.91 1.24 1.71 2.17 2.86 3.55 4.23 4.90 5.79 6.90 8.00 9.10 9.57 8.17 5.23 1.38
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:

Attachments
2 strands: 1.7x
3 strands: 2.5x

#25 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 50 100 300 365 500 700 900 1,200 1,500 1,800 2,100 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 7,000 8,000 9,000 10,000 11,000 12,000
11 0.02 0.04 0.14 0.16 0.22 0.31 0.40 0.52 0.65 0.77 0.89 1.06 1.26 1.26 1.03 0.87 0.74 0.64 0.56 0.45 0.37 0.31 0.26 0.22 0.20
12 0.03 0.05 0.15 0.18 0.25 0.34 0.43 0.57 0.71 0.84 0.98 1.16 1.37 1.43 1.17 0.98 0.84 0.72 0.64 0.51 0.42 0.35 0.30 0.25 0.22
13 0.03 0.06 0.16 0.19 0.27 0.37 0.47 0.62 0.77 0.91 1.06 1.25 1.48 1.62 1.32 1.11 0.95 0.82 0.72 0.57 0.47 0.40 0.34 0.29 0.25
14 0.03 0.06 0.18 0.21 0.28 0.40 0.51 0.66 0.82 0.98 1.13 1.34 1.60 1.80 1.48 1.24 1.06 0.92 0.81 0.64 0.52 0.44 0.37 0.32 0.28

Horsepower
Tables
15 0.04 0.07 0.19 0.22 0.31 0.43 0.54 0.71 0.88 1.05 1.22 1.44 1.72 1.99 1.64 1.37 1.17 1.01 0.89 0.71 0.58 0.48 0.42 0.36 0.31
16 0.04 0.07 0.20 0.24 0.33 0.45 0.57 0.76 0.94 1.12 1.30 1.54 1.83 2.13 1.80 1.51 1.29 1.12 0.98 0.78 0.64 0.54 0.45 0.40 0.35
17 0.04 0.07 0.22 0.26 0.35 0.48 0.61 0.81 1.00 1.19 1.38 1.63 1.95 2.25 1.98 1.66 1.42 1.22 1.07 0.85 0.70 0.59 0.50 0.43 0.38
18 0.04 0.08 0.22 0.28 0.37 0.51 0.65 0.86 1.06 1.26 1.46 1.73 2.06 2.39 2.16 1.80 1.54 1.33 1.17 0.93 0.76 0.64 0.54 0.47 0.42

19 0.04 0.08 0.24 0.29 0.39 0.54 0.69 0.90 1.12 1.33 1.54 1.83 2.17 2.52 2.33 1.95 1.67 1.45 1.27 1.01 0.83 0.69 0.59 0.51

Components
20 0.04 0.09 0.25 0.31 0.41 0.57 0.72 0.95 1.18 1.40 1.63 1.92 2.29 2.65 2.52 2.11 1.80 1.57 1.37 1.09 0.89 0.75 0.64 0.55

Chain
21 0.04 0.09 0.26 0.32 0.43 0.60 0.75 1.00 1.24 1.47 1.71 2.01 2.40 2.79 2.71 2.27 1.94 1.69 1.48 1.17 0.96 0.81 0.69
22 0.05 0.10 0.28 0.34 0.45 0.62 0.79 1.04 1.29 1.54 1.79 2.11 2.51 2.92 2.91 2.44 2.08 1.80 1.58 1.26 1.03 0.87 0.74

23 0.05 0.10 0.29 0.35 0.47 0.65 0.83 1.09 1.35 1.61 1.87 2.21 2.63 3.05 3.11 2.61 2.22 1.93 1.69 1.34 1.10 0.92 0.78
24 0.05 0.10 0.30 0.37 0.49 0.68 0.87 1.14 1.41 1.68 1.95 2.30 2.74 3.18 3.32 2.78 2.37 2.06 1.80 1.43 1.17 0.98 0.16
Troubleshooting

25 0.06 0.11 0.31 0.38 0.51 0.71 0.90 1.19 1.47 1.75 2.03 2.40 2.86 3.32 3.53 2.95 2.52 2.18 1.92 1.52 1.25 1.04
Tools,

26 0.06 0.11 0.33 0.40 0.53 0.74 0.94 1.23 1.53 1.82 2.11 2.50 2.98 3.45 3.74 3.13 2.68 2.32 2.04 1.62 1.32 1.11

28 0.06 0.12 0.35 0.43 0.57 0.79 1.01 1.33 1.65 1.96 2.27 2.69 3.21 3.71 4.18 3.50 2.99 2.59 2.27 1.80 1.48
30 0.07 0.13 0.37 0.45 0.61 0.85 1.08 1.42 1.77 2.10 2.44 2.88 3.43 3.98 4.53 3.89 3.32 2.87 2.52 2.00 1.48
32 0.07 0.14 0.40 0.48 0.66 0.90 1.16 1.52 1.88 2.24 2.60 3.07 3.66 4.24 4.82 4.28 3.65 3.17 2.78 2.21 0.26
35 0.08 0.16 0.44 0.53 0.72 0.99 1.26 1.66 2.06 2.45 2.84 3.36 4.00 4.65 5.28 4.89 4.18 3.62 3.18 2.06
Information
Ordering

40 0.09 0.17 0.50 0.60 0.82 1.13 1.44 1.90 2.35 2.80 3.25 3.84 4.58 5.30 6.03 5.98 5.11 4.42 3.66
45 0.10 0.19 0.57 0.68 0.92 1.28 1.62 2.13 2.65 3.15 3.65 4.32 5.15 5.97 6.79 7.14 6.09 3.90 1.03
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
Conditions
Terms and

3 strands: 2.5x

diamondchain.com | 1-800 US CHAIN (872-4246) 53

 Diamond
Chain

Standard Series Horsepower Tables

#35 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 50 100 200 240 500 700 900 1,200 1,500 1,800 2,100 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 8,000 9,000 10,000
11 0.11 0.22 0.42 0.50 1.02 1.41 1.80 2.37 2.93 3.49 4.05 3.86 2.94 2.33 1.91 1.60 1.37 1.18 1.04 0.92 0.82 0.74 0.67 0.57 0.48
12 0.12 0.24 0.46 0.55 1.11 1.54 1.96 2.58 3.20 3.81 4.42 4.40 3.35 2.66 2.17 1.82 1.56 1.35 1.18 1.05 0.94 0.85 0.77 0.64 0.55
13 0.13 0.26 0.50 0.60 1.21 1.67 2.12 2.80 3.47 4.13 4.79 4.96 3.77 3.00 2.45 2.05 1.75 1.52 1.33 1.18 1.06 0.95 0.87 0.73 0.62
14 0.14 0.28 0.54 0.64 1.30 1.80 2.29 3.01 3.73 4.45 5.15 5.55 4.22 3.35 2.74 2.30 1.96 1.70 1.49 1.32 1.18 1.07 0.97 0.81 0.10
Selection
Guide

15 0.15 0.30 0.58 0.69 1.39 1.92 2.45 3.23 4.00 4.76 5.52 6.15 4.68 3.71 3.04 2.55 2.17 1.88 1.65 1.47 1.31 1.18 1.07 0.90

16 0.16 0.32 0.62 0.73 1.49 2.05 2.61 3.44 4.26 5.08 5.89 6.77 5.15 4.09 3.35 2.81 2.40 2.08 1.82 1.62 1.45 1.30 1.18 0.44
17 0.17 0.34 0.65 0.78 1.58 2.18 2.77 3.66 4.53 5.40 6.26 7.40 5.64 4.48 3.67 3.07 2.62 2.27 2.00 1.77 1.58 1.43 1.30
18 0.18 0.36 0.69 0.83 1.67 2.31 2.94 3.87 4.80 5.72 6.63 7.83 6.15 4.88 3.99 3.35 2.86 2.48 2.17 1.93 1.73 1.56 1.41
19 0.19 0.38 0.73 0.87 1.76 2.44 3.10 4.09 5.06 6.03 7.00 8.27 6.67 5.29 4.33 3.63 3.10 2.69 2.36 2.09 1.87 1.69 0.05
20 0.20 0.40 0.77 0.92 1.86 2.56 3.26 4.30 5.33 6.35 7.36 8.71 7.20 5.72 4.68 3.92 3.35 2.90 2.55 2.26 2.02 1.42
Carbon
Steel

21 0.21 0.42 0.81 0.96 1.95 2.69 3.43 4.52 5.60 6.67 7.73 9.14 7.75 6.15 5.03 4.22 3.60 3.12 2.74 2.43 2.17
22 0.22 0.44 0.85 1.01 2.04 2.82 3.59 4.73 5.86 6.99 8.10 9.58 8.31 6.59 5.40 4.52 3.86 3.35 2.94 2.61 1.42
23 0.23 0.46 0.89 1.06 2.14 2.95 3.75 4.95 6.13 7.30 8.47 10.01 8.88 7.05 5.77 4.83 4.13 3.58 3.14 2.79
24 0.24 0.48 0.92 1.10 2.23 3.08 3.92 5.16 6.40 7.62 8.84 10.45 9.47 7.51 6.15 5.15 4.40 3.81 3.35 2.04
25 0.25 0.50 0.96 1.15 2.32 3.21 4.08 5.38 6.66 7.94 9.20 10.88 10.07 7.99 6.54 5.48 4.68 4.05 3.56 0.12
& Moisture
Corrosion
Resistant

26 0.26 0.51 1.00 1.19 2.41 3.33 4.24 5.59 6.93 8.26 9.57 11.32 10.68 8.47 6.93 5.81 4.96 4.30 3.40
28 0.29 0.55 1.08 1.28 2.60 3.59 4.57 6.02 7.46 8.89 10.31 12.19 11.93 9.47 7.75 6.49 5.55 4.81
30 0.31 0.59 1.16 1.38 2.79 3.85 4.90 6.45 8.00 9.53 11.05 13.06 13.23 10.50 8.59 7.20 6.15 2.24
32 0.33 0.63 1.23 1.47 2.97 4.10 5.22 6.88 8.53 10.16 11.78 13.93 14.58 11.57 9.47 7.93 5.76
35 0.36 0.69 1.35 1.61 3.25 4.49 5.71 7.53 9.33 11.11 12.89 15.23 16.67 13.23 10.83 8.85 0.34
Maintenance
Reduced

40 0.41 0.79 1.54 1.84 3.71 5.13 6.53 8.61 10.66 12.70 14.73 17.41 20.37 16.17 11.04 0.34
45 0.46 0.89 1.73 2.07 4.18 5.77 7.35 9.68 11.99 14.29 16.57 19.59 23.33 15.56 3.11
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
Attachments

4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#35 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 50 100 200 240 500 700 900 1,200 1,500 1,800 2,100 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 8,000 9,000 10,000
11 0.08 0.16 0.31 0.37 0.76 1.05 1.34 1.77 2.18 2.60 3.02 2.88 2.19 1.74 1.42 1.19 1.02 0.88 0.78 0.69 0.61 0.55 0.50 0.43 0.36
12 0.09 0.18 0.34 0.41 0.83 1.15 1.46 1.92 2.39 2.84 3.30 3.28 2.50 1.98 1.62 1.36 1.16 1.01 0.88 0.78 0.70 0.63 0.57 0.48 0.41
13 0.10 0.19 0.37 0.45 0.90 1.25 1.58 2.09 2.59 3.08 3.57 3.70 2.81 2.24 1.83 1.53 1.30 1.13 0.99 0.88 0.79 0.71 0.65 0.54 0.46
14 0.10 0.21 0.40 0.48 0.97 1.34 1.71 2.24 2.78 3.32 3.84 4.14 3.15 2.50 2.04 1.72 1.46 1.27 1.11 0.98 0.88 0.80 0.72 0.60 0.07
Horsepower

15 0.11 0.22 0.43 0.51 1.04 1.43 1.83 2.41 2.98 3.55 4.12 4.59 3.49 2.77 2.27 1.90 1.62 1.40 1.23 1.10 0.98 0.88 0.80 0.67 0.00
Tables

16 0.12 0.24 0.46 0.54 1.11 1.53 1.95 2.57 3.18 3.79 4.39 5.05 3.84 3.05 2.50 2.10 1.79 1.55 1.36 1.21 1.08 0.97 0.88 0.33 0.00
17 0.13 0.25 0.48 0.58 1.18 1.63 2.07 2.73 3.38 4.03 4.67 5.52 4.21 3.34 2.74 2.29 1.95 1.69 1.49 1.32 1.18 1.07 0.97 0.00 0.00
18 0.13 0.27 0.51 0.62 1.25 1.72 2.19 2.89 3.58 4.27 4.94 5.84 4.59 3.64 2.98 2.50 2.13 1.85 1.62 1.44 1.29 1.16 1.05 0.00 0.00
19 0.14 0.28 0.54 0.65 1.31 1.82 2.31 3.05 3.77 4.50 5.22 6.17 4.97 3.94 3.23 2.71 2.31 2.01 1.76 1.56 1.39 1.26 0.04 0.00
20 0.15 0.30 0.57 0.69 1.39 1.91 2.43 3.21 3.97 4.74 5.49 6.50 5.37 4.27 3.49 2.92 2.50 2.16 1.90 1.69 1.51 1.06 0.00 0.00
Components
Chain

21 0.16 0.31 0.60 0.72 1.45 2.01 2.56 3.37 4.18 4.97 5.76 6.82 5.78 4.59 3.75 3.15 2.68 2.33 2.04 1.81 1.62 0.00 0.00
22 0.16 0.33 0.63 0.75 1.52 2.10 2.68 3.53 4.37 5.21 6.04 7.14 6.20 4.91 4.03 3.37 2.88 2.50 2.19 1.95 1.06 0.00 0.00
23 0.17 0.34 0.66 0.79 1.60 2.20 2.80 3.69 4.57 5.44 6.32 7.46 6.62 5.26 4.30 3.60 3.08 2.67 2.34 2.08 0.00 0.00 0.00
24 0.18 0.36 0.69 0.82 1.66 2.30 2.92 3.85 4.77 5.68 6.59 7.79 7.06 5.60 4.59 3.84 3.28 2.84 2.50 1.52 0.00 0.00 0.00
25 0.19 0.37 0.72 0.86 1.73 2.39 3.04 4.01 4.97 5.92 6.86 8.11 7.51 5.96 4.88 4.09 3.49 3.02 2.65 0.09 0.00 0.00
Troubleshooting

26 0.19 0.38 0.75 0.89 1.80 2.48 3.16 4.17 5.17 6.16 7.14 8.44 7.96 6.32 5.17 4.33 3.70 3.21 2.54 0.00 0.00 0.00
Tools,

28 0.22 0.41 0.81 0.95 1.94 2.68 3.41 4.49 5.56 6.63 7.69 9.09 8.90 7.06 5.78 4.84 4.14 3.59 0.00 0.00 0.00
30 0.23 0.44 0.87 1.03 2.08 2.87 3.65 4.81 5.97 7.11 8.24 9.74 9.87 7.83 6.41 5.37 4.59 1.67 0.00 0.00 0.00
32 0.25 0.47 0.92 1.10 2.21 3.06 3.89 5.13 6.36 7.58 8.78 10.39 10.87 8.63 7.06 5.91 4.30 0.00 0.00 0.00 0.00
35 0.27 0.51 1.01 1.20 2.42 3.35 4.26 5.62 6.96 8.28 9.61 11.36 12.43 9.87 8.08 6.60 0.25 0.00 0.00 0.00

40 0.31 0.59 1.15 1.37 2.77 3.83 4.87 6.42 7.95 9.47 10.98 12.98 15.19 12.06 8.23 0.25 0.00 0.00 0.00
Information
Ordering

45 0.34 0.66 1.29 1.54 3.12 4.30 5.48 7.22 8.94 10.66 12.36 14.61 17.40 11.60 2.32 0.00 0.00 0.00 0.00
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

54 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
#40 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 10 25 50 100 180 200 300 500 700 900 1,000 1,200 1,400 1,600 1,800 2,100 2,500 3,000 3,500 4,000 5,000 6,000 7,000 8,000
11 0.06 0.14 0.27 0.52 0.91 1.00 1.48 2.42 3.34 4.25 4.70 5.60 6.49 5.57 4.66 3.70 2.85 2.17 1.72 1.41 1.01 0.77 0.61 0.50
12 0.06 0.15 0.29 0.56 0.99 1.09 1.61 2.64 3.64 4.64 5.13 6.11 7.09 6.34 5.31 4.22 3.25 2.47 1.96 1.60 1.15 0.87 0.69 0.57
13 0.07 0.16 0.31 0.61 1.07 1.19 1.75 2.86 3.95 5.02 5.56 6.62 7.68 7.15 5.99 4.76 3.66 2.79 2.21 1.81 1.29 0.98 0.78
14 0.07 0.17 0.34 0.66 1.15 1.28 1.88 3.08 4.25 5.41 5.98 7.13 8.27 7.99 6.70 5.31 4.09 3.11 2.47 2.02 1.45 1.10 0.87

Selection
Guide
15 0.08 0.19 0.36 0.70 1.24 1.37 2.02 3.30 4.55 5.80 6.41 7.64 8.86 8.86 7.43 5.89 4.54 3.45 2.74 2.24 1.60 1.22 0.97

16 0.08 0.20 0.39 0.75 1.32 1.46 2.15 3.52 4.86 6.18 6.84 8.15 9.45 9.76 8.18 6.49 5.00 3.80 3.02 2.47 1.77 1.34
17 0.09 0.21 0.41 0.80 1.40 1.55 2.29 3.74 5.16 6.57 7.27 8.66 10.04 10.69 8.96 7.11 5.48 4.17 3.31 2.71 1.94 1.47
18 0.09 0.22 0.43 0.84 1.48 1.64 2.42 3.96 5.46 6.95 7.69 9.17 10.63 11.65 9.76 7.75 5.97 4.54 3.60 2.95 2.11 1.60
19 0.10 0.24 0.46 0.89 1.57 1.73 2.56 4.18 5.77 7.34 8.12 9.68 11.22 12.64 10.59 8.40 6.47 4.92 3.91 3.20 2.29 0.09
20 0.10 0.25 0.48 0.94 1.65 1.82 2.69 4.39 6.07 7.73 8.55 10.18 11.81 13.42 11.44 9.07 6.99 5.31 4.22 3.45 2.47

Carbon
Steel
21 0.11 0.26 0.51 0.98 1.73 1.91 2.83 4.61 6.37 8.11 8.98 10.69 12.40 14.10 12.30 9.76 7.52 5.72 4.54 3.71 2.66
22 0.11 0.27 0.53 1.03 1.81 2.01 2.96 4.83 6.68 8.50 9.40 11.20 12.99 14.77 13.19 10.47 8.06 6.13 4.87 3.98 2.85
23 0.12 0.28 0.55 1.08 1.90 2.10 3.10 5.05 6.98 8.89 9.83 11.71 13.58 15.44 14.10 11.19 8.62 6.55 5.20 4.26 3.05
24 0.12 0.30 0.58 1.12 1.98 2.19 3.23 5.27 7.28 9.27 10.26 12.22 14.17 16.11 15.03 11.93 9.18 6.99 5.54 4.54 0.87
25 0.13 0.31 0.60 1.17 2.06 2.28 3.36 5.49 7.59 9.66 10.69 12.73 14.76 16.78 15.98 12.68 9.76 7.43 5.89 4.82

& Moisture
Corrosion

Resistant
26 0.13 0.32 0.63 1.22 2.14 2.37 3.50 5.71 7.89 10.04 11.11 13.24 15.35 17.45 16.95 13.45 10.36 7.88 6.25 5.12
28 0.14 0.35 0.67 1.31 2.31 2.55 3.77 6.15 8.50 10.82 11.97 14.26 16.53 18.79 18.94 15.03 11.57 8.80 6.99 5.72
30 0.15 0.37 0.72 1.41 2.47 2.74 4.04 6.59 9.11 11.59 12.82 15.28 17.71 20.14 21.01 16.67 12.84 9.76 7.75 6.34
32 0.16 0.40 0.77 1.50 2.64 2.92 4.31 7.03 9.71 12.36 13.68 16.30 18.89 21.48 23.14 18.37 14.14 10.76 8.54 1.41
35 0.18 0.43 0.84 1.64 2.88 3.19 4.71 7.69 10.62 13.52 14.96 17.82 20.67 23.49 26.30 21.01 16.17 12.30 9.76

Maintenance
Reduced
40 0.21 0.50 0.96 1.87 3.30 3.65 5.38 8.79 12.14 15.45 17.10 20.37 23.62 26.85 30.06 25.67 19.76 15.03
45 0.23 0.56 1.08 2.11 3.71 4.10 6.06 9.89 13.66 17.39 19.24 22.92 26.57 30.20 33.82 30.63 23.58 5.53
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x

Attachments
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#40 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 10 25 50 100 180 200 300 500 700 900 1,000 1,200 1,400 1,600 1,800 2,100 2,500 3,000 3,500 4,000 5,000 6,000 7,000 8,000
11 0.04 0.10 0.20 0.39 0.68 0.75 1.10 1.80 2.49 3.17 3.50 4.18 4.84 4.15 3.47 2.76 2.13 1.62 1.28 1.05 0.75 0.57 0.45 0.37
12 0.04 0.11 0.22 0.42 0.74 0.81 1.20 1.97 2.71 3.46 3.83 4.56 5.29 4.73 3.96 3.15 2.42 1.84 1.46 1.19 0.86 0.65 0.51 0.43
13 0.05 0.12 0.23 0.45 0.80 0.89 1.30 2.13 2.95 3.74 4.15 4.94 5.73 5.33 4.47 3.55 2.73 2.08 1.65 1.35 0.96 0.73 0.58
14 0.05 0.13 0.25 0.49 0.86 0.95 1.40 2.30 3.17 4.03 4.46 5.32 6.17 5.96 5.00 3.96 3.05 2.32 1.84 1.51 1.08 0.82 0.65

Horsepower
15 0.06 0.14 0.27 0.52 0.92 1.02 1.51 2.46 3.39 4.33 4.78 5.70 6.61 6.61 5.54 4.39 3.39 2.57 2.04 1.67 1.19 0.91 0.72

Tables
16 0.06 0.15 0.29 0.56 0.98 1.09 1.60 2.62 3.62 4.61 5.10 6.08 7.05 7.28 6.10 4.84 3.73 2.83 2.25 1.84 1.32 1.00
17 0.07 0.16 0.31 0.60 1.04 1.16 1.71 2.79 3.85 4.90 5.42 6.46 7.49 7.97 6.68 5.30 4.09 3.11 2.47 2.02 1.45 1.10
18 0.07 0.16 0.32 0.63 1.10 1.22 1.80 2.95 4.07 5.18 5.73 6.84 7.93 8.69 7.28 5.78 4.45 3.39 2.68 2.20 1.57 1.19
19 0.07 0.18 0.34 0.66 1.17 1.29 1.91 3.12 4.30 5.47 6.06 7.22 8.37 9.43 7.90 6.26 4.82 3.67 2.92 2.39 1.71 0.07
20 0.07 0.19 0.36 0.70 1.23 1.36 2.01 3.27 4.53 5.76 6.38 7.59 8.81 10.01 8.53 6.76 5.21 3.96 3.15 2.57 1.84

Components
Chain
21 0.08 0.19 0.38 0.73 1.29 1.42 2.11 3.44 4.75 6.05 6.70 7.97 9.25 10.51 9.17 7.28 5.61 4.27 3.39 2.77 1.98
22 0.08 0.20 0.40 0.77 1.35 1.50 2.21 3.60 4.98 6.34 7.01 8.35 9.69 11.01 9.84 7.81 6.01 4.57 3.63 2.97 2.13
23 0.09 0.21 0.41 0.81 1.42 1.57 2.31 3.77 5.20 6.63 7.33 8.73 10.13 11.51 10.51 8.34 6.43 4.88 3.88 3.18 2.27
24 0.09 0.22 0.43 0.84 1.48 1.63 2.41 3.93 5.43 6.91 7.65 9.11 10.57 12.01 11.21 8.90 6.85 5.21 4.13 3.39 0.65
25 0.10 0.23 0.45 0.87 1.54 1.70 2.51 4.09 5.66 7.20 7.97 9.49 11.01 12.51 11.92 9.46 7.28 5.54 4.39 3.59
Troubleshooting

26 0.10 0.24 0.47 0.91 1.60 1.77 2.61 4.26 5.88 7.49 8.28 9.87 11.45 13.01 12.64 10.03 7.73 5.88 4.66 3.82
Tools,

28 0.10 0.26 0.50 0.98 1.72 1.90 2.81 4.59 6.34 8.07 8.93 10.63 12.33 14.01 14.12 11.21 8.63 6.56 5.21 4.27
30 0.11 0.28 0.54 1.05 1.84 2.04 3.01 4.91 6.79 8.64 9.56 11.39 13.21 15.02 15.67 12.43 9.57 7.28 5.78 4.73
32 0.12 0.30 0.57 1.12 1.97 2.18 3.21 5.24 7.24 9.22 10.20 12.15 14.09 16.02 17.26 13.70 10.54 8.02 6.37 1.05
35 0.13 0.32 0.63 1.22 2.15 2.38 3.51 5.73 7.92 10.08 11.16 13.29 15.41 17.52 19.61 15.67 12.06 9.17 7.28

40 0.16 0.37 0.72 1.39 2.46 2.72 4.01 6.55 9.05 11.52 12.75 15.19 17.61 20.02 22.42 19.14 14.74 11.21
Information
Ordering

45 0.17 0.42 0.81 1.57 2.77 3.06 4.52 7.37 10.19 12.97 14.35 17.09 19.81 22.52 25.22 22.84 17.58 4.12
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 55

 Diamond
Chain

Standard Series Horsepower Tables

#41 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 10 25 50 100 180 200 300 500 700 900 1,000 1,200 1,400 1,600 1,800 2,100 2,500 3,000 3,500 4,000 5,000 6,000 7,000 8,000
11 0.03 0.07 0.15 0.28 0.50 0.55 0.81 1.33 1.84 2.34 2.25 1.71 1.36 1.11 0.93 0.74 0.57 0.43 0.34 0.28 0.20 0.15 0.12 0.10
12 0.03 0.08 0.16 0.31 0.54 0.60 0.89 1.45 2.00 2.55 2.57 1.95 1.55 1.27 1.06 0.84 0.65 0.49 0.39 0.32 0.23 0.17 0.14 0.11
13 0.04 0.09 0.17 0.34 0.59 0.65 0.96 1.57 2.17 2.76 2.89 2.20 1.75 1.43 1.20 0.95 0.73 0.56 0.44 0.36 0.26 0.20 0.16
14 0.04 0.10 0.19 0.36 0.63 0.70 1.04 1.69 2.34 2.97 3.23 2.46 1.95 1.60 1.34 1.06 0.82 0.62 0.49 0.40 0.29 0.22 0.17
Selection
Guide

15 0.04 0.10 0.20 0.39 0.68 0.75 1.11 1.81 2.50 3.19 3.53 2.73 2.17 1.77 1.49 1.18 0.91 0.69 0.55 0.45 0.32 0.24 0.19
16 0.05 0.11 0.21 0.41 0.73 0.80 1.18 1.93 2.67 3.40 3.76 3.01 2.39 1.95 1.64 1.30 1.00 0.76 0.60 0.49 0.35 0.27
17 0.05 0.12 0.23 0.44 0.77 0.85 1.26 2.05 2.84 3.61 4.00 3.29 2.61 2.14 1.79 1.42 1.10 0.83 0.66 0.54 0.39 0.29
18 0.05 0.12 0.24 0.46 0.82 0.90 1.33 2.18 3.00 3.82 4.23 3.59 2.85 2.33 1.95 1.55 1.19 0.91 0.72 0.59 0.42 0.32
19 0.05 0.13 0.25 0.49 0.86 0.95 1.41 2.30 3.17 4.04 4.47 3.89 3.09 2.53 2.12 1.68 1.29 0.98 0.78 0.64 0.46 0.09
20 0.06 0.14 0.27 0.52 0.91 1.00 1.48 2.42 3.34 4.25 4.70 4.20 3.33 2.73 2.29 1.81 1.40 1.06 0.84 0.69 0.49
Carbon
Steel

21 0.06 0.14 0.28 0.54 0.95 1.05 1.55 2.54 3.51 4.46 4.94 4.52 3.59 2.94 2.46 1.95 1.50 1.14 0.91 0.74 0.53
22 0.06 0.15 0.29 0.57 1.00 1.10 1.63 2.66 3.67 4.67 5.17 4.85 3.85 3.15 2.64 2.09 1.61 1.23 0.97 0.80 0.57
23 0.07 0.16 0.30 0.59 1.04 1.15 1.70 2.78 3.84 4.89 5.41 5.18 4.11 3.37 2.82 2.24 1.72 1.31 1.04 0.85 0.61
24 0.07 0.16 0.32 0.62 1.09 1.20 1.78 2.90 4.01 5.10 5.64 5.52 4.38 3.59 3.01 2.39 1.84 1.40 1.11 0.91 0.65
25 0.07 0.17 0.33 0.64 1.13 1.25 1.85 3.02 4.17 5.31 5.88 5.87 4.66 3.81 3.20 2.54 1.95 1.49 1.18 0.96
& Moisture
Corrosion
Resistant

26 0.07 0.18 0.34 0.67 1.18 1.30 1.92 3.14 4.34 5.52 6.11 6.23 4.94 4.05 3.39 2.69 2.07 1.58 1.25 1.02
28 0.08 0.19 0.37 0.72 1.27 1.40 2.07 3.38 4.67 5.95 6.58 6.96 5.52 4.52 3.79 3.01 2.31 1.76 1.40 1.14
30 0.08 0.20 0.40 0.77 1.36 1.50 2.22 3.63 5.01 6.37 7.05 7.72 6.13 5.01 4.20 3.33 2.57 1.95 1.55 1.27
32 0.09 0.22 0.42 0.82 1.45 1.60 2.37 3.87 5.34 6.80 7.52 8.50 6.75 5.52 4.63 3.67 2.83 2.15 1.71 1.40
35 0.10 0.24 0.46 0.90 1.59 1.76 2.59 4.23 5.84 7.44 8.23 9.80 7.72 6.32 5.29 4.20 3.23 2.46 1.95
Maintenance

0.11 0.27 0.53 1.03 1.81 2.01 2.96 4.83 6.68 8.50 9.40 11.20 9.43 7.72 6.47 5.13 3.95 3.01
Reduced

40
45 0.13 0.31 0.60 1.16 2.04 2.26 3.33 5.44 7.51 9.56 10.58 12.60 11.25 9.21 7.72 6.13 4.72 3.59
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Attachments

#41 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 10 25 50 100 180 200 300 500 700 900 1,000 1,200 1,400 1,600 1,800 2,100 2,500 3,000 3,500 4,000 5,000 6,000 7,000 8,000
11 0.02 0.05 0.11 0.21 0.37 0.41 0.60 0.99 1.37 1.74 1.68 1.28 1.01 0.83 0.69 0.55 0.43 0.32 0.25 0.21 0.15 0.11 0.09 0.07
12 0.02 0.06 0.12 0.23 0.40 0.45 0.66 1.08 1.49 1.90 1.92 1.45 1.16 0.95 0.79 0.63 0.48 0.37 0.29 0.24 0.17 0.13 0.10 0.08
13 0.03 0.07 0.13 0.25 0.44 0.48 0.72 1.17 1.62 2.06 2.16 1.64 1.30 1.07 0.89 0.71 0.54 0.42 0.33 0.27 0.19 0.15 0.12
14 0.03 0.07 0.14 0.27 0.47 0.52 0.78 1.26 1.74 2.21 2.41 1.83 1.45 1.19 1.00 0.79 0.61 0.46 0.37 0.30 0.22 0.16 0.13
Horsepower

15 0.03 0.07 0.15 0.29 0.51 0.56 0.83 1.35 1.86 2.38 2.63 2.04 1.62 1.32 1.11 0.88 0.68 0.51 0.41 0.34 0.24 0.18 0.14
Tables

16 0.04 0.08 0.16 0.31 0.54 0.60 0.88 1.44 1.99 2.54 2.80 2.24 1.78 1.45 1.22 0.97 0.75 0.57 0.45 0.37 0.26 0.20
17 0.04 0.09 0.17 0.33 0.57 0.63 0.94 1.53 2.12 2.69 2.98 2.45 1.95 1.60 1.33 1.06 0.82 0.62 0.49 0.40 0.29 0.22
18 0.04 0.09 0.18 0.34 0.61 0.67 0.99 1.63 2.24 2.85 3.15 2.68 2.13 1.74 1.45 1.16 0.89 0.68 0.54 0.44 0.31 0.24
19 0.04 0.10 0.19 0.37 0.64 0.71 1.05 1.72 2.36 3.01 3.33 2.90 2.30 1.89 1.58 1.25 0.96 0.73 0.58 0.48 0.34 0.07
20 0.04 0.10 0.20 0.39 0.68 0.75 1.10 1.80 2.49 3.17 3.50 3.13 2.48 2.04 1.71 1.35 1.04 0.79 0.63 0.51 0.37
Components
Chain

21 0.04 0.10 0.21 0.40 0.71 0.78 1.16 1.89 2.62 3.33 3.68 3.37 2.68 2.19 1.83 1.45 1.12 0.85 0.68 0.55 0.40
22 0.04 0.11 0.22 0.43 0.75 0.82 1.22 1.98 2.74 3.48 3.86 3.62 2.87 2.35 1.97 1.56 1.20 0.92 0.72 0.60 0.43
23 0.05 0.12 0.22 0.44 0.78 0.86 1.27 2.07 2.86 3.65 4.03 3.86 3.06 2.51 2.10 1.67 1.28 0.98 0.78 0.63 0.45
24 0.05 0.12 0.24 0.46 0.81 0.89 1.33 2.16 2.99 3.80 4.21 4.12 3.27 2.68 2.24 1.78 1.37 1.04 0.83 0.68 0.48
25 0.05 0.13 0.25 0.48 0.84 0.93 1.38 2.25 3.11 3.96 4.38 4.38 3.47 2.84 2.39 1.89 1.45 1.11 0.88 0.72
Troubleshooting

26 0.05 0.13 0.25 0.50 0.88 0.97 1.43 2.34 3.24 4.12 4.56 4.65 3.68 3.02 2.53 2.01 1.54 1.18 0.93 0.76
Tools,

28 0.06 0.14 0.28 0.54 0.95 1.04 1.54 2.52 3.48 4.44 4.91 5.19 4.12 3.37 2.83 2.24 1.72 1.31 1.04 0.85
30 0.06 0.15 0.30 0.57 1.01 1.12 1.66 2.71 3.74 4.75 5.26 5.76 4.57 3.74 3.13 2.48 1.92 1.45 1.16 0.95
32 0.07 0.16 0.31 0.61 1.08 1.19 1.77 2.89 3.98 5.07 5.61 6.34 5.03 4.12 3.45 2.74 2.11 1.60 1.28 1.04
35 0.07 0.18 0.34 0.67 1.19 1.31 1.93 3.15 4.35 5.55 6.14 7.31 5.76 4.71 3.94 3.13 2.41 1.83 1.45

40 0.08 0.20 0.40 0.77 1.35 1.50 2.21 3.60 4.98 6.34 7.01 8.35 7.03 5.76 4.82 3.83 2.95 2.24
Information
Ordering

45 0.10 0.23 0.45 0.87 1.52 1.69 2.48 4.06 5.60 7.13 7.89 9.40 8.39 6.87 5.76 4.57 3.52 2.68
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Conditions
Terms and

56 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
#50 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 10 25 50 100 140 200 300 500 700 900 1,200 1,500 1,800 2,100 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000
11 0.11 0.27 0.52 1.00 1.39 1.95 2.88 4.70 6.50 8.27 10.24 7.33 5.58 4.42 3.41 2.59 2.06 1.68 1.41 1.20 1.04 0.92 0.81 0.73
12 0.12 0.29 0.56 1.09 1.51 2.13 3.14 5.13 7.09 9.02 11.67 8.35 6.35 5.04 3.88 2.95 2.34 1.92 1.61 1.37 1.19 1.04 0.93
13 0.13 0.31 0.61 1.19 1.64 2.31 3.40 5.56 7.68 9.77 12.88 9.42 7.16 5.69 4.38 3.33 2.64 2.16 1.81 1.55 1.34 1.18
14 0.14 0.34 0.66 1.28 1.76 2.48 3.67 5.99 8.27 10.53 13.87 10.52 8.01 6.35 4.89 3.72 2.95 2.42 2.03 1.73 1.50 0.28

Selection
Guide
15 0.15 0.36 0.70 1.37 1.89 2.66 3.93 6.41 8.86 11.28 14.86 11.67 8.88 7.05 5.42 4.13 3.27 2.68 2.25 1.92 1.66

16 0.16 0.39 0.75 1.46 2.02 2.84 4.19 6.84 9.45 12.03 15.85 12.86 9.78 7.76 5.98 4.55 3.61 2.95 2.47 2.11
17 0.17 0.41 0.80 1.55 2.14 3.02 4.45 7.27 10.04 12.78 16.85 14.08 10.71 8.50 6.55 4.98 3.95 3.23 2.71 2.31
18 0.18 0.43 0.84 1.64 2.27 3.19 4.71 7.70 10.63 13.53 17.84 15.34 11.67 9.26 7.13 5.42 4.30 3.52 2.95 0.05
19 0.19 0.46 0.89 1.73 2.39 3.37 4.98 8.12 11.22 14.28 18.83 16.64 12.66 10.05 7.73 5.88 4.67 3.82 3.20
20 0.20 0.48 0.94 1.82 2.52 3.55 5.24 8.55 11.81 15.04 19.82 17.97 13.67 10.85 8.35 6.35 5.04 4.13 3.46

Carbon
Steel
21 0.21 0.51 0.98 1.92 2.65 3.73 5.50 8.98 12.40 15.79 20.81 19.34 14.71 11.67 8.99 6.84 5.42 4.44
22 0.22 0.53 1.03 2.01 2.77 3.90 5.76 9.41 12.99 16.54 21.80 20.73 15.77 12.52 9.64 7.33 5.82 4.76
23 0.23 0.55 1.08 2.10 2.90 4.08 6.02 9.83 13.58 17.29 22.79 22.16 16.86 13.38 10.30 7.84 6.22 5.09
24 0.24 0.58 1.13 2.19 3.02 4.26 6.28 10.26 14.18 18.04 23.78 23.62 17.97 14.26 10.98 8.35 6.63 1.36
25 0.25 0.60 1.17 2.28 3.15 4.44 6.55 10.69 14.77 18.79 24.77 25.11 19.11 15.16 11.67 8.88 7.05

& Moisture
Corrosion

Resistant
26 0.26 0.63 1.22 2.37 3.28 4.61 6.81 11.12 15.36 19.55 25.76 26.64 20.26 16.08 12.38 9.42 7.47
28 0.28 0.67 1.31 2.55 3.53 4.97 7.33 11.97 16.54 21.05 27.75 29.77 22.65 17.97 13.84 10.52 4.74
30 0.30 0.72 1.41 2.74 3.78 5.32 7.86 12.83 17.72 22.55 29.73 33.01 25.11 19.93 15.34 11.67
32 0.32 0.77 1.50 2.92 4.03 5.68 8.38 13.68 18.90 24.06 31.71 36.37 27.67 21.96 16.90 12.86
35 0.35 0.84 1.64 3.19 4.41 6.21 9.16 14.97 20.67 26.31 34.68 41.60 31.65 25.11 19.34 0.94

Maintenance
Reduced
40 0.40 0.96 1.88 3.65 5.04 7.10 10.47 17.10 23.63 30.07 39.64 49.11 38.67 30.68 23.62
45 0.45 1.08 2.11 4.10 5.67 7.98 11.78 19.24 26.58 33.83 44.59 55.24 46.14 36.61 8.64
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x

Attachments
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#50 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 10 25 50 100 140 200 300 500 700 900 1,200 1,500 1,800 2,100 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000
11 0.08 0.20 0.39 0.75 1.04 1.45 2.15 3.50 4.85 6.17 7.64 5.47 4.16 3.30 2.54 1.93 1.54 1.25 1.05 0.89 0.78 0.69 0.60 0.54
12 0.09 0.22 0.42 0.81 1.13 1.59 2.34 3.83 5.29 6.73 8.70 6.23 4.74 3.76 2.89 2.20 1.74 1.43 1.20 1.02 0.89 0.78 0.69
13 0.10 0.23 0.45 0.89 1.22 1.72 2.54 4.15 5.73 7.29 9.60 7.02 5.34 4.24 3.27 2.48 1.97 1.61 1.35 1.16 1.00 0.88
14 0.10 0.25 0.49 0.95 1.31 1.85 2.74 4.47 6.17 7.85 10.34 7.84 5.97 4.74 3.65 2.77 2.20 1.80 1.51 1.29 1.12 0.21

Horsepower
15 0.11 0.27 0.52 1.02 1.41 1.98 2.93 4.78 6.61 8.41 11.08 8.70 6.62 5.26 4.04 3.08 2.44 2.00 1.68 1.43 1.24

Tables
16 0.12 0.29 0.56 1.09 1.51 2.12 3.12 5.10 7.05 8.97 11.82 9.59 7.29 5.79 4.46 3.39 2.69 2.20 1.84 1.57
17 0.13 0.31 0.60 1.16 1.60 2.25 3.32 5.42 7.49 9.53 12.57 10.50 7.99 6.34 4.88 3.71 2.95 2.41 2.02 1.72
18 0.13 0.32 0.63 1.22 1.69 2.38 3.51 5.74 7.93 10.09 13.30 11.44 8.70 6.91 5.32 4.04 3.21 2.62 2.20 0.04
19 0.14 0.34 0.66 1.29 1.78 2.51 3.71 6.06 8.37 10.65 14.04 12.41 9.44 7.49 5.76 4.38 3.48 2.85 2.39
20 0.15 0.36 0.70 1.36 1.88 2.65 3.91 6.38 8.81 11.22 14.78 13.40 10.19 8.09 6.23 4.74 3.76 3.08 2.58

Components
Chain
21 0.16 0.38 0.73 1.43 1.98 2.78 4.10 6.70 9.25 11.77 15.52 14.42 10.97 8.70 6.70 5.10 4.04 3.31
22 0.16 0.40 0.77 1.50 2.07 2.91 4.30 7.02 9.69 12.33 16.26 15.46 11.76 9.34 7.19 5.47 4.34 3.55
23 0.17 0.41 0.81 1.57 2.16 3.04 4.49 7.33 10.13 12.89 16.99 16.52 12.57 9.98 7.68 5.85 4.64 3.80
24 0.18 0.43 0.84 1.63 2.25 3.18 4.68 7.65 10.57 13.45 17.73 17.61 13.40 10.63 8.19 6.23 4.94 1.01
25 0.19 0.45 0.87 1.70 2.35 3.31 4.88 7.97 11.01 14.01 18.47 18.72 14.25 11.30 8.70 6.62 5.26
Troubleshooting

26 0.19 0.47 0.91 1.77 2.45 3.44 5.08 8.29 11.45 14.58 19.21 19.87 15.11 11.99 9.23 7.02 5.57
Tools,

28 0.21 0.50 0.98 1.90 2.63 3.71 5.47 8.93 12.33 15.70 20.69 22.20 16.89 13.40 10.32 7.84 3.53
30 0.22 0.54 1.05 2.04 2.82 3.97 5.86 9.57 13.21 16.82 22.17 24.62 18.72 14.86 11.44 8.70
32 0.24 0.57 1.12 2.18 3.01 4.24 6.25 10.20 14.09 17.94 23.65 27.12 20.63 16.38 12.60 9.59
35 0.26 0.63 1.22 2.38 3.29 4.63 6.83 11.16 15.41 19.62 25.86 31.02 23.60 18.72 14.42 0.70

40 0.30 0.72 1.40 2.72 3.76 5.29 7.81 12.75 17.62 22.42 29.56 36.62 28.84 22.88 17.61
Information
Ordering

45 0.34 0.81 1.57 3.06 4.23 5.95 8.78 14.35 19.82 25.23 33.25 41.19 34.41 27.30 6.44
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 57

 Diamond
Chain

Standard Series Horsepower Tables

#60 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 10 25 50 100 120 200 300 400 500 600 800 1,000 1,200 1,400 1,600 1,800 2,0`00 2,500 3,000 3,500 4,000 4,500 5,000 5,500
11 0.19 0.46 0.89 1.72 2.05 3.35 4.95 6.52 8.08 9.63 12.69 15.58 11.85 9.41 7.70 6.45 5.51 3.94 3.00 2.38 1.95 1.63 1.39 1.21
12 0.21 0.50 0.97 1.88 2.24 3.66 5.40 7.12 8.82 10.51 13.85 17.15 13.51 10.72 8.77 7.35 6.28 4.49 3.42 2.71 2.22 1.86 1.59 1.38
13 0.22 0.54 1.05 2.04 2.43 3.96 5.85 7.71 9.55 11.38 15.00 18.58 15.23 12.08 9.89 8.29 7.08 5.06 3.85 3.06 2.50 2.10 1.79
14 0.24 0.58 1.13 2.19 2.61 4.27 6.30 8.30 10.29 12.26 16.15 20.01 17.02 13.51 11.05 9.26 7.91 5.66 4.31 3.42 2.80 2.34 0.41
Selection
Guide

15 0.26 0.62 1.21 2.35 2.80 4.57 6.75 8.90 11.02 13.13 17.31 21.44 18.87 14.98 12.26 10.27 8.77 6.28 4.77 3.79 3.10 2.60

16 0.27 0.66 1.29 2.51 2.99 4.88 7.20 9.49 11.76 14.01 18.46 22.87 20.79 16.50 13.51 11.32 9.66 6.91 5.26 4.17 3.42 1.78
17 0.29 0.70 1.37 2.66 3.17 5.18 7.65 10.08 12.49 14.88 19.62 24.30 22.77 18.07 14.79 12.40 10.58 7.57 5.76 4.57 3.74
18 0.31 0.75 1.45 2.82 3.36 5.49 8.10 10.68 13.23 15.76 20.77 25.73 24.81 19.69 16.11 13.51 11.53 8.25 6.28 4.98 4.08
19 0.33 0.79 1.53 2.98 3.55 5.79 8.55 11.27 13.96 16.63 21.92 27.16 26.91 21.35 17.48 14.65 12.50 8.95 6.81 5.40 0.20
20 0.34 0.83 1.61 3.13 3.73 6.10 9.00 11.86 14.70 17.51 23.08 28.59 29.06 23.06 18.87 15.82 13.51 9.66 7.35 5.83
Carbon
Steel

21 0.36 0.87 1.69 3.29 3.92 6.40 9.45 12.46 15.43 18.38 24.23 30.02 31.26 24.81 20.31 17.02 14.53 10.40 7.91 6.28
22 0.38 0.91 1.77 3.45 4.11 6.71 9.90 13.05 16.17 19.26 25.39 31.45 33.52 26.60 21.77 18.25 15.58 11.15 8.48
23 0.40 0.95 1.85 3.61 4.29 7.01 10.35 13.64 16.90 20.13 26.54 32.88 35.84 28.44 23.28 19.51 16.66 11.92 9.07
24 0.41 0.99 1.93 3.76 4.48 7.32 10.80 14.24 17.64 21.01 27.69 34.31 38.20 30.31 24.81 20.79 17.75 12.70 9.66
25 0.43 1.04 2.01 3.92 4.67 7.62 11.25 14.83 18.37 21.89 28.85 35.74 40.61 32.23 26.38 22.11 18.87 13.51 10.27
& Moisture
Corrosion
Resistant

26 0.45 1.08 2.09 4.08 4.85 7.93 11.70 15.42 19.11 22.76 30.00 37.17 43.07 34.18 27.98 23.44 20.02 14.32 10.90
28 0.48 1.16 2.26 4.39 5.23 8.54 12.60 16.61 20.58 24.51 32.31 40.03 47.68 38.20 31.26 26.20 22.37 16.01
30 0.52 1.24 2.42 4.70 5.60 9.15 13.50 17.79 22.05 26.26 34.62 42.89 51.09 42.36 34.67 29.06 24.81 17.75
32 0.55 1.33 2.58 5.02 5.98 9.76 14.40 18.98 23.52 28.01 36.92 45.75 54.50 46.67 38.20 32.01 27.33 19.56
35 0.60 1.45 2.82 5.49 6.54 10.67 15.75 20.76 25.72 30.64 40.39 50.03 59.60 53.38 43.69 36.62 31.26 1.35
Maintenance

0.69 1.66 3.22 6.27 7.47 12.20 18.00 23.73 29.39 35.02 46.16 57.18 68.12 65.22 53.38 44.74 38.20
Reduced

40
45 0.77 1.86 3.63 7.05 8.40 13.72 20.25 26.69 33.07 39.39 51.92 64.33 76.63 77.83 63.70 53.38 12.45
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
Attachments

4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#60 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 10 25 50 100 120 200 300 400 500 600 800 1,000 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
11 0.14 0.34 0.66 1.28 1.53 2.50 3.69 4.86 6.03 7.18 9.46 11.62 8.84 7.02 5.74 4.81 4.11 2.94 2.24 1.77 1.45 1.22 1.04 0.90
12 0.16 0.37 0.72 1.40 1.67 2.73 4.03 5.31 6.58 7.84 10.33 12.79 10.07 7.99 6.54 5.48 4.68 3.35 2.55 2.02 1.66 1.39 1.19 1.03
13 0.16 0.40 0.78 1.52 1.81 2.95 4.36 5.75 7.12 8.49 11.19 13.86 11.36 9.01 7.37 6.18 5.28 3.77 2.87 2.28 1.86 1.57 1.33
14 0.18 0.43 0.84 1.63 1.95 3.18 4.70 6.19 7.67 9.14 12.04 14.92 12.69 10.07 8.24 6.91 5.90 4.22 3.21 2.55 2.09 1.74 0.31
Horsepower

15 0.19 0.46 0.90 1.75 2.09 3.41 5.03 6.64 8.22 9.79 12.91 15.99 14.07 11.17 9.14 7.66 6.54 4.68 3.56 2.83 2.31 1.94
Tables

16 0.20 0.49 0.96 1.87 2.23 3.64 5.37 7.08 8.77 10.45 13.77 17.05 15.50 12.30 10.07 8.44 7.20 5.15 3.92 3.11 2.55 1.33
17 0.22 0.52 1.02 1.98 2.36 3.86 5.70 7.52 9.31 11.10 14.63 18.12 16.98 13.47 11.03 9.25 7.89 5.64 4.30 3.41 2.79
18 0.23 0.56 1.08 2.10 2.51 4.09 6.04 7.96 9.87 11.75 15.49 19.19 18.50 14.68 12.01 10.07 8.60 6.15 4.68 3.71 3.04
19 0.25 0.59 1.14 2.22 2.65 4.32 6.38 8.40 10.41 12.40 16.35 20.25 20.07 15.92 13.03 10.92 9.32 6.67 5.08 4.03 0.15
20 0.25 0.62 1.20 2.33 2.78 4.55 6.71 8.84 10.96 13.06 17.21 21.32 21.67 17.20 14.07 11.80 10.07 7.20 5.48 4.35
Components
Chain

21 0.27 0.65 1.26 2.45 2.92 4.77 7.05 9.29 11.51 13.71 18.07 22.39 23.31 18.50 15.15 12.69 10.84 7.76 5.90 4.68
22 0.28 0.68 1.32 2.57 3.06 5.00 7.38 9.73 12.06 14.36 18.93 23.45 25.00 19.84 16.23 13.61 11.62 8.31 6.32
23 0.30 0.71 1.38 2.69 3.20 5.23 7.72 10.17 12.60 15.01 19.79 24.52 26.73 21.21 17.36 14.55 12.42 8.89 6.76
24 0.31 0.74 1.44 2.80 3.34 5.46 8.05 10.62 13.15 15.67 20.65 25.58 28.49 22.60 18.50 15.50 13.24 9.47 7.20
25 0.32 0.78 1.50 2.92 3.48 5.68 8.39 11.06 13.70 16.32 21.51 26.65 30.28 24.03 19.67 16.49 14.07 10.07 7.66
Troubleshooting

26 0.34 0.81 1.56 3.04 3.62 5.91 8.72 11.50 14.25 16.97 22.37 27.72 32.12 25.49 20.86 17.48 14.93 10.68 8.13
Tools,

28 0.36 0.87 1.69 3.27 3.90 6.37 9.40 12.39 15.35 18.28 24.09 29.85 35.55 28.49 23.31 19.54 16.68 11.94
30 0.39 0.92 1.80 3.50 4.18 6.82 10.07 13.27 16.44 19.58 25.82 31.98 38.10 31.59 25.85 21.67 18.50 13.24
32 0.41 0.99 1.92 3.74 4.46 7.28 10.74 14.15 17.54 20.89 27.53 34.12 40.64 34.80 28.49 23.87 20.38 14.59
35 0.45 1.08 2.10 4.09 4.88 7.96 11.74 15.48 19.18 22.85 30.12 37.31 44.44 39.81 32.58 27.31 23.31 1.01

40 0.51 1.24 2.40 4.68 5.57 9.10 13.42 17.70 21.92 26.11 34.42 42.64 50.80 48.63 39.81 33.36 28.49
Information
Ordering

45 0.57 1.39 2.71 5.26 6.26 10.23 15.10 19.90 24.66 29.37 38.72 47.97 57.14 58.04 47.50 39.81 9.28
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

58 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
#80 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 10 25 50 75 88 100 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000
11 0.44 1.06 2.07 3.05 3.56 4.03 7.83 11.56 15.23 18.87 22.48 26.07 27.41 22.97 19.61 14.92 11.84 9.69 8.12 6.93 4.96 3.77 3.00 2.45
12 0.48 1.16 2.26 3.33 3.88 4.39 8.54 12.61 16.62 20.59 24.53 28.44 31.23 26.17 22.35 17.00 13.49 11.04 9.25 7.90 5.65 4.30 3.41 2.79
13 0.52 1.26 2.45 3.61 4.21 4.76 9.26 13.66 18.00 22.31 26.57 30.81 35.02 29.51 25.20 19.17 15.21 12.45 10.43 8.91 6.37 4.85 3.85 3.15
14 0.56 1.35 2.63 3.89 4.53 5.12 9.97 14.71 19.39 24.02 28.62 33.18 37.72 32.98 28.16 21.42 17.00 13.91 11.66 9.96 7.12 5.42 4.30 3.52

Selection
Guide
15 0.60 1.45 2.82 4.16 4.86 5.49 10.68 15.76 20.77 25.74 30.66 35.55 40.41 36.58 31.23 23.76 18.85 15.43 12.93 11.04 7.90 6.01 4.77

16 0.64 1.55 3.01 4.44 5.18 5.86 11.39 16.81 22.16 27.45 32.70 37.92 43.11 40.30 34.41 26.17 20.77 17.00 14.25 12.16 8.70 6.62 5.25
17 0.68 1.64 3.20 4.72 5.50 6.22 12.10 17.86 23.54 29.17 34.75 40.29 45.80 44.13 37.68 28.66 22.75 18.62 15.60 13.32 9.53 7.25
18 0.72 1.74 3.39 5.00 5.83 6.59 12.81 18.91 24.93 30.88 36.79 42.66 48.49 48.08 41.05 31.23 24.78 20.29 17.00 14.51 10.39 7.90
19 0.76 1.84 3.57 5.28 6.15 6.95 13.53 19.96 26.31 32.60 38.84 45.03 51.19 52.15 44.52 33.87 26.88 22.00 18.44 15.74 11.26 0.36
20 0.80 1.93 3.76 5.55 6.47 7.32 14.24 21.01 27.70 34.32 40.88 47.40 53.88 56.32 48.08 36.58 29.03 23.76 19.91 17.00 12.16

Carbon
Steel
21 0.84 2.03 3.95 5.83 6.80 7.69 14.95 22.07 29.08 36.03 42.92 49.77 56.58 60.59 51.73 39.36 31.23 25.56 21.42 18.29 13.09
22 0.88 2.13 4.14 6.11 7.12 8.05 15.66 23.12 30.47 37.75 44.97 52.14 59.27 64.97 55.47 42.20 33.49 27.41 22.97 19.61 14.03
23 0.92 2.22 4.33 6.39 7.45 8.42 16.37 24.17 31.85 39.46 47.01 54.51 61.97 69.38 59.30 45.11 35.80 29.30 24.55 20.97 15.00
24 0.96 2.32 4.52 6.66 7.77 8.78 17.09 25.22 33.24 41.18 49.06 56.88 64.66 72.40 63.21 48.08 38.16 31.23 26.17 22.35 15.99
25 1.00 2.42 4.70 6.94 8.09 9.15 17.80 26.27 34.62 42.89 51.10 59.25 67.35 75.42 67.20 51.12 40.57 33.20 27.83 23.76 8.16

& Moisture
Corrosion

Resistant
26 1.04 2.51 4.89 7.22 8.42 9.52 18.51 27.32 36.01 44.61 53.14 61.62 70.05 78.43 71.27 54.22 43.02 35.22 29.51 25.20
28 1.12 2.71 5.27 7.77 9.06 10.25 19.93 29.42 38.78 48.04 57.23 66.36 75.44 84.47 79.65 60.59 48.08 39.36 32.98 28.16
30 1.20 2.90 5.64 8.33 9.71 10.98 21.36 31.52 41.55 51.47 61.32 71.10 80.82 90.50 88.33 67.20 53.33 43.65 36.58 31.23
32 1.28 3.09 6.02 8.89 10.36 11.71 22.78 33.62 44.32 54.91 65.41 75.84 86.21 96.53 97.31 74.03 58.75 48.08 40.30 5.65
35 1.40 3.38 6.58 9.72 11.33 12.81 24.92 36.78 48.47 60.05 71.54 82.95 94.29 105.58 111.31 84.68 67.20 55.00 28.15

Maintenance
Reduced
40 1.61 3.87 7.53 11.11 12.95 14.64 28.48 42.03 55.40 68.63 81.76 94.80 107.77 120.67 133.51 103.46 82.10 40.16
45 1.81 4.35 8.47 12.49 14.57 16.47 32.04 47.28 62.32 77.21 91.98 106.65 121.24 135.75 150.20 123.45 72.28
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x

Attachments
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#80 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 10 25 50 75 88 100 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000
11 0.33 0.79 1.54 2.27 2.65 3.01 5.84 8.62 11.36 14.07 16.76 19.44 20.44 17.13 14.62 11.13 8.83 7.23 6.06 5.17 3.70 2.81 2.24 1.83
12 0.36 0.87 1.69 2.48 2.89 3.27 6.37 9.40 12.39 15.35 18.29 21.21 23.29 19.51 16.67 12.68 10.06 8.23 6.90 5.89 4.21 3.21 2.54 2.08
13 0.39 0.94 1.83 2.69 3.14 3.55 6.91 10.19 13.42 16.64 19.81 22.98 26.11 22.01 18.79 14.30 11.34 9.28 7.78 6.64 4.75 3.62 2.87 2.35
14 0.42 1.01 1.96 2.90 3.38 3.82 7.43 10.97 14.46 17.91 21.34 24.74 28.13 24.59 21.00 15.97 12.68 10.37 8.69 7.43 5.31 4.04 3.21 2.62

Horsepower
15 0.45 1.08 2.10 3.10 3.62 4.09 7.96 11.75 15.49 19.19 22.86 26.51 30.13 27.28 23.29 17.72 14.06 11.51 9.64 8.23 5.89 4.48 3.56

Tables
16 0.48 1.16 2.24 3.31 3.86 4.37 8.49 12.54 16.52 20.47 24.38 28.28 32.15 30.05 25.66 19.51 15.49 12.68 10.63 9.07 6.49 4.94 3.91
17 0.51 1.22 2.39 3.52 4.10 4.64 9.02 13.32 17.55 21.75 25.91 30.04 34.15 32.91 28.10 21.37 16.96 13.88 11.63 9.93 7.11 5.41
18 0.54 1.30 2.53 3.73 4.35 4.91 9.55 14.10 18.59 23.03 27.43 31.81 36.16 35.85 30.61 23.29 18.48 15.13 12.68 10.82 7.75 5.89
19 0.57 1.37 2.66 3.94 4.59 5.18 10.09 14.88 19.62 24.31 28.96 33.58 38.17 38.89 33.20 25.26 20.04 16.41 13.75 11.74 8.40 0.27
20 0.60 1.44 2.80 4.14 4.82 5.46 10.62 15.67 20.66 25.59 30.48 35.35 40.18 42.00 35.85 27.28 21.65 17.72 14.85 12.68 9.07

Components
Chain
21 0.63 1.51 2.95 4.35 5.07 5.73 11.15 16.46 21.68 26.87 32.01 37.11 42.19 45.18 38.58 29.35 23.29 19.06 15.97 13.64 9.76
22 0.66 1.59 3.09 4.56 5.31 6.00 11.68 17.24 22.72 28.15 33.53 38.88 44.20 48.45 41.36 31.47 24.97 20.44 17.13 14.62 10.46
23 0.69 1.66 3.23 4.77 5.56 6.28 12.21 18.02 23.75 29.43 35.06 40.65 46.21 51.74 44.22 33.64 26.70 21.85 18.31 15.64 11.19
24 0.72 1.73 3.37 4.97 5.79 6.55 12.74 18.81 24.79 30.71 36.58 42.42 48.22 53.99 47.14 35.85 28.46 23.29 19.51 16.67 11.92
25 0.75 1.80 3.50 5.18 6.03 6.82 13.27 19.59 25.82 31.98 38.11 44.18 50.22 56.24 50.11 38.12 30.25 24.76 20.75 17.72 6.08
Troubleshooting

26 0.78 1.87 3.65 5.38 6.28 7.10 13.80 20.37 26.85 33.27 39.63 45.95 52.24 58.49 53.15 40.43 32.08 26.26 22.01 18.79
Tools,

28 0.84 2.02 3.93 5.79 6.76 7.64 14.86 21.94 28.92 35.82 42.68 49.48 56.26 62.99 59.40 45.18 35.85 29.35 24.59 21.00
30 0.89 2.16 4.21 6.21 7.24 8.19 15.93 23.50 30.98 38.38 45.73 53.02 60.27 67.49 65.87 50.11 39.77 32.55 27.28 23.29
32 0.95 2.30 4.49 6.63 7.73 8.73 16.99 25.07 33.05 40.95 48.78 56.55 64.29 71.98 72.56 55.20 43.81 35.85 30.05 4.21
35 1.04 2.52 4.91 7.25 8.45 9.55 18.58 27.43 36.14 44.78 53.35 61.86 70.31 78.73 83.00 63.15 50.11 41.01 20.99

40 1.20 2.89 5.62 8.28 9.66 10.92 21.24 31.34 41.31 51.18 60.97 70.69 80.36 89.98 99.56 77.15 61.22 29.95
Information
Ordering

45 1.35 3.24 6.32 9.31 10.86 12.28 23.89 35.26 46.47 57.58 68.59 79.53 90.41 101.23 112.00 92.06 53.90
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 59

 Diamond
Chain

Standard Series Horsepower Tables

#100 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 10 25 50 71 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500
11 0.85 2.04 3.96 5.55 7.71 11.38 15.00 22.14 29.18 36.15 43.06 40.03 32.77 27.46 23.45 20.32 17.84 14.15 11.58 9.71 8.29 5.93 4.51 3.58
12 0.92 2.22 4.32 6.05 8.41 12.41 16.36 24.15 31.83 39.44 46.98 45.61 37.33 31.29 26.71 23.16 20.32 16.13 13.20 11.06 9.45 6.76 5.14
13 1.00 2.41 4.68 6.56 9.11 13.45 17.73 26.16 34.48 42.72 50.89 51.43 42.10 35.28 30.12 26.11 22.92 18.18 14.88 12.47 10.65 7.62 5.80
14 1.08 2.59 5.04 7.06 9.81 14.48 19.09 28.18 37.14 46.01 54.81 57.48 47.05 39.43 33.66 29.18 25.61 20.32 16.63 13.94 11.90 8.52 1.13
Selection
Guide

15 1.15 2.78 5.41 7.57 10.51 15.52 20.45 30.19 39.79 49.30 58.72 63.75 52.18 43.73 37.33 32.36 28.40 22.54 18.45 15.46 13.20 9.45

16 1.23 2.96 5.77 8.07 11.22 16.55 21.82 32.20 42.44 52.58 62.64 70.23 57.48 48.17 41.13 35.65 31.29 24.83 20.32 17.03 14.54 10.41
17 1.31 3.15 6.13 8.58 11.92 17.59 23.18 34.21 45.10 55.87 66.55 76.91 62.95 52.76 45.05 39.04 34.27 27.19 22.26 18.65 15.93 11.40
18 1.38 3.33 6.49 9.08 12.62 18.62 24.55 36.23 47.75 59.15 70.47 81.71 68.59 57.48 49.08 42.54 37.33 29.63 24.25 20.32 17.35 0.18
19 1.46 3.52 6.85 9.59 13.32 19.66 25.91 38.24 50.40 62.44 74.38 86.25 74.38 62.34 53.22 46.13 40.49 32.13 26.30 22.04 18.82
20 1.54 3.70 7.21 10.09 14.02 20.69 27.27 40.25 53.05 65.73 78.30 90.79 80.33 67.32 57.48 49.82 43.73 34.70 28.40 23.80 20.32
Carbon
Steel

21 1.61 3.89 7.57 10.60 14.72 21.73 28.64 42.26 55.71 69.01 82.21 95.33 86.43 72.43 61.85 53.61 47.05 37.33 30.56 25.61 21.87
22 1.69 4.08 7.93 11.10 15.42 22.76 30.00 44.28 58.36 72.30 86.13 99.87 92.68 77.67 66.31 57.48 50.45 40.03 32.77 27.46 23.45
23 1.77 4.26 8.29 11.60 16.12 23.79 31.36 46.29 61.01 75.59 90.04 104.41 99.07 83.02 70.89 61.44 53.93 42.79 35.03 29.35 25.06
24 1.84 4.45 8.65 12.11 16.82 24.83 32.73 48.30 63.66 78.87 93.96 108.95 105.60 88.50 75.56 65.49 57.48 45.61 37.33 31.29 5.43
25 1.92 4.63 9.01 12.61 17.52 25.86 34.09 50.31 66.32 82.16 97.87 113.48 112.27 94.09 80.33 69.63 61.11 48.49 39.69 33.26
& Moisture
Corrosion
Resistant

26 2.00 4.82 9.37 13.12 18.23 26.90 35.45 52.33 68.97 85.45 101.79 118.02 119.07 99.79 85.20 73.85 64.81 51.43 42.10 35.28
28 2.15 5.19 10.09 14.13 19.63 28.97 38.18 56.35 74.27 92.02 109.62 127.10 133.07 111.52 95.22 82.53 72.43 57.48 47.05
30 2.31 5.56 10.81 15.14 21.03 31.04 40.91 60.38 79.58 98.59 117.45 136.18 147.58 123.68 105.60 91.53 80.33 63.75 49.40
32 2.46 5.93 11.53 16.15 22.43 33.11 43.64 64.40 84.88 105.16 125.28 145.26 162.58 136.25 116.33 100.84 88.50 70.23 8.82
35 2.69 6.48 12.61 17.66 24.53 36.21 47.73 70.44 92.84 115.02 137.02 158.88 180.61 155.85 133.07 115.34 101.23 69.02
Maintenance
Reduced

40 3.07 7.41 14.41 20.18 28.04 41.38 54.54 80.50 106.11 131.45 156.60 181.58 206.41 190.42 162.58 140.92 122.68
45 3.46 8.34 16.22 22.71 31.54 46.55 61.36 90.56 119.37 147.89 176.17 204.27 232.21 227.21 194.00 168.15 34.58
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
Attachments

4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#100 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 10 25 50 71 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500
11 0.63 1.52 2.95 4.14 5.75 8.49 11.19 16.51 21.76 26.96 32.11 29.85 24.44 20.48 17.49 15.15 13.30 10.55 8.64 7.24 6.18 4.42 3.36 2.67
12 0.69 1.66 3.22 4.51 6.27 9.25 12.20 18.01 23.74 29.41 35.03 34.01 27.84 23.33 19.92 17.27 15.15 12.03 9.84 8.25 7.05 5.04 3.83
13 0.75 1.80 3.49 4.89 6.79 10.03 13.22 19.51 25.71 31.86 37.95 38.35 31.39 26.31 22.46 19.47 17.09 13.56 11.10 9.30 7.94 5.68 4.33
14 0.81 1.93 3.76 5.26 7.32 10.80 14.24 21.01 27.70 34.31 40.87 42.86 35.09 29.40 25.10 21.76 19.10 15.15 12.40 10.40 8.87 6.35 0.84
Horsepower

15 0.86 2.07 4.03 5.64 7.84 11.57 15.25 22.51 29.67 36.76 43.79 47.54 38.91 32.61 27.84 24.13 21.18 16.81 13.76 11.53 9.84 7.05
Tables

16 0.92 2.21 4.30 6.02 8.37 12.34 16.27 24.01 31.65 39.21 46.71 52.37 42.86 35.92 30.67 26.58 23.33 18.52 15.15 12.70 10.84 7.76
17 0.98 2.35 4.57 6.40 8.89 13.12 17.29 25.51 33.63 41.66 49.63 57.35 46.94 39.34 33.59 29.11 25.56 20.28 16.60 13.91 11.88 8.50
18 1.03 2.48 4.84 6.77 9.41 13.88 18.31 27.02 35.61 44.11 52.55 60.93 51.15 42.86 36.60 31.72 27.84 22.10 18.08 15.15 12.94 0.13
19 1.09 2.62 5.11 7.15 9.93 14.66 19.32 28.52 37.58 46.56 55.47 64.32 55.47 46.49 39.69 34.40 30.19 23.96 19.61 16.44 14.03
20 1.15 2.76 5.38 7.52 10.45 15.43 20.34 30.01 39.56 49.01 58.39 67.70 59.90 50.20 42.86 37.15 32.61 25.88 21.18 17.75 15.15
Components
Chain

21 1.20 2.90 5.64 7.90 10.98 16.20 21.36 31.51 41.54 51.46 61.30 71.09 64.45 54.01 46.12 39.98 35.09 27.84 22.79 19.10 16.31
22 1.26 3.04 5.91 8.28 11.50 16.97 22.37 33.02 43.52 53.91 64.23 74.47 69.11 57.92 49.45 42.86 37.62 29.85 24.44 20.48 17.49
23 1.32 3.18 6.18 8.65 12.02 17.74 23.39 34.52 45.50 56.37 67.14 77.86 73.88 61.91 52.86 45.82 40.22 31.91 26.12 21.89 18.69
24 1.37 3.32 6.45 9.03 12.54 18.52 24.41 36.02 47.47 58.81 70.07 81.24 78.75 65.99 56.35 48.84 42.86 34.01 27.84 23.33 4.05
25 1.43 3.45 6.72 9.40 13.06 19.28 25.42 37.52 49.45 61.27 72.98 84.62 83.72 70.16 59.90 51.92 45.57 36.16 29.60 24.80
Troubleshooting

26 1.49 3.59 6.99 9.78 13.59 20.06 26.44 39.02 51.43 63.72 75.90 88.01 88.79 74.41 63.53 55.07 48.33 38.35 31.39 26.31
Tools,

28 1.60 3.87 7.52 10.54 14.64 21.60 28.47 42.02 55.38 68.62 81.74 94.78 99.23 83.16 71.01 61.54 54.01 42.86 35.09
30 1.72 4.15 8.06 11.29 15.68 23.15 30.51 45.03 59.34 73.52 87.58 101.55 110.05 92.23 78.75 68.25 59.90 47.54 36.84
32 1.83 4.42 8.60 12.04 16.73 24.69 32.54 48.02 63.30 78.42 93.42 108.32 121.24 101.60 86.75 75.20 65.99 52.37 6.58
35 2.01 4.83 9.40 13.17 18.29 27.00 35.59 52.53 69.23 85.77 102.18 118.48 134.68 116.22 99.23 86.01 75.49 51.47

40 2.29 5.53 10.75 15.05 20.91 30.86 40.67 60.03 79.13 98.02 116.78 135.40 153.92 142.00 121.24 105.08 91.48
Information
Ordering

45 2.58 6.22 12.10 16.93 23.52 34.71 45.76 67.53 89.01 110.28 131.37 152.32 173.16 169.43 144.67 125.39 25.79
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

60 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
ANSI #120 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 10 25 50 60 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,700
11 1.43 3.44 6.69 7.97 9.88 13.02 19.22 25.33 37.38 49.27 61.04 58.37 46.32 37.91 31.77 27.13 20.64 16.38 13.40 11.23 9.59 8.31 7.30 6.11
12 1.56 3.75 7.30 8.70 10.78 14.20 20.96 27.63 40.78 53.75 66.59 66.51 52.78 43.20 36.20 30.91 23.51 18.66 15.27 12.80 10.93 9.47 8.31 6.97
13 1.69 4.07 7.91 9.42 11.67 15.39 22.71 29.93 44.18 58.23 72.14 74.99 59.51 48.71 40.82 34.85 26.51 21.04 17.22 14.43 12.32 10.68 9.37
14 1.82 4.38 8.52 10.15 12.57 16.57 24.46 32.24 47.58 62.71 77.69 83.81 66.51 54.44 45.62 38.95 29.63 23.51 19.25 16.13 13.77 11.94 10.48

Selection
Guide
15 1.95 4.69 9.13 10.87 13.47 17.76 26.20 34.54 50.98 67.19 83.24 92.95 73.76 60.37 50.59 43.20 32.86 26.08 21.34 17.89 15.27 13.24

16 2.08 5.00 9.74 11.60 14.37 18.94 27.95 36.84 54.37 71.67 88.79 102.39 81.26 66.51 55.74 47.59 36.20 28.73 23.51 19.71 16.83 14.58
17 2.21 5.32 10.34 12.32 15.27 20.12 29.70 39.14 57.77 76.15 94.34 112.14 88.99 72.84 61.04 52.12 39.65 31.46 25.75 21.58 18.43
18 2.34 5.63 10.95 13.05 16.16 21.31 31.45 41.45 61.17 80.63 99.89 119.00 96.96 79.36 66.51 56.78 43.20 34.28 28.06 23.51 20.08
19 2.47 5.94 11.56 13.77 17.06 22.49 33.19 43.75 64.57 85.11 105.44 125.61 105.15 86.06 72.13 61.58 46.85 37.18 30.43 25.50 0.80
20 2.60 6.26 12.17 14.50 17.96 23.67 34.94 46.05 67.97 89.59 110.99 132.22 113.56 92.95 77.89 66.51 50.59 40.15 32.86 27.54

Carbon
Steel
21 2.73 6.57 12.78 15.22 18.86 24.86 36.69 48.36 71.37 94.07 116.54 138.83 122.18 100.00 83.81 71.56 54.44 43.20 35.36 27.46
22 2.86 6.88 13.39 15.95 19.76 26.04 38.43 50.66 74.76 98.55 122.09 145.44 131.01 107.23 89.87 76.73 58.37 46.32 37.91
23 2.99 7.19 14.00 16.67 20.65 27.22 40.18 52.96 78.16 103.02 127.64 152.05 140.04 114.62 96.06 82.02 62.39 49.51 40.53
24 3.11 7.51 14.60 17.40 21.55 28.41 41.93 55.26 81.56 107.50 133.19 158.66 149.28 122.18 102.39 87.43 66.51 52.78 43.20
25 3.24 7.82 15.21 18.12 22.45 29.59 43.67 57.57 84.96 111.98 138.74 165.27 158.70 129.90 108.86 92.95 70.71 56.11 18.37

& Moisture
Corrosion

Resistant
26 3.37 8.13 15.82 18.85 23.35 30.78 45.42 59.87 88.36 116.46 144.29 171.88 168.32 137.77 115.46 98.58 74.99 59.51
28 3.63 8.76 17.04 20.30 25.15 33.14 48.92 64.47 95.15 125.42 155.38 185.11 188.11 153.97 129.03 110.17 83.81 66.51
30 3.89 9.38 18.25 21.75 26.94 35.51 52.41 69.08 101.95 134.38 166.48 198.33 208.62 170.75 143.10 122.18 92.95 13.70
32 4.15 10.01 19.47 23.20 28.74 37.88 55.90 73.68 108.75 143.34 177.58 211.55 229.83 188.11 157.65 134.60 102.39
35 4.54 10.95 21.30 25.37 31.43 41.43 61.14 80.59 118.94 156.78 194.23 231.38 262.89 215.17 180.33 153.97 117.13

Maintenance
Reduced
40 5.19 12.51 24.34 28.99 35.92 47.35 69.88 92.11 135.94 179.17 221.98 264.44 306.61 262.89 220.32 176.66
45 5.84 14.08 27.38 32.62 40.41 53.27 78.61 103.62 152.93 201.57 249.72 297.49 344.94 313.69 213.33 49.79
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x

Attachments
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#120 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 10 25 50 60 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,700
11 1.07 2.57 4.99 5.94 7.37 9.71 14.33 18.89 27.87 36.74 45.52 43.53 34.54 28.27 23.69 20.23 15.39 12.21 9.99 8.37 7.15 6.20 5.44 4.56
12 1.16 2.80 5.44 6.49 8.04 10.59 15.63 20.60 30.41 40.08 49.66 49.60 39.36 32.21 26.99 23.05 17.53 13.91 11.39 9.54 8.15 7.06 6.20 5.20
13 1.26 3.03 5.90 7.02 8.70 11.48 16.93 22.32 32.95 43.42 53.79 55.92 44.38 36.32 30.44 25.99 19.77 15.69 12.84 10.76 9.19 7.96 6.99
14 1.36 3.27 6.35 7.57 9.37 12.36 18.24 24.04 35.48 46.76 57.93 62.50 49.60 40.60 34.02 29.05 22.10 17.53 14.35 12.03 10.27 8.90 7.81

Horsepower
15 1.45 3.50 6.81 8.11 10.04 13.24 19.54 25.76 38.02 50.10 62.07 69.31 55.00 45.02 37.72 32.21 24.50 19.45 15.91 13.34 11.39 9.87

Tables
16 1.55 3.73 7.26 8.65 10.72 14.12 20.84 27.47 40.54 53.44 66.21 76.35 60.60 49.60 41.57 35.49 26.99 21.42 17.53 14.70 12.55 10.87
17 1.65 3.97 7.71 9.19 11.39 15.00 22.15 29.19 43.08 56.79 70.35 83.62 66.36 54.32 45.52 38.87 29.57 23.46 19.20 16.09 13.74
18 1.74 4.20 8.17 9.73 12.05 15.89 23.45 30.91 45.61 60.13 74.49 88.74 72.30 59.18 49.60 42.34 32.21 25.56 20.92 17.53 14.97
19 1.84 4.43 8.62 10.27 12.72 16.77 24.75 32.62 48.15 63.47 78.63 93.67 78.41 64.17 53.79 45.92 34.94 27.73 22.69 19.02 0.60
20 1.94 4.67 9.08 10.81 13.39 17.65 26.05 34.34 50.69 66.81 82.77 98.60 84.68 69.31 58.08 49.60 37.72 29.94 24.50 20.54

Components
Chain
21 2.04 4.90 9.53 11.35 14.06 18.54 27.36 36.06 53.22 70.15 86.90 103.53 91.11 74.57 62.50 53.36 40.60 32.21 26.37 20.48
22 2.13 5.13 9.98 11.89 14.74 19.42 28.66 37.78 55.75 73.49 91.04 108.45 97.69 79.96 67.02 57.22 43.53 34.54 28.27
23 2.23 5.36 10.44 12.43 15.40 20.30 29.96 39.49 58.28 76.82 95.18 113.38 104.43 85.47 71.63 61.16 46.52 36.92 30.22
24 2.32 5.60 10.89 12.98 16.07 21.19 31.27 41.21 60.82 80.16 99.32 118.31 111.32 91.11 76.35 65.20 49.60 39.36 32.21
25 2.42 5.83 11.34 13.51 16.74 22.07 32.56 42.93 63.35 83.50 103.46 123.24 118.34 96.87 81.18 69.31 52.73 41.84 13.70
Troubleshooting

26 2.51 6.06 11.80 14.06 17.41 22.95 33.87 44.65 65.89 86.84 107.60 128.17 125.52 102.74 86.10 73.51 55.92 44.38
Tools,

28 2.71 6.53 12.71 15.14 18.75 24.71 36.48 48.08 70.95 93.53 115.87 138.04 140.27 114.82 96.22 82.15 62.50 49.60
30 2.90 6.99 13.61 16.22 20.09 26.48 39.08 51.51 76.02 100.21 124.14 147.89 155.57 127.33 106.71 91.11 69.31 10.22
32 3.09 7.46 14.52 17.30 21.43 28.25 41.68 54.94 81.09 106.89 132.42 157.75 171.38 140.27 117.56 100.37 76.35
35 3.39 8.17 15.88 18.92 23.44 30.89 45.59 60.10 88.69 116.91 144.84 172.54 196.04 160.45 134.47 114.82 87.34

40 3.87 9.33 18.15 21.62 26.79 35.31 52.11 68.69 101.37 133.61 165.53 197.19 228.64 196.04 164.29 131.74
Information
Ordering

45 4.35 10.50 20.42 24.32 30.13 39.72 58.62 77.27 114.04 150.31 186.22 221.84 257.22 233.92 159.08 37.13
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 61

 Diamond
Chain

Standard Series Horsepower Tables

#140 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 5 10 25 50 53 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400
11 1.14 2.21 5.32 10.36 10.95 15.28 20.15 29.73 39.19 57.84 76.24 86.80 66.03 52.40 42.89 35.94 30.69 23.35 18.53 15.16 12.71 10.85 9.40 8.25
12 1.24 2.41 5.81 11.30 11.95 16.67 21.98 32.44 42.75 63.10 83.17 98.90 75.24 59.70 48.87 40.95 34.97 26.60 21.11 17.28 14.48 12.36 10.72 0.72
13 1.34 2.61 6.29 12.24 12.94 18.06 23.81 35.14 46.32 68.36 90.10 111.52 84.83 67.32 55.10 46.18 39.43 29.99 23.80 19.48 16.33 13.94 12.08
14 1.45 2.81 6.78 13.18 13.94 19.45 25.64 37.84 49.88 73.61 97.03 120.21 94.81 75.24 61.58 51.61 44.06 33.52 26.60 21.77 18.25 15.58
Selection
Guide

15 1.55 3.01 7.26 14.12 14.93 20.84 27.47 40.54 53.44 78.87 103.96 128.79 105.15 83.44 68.29 57.23 48.87 37.17 29.50 24.15 20.24 17.28

16 1.65 3.21 7.74 15.06 15.93 22.23 29.30 43.25 57.00 84.13 110.89 137.38 115.83 91.92 75.24 63.05 53.83 40.95 32.50 26.60 22.29
17 1.75 3.41 8.23 16.00 16.93 23.62 31.13 45.95 60.57 89.39 117.82 145.97 126.86 100.67 82.40 69.05 58.96 44.85 35.59 29.13 24.41
18 1.86 3.61 8.71 16.95 17.92 25.01 32.97 48.65 64.13 94.65 124.75 154.55 138.22 109.68 89.77 75.24 64.24 48.87 38.78 31.74
19 1.96 3.82 9.20 17.89 18.92 26.40 34.80 51.36 67.69 99.90 131.68 163.14 149.89 118.95 97.36 81.59 69.66 53.00 42.06 34.42
20 2.06 4.02 9.68 18.83 19.91 27.79 36.63 54.06 71.25 105.16 138.61 171.73 161.88 128.46 105.15 88.12 75.24 57.23 45.42 35.82
Carbon
Steel

21 2.17 4.22 10.16 19.77 20.91 29.18 38.46 56.76 74.82 110.42 145.54 180.31 174.17 138.22 113.13 94.81 80.95 61.58 48.87
22 2.27 4.42 10.65 20.71 21.90 30.57 40.29 59.47 78.38 115.68 152.47 188.90 186.76 148.21 121.30 101.66 86.80 66.03 52.40
23 2.37 4.62 11.13 21.65 22.90 31.96 42.12 62.17 81.94 120.94 159.40 197.48 199.64 158.43 129.67 108.67 92.78 70.58 56.01
24 2.48 4.82 11.62 22.60 23.90 33.35 43.95 64.87 85.51 126.20 166.33 206.07 212.80 168.87 138.22 115.83 98.90 75.24 37.90
25 2.58 5.02 12.10 23.54 24.89 34.74 45.79 67.57 89.07 131.45 173.27 214.66 226.24 179.53 146.94 123.15 105.15 79.99
& Moisture
Corrosion
Resistant

26 2.68 5.22 12.58 24.48 25.89 36.13 47.62 70.28 92.63 136.71 180.20 223.24 239.95 190.41 155.85 130.61 111.52 84.83
28 2.89 5.62 13.55 26.36 27.88 38.91 51.28 75.68 99.76 147.23 194.06 240.42 268.16 212.80 174.17 145.97 124.63 94.81
30 3.10 6.02 14.52 28.24 29.87 41.68 54.94 81.09 106.88 157.74 207.92 257.59 297.40 236.00 193.16 161.88 138.22 18.64
32 3.30 6.43 15.49 30.13 31.86 44.46 58.61 86.50 114.01 168.26 221.78 274.76 327.63 259.99 212.80 178.34 152.27
35 3.61 7.03 16.94 32.95 34.85 48.63 64.10 94.60 124.70 184.03 242.57 300.52 358.00 297.40 243.41 203.99 135.27
Maintenance
Reduced

40 4.13 8.03 19.36 37.66 39.83 55.58 73.26 108.12 142.51 210.33 277.22 343.45 409.15 363.35 297.40 153.78
45 4.65 9.04 21.78 42.37 44.80 62.53 82.42 121.63 160.32 236.62 311.88 386.38 460.29 433.56 221.34
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
Attachments

4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#140 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 5 10 25 50 53 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400
11 0.85 1.65 3.97 7.73 8.17 11.39 15.03 22.17 29.22 43.13 56.85 64.73 49.24 39.07 31.98 26.80 22.89 17.41 13.82 11.30 9.48 8.09 7.01 6.15
12 0.92 1.80 4.33 8.43 8.91 12.43 16.39 24.19 31.88 47.05 62.02 73.75 56.11 44.52 36.44 30.54 26.08 19.84 15.74 12.89 10.80 9.22 7.99 0.54
13 1.00 1.95 4.69 9.13 9.65 13.47 17.76 26.20 34.54 50.98 67.19 83.16 63.26 50.20 41.09 34.44 29.40 22.36 17.75 14.53 12.18 10.40 9.01
14 1.08 2.10 5.06 9.83 10.40 14.50 19.12 28.22 37.20 54.89 72.36 89.64 70.70 56.11 45.92 38.49 32.86 25.00 19.84 16.23 13.61 11.62
Horsepower

15 1.16 2.24 5.41 10.53 11.13 15.54 20.48 30.23 39.85 58.81 77.52 96.04 78.41 62.22 50.92 42.68 36.44 27.72 22.00 18.01 15.09 12.89
Tables

16 1.23 2.39 5.77 11.23 11.88 16.58 21.85 32.25 42.50 62.74 82.69 102.44 86.37 68.54 56.11 47.02 40.14 30.54 24.24 19.84 16.62
17 1.30 2.54 6.14 11.93 12.62 17.61 23.21 34.26 45.17 66.66 87.86 108.85 94.60 75.07 61.45 51.49 43.97 33.44 26.54 21.72 18.20
18 1.39 2.69 6.50 12.64 13.36 18.65 24.59 36.28 47.82 70.58 93.03 115.25 103.07 81.79 66.94 56.11 47.90 36.44 28.92 23.67
19 1.46 2.85 6.86 13.34 14.11 19.69 25.95 38.30 50.48 74.50 98.19 121.65 111.77 88.70 72.60 60.84 51.95 39.52 31.36 25.67
20 1.54 3.00 7.22 14.04 14.85 20.72 27.31 40.31 53.13 78.42 103.36 128.06 120.71 95.79 78.41 65.71 56.11 42.68 33.87 26.71
Components
Chain

21 1.62 3.15 7.58 14.74 15.59 21.76 28.68 42.33 55.79 82.34 108.53 134.46 129.88 103.07 84.36 70.70 60.36 45.92 36.44
22 1.69 3.30 7.94 15.44 16.33 22.80 30.04 44.35 58.45 86.26 113.70 140.86 139.27 110.52 90.45 75.81 64.73 49.24 39.07
23 1.77 3.45 8.30 16.14 17.08 23.83 31.41 46.36 61.10 90.18 118.86 147.26 148.87 118.14 96.69 81.04 69.19 52.63 41.77
24 1.85 3.59 8.67 16.85 17.82 24.87 32.77 48.37 63.76 94.11 124.03 153.67 158.68 125.93 103.07 86.37 73.75 56.11 28.26
25 1.92 3.74 9.02 17.55 18.56 25.91 34.15 50.39 66.42 98.02 129.21 160.07 168.71 133.88 109.57 91.83 78.41 59.65
Troubleshooting

26 2.00 3.89 9.38 18.25 19.31 26.94 35.51 52.41 69.07 101.94 134.38 166.47 178.93 141.99 116.22 97.40 83.16 63.26
Tools,

28 2.16 4.19 10.10 19.66 20.79 29.02 38.24 56.43 74.39 109.79 144.71 179.28 199.97 158.68 129.88 108.85 92.94 70.70
30 2.31 4.49 10.83 21.06 22.27 31.08 40.97 60.47 79.70 117.63 155.05 192.08 221.77 175.99 144.04 120.71 103.07 13.90
32 2.46 4.79 11.55 22.47 23.76 33.15 43.71 64.50 85.02 125.47 165.38 204.89 244.31 193.87 158.68 132.99 113.55
35 2.69 5.24 12.63 24.57 25.99 36.26 47.80 70.54 92.99 137.23 180.88 224.10 266.96 221.77 181.51 152.12 100.87

40 3.08 5.99 14.44 28.08 29.70 41.45 54.63 80.63 106.27 156.84 206.72 256.11 305.10 270.95 221.77 114.67
Information
Ordering

45 3.47 6.74 16.24 31.60 33.41 46.63 61.46 90.70 119.55 176.45 232.57 288.12 343.24 323.31 165.05
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

62 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
#160 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 5 10 25 47 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,200
11 1.65 3.20 7.72 14.16 15.02 22.17 29.23 43.14 56.86 83.91 110.60 96.58 73.47 58.31 47.72 39.99 34.15 29.60 25.98 20.61 16.87 14.14 12.07 10.46
12 1.80 3.50 8.43 15.45 16.39 24.19 31.88 47.06 62.03 91.54 120.66 110.05 83.72 66.44 54.38 45.57 38.91 33.73 29.60 23.49 19.22 16.11 13.76
13 1.95 3.79 9.13 16.73 17.76 26.21 34.54 50.98 67.19 99.17 130.71 124.09 94.40 74.91 61.31 51.38 43.87 38.03 33.37 26.48 21.68 18.17
14 2.10 4.08 9.83 18.02 19.12 28.22 37.20 54.90 72.36 106.80 140.77 138.68 105.50 83.72 68.52 57.43 49.03 42.50 37.30 29.60 24.23 20.30

Selection
Guide
15 2.25 4.37 10.53 19.31 20.49 30.24 39.86 58.82 77.53 114.43 150.82 153.80 117.00 92.85 75.99 63.69 54.38 47.13 41.37 32.83 26.87

16 2.40 4.66 11.23 20.59 21.85 32.25 42.51 62.74 82.70 122.05 160.88 169.43 128.89 102.28 83.72 70.16 59.90 51.92 45.57 36.16 29.60
17 2.55 4.95 11.94 21.88 23.22 34.27 45.17 66.66 87.87 129.68 170.93 185.56 141.16 112.02 91.69 76.84 65.61 56.87 49.91 39.61 24.21
18 2.70 5.24 12.64 23.17 24.59 36.29 47.83 70.59 93.04 137.31 180.99 202.17 153.80 122.05 99.90 83.72 71.48 61.96 54.38 43.15
19 2.85 5.54 13.34 24.45 25.95 38.30 50.48 74.51 98.21 144.94 191.04 219.25 166.79 132.36 108.33 90.79 77.52 67.19 58.97 46.80
20 3.00 5.83 14.04 25.74 27.32 40.32 53.14 78.43 103.38 152.57 201.10 236.79 180.13 142.95 117.00 98.05 83.72 72.57 63.69 46.79

Carbon
Steel
21 3.15 6.12 14.74 27.03 28.68 42.33 55.80 82.35 108.54 160.20 211.15 254.77 193.81 153.80 125.88 105.50 90.07 78.08 68.52
22 3.29 6.41 15.45 28.32 30.05 44.35 58.45 86.27 113.71 167.83 221.21 273.18 207.82 164.91 134.98 113.12 96.58 83.72 73.47
23 3.44 6.70 16.15 29.60 31.42 46.36 61.11 90.19 118.88 175.45 231.26 286.51 222.15 176.29 144.29 120.92 103.24 89.49 78.54
24 3.59 6.99 16.85 30.89 32.78 48.38 63.77 94.11 124.05 183.08 241.32 298.97 236.79 187.91 153.80 128.89 110.05 95.39 83.72
25 3.74 7.28 17.55 32.18 34.15 50.40 66.43 98.04 129.22 190.71 251.37 311.42 251.74 199.77 163.51 137.03 117.00 101.41 32.66

& Moisture
Corrosion

Resistant
26 3.89 7.57 18.26 33.46 35.51 52.41 69.08 101.96 134.39 198.34 261.43 323.88 267.00 211.88 173.42 145.33 124.09 107.56
28 4.19 8.16 19.66 36.04 38.24 56.44 74.40 109.80 144.73 213.60 281.54 348.79 298.39 236.79 193.81 162.42 138.68 36.88
30 4.49 8.74 21.06 38.61 40.98 60.48 79.71 117.64 155.06 228.85 301.65 373.71 330.92 262.61 214.94 180.13 126.46
32 4.79 9.32 22.47 41.19 43.71 64.51 85.03 125.49 165.40 244.11 321.76 398.62 364.56 289.30 236.79 198.44 22.58
35 5.24 10.20 24.57 45.05 47.81 70.55 93.00 137.25 180.91 266.99 351.92 435.99 417.01 330.92 270.86 112.60

Maintenance
Reduced
40 5.99 11.65 28.09 51.48 54.63 80.63 106.28 156.86 206.75 305.14 402.19 498.28 509.49 404.31 160.63
45 6.74 13.11 31.60 57.92 61.46 90.71 119.57 176.47 232.59 343.28 452.47 560.56 607.95 289.10
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x

Attachments
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#160 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 5 10 25 47 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,200
11 1.23 2.39 5.76 10.56 11.20 16.53 21.80 32.17 42.40 62.57 82.47 72.02 54.79 43.48 35.58 29.82 25.47 22.07 19.37 15.37 12.58 10.54 9.00 7.80
12 1.34 2.61 6.29 11.52 12.22 18.04 23.77 35.09 46.26 68.26 89.98 82.06 62.43 49.54 40.55 33.98 29.02 25.15 22.07 17.52 14.33 12.01 10.26
13 1.45 2.83 6.81 12.48 13.24 19.54 25.76 38.02 50.10 73.95 97.47 92.53 70.39 55.86 45.72 38.31 32.71 28.36 24.88 19.75 16.17 13.55
14 1.57 3.04 7.33 13.44 14.26 21.04 27.74 40.94 53.96 79.64 104.97 103.41 78.67 62.43 51.10 42.83 36.56 31.69 27.81 22.07 18.07 15.14

Horsepower
15 1.68 3.26 7.85 14.40 15.28 22.55 29.72 43.86 57.81 85.33 112.47 114.69 87.25 69.24 56.67 47.49 40.55 35.14 30.85 24.48 20.04

Tables
16 1.79 3.47 8.37 15.35 16.29 24.05 31.70 46.79 61.67 91.01 119.97 126.34 96.11 76.27 62.43 52.32 44.67 38.72 33.98 26.96 22.07
17 1.90 3.69 8.90 16.32 17.32 25.56 33.68 49.71 65.52 96.70 127.46 138.37 105.26 83.53 68.37 57.30 48.93 42.41 37.22 29.54 18.05
18 2.01 3.91 9.43 17.28 18.34 27.06 35.67 52.64 69.38 102.39 134.96 150.76 114.69 91.01 74.50 62.43 53.30 46.20 40.55 32.18
19 2.13 4.13 9.95 18.23 19.35 28.56 37.64 55.56 73.24 108.08 142.46 163.49 124.38 98.70 80.78 67.70 57.81 50.10 43.97 34.90
20 2.24 4.35 10.47 19.19 20.37 30.07 39.63 58.49 77.09 113.77 149.96 176.57 134.32 106.60 87.25 73.12 62.43 54.12 47.49 34.89

Components
Chain
21 2.35 4.56 10.99 20.16 21.39 31.57 41.61 61.41 80.94 119.46 157.45 189.98 144.52 114.69 93.87 78.67 67.17 58.22 51.10
22 2.45 4.78 11.52 21.12 22.41 33.07 43.59 64.33 84.79 125.15 164.96 203.71 154.97 122.97 100.65 84.35 72.02 62.43 54.79
23 2.57 5.00 12.04 22.07 23.43 34.57 45.57 67.25 88.65 130.83 172.45 213.65 165.66 131.46 107.60 90.17 76.99 66.73 58.57
24 2.68 5.21 12.57 23.03 24.44 36.08 47.55 70.18 92.50 136.52 179.95 222.94 176.57 140.12 114.69 96.11 82.06 71.13 62.43
25 2.79 5.43 13.09 24.00 25.47 37.58 49.54 73.11 96.36 142.21 187.45 232.23 187.72 148.97 121.93 102.18 87.25 75.62 24.35
Troubleshooting

26 2.90 5.64 13.62 24.95 26.48 39.08 51.51 76.03 100.21 147.90 194.95 241.52 199.10 158.00 129.32 108.37 92.53 80.21
Tools,

28 3.12 6.08 14.66 26.88 28.52 42.09 55.48 81.88 107.93 159.28 209.94 260.09 222.51 176.57 144.52 121.12 103.41 27.50
30 3.35 6.52 15.70 28.79 30.56 45.10 59.44 87.72 115.63 170.65 224.94 278.68 246.77 195.83 160.28 134.32 94.30
32 3.57 6.95 16.76 30.72 32.59 48.11 63.41 93.58 123.34 182.03 239.94 297.25 271.85 215.73 176.57 147.98 16.84
35 3.91 7.61 18.32 33.59 35.65 52.61 69.35 102.35 134.90 199.09 262.43 325.12 310.96 246.77 201.98 83.97

40 4.47 8.69 20.95 38.39 40.74 60.13 79.25 116.97 154.17 227.54 299.91 371.57 379.93 301.49 119.78
Information
Ordering

45 5.03 9.78 23.56 43.19 45.83 67.64 89.16 131.59 173.44 255.98 337.41 418.01 453.35 215.58
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the
2 strands: 1.7x shaded area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 63

 Diamond
Chain

Standard Series Horsepower Tables

#180 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 2 5 10 25 43 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800
11 0.94 2.27 4.43 10.66 17.95 20.75 30.62 40.36 59.56 78.51 115.87 148.32 106.13 80.73 64.07 52.44 43.95 37.52 32.52 28.54 22.65 18.54 15.54
12 1.03 2.48 4.83 11.63 19.58 22.63 33.40 44.03 64.98 85.64 126.40 166.61 120.92 91.99 73.00 59.75 50.07 42.75 37.06 32.52 25.81 21.12 17.70
13 1.12 2.69 5.23 12.60 21.21 24.52 36.19 47.70 70.39 92.78 136.93 180.49 136.35 103.72 82.31 67.37 56.46 48.21 41.79 36.67 29.10 23.82
14 1.20 2.90 5.63 13.57 22.84 26.40 38.97 51.36 75.81 99.92 147.47 194.37 152.38 115.92 91.99 75.29 63.10 53.87 46.70 40.98 32.52 26.62
Selection
Guide

15 1.29 3.10 6.03 14.54 24.48 28.29 41.75 55.03 81.22 107.06 158.00 208.26 169.00 128.56 102.02 83.50 69.98 59.75 51.79 45.45 36.07

16 1.37 3.31 6.44 15.51 26.11 30.18 44.54 58.70 86.64 114.19 168.53 222.14 186.17 141.63 112.39 91.99 77.09 65.82 57.05 50.07 39.74
17 1.46 3.52 6.84 16.48 27.74 32.06 47.32 62.37 92.05 121.33 179.07 236.02 203.90 155.11 123.09 100.75 84.43 72.09 62.49 54.84 43.52
18 1.54 3.72 7.24 17.45 29.37 33.95 50.10 66.04 97.47 128.47 189.60 249.91 222.15 169.00 134.11 109.77 91.99 78.54 68.08 59.75
19 1.63 3.93 7.64 18.42 31.00 35.83 52.89 69.71 102.88 135.60 200.13 263.79 240.92 183.27 145.44 119.04 99.76 85.18 73.83 64.80
20 1.72 4.14 8.05 19.39 32.64 37.72 55.67 73.38 108.30 142.74 210.67 277.68 260.19 197.93 157.07 128.56 107.74 91.99 79.74 69.98
Carbon
Steel

21 1.80 4.34 8.45 20.36 34.27 39.61 58.45 77.05 113.71 149.88 221.20 291.56 279.94 212.96 169.00 138.32 115.92 98.97 85.79 75.29
22 1.89 4.55 8.85 21.33 35.90 41.49 61.24 80.71 119.12 157.02 231.73 305.44 300.17 228.35 181.21 148.32 124.30 106.13 91.99
23 1.97 4.76 9.25 22.30 37.53 43.38 64.02 84.38 124.54 164.15 242.27 319.33 320.87 244.10 193.70 158.54 132.87 113.45 98.33
24 2.06 4.96 9.65 23.27 39.16 45.26 66.80 88.05 129.95 171.29 252.80 333.21 342.02 260.19 206.47 169.00 141.63 120.92 40.34
25 2.15 5.17 10.06 24.24 40.79 47.15 69.59 91.72 135.37 178.43 263.33 347.10 363.62 276.62 219.51 179.67 150.57 128.56
& Moisture
Corrosion
Resistant

26 2.23 5.38 10.46 25.21 42.43 49.04 72.37 95.39 140.78 185.56 273.87 360.98 385.66 293.38 232.81 190.55 159.69 122.43
28 2.40 5.79 11.26 27.15 45.69 52.81 77.94 102.73 151.61 199.84 294.93 388.75 431.00 327.87 260.19 212.96 178.47
30 2.57 6.20 12.07 29.09 48.95 56.58 83.50 110.07 162.44 214.11 316.00 416.51 477.99 363.62 288.56 236.18 128.92
32 2.75 6.62 12.87 31.02 52.22 60.35 89.07 117.40 173.27 228.39 337.07 444.28 526.58 400.58 317.89 260.19
35 3.00 7.24 14.08 33.93 57.11 66.01 97.42 128.41 189.52 249.80 368.67 485.93 602.34 458.22 363.62 142.51
Maintenance
Reduced

40 3.43 8.27 16.09 38.78 65.27 75.44 111.34 146.75 216.59 285.48 421.34 555.35 688.02 559.83 254.20
45 3.86 9.31 18.10 43.63 73.43 84.87 125.26 165.10 243.66 321.17 474.00 624.77 774.03 480.00
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded
2 strands: 1.7x area
3 strands: 2.5x
Attachments

4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#180 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 2 5 10 25 43 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800
11 0.70 1.69 3.30 7.95 13.39 15.47 22.83 30.10 44.41 58.54 86.40 110.60 79.14 60.20 47.78 39.10 32.77 27.98 24.25 21.28 16.89 13.83 11.59
12 0.77 1.85 3.60 8.67 14.60 16.88 24.91 32.83 48.46 63.86 94.26 124.24 90.17 68.60 54.44 44.56 37.34 31.88 27.64 24.25 19.25 15.75 13.20
13 0.84 2.01 3.90 9.40 15.82 18.28 26.99 35.57 52.49 69.19 102.11 134.59 101.68 77.34 61.38 50.24 42.10 35.95 31.16 27.34 21.70 17.76
14 0.89 2.16 4.20 10.12 17.03 19.69 29.06 38.30 56.53 74.51 109.97 144.94 113.63 86.44 68.60 56.14 47.05 40.17 34.82 30.56 24.25 19.85
Horsepower

15 0.96 2.31 4.50 10.84 18.25 21.10 31.13 41.04 60.57 79.83 117.82 155.30 126.02 95.87 76.08 62.27 52.18 44.56 38.62 33.89 26.90
Tables

16 1.02 2.47 4.80 11.57 19.47 22.51 33.21 43.77 64.61 85.15 125.67 165.65 138.83 105.61 83.81 68.60 57.49 49.08 42.54 37.34 29.63
17 1.09 2.62 5.10 12.29 20.69 23.91 35.29 46.51 68.64 90.48 133.53 176.00 152.05 115.67 91.79 75.13 62.96 53.76 46.60 40.89 32.45
18 1.15 2.77 5.40 13.01 21.90 25.32 37.36 49.25 72.68 95.80 141.38 186.36 165.66 126.02 100.01 81.86 68.60 58.57 50.77 44.56
19 1.22 2.93 5.70 13.74 23.12 26.72 39.44 51.98 76.72 101.12 149.24 196.71 179.65 136.66 108.45 88.77 74.39 63.52 55.06 48.32
20 1.28 3.09 6.00 14.46 24.34 28.13 41.51 54.72 80.76 106.44 157.10 207.07 194.02 147.60 117.13 95.87 80.34 68.60 59.46 52.18
Components
Chain

21 1.34 3.24 6.30 15.18 25.56 29.54 43.59 57.46 84.79 111.77 164.95 217.42 208.75 158.80 126.02 103.15 86.44 73.80 63.97 56.14
22 1.41 3.39 6.60 15.91 26.77 30.94 45.67 60.19 88.83 117.09 172.80 227.77 223.84 170.28 135.13 110.60 92.69 79.14 68.60
23 1.47 3.55 6.90 16.63 27.99 32.35 47.74 62.92 92.87 122.41 180.66 238.12 239.27 182.03 144.44 118.22 99.08 84.60 73.32
24 1.54 3.70 7.20 17.35 29.20 33.75 49.81 65.66 96.90 127.73 188.51 248.47 255.04 194.02 153.96 126.02 105.61 90.17 30.08
25 1.60 3.86 7.50 18.08 30.42 35.16 51.89 68.40 100.95 133.06 196.37 258.83 271.15 206.28 163.69 133.98 112.28 95.87
Troubleshooting

26 1.66 4.01 7.80 18.80 31.64 36.57 53.97 71.13 104.98 138.37 204.22 269.18 287.59 218.77 173.61 142.09 119.08 91.30
Tools,

28 1.79 4.32 8.40 20.25 34.07 39.38 58.12 76.61 113.06 149.02 219.93 289.89 321.40 244.49 194.02 158.80 133.09
30 1.92 4.62 9.00 21.69 36.50 42.19 62.27 82.08 121.13 159.66 235.64 310.59 356.44 271.15 215.18 176.12 96.14
32 2.05 4.94 9.60 23.13 38.94 45.00 66.42 87.55 129.21 170.31 251.35 331.30 392.67 298.71 237.05 194.02
35 2.24 5.40 10.50 25.30 42.59 49.22 72.65 95.76 141.33 186.28 274.92 362.36 449.16 341.69 271.15 106.27

40 2.56 6.17 12.00 28.92 48.67 56.26 83.03 109.43 161.51 212.88 314.19 414.12 513.06 417.47 189.56
Information
Ordering

45 2.88 6.94 13.50 32.53 54.76 63.29 93.41 123.12 181.70 239.50 353.46 465.89 577.19 357.94
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded
2 strands: 1.7x area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

64 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Series Horsepower Tables
#200 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 2 5 10 25 40 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600
11 1.25 3.02 5.88 14.16 22.23 27.54 40.65 53.58 79.08 104.24 129.14 153.84 161.36 115.46 87.83 69.70 57.05 47.81 40.82 35.38 31.05 24.64 20.17
12 1.37 3.29 6.41 15.45 24.25 30.05 44.35 58.45 86.27 113.71 140.88 167.82 183.86 131.56 100.08 79.42 65.00 54.48 46.51 40.32 35.38 28.08 22.98
13 1.48 3.57 6.94 16.73 26.28 32.55 48.04 63.33 93.46 123.19 152.62 181.81 207.31 148.34 112.85 89.55 73.30 61.43 52.45 45.46 39.90 31.66
14 1.59 3.84 7.48 18.02 28.30 35.06 51.74 68.20 100.65 132.66 164.36 195.79 231.69 165.78 126.11 100.08 81.91 68.65 58.61 50.80 44.59 35.38

Selection
Guide
15 1.71 4.12 8.01 19.31 30.32 37.56 55.43 73.07 107.84 142.14 176.09 209.78 256.95 183.86 139.87 110.99 90.85 76.13 65.00 56.34 49.45 37.46

16 1.82 4.39 8.55 20.60 32.34 40.06 59.13 77.94 115.03 151.61 187.83 223.76 283.07 202.55 154.08 122.27 100.08 83.87 71.61 62.07 54.48
17 1.94 4.67 9.08 21.88 34.36 42.57 62.83 82.81 122.22 161.09 199.57 237.75 310.02 221.83 168.75 133.91 109.61 91.86 78.43 67.98 59.66
18 2.05 4.94 9.61 23.17 36.38 45.07 66.52 87.68 129.41 170.57 211.31 251.73 331.81 241.69 183.86 145.90 119.42 100.08 85.45 74.07 65.00
19 2.16 5.22 10.15 24.46 38.40 47.58 70.22 92.55 136.59 180.04 223.05 265.72 350.24 262.11 199.39 158.23 129.51 108.53 92.67 80.32 2.22
20 2.28 5.49 10.68 25.74 40.42 50.08 73.91 97.42 143.78 189.52 234.79 279.70 368.67 283.07 215.34 170.88 139.87 117.21 100.08 86.75

Carbon
Steel
21 2.39 5.77 11.22 27.03 42.45 52.59 77.61 102.29 150.97 198.99 246.53 293.69 387.11 304.56 231.69 183.86 150.49 126.11 107.68 32.68
22 2.51 6.04 11.75 28.32 44.47 55.09 81.30 107.17 158.16 208.47 258.27 307.68 405.54 326.57 248.43 197.15 161.36 135.23 115.46
23 2.62 6.31 12.28 29.61 46.49 57.59 85.00 112.04 165.35 217.95 270.01 321.66 423.97 349.09 265.56 210.74 172.49 144.55 104.48
24 2.73 6.59 12.82 30.89 48.51 60.10 88.70 116.91 172.54 227.42 281.75 335.65 442.41 372.10 283.07 224.63 183.86 154.08 21.71
25 2.85 6.86 13.35 32.18 50.53 62.60 92.39 121.78 179.73 236.90 293.49 349.63 460.84 395.60 300.94 238.82 195.47 163.81

& Moisture
Corrosion

Resistant
26 2.96 7.14 13.89 33.47 52.55 65.11 96.09 126.65 186.92 246.37 305.23 363.62 479.27 419.57 319.18 253.29 207.31 151.14
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded
2 strands: 1.7x area
3 strands: 2.5x

Maintenance
4 strands: 3.3x

Reduced
5 strands or more: please contact Diamond Chain technical support

Attachments
#200 Roller Chain - Metric Units (Kilowatts)
# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 2 5 10 25 40 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600
11 0.93 2.25 4.38 10.56 16.58 20.54 30.31 39.95 58.97 77.73 96.30 114.72 120.33 86.10 65.49 51.98 42.54 35.65 30.44 26.38 23.15 18.37 15.04
12 1.02 2.45 4.78 11.52 18.08 22.41 33.07 43.59 64.33 84.79 105.05 125.14 137.10 98.10 74.63 59.22 48.47 40.63 34.68 30.07 26.38 20.94 17.14
13 1.10 2.66 5.18 12.48 19.60 24.27 35.82 47.23 69.69 91.86 113.81 135.58 154.59 110.62 84.15 66.78 54.66 45.81 39.11 33.90 29.75 23.61
14 1.19 2.86 5.58 13.44 21.10 26.14 38.58 50.86 75.05 98.92 122.56 146.00 172.77 123.62 94.04 74.63 61.08 51.19 43.71 37.88 33.25 26.38

Horsepower
15 1.28 3.07 5.97 14.40 22.61 28.01 41.33 54.49 80.42 105.99 131.31 156.43 191.61 137.10 104.30 82.77 67.75 56.77 48.47 42.01 36.87 27.93

Tables
16 1.36 3.27 6.38 15.36 24.12 29.87 44.09 58.12 85.78 113.06 140.06 166.86 211.09 151.04 114.90 91.18 74.63 62.54 53.40 46.29 40.63
17 1.45 3.48 6.77 16.32 25.62 31.74 46.85 61.75 91.14 120.12 148.82 177.29 231.18 165.42 125.84 99.86 81.74 68.50 58.49 50.69 44.49
18 1.53 3.68 7.17 17.28 27.13 33.61 49.60 65.38 96.50 127.19 157.57 187.72 247.43 180.23 137.10 108.80 89.05 74.63 63.72 55.23 48.47
19 1.61 3.89 7.57 18.24 28.63 35.48 52.36 69.01 101.86 134.26 166.33 198.15 261.17 195.46 148.69 117.99 96.58 80.93 69.10 59.89 1.66
20 1.70 4.09 7.96 19.19 30.14 37.34 55.11 72.65 107.22 141.33 175.08 208.57 274.92 211.09 160.58 127.43 104.30 87.40 74.63 64.69

Components
Chain
21 1.78 4.30 8.37 20.16 31.65 39.22 57.87 76.28 112.58 148.39 183.84 219.00 288.67 227.11 172.77 137.10 112.22 94.04 80.30 24.37
22 1.87 4.50 8.76 21.12 33.16 41.08 60.63 79.92 117.94 155.46 192.59 229.44 302.41 243.52 185.25 147.01 120.33 100.84 86.10
23 1.95 4.71 9.16 22.08 34.67 42.94 63.38 83.55 123.30 162.53 201.35 239.86 316.15 260.32 198.03 157.15 128.63 107.79 77.91
24 2.04 4.91 9.56 23.03 36.17 44.82 66.14 87.18 128.66 169.59 210.10 250.29 329.91 277.47 211.09 167.51 137.10 114.90 16.19
25 2.13 5.12 9.96 24.00 37.68 46.68 68.90 90.81 134.02 176.66 218.86 260.72 343.65 295.00 224.41 178.09 145.76 122.15
Troubleshooting

26 2.21 5.32 10.36 24.96 39.19 48.55 71.65 94.44 139.39 183.72 227.61 271.15 357.39 312.87 238.01 188.88 154.59 112.71
Tools,

Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded
2 strands: 1.7x area
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 65

 Diamond
Chain

Standard Series Horsepower Tables

#240 Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 2 5 10 25 36 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400
11 2.02 4.86 9.46 22.81 32.36 44.36 65.47 86.30 127.37 167.88 207.99 247.77 186.70 133.59 101.63 80.65 66.01 55.32 47.23 40.94 35.93 31.87 28.51
12 2.20 5.31 10.32 24.88 35.31 48.40 71.43 94.15 138.95 183.14 226.89 270.30 212.73 152.22 115.80 91.89 75.21 63.03 53.82 46.65 40.94 36.31 2.11
13 2.39 5.75 11.18 26.95 38.25 52.43 77.38 101.99 150.53 198.41 245.80 292.82 239.87 171.64 130.57 103.61 84.81 71.07 60.68 52.60 46.16 38.13
14 2.57 6.19 12.04 29.02 41.19 56.46 83.33 109.84 162.11 213.67 264.71 315.34 268.07 191.82 145.92 115.80 94.78 79.43 67.82 58.78 51.59
Selection
Guide

15 2.75 6.63 12.90 31.10 44.13 60.50 89.28 117.68 173.68 228.93 283.62 337.87 297.30 212.73 161.83 128.42 105.11 88.09 75.21 65.19

16 2.94 7.08 13.76 33.17 47.08 64.53 95.24 125.53 185.26 244.19 302.53 360.39 327.52 234.35 178.28 141.47 115.80 97.04 82.86 71.82
17 3.12 7.52 14.62 35.24 50.02 68.56 101.19 133.37 196.84 259.45 321.43 382.92 358.70 256.66 195.25 154.94 126.82 106.28 90.74
18 3.30 7.96 15.48 37.32 52.96 72.59 107.14 141.22 208.42 274.71 340.34 405.44 390.81 279.64 212.73 168.81 138.17 115.80 98.87
19 3.49 8.40 16.34 39.39 55.90 76.63 113.09 149.06 220.00 289.98 359.25 427.97 423.82 303.26 230.70 183.08 149.84 125.58 3.20
20 3.67 8.84 17.20 41.46 58.84 80.66 119.04 156.91 231.58 305.24 378.16 450.49 457.72 327.52 249.15 197.72 161.83 135.62
Carbon
Steel

21 3.85 9.29 18.07 43.54 61.79 84.69 125.00 164.76 243.16 320.50 397.07 473.02 492.48 352.39 268.07 212.73 174.12 109.86
22 4.04 9.73 18.93 45.61 64.73 88.73 130.95 172.60 254.74 335.76 415.97 495.54 528.07 377.85 287.44 228.10 186.70
23 4.22 10.17 19.79 47.68 67.67 92.76 136.90 180.45 266.32 351.02 434.88 518.07 564.48 403.91 307.26 243.83 199.57
24 4.40 10.61 20.65 49.76 70.61 96.79 142.85 188.29 277.89 366.29 453.79 540.59 601.69 430.53 327.52 259.91 188.30
25 4.59 11.06 21.51 51.83 73.55 100.83 148.81 196.14 289.47 381.55 472.70 563.12 639.68 457.72 348.20 276.32 73.47
& Moisture
Corrosion
Resistant

26 4.77 11.50 22.37 53.90 76.50 104.86 154.76 203.98 301.05 396.81 491.61 585.64 678.45 485.46 369.30 293.06
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Maintenance
Reduced
Attachments

#240 Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 2 5 10 25 36 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400
11 1.51 3.62 7.05 17.01 24.13 33.08 48.82 64.35 94.98 125.19 155.10 184.76 139.22 99.62 75.79 60.14 49.22 41.25 35.22 30.53 26.79 23.77 21.26
12 1.64 3.96 7.70 18.55 26.33 36.09 53.27 70.21 103.62 136.57 169.19 201.56 158.63 113.51 86.35 68.52 56.08 47.00 40.13 34.79 30.53 27.08 1.57
13 1.78 4.29 8.34 20.10 28.52 39.10 57.70 76.05 112.25 147.95 183.29 218.36 178.87 127.99 97.37 77.26 63.24 53.00 45.25 39.22 34.42 28.43
14 1.92 4.62 8.98 21.64 30.72 42.10 62.14 81.91 120.89 159.33 197.39 235.15 199.90 143.04 108.81 86.35 70.68 59.23 50.57 43.83 38.47
Horsepower

15 2.05 4.94 9.62 23.19 32.91 45.11 66.58 87.75 129.51 170.71 211.50 251.95 221.70 158.63 120.68 95.76 78.38 65.69 56.08 48.61
Tables

16 2.19 5.28 10.26 24.73 35.11 48.12 71.02 93.61 138.15 182.09 225.60 268.74 244.23 174.75 132.94 105.49 86.35 72.36 61.79 53.56
17 2.33 5.61 10.90 26.28 37.30 51.13 75.46 99.45 146.78 193.47 239.69 285.54 267.48 191.39 145.60 115.54 94.57 79.25 67.66
18 2.46 5.94 11.54 27.83 39.49 54.13 79.89 105.31 155.42 204.85 253.79 302.34 291.43 208.53 158.63 125.88 103.03 86.35 73.73
19 2.60 6.26 12.18 29.37 41.68 57.14 84.33 111.15 164.05 216.24 267.89 319.14 316.04 226.14 172.03 136.52 111.74 93.65 2.39
20 2.74 6.59 12.83 30.92 43.88 60.15 88.77 117.01 172.69 227.62 281.99 335.93 341.32 244.23 185.79 147.44 120.68 101.13
Components
Chain

21 2.87 6.93 13.47 32.47 46.08 63.15 93.21 122.86 181.32 239.00 296.10 352.73 367.24 262.78 199.90 158.63 129.84 81.92
22 3.01 7.26 14.12 34.01 48.27 66.17 97.65 128.71 189.96 250.38 310.19 369.52 393.78 281.76 214.34 170.09 139.22
23 3.15 7.58 14.76 35.55 50.46 69.17 102.09 134.56 198.59 261.76 324.29 386.32 420.93 301.20 229.12 181.82 148.82
24 3.28 7.91 15.40 37.11 52.65 72.18 106.52 140.41 207.22 273.14 338.39 403.12 448.68 321.05 244.23 193.81 140.42
25 3.42 8.25 16.04 38.65 54.85 75.19 110.97 146.26 215.86 284.52 352.49 419.92 477.01 341.32 259.65 206.05 54.79
Troubleshooting

26 3.56 8.58 16.68 40.19 57.05 78.19 115.40 152.11 224.49 295.90 366.59 436.71 505.92 362.01 275.39 218.53
Tools,

Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Information
Ordering
Conditions
Terms and

66 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Heavy Series Horsepower Tables
#60H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 10 25 50 90 100 200 300 400 500 600 800 1,000 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
11 0.22 0.53 1.02 1.80 1.99 3.87 5.72 7.53 9.33 11.12 14.66 15.58 11.85 9.41 7.70 6.45 5.51 3.94 3.00 2.38 1.95 1.63 1.39 1.21
12 0.24 0.57 1.12 1.96 2.17 4.23 6.24 8.22 10.18 12.13 15.99 17.75 13.51 10.72 8.77 7.35 6.28 4.49 3.42 2.71 2.22 1.86 1.59
13 0.26 0.62 1.21 2.13 2.35 4.58 6.76 8.90 11.03 13.14 17.32 20.02 15.23 12.08 9.89 8.29 7.08 5.06 3.85 3.06 2.50 2.10 1.79
14 0.28 0.67 1.30 2.29 2.53 4.93 7.27 9.59 11.88 14.15 18.65 22.37 17.02 13.51 11.05 9.26 7.91 5.66 4.31 3.42 2.80 2.34

Selection
Guide
15 0.30 0.72 1.40 2.45 2.71 5.28 7.79 10.27 12.73 15.16 19.99 24.76 18.87 14.98 12.26 10.27 8.77 6.28 4.77 3.79 3.10 2.60

16 0.32 0.77 1.49 2.62 2.90 5.63 8.31 10.96 13.58 16.17 21.32 26.41 20.79 16.50 13.51 11.32 9.66 6.91 5.26 4.17 3.42
17 0.34 0.81 1.58 2.78 3.08 5.99 8.83 11.64 14.43 17.18 22.65 28.06 22.77 18.07 14.79 12.40 10.58 7.57 5.76 4.57 3.74
18 0.36 0.86 1.67 2.94 3.26 6.34 9.35 12.33 15.27 18.20 23.98 29.71 24.81 19.69 16.11 13.51 11.53 8.25 6.28 4.98 1.06
19 0.38 0.91 1.77 3.11 3.44 6.69 9.87 13.01 16.12 19.21 25.32 31.36 26.91 21.35 17.48 14.65 12.50 8.95 6.81 5.40
20 0.40 0.96 1.86 3.27 3.62 7.04 10.39 13.70 16.97 20.22 26.65 33.01 29.06 23.06 18.87 15.82 13.51 9.66 7.35 5.83

Carbon
Steel
21 0.42 1.00 1.95 3.44 3.80 7.39 10.91 14.38 17.82 21.23 27.98 34.66 31.26 24.81 20.31 17.02 14.53 10.40 7.91 4.87
22 0.44 1.05 2.05 3.60 3.98 7.75 11.43 15.07 18.67 22.24 29.31 36.32 33.52 26.60 21.77 18.25 15.58 11.15 8.48
23 0.46 1.10 2.14 3.76 4.16 8.10 11.95 15.75 19.52 23.25 30.65 37.97 35.84 28.44 23.28 19.51 16.66 11.92 9.07
24 0.48 1.15 2.23 3.93 4.34 8.45 12.47 16.44 20.37 24.26 31.98 39.62 38.20 30.31 24.81 20.79 17.75 12.70 9.66
25 0.50 1.20 2.33 4.09 4.52 8.80 12.99 17.12 21.21 25.27 33.31 41.27 40.61 32.23 26.38 22.11 18.87 13.51 10.27

& Moisture
Corrosion

Resistant
26 0.52 1.24 2.42 4.25 4.71 9.15 13.51 17.81 22.06 26.28 34.64 42.92 43.07 34.18 27.98 23.44 20.02 14.32 4.17
28 0.56 1.34 2.61 4.58 5.07 9.86 14.55 19.18 23.76 28.30 37.31 46.22 48.14 38.20 31.26 26.20 22.37 16.01
30 0.60 1.43 2.79 4.91 5.43 10.56 15.59 20.55 25.46 30.33 39.97 49.52 53.38 42.36 34.67 29.06 24.81 17.75
32 0.64 1.53 2.98 5.23 5.79 11.27 16.63 21.92 27.15 32.35 42.64 52.82 58.81 46.67 38.20 32.01 27.33 11.45
35 0.69 1.67 3.26 5.73 6.33 12.32 18.19 23.97 29.70 35.38 46.63 57.77 67.27 53.38 43.69 36.62 31.26

Maintenance
Reduced
40 0.79 1.91 3.72 6.54 7.24 14.08 20.79 27.40 33.94 40.43 53.30 66.03 78.66 65.22 53.38 44.74 29.65
45 0.89 2.15 4.19 7.36 8.14 15.84 23.38 30.82 38.18 45.49 59.96 74.28 88.49 77.83 63.70 37.00
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x

Attachments
4 strands: 3.3x

#60H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 10 25 50 90 100 200 300 400 500 600 800 1,000 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500
11 0.16 0.40 0.76 1.34 1.48 2.89 4.27 5.62 6.96 8.29 10.93 11.62 8.84 7.02 5.74 4.81 4.11 2.94 2.24 1.77 1.45 1.22 1.04 0.90
12 0.18 0.43 0.84 1.46 1.62 3.15 4.65 6.13 7.59 9.05 11.92 13.24 10.07 7.99 6.54 5.48 4.68 3.35 2.55 2.02 1.66 1.39 1.19
13 0.19 0.46 0.90 1.59 1.75 3.42 5.04 6.64 8.23 9.80 12.92 14.93 11.36 9.01 7.37 6.18 5.28 3.77 2.87 2.28 1.86 1.57 1.33
14 0.21 0.50 0.97 1.71 1.89 3.68 5.42 7.15 8.86 10.55 13.91 16.68 12.69 10.07 8.24 6.91 5.90 4.22 3.21 2.55 2.09 1.74

Horsepower
15 0.22 0.54 1.04 1.83 2.02 3.94 5.81 7.66 9.49 11.30 14.91 18.46 14.07 11.17 9.14 7.66 6.54 4.68 3.56 2.83 2.31 1.94

Tables
16 0.24 0.57 1.11 1.95 2.16 4.20 6.20 8.17 10.13 12.06 15.90 19.69 15.50 12.30 10.07 8.44 7.20 5.15 3.92 3.11 2.55
17 0.25 0.60 1.18 2.07 2.30 4.47 6.58 8.68 10.76 12.81 16.89 20.92 16.98 13.47 11.03 9.25 7.89 5.64 4.30 3.41 2.79
18 0.27 0.64 1.25 2.19 2.43 4.73 6.97 9.19 11.39 13.57 17.88 22.15 18.50 14.68 12.01 10.07 8.60 6.15 4.68 3.71 0.79
19 0.28 0.68 1.32 2.32 2.57 4.99 7.36 9.70 12.02 14.32 18.88 23.39 20.07 15.92 13.03 10.92 9.32 6.67 5.08 4.03
20 0.30 0.72 1.39 2.44 2.70 5.25 7.75 10.22 12.65 15.08 19.87 24.62 21.67 17.20 14.07 11.80 10.07 7.20 5.48 4.35

Components
Chain
21 0.31 0.75 1.45 2.57 2.83 5.51 8.14 10.72 13.29 15.83 20.86 25.85 23.31 18.50 15.15 12.69 10.84 7.76 5.90 3.63
22 0.33 0.78 1.53 2.68 2.97 5.78 8.52 11.24 13.92 16.58 21.86 27.08 25.00 19.84 16.23 13.61 11.62 8.31 6.32
23 0.34 0.82 1.60 2.80 3.10 6.04 8.91 11.74 14.56 17.34 22.86 28.31 26.73 21.21 17.36 14.55 12.42 8.89 6.76
24 0.36 0.86 1.66 2.93 3.24 6.30 9.30 12.26 15.19 18.09 23.85 29.54 28.49 22.60 18.50 15.50 13.24 9.47 7.20
25 0.37 0.89 1.74 3.05 3.37 6.56 9.69 12.77 15.82 18.84 24.84 30.78 30.28 24.03 19.67 16.49 14.07 10.07 7.66
Troubleshooting

26 0.39 0.92 1.80 3.17 3.51 6.82 10.07 13.28 16.45 19.60 25.83 32.01 32.12 25.49 20.86 17.48 14.93 10.68 3.11
Tools,

28 0.42 1.00 1.95 3.42 3.78 7.35 10.85 14.30 17.72 21.10 27.82 34.47 35.90 28.49 23.31 19.54 16.68 11.94
30 0.45 1.07 2.08 3.66 4.05 7.87 11.63 15.32 18.99 22.62 29.81 36.93 39.81 31.59 25.85 21.67 18.50 13.24
32 0.48 1.14 2.22 3.90 4.32 8.40 12.40 16.35 20.25 24.12 31.80 39.39 43.85 34.80 28.49 23.87 20.38 8.54
35 0.51 1.25 2.43 4.27 4.72 9.19 13.56 17.87 22.15 26.38 34.77 43.08 50.16 39.81 32.58 27.31 23.31

40 0.59 1.42 2.77 4.88 5.40 10.50 15.50 20.43 25.31 30.15 39.75 49.24 58.66 48.63 39.81 33.36 22.11
Information
Ordering

45 0.66 1.60 3.12 5.49 6.07 11.81 17.43 22.98 28.47 33.92 44.71 55.39 65.99 58.04 47.50 27.59
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following:
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 67

 Diamond
Chain

Heavy Series Horsepower Tables

#80H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 10 25 50 70 100 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000
11 0.49 1.19 2.31 3.19 4.50 8.75 12.91 17.02 21.08 25.12 29.12 27.41 22.97 19.61 17.00 14.92 11.84 9.69 8.12 6.93 4.96 3.77 3.00 2.45
12 0.54 1.30 2.52 3.48 4.91 9.54 14.09 18.57 23.00 27.40 31.77 31.23 26.17 22.35 19.37 17.00 13.49 11.04 9.25 7.90 5.65 4.30 3.41 2.79
13 0.58 1.40 2.73 3.77 5.31 10.34 15.26 20.11 24.92 29.68 34.42 35.22 29.51 25.20 21.84 19.17 15.21 12.45 10.43 8.91 6.37 4.85 3.85 3.15
14 0.63 1.51 2.94 4.06 5.72 11.13 16.43 21.66 26.83 31.97 37.07 39.36 32.98 28.16 24.41 21.42 17.00 13.91 11.66 9.96 7.12 5.42 4.30 2.02
Selection
Guide

15 0.67 1.62 3.15 4.35 6.13 11.93 17.61 23.21 28.75 34.25 39.71 43.65 36.58 31.23 27.07 23.76 18.85 15.43 12.93 11.04 7.90 6.01 4.77

16 0.72 1.73 3.36 4.64 6.54 12.73 18.78 24.75 30.67 36.53 42.36 48.08 40.30 34.41 29.82 26.17 20.77 17.00 14.25 12.16 8.70 6.62
17 0.76 1.84 3.57 4.94 6.95 13.52 19.95 26.30 32.59 38.82 45.01 51.17 44.13 37.68 32.66 28.66 22.75 18.62 15.60 13.32 9.53 7.25
18 0.81 1.94 3.78 5.23 7.36 14.32 21.13 27.85 34.50 41.10 47.66 54.17 48.08 41.05 35.59 31.23 24.78 20.29 17.00 14.51 10.39 1.88
19 0.85 2.05 3.99 5.52 7.77 15.11 22.30 29.40 36.42 43.38 50.30 57.18 52.15 44.52 38.59 33.87 26.88 22.00 18.44 15.74 11.26
20 0.90 2.16 4.20 5.81 8.18 15.91 23.48 30.94 38.34 45.67 52.95 60.19 56.32 48.08 41.68 36.58 29.03 23.76 19.91 17.00 12.16
Carbon
Steel

21 0.94 2.27 4.41 6.10 8.59 16.70 24.65 32.49 40.25 47.95 55.60 63.20 60.59 51.73 44.84 39.36 31.23 25.56 21.42 18.29
22 0.99 2.38 4.62 6.39 8.99 17.50 25.82 34.04 42.17 50.24 58.25 66.21 64.97 55.47 48.08 42.20 33.49 27.41 22.97 19.61
23 1.03 2.48 4.83 6.68 9.40 18.29 27.00 35.58 44.09 52.52 60.89 69.22 69.45 59.30 51.40 45.11 35.80 29.30 24.55 20.97
24 1.08 2.59 5.04 6.97 9.81 19.09 28.17 37.13 46.00 54.80 63.54 72.23 74.03 63.21 54.79 48.08 38.16 31.23 26.17 22.35
25 1.12 2.70 5.25 7.26 10.22 19.88 29.35 38.68 47.92 57.09 66.19 75.24 78.70 67.20 58.25 51.12 40.57 33.20 27.83 23.76
& Moisture
Corrosion
Resistant

26 1.17 2.81 5.46 7.55 10.63 20.68 30.52 40.23 49.84 59.37 68.84 78.25 83.47 71.27 61.78 54.22 43.02 35.22 29.51 25.20
28 1.26 3.03 5.88 8.13 11.45 22.27 32.87 43.32 53.67 63.94 74.13 84.27 93.29 79.65 69.04 60.59 48.08 39.36 32.98 28.16
30 1.34 3.24 6.31 8.71 12.27 23.86 35.21 46.41 57.50 68.50 79.43 90.29 101.10 88.33 76.57 67.20 53.33 43.65 36.58 12.26
32 1.43 3.46 6.73 9.29 13.08 25.45 37.56 49.51 61.34 73.07 84.72 96.31 107.84 97.31 84.35 74.03 58.75 48.08 39.43
35 1.57 3.78 7.36 10.16 14.31 27.84 41.08 54.15 67.09 79.92 92.67 105.34 117.95 111.31 96.49 84.68 67.20 55.00 5.58
Maintenance
Reduced

40 1.79 4.32 8.41 11.61 16.35 31.81 46.95 61.89 76.67 91.34 105.90 120.39 134.80 136.00 117.88 103.46 82.10 14.36
45 2.02 4.86 9.46 13.06 18.40 35.79 52.82 69.62 86.25 102.75 119.14 135.44 151.65 162.28 140.66 123.45 43.25
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Attachments

4 strands: 3.3x

#80H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 10 25 50 70 100 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,500 3,000 3,500 4,000
11 0.37 0.89 1.72 2.38 3.36 6.52 9.63 12.69 15.72 18.73 21.71 20.44 17.13 14.62 12.68 11.13 8.83 7.23 6.06 5.17 3.70 2.81 2.24 1.83
12 0.40 0.97 1.88 2.60 3.66 7.11 10.51 13.85 17.15 20.43 23.69 23.29 19.51 16.67 14.44 12.68 10.06 8.23 6.90 5.89 4.21 3.21 2.54 2.08
13 0.43 1.04 2.04 2.81 3.96 7.71 11.38 15.00 18.58 22.13 25.67 26.26 22.01 18.79 16.29 14.30 11.34 9.28 7.78 6.64 4.75 3.62 2.87 2.35
14 0.47 1.13 2.19 3.03 4.27 8.30 12.25 16.15 20.01 23.84 27.64 29.35 24.59 21.00 18.20 15.97 12.68 10.37 8.69 7.43 5.31 4.04 3.21 1.51
Horsepower

15 0.50 1.21 2.35 3.24 4.57 8.90 13.13 17.31 21.44 25.54 29.61 32.55 27.28 23.29 20.19 17.72 14.06 11.51 9.64 8.23 5.89 4.48 3.56
Tables

16 0.54 1.29 2.51 3.46 4.88 9.49 14.00 18.46 22.87 27.24 31.59 35.85 30.05 25.66 22.24 19.51 15.49 12.68 10.63 9.07 6.49 4.94
17 0.57 1.37 2.66 3.68 5.18 10.08 14.88 19.61 24.30 28.95 33.56 38.16 32.91 28.10 24.35 21.37 16.96 13.88 11.63 9.93 7.11 5.41
18 0.60 1.45 2.82 3.90 5.49 10.68 15.76 20.77 25.73 30.65 35.54 40.39 35.85 30.61 26.54 23.29 18.48 15.13 12.68 10.82 7.75 1.40
19 0.63 1.53 2.98 4.12 5.79 11.27 16.63 21.92 27.16 32.35 37.51 42.64 38.89 33.20 28.78 25.26 20.04 16.41 13.75 11.74 8.40
20 0.67 1.61 3.13 4.33 6.10 11.86 17.51 23.07 28.59 34.06 39.48 44.88 42.00 35.85 31.08 27.28 21.65 17.72 14.85 12.68 9.07
Components
Chain

21 0.70 1.69 3.29 4.55 6.41 12.45 18.38 24.23 30.01 35.76 41.46 47.13 45.18 38.58 33.44 29.35 23.29 19.06 15.97 13.64
22 0.74 1.77 3.45 4.77 6.70 13.05 19.25 25.38 31.45 37.46 43.44 49.37 48.45 41.36 35.85 31.47 24.97 20.44 17.13 14.62
23 0.77 1.85 3.60 4.98 7.01 13.64 20.13 26.53 32.88 39.16 45.41 51.62 51.79 44.22 38.33 33.64 26.70 21.85 18.31 15.64
24 0.81 1.93 3.76 5.20 7.32 14.24 21.01 27.69 34.30 40.86 47.38 53.86 55.20 47.14 40.86 35.85 28.46 23.29 19.51 16.67
25 0.84 2.01 3.91 5.41 7.62 14.82 21.89 28.84 35.73 42.57 49.36 56.11 58.69 50.11 43.44 38.12 30.25 24.76 20.75 17.72
Troubleshooting

26 0.87 2.10 4.07 5.63 7.93 15.42 22.76 30.00 37.17 44.27 51.33 58.35 62.24 53.15 46.07 40.43 32.08 26.26 22.01 18.79
Tools,

28 0.94 2.26 4.38 6.06 8.54 16.61 24.51 32.30 40.02 47.68 55.28 62.84 69.57 59.40 51.48 45.18 35.85 29.35 24.59 21.00
30 1.00 2.42 4.71 6.50 9.15 17.79 26.26 34.61 42.88 51.08 59.23 67.33 75.39 65.87 57.10 50.11 39.77 32.55 27.28 9.14
32 1.07 2.58 5.02 6.93 9.75 18.98 28.01 36.92 45.74 54.49 63.18 71.82 80.42 72.56 62.90 55.20 43.81 35.85 29.40
35 1.17 2.82 5.49 7.58 10.67 20.76 30.63 40.38 50.03 59.60 69.10 78.55 87.96 83.00 71.95 63.15 50.11 41.01 4.16

40 1.33 3.22 6.27 8.66 12.19 23.72 35.01 46.15 57.17 68.11 78.97 89.77 100.52 101.42 87.90 77.15 61.22 10.71
Information
Ordering

45 1.51 3.62 7.05 9.74 13.72 26.69 39.39 51.92 64.32 76.62 88.84 101.00 113.09 121.01 104.89 92.06 32.25
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
Conditions
Terms and

68 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Heavy Series Horsepower Tables
100H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 10 25 50 58 100 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,700 3,000
11 0.93 2.23 4.34 5.01 8.45 16.43 24.25 31.96 39.60 47.18 40.03 32.77 27.46 23.45 20.32 17.84 14.15 11.58 9.71 8.29 7.19 6.31 5.28 4.51
12 1.01 2.44 4.74 5.46 9.21 17.93 26.46 34.87 43.20 51.46 45.61 37.33 31.29 26.71 23.16 20.32 16.13 13.20 11.06 9.45 8.19 7.19 6.02 5.14
13 1.09 2.64 5.13 5.92 9.98 19.42 28.66 37.78 46.80 55.75 51.43 42.10 35.28 30.12 26.11 22.92 18.18 14.88 12.47 10.65 9.23 8.10 6.79 5.80
14 1.18 2.84 5.53 6.37 10.75 20.91 30.86 40.68 50.40 60.04 57.48 47.05 39.43 33.66 29.18 25.61 20.32 16.63 13.94 11.90 10.32 9.05 7.59

Selection
Guide
15 1.26 3.04 5.92 6.83 11.52 22.41 33.07 43.59 54.00 64.33 63.75 52.18 43.73 37.33 32.36 28.40 22.54 18.45 15.46 13.20 11.44 10.04 8.42

16 1.35 3.25 6.32 7.28 12.29 23.90 35.27 46.49 57.60 68.62 70.23 57.48 48.17 41.13 35.65 31.29 24.83 20.32 17.03 14.54 12.60 11.06
17 1.43 3.45 6.71 7.74 13.05 25.39 37.48 49.40 61.20 72.91 76.91 62.95 52.76 45.05 39.04 34.27 27.19 22.26 18.65 15.93 13.80 12.12
18 1.52 3.65 7.11 8.19 13.82 26.89 39.68 52.31 64.80 77.20 83.80 68.59 57.48 49.08 42.54 37.33 29.63 24.25 20.32 17.35 15.04 2.94
19 1.60 3.86 7.50 8.65 14.59 28.38 41.89 55.21 68.40 81.48 90.88 74.38 62.34 53.22 46.13 40.49 32.13 26.30 22.04 18.82 16.31
20 1.68 4.06 7.89 9.10 15.36 29.88 44.09 58.12 72.00 85.77 98.15 80.33 67.32 57.48 49.82 43.73 34.70 28.40 23.80 20.32 7.77

Carbon
Steel
21 1.77 4.26 8.29 9.56 16.13 31.37 46.30 61.02 75.60 90.06 104.43 86.43 72.43 61.85 53.61 47.05 37.33 30.56 25.61 21.87
22 1.85 4.46 8.68 10.01 16.89 32.86 48.50 63.93 79.20 94.35 109.40 92.68 77.67 66.31 57.48 50.45 40.03 32.77 27.46 21.67
23 1.94 4.67 9.08 10.47 17.66 34.36 50.71 66.83 82.80 98.64 114.37 99.07 83.02 70.89 61.44 53.93 42.79 35.03 29.35 2.94
24 2.02 4.87 9.47 10.92 18.43 35.85 52.91 69.74 86.40 102.93 119.34 105.60 88.50 75.56 65.49 57.48 45.61 37.33 31.29
25 2.10 5.07 9.87 11.38 19.20 37.34 55.12 72.65 90.00 107.22 124.32 112.27 94.09 80.33 69.63 61.11 48.49 39.69 29.68

& Moisture
Corrosion

Resistant
26 2.19 5.28 10.26 11.83 19.97 38.84 57.32 75.55 93.60 111.51 129.29 119.07 99.79 85.20 73.85 64.81 51.43 42.10 11.58
28 2.36 5.68 11.05 12.75 21.50 41.83 61.73 81.36 100.80 120.08 139.24 133.07 111.52 95.22 82.53 72.43 57.48 47.05
30 2.53 6.09 11.84 13.66 23.04 44.81 66.14 87.18 108.00 128.66 149.18 147.58 123.68 105.60 91.53 80.33 63.75 19.16
32 2.69 6.49 12.63 14.57 24.57 47.80 70.55 92.99 115.20 137.24 159.13 162.58 136.25 116.33 100.84 88.50 70.23
35 2.95 7.10 13.82 15.93 26.88 52.28 77.16 101.71 126.00 150.10 174.04 185.97 155.85 133.07 115.34 101.23 33.74

Maintenance
Reduced
40 3.37 8.12 15.79 18.21 30.72 59.75 88.18 116.23 144.00 171.55 198.91 226.11 190.42 162.58 140.92 82.37
45 3.79 9.13 17.76 20.48 34.55 67.22 99.21 130.76 162.00 192.99 223.77 254.38 227.21 194.00 85.51
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x

Attachments
4 strands: 3.3x

#100H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 10 25 50 58 100 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,700 3,000
11 0.69 1.66 3.24 3.74 6.30 12.25 18.08 23.83 29.53 35.18 29.85 24.44 20.48 17.49 15.15 13.30 10.55 8.64 7.24 6.18 5.36 4.71 3.94 3.36
12 0.75 1.82 3.53 4.07 6.87 13.37 19.73 26.00 32.21 38.37 34.01 27.84 23.33 19.92 17.27 15.15 12.03 9.84 8.25 7.05 6.11 5.36 4.49 3.83
13 0.81 1.97 3.83 4.41 7.44 14.48 21.37 28.17 34.90 41.57 38.35 31.39 26.31 22.46 19.47 17.09 13.56 11.10 9.30 7.94 6.88 6.04 5.06 4.33
14 0.88 2.12 4.12 4.75 8.02 15.59 23.01 30.34 37.58 44.77 42.86 35.09 29.40 25.10 21.76 19.10 15.15 12.40 10.40 8.87 7.70 6.75 5.66

Horsepower
15 0.94 2.27 4.41 5.09 8.59 16.71 24.66 32.51 40.27 47.97 47.54 38.91 32.61 27.84 24.13 21.18 16.81 13.76 11.53 9.84 8.53 7.49 6.28

Tables
16 1.01 2.42 4.71 5.43 9.16 17.82 26.30 34.67 42.95 51.17 52.37 42.86 35.92 30.67 26.58 23.33 18.52 15.15 12.70 10.84 9.40 8.25
17 1.07 2.57 5.00 5.77 9.73 18.93 27.95 36.84 45.64 54.37 57.35 46.94 39.34 33.59 29.11 25.56 20.28 16.60 13.91 11.88 10.29 9.04
18 1.13 2.72 5.30 6.11 10.31 20.05 29.59 39.01 48.32 57.57 62.49 51.15 42.86 36.60 31.72 27.84 22.10 18.08 15.15 12.94 11.22 2.19
19 1.19 2.88 5.59 6.45 10.88 21.16 31.24 41.17 51.01 60.76 67.77 55.47 46.49 39.69 34.40 30.19 23.96 19.61 16.44 14.03 12.16
20 1.25 3.03 5.88 6.79 11.45 22.28 32.88 43.34 53.69 63.96 73.19 59.90 50.20 42.86 37.15 32.61 25.88 21.18 17.75 15.15 5.79

Components
Chain
21 1.32 3.18 6.18 7.13 12.03 23.39 34.53 45.50 56.37 67.16 77.87 64.45 54.01 46.12 39.98 35.09 27.84 22.79 19.10 16.31
22 1.38 3.33 6.47 7.46 12.59 24.50 36.17 47.67 59.06 70.36 81.58 69.11 57.92 49.45 42.86 37.62 29.85 24.44 20.48 16.16
23 1.45 3.48 6.77 7.81 13.17 25.62 37.81 49.84 61.74 73.56 85.29 73.88 61.91 52.86 45.82 40.22 31.91 26.12 21.89 2.19
24 1.51 3.63 7.06 8.14 13.74 26.73 39.45 52.01 64.43 76.75 88.99 78.75 65.99 56.35 48.84 42.86 34.01 27.84 23.33
25 1.57 3.78 7.36 8.49 14.32 27.84 41.10 54.18 67.11 79.95 92.71 83.72 70.16 59.90 51.92 45.57 36.16 29.60 22.13
Troubleshooting

26 1.63 3.94 7.65 8.82 14.89 28.96 42.74 56.34 69.80 83.15 96.41 88.79 74.41 63.53 55.07 48.33 38.35 31.39 8.64
Tools,

28 1.76 4.24 8.24 9.51 16.03 31.19 46.03 60.67 75.17 89.54 103.83 99.23 83.16 71.01 61.54 54.01 42.86 35.09
30 1.89 4.54 8.83 10.19 17.18 33.41 49.32 65.01 80.54 95.94 111.24 110.05 92.23 78.75 68.25 59.90 47.54 14.29
32 2.01 4.84 9.42 10.86 18.32 35.64 52.61 69.34 85.90 102.34 118.66 121.24 101.60 86.75 75.20 65.99 52.37
35 2.20 5.29 10.31 11.88 20.04 38.99 57.54 75.85 93.96 111.93 129.78 138.68 116.22 99.23 86.01 75.49 25.16

40 2.51 6.06 11.77 13.58 22.91 44.56 65.76 86.67 107.38 127.92 148.33 168.61 142.00 121.24 105.08 61.42
Information
Ordering

45 2.83 6.81 13.24 15.27 25.76 50.13 73.98 97.51 120.80 143.91 166.87 189.69 169.43 144.67 63.76
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 69

 Diamond
Chain

Heavy Series Horsepower Tables

#120H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 5 10 25 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,700
11 0.79 1.54 3.72 7.23 10.67 14.06 20.76 27.36 40.38 53.22 65.93 58.37 46.32 37.91 31.77 27.13 20.64 16.38 13.40 11.23 9.59 8.31 7.30 6.11
12 0.86 1.68 4.05 7.89 11.64 15.34 22.64 29.85 44.05 58.06 71.93 66.51 52.78 43.20 36.20 30.91 23.51 18.66 15.27 12.80 10.93 9.47 8.31 1.06
13 0.94 1.82 4.39 8.54 12.61 16.62 24.53 32.33 47.72 62.90 77.92 74.99 59.51 48.71 40.82 34.85 26.51 21.04 17.22 14.43 12.32 10.68 9.37
14 1.01 1.96 4.73 9.20 13.58 17.90 26.42 34.82 51.39 67.73 83.92 83.81 66.51 54.44 45.62 38.95 29.63 23.51 19.25 16.13 13.77 11.94 4.55
Selection
Guide

15 1.08 2.10 5.07 9.86 14.55 19.18 28.30 37.31 55.06 72.57 89.91 92.95 73.76 60.37 50.59 43.20 32.86 26.08 21.34 17.89 15.27 13.24

16 1.15 2.24 5.41 10.52 15.52 20.46 30.19 39.79 58.73 77.41 95.90 102.39 81.26 66.51 55.74 47.59 36.20 28.73 23.51 19.71 16.83
17 1.23 2.38 5.74 11.17 16.49 21.73 32.08 42.28 62.40 82.25 101.90 112.14 88.99 72.84 61.04 52.12 39.65 31.46 25.75 21.58 18.43
18 1.30 2.52 6.08 11.83 17.46 23.01 33.96 44.77 66.07 87.09 107.89 122.18 96.96 79.36 66.51 56.78 43.20 34.28 28.06 23.51 4.23
19 1.37 2.66 6.42 12.49 18.43 24.29 35.85 47.26 69.74 91.93 113.89 132.50 105.15 86.06 72.13 61.58 46.85 37.18 30.43 25.50
20 1.44 2.80 6.76 13.14 19.40 25.57 37.74 49.74 73.41 96.76 119.88 142.81 113.56 92.95 77.89 66.51 50.59 40.15 32.86 24.58
Carbon
Steel

21 1.51 2.94 7.09 13.80 20.37 26.85 39.63 52.23 77.08 101.60 125.87 149.95 122.18 100.00 83.81 71.56 54.44 43.20 35.36
22 1.59 3.08 7.43 14.46 21.34 28.13 41.51 54.72 80.75 106.44 131.87 157.09 131.01 107.23 89.87 76.73 58.37 46.32 37.91
23 1.66 3.22 7.77 15.12 22.31 29.41 43.40 57.20 84.42 111.28 137.86 164.23 140.04 114.62 96.06 82.02 62.39 49.51 38.38
24 1.73 3.36 8.11 15.77 23.28 30.68 45.29 59.69 88.10 116.12 143.86 171.37 149.28 122.18 102.39 87.43 66.51 52.78 12.24
25 1.80 3.50 8.45 16.43 24.25 31.96 47.17 62.18 91.77 120.96 149.85 178.51 158.70 129.90 108.86 92.95 70.71 56.11
& Moisture
Corrosion
Resistant

26 1.87 3.64 8.78 17.09 25.22 33.24 49.06 64.66 95.44 125.79 155.84 185.65 168.32 137.77 115.46 98.58 74.99 59.51
28 2.02 3.93 9.46 18.40 27.16 35.80 52.83 69.64 102.78 135.47 167.83 199.94 188.11 153.97 129.03 110.17 83.81 30.35
30 2.16 4.21 10.14 19.72 29.10 38.36 56.61 74.61 110.12 145.15 179.82 214.22 208.62 170.75 143.10 122.18 92.95
32 2.31 4.49 10.81 21.03 31.04 40.91 60.38 79.59 117.46 154.82 191.81 228.50 229.83 188.11 157.65 134.60 88.71
35 2.52 4.91 11.82 23.00 33.95 44.75 66.04 87.05 128.47 169.34 209.79 249.92 262.89 215.17 180.33 153.97 12.54
Maintenance
Reduced

40 2.88 5.61 13.51 26.29 38.80 51.14 75.48 99.48 146.83 193.53 239.76 285.62 321.19 262.89 220.32 118.61
45 3.24 6.31 15.20 29.58 43.65 57.53 84.91 111.92 165.18 217.72 269.73 321.32 372.57 278.98 148.03
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Attachments

4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support

#120H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 5 10 25 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400 2,700
11 0.59 1.15 2.77 5.39 7.96 10.48 15.48 20.40 30.11 39.69 49.16 43.53 34.54 28.27 23.69 20.23 15.39 12.21 9.99 8.37 7.15 6.20 5.44 4.56
12 0.64 1.25 3.02 5.88 8.68 11.44 16.88 22.26 32.85 43.30 53.64 49.60 39.36 32.21 26.99 23.05 17.53 13.91 11.39 9.54 8.15 7.06 6.20 0.79
13 0.70 1.36 3.27 6.37 9.40 12.39 18.29 24.11 35.58 46.90 58.10 55.92 44.38 36.32 30.44 25.99 19.77 15.69 12.84 10.76 9.19 7.96 6.99
14 0.75 1.46 3.53 6.86 10.13 13.35 19.70 25.97 38.32 50.51 62.58 62.50 49.60 40.60 34.02 29.05 22.10 17.53 14.35 12.03 10.27 8.90 3.39
Horsepower

15 0.81 1.57 3.78 7.35 10.85 14.30 21.10 27.82 41.06 54.12 67.05 69.31 55.00 45.02 37.72 32.21 24.50 19.45 15.91 13.34 11.39 9.87
Tables

16 0.86 1.67 4.03 7.84 11.57 15.26 22.51 29.67 43.79 57.72 71.51 76.35 60.60 49.60 41.57 35.49 26.99 21.42 17.53 14.70 12.55
17 0.92 1.77 4.28 8.33 12.30 16.20 23.92 31.53 46.53 61.33 75.99 83.62 66.36 54.32 45.52 38.87 29.57 23.46 19.20 16.09 13.74
18 0.97 1.88 4.53 8.82 13.02 17.16 25.32 33.38 49.27 64.94 80.45 91.11 72.30 59.18 49.60 42.34 32.21 25.56 20.92 17.53 3.15
19 1.02 1.98 4.79 9.31 13.74 18.11 26.73 35.24 52.01 68.55 84.93 98.81 78.41 64.17 53.79 45.92 34.94 27.73 22.69 19.02
20 1.07 2.09 5.04 9.80 14.47 19.07 28.14 37.09 54.74 72.15 89.39 106.49 84.68 69.31 58.08 49.60 37.72 29.94 24.50 18.33
Components
Chain

21 1.13 2.19 5.29 10.29 15.19 20.02 29.55 38.95 57.48 75.76 93.86 111.82 91.11 74.57 62.50 53.36 40.60 32.21 26.37
22 1.19 2.30 5.54 10.78 15.91 20.98 30.95 40.80 60.22 79.37 98.34 117.14 97.69 79.96 67.02 57.22 43.53 34.54 28.27
23 1.24 2.40 5.79 11.27 16.64 21.93 32.36 42.65 62.95 82.98 102.80 122.47 104.43 85.47 71.63 61.16 46.52 36.92 28.62
24 1.29 2.51 6.05 11.76 17.36 22.88 33.77 44.51 65.70 86.59 107.28 127.79 111.32 91.11 76.35 65.20 49.60 39.36 9.13
25 1.34 2.61 6.30 12.25 18.08 23.83 35.17 46.37 68.43 90.20 111.74 133.11 118.34 96.87 81.18 69.31 52.73 41.84
Troubleshooting

26 1.39 2.71 6.55 12.74 18.81 24.79 36.58 48.22 71.17 93.80 116.21 138.44 125.52 102.74 86.10 73.51 55.92 44.38
Tools,

28 1.51 2.93 7.05 13.72 20.25 26.70 39.40 51.93 76.64 101.02 125.15 149.10 140.27 114.82 96.22 82.15 62.50 22.63
30 1.61 3.14 7.56 14.71 21.70 28.61 42.21 55.64 82.12 108.24 134.09 159.74 155.57 127.33 106.71 91.11 69.31
32 1.72 3.35 8.06 15.68 23.15 30.51 45.03 59.35 87.59 115.45 143.03 170.39 171.38 140.27 117.56 100.37 66.15
35 1.88 3.66 8.81 17.15 25.32 33.37 49.25 64.91 95.80 126.28 156.44 186.37 196.04 160.45 134.47 114.82 9.35

40 2.15 4.18 10.07 19.60 28.93 38.14 56.29 74.18 109.49 144.32 178.79 212.99 239.51 196.04 164.29 88.45
Information
Ordering

45 2.42 4.71 11.33 22.06 32.55 42.90 63.32 83.46 123.17 162.35 201.14 239.61 277.83 208.04 110.39
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
5 strands or more: please contact Diamond Chain technical support
Conditions
Terms and

70 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Heavy Series Horsepower Tables
#140H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 5 10 25 44 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400
11 1.21 2.36 5.69 9.79 11.07 16.34 21.54 31.79 41.90 61.84 81.50 86.80 66.03 52.40 42.89 35.94 30.69 23.35 18.53 15.16 12.71 10.85 9.40 8.25
12 1.32 2.58 6.21 10.68 12.08 17.83 23.50 34.68 45.71 67.46 88.91 98.90 75.24 59.70 48.87 40.95 34.97 26.60 21.11 17.28 14.48 12.36 10.72
13 1.43 2.79 6.73 11.57 13.08 19.31 25.45 37.57 49.52 73.08 96.32 111.52 84.83 67.32 55.10 46.18 39.43 29.99 23.80 19.48 16.33 13.94
14 1.55 3.01 7.24 12.46 14.09 20.80 27.41 40.46 53.32 78.70 103.73 124.63 94.81 75.24 61.58 51.61 44.06 33.52 26.60 21.77 18.25 15.58

Selection
Guide
15 1.66 3.22 7.76 13.35 15.10 22.28 29.37 43.35 57.13 84.32 111.14 137.69 105.15 83.44 68.29 57.23 48.87 37.17 29.50 24.15 20.24

16 1.77 3.44 8.28 14.24 16.10 23.77 31.33 46.24 60.94 89.94 118.55 146.87 115.83 91.92 75.24 63.05 53.83 40.95 32.50 26.60 22.29
17 1.88 3.65 8.80 15.13 17.11 25.25 33.29 49.13 64.75 95.56 125.96 156.05 126.86 100.67 82.40 69.05 58.96 44.85 35.59 29.13
18 1.99 3.86 9.31 16.02 18.12 26.74 35.24 52.02 68.56 101.19 133.37 165.23 138.22 109.68 89.77 75.24 64.24 48.87 38.78 31.74
19 2.10 4.08 9.83 16.92 19.12 28.22 37.20 54.90 72.37 106.81 140.78 174.41 149.89 118.95 97.36 81.59 69.66 53.00 42.06 33.55
20 2.21 4.29 10.35 17.81 20.13 29.71 39.16 57.79 76.18 112.43 148.19 183.59 161.88 128.46 105.15 88.12 75.24 57.23 45.42

Carbon
Steel
21 2.32 4.51 10.87 18.70 21.14 31.20 41.12 60.68 79.99 118.05 155.60 192.77 174.17 138.22 113.13 94.81 80.95 61.58 48.87
22 2.43 4.72 11.38 19.59 22.14 32.68 43.08 63.57 83.80 123.67 163.01 201.95 186.76 148.21 121.30 101.66 86.80 66.03 52.40
23 2.54 4.94 11.90 20.48 23.15 34.17 45.03 66.46 87.60 129.29 170.42 211.13 199.64 158.43 129.67 108.67 92.78 70.58 29.48
24 2.65 5.15 12.42 21.37 24.16 35.65 46.99 69.35 91.41 134.91 177.83 220.31 212.80 168.87 138.22 115.83 98.90 75.24
25 2.76 5.37 12.94 22.26 25.16 37.14 48.95 72.24 95.22 140.54 185.24 229.49 226.24 179.53 146.94 123.15 105.15 79.99

& Moisture
Corrosion

Resistant
26 2.87 5.58 13.45 23.15 26.17 38.62 50.91 75.13 99.03 146.16 192.65 238.67 239.95 190.41 155.85 130.61 111.52 84.83
28 3.09 6.01 14.49 24.93 28.18 41.59 54.82 80.91 106.65 157.40 207.47 257.03 268.16 212.80 174.17 145.97 124.63 41.32
30 3.31 6.44 15.52 26.71 30.20 44.56 58.74 86.69 114.27 168.64 222.28 275.39 297.40 236.00 193.16 161.88 138.22
32 3.53 6.87 16.56 28.49 32.21 47.54 62.66 92.47 121.88 179.89 237.10 293.74 327.63 259.99 212.80 178.34 152.27
35 3.86 7.51 18.11 31.16 35.23 51.99 68.53 101.14 133.31 196.75 259.33 321.28 374.76 297.40 243.41 203.99 66.13

Maintenance
Reduced
40 4.41 8.59 20.70 35.61 40.26 59.42 78.32 115.59 152.36 224.86 296.38 367.18 437.42 363.35 264.26 74.76
45 4.97 9.66 23.28 40.06 45.29 66.85 88.11 130.04 171.40 252.96 333.43 413.08 492.09 352.89 132.45
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x

Attachments
4 strands: 3.3x

#140H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 5 10 25 44 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,200 1,400 1,600 1,800 2,000 2,200 2,400
11 0.90 1.76 4.24 7.30 8.25 12.18 16.06 23.71 31.24 46.11 60.77 64.73 49.24 39.07 31.98 26.80 22.89 17.41 13.82 11.30 9.48 8.09 7.01 6.15
12 0.98 1.92 4.63 7.96 9.01 13.30 17.52 25.86 34.09 50.30 66.30 73.75 56.11 44.52 36.44 30.54 26.08 19.84 15.74 12.89 10.80 9.22 7.99
13 1.07 2.08 5.02 8.63 9.75 14.40 18.98 28.02 36.93 54.50 71.83 83.16 63.26 50.20 41.09 34.44 29.40 22.36 17.75 14.53 12.18 10.40
14 1.16 2.24 5.40 9.29 10.51 15.51 20.44 30.17 39.76 58.69 77.35 92.94 70.70 56.11 45.92 38.49 32.86 25.00 19.84 16.23 13.61 11.62

Horsepower
15 1.24 2.40 5.79 9.96 11.26 16.61 21.90 32.33 42.60 62.88 82.88 102.68 78.41 62.22 50.92 42.68 36.44 27.72 22.00 18.01 15.09

Tables
16 1.32 2.57 6.17 10.62 12.01 17.73 23.36 34.48 45.44 67.07 88.40 109.52 86.37 68.54 56.11 47.02 40.14 30.54 24.24 19.84 16.62
17 1.40 2.72 6.56 11.28 12.76 18.83 24.82 36.64 48.28 71.26 93.93 116.37 94.60 75.07 61.45 51.49 43.97 33.44 26.54 21.72
18 1.48 2.88 6.94 11.95 13.51 19.94 26.28 38.79 51.13 75.46 99.45 123.21 103.07 81.79 66.94 56.11 47.90 36.44 28.92 23.67
19 1.57 3.04 7.33 12.62 14.26 21.04 27.74 40.94 53.97 79.65 104.98 130.06 111.77 88.70 72.60 60.84 51.95 39.52 31.36 25.02
20 1.65 3.20 7.72 13.28 15.01 22.15 29.20 43.09 56.81 83.84 110.51 136.90 120.71 95.79 78.41 65.71 56.11 42.68 33.87

Components
Chain
21 1.73 3.36 8.11 13.94 15.76 23.27 30.66 45.25 59.65 88.03 116.03 143.75 129.88 103.07 84.36 70.70 60.36 45.92 36.44
22 1.81 3.52 8.49 14.61 16.51 24.37 32.12 47.40 62.49 92.22 121.56 150.59 139.27 110.52 90.45 75.81 64.73 49.24 39.07
23 1.89 3.68 8.87 15.27 17.26 25.48 33.58 49.56 65.32 96.41 127.08 157.44 148.87 118.14 96.69 81.04 69.19 52.63 21.98
24 1.98 3.84 9.26 15.94 18.02 26.58 35.04 51.71 68.16 100.60 132.61 164.29 158.68 125.93 103.07 86.37 73.75 56.11
25 2.06 4.00 9.65 16.60 18.76 27.70 36.50 53.87 71.01 104.80 138.13 171.13 168.71 133.88 109.57 91.83 78.41 59.65
Troubleshooting

26 2.14 4.16 10.03 17.26 19.51 28.80 37.96 56.02 73.85 108.99 143.66 177.98 178.93 141.99 116.22 97.40 83.16 63.26
Tools,

28 2.30 4.48 10.81 18.59 21.01 31.01 40.88 60.33 79.53 117.37 154.71 191.67 199.97 158.68 129.88 108.85 92.94 30.81
30 2.47 4.80 11.57 19.92 22.52 33.23 43.80 64.64 85.21 125.75 165.75 205.36 221.77 175.99 144.04 120.71 103.07
32 2.63 5.12 12.35 21.24 24.02 35.45 46.73 68.95 90.89 134.14 176.81 219.04 244.31 193.87 158.68 132.99 113.55
35 2.88 5.60 13.50 23.24 26.27 38.77 51.10 75.42 99.41 146.72 193.38 239.58 279.46 221.77 181.51 152.12 49.31

40 3.29 6.41 15.44 26.55 30.02 44.31 58.40 86.20 113.61 167.68 221.01 273.81 326.18 270.95 197.06 55.75
Information
Ordering

45 3.71 7.20 17.36 29.87 33.77 49.85 65.70 96.97 127.81 188.63 248.64 308.03 366.95 263.15 98.77
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 71

 Diamond
Chain

Heavy Series Horsepower Tables

#160H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 2 5 10 25 40 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000
11 0.73 1.75 3.40 8.19 12.86 15.94 23.52 31.00 45.75 60.31 89.00 117.32 96.58 73.47 58.31 47.72 39.99 34.15 29.60 25.98 20.61 16.87 14.14 12.07
12 0.79 1.91 3.71 8.94 14.03 17.39 25.66 33.82 49.91 65.79 97.10 127.98 110.05 83.72 66.44 54.38 45.57 38.91 33.73 29.60 23.49 19.22 16.11 12.02
13 0.86 2.07 4.02 9.68 15.20 18.83 27.80 36.64 54.07 71.27 105.19 138.65 124.09 94.40 74.91 61.31 51.38 43.87 38.03 33.37 26.48 21.68 18.17
14 0.92 2.22 4.33 10.43 16.37 20.28 29.93 39.46 58.23 76.75 113.28 149.31 138.68 105.50 83.72 68.52 57.43 49.03 42.50 37.30 29.60 24.23 8.08
Selection
Guide

15 0.99 2.38 4.64 11.17 17.54 21.73 32.07 42.27 62.39 82.24 121.37 159.98 153.80 117.00 92.85 75.99 63.69 54.38 47.13 41.37 32.83 26.87

16 1.05 2.54 4.94 11.92 18.71 23.18 34.21 45.09 66.55 87.72 129.46 170.64 169.43 128.89 102.28 83.72 70.16 59.90 51.92 45.57 36.16 29.60
17 1.12 2.70 5.25 12.66 19.88 24.63 36.35 47.91 70.71 93.20 137.55 181.31 185.56 141.16 112.02 91.69 76.84 65.61 56.87 49.91 39.61
18 1.19 2.86 5.56 13.41 21.05 26.08 38.49 50.73 74.87 98.68 145.64 191.97 202.17 153.80 122.05 99.90 83.72 71.48 61.96 54.38 43.15
19 1.25 3.02 5.87 14.15 22.22 27.53 40.63 53.55 79.03 104.17 153.74 202.64 219.25 166.79 132.36 108.33 90.79 77.52 67.19 58.97 43.82
20 1.32 3.18 6.18 14.89 23.39 28.98 42.76 56.37 83.19 109.65 161.83 213.30 236.79 180.13 142.95 117.00 98.05 83.72 72.57 63.69
Carbon
Steel

21 1.38 3.34 6.49 15.64 24.56 30.42 44.90 59.18 87.35 115.13 169.92 223.97 254.77 193.81 153.80 125.88 105.50 90.07 78.08 68.52
22 1.45 3.49 6.80 16.38 25.73 31.87 47.04 62.00 91.51 120.61 178.01 234.63 273.18 207.82 164.91 134.98 113.12 96.58 83.72 73.47
23 1.52 3.65 7.11 17.13 26.90 33.32 49.18 64.82 95.67 126.10 186.10 245.30 292.02 222.15 176.29 144.29 120.92 103.24 89.49 68.24
24 1.58 3.81 7.42 17.87 28.07 34.77 51.32 67.64 99.83 131.58 194.19 255.96 311.27 236.79 187.91 153.80 128.89 110.05 95.39 21.76
25 1.65 3.97 7.73 18.62 29.23 36.22 53.45 70.46 103.99 137.06 202.28 266.63 330.32 251.74 199.77 163.51 137.03 117.00 101.41
& Moisture
Corrosion
Resistant

26 1.71 4.13 8.03 19.36 30.40 37.67 55.59 73.28 108.14 142.54 210.37 277.29 343.53 267.00 211.88 173.42 145.33 124.09 67.09
28 1.85 4.45 8.65 20.85 32.74 40.57 59.87 78.91 116.46 153.51 226.56 298.62 369.96 298.39 236.79 193.81 162.42 135.17
30 1.98 4.77 9.27 22.34 35.08 43.46 64.15 84.55 124.78 164.47 242.74 319.95 396.38 330.92 262.61 214.94 180.13 49.06
32 2.11 5.08 9.89 23.83 37.42 46.36 68.42 90.18 133.10 175.44 258.92 341.28 422.81 364.56 289.30 236.79 157.70
35 2.31 5.56 10.82 26.07 40.93 50.71 74.84 98.64 145.58 191.88 283.20 373.28 462.45 417.01 330.92 270.86 22.30
Maintenance
Reduced

40 2.64 6.35 12.36 29.79 46.78 57.95 85.53 112.73 166.38 219.30 323.65 426.60 528.51 509.49 345.15 57.42
45 2.97 7.15 13.91 33.51 52.62 65.19 96.22 126.82 187.17 246.71 364.11 479.93 594.58 495.96 173.00
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Attachments

4 strands: 3.3x

#160H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 2 5 10 25 40 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800 2,000
11 0.54 1.30 2.54 6.11 9.59 11.89 17.54 23.12 34.12 44.97 66.37 87.49 72.02 54.79 43.48 35.58 29.82 25.47 22.07 19.37 15.37 12.58 10.54 9.00
12 0.59 1.42 2.77 6.67 10.46 12.97 19.13 25.22 37.22 49.06 72.41 95.43 82.06 62.43 49.54 40.55 33.98 29.02 25.15 22.07 17.52 14.33 12.01 8.96
13 0.64 1.54 3.00 7.22 11.33 14.04 20.73 27.32 40.32 53.15 78.44 103.39 92.53 70.39 55.86 45.72 38.31 32.71 28.36 24.88 19.75 16.17 13.55
14 0.69 1.66 3.23 7.78 12.21 15.12 22.32 29.43 43.42 57.23 84.47 111.34 103.41 78.67 62.43 51.10 42.83 36.56 31.69 27.81 22.07 18.07 6.03
Horsepower

15 0.74 1.77 3.46 8.33 13.08 16.20 23.91 31.52 46.52 61.33 90.51 119.30 114.69 87.25 69.24 56.67 47.49 40.55 35.14 30.85 24.48 20.04
Tables

16 0.78 1.89 3.68 8.89 13.95 17.29 25.51 33.62 49.63 65.41 96.54 127.25 126.34 96.11 76.27 62.43 52.32 44.67 38.72 33.98 26.96 22.07
17 0.84 2.01 3.91 9.44 14.82 18.37 27.11 35.73 52.73 69.50 102.57 135.20 138.37 105.26 83.53 68.37 57.30 48.93 42.41 37.22 29.54
18 0.89 2.13 4.15 10.00 15.70 19.45 28.70 37.83 55.83 73.59 108.60 143.15 150.76 114.69 91.01 74.50 62.43 53.30 46.20 40.55 32.18
19 0.93 2.25 4.38 10.55 16.57 20.53 30.30 39.93 58.93 77.68 114.64 151.11 163.49 124.38 98.70 80.78 67.70 57.81 50.10 43.97 32.68
20 0.98 2.37 4.61 11.10 17.44 21.61 31.89 42.04 62.03 81.77 120.68 159.06 176.57 134.32 106.60 87.25 73.12 62.43 54.12 47.49
Components
Chain

21 1.03 2.49 4.84 11.66 18.31 22.68 33.48 44.13 65.14 85.85 126.71 167.01 189.98 144.52 114.69 93.87 78.67 67.17 58.22 51.10
22 1.08 2.60 5.07 12.21 19.19 23.77 35.08 46.23 68.24 89.94 132.74 174.96 203.71 154.97 122.97 100.65 84.35 72.02 62.43 54.79
23 1.13 2.72 5.30 12.77 20.06 24.85 36.67 48.34 71.34 94.03 138.77 182.92 217.76 165.66 131.46 107.60 90.17 76.99 66.73 50.89
24 1.18 2.84 5.53 13.33 20.93 25.93 38.27 50.44 74.44 98.12 144.81 190.87 232.11 176.57 140.12 114.69 96.11 82.06 71.13 16.23
25 1.23 2.96 5.76 13.88 21.80 27.01 39.86 52.54 77.55 102.21 150.84 198.83 246.32 187.72 148.97 121.93 102.18 87.25 75.62
Troubleshooting

26 1.28 3.08 5.99 14.44 22.67 28.09 41.45 54.64 80.64 106.29 156.87 206.78 256.17 199.10 158.00 129.32 108.37 92.53 50.03
Tools,

28 1.38 3.32 6.45 15.55 24.41 30.25 44.65 58.84 86.84 114.47 168.95 222.68 275.88 222.51 176.57 144.52 121.12 100.80
30 1.48 3.56 6.91 16.66 26.16 32.41 47.84 63.05 93.05 122.65 181.01 238.59 295.58 246.77 195.83 160.28 134.32 36.58
32 1.57 3.79 7.37 17.77 27.90 34.57 51.02 67.25 99.25 130.83 193.08 254.49 315.29 271.85 215.73 176.57 117.60
35 1.72 4.15 8.07 19.44 30.52 37.81 55.81 73.56 108.56 143.08 211.18 278.35 344.85 310.96 246.77 201.98 16.63

40 1.97 4.74 9.22 22.21 34.88 43.21 63.78 84.06 124.07 163.53 241.35 318.12 394.11 379.93 257.38 42.82
Information
Ordering

45 2.21 5.33 10.37 24.99 39.24 48.61 71.75 94.57 139.57 183.97 271.52 357.88 443.38 369.84 129.01
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
4 strands: 3.3x
Conditions
Terms and

72 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Heavy Series Horsepower Tables
180H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 2 5 10 25 37 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800
11 0.99 2.40 4.66 11.24 16.38 21.87 32.27 42.54 62.78 82.75 122.13 148.32 106.13 80.73 64.07 52.44 43.95 37.52 32.52 28.54 22.65 18.54 15.54
12 1.09 2.62 5.09 12.26 17.87 23.86 35.21 46.41 68.49 90.28 133.24 169.00 120.92 91.99 73.00 59.75 50.07 42.75 37.06 32.52 25.81 21.12 2.40
13 1.18 2.83 5.51 13.29 19.36 25.84 38.14 50.28 74.20 97.80 144.34 190.25 136.35 103.72 82.31 67.37 56.46 48.21 41.79 36.67 29.10 23.82
14 1.27 3.05 5.94 14.31 20.85 27.83 41.08 54.14 79.91 105.32 155.44 204.89 152.38 115.92 91.99 75.29 63.10 53.87 46.70 40.98 32.52 10.23

Selection
Guide
15 1.36 3.27 6.36 15.33 22.33 29.82 44.01 58.01 85.61 112.85 166.55 219.52 169.00 128.56 102.02 83.50 69.98 59.75 51.79 45.45 36.07

16 1.45 3.49 6.78 16.35 23.82 31.81 46.94 61.88 91.32 120.37 177.65 234.16 186.17 141.63 112.39 91.99 77.09 65.82 57.05 50.07 39.74
17 1.54 3.71 7.21 17.37 25.31 33.80 49.88 65.74 97.03 127.89 188.75 248.79 203.90 155.11 123.09 100.75 84.43 72.09 62.49 54.84
18 1.63 3.92 7.63 18.40 26.80 35.78 52.81 69.61 102.74 135.42 199.86 263.43 222.15 169.00 134.11 109.77 91.99 78.54 68.08 59.75
19 1.72 4.14 8.06 19.42 28.29 37.77 55.75 73.48 108.45 142.94 210.96 278.06 240.92 183.27 145.44 119.04 99.76 85.18 73.83 64.80
20 1.81 4.36 8.48 20.44 29.78 39.76 58.68 77.35 114.15 150.46 222.06 292.70 260.19 197.93 157.07 128.56 107.74 91.99 79.74 55.31

Carbon
Steel
21 1.90 4.58 8.90 21.46 31.27 41.75 61.62 81.21 119.86 157.99 233.17 307.33 279.94 212.96 169.00 138.32 115.92 98.97 85.79
22 1.99 4.80 9.33 22.48 32.76 43.74 64.55 85.08 125.57 165.51 244.27 321.97 300.17 228.35 181.21 148.32 124.30 106.13 87.35
23 2.08 5.01 9.75 23.50 34.25 45.72 67.48 88.95 131.28 173.03 255.37 336.60 320.87 244.10 193.70 158.54 132.87 113.45 29.32
24 2.17 5.23 10.18 24.53 35.74 47.71 70.42 92.82 136.98 180.56 266.48 351.24 342.02 260.19 206.47 169.00 141.63 120.92
25 2.26 5.45 10.60 25.55 37.22 49.70 73.35 96.68 142.69 188.08 277.58 365.87 363.62 276.62 219.51 179.67 150.57 96.16

& Moisture
Corrosion

Resistant
26 2.35 5.67 11.03 26.57 38.71 51.69 76.29 100.55 148.40 195.60 288.68 380.51 385.66 293.38 232.81 190.55 159.69 37.53
28 2.53 6.10 11.87 28.61 41.69 55.66 82.15 108.28 159.81 210.65 310.89 409.77 431.00 327.87 260.19 212.96 146.32
30 2.71 6.54 12.72 30.66 44.67 59.64 88.02 116.02 171.23 225.69 333.09 439.04 477.99 363.62 288.56 236.18 30.96
32 2.89 6.98 13.57 32.70 47.65 63.62 93.89 123.75 182.64 240.74 355.30 468.31 526.58 400.58 317.89 199.60
35 3.17 7.63 14.84 35.77 52.11 69.58 102.69 135.36 199.77 263.31 388.61 512.22 602.34 458.22 363.62 28.22

Maintenance
Reduced
40 3.62 8.72 16.96 40.88 59.56 79.52 117.36 154.69 228.31 300.93 444.13 585.39 725.24 559.83 123.60
45 4.07 9.81 19.08 45.99 67.00 89.46 132.03 174.03 256.84 338.54 499.64 658.57 750.00 333.00
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x

Attachments
#180H Roller Chain - Metric Units (Kilowatts)
# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 2 5 10 25 37 50 75 100 150 200 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600 1,800
11 0.74 1.79 3.47 8.38 12.21 16.31 24.06 31.72 46.82 61.71 91.07 110.60 79.14 60.20 47.78 39.10 32.77 27.98 24.25 21.28 16.89 13.83 11.59
12 0.81 1.95 3.80 9.14 13.33 17.79 26.26 34.61 51.07 67.32 99.36 126.02 90.17 68.60 54.44 44.56 37.34 31.88 27.64 24.25 19.25 15.75 1.79
13 0.88 2.11 4.11 9.91 14.44 19.27 28.44 37.49 55.33 72.93 107.63 141.87 101.68 77.34 61.38 50.24 42.10 35.95 31.16 27.34 21.70 17.76
14 0.95 2.27 4.43 10.67 15.55 20.75 30.63 40.37 59.59 78.54 115.91 152.79 113.63 86.44 68.60 56.14 47.05 40.17 34.82 30.56 24.25 7.63

Horsepower
15 1.01 2.44 4.74 11.43 16.65 22.24 32.82 43.26 63.84 84.15 124.20 163.70 126.02 95.87 76.08 62.27 52.18 44.56 38.62 33.89 26.90

Tables
16 1.08 2.60 5.06 12.19 17.76 23.72 35.00 46.14 68.10 89.76 132.47 174.61 138.83 105.61 83.81 68.60 57.49 49.08 42.54 37.34 29.63
17 1.15 2.77 5.38 12.95 18.87 25.20 37.20 49.02 72.36 95.37 140.75 185.52 152.05 115.67 91.79 75.13 62.96 53.76 46.60 40.89
18 1.22 2.92 5.69 13.72 19.98 26.68 39.38 51.91 76.61 100.98 149.04 196.44 165.66 126.02 100.01 81.86 68.60 58.57 50.77 44.56
19 1.28 3.09 6.01 14.48 21.10 28.17 41.57 54.79 80.87 106.59 157.31 207.35 179.65 136.66 108.45 88.77 74.39 63.52 55.06 48.32
20 1.35 3.25 6.32 15.24 22.21 29.65 43.76 57.68 85.12 112.20 165.59 218.27 194.02 147.60 117.13 95.87 80.34 68.60 59.46 41.24

Components
Chain
21 1.42 3.42 6.64 16.00 23.32 31.13 45.95 60.56 89.38 117.81 173.87 229.18 208.75 158.80 126.02 103.15 86.44 73.80 63.97
22 1.48 3.58 6.96 16.76 24.43 32.62 48.13 63.44 93.64 123.42 182.15 240.09 223.84 170.28 135.13 110.60 92.69 79.14 65.14
23 1.55 3.74 7.27 17.52 25.54 34.09 50.32 66.33 97.90 129.03 190.43 251.00 239.27 182.03 144.44 118.22 99.08 84.60 21.86
24 1.62 3.90 7.59 18.29 26.65 35.58 52.51 69.22 102.15 134.64 198.71 261.92 255.04 194.02 153.96 126.02 105.61 90.17
25 1.69 4.06 7.90 19.05 27.75 37.06 54.70 72.09 106.40 140.25 206.99 272.83 271.15 206.28 163.69 133.98 112.28 71.71
Troubleshooting

26 1.75 4.23 8.23 19.81 28.87 38.55 56.89 74.98 110.66 145.86 215.27 283.75 287.59 218.77 173.61 142.09 119.08 27.99
Tools,

28 1.89 4.55 8.85 21.33 31.09 41.51 61.26 80.74 119.17 157.08 231.83 305.57 321.40 244.49 194.02 158.80 109.11
30 2.02 4.88 9.49 22.86 33.31 44.47 65.64 86.52 127.69 168.30 248.39 327.39 356.44 271.15 215.18 176.12 23.09
32 2.16 5.20 10.12 24.38 35.53 47.44 70.01 92.28 136.19 179.52 264.95 349.22 392.67 298.71 237.05 148.84
35 2.36 5.69 11.07 26.67 38.86 51.89 76.58 100.94 148.97 196.35 289.79 381.96 449.16 341.69 271.15 21.04

40 2.70 6.50 12.65 30.48 44.41 59.30 87.52 115.35 170.25 224.40 331.19 436.53 540.81 417.47 92.17
Information
Ordering

45 3.03 7.32 14.23 34.29 49.96 66.71 98.45 129.77 191.53 252.45 372.58 491.10 559.28 248.32
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 73

 Diamond
Chain

Heavy Series Horsepower Tables

#200H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket
Difference
Diamond

teeth in
small
sprocket 2 5 10 25 33 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600
11 1.37 3.31 6.44 15.51 20.25 30.17 44.53 58.70 86.63 114.18 141.46 168.52 161.36 115.46 87.83 69.70 57.05 47.81 40.82 35.38 31.05 24.64 20.17
12 1.50 3.61 7.02 16.92 22.09 32.92 48.58 64.03 94.51 124.57 154.32 183.84 183.86 131.56 100.08 79.42 65.00 54.48 46.51 40.32 35.38 28.08 18.78
13 1.62 3.91 7.61 18.33 23.93 35.66 52.63 69.37 102.38 134.95 167.18 199.16 207.31 148.34 112.85 89.55 73.30 61.43 52.45 45.46 39.90 31.66
14 1.75 4.21 8.19 19.74 25.77 38.40 56.68 74.71 110.26 145.33 180.04 214.48 231.69 165.78 126.11 100.08 81.91 68.65 58.61 50.80 44.59 35.38
Selection
Guide

15 1.87 4.51 8.78 21.15 27.61 41.15 60.73 80.04 118.13 155.71 192.90 229.80 256.95 183.86 139.87 110.99 90.85 76.13 65.00 56.34 49.45

16 2.00 4.81 9.36 22.56 29.45 43.89 64.77 85.38 126.01 166.09 205.76 245.12 283.07 202.55 154.08 122.27 100.08 83.87 71.61 62.07 54.48
17 2.12 5.11 9.95 23.97 31.29 46.63 68.82 90.71 133.88 176.47 218.62 260.44 310.02 221.83 168.75 133.91 109.61 91.86 78.43 67.98 59.66
18 2.25 5.41 10.53 25.38 33.13 49.38 72.87 96.05 141.76 186.85 231.48 275.76 337.77 241.69 183.86 145.90 119.42 100.08 85.45 74.07 11.75
19 2.37 5.71 11.12 26.79 34.97 52.12 76.92 101.39 149.63 197.23 244.35 291.08 366.30 262.11 199.39 158.23 129.51 108.53 92.67 80.32
20 2.50 6.02 11.70 28.20 36.82 54.86 80.97 106.72 157.51 207.61 257.21 306.40 395.60 283.07 215.34 170.88 139.87 117.21 100.08 31.07
Carbon
Steel

21 2.62 6.32 12.29 29.61 38.66 57.60 85.02 112.06 165.38 217.99 270.07 321.72 425.64 304.56 231.69 183.86 150.49 126.11 107.68
22 2.75 6.62 12.87 31.02 40.50 60.35 89.07 117.40 173.26 228.37 282.93 337.04 456.40 326.57 248.43 197.15 161.36 135.23 86.70
23 2.87 6.92 13.46 32.43 42.34 63.09 93.11 122.73 181.14 238.75 295.79 352.36 464.44 349.09 265.56 210.74 172.49 144.55 11.76
24 3.00 7.22 14.04 33.84 44.18 65.83 97.16 128.07 189.01 249.13 308.65 367.68 484.64 372.10 283.07 224.63 183.86 154.08
25 3.12 7.52 14.63 35.25 46.02 68.58 101.21 133.40 196.89 259.51 321.51 383.00 504.83 395.60 300.94 238.82 195.47 118.72
& Moisture
Corrosion
Resistant

26 3.24 7.82 15.21 36.66 47.86 71.32 105.26 138.74 204.76 269.89 334.37 398.32 525.02 419.57 319.18 253.29 207.31 46.33
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Maintenance
Reduced
Attachments

#200H Roller Chain - Metric Units (Kilowatts)

# of
teeth in Revolutions Per Minute – Small Sprocket
Application

small
Specific

sprocket 2 5 10 25 33 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,400 1,600
11 1.02 2.47 4.80 11.57 15.10 22.50 33.21 43.77 64.60 85.14 105.49 125.67 120.33 86.10 65.49 51.98 42.54 35.65 30.44 26.38 23.15 18.37 15.04
12 1.12 2.69 5.23 12.62 16.47 24.55 36.23 47.75 70.48 92.89 115.08 137.09 137.10 98.10 74.63 59.22 48.47 40.63 34.68 30.07 26.38 20.94 14.00
13 1.21 2.92 5.67 13.67 17.84 26.59 39.25 51.73 76.34 100.63 124.67 148.51 154.59 110.62 84.15 66.78 54.66 45.81 39.11 33.90 29.75 23.61
14 1.30 3.14 6.11 14.72 19.22 28.63 42.27 55.71 82.22 108.37 134.26 159.94 172.77 123.62 94.04 74.63 61.08 51.19 43.71 37.88 33.25 26.38
Horsepower

15 1.39 3.36 6.55 15.77 20.59 30.69 45.29 59.69 88.09 116.11 143.85 171.36 191.61 137.10 104.30 82.77 67.75 56.77 48.47 42.01 36.87
Tables

16 1.49 3.59 6.98 16.82 21.96 32.73 48.30 63.67 93.97 123.85 153.44 182.79 211.09 151.04 114.90 91.18 74.63 62.54 53.40 46.29 40.63
17 1.58 3.81 7.42 17.87 23.33 34.77 51.32 67.64 99.83 131.59 163.02 194.21 231.18 165.42 125.84 99.86 81.74 68.50 58.49 50.69 44.49
18 1.68 4.03 7.85 18.93 24.71 36.82 54.34 71.62 105.71 139.33 172.61 205.63 251.88 180.23 137.10 108.80 89.05 74.63 63.72 55.23 8.76
19 1.77 4.26 8.29 19.98 26.08 38.87 57.36 75.61 111.58 147.07 182.21 217.06 273.15 195.46 148.69 117.99 96.58 80.93 69.10 59.89
20 1.86 4.49 8.72 21.03 27.46 40.91 60.38 79.58 117.46 154.81 191.80 228.48 295.00 211.09 160.58 127.43 104.30 87.40 74.63 23.17
Components
Chain

21 1.95 4.71 9.16 22.08 28.83 42.95 63.40 83.56 123.32 162.56 201.39 239.91 317.40 227.11 172.77 137.10 112.22 94.04 80.30
22 2.05 4.94 9.60 23.13 30.20 45.00 66.42 87.55 129.20 170.30 210.98 251.33 340.34 243.52 185.25 147.01 120.33 100.84 64.65
23 2.14 5.16 10.04 24.18 31.57 47.05 69.43 91.52 135.08 178.04 220.57 262.75 346.33 260.32 198.03 157.15 128.63 107.79 8.77
24 2.24 5.38 10.47 25.23 32.95 49.09 72.45 95.50 140.94 185.78 230.16 274.18 361.40 277.47 211.09 167.51 137.10 114.90
25 2.33 5.61 10.91 26.29 34.32 51.14 75.47 99.48 146.82 193.52 239.75 285.60 376.45 295.00 224.41 178.09 145.76 88.53
Troubleshooting

26 2.42 5.83 11.34 27.34 35.69 53.18 78.49 103.46 152.69 201.26 249.34 297.03 391.51 312.87 238.01 188.88 154.59 34.55
Tools,

Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Information
Ordering
Conditions
Terms and

74 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Heavy Series Horsepower Tables
#240H Roller Chain - Imperial Units (Horsepower)
# of
Revolutions Per Minute – Small Sprocket

Difference
Diamond
teeth in
small
sprocket 2 5 10 25 36 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400
11 2.33 5.62 10.93 26.33 28.35 51.23 75.60 99.65 147.07 193.85 240.16 286.10 186.70 133.59 101.63 80.65 66.01 55.32 47.23 40.94 35.93 31.87 28.51
12 2.54 6.13 11.92 28.73 30.93 55.88 82.48 108.71 160.44 211.48 262.00 312.11 212.73 152.22 115.80 91.89 75.21 63.03 53.82 46.65 40.94 36.31
13 2.75 6.64 12.91 31.12 33.51 60.54 89.35 117.77 173.81 229.10 283.83 338.12 239.87 171.64 130.57 103.61 84.81 71.07 60.68 52.60 46.16
14 2.97 7.15 13.91 33.52 36.09 65.20 96.22 126.83 187.18 246.72 305.66 364.13 268.07 191.82 145.92 115.80 94.78 79.43 67.82 58.78 18.18

Selection
Guide
15 3.18 7.66 14.90 35.91 38.66 69.85 103.10 135.89 200.55 264.35 327.50 390.14 297.30 212.73 161.83 128.42 105.11 88.09 75.21 65.19

16 3.39 8.17 15.89 38.30 41.24 74.51 109.97 144.95 213.92 281.97 349.33 416.15 327.52 234.35 178.28 141.47 115.80 97.04 82.86
17 3.60 8.68 16.89 40.70 43.82 79.17 116.84 154.01 227.29 299.59 371.16 442.16 358.70 256.66 195.25 154.94 126.82 106.28 90.74
18 3.81 9.19 17.88 43.09 46.40 83.83 123.72 163.07 240.66 317.21 392.99 468.17 390.81 279.64 212.73 168.81 138.17 115.80 16.92
19 4.03 9.70 18.87 45.48 48.97 88.48 130.59 172.13 254.03 334.84 414.83 494.18 423.82 303.26 230.70 183.08 149.84 125.58
20 4.24 10.21 19.87 47.88 51.55 93.14 137.46 181.18 267.40 352.46 436.66 520.19 457.72 327.52 249.15 197.72 161.83 98.33

Carbon
Steel
21 4.45 10.72 20.86 50.27 54.13 97.80 144.33 190.24 280.78 370.08 458.49 546.19 492.48 352.39 268.07 212.73 174.12
22 4.66 11.23 21.85 52.67 56.71 102.45 151.21 199.30 294.15 387.71 480.33 572.20 528.07 377.85 287.44 228.10 186.70
23 4.87 11.74 22.85 55.06 59.28 107.11 158.08 208.36 307.52 405.33 502.16 598.21 564.48 403.91 307.26 243.83 153.53
24 5.09 12.26 23.84 57.45 61.86 111.77 164.95 217.42 320.89 422.95 523.99 624.22 601.69 430.53 327.52 259.91 48.97
25 5.30 12.77 24.83 59.85 64.44 116.42 171.83 226.48 334.26 440.58 545.83 650.23 639.68 457.72 348.20 276.32

& Moisture
Corrosion

Resistant
26 5.51 13.28 25.83 62.24 67.02 121.08 178.70 235.54 347.63 458.20 567.66 676.24 678.45 485.46 369.30 293.06
Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x

Maintenance
Reduced
Attachments
#240H Roller Chain - Metric Units (Kilowatts)
# of
teeth in Revolutions Per Minute – Small Sprocket

Application
small

Specific
sprocket 2 5 10 25 36 50 75 100 150 200 250 300 400 500 600 700 800 900 1,000 1,100 1,200 1,300 1,400
11 1.74 4.19 8.15 19.63 21.14 38.20 56.37 74.31 109.67 144.55 179.09 213.34 139.22 99.62 75.79 60.14 49.22 41.25 35.22 30.53 26.79 23.77 21.26
12 1.89 4.57 8.89 21.42 23.06 41.67 61.51 81.07 119.64 157.70 195.37 232.74 158.63 113.51 86.35 68.52 56.08 47.00 40.13 34.79 30.53 27.08
13 2.05 4.95 9.63 23.21 24.99 45.14 66.63 87.82 129.61 170.84 211.65 252.14 178.87 127.99 97.37 77.26 63.24 53.00 45.25 39.22 34.42
14 2.21 5.33 10.37 25.00 26.91 48.62 71.75 94.58 139.58 183.98 227.93 271.53 199.90 143.04 108.81 86.35 70.68 59.23 50.57 43.83 13.56

Horsepower
15 2.37 5.71 11.11 26.78 28.83 52.09 76.88 101.33 149.55 197.13 244.22 290.93 221.70 158.63 120.68 95.76 78.38 65.69 56.08 48.61

Tables
16 2.53 6.09 11.85 28.56 30.75 55.56 82.00 108.09 159.52 210.27 260.50 310.32 244.23 174.75 132.94 105.49 86.35 72.36 61.79
17 2.68 6.47 12.59 30.35 32.68 59.04 87.13 114.85 169.49 223.40 276.77 329.72 267.48 191.39 145.60 115.54 94.57 79.25 67.66
18 2.84 6.85 13.33 32.13 34.60 62.51 92.26 121.60 179.46 236.54 293.05 349.11 291.43 208.53 158.63 125.88 103.03 86.35 12.62
19 3.01 7.23 14.07 33.91 36.52 65.98 97.38 128.36 189.43 249.69 309.34 368.51 316.04 226.14 172.03 136.52 111.74 93.65
20 3.16 7.61 14.82 35.70 38.44 69.45 102.50 135.11 199.40 262.83 325.62 387.91 341.32 244.23 185.79 147.44 120.68 73.32

Components
Chain
21 3.32 7.99 15.56 37.49 40.36 72.93 107.63 141.86 209.38 275.97 341.90 407.29 367.24 262.78 199.90 158.63 129.84
22 3.47 8.37 16.29 39.28 42.29 76.40 112.76 148.62 219.35 289.12 358.18 426.69 393.78 281.76 214.34 170.09 139.22
23 3.63 8.75 17.04 41.06 44.21 79.87 117.88 155.37 229.32 302.25 374.46 446.09 420.93 301.20 229.12 181.82 114.49
24 3.80 9.14 17.78 42.84 46.13 83.35 123.00 162.13 239.29 315.39 390.74 465.48 448.68 321.05 244.23 193.81 36.52
25 3.95 9.52 18.52 44.63 48.05 86.81 128.13 168.89 249.26 328.54 407.03 484.88 477.01 341.32 259.65 206.05
Troubleshooting

26 4.11 9.90 19.26 46.41 49.98 90.29 133.26 175.64 259.23 341.68 423.30 504.27 505.92 362.01 275.39 218.53
Tools,

Lubrication Type A (Manual or Drip) Type B (Oil Bath or Slinger) Type C (Oil Pump)
Note: If using multiple strand chain, multiply horsepower rating by the following: For optimum results, contact Diamond Chain technical support for drives operating in the shaded area
2 strands: 1.7x
3 strands: 2.5x
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 75

 Diamond
Chain

Double Pitch Series Horsepower Tables

#2040 Double Pitch Roller Chain - Imperial Units (Horsepower)
# of teeth Revolutions Per Minute – Small Sprocket
Difference
Diamond

in small
sprocket 25 50 100 150 200 250 300 350 400 450 500 550 600 700 800 900 1,000 1,100 1,200 1,300
6 0.10 0.17
7 0.12 0.21 0.36 0.47 0.55
8 0.14 0.26 0.45 0.64 0.73 0.82 0.90
9 0.16 0.30 0.53 0.72 0.89 1.03 1.14 1.24 1.32
10 0.18 0.34 0.61 0.84 1.04 1.22 1.37 1.50 1.62 1.71 1.79 1.86
Selection
Guide

11 0.20 0.38 0.69 0.96 1.19 1.40 1.59 1.76 1.90 2.03 2.14 2.24 2.32
12 0.22 0.42 0.77 1.07 1.34 1.58 1.80 2.00 2.17 2.33 2.47 2.60 2.70 2.88
13 0.24 0.46 0.84 1.18 1.48 1.76 2.01 2.23 2.44 2.62 2.79 2.94 3.07 3.30 3.47
14 0.26 0.50 0.92 1.29 1.62 1.93 2.20 2.46 2.69 2.90 3.09 3.27 3.43 3.70 3.91 4.07
15 0.28 0.54 0.99 1.39 1.76 2.09 2.40 2.68 2.94 3.17 3.39 3.59 3.77 4.08 4.33 4.52 4.66

16 0.30 0.57 1.06 1.50 1.89 2.25 2.59 2.89 3.17 3.43 3.67 3.89 4.09 4.44 4.73 4.96 5.13
Carbon
Steel

17 0.32 0.61 1.13 1.60 2.02 2.41 2.77 3.10 3.41 3.69 3.95 4.19 4.41 4.79 5.11 5.37 5.57 5.72
18 0.34 0.65 1.20 1.70 2.15 2.57 2.95 3.30 3.63 3.93 4.21 4.47 4.71 5.13 5.48 5.77 5.99 6.16
19 0.36 0.68 1.27 1.80 2.28 2.72 3.12 3.50 3.85 4.17 4.47 4.75 5.01 5.46 5.83 6.14 6.39 6.58 6.71
20 0.38 0.72 1.34 1.89 2.40 2.87 3.30 3.70 4.07 4.41 4.73 5.02 5.29 5.77 6.17 6.51 6.77 6.97 7.11

21 0.40 0.76 1.41 1.99 2.52 3.01 3.47 3.89 4.28 4.64 4.97 5.28 5.57 6.07 6.50 6.85 7.13 7.35 7.50
& Moisture
Corrosion
Resistant

22 0.42 0.79 1.47 2.09 2.64 3.16 3.63 4.07 4.48 4.86 5.21 5.53 5.83 6.37 6.81 7.18 7.48 7.70 7.87
23 0.44 0.83 1.54 2.18 2.76 3.30 3.80 4.26 4.68 5.08 5.44 5.78 6.09 6.60 7.12 7.50 7.81 8.04 8.21 8.31
24 0.46 0.87 1.61 2.27 2.88 3.44 3.96 4.43 4.88 5.29 5.67 6.02 6.35 6.92 7.41 7.80 8.12 8.36 8.53 8.64
25 0.48 0.90 1.67 2.36 3.00 3.58 4.11 4.61 5.07 5.50 5.89 6.26 6.59 7.19 7.69 8.10 8.42 8.67 8.84 8.94

30 0.57 1.08 1.99 2.81 3.56 4.24 4.87 5.45 5.98 6.47 6.93 7.34 7.80 8.39 8.94 9.39 9.72 9.96 10.11 10.10
35 0.66 1.25 2.30 3.24 4.09 4.86 5.57 6.21 6.81 7.35 7.85 8.30 8.72 9.43 9.99 10.43 10.73 10.93 11.01
Maintenance
Reduced

40 0.75 1.41 2.60 3.65 4.59 5.44 6.22 6.93 7.57 8.15 8.68 9.16 9.59 10.31 10.86 11.20 11.50 11.61
45 0.84 1.58 2.89 4.04 5.07 6.00 6.83 7.59 8.27 8.88 9.43 9.92 10.30 11.00 11.56 11.88 12.03
50 0.93 1.74 3.17 4.42 5.53 6.52 7.41 8.20 8.91 9.54 10.10 10.59 11.01 11.67 12.11 12.33

55 1.01 1.90 3.44 4.79 5.97 7.02 7.95 8.77 9.50 10.20 10.70 11.17 11.58 12.18
60 1.10 2.05 3.71 5.14 6.39 7.49 8.46 9.31 10.00 10.68 11.23 11.69 12.06
Attachments

Type A: Manual (4-10 drops/ Type B: Rapid Drip (20 drops/min)

Lubrication Type C: Continuous with Oil Slinger or Oil Stream
min) or Oil Bath or Oil Bath or Slinger

#2040 Double Pitch Roller Chain - Metric Units (Kilowatts)

# of teeth
in small
Revolutions Per Minute – Small Sprocket
sprocket
Application

25 50 100 150 200 250 300 350 400 450 500 550 600 700 800 900 1,000 1,100 1,200 1,300
Specific

6 0.07 0.13
7 0.09 0.16 0.27 0.35 0.41
8 0.10 0.19 0.34 0.48 0.54 0.61 0.67
9 0.12 0.22 0.40 0.54 0.66 0.77 0.85 0.92 0.98
10 0.13 0.25 0.45 0.63 0.78 0.91 1.02 1.12 1.21 1.28 1.33 1.39
Horsepower

11 0.15 0.28 0.51 0.72 0.89 1.04 1.19 1.31 1.42 1.51 1.60 1.67 1.73
Tables

12 0.16 0.31 0.57 0.80 1.00 1.18 1.34 1.49 1.62 1.74 1.84 1.94 2.01 2.15
13 0.18 0.34 0.63 0.88 1.10 1.31 1.50 1.66 1.82 1.95 2.08 2.19 2.29 2.46 2.59
14 0.19 0.37 0.69 0.96 1.21 1.44 1.64 1.83 2.01 2.16 2.30 2.44 2.56 2.76 2.92 3.03
15 0.21 0.40 0.74 1.04 1.31 1.56 1.79 2.00 2.19 2.36 2.53 2.68 2.81 3.04 3.23 3.37 3.47

16 0.22 0.43 0.79 1.12 1.41 1.68 1.93 2.16 2.36 2.56 2.74 2.90 3.05 3.31 3.53 3.70 3.83
Components

17 0.24 0.45 0.84 1.19 1.51 1.80 2.07 2.31 2.54 2.75 2.95 3.12 3.29 3.57 3.81 4.00 4.15 4.27
Chain

18 0.25 0.48 0.89 1.27 1.60 1.92 2.20 2.46 2.71 2.93 3.14 3.33 3.51 3.83 4.09 4.30 4.47 4.59
19 0.27 0.51 0.95 1.34 1.70 2.03 2.33 2.61 2.87 3.11 3.33 3.54 3.74 4.07 4.35 4.58 4.77 4.91 5.00
20 0.28 0.54 1.00 1.41 1.79 2.14 2.46 2.76 3.03 3.29 3.53 3.74 3.94 4.30 4.60 4.85 5.05 5.20 5.30

21 0.30 0.57 1.05 1.48 1.88 2.24 2.59 2.90 3.19 3.46 3.71 3.94 4.15 4.53 4.85 5.11 5.32 5.48 5.59
Troubleshooting

22 0.31 0.59 1.10 1.56 1.97 2.36 2.71 3.03 3.34 3.62 3.89 4.12 4.35 4.75 5.08 5.35 5.58 5.74 5.87
23 0.33 0.62 1.15 1.63 2.06 2.46 2.83 3.18 3.49 3.79 4.06 4.31 4.54 4.92 5.31 5.59 5.82 6.00 6.12 6.20
Tools,

24 0.34 0.65 1.20 1.69 2.15 2.57 2.95 3.30 3.64 3.94 4.23 4.49 4.74 5.16 5.53 5.82 6.06 6.23 6.36 6.44
25 0.36 0.67 1.25 1.76 2.24 2.67 3.06 3.44 3.78 4.10 4.39 4.67 4.91 5.36 5.73 6.04 6.28 6.47 6.59 6.67

30 0.43 0.81 1.48 2.10 2.65 3.16 3.63 4.06 4.46 4.82 5.17 5.47 5.82 6.26 6.67 7.00 7.25 7.43 7.54 7.53
35 0.49 0.93 1.72 2.42 3.05 3.62 4.15 4.63 5.08 5.48 5.85 6.19 6.50 7.03 7.45 7.78 8.00 8.15 8.21
40 0.56 1.05 1.94 2.72 3.42 4.06 4.64 5.17 5.64 6.08 6.47 6.83 7.15 7.69 8.10 8.35 8.58 8.66
Information
Ordering

45 0.63 1.18 2.16 3.01 3.78 4.47 5.09 5.66 6.17 6.62 7.03 7.40 7.68 8.20 8.62 8.86 8.97
50 0.69 1.30 2.36 3.30 4.12 4.86 5.53 6.11 6.64 7.11 7.53 7.90 8.21 8.70 9.03 9.19

55 0.75 1.42 2.57 3.57 4.45 5.23 5.93 6.54 7.08 7.61 7.98 8.33 8.64 9.08
60 0.82 1.53 2.77 3.83 4.77 5.59 6.31 6.94 7.46 7.96 8.37 8.72 8.99
Type A: Manual (4-10 drops/ Type B: Rapid Drip (20 drops/min)
Lubrication Type C: Continuous with Oil Slinger or Oil Stream
min) or Oil Bath or Oil Bath or Slinger
Conditions
Terms and

76 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Double Pitch Series Horsepower Tables
#2050 Double Pitch Roller Chain - Imperial Units (Horsepower)
# of teeth Revolutions Per Minute – Small Sprocket

Difference
Diamond
in small
sprocket 25 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950
6 0.18 0.31
7 0.22 0.40 0.66
8 0.27 0.48 0.83 1.09 1.29
9 0.31 0.56 0.99 1.33 1.60 1.83 2.00
10 0.35 0.64 1.14 1.56 1.90 2.20 2.44 2.64 2.80

Selection
Guide
11 0.39 0.72 1.29 1.78 2.19 2.55 2.86 3.12 3.34 3.53
12 0.43 0.80 1.44 1.99 2.47 2.89 3.26 3.58 3.86 4.10 4.30
13 0.47 0.87 1.59 2.20 2.75 3.23 3.65 4.03 4.36 4.65 4.90 5.11 5.29
14 0.51 0.95 1.73 2.41 3.01 3.55 4.03 4.45 4.83 5.17 5.47 5.73 5.95 6.09
15 0.54 1.02 1.87 2.61 3.27 3.86 4.39 4.87 5.29 5.68 6.02 6.32 6.58 6.75 6.94

16 0.58 1.09 2.01 2.81 3.52 4.16 4.74 5.27 5.74 6.16 6.54 6.88 7.18 7.39 7.61 779.00

Carbon
Steel
17 0.62 1.17 2.14 3.00 3.77 4.46 5.09 5.65 6.17 6.63 7.05 7.42 7.75 7.99 8.24 8.46 8.62
18 0.66 1.24 2.27 3.19 4.01 4.75 5.42 6.03 6.58 7.09 7.54 7.94 8.31 8.56 8.84 9.08 9.28
19 0.69 1.31 2.41 3.38 4.25 5.03 5.75 6.40 6.99 7.52 8.01 8.45 8.84 9.12 9.42 9.68 9.90 10.08
20 0.73 1.38 2.54 3.56 4.48 5.31 6.07 6.76 7.38 7.95 8.47 8.93 9.35 9.65 9.97 10.25 10.49 10.69

21 0.77 1.45 2.67 3.74 4.71 5.59 6.38 7.11 7.77 8.37 8.91 9.40 9.84 10.16 10.50 10.80 11.06 11.28 11.44

& Moisture
Corrosion

Resistant
22 0.81 1.52 2.79 3.92 4.93 5.85 6.69 7.45 8.14 8.77 9.34 9.85 10.31 10.65 11.01 11.32 11.59 11.83 12.00
23 0.84 1.59 2.92 4.10 5.16 6.12 6.99 7.78 8.50 9.16 9.75 10.29 10.77 11.12 11.50 11.82 12.10 12.35 12.53
24 0.88 1.66 3.04 4.27 5.37 6.37 7.28 8.11 8.86 9.54 10.16 10.71 11.21 11.57 11.97 12.30 12.59 12.85 13.03
25 0.91 1.72 3.17 4.44 5.59 6.63 7.57 8.43 9.20 9.91 10.55 11.12 11.64 12.01 12.42 12.75 13.05 13.33 13.50 13.57

30 1.09 2.06 3.77 5.28 6.62 7.84 8.93 9.93 10.82 11.63 12.35 13.00 13.57 13.96 14.39 14.76 15.06 15.30 15.48
35 1.27 2.38 4.35 6.07 7.59 8.96 10.18 11.28 12.27 13.14 13.92 14.60 15.20 15.58 16.00 16.35 16.62 16.82 16.94

Maintenance
Reduced
40 1.44 2.70 4.90 6.82 8.51 10.01 11.34 12.52 13.56 14.48 15.29 15.98 16.56 16.92 17.29 17.58 17.78
45 1.61 3.00 5.44 7.54 9.37 10.98 12.40 13.65 14.73 15.67 16.47 17.15 17.70 17.96 18.29 18.49
50 1.78 3.31 5.96 8.23 10.19 11.90 13.39 14.67 15.78 16.71 17.49 18.08 18.62 18.80

55 1.95 3.60 6.45 8.90 10.95 12.75 14.30 15.60 16.67 17.57 18.37 18.91
60 2.11 3.90 6.95 9.52 11.70 13.55 15.12 16.45 17.54
Type A: Manual (4-10 Type B: Rapid Drip (20 drops/min)

Attachments
Lubrication Type C: Continuous with Oil Slinger or Oil Stream
drops/min) or Oil Bath or Oil Bath or Slinger

#2050 Double Pitch Roller Chain - Metric Units (Kilowatts)

# of teeth
in small
Revolutions Per Minute – Small Sprocket
sprocket

Application
25 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950

Specific
6 0.13 0.23
7 0.16 0.30 0.49
8 0.20 0.36 0.62 0.81 0.96
9 0.23 0.42 0.74 0.99 1.19 1.36 1.49
10 0.26 0.48 0.85 1.16 1.42 1.64 1.82 1.97 2.09

Horsepower
11 0.29 0.54 0.96 1.33 1.63 1.90 2.13 2.33 2.49 2.63

Tables
12 0.32 0.60 1.07 1.48 1.84 2.16 2.43 2.67 2.88 3.06 3.21
13 0.35 0.65 1.19 1.64 2.05 2.41 2.72 3.01 3.25 3.47 3.65 3.81 3.94
14 0.38 0.71 1.29 1.80 2.24 2.65 3.01 3.32 3.60 3.86 4.08 4.27 4.44 4.54
15 0.40 0.76 1.39 1.95 2.44 2.88 3.27 3.63 3.94 4.24 4.49 4.71 4.91 5.03 5.18

16 0.43 0.81 1.50 2.10 2.62 3.10 3.53 3.93 4.28 4.59 4.88 5.13 5.35 5.51 5.67 580.90

Components
17 0.46 0.87 1.60 2.24 2.81 3.33 3.80 4.21 4.60 4.94 5.26 5.53 5.78 5.96 6.14 6.31 6.43

Chain
18 0.49 0.92 1.69 2.38 2.99 3.54 4.04 4.50 4.91 5.29 5.62 5.92 6.20 6.38 6.59 6.77 6.92
19 0.51 0.98 1.80 2.52 3.17 3.75 4.29 4.77 5.21 5.61 5.97 6.30 6.59 6.80 7.02 7.22 7.38 7.52
20 0.54 1.03 1.89 2.65 3.34 3.96 4.53 5.04 5.50 5.93 6.32 6.66 6.97 7.20 7.43 7.64 7.82 7.97

21 0.57 1.08 1.99 2.79 3.51 4.17 4.76 5.30 5.79 6.24 6.64 7.01 7.34 7.58 7.83 8.05 8.25 8.41 8.53
Troubleshooting

22 0.60 1.13 2.08 2.92 3.68 4.36 4.99 5.56 6.07 6.54 6.96 7.35 7.69 7.94 8.21 8.44 8.64 8.82 8.95
23 0.63 1.19 2.18 3.06 3.85 4.56 5.21 5.80 6.34 6.83 7.27 7.67 8.03 8.29 8.58 8.81 9.02 9.21 9.34
Tools,

24 0.66 1.24 2.27 3.18 4.00 4.75 5.43 6.05 6.61 7.11 7.58 7.99 8.36 8.63 8.93 9.17 9.39 9.58 9.72
25 0.68 1.28 2.36 3.31 4.17 4.94 5.64 6.29 6.86 7.39 7.87 8.29 8.68 8.96 9.26 9.51 9.73 9.94 10.07 10.12

30 0.81 1.54 2.81 3.94 4.94 5.85 6.66 7.40 8.07 8.67 9.21 9.69 10.12 10.41 10.73 11.01 11.23 11.41 11.54
35 0.95 1.77 3.24 4.53 5.66 6.68 7.59 8.41 9.15 9.80 10.38 10.89 11.33 11.62 11.93 12.19 12.39 12.54 12.63
40 1.07 2.01 3.65 5.09 6.35 7.46 8.46 9.34 10.11 10.80 11.40 11.92 12.35 12.62 12.89 13.11 13.26
Information

45 1.20 2.24 4.06 5.62 6.99 8.19 9.25 10.18 10.98 11.69 12.28 12.79 13.20 13.39 13.64 13.79
Ordering

50 1.33 2.47 4.44 6.14 7.60 8.87 9.98 10.94 11.77 12.46 13.04 13.48 13.88 14.02

55 1.45 2.68 4.81 6.64 8.17 9.51 10.66 11.63 12.43 13.10 13.70 14.10
60 1.57 2.91 5.18 7.10 8.72 10.10 11.27 12.27 13.08
Type A: Manual (4-10 Type B: Rapid Drip (20 drops/min)
Lubrication Type C: Continuous with Oil Slinger or Oil Stream
drops/min) or Oil Bath or Oil Bath or Slinger
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 77

 Diamond
Chain

Double Pitch Series Horsepower Tables

#2060 Double Pitch Roller Chain - Imperial Units (Horsepower)
# of teeth Revolutions Per Minute – Small Sprocket
Difference
Diamond

in small
sprocket 25 50 75 100 125 150 175 200 225 250 275 300 350 400 450 500 550 600 650 700
6 0.30
7 0.38 0.66 0.88 1.06
8 0.45 0.80 1.10 1.35 1.57 1.75 1.90
9 0.52 0.94 1.31 1.63 1.91 2.16 2.38 2.57 2.74
10 0.59 1.08 1.51 1.90 2.24 2.55 2.83 3.09 3.31 3.51 3.69 3.85
Selection
Guide

11 0.66 1.22 1.71 2.16 2.56 2.93 3.27 3.58 3.86 4.12 4.35 4.57 4.93
12 0.73 1.35 1.90 2.41 2.87 3.30 3.69 4.05 4.39 4.70 4.98 5.25 5.71 6.09
13 0.79 1.48 2.09 2.65 3.17 3.65 4.10 4.51 4.90 5.26 5.59 5.90 6.45 6.92 7.25
14 0.86 1.60 2.28 2.90 3.47 4.00 4.50 4.96 5.39 5.80 6.18 6.53 7.16 7.71 8.10 8.51
15 0.93 1.73 2.46 3.13 3.76 4.34 4.88 5.39 5.87 6.32 6.74 7.14 7.85 8.48 8.92 9.40

16 0.99 1.85 2.64 3.37 4.04 4.67 5.26 5.82 6.34 6.83 7.29 7.73 8.52 9.21 9.71 10.25 10.70
Carbon
Steel

17 1.06 1.98 2.82 3.59 4.32 5.00 5.63 6.23 6.79 7.33 7.83 8.30 9.16 9.92 10.47 11.06 11.59 11.99
18 1.12 2.10 2.99 3.82 4.59 5.32 6.00 6.64 7.24 7.81 8.34 8.85 9.78 10.60 11.21 11.84 12.42 12.88
19 1.18 2.22 3.17 4.04 4.86 5.63 6.35 7.03 7.67 8.28 8.85 9.39 10.38 11.26 11.93 12.60 13.22 13.73 14.14
20 1.25 2.34 3.34 4.26 5.09 5.94 6.70 7.42 8.10 8.74 9.35 9.92 10.97 11.86 12.62 13.34 13.99 14.54 14.99

21 1.31 2.46 3.51 4.48 5.39 6.24 7.04 7.80 8.51 9.19 9.83 10.43 11.54 12.47 13.28 14.05 14.73 15.31 15.80
& Moisture
Corrosion
Resistant

22 1.37 2.57 3.67 4.69 5.65 6.54 7.38 8.17 8.92 9.63 10.30 10.93 12.09 13.06 13.92 14.73 15.44 16.05 16.57
23 1.44 2.69 3.84 4.90 5.90 6.83 7.71 8.54 9.32 10.06 10.76 11.42 12.63 13.63 14.54 15.39 16.12 16.76 17.30 17.78
24 1.50 2.81 4.00 5.11 6.15 7.12 8.04 8.90 9.72 10.49 11.21 11.90 13.16 14.18 15.15 16.03 16.77 17.44 18.00 18.40
25 1.56 2.92 4.17 5.32 6.36 7.41 8.36 9.26 10.10 10.90 11.65 12.37 13.58 14.72 15.75 16.65 17.40 18.09 18.67 19.09

30 1.86 3.48 4.96 6.33 7.60 8.79 9.86 10.95 11.85 12.76 13.74 14.56 15.98 17.28 18.40 19.40 20.22 20.92 21.32 22.00
35 2.16 4.03 5.72 7.29 8.73 10.08 11.29 12.53 13.59 14.67 15.64 16.54 18.09 19.49 20.67 21.73 22.55 23.20 23.78
Maintenance
Reduced

40 2.45 4.56 6.46 8.21 9.82 11.31 12.65 14.00 15.16 16.33 17.37 18.34 19.95 21.42 22.62 23.68 24.42 25.08
45 2.74 5.08 7.18 9.09 10.85 12.48 13.93 15.38 16.62 17.86 18.92 19.98 21.60 23.12 24.29 25.28 25.90
50 3.02 5.58 7.87 9.95 11.80 13.59 15.13 16.67 17.98 19.28 20.37 21.47 23.12 24.59 25.69

55 3.30 6.08 8.54 10.77 12.72 14.65 16.26 17.89 19.23 20.59 21.70 22.82 24.45 25.82
60 3.57 6.56 9.20 11.57 13.60 15.66 17.34 19.03 20.41 21.80 22.92 24.04
Type A: Manual (4-10 drops/ Type B: Rapid Drip (20 drops/min)
Attachments

Lubrication Type C: Continuous with Oil Slinger or Oil Stream

min) or Oil Bath or Oil Bath or Slinger

#2060 Double Pitch Roller Chain - Metric Units (Kilowatts)

# of teeth
in small
Revolutions Per Minute – Small Sprocket
sprocket
Application

25 50 75 100 125 150 175 200 225 250 275 300 350 400 450 500 550 600 650 700
Specific

6 0.22
7 0.28 0.49 0.66 0.79
8 0.34 0.60 0.82 1.01 1.17 1.30 1.42
9 0.39 0.70 0.98 1.22 1.42 1.61 1.77 1.92 2.04
10 0.44 0.81 1.13 1.42 1.67 1.90 2.11 2.30 2.47 2.62 2.75 2.87
Horsepower

11 0.49 0.91 1.28 1.61 1.91 2.18 2.44 2.67 2.88 3.07 3.24 3.41 3.68
Tables

12 0.54 1.01 1.42 1.80 2.14 2.46 2.75 3.02 3.27 3.50 3.71 3.91 4.26 4.54
13 0.59 1.10 1.56 1.98 2.36 2.72 3.06 3.36 3.65 3.92 4.17 4.40 4.81 5.16 5.41
14 0.64 1.19 1.70 2.16 2.59 2.98 3.36 3.70 4.02 4.33 4.61 4.87 5.34 5.75 6.04 6.35
15 0.69 1.29 1.83 2.33 2.80 3.24 3.64 4.02 4.38 4.71 5.03 5.32 5.85 6.32 6.65 7.01

16 0.74 1.38 1.97 2.51 3.01 3.48 3.92 4.34 4.73 5.09 5.44 5.76 6.35 6.87 7.24 7.64 7.98
Components

17 0.79 1.48 2.10 2.68 3.22 3.73 4.20 4.65 5.06 5.47 5.84 6.19 6.83 7.40 7.81 8.25 8.64 8.94
Chain

18 0.84 1.57 2.23 2.85 3.42 3.97 4.47 4.95 5.40 5.82 6.22 6.60 7.29 7.90 8.36 8.83 9.26 9.60
19 0.88 1.66 2.36 3.01 3.62 4.20 4.74 5.24 5.72 6.17 6.60 7.00 7.74 8.40 8.90 9.40 9.86 10.24 10.54
20 0.93 1.74 2.49 3.18 3.80 4.43 5.00 5.53 6.04 6.52 6.97 7.40 8.18 8.84 9.41 9.95 10.43 10.84 11.18

21 0.98 1.83 2.62 3.34 4.02 4.65 5.25 5.82 6.35 6.85 7.33 7.78 8.61 9.30 9.90 10.48 10.98 11.42 11.78
Troubleshooting

22 1.02 1.92 2.74 3.50 4.21 4.88 5.50 6.09 6.65 7.18 7.68 8.15 9.02 9.74 10.38 10.98 11.51 11.97 12.36
23 1.07 2.01 2.86 3.65 4.40 5.09 5.75 6.37 6.95 7.50 8.02 8.52 9.42 10.16 10.84 11.48 12.02 12.50 12.90 13.26
Tools,

24 1.12 2.10 2.98 3.81 4.59 5.31 6.00 6.64 7.25 7.82 8.36 8.87 9.81 10.57 11.30 11.95 12.51 13.01 13.42 13.72
25 1.16 2.18 3.11 3.97 4.74 5.53 6.23 6.91 7.53 8.13 8.69 9.22 10.13 10.98 11.74 12.42 12.98 13.49 13.92 14.24

30 1.39 2.60 3.70 4.72 5.67 6.55 7.35 8.17 8.84 9.52 10.25 10.86 11.92 12.89 13.72 14.47 15.08 15.60 15.90 16.41
35 1.61 3.01 4.27 5.44 6.51 7.52 8.42 9.34 10.13 10.94 11.66 12.33 13.49 14.53 15.41 16.20 16.82 17.30 17.73
40 1.83 3.40 4.82 6.12 7.32 8.43 9.43 10.44 11.30 12.18 12.95 13.68 14.88 15.97 16.87 17.66 18.21 18.70
Information

45 2.04 3.79 5.35 6.78 8.09 9.31 10.39 11.47 12.39 13.32 14.11 14.90 16.11 17.24 18.11 18.85 19.31
Ordering

50 2.25 4.16 5.87 7.42 8.80 10.13 11.28 12.43 13.41 14.38 15.19 16.01 17.24 18.34 19.16 0.00

55 2.46 4.53 6.37 8.03 9.49 10.92 12.13 13.34 14.34 15.35 16.18 17.02 18.23 19.25
60 2.66 4.89 6.86 8.63 10.14 11.68 12.93 14.19 15.22 16.26 17.09 17.93
Type A: Manual (4-10 drops/ Type B: Rapid Drip (20 drops/min)
Lubrication Type C: Continuous with Oil Slinger or Oil Stream
min) or Oil Bath or Oil Bath or Slinger
Conditions
Terms and

78 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Double Pitch Series Horsepower Tables
#2080 Double Pitch Roller Chain - Imperial Units (Horsepower)
# of teeth Revolutions Per Minute – Small Sprocket

Difference
Diamond
in small
sprocket 10 20 30 40 50 60 70 80 90 100 125 150 175 200 225 250 300 350 400 450
6 0.32 0.56 0.77
7 0.39 0.71 0.98 1.23 1.44 1.64 1.81
8 0.46 0.84 1.19 1.50 1.79 2.05 2.29 2.51 2.71 2.90
9 0.53 0.98 1.39 1.77 2.12 2.45 2.75 3.04 3.30 3.55 4.11 4.57
10 0.59 1.11 1.59 2.03 2.44 2.83 3.20 3.54 3.87 4.18 4.88 5.48 6.01

Selection
Guide
11 0.66 1.24 1.78 2.28 2.76 3.20 3.63 4.03 4.41 4.78 5.62 6.36 7.02 7.56 8.07
12 0.72 1.37 1.97 2.53 3.06 3.57 4.05 4.51 4.94 5.36 6.33 7.21 7.95 8.66 9.27 9.82
13 0.79 1.50 2.16 2.78 3.36 3.92 4.46 4.97 5.46 5.93 7.03 8.02 8.89 9.75 10.42 11.08
14 0.85 1.62 2.34 3.02 3.66 4.28 4.86 5.43 5.97 6.49 7.71 8.82 9.83 10.76 11.53 12.29 13.60
15 0.92 1.75 2.52 3.26 3.95 4.62 5.26 5.87 6.46 7.03 8.37 9.59 10.71 11.74 12.60 13.46 14.94

16 0.98 1.87 2.70 3.49 4.24 4.96 5.65 6.31 6.95 7.56 9.01 10.34 11.57 12.69 13.63 14.59 16.24 17.65

Carbon
Steel
17 1.05 1.99 2.88 3.72 4.52 5.29 6.03 6.74 7.43 8.09 9.64 11.08 12.36 13.62 14.63 15.69 17.50 19.04
18 1.11 2.11 3.06 3.95 4.80 5.62 6.41 7.17 7.90 8.60 10.26 11.80 13.21 14.52 15.60 16.76 18.72 20.38 21.77
19 1.17 2.23 3.23 4.18 5.08 5.95 6.78 7.58 8.36 9.11 10.87 12.50 14.01 15.40 16.55 17.80 19.90 21.67 23.18
20 1.23 2.35 3.40 4.40 5.36 6.27 7.15 8.00 8.81 9.60 11.47 13.19 14.78 16.26 17.48 18.81 21.04 22.91 24.52

21 1.30 2.47 3.58 4.63 5.63 6.59 7.51 8.40 9.26 10.09 12.05 13.87 15.54 17.10 18.39 19.79 22.14 24.11 25.80

& Moisture
Corrosion

Resistant
22 1.36 2.59 3.75 4.85 5.90 6.90 7.87 8.81 9.67 10.58 12.63 14.53 16.29 17.92 19.28 20.74 23.20 25.27 27.03
23 1.42 2.71 3.92 5.07 6.16 7.21 8.19 9.20 10.10 11.05 13.20 15.18 17.02 18.72 20.15 21.66 24.23 26.40 28.22
24 1.48 2.82 4.05 5.28 6.43 7.52 8.54 9.59 10.53 11.52 13.76 15.83 17.74 19.51 21.01 22.55 25.23 27.50 29.38 30.98
25 1.54 2.94 4.20 5.50 6.69 7.83 8.89 9.94 10.95 11.99 14.31 16.46 18.44 20.28 21.86 23.42 26.20 28.57 30.52 32.16

30 1.84 3.51 5.02 6.55 7.97 9.32 10.62 11.74 12.97 14.23 16.96 19.47 21.78 23.92 25.73 27.52 30.70 33.56 35.52 37.26
35 2.14 4.07 5.82 7.58 9.20 10.75 12.23 13.48 14.92 16.35 19.44 22.27 24.86 27.24 29.24 31.21 34.65 37.57 39.66

Maintenance
Reduced
40 2.44 4.62 6.60 8.57 10.39 12.09 13.79 15.17 16.80 18.36 21.78 24.88 27.71 30.28 32.42 34.52 38.09 40.96 43.07
45 2.73 5.16 7.37 9.54 11.55 13.46 15.25 16.82 18.61 20.29 23.99 27.33 30.35 33.07 35.30 37.50 41.10 43.81
50 3.01 5.69 8.13 10.49 12.68 14.76 16.69 18.43 20.35 22.12 26.09 29.64 32.81 35.65 37.92 40.16 43.70

55 3.30 6.21 8.90 11.41 13.78 16.01 18.08 20.00 22.02 23.88 28.08 31.80 35.10 38.01 40.30 42.52
60 3.58 6.73 9.62 12.32 14.85 17.24 19.43 21.53 23.65 25.57 29.97 33.83 37.22 40.14
Type B: Rapid Drip (20 drops/min)

Attachments
Lubrication Type A: Manual (4-10 drops/min) or Oil Bath Type C: Continuous with Oil Slinger or Oil Stream
or Oil Bath or Slinger

#2080 Double Pitch Roller Chain - Metric Units (Kilowatts)

# of teeth
in small
Revolutions Per Minute – Small Sprocket
sprocket

Application
10 20 30 40 50 60 70 80 90 100 125 150 175 200 225 250 300 350 400 450

Specific
6 0.24 0.42 0.57
7 0.29 0.53 0.73 0.92 1.07 1.22 1.35
8 0.34 0.63 0.89 1.12 1.33 1.53 1.71 1.87 2.02 2.16
9 0.40 0.73 1.04 1.32 1.58 1.83 2.05 2.27 2.46 2.65 3.06 3.41
10 0.44 0.83 1.19 1.51 1.82 2.11 2.39 2.64 2.89 3.12 3.64 4.09 4.48

Horsepower
11 0.49 0.92 1.33 1.70 2.06 2.39 2.71 3.01 3.29 3.56 4.19 4.74 5.23 5.64 6.02

Tables
12 0.54 1.02 1.47 1.89 2.28 2.66 3.02 3.36 3.68 4.00 4.72 5.38 5.93 6.46 6.91 7.32
13 0.59 1.12 1.61 2.07 2.51 2.92 3.33 3.71 4.07 4.42 5.24 5.98 6.63 7.27 7.77 8.26
14 0.63 1.21 1.74 2.25 2.73 3.19 3.62 4.05 4.45 4.84 5.75 6.58 7.33 8.02 8.60 9.16 10.14
15 0.69 1.30 1.88 2.43 2.95 3.45 3.92 4.38 4.82 5.24 6.24 7.15 7.99 8.75 9.40 10.04 11.14

16 0.73 1.39 2.01 2.60 3.16 3.70 4.21 4.71 5.18 5.64 6.72 7.71 8.63 9.46 10.16 10.88 12.11 13.16

Components
17 0.78 1.48 2.15 2.77 3.37 3.94 4.50 5.03 5.54 6.03 7.19 8.26 9.22 10.16 10.91 11.70 13.05 14.20

Chain
18 0.83 1.57 2.28 2.95 3.58 4.19 4.78 5.35 5.89 6.41 7.65 8.80 9.85 10.83 11.63 12.50 13.96 15.20 16.23
19 0.87 1.66 2.41 3.12 3.79 4.44 5.06 5.65 6.23 6.79 8.11 9.32 10.45 11.48 12.34 13.27 14.84 16.16 17.29
20 0.92 1.75 2.54 3.28 4.00 4.68 5.33 5.97 6.57 7.16 8.55 9.84 11.02 12.13 13.03 14.03 15.69 17.08 18.28

21 0.97 1.84 2.67 3.45 4.20 4.91 5.60 6.26 6.91 7.52 8.99 10.34 11.59 12.75 13.71 14.76 16.51 17.98 19.24
Troubleshooting

22 1.01 1.93 2.80 3.62 4.40 5.15 5.87 6.57 7.21 7.89 9.42 10.84 12.15 13.36 14.38 15.47 17.30 18.84 20.16
23 1.06 2.02 2.92 3.78 4.59 5.38 6.11 6.86 7.53 8.24 9.84 11.32 12.69 13.96 15.03 16.15 18.07 19.69 21.04
Tools,

24 1.10 2.10 3.02 3.94 4.79 5.61 6.37 7.15 7.85 8.59 10.26 11.80 13.23 14.55 15.67 16.82 18.81 20.51 21.91 23.10
25 1.15 2.19 3.13 4.10 4.99 5.84 6.63 7.41 8.17 8.94 10.67 12.27 13.75 15.12 16.30 17.46 19.54 21.30 22.76 23.98

30 1.37 2.62 3.74 4.88 5.94 6.95 7.92 8.75 9.67 10.61 12.65 14.52 16.24 17.84 19.19 20.52 22.89 25.03 26.49 27.78
35 1.60 3.03 4.34 5.65 6.86 8.02 9.12 10.05 11.13 12.19 14.50 16.61 18.54 20.31 21.80 23.27 25.84 28.02 29.57
40 1.82 3.45 4.92 6.39 7.75 9.02 10.28 11.31 12.53 13.69 16.24 18.55 20.66 22.58 24.18 25.74 28.40 30.54 32.12
Information

45 2.04 3.85 5.50 7.11 8.61 10.04 11.37 12.54 13.88 15.13 17.89 20.38 22.63 24.66 26.32 27.96 30.65 32.67
Ordering

50 2.24 4.24 6.06 7.82 9.46 11.01 12.45 13.74 15.17 16.49 19.46 22.10 24.47 26.58 28.28 29.95 32.59

55 2.46 4.63 6.64 8.51 10.28 11.94 13.48 14.91 16.42 17.81 20.94 23.71 26.17 28.34 30.05 31.71
60 2.67 5.02 7.17 9.19 11.07 12.86 14.49 16.05 17.64 19.07 22.35 25.23 27.75 29.93
Type B: Rapid Drip (20 drops/min)
Lubrication Type A: Manual (4-10 drops/min) or Oil Bath Type C: Continuous with Oil Slinger or Oil Stream
or Oil Bath or Slinger
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 79

 Diamond
Chain

RING LEADER O-Ring (XLO) Series Horsepower Tables

#50 O-Ring Chain - Imperial Units (Horsepower)
Revolutions Per Minute – Small Sprocket
Difference
Diamond

# of teeth in small
sprocket
50 100 200 300 400 500 700 900 1,200 1,400 1,800 2,000
9 0.36 0.67 1.26 1.81 2.35 2.87 3.89 4.88 6.32 6.02 4.13 3.52
10 0.41 0.76 1.41 2.03 2.63 3.22 4.36 5.46 7.08 7.05 4.83 4.13
11 0.45 0.84 1.56 2.25 2.92 3.57 4.83 6.06 7.85 8.13 5.58 4.76
12 0.49 0.92 1.72 2.47 3.21 3.92 5.31 6.65 8.62 9.26 6.35 5.42
Selection
Guide

13 0.54 1.00 1.87 2.70 3.50 4.27 5.78 7.25 9.40 10.44 7.16 6.12

14 0.58 1.09 2.03 2.92 3.79 4.63 6.27 7.86 10.18 11.67 8.01 6.84
15 0.63 1.17 2.19 3.15 4.08 4.99 6.75 8.47 10.97 12.60 8.88 7.58
16 0.67 1.26 2.34 3.38 4.37 5.35 7.24 9.08 11.76 13.51 9.78 8.35
17 0.72 1.34 2.50 3.61 4.67 5.71 7.73 9.69 12.55 14.42 10.71
18 0.76 1.43 2.66 3.83 4.97 6.07 8.22 10.31 13.35 15.34 11.67
Carbon
Steel

19 0.81 1.51 2.82 4.07 5.27 6.44 8.72 10.93 14.16 16.26 12.66
20 0.86 1.60 2.98 4.30 5.57 6.80 9.21 11.55 14.96 17.19 13.67
21 0.90 1.69 3.14 4.53 5.87 7.17 9.71 12.17 15.77 18.12 14.71
22 0.95 1.77 3.31 4.76 6.17 7.54 10.21 12.80 16.58 19.05
23 1.00 1.86 3.47 5.00 6.47 7.91 10.71 13.43 17.40 19.99
& Moisture
Corrosion
Resistant

24 1.04 1.95 3.63 5.23 6.78 8.29 11.22 14.06 18.22 20.93
25 1.09 2.03 3.80 5.47 7.08 8.66 11.72 14.70 19.04 21.87
26 1.14 2.12 3.96 5.70 7.39 9.03 12.23 15.33 19.86 22.82
28 1.23 2.30 4.29 6.18 8.01 9.79 13.25 16.61 21.52
30 1.33 2.48 4.62 6.66 8.63 10.54 14.27 17.90 23.18
Maintenance
Reduced

32 1.42 2.66 4.96 7.14 9.25 11.30 15.30 19.19 24.86

35 1.57 2.93 5.46 7.86 10.19 12.45 16.86 21.14
40 1.81 3.38 6.31 9.08 11.77 14.39 19.47 24.42
45 2.06 3.84 7.16 10.32 13.36 16.34 22.12
Attachments

#50 O-Ring Chain - Metric Units (Kilowatts)

# of teeth in small Revolutions Per Minute – Small Sprocket
Application

sprocket
Specific

50 100 200 300 400 500 700 900 1,200 1,400 1,800 2,000
9 0.27 0.50 0.94 1.35 1.75 2.14 2.90 3.64 4.71 4.49 3.08 2.62
10 0.31 0.57 1.05 1.51 1.96 2.40 3.25 4.07 5.28 5.26 3.60 3.08
11 0.34 0.63 1.16 1.68 2.18 2.66 3.60 4.52 5.85 6.06 4.16 3.55
12 0.37 0.69 1.28 1.84 2.39 2.92 3.96 4.96 6.43 6.91 4.74 4.04
Horsepower

13 0.40 0.75 1.39 2.01 2.61 3.18 4.31 5.41 7.01 7.79 5.34 4.56
Tables

14 0.43 0.81 1.51 2.18 2.83 3.45 4.68 5.86 7.59 8.70 5.97 5.10
15 0.47 0.87 1.63 2.35 3.04 3.72 5.03 6.32 8.18 9.40 6.62 5.65
16 0.50 0.94 1.74 2.52 3.26 3.99 5.40 6.77 8.77 10.07 7.29 6.23
17 0.54 1.00 1.86 2.69 3.48 4.26 5.76 7.23 9.36 10.75 7.99
18 0.57 1.07 1.98 2.86 3.71 4.53 6.13 7.69 9.96 11.44 8.70
Components
Chain

19 0.60 1.13 2.10 3.03 3.93 4.80 6.50 8.15 10.56 12.13 9.44
20 0.64 1.19 2.22 3.21 4.15 5.07 6.87 8.61 11.16 12.82 10.19
21 0.67 1.26 2.34 3.38 4.38 5.35 7.24 9.08 11.76 13.51 10.97
22 0.71 1.32 2.47 3.55 4.60 5.62 7.61 9.54 12.36 14.21
23 0.75 1.39 2.59 3.73 4.82 5.90 7.99 10.01 12.98 14.91
Troubleshooting

24 0.78 1.45 2.71 3.90 5.06 6.18 8.37 10.48 13.59 15.61
Tools,

25 0.81 1.51 2.83 4.08 5.28 6.46 8.74 10.96 14.20 16.31
26 0.85 1.58 2.95 4.25 5.51 6.73 9.12 11.43 14.81 17.02
28 0.92 1.72 3.20 4.61 5.97 7.30 9.88 12.39 16.05
30 0.99 1.85 3.45 4.97 6.44 7.86 10.64 13.35 17.29

32 1.06 1.98 3.70 5.32 6.90 8.43 11.41 14.31 18.54

Information
Ordering

35 1.17 2.18 4.07 5.86 7.60 9.28 12.57 15.76

40 1.35 2.52 4.71 6.77 8.78 10.73 14.52 18.21
45 1.54 2.86 5.34 7.70 9.96 12.18 16.49
Conditions
Terms and

80 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
RING LEADER O-Ring (XLO) Series Horsepower Tables
#60 O-Ring Chain - Imperial Units (Horsepower)
Revolutions Per Minute – Small Sprocket

Difference
Diamond
# of teeth in
small sprocket
50 100 150 200 300 400 500 600 700 900 1,000 1,200 1,400 1,500
9 0.62 1.16 1.67 2.16 3.12 4.04 4.94 5.82 6.68 8.38 9.21 8.77 6.96 6.28
10 0.70 1.30 1.87 2.43 3.49 4.53 5.53 6.52 7.49 9.39 10.32 10.27 8.15 7.35
11 0.77 1.44 2.07 2.69 3.87 5.02 6.13 7.23 8.30 10.41 11.44 11.85 9.41 8.48
12 0.85 1.58 2.28 2.95 4.25 5.51 6.74 7.94 9.12 11.43 12.57 13.51 10.72 9.66

Selection
Guide
13 0.92 1.73 2.49 3.22 4.64 6.01 7.34 8.65 9.94 12.46 13.70 15.23 12.08 10.90

14 1.00 1.87 2.69 3.49 5.02 6.51 7.96 9.37 10.77 13.50 14.85 17.02 13.51 12.18
15 1.08 2.01 2.90 3.76 5.41 7.01 8.57 10.10 11.60 14.55 15.99 18.85 14.98 13.51
16 1.16 2.16 3.11 4.03 5.80 7.52 9.19 10.83 12.44 15.60 17.15 20.21 16.50 14.88
17 1.24 2.31 3.32 4.30 6.20 8.03 9.81 11.56 13.28 16.65 18.31 21.58 18.07
18 1.31 2.45 3.53 4.58 6.59 8.54 10.44 12.30 14.13 17.71 19.48 22.95 19.69

Carbon
Steel
19 1.39 2.60 3.74 4.85 6.99 9.05 11.06 13.04 14.98 18.78 20.65 24.33 21.35
20 1.47 2.75 3.96 5.13 7.38 9.57 11.69 13.78 15.83 19.85 21.82 25.71 23.06
21 1.55 2.90 4.17 5.40 7.78 10.08 12.33 14.53 16.69 20.92 23.00 27.11
22 1.63 3.05 4.39 5.68 8.19 10.60 12.96 15.27 17.55 22.00 24.19 28.50
23 1.71 3.19 4.60 5.96 8.59 11.13 13.60 16.03 18.41 23.08 25.38 29.90

& Moisture
Corrosion

Resistant
24 1.79 3.35 4.82 6.24 8.99 11.65 14.24 16.78 19.28 24.17 26.57 31.31
25 1.87 3.50 5.04 6.52 9.40 12.17 14.88 17.54 20.14 25.26 27.77
26 1.95 3.65 5.25 6.81 9.80 12.70 15.53 18.29 21.02 26.35 28.97
28 2.12 3.95 5.69 7.37 10.62 13.76 16.82 19.82 22.77 28.55 31.39
30 2.28 4.26 6.13 7.94 11.44 14.82 18.12 21.35 24.53 30.75

Maintenance
Reduced
32 2.45 4.56 6.57 8.52 12.27 15.89 19.43 22.89 26.30 32.97
35 2.69 5.03 7.24 9.38 13.50 17.50 21.40 25.20 29.00
40 3.11 5.81 8.37 10.80 15.60 20.20 24.70 29.10 33.50
45 3.53 6.60 9.50 12.30 17.70 23.00 28.10 33.10

Attachments
#60 O-Ring Chain - Metric Units (Kilowatts)
# of teeth in Revolutions Per Minute – Small Sprocket

Application
small sprocket

Specific
50 100 150 200 300 400 500 600 700 900 1,000 1,200 1,400 1,500
9 0.46 0.87 1.25 1.61 2.33 3.01 3.68 4.34 4.98 6.25 6.87 6.54 5.19 4.68
10 0.52 0.97 1.39 1.81 2.60 3.38 4.12 4.86 5.59 7.00 7.70 7.66 6.08 5.48
11 0.57 1.07 1.54 2.01 2.89 3.74 4.57 5.39 6.19 7.76 8.53 8.84 7.02 6.32
12 0.63 1.18 1.70 2.20 3.17 4.11 5.03 5.92 6.80 8.52 9.37 10.07 7.99 7.20

Horsepower
13 0.69 1.29 1.86 2.40 3.46 4.48 5.47 6.45 7.41 9.29 10.22 11.36 9.01 8.13

Tables
14 0.75 1.39 2.01 2.60 3.74 4.85 5.94 6.99 8.03 10.07 11.07 12.69 10.07 9.08
15 0.81 1.50 2.16 2.80 4.03 5.23 6.39 7.53 8.65 10.85 11.92 14.06 11.17 10.07
16 0.87 1.61 2.32 3.01 4.33 5.61 6.85 8.08 9.28 11.63 12.79 15.07 12.30 11.10
17 0.92 1.72 2.48 3.21 4.62 5.99 7.32 8.62 9.90 12.42 13.65 16.09 13.47
18 0.98 1.83 2.63 3.42 4.91 6.37 7.79 9.17 10.54 13.21 14.53 17.11 14.68

Components
Chain
19 1.04 1.94 2.79 3.62 5.21 6.75 8.25 9.72 11.17 14.00 15.40 18.14 15.92
20 1.10 2.05 2.95 3.83 5.50 7.14 8.72 10.28 11.80 14.80 16.27 19.17 17.20
21 1.16 2.16 3.11 4.03 5.80 7.52 9.19 10.84 12.45 15.60 17.15 20.22
22 1.22 2.27 3.27 4.24 6.11 7.90 9.66 11.39 13.09 16.41 18.04 21.25
23 1.28 2.38 3.43 4.44 6.41 8.30 10.14 11.95 13.73 17.21 18.93 22.30
Troubleshooting

24 1.33 2.50 3.59 4.65 6.70 8.69 10.62 12.51 14.38 18.02 19.81 23.35
Tools,

25 1.39 2.61 3.76 4.86 7.01 9.08 11.10 13.08 15.02 18.84 20.71
26 1.45 2.72 3.91 5.08 7.31 9.47 11.58 13.64 15.67 19.65 21.60
28 1.58 2.95 4.24 5.50 7.92 10.26 12.54 14.78 16.98 21.29 23.41
30 1.70 3.18 4.57 5.92 8.53 11.05 13.51 15.92 18.29 22.93

32 1.83 3.40 4.90 6.35 9.15 11.85 14.49 17.07 19.61 24.59
Information
Ordering

35 2.01 3.75 5.40 6.99 10.07 13.05 15.96 18.79 21.63

40 2.32 4.33 6.24 8.05 11.63 15.06 18.42 21.70 24.98
45 2.63 4.92 7.08 9.17 13.20 17.15 20.95 24.68
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 81

 Diamond
Chain

RING LEADER O-Ring (XLO) Series Horsepower Tables

#80 O-Ring Chain - Imperial Units (Horsepower)
Revolutions Per Minute – Small Sprocket
Difference
Diamond

# of teeth in small
sprocket
50 100 150 200 300 400 500 700 900 1,000 1,100
9 1.45 2.71 3.90 5.05 7.28 9.43 11.53 15.60 17.00 14.51 12.58
10 1.63 3.03 4.37 5.66 8.16 10.57 12.92 17.48 19.91 17.00 14.74
11 1.80 3.36 4.84 6.28 9.04 11.71 14.32 19.38 22.97 19.61 17.00
12 1.98 3.69 5.32 6.89 9.93 12.87 15.73 21.29 26.17 22.35 19.37
Selection
Guide

13 2.16 4.03 5.80 7.52 10.83 14.03 17.15 23.21 29.10 25.20 21.84

14 2.34 4.36 6.29 8.14 11.73 15.20 18.58 25.15 31.53 28.16 24.41
15 2.52 4.70 6.77 8.77 12.64 16.37 20.01 27.09 33.97 31.23 27.07
16 2.70 5.04 7.26 9.41 13.55 17.55 21.46 29.05 36.42 34.41
17 2.88 5.38 7.75 10.04 14.47 18.74 22.91 31.01 38.88 37.68
18 3.07 5.72 8.25 10.68 15.39 19.93 24.37 32.99 41.36 41.05
Carbon
Steel

19 3.25 6.07 8.74 11.33 16.31 21.13 25.83 34.97 43.85

20 3.44 6.41 9.24 11.97 17.24 22.34 27.31 36.96 46.34
21 3.62 6.76 9.74 12.62 18.17 23.55 28.78 38.96
22 3.81 7.11 10.24 13.27 19.11 24.76 30.27 40.97
23 4.00 7.46 10.75 13.92 20.05 25.98 31.75 42.98
& Moisture
Corrosion
Resistant

24 4.19 7.81 11.25 14.58 20.99 27.20 33.25 45.01

25 4.37 8.16 11.76 15.23 21.94 28.42 34.75 47.04
26 4.56 8.52 12.27 15.89 22.89 29.65 36.25
28 4.94 9.23 13.29 17.22 24.80 32.13 39.27
30 5.33 9.94 14.32 18.55 26.72 34.61 42.31
Maintenance
Reduced

32 5.71 10.66 15.35 19.89 28.64 37.11 45.36

35 6.29 11.74 16.91 21.91 31.55 40.88 49.97
40 7.27 13.56 19.53 25.31 36.45 47.22
45 8.25 15.40 22.18 28.74 41.39 53.63
Attachments

#80 O-Ring Chain - Metric Units (Kilowatts)

# of teeth in small Revolutions Per Minute – Small Sprocket
Application

sprocket
Specific

50 100 150 200 300 400 500 700 900 1,000 1,100
9 1.08 2.02 2.91 3.77 5.43 7.03 8.60 11.63 12.68 10.82 9.38
10 1.22 2.26 3.26 4.22 6.08 7.88 9.63 13.03 14.85 12.68 10.99
11 1.34 2.51 3.61 4.68 6.74 8.73 10.68 14.45 17.13 14.62 12.68
12 1.48 2.75 3.97 5.14 7.40 9.60 11.73 15.88 19.51 16.67 14.44
Horsepower

13 1.61 3.01 4.33 5.61 8.08 10.46 12.79 17.31 21.70 18.79 16.29
Tables

14 1.74 3.25 4.69 6.07 8.75 11.33 13.86 18.75 23.51 21.00 18.20
15 1.88 3.50 5.05 6.54 9.43 12.21 14.92 20.20 25.33 23.29 20.19
16 2.01 3.76 5.41 7.02 10.10 13.09 16.00 21.66 27.16 25.66
17 2.15 4.01 5.78 7.49 10.79 13.97 17.08 23.12 28.99 28.10
18 2.29 4.27 6.15 7.96 11.48 14.86 18.17 24.60 30.84 30.61
Components
Chain

19 2.42 4.53 6.52 8.45 12.16 15.76 19.26 26.08 32.70

20 2.57 4.78 6.89 8.93 12.86 16.66 20.37 27.56 34.56
21 2.70 5.04 7.26 9.41 13.55 17.56 21.46 29.05
22 2.84 5.30 7.64 9.90 14.25 18.46 22.57 30.55
23 2.98 5.56 8.02 10.38 14.95 19.37 23.68 32.05
Troubleshooting

24 3.12 5.82 8.39 10.87 15.65 20.28 24.79 33.56

Tools,

25 3.26 6.08 8.77 11.36 16.36 21.19 25.91 35.08

26 3.40 6.35 9.15 11.85 17.07 22.11 27.03
28 3.68 6.88 9.91 12.84 18.49 23.96 29.28
30 3.97 7.41 10.68 13.83 19.93 25.81 31.55

32 4.26 7.95 11.45 14.83 21.36 27.67 33.82

Information
Ordering

35 4.69 8.75 12.61 16.34 23.53 30.48 37.26

40 5.42 10.11 14.56 18.87 27.18 35.21
45 6.15 11.48 16.54 21.43 30.86 39.99
Conditions
Terms and

82 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
RING LEADER O-Ring (XLO) Series Horsepower Tables
#100 O-Ring Chain - Imperial Units (Horsepower)
Revolutions Per Minute – Small Sprocket

Difference
Diamond
# of teeth in small
sprocket
25 50 100 150 200 300 400 500 600 700
9 1.49 2.78 5.19 7.47 9.68 13.94 18.06 22.08 26.02 29.63
10 1.67 3.11 5.81 8.37 10.85 15.62 20.24 24.74 29.15 33.49
11 1.85 3.45 6.44 9.28 12.02 17.32 22.43 27.42 32.31 37.12
12 2.03 3.79 7.08 10.19 13.21 19.02 24.64 30.12 35.49 40.78

Selection
Guide
13 2.22 4.13 7.72 11.11 14.40 20.74 26.87 32.84 38.70 44.46

14 2.40 4.48 8.36 12.04 15.60 22.47 29.11 35.58 41.92 48.16
15 2.59 4.83 9.01 12.97 16.80 24.20 31.36 38.33 45.17 51.89
16 2.77 5.17 9.66 13.91 18.02 25.95 33.62 41.10 48.43 55.64
17 2.96 5.52 10.31 14.85 19.24 27.71 35.90 43.88 51.70 59.40
18 3.15 5.88 10.96 15.79 20.46 29.47 38.18 46.67 55.00

Carbon
Steel
19 3.34 6.23 11.62 16.74 21.69 31.24 40.48 49.48 58.30
20 3.53 6.58 12.29 17.70 22.93 33.02 42.78 52.30 61.63
21 3.72 6.94 12.95 18.65 24.17 34.81 45.10 55.13
22 3.91 7.30 13.62 19.62 25.41 36.60 47.42 57.97
23 4.10 7.66 14.29 20.58 26.66 38.40 49.75 60.82

& Moisture
Corrosion

Resistant
24 4.30 8.02 14.96 21.55 27.92 40.21 52.09 63.68
25 4.49 8.38 15.63 22.52 29.18 42.02 54.44
26 4.68 8.74 16.31 23.49 30.44 43.84 56.80
28 5.07 9.47 17.67 25.45 32.97 47.50 61.53
30 5.47 10.20 19.04 27.42 35.52 51.17 66.29

Maintenance
Reduced
32 5.86 10.94 20.41 29.40 38.09 54.86
35 6.46 12.05 22.49 32.39 41.96 60.44
40 7.46 13.92 25.97 37.41 48.47 69.81
45 8.47 15.81 29.50 42.49 55.04

Attachments
#100 O-Ring Chain - Metric Units (Kilowatts)
# of teeth in small Revolutions Per Minute – Small Sprocket

Application
sprocket

Specific
25 50 100 150 200 300 400 500 600 700
9 1.11 2.07 3.87 5.57 7.22 10.40 13.47 16.47 19.40 22.10
10 1.25 2.32 4.33 6.24 8.09 11.65 15.09 18.45 21.74 24.97
11 1.38 2.57 4.80 6.92 8.96 12.92 16.73 20.45 24.09 27.68
12 1.51 2.83 5.28 7.60 9.85 14.18 18.37 22.46 26.46 30.41

Horsepower
13 1.66 3.08 5.76 8.28 10.74 15.47 20.04 24.49 28.86 33.15

Tables
14 1.79 3.34 6.23 8.98 11.63 16.76 21.71 26.53 31.26 35.91
15 1.93 3.60 6.72 9.67 12.53 18.05 23.39 28.58 33.68 38.69
16 2.07 3.86 7.20 10.37 13.44 19.35 25.07 30.65 36.11 41.49
17 2.21 4.12 7.69 11.07 14.35 20.66 26.77 32.72 38.55 44.29
18 2.35 4.38 8.17 11.77 15.26 21.98 28.47 34.80 41.01

Components
Chain
19 2.49 4.65 8.67 12.48 16.17 23.30 30.19 36.90 43.47
20 2.63 4.91 9.16 13.20 17.10 24.62 31.90 39.00 45.96
21 2.77 5.18 9.66 13.91 18.02 25.96 33.63 41.11
22 2.92 5.44 10.16 14.63 18.95 27.29 35.36 43.23
23 3.06 5.71 10.66 15.35 19.88 28.63 37.10 45.35
Troubleshooting

24 3.21 5.98 11.16 16.07 20.82 29.98 38.84 47.49

Tools,

25 3.35 6.25 11.66 16.79 21.76 31.33 40.60

26 3.49 6.52 12.16 17.52 22.70 32.69 42.36
28 3.78 7.06 13.18 18.98 24.59 35.42 45.88
30 4.08 7.61 14.20 20.45 26.49 38.16 49.43

32 4.37 8.16 15.22 21.92 28.40 40.91

Information
Ordering

35 4.82 8.99 16.77 24.15 31.29 45.07

40 5.56 10.38 19.37 27.90 36.14 52.06
45 6.32 11.79 22.00 31.68 41.04
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 83

 Diamond
Chain

Chain
Difference
Diamond

Components

Chain Terminology and Single Strand Component Identification

Selection
Guide

Roller
Carbon
Steel

Pin
Bushing

Pin Link Plate Roller Link Plate

& Moisture
Corrosion
Resistant

Pitch - the distance from the Roller Link - an assembly made

center of one pin to the center of up of two rollers assembled over
Maintenance
Reduced

the next. General measure of the two bushings that are press-fit
“size” of the chain. onto two roller link plates. Roller
links are a chain subassembly
Pin Link Plate (“PLP”) - the component.
outside plate of a roller chain,
usually stamped with the Diamond Pin Link - an assembly made
Attachments

logo and ANSI size. up of two pins press fit into a pin
linkplate. There are three types
Roller Link Plate (“RLP”) - the of pin links (riveted, cottered,
inside plate of a roller chain. RLPs grooved), dependent on the type
are slightly larger than PLPs and of pins used. Pin links are a chain
contain larger pitch holes for subassembly component.
Application
Specific

the bushings. Image includes

bushings. Pin - a long solid cylinder that is
press-fit into the pin linkplate. The
Roller - a short hollow cylinder bushing fits over the pin, allowing
that fits loosely over the bushing flexibility of the chain joint. Pins
may either be riveted, cottered or
Horsepower

and rotates as it comes into

grooved.
Tables

contact with the sprocket.

Bushing - a hollow cylinder that is

press-fit into the roller link plates.
Pins in the pin link plate are free
Components

to rotate within the bushing, while

Chain

rollers rotate freely outside the

bushing.
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

84 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Difference
Diamond
Single and Multiple Strand Component Identification

Selection
Guide
Single Strand Chain

Spring Clip Connecting Link - Riveted Connecting Link -

Standard connecting link for up to Optional construction for all roller
ANSI 60 chain, the cover linkplate chain sizes. Connecting link is
is held in place by a spring press-fit onto pins; pins should be

Carbon
Steel
clip, split at one end to permit riveted or peened on the ends once
easy installation and removal. cover link plate installed.
Standard with slip fit cover link
plates, press fit also available and Single-Pitch Offset Link - Links
recommended for heavy duty which can be added using a slip-fit

& Moisture
applications. Open-ended spring

Corrosion

Resistant
bolt and cotter key to add a single
clip standard, closed-end spring pitch length to the chain.
clip optional.
Two-Pitch Offset Link - similar
Cottered Connecting Link - to a single pitch offset link except
Standard connecting link for ANSI

Maintenance
assembled into the chain. Press

Reduced
80 and larger chain, the cover fit construction increases rigidity,
linkplate is held in place by cotter reliability and durability and is
pins. Standard slip fit cover plates recommended over the single pitch
for single strand chain, standard offset link. For single strand chain
press fit cover plates on multiple only.
strand. Press fit cover plate also

Attachments
available option for single strand
chain.

Application
Specific
Multiple Strand Chain

Slip-Fit Center Plate - designed Bushed Center Link Plate

for ease of assembly and (BCL) - connecting link designed

Horsepower
disassembly, they are best suited for multi-strand applications that

Tables
for drives of moderate severity. offers virtually the same durability
However, drive may experience and resistance to fatigue as press-fit
accelerated fatigue in exchange center links but with slip-fit center
for ease of field alteration . plate ease of assembly. Each center

Components
plate utilizes precision ground
hardened bushings for optimal
Chain
Press-Fit Center Plate -
designed for severe drive performance.
conditions, the press-fit center
plate offers significantly greater Four-Pitch Press-Fit Offset
durability, ruggedness and fatigue Link Assembly - utilizing press-fit
Troubleshooting

strength. Widely accepted for pins in offset link pitch holes, four
use on diesel engines, heavy duty pitch length permits use of BCL
Tools,

equipment, power shovels, and connecting links on either end,

oil drilling and pumping units. Not combining strength and flexibility to
able to be modified in field, should chain assembly.
always be ordered to exact length
utilizing a Bushed Center Plate
Information
Ordering

Link (BCL) connecting link.

Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 85

 Diamond
Chain

Tools,
Difference
Diamond

Troubleshooting

Chain Assembly and Disassembly Tools

Selection
Guide

Connecting Tools
CT35
Connecting Tool - Small
For use with ANSI 35 through 60H roller chain.
Carbon
Steel

CT80
& Moisture
Corrosion
Resistant

Connecting Tool - Large

For use with ANSI 80 through 240 single strand chain and most conveyor and engineered chains with a
width of 5/8" or wider between the inside links. For multi-strand chains, a second connecting tool will aid in
the alignment of the chain.
Maintenance
Reduced

CT80-Cable
Cable Connecting Tool - Large
For use with ANSI 80 through 240 single strand, multi-strand and double-pitch chain, and most conveyor
and engineered chains with a width of 5/8" or wider between the inside links. This tool holds the ends of a
chain together during the connection process.
Attachments

Pin Extractor Tools

Application
Specific

PE113
Pin Extractor - Small
For use with ANSI 25 through 60H roller chain.
Horsepower
Tables

PE135
Pin Extractor - Large
For use with ANSI 80 through 100H roller chain.
Components
Chain

PERE157
Pin Extractor - Extra Large
Troubleshooting

For use with ANSI 120 through 160 roller chain.

Tools,

PE-MAX
Information

Pin Extractor - High Speed

Ordering

For use with with ANSI 25 through 80 or British 05B through 16B
Conditions
Terms and

86 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Using the Assembly and Disassembly Tools

Connecting Tools

Difference
Diamond
CT35 & CT80
Hook the two arms of the connecting tool onto each end of the chain. Turn the screw clockwise to bring the two
ends of chain towards each other. Insert the connecting link and complete assembly. Note: This tool is not made
to stretch chain but to hold chain in place for assembly.

Selection
Guide
CT80·CABLE
Place the hooks of the connecting tool on the rollers past the link or links to be removed or replaced. The slack
in the cable should be taken up with a wrench until the chain between the hooks is relieved of tension. This will
allow for the removal of the link with a roller chain pin extractor. A new master or replacement link can then be
inserted. The cable can then be released with the lock lever and the tool can be removed.

Carbon
Steel
Pin Extractors
PE113, PE135 & PERE157

& Moisture
Corrosion

Resistant
It is recommended that the"side-mashed" or"spun" pin heads be ground flush to the pin linkplate prior to pin
extraction to ensure that the chain bushing will not be damaged. Place the jaws of the tool over the roller with
the push-out pin centered on the chain pin. Tighten down by turn­ing the top handle clockwise until the chain
pin loosens, driving it partially through the linkplate. Follow the same procedure on the other pin. Return to the

Maintenance
original pin and force completely through the pin linkplate. Do the same on second pin, freeing linkplate from the

Reduced
pins. Remove disassembled pin link from the chain.

PE MAX
Begin by grinding the desired pin heads flush with the link plate. Then, select the correct chain model on the

Attachments
carousel and insert the chain at the point you wish to remove the pin. Ensure that the pressure pins are resting
on the center of each chain pin. Next, pull the lever down and use continuous pressure to force the pins from the
chain. Once the pin has been removed, replace the lever to the upright position and disassemble the chain.

Application
Specific
WARNING: When Assembling or Disassembling Chain:
• Always use safety glasses to protect your eyes.

Horsepower
• Wear protective clothing, gloves, and safety shoes.

Tables
• Support the chain to prevent uncontrolled movement
of chain and parts.
• Tools should be in good condition and properly used.

Components
• Tools are not made to support total weight of chain,
only to take up slack. Chain

• Never use extension on handle which could overload

device and cause possible injury.
Troubleshooting

• Do not attempt to connect or disconnect chain unless

Tools,

you know the chain construction, including the correct

direction for pin/rivet removal or insertion.
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 87

 Diamond
Chain

Roller Chain Wear

Chain does not"stretch" - elongation is caused when
material is removed from the pins and bushings.
Difference
Diamond

The individual joints in a roller chain articulate as they

enter and exit the sprockets. This articulation results
in wear on the pins and bushings. As material is worn
away from these surfaces, the chain will gradually
elon­gate.
Selection
Guide

For a free chain wear gauge, please

contact The Diamond Chain Company at
[email protected]
Carbon
Steel

Elongation Control
Elongation is normal and may be minimized through proper lubrication and drive maintenance. The rate of wear is
dependent upon the load and the amount of bearing area between pin and bushing, the material and surface condition
& Moisture
Corrosion
Resistant

of the bearing surfaces, the adequacy of lubri­cation, and the frequency and degree of articulation between pins and
bushings. The latter is determined by the quantity of sprockets in the drive, their speeds, the number of teeth, and the
length of the chain in pitches.
Maintenance
Reduced

Check Chain Wear

Roller chains should be replaced when worn (elongated beyond 3%) or when the chain rollers begin to "ride high"
near the tips of the teeth on relatively large sprockets. Do not connect or splice a new section to a worn chain. Do not
continue to run a chain worn in excess of 3% (or less in some applications), the chain will not engage the sprockets
Attachments

properly and increased damage to the sprockets may occur.

Chain Wear Elongation Limits

Application

Measured Length
Specific

Chain Pitch Nominal At 3% Wear

ANSI Chain No. Pitches
Inch MM Inch MM Inch MM
25 .250 6.35 48 12.00 305 12.375 314
35 .375 9.52 32 12.00 305 12.375 314
Horsepower

41 .500 12.70 24 12.00 305 12.375 314

Tables

40 .500 12.70 24 12.00 305 12.375 314

50 .625 15.88 20 12.50 318 12.875 327
60 .750 19.05 16 12.00 305 12.375 314
80 1.000 25.40 12 12.00 305 12.375 314
100 1.250 31.75 20 25.00 635 25.750 654
Components

120 1.500 38.10 16 24.00 610 24.719 628

Chain

140 1.750 44.45 14 24.50 622 25.250 641

160 2.000 50.80 12 24.00 610 24.719 628
180 2.250 57.15 12 27.00 686 27.812 706
200 2.500 63.50 10 25.00 635 27.750 654
Troubleshooting

240 3.000 76.20 8 24.00 610 24.719 628

Tools,
Information
Ordering
Conditions
Terms and

88 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
How To Measure Chain Wear
1 - As a safety precaution, shut off power and lock out gears and sprockets before attempting to measure chain wear.

Difference
Diamond
2 - Determine the pitch of the chain. This is typically stamped on the outer linkplates of the chain. It can also be
determined by measuring the distance from the center of one pin to the center of the next pin. Refer to the Diamond
Chain product catalog for a list of ANSI standard chain models and correlating pitch measurements or visit www.
diamondchain.com.

Selection
Guide
3 - For reliable linear measurement, a taut span of chain must be used. Using slack chain will result in inaccurate
measurements.

Carbon
4 - Choose either a 1.5% or 3% wear elongation limit to check your span of chain. Each percentage correlates to a

Steel
different side of the scale. The maximum allowable wear elongation is typically 3% for most industrial applications,
depending upon sprocket design. In drives having fixed center distances, chains running in parallel, or where
smoother operation is required, chain wear should be limited to approximately 1.5%.
Example: Using ASMEIANSI 60 roller chain, 13 pitches would measure 9.75 inches for nominal length (13 pitches x .75 pitch).

& Moisture
Corrosion

Resistant
A maximum wear calculation of 3% would be 1.03 x 9.75 or 10.0425 inches. A maximum wear calculation of 1.5% would be 1.015
x 9.75 or 9.896 inches.

5 - Refer to the table on the wear gauge for the number ANSI BS No. of Pitches ANSI BS No. of Pitches

Maintenance
Reduced
of pitches to inspect. The more pitches (pins) included 25 33P 120 24B 8P
in the measurement provides the truer representation of 35 06B 23P 140 28B 6P
the average amount of wear distributed throughout the 40 08B 18P 160 32B 5P
chain. 50 10B 15P 180 5P
60 12B 13P 200 40B 5P
Example: For ASME/ANSI 60 roller chain, 13 pitches will be

Attachments
80 16B 11P 240 4P
measured.
100 20B 9P

6 - Place the inside corner of the wear scale around one

pin, using that pin as "0", or your starting point.

Application
Specific
7 - Starting at "0", count the number of pins/pitches to
be measured for your chain's length.
Example: Count from 0 to 13 for ASME/ANSI 60 roller chain. Step 6

Horsepower
Tables
8 - If the center of the indicated pin does not reach the 0 1 2 3 4 5 6 7 8 9 10 11 12 13

wear line for the correspond­ing chain size, the chain has
not reached the wear limit.
Example: For ASME/ANSI 60 roller chain, if the center of

Components
the 13th pin does not reach the # 60 wear mark, the chain
remains usable.
Chain
Step 7

11 12 13
9 - If the center of the indicated pin is at or beyond the
indicated line, the chain is worn to the wear limit (1.5%
Troubleshooting

or 3%, depending on the scale used) and should be

Tools,

replaced.
Example: For ASME/ANSI 60 roller chain, if the center of the
13th pin reaches or exceeds the # 60 wear mark, the chain Step 8
should be replaced. 11 12 13
Information
Ordering

Step 9
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 89

 Diamond
Chain

Troubleshooting Guide

CONDITION/SYMPTOM POSSIBLE CAUSE WHAT TO DO

Difference
Diamond

Tight Joints Dirt or foreign material in chain joints. Clean and re-lubricate chain.
Inadequate lubrication. Replace chain. Re-establish proper lubrication.
Misalignment. Replace sprockets and chain if needed.
Realign sprockets.
Selection
Guide

Internal corrosion or rust. R eplace chain. Eliminate cause of corrosion

or protect chain.
Overload bends pins or spreads roller linkplates. Replace chain. Eliminate cause of overload.
Rusted Chain Exposed to moisture. Replace chain. Protect from moisture.
Water in lubricant. Change lubricant. Protect lubrication system
Carbon
Steel

from water. Replace chain.

Inadequate lubrication. Provide or re-establish proper lubrication.
Replace chain if needed.
Turned Pins Overload. Replace chain. Eliminate cause of overload.
& Moisture
Corrosion
Resistant

Inadequate lubrication. Replace chain. Re-establish proper lubrication.

Maintenance

Enlarged Holes Overload. Replace chain. Eliminate cause of overload.

Reduced
Attachments

Broken Pins Extreme Overload. Replace chain. Replace sprockets if indicated.

Broken Linkplates Eliminate cause of overload or redesign drive for
larger pitch chain.
Application
Specific

Broken, Cracked or Deformed Rollers Speed too high. Replace chain. Reduce speed.
Sprockets too small. Replace chain. Use larger sprockets, or possibly
Horsepower

redesign drive for smaller pitch chain.

Tables

Chain riding too high on sprocket teeth. Replace chain. Re-tension chain more often.

Pin Galling Speed or load too high. Reduce speed or load. Possibly redesign drive
Components

for smaller pitch chain.

Chain

Inadequate lubrication. Provide or re-establish proper lubrication.

Chain Climbs Sprocket Teeth Excess chain slack. Re-tension chain.

Troubleshooting

Excessive chain wear. Replace and re-tension chain.

Tools,

Excessive sprocket wear. Replace sprockets and chain.

Excessive overload. Replace chain. Eliminate cause of overload.
Information
Ordering
Conditions
Terms and

90 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Troubleshooting Guide

CONDITION/SYMPTOM POSSIBLE CAUSE WHAT TO DO

Difference
Diamond
Missing or Broken Cotters Cotters installed improperly. Install new cotters per manufacturer’s instructions.
Vibration. Replace chain. Reduce vibration. Use larger sprockets.
Excessively high speed. Replace chain. Reduce speed.
Redesign drive for smaller pitch chain.

Selection
Guide
Exposed Chain Surfaces Exposure to corrosive environment. Replace chain. Protect from hostile environment.
Corroded or Pitted

Cracked Linkplates Exposure to corrosive environment combined Exposure to corrosive environment combined with
(Stress Corrosion) with stress from press fits. stress from press fits.

Carbon
Steel
Cracked Linkplates (Fatigue) Load is greater than chain’s dynamic capacity. Replace chain. Reduce dynamic loading or redesign

& Moisture
drive for larger chain.

Corrosion

Resistant
Battered Linkplate Edges Chain striking an obstruction. Replace chain. Eliminate interference.

Maintenance
Reduced
Worn Linkplate Contours Chain rubbing on casing, guide, or obstruction. Replace chain if 5% or more of height worn away.
Re-tension chain.

Attachments
Eliminate interference.

Excessive Noise Chain striking an obstruction. Replace chain. Eliminate interference.

Application
Loose casing or shaft mounts. Tighten fasteners.

Specific
Excess chain slack. Re-tension chain.
Excessive sprocket wear. Replace and re-tension chain.
Sprocket misalignment. Replace chain and sprockets, if needed.
Realign sprockets.

Horsepower
Tables
Inadequate lubrication. Replace chain if needed.
Re-establish proper lubrication.
Chain pitch too large Redesign drive for smaller pitch chain.
Too few sprocket teeth. Check to see if larger sprockets can be used.

Components
If not, redesign drive.

Chain
Wear on Inside of Roller Linkplates Sprocket misalignment. Replace sprockets and chain if needed.
and One Side of Sprockets Realign drive. Re-tension chain.
Chain Clings to Sprocket Excessive sprocket wear. Replace sprockets and chain.
Troubleshooting

Sprocket misalignment. Replace sprockets and chain if needed.

Realign sprockets.
Tools,
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 91

 Diamond
Chain

Ordering
Difference
Diamond

Information
Ordering Information
Important Addresses, Emails & Phone Numbers
Selection
Guide

Americas - Corporate Headquarters Europe, Asia, Middle East, Africa China

402 Kentucky Avenue Tundry Way Litong Plaza Room 2204
Indianapolis, IN 46225 USA Chainbridge Industrial Estate No. 1350 North Sichuan Rd.
Blaydon on Tyne Hongkou District, Shanghai, 200080, China
[email protected] Tyne & Wear
Carbon
Steel

[email protected] NE21 5SJ [email protected]

United Kingdom
317.638.6431 +86-512-6265-3075
800.872.4246 [email protected]
317.613.2243 (fax)
& Moisture
Corrosion

+44-191-414-8822
Resistant

WWW.DIAMONDCHAIN.COM

Ordering Terminology
Maintenance
Reduced

Chain-6 pitches long, including connecting link. Chain-24 pitches long, riveted endless with no connecting link.
Attachments

Chain-5 pitches long, including connecting link and Chain-9 pitches long, with bent attachments,both sides
Application

one-pitch offset. of chain, every pitch.

Specific
Horsepower
Tables

Chain-7 pitches long, including two-pitch Chain-9 pitches long, with straight attachments, every pitch.
offset and connecting link.
Components
Chain
Troubleshooting
Tools,

Chain-5 pitches long, roller link each end. Chain-9 pitches long, with all pins extended.
Information
Ordering
Conditions
Terms and

92 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Ordering Information
Ordering Examples
#60-2 riveted chain, press-fit center plate, 168 pitches including connecting link.

Difference
Diamond
#35 riveted chain, 100 foot reel.
#60 cottered chain, 56 pitches including connecting link.
#50 riveted chain, 57 pitches including two pitch offset and connecting link.
#80 riveted chain, 36 pitches with straight attachments, one side of chain on pin links at four-pitch spacing,

Selection
Guide
class 1 matched pair.

Ordering Details
All chains are furnished with connecting links unassembled unless otherwise specified.
Spring clip, slip fit, connecting links are standard for ASME/ANSI #60 and smaller. Open-ended spring clip standard,

Carbon
Steel
closed-end spring clip optional.
Cottered, slip-fit, connecting links are standard for ASME/ANSI #80 and larger.
Double-pitch conveyor roller chains with oversized rollers use same connecting links as standard rollers.
Duralube LIVE chains use same connecting links as standard series chain.

& Moisture
Corrosion

Resistant
Pitch size does not allow ANSI #140 chain to be supplied in 10 foot lengths; instead it is provided in 10.21 foot
lengths (3,112 mm) (70 pitches).
Pitch size does not allow ANSI #180 chain to be supplied in 10 foot lengths; instead it is provided in 10.13 foot
lengths (3,088 mm) (54 pitches).

Maintenance
Reduced
ASME/ANSI Number Pitch (fraction) Pitch (Decimal) Pitches per foot Instructions
Divide # pitches in chain by pitches per foot for length in feet
47 0.147 81.36
Multiple length in feet by 30.48 to convert to cm
25 1/4 0.250 48
35 3/8 0.375 32

Attachments
Example
40-41 1/2 0.500 24 Convert 84 pitches of #160 chain to feet
50 5/8 0.625 19.20 84 pitches ÷ 6 pitches/foot = 14 feet
60 3/4 0.750 16 14 feet * 30.48 cm/foot = 426.7 cm
80 1 1.000 12
100 1 1/4 1.250 9.6

Application
120 1 1/2 1.500 8

Specific
140 1 3/4 1.750 6.86
160 2 2.000 6
180 2 1/4 2.250 5.33
200 2 1/2 2.500 4.80
240 3 3.000 4

Horsepower
Tables
Components
Chain
Troubleshooting
Tools,
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 93

 Diamond
Chain

Standard Packaged Roller Chain Weights

The table below contain the weights of standard packaged roller chain. Additional lengths available upon request.
Difference
Diamond

10 ft 50 ft 100 ft
ASME/ANSI or (3.05m) (15.2m) (30.5m)
Diamond Number Boxes Reel Reel

lbs kg lbs kg lbs kg

Single Strand Chain
Selection

47 (micropitch) 0 0.2 2 0.9

Guide

25 1.0 0.5 5 2.4 11 5.0

35 2.2 1.0 13 5.9 23 10.4
41 3.0 1.4 16 7.3 29 13.2
40 4 1.8 22 10.0 43 19.5
50 7 3.2 37 16.8 71 32.2
60 10 4.5 51 23.1 112 50.8
80 17 7.7 97 44.0 170 77.0
Carbon

100 25 11.3 126 57.2 252 114.1

Steel

120 37 16.8
140* 51 23.1
160 66 29.9
180** 87 39.5
200 105 47.6
240 170 77.1
Double Strand Chain
& Moisture
Corrosion
Resistant

25-2
35-2 5 2.0 23 10
40-2 8 3.7 41 19 83 37.5
50-2 14 6.1 67 30 135 61.2
60-2 20 9.1 100 45
80-2 34 15.4 163 74
Maintenance

100-2 51 23.1
Reduced

120-2 75 34.0
140-2* 100 45.4
160-2 132 59.9
180-2** 180 81.6
200-2 215 97.5
Triple Strand Chain
35-3 7 3.2
Attachments

40-3 12 5.4
50-3 20 9.1
60-3 29 13.2
80-3 51 23.1
100-3 76 34.5
120-3 112 50.8
140-3* 148 67.1
160-3 192 87.1
Application
Specific

180-3** 265 120.2

200-3 323 146.5
Quadruple Strand Chain
60-4 40 18.1
80-4 66 29.9
100-4 100 45.4
120-4 148 67.1
Horsepower

140-4 195 88.5

Tables

160-4 258 117.0

Double Pitch Single Strand Chain
2040 3 1.4
C2040 3 1.5
2050 5 2.3
C2050 6 2.7
Components

2060 8 3.4 74 33.6

Chain

C2060H 11 5.0 107 48.5

C2080H 15 6.6
Non-Standard Chains
65 x 1/8 2 0.9
867 x 5/16 4 2.0
148 x 1/4 6 2.8
Troubleshooting

148 x 5/16 7 3.0

435 x 1/2 13 5.9
Tools,

*Default container for 140 chain is 10.2' (3.1m) boxes.

*Default container for 180 chain is 10.1' (3.1m) boxes.
Information
Ordering
Conditions
Terms and

94 1-800 US CHAIN (872-4246) | diamondchain.com

 Diamond
Chain
Standard Packaged Roller Chain Parts
The table below contain the weights of standard packaged roller chain parts.
Weights are for product and container only, and do not include any accompanying overpack, pallets, etc…

Difference
Diamond
Connecting Links Roller Links Single Pitch Offset Links
ASME/ANSI or
Spring Clip Type Cotter Pin Type
Diamond Number
Qty/box Wt (lbs) Wt (kgs) Qty/box Wt (lbs) Wt (kgs) Qty/box Wt (lbs) Wt (kgs) Qty/box Wt (lbs) Wt (kgs)
Single Strand Chain
47 (micropitch) 50t 0.3 0.1 50 0.3 0.1
25 50t 0.3 0.1 50 0.3 0.1 50 0.5 0.2
35 50t 0.8 0.4 50 0.8 0.4 50 0.8 0.4

Selection
Guide
41 50t 0.8 0.4 50 0.8 0.4 50 0.8 0.4
40 50t 1.0 0.5 50 1.3 0.6 50 1.3 0.6
50 50t 2.0 0.9 50 2.5 1.1 50 2.5 1.1
60 50 3.0 1.4 50 3.0 1.4 50 4.0 1.8 25 2.0 0.9
80 50 7.5 3.4 50 7.5 3.4 50 9.0 4.1 25 4.5 2.0
100 1 0.3 0.1 1 0.3 0.1 1 0.3 0.1
120 1 0.4 0.2 1 0.5 0.2 1 0.5 0.2
140 1 0.6 0.3 1 0.8 0.4 1 0.8 0.4

Carbon
Steel
160 1 0.9 0.4 1 1.3 0.6 1 1.3 0.6
180 1 1.5 0.7 1 2.0 0.9 1 2.0 0.9
200 1 1.9 0.9 1 2.5 1.1 1 2.4 1.1
240
65 x 1/8 50t 0.8 0.4 50 0.8 0.4 50 0.8 0.4
867 x 5/16 50 0.4 0.2 20 0.5 0.2 20 0.5 0.2
Double Strand Chain

& Moisture
Corrosion

Resistant
25-2 50t 0.5 0.2 1 0.1 0.0
35-2 50t 0.5 0.2 1 0.1 0.0
40-2 50t 1.5 0.7 1 0.1 0.0
50-2 50t 3.0 1.4 1 0.1 0.0
60-2 25 2.5 1.1 1 0.2 0.1
80-2 25 5.5 2.5 1 0.3 0.1
100-2 1 0.5 0.2 1 0.6 0.3

Maintenance
120-2 1 0.8 0.4 1 1.0 0.5

Reduced
140-2 1 1.2 0.5 1 1.6 0.7
160-2 1 1.8 0.8 1 2.4 1.1
180-2 1 2.8 1.3 1 3.6 1.6
200-2 1 3.7 1.7 1 4.7 2.1
Triple Strand Chain
35-3 1 0.02 0.009 1 0.1 0.0

Attachments
40-3 1 0.04 0.018 1 0.1 0.0
50-3 1 0.10 0.045 1 0.1 0.0
60-3 1 0.2 0.1 1 0.2 0.1
80-3 1 0.4 0.2 1 0.4 0.2
100-3 1 0.7 0.3 1 0.9 0.4
120-3 1 1.1 0.5 1 1.5 0.7
140-3 1 1.8 0.8 1 3.6 1.6
160-3

Application
180-3

Specific
200-3 1 5.4 2.4 1 7.0 3.2
Quadruple Strand Chain
35-4 1 0.03 0.014 1 0.1 0.0
40-4 1 0.10 0.045 1 0.1 0.0
50-4 1 0.10 0.045 1 0.2 0.1
60-4 1 0.2 0.1 1 0.3 0.1
80-4 1 0.4 0.2 1 0.6 0.3

Horsepower
100-4 1 0.9 0.4 1 1.1 0.5

Tables
120-4 1 1.5 0.7 1 2.0 0.9
140-4 1 2.4 1.1 1 3.1 1.4
160-4 1 3.5 1.6 1 4.8 2.2
Double Pitch Single Strand Chain
2040 50t 1.3 0.6 50t 1.3 0.6 50 1.3 0.6 50 1.3 0.6
C2040 50t 1.3 0.6 50t 1.3 0.6 50 1.3 0.6

Components
2050 50t 2.5 1.1 50t 2.5 1.1 50 2.5 1.1 50 2.5 1.1

Chain
C2050 50t 3.0 1.4 50t 3.0 1.4 50 3.0 1.4
2060 25 2.0 0.9 25 2.0 0.9 50 4.5 2.0 25 2.0 0.9
C2060H 25 3.3 1.5 25 3.3 1.5 25 3.3 1.5
C2080H
Non-Standard Chains
65 x 1/8 50t 0.8 0.4 50 0.8 0.4 50 0.8 0.4
Troubleshooting

867 x 5/16 50 0.4 0.2 20 0.5 0.2 20 0.5 0.2

148 x 1/4
Tools,

148 x 5/16
435 x 1/2
t: One connecting link per poly bag in box of 50
Information
Ordering
Conditions
Terms and

diamondchain.com | 1-800 US CHAIN (872-4246) 95

 Diamond
Chain

Diamond Chain
Difference
Diamond

Company

Product Terms and Conditions/Warranty/Application Considerations

Selection
Guide

Terms and Conditions

1. Unless otherwise shown here on, all terms are f.o.b. Seller’s plant 8. Buyer’s order is accepted on the terms and conditions stated herein
and net 30 days at Seller’s prices in effect on the date of shipment. and Seller’s acceptance of Buyer’s order is expressly made conditioned
Shipments and deliveries shall at all times be subject to approval of the upon Buyer’s assent to such terms and conditions. No agreement
Seller. If Buyer shall fail to make any payments in accordance with the or understanding, oral or written, shall be binding on Seller (whether
terms hereof, Seller may cancel this order as to any undelivered items, contained in Buyer’s purchase forms or otherwise), other than set forth
Carbon

and in addition to its other rights and remedies, but not in limitation herein, if such shall in any way modify or waive the terms or conditions
Steel

thereof, at Seller’s option, defer or withhold shipments or deliveries herein, unless hereafter made in writing and signed by Seller’s authorized
hereunder (or under any other contract with Buyer) except upon Seller’s representative. Waived by Seller of any default hereunder shall not be
receipt of cash before shipment or such security as Seller deems deemed a waiver by Seller of any other or subsequent default which may
satisfactory. thereafter occur.
2. Unless otherwise shown as included in the price, such prices does 9. These terms and conditions shall be construed in accordance with the
& Moisture

laws of the State of Illinois.

Corrosion
Resistant

not include any freight rate increases and/or added expense resulting
from compliance with Buyer’s shipping instructions whether or not
reflected in Buyer’s order; the expense of intra-city delivery to rail Limited Warranty Policy
siding on shipments by rail; any applicable manufacturer’s sales, use
or value added taxes, import or export duties; the expense of special SELLER EXPRESSLY EXCLUDES ALL WARRANTIES, GUARANTEES
preparation for export including export packaging, consular invoices, AND REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING BUT
export declarations, certificates of origin, insurance in transit or similar NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, MATERIALS,
Maintenance

items; and examination or inspection charges incident to inspection by WORKMANSHIP, DESIGN AND SUITABILITY FOR A SPECIFIED OR
Reduced

other than Seller’s employees or agents. Buyer will be invoiced for those INTENDED PURPOSE. In lieu thereof, any goods which upon Seller’s
items where applicable; import licenses, foreign exchange and customs determination are defective in due to faulty material, workmanship or design,
approval required in connection with the purchase, delivery or payment as determined by Seller, will be repaired, or replaced, f.o.b. point of origin, or
of goods, materials and products (hereinafter referred to as “goods”) are the unit purchase price refunded, at Seller’s option; provided that the goods
to be obtained by and provided at Buyer’s expense. In no event shall are returned (upon Seller’s written consent first being given), or the same are
Buyer’s shipping instructions waive any term or condition as to delivery rejected, in either event within ten (10) years of sale for the Diamond product
Attachments

herein. series, five (5) years of sale for the Infinity product series, and one (1) year for
the Sapphire product series, except that as to goods purchased by Seller
3. Starting costs cover in part tools, dies, and fixtures complementing from others and resold to Buyer or incorporated in Seller’s goods, Buyer
equipment peculiar to the Seller’s facility and would ordinarily have little shall have remaining warranty available from Seller’s supplier which shall be
use elsewhere. Title to such tooling remains with the Seller. Buyer’s sole recourse. Seller shall not be liable for Buyer’s loss of profit or
4. Because of manufacturing allowances essential in the production of any special or consequential damage or loss, nor for any cost incurred by
made-to-order items, the seller reserves the right to ship and Buyer Buyer for alteration, field modification, repair or work done on the goods
agrees to accept an overrun of any quantity up to and including 10% without Seller’s express approval in writing prior to any such alteration, field
Application
Specific

when made-to-order items are ordered. modifications, repair or work. Seller’s total liability shall in no event exceed
the purchase price of the goods purchased.
5. Deliveries shall be considered made when the goods hereunder, or
any part thereof, are either loaded on inland carriers evidenced by Unless specifically stated to the contrary on the face of the order, the Buyer
transportation receipts or placed in storage, whichever shall be earlier in represents that none of the materials supplied hereunder are to be used in
time. At that time title to and risk of loss of the goods shall pass to Buyer. a motor vehicle in such a manner as to be subject to the safety standards
Seller shall not be responsible for delay in or failure of deliveries resulting adopted under the National Traffic and Motor Vehicle Safety Act of 1966,
Horsepower

from any cause beyond Seller’s control, including without limitation: fire, and Buyer agrees to indemnify the Seller against any liability under said Act
Tables

act of God or force majesture, riot, civil demonstrations, insurrection, if such representation is not correct. If the materials are to be subject to
war or national emergency, strike or labor dispute, freight embargo or such standards and the Buyer specifically so state, the Seller, if it accepts
transportation delay, shortage of labor, inability to secure fuel, material, the order, warrants that the material complies with all applicable standards
supplies or power at current prices or on account of shortage thereof, under said Act.
demands exceeding Seller’s manufacturing or delivery capacity, or any
governmental law, act, order, rule or regulation issued by any official Application Considerations
Components

or governmental agency (local, state, federal or foreign) affecting the

conduct of Seller’s business and with which Seller in its judgment or The proper selection and application of roller chain and roller chain
Chain

discretion deems it advisable to comply whether or not it may have any components, including the related area of product safety, is the
legal duty to do so. Buyer agrees to inspect at Buyer’s expense and risk responsibility of the customer. Operating and performance requirements
all goods before acceptance, and to refuse acceptance unless any loss and potential associated issues will vary appreciably depending upon
or damage in transit is fully noted on the delivery bills and receipts. Seller the use and application of such products and components. The scope
assumes no responsibility for damage to or loss of goods occurring of the technical and application information included in this publication
Troubleshooting

during shipment or delivery, and Buyer agrees to make all claims for any is necessarily limited. Unusual operating environments and conditions,
such damage or loss. including lubrication, loading, and other factors, can materially affect the
Tools,

application and operating results of the products and components and the
6. Cancellation or change in any order by Buyer shall not be effective customer should carefully review its requirements. Any technical advice or
without notice received, agreed to, and confirmed in writing by Seller. In review furnished by Diamond Chain Company and its affiliates with respect
the event Seller in its discretion approves Buyer’s cancellation or change to the use of products and components is given in good faith and without
of an order, Buyer agrees to pay a reasonable cancellation or inventory charge, and Diamond Chain Company assumes no obligation or liability for
carrying charge. Seller’s prior written consent must be obtained before the advice given, or results obtained, all such advice and review being given
Information

returning any goods. and accepted at customer’s risk.

Ordering

7. Any action by Buyer under or for breach of this agreement must be

commenced within two (2) years after the cause of action has accrued.
Conditions
Terms and

96 1-800 US CHAIN (872-4246) | diamondchain.com

Notes
 Diamond Chain Company is the recognized world leader in the design
and manufacture of high quality, high performance roller chain.
Since 1890, we’ve produced tens of thousands of types of roller chain for
a wide variety of applications from oil field to conveyors and to combines.
Our commitment to quality includes being certified by both
ISO 9001:2000 and the American Petroleum Institute.

402 Kentucky Avenue Indianapolis, IN 46225

1-800 US CHAIN (872-4246)
diamondchain.com

Doc ID: DC1000-201712