Scribd
Upload
95 views2 pages

How To Update The Firmware Using TPPLC Utility

To update the firmware of a TP-Link device, the user must first download the latest firmware package from the TP-Link website. They then use the tpPLC Utility to locate their device, open the Update page, select the downloaded firmware file, and click Update. The user should not reset the device during the upgrading process and instead wait for it to complete.

Uploaded by

eem1kv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views2 pages

How To Update The Firmware Using TPPLC Utility

To update the firmware of a TP-Link device, the user must first download the latest firmware package from the TP-Link website. They then use the tpPLC Utility to locate their device, open the Update page, select the downloaded firmware file, and click Update. The user should not reset the device during the upgrading process and instead wait for it to complete.

Uploaded by

eem1kv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

How to update the firmware using tpPLC Utility (new logo)?

We will release the latest firmware at TP-Link official website (http://www.tp-link.com).


You can download and upgrade the latest firmware for your device.

Tips: For a powerline extender, it’s better to back up your current settings and update
the firmware on the web management interface.

To update the firmware, follow the steps below:

1. Download the latest firmware package specific to your product model from the
support page at http://www.tp-link.com.

2. Decompress the package to obtain the update file(s).

Note: You may obtain simply a BIN file, a GGL file or a combination of NVM and PIB
files, depending on the product model.

3. Open the utility, move your mouse over a device, and click the (Advanced)
icon.

4. Go to the Update page.

You may see either of the following pages, depending on the product model.
5. Select the obtained update file(s), and click Update.

6. Wait for the upgrading to complete.

Note: During the upgrading process, do not turn off or reset the powerline device.

Get to know more details of each function and configuration please go to


Download Center to download the manual of your product.

You might also like