Bituflex PU (MSDS)

MATERIAL SAFETY DATA SHEET
BITUFLEX PU
1. PRODUCT AND COMPANY INFORMATION

i) Product Information:-
Product Name: BITUFLEX PU

Application: Waterproofing Membrane System
Physical form: Thick Liquid Slurry
Colour: Dark Brown
CAS No.: Mixture
ii) Company Information:-
Manufacturer: Easy-Fix Chemicals Industry

Address: No. 1, Jalan Gambus 33/4A, Taman Perindustrian Elite,
Seksyen 33, 40400, Shah Alam, Selangor Malaysia.
Tel: (603) 51226271 / 51226291
Fax: (603) 5519 2366
2. COMPOSITION / INFORMATION ON INGREDIENTS

Composition : Polyurethane, Water Based Emulsified Bitumen Filler
Hazardous Ingredients(s) Symbol Risk Phrases Other Information %

-
All constituents of this product are listed in EINECS (European inventory of Existing Commercial Chemical Substances) or
EILINCS (European List of New Chemical Substances) or are exempt
Refer to Section 8 for Occupational Exposure Limits.
3. HAZARDS IDENTIFICATION
Irritant to eyes, respiratory systems and skin.
IRRITANT
Page 1 of 4
BITUFLEX PU
4. FIRST AID MEASURES

Eyes : Irrigate immediately with copious of quantities of water for several minutes. Obtain medical
attention urgently.
Skin : Wash the affected with plenty of running water and mild soap. If irritation continues, immediately consult a
physician for examination and treatment.
Inhalation : Move the patient at once to fresh water air. Immediately consult a physician for examination and treatment.
Ingestion : Induce vomiting. Wash out the mouth with water and give victim plenty of water to drink. Call a physician or
poison control center immediately. Never give anything by mouth to an unconscious person.
5. FIRE FIGHTING MEASURES

Suitable Extinguishing Media: Water spray, alcohol foam, dry chemical powder or carbon dioxide. Do not use
water jets.
Special Exposure Hazards : Decomposition product- Oxides of carbon, nitrogen and isocyanate vapour, and
in some fire circumstances, hydrogen cyanide.
Special Protective Equipment : Self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES

Personal Precautions: Wear adequate personal protective equipment.
Environmental Precautions: Ventilate Area.
Decontamination Procedures: Absorb onto earth, sand or similar inert material and transfer to as suitable
container. Remove by best available means. Dispose of as waste. Operators
dealing with spillages should wear suitable protective equipment.
7. HANDLING AND STORAGE

Handling : Keep material away from sparks, flames and other ignition sources.
Storage : Store in cool, dry area.
8. EXPOSURE CONTROL / PERSONAL PROTECTION

Engineering Control Measures : Use only well ventilated area. Local exhaust ventilation is recommended
methods are inadequate or impractical, appropriate personal protective
equipment must be used.
Personal Protective Equipment : Impervious gloves (eg: PVC). Google / safety glasses. Wear chemical resistant
boots.
Page 2 of 4
BITUFLEX PU
9. PHYSICAL AND CHEMICAL PROPERTIES

Colour Dark Brown
Physical Thick Liquid Slurry
Odour Mild Odor
pH (working dilution) 3-9
Boiling point / Range (°C) Approx. 100
Decomposition
Temperature (°C) > 150
Flash Point &
Method Used(°C) Water born emulsion
Vapour Density 1.0
Density 1.0 – 1.2
Water Solubility Miscible in all proportion
10. STABILITY AND REACTIVITY

Stability : Stable under normal conditions.
Conditions to avoid : Heat, flame, ignition source, dusting and incompatibies.
Materials to Avoid : Strong acids, Strong alkalis, Strong oxidizing agent.
Hazardous Decomposition Products: Oxides of carbon, alcohol, acetone.
11. TOXICOLOGICAL INFORMATION

On eyes : Irritating and may injure eye tissue if not removed promptly. Vapour may cause irritation.
On skin : Irritation. May cause sensitization. Harmful through absorption through the skin.
By Inhalation : Irritating to respiratory system. Vapours may cause headaches.
By Ingestion : May cause irritation of mouth, throat and digestive tract.
Chronic : Repeated and prolonged skin contact may lead to skin disorders.
12. ECOLOGICAL INFORMATION

Environmental Assessment : Contain volatile organic compound
Mobility : Mobile liquid. Contains volatile components. Insoluble in water.
Persistence & Degradability : Not readily biodegradable.
Bioaccumulative Potential : Not determined.
Ecotoxicity : Expected to be ecotoxic to fish / daphnia / algae.
13. DISPOSAL CONSIDERATION

Disposal must be in accordance with local and national legislation.
Unused Product : Dispose of in approved manner.
Used / Contaminated Product : As for Unused product.
Packaging : The method of disposal must be acceptable to the local authority.
Page 3 of 4
BITUFLEX PU
14. TRANSPORT INFORMATION

International Regulatiuons : This product is not classified as dangerousgood according to the international regulation
for transport by land, inland waterway, sea and air.
UN/SI No : -
Specification Precautionary
Transport Measure
And Condition : This product is not classified as dangerousgood according to the international regulation
for transport by land, inland waterway, sea and air.
15. REGULATORY INFORMATION

Application Regulation: Not regulated.
Risk Phrases : Irritating to eyes, respiratory system and skin.
Safety Phrases : Avoid inhalation of vapour
Avoid contact with skin and eyes.
Wear suitable gloves and eye / face protection.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
After contact with skin, wash immediately with plenty soap and water.
Literature Reference : 1. NIOSH/OSHA . Occupational Health Guidelines for Chemical Hazard, 1981
2. Safety Material Data Sheet (of raw material manufacture)
16. OTHER INFORMATION

The information given above is true and is based on our own study and research work and experience. EASY-FIX Chemicals
Industry does not provide warranty or guarantee for the products made at different conditions for which are beyond our
control. All separate trial cases should be studied and tested to obtain own parameter before any other and delivery.
Page 4 of 4

Bituflex PU (MSDS)

Uploaded by

Copyright:

Available Formats

Bituflex PU (MSDS)

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bituflex PU (MSDS)

Uploaded by

Copyright:

Available Formats

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY INFORMATION

Product Name: BITUFLEX PU

ii) Company Information:-

Manufacturer: Easy-Fix Chemicals Industry

2. COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous Ingredients(s) Symbol Risk Phrases Other Information %

4. FIRST AID MEASURES

5. FIRE FIGHTING MEASURES

6. ACCIDENTAL RELEASE MEASURES

7. HANDLING AND STORAGE

8. EXPOSURE CONTROL / PERSONAL PROTECTION

9. PHYSICAL AND CHEMICAL PROPERTIES

10. STABILITY AND REACTIVITY

11. TOXICOLOGICAL INFORMATION

12. ECOLOGICAL INFORMATION

13. DISPOSAL CONSIDERATION

14. TRANSPORT INFORMATION

15. REGULATORY INFORMATION

16. OTHER INFORMATION

You might also like