Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    T27208AQC

    Uploaded by

    piagiopersempre
    This document provides information about a quality control material for analyzing soya in wheat flour. The material contains 20g of wheat flour with a positive qualitative result for soya. Quantitative results from three different ELISA test kits show assigned values for soya ranging from 32.1 to 96.2 mg/kg. The material should provide suitable quality control and is stable for use until December 31, 2019 when stored at ambient conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    T27208AQC

    Uploaded by

    piagiopersempre
    36 views1 page
    This document provides information about a quality control material for analyzing soya in wheat flour. The material contains 20g of wheat flour with a positive qualitative result for soya. Quantitative results from three different ELISA test kits show assigned values for soya ranging from 32.1 to 96.2 mg/kg. The material should provide suitable quality control and is stable for use until December 31, 2019 when stored at ambient conditions.

    Original Description:

    FAPAS QC MATERIAL DATA SHEET

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a quality control material for analyzing soya in wheat flour. The material contains 20g of wheat flour with a positive qualitative result for soya. Quantitative results from three different ELISA test kits show assigned values for soya ranging from 32.1 to 96.2 mg/kg. The material should provide suitable quality control and is stable for use until December 31, 2019 when stored at ambient conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    T27208AQC

    Uploaded by

    piagiopersempre
    This document provides information about a quality control material for analyzing soya in wheat flour. The material contains 20g of wheat flour with a positive qualitative result for soya. Quantitative results from three different ELISA test kits show assigned values for soya ranging from 32.1 to 96.2 mg/kg. The material should provide suitable quality control and is stable for use until December 31, 2019 when stored at ambient conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Fera

    Sand Hutton, York, YO41 1LZ


    Tel: +44 (0)1904 462100 Fax: +44 (0)1904 500440
    [email protected] www.fapas.com

    FAPAS QC MATERIAL DATA SHEET T27208AQC


    Matrix Wheat Flour
    Weight / Volume of Contents 20 g

    Analyte Qualitative Results


    Soya POSITIVE (99% consensus)

    Quantitative Results
    Assigned No. of data points
    Analyte Value, xa Range for |z| ≤2 Units producing xa

    Neogen – Veratox for Soy 96.2 48.1 – 144.3 mg/kg 21


    (8410)
    R-Biopharm – Ridascreen 32.1 16.1 – 48.2 mg/kg 20
    Fast Soya (R7102)

    ELISA Systems – Soy 89.2 44.6 – 133.8 mg/kg 15


    (ESSOYPRD-48)

    This data sheet is applicable until 31 Dec 2019


    Recommended Storage on receipt Ambient
    Notes

    • Mix the QC material thoroughly before taking a representative analytical sample.


    • The assigned value has been derived from the consensus of laboratories taking part in
    the accompanying proficiency test, using a specific kit type. This is not a certified
    reference value.
    • Results for each analyte were separated into individual kit types and assessed separately.
    • The Range for |z| ≤2 is the concentration range within the limits of ±2 z-scores. The
    assigned value and its range have been established from the proficiency test data and are
    suitable for use by laboratories as a fit-for-purpose quality control measure.
    • Stability of the QC material has been established as sufficient for the scope of the
    proficiency test from previous experience, expert advice and published literature. FAPAS
    advises that the QC material is analysed within the recommended date. FAPAS QC
    materials are intended to be used as single-analysis samples.
    • Full details on the proficiency test procedure used to characterise this QC material are
    available in the Protocol, Part 1 - Common Principles, freely available to download from
    the FAPAS website.

    You might also like