Scribd
Upload
157 views1 page

High-Temp Industrial Grease

Statomic XHT is a synthetic grease formulated with fluorinated components for high-temperature applications up to 250°C. It has a low friction coefficient and works under medium to heavy loads. Statomic XHT has excellent resistance to heat, chemicals, and long lifetime due to its high cohesion structure. It has a low starting torque even at -25°C and separates oils well at high temperatures.

Uploaded by

Nibaldo Kamel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
157 views1 page

High-Temp Industrial Grease

Statomic XHT is a synthetic grease formulated with fluorinated components for high-temperature applications up to 250°C. It has a low friction coefficient and works under medium to heavy loads. Statomic XHT has excellent resistance to heat, chemicals, and long lifetime due to its high cohesion structure. It has a low starting torque even at -25°C and separates oils well at high temperatures.

Uploaded by

Nibaldo Kamel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STATERMIC XHT

Grease

Synthetic grease with Fluor compounds.

APPLICATIONS
 Special grease formulated with fluorinated components for use in applications
working under high temperatures and medium to heavy loads.

SPECIFICATIONS
 ISO 6743-9: L-XBGDB-2
 DIN 51502: KFKP2U-25

ADVANTAGES
 STATERMIC XHT has been formulated with synthetic components which reduce the
friction coefficient of most plastic and metal materials.
 The rheology of the structure has been adapted in such a way to obtain a extended
application at temperatures up to 250 °C with peak temperatures up to 270 °C. The
starting torque at - 25 °C is very low.
 The stability of the chemical structure of the components ensure a compatibility with
most of the plastic and metal materials used in the industry (except fluorinated
components).
 The very high cohesion of the structure, its excellent resistance to temperature and
chemical products, its low volatility contributes to a very long life time of the
STATERMIC XHT.

TYPICAL CHARACTERISTICS METHODS UNITS STATERMIC XHT


Color / appearance White/Homogeneous
2
Base oil viscosity at 40 °C ASTM D 445 mm /s 147
Worked penetration W 60 at 25°C ASTM D 217 mm/10 265 - 295
Worked penetration 100.000 strokes ASTM D 217 change < 15
Dropping point NF T 60 102 °C > 300
Oil seperation 149°C/30 Hrs. FTMS 791 - 321 % <6
Evaporation 149 °C/22 hrs./120 l/hr air ASTM D 972 % < 0.4
Four ball weld load ASTM D 2596 daN 800
Operating temperature range °C - 25 to 250
Above characteristics are mean values given as an information.

TOTAL LUBRIFIANTS
Industrie & Spécialités
23-06-2010 (supersedes 19-07-2001)
STATERMIC XHT
1/1

This lubricant used as recommended and for the application for which it has been designed does not present any particular risk.
A material safety data sheet conforming to the regulations in use in the E.C. is obtainable via your commercial adviser www.quick-fds.com.

You might also like