Application System/400 SX41-3732-00

System/36-AS/400
Command Cross-Reference

Version 3
Application System/400 SX41-3732-00

System/36-AS/400
Command Cross-Reference

Version 3

IBM
| First Edition (September 1994)

| This edition applies to the licensed program IBM Operating

| System/400, (Program 5763-SS1), Version 3 Release 1
| Modification 0, and to all subsequent releases and modifi-
| cations until otherwise indicated in new editions. Make
| sure you are using the proper edition for the level of the
| product. Changes or additions to the text are indicated by
| a vertical line (|) to the left of the change or addition.

| The following terms, denoted by an asterisk (*) in this pub-

| lication, are trademarks of the IBM Corporation in the
| United States or other countries or both: Application
| System/400, APPN, AS/400, C/400, DisplayWrite,
| FORTRAN/400, IBM, OfficeVision, OfficeVision/400, Oper-
| ating System/400, OS/400, PROFS, RPG/400, and 400.
| The following terms, denoted by a double asterisk (**) in
| this publication, are trademarks of other companies:
| RM/COBOL-85 - Ryan McFarland Corporation.

| This publication could contain technical inaccuracies or

| typographical errors. This publication may refer to pro-
| ducts that are announced but not currently available in
| your country. This publication may also refer to products
| that have not been announced in your country. IBM
| makes no commitment to make available any unan-
| nounced products referred to herein. The final decision to
| announce any product is based on IBM's business and
| technical judgment. A form for reader comments is pro-
| vided at the back of this publication. If the form has been
| removed, you can mail your comments to: Attn Depart-
| ment 245; IBM Corporation; 3605 Highway 52 N;
| Rochester, MN 55901-9986 USA. Or you can fax your
| comments to:

| United States and Canada: 800+937-3430

| Other countries: (+1)+507+253-5192
| If you have access to Internet, you can send your com-
| ments electronically to [email protected];
| IBMMAIL, to ibmmail(usib56rz).

|  Copyright International Business Machines Corpo-

| ration 1994. All rights reserved.
| Note to U.S. Government Users — Documentation related
| to restricted rights — Use, duplication or disclosure is
| subject to restrictions set forth in GSA ADP Schedule Con-
| tract with IBM Corp.
Contents
Introduction . . . . . . . . . . . . . . . . . . 1
Displaying AS/400 Commands Online . . . . . 1

System/36 Commands to AS/400 Commands

Cross-Reference . . . . . . . . . . . . . . . 3
System/36 Procedures to AS/400 Commands
Cross-Reference . . . . . . . . . . . . . . . 3
System/36 Control Commands to AS/400
Commands Cross-Reference . . . . . . . . . 39
System/36 OCL Statements to AS/400
Commands Cross-Reference . . . . . . . . . 47

Appendix. AS/400 Control Language

Commands . . . . . . . . . . . . . . . . . . 53

 Copyright IBM Corp. 1994 iii

iv AS/400 System/36-AS/400 Command Cross-
Reference
Introduction
This book is designed as a cross-reference to help
users who are familiar with System/36 system func-
tion to determine which AS/400 control language
(CL) command performs the same (or similar) func-
tion.

Only those commands with equivalent System/36

function appear in the cross-reference listing. Some
AS/400 commands provide new function not avail-
able on the System/36. A complete list of AS/400
commands is contained in Appendix, “AS/400
Control Language Commands” on page 53.
Detailed information about the function of AS/400
commands is available in the CL Reference.

Displaying AS/400 Commands Online

To display a specific command, type the command
name on the command line and press F4 to see the
command prompt for parameters.

There are several ways to display lists of com-

mands:
Ÿ Press F4 on a blank command line to see the
Major Command Groups menu. The Major
Command Groups menu lists commands in
general groups. For example, a group may
consist of commands grouped by subject
matter, by the action performed, or alphabet-
ically by name.
Ÿ Type GO CMDxxx on the command line and
press Enter to display a menu of commands
relating to xxx. There are many CMDxxx menus
on the AS/400 system.
– xxx may be the verb part of the command.
For example, type GO CMDCRT on the

 Copyright IBM Corp. 1994 1

 command line and press Enter to display a
menu of all create (CRT) commands.
– xxx may also be the noun part of the
command. For example, type GO CMDLIB
on the command line and press Enter to
display a menu showing all library com-
mands.
Ÿ Select Command (SLTCMD) displays a menu of
related commands. For example, type
SLTCMD xxx\ on the command line and press
Enter to display a menu of commands relating
to xxx. In this example, xxx is the verb part of
the command. For example, SLTCMD CRT\ dis-
plays all Create (CRT) commands. SLTCMD DL\
displays all commands beginning with DL.

To display online help for a CL command, press the

Help key. Online help for a command can also be
displayed by pressing F11 in any help display.
Type the command name on the Search Help Index
display screen and press Enter. The help informa-
tion can then be displayed or printed.

2 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 Commands to AS/400

Commands Cross-Reference
System/36 procedures, control commands, and OCL
statements are listed alphabetically, with cross-
references to AS/400* commands, beginning on the
following pages:
System/36 procedures Page 3
System/36 control commands Page 39
System/36 OCL statements Page 47

System/36 Procedures to AS/400

Commands Cross-Reference
The first column lists the System/36 commands in
alphabetic order. The second column lists the
AS/400 commands with the same (or similar) func-
tion followed by a brief description of the AS/400
function.
System/36 AS/400 AS/400 Function
#STRTUP1 ADDAJE Adds an autostart job entry to
an existing subsystem
description
WRKSBSD Allows you to work with a list
of subsystem descriptions
#STRTUP2 ADDAJE Adds an autostart job entry to
an existing subsystem
description
WRKSBSD Allows you to work with a list
of subsystem descriptions
ALERT CHGMSGD Changes an existing message
description stored in a speci-
fied message file
ALOCFLDR RGZDLO Allows a user to reorganize
document library objects
ALOCLIBR None Function not supported or no
longer required on the AS/400
system

 Copyright IBM Corp. 1994 3

 PROCEDURES

System/36 AS/400 AS/400 Function

ALTERCOM GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
APAR CRTAPAR Records data on tape,
diskette, or a save file on disk
to submit with an authorized
program analysis report
(APAR)
APPNINFO DSPAPPNINF Displays or prints APPN*
network information
ARCHIVE SAVDLO Saves the specified docu-
ments or folders to tape,
diskette, or a save file on disk
ASM None Function not supported or no
longer required on the AS/400
system
AUTOC CRTRPTPGM Creates (compiles) RPG with
automatic report specifications
BALPRINT None Function not supported or no
longer required on the AS/400
system
BASIC STRBAS Starts a BASIC session
BASICP STRBASPRC Starts running a BASIC proce-
dure saved as a source file
member
BASICR CALL Calls a specified program and
passes control to it
BASICS CRTBASPGM Creates (compiles) a BASIC
program
BGUATTR STRBGU Starts the Business Graphics
Utility (BGU) licensed program
BGUCHART DSPCHT Displays an existing chart
defined by the Business
Graphics Utility (BGU) licensed
program
DSPGDF Displays, prints, or plots a
graphics data file
STRBGU Starts the Business Graphics
Utility (BGU) licensed program

4 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

BGUDATA STRBGU Starts the Business Graphics
Utility (BGU) licensed program
BGUGRAPH DSPGDF Displays, prints, or plots a
graphics data file
DSPCHT Displays an existing chart
defined by the Business
Graphics Utility (BGU) licensed
program
STRBGU Starts the Business Graphics
Utility (BGU) licensed program
BLDFILE CRTPF Creates a physical file
BLDGRAPH CRTGDF Creates a graphics data file
from a chart format and a data
file
STRBGU Starts the Business Graphics
Utility (BGU) licensed program
BLDINDEX CRTLF Creates a logical file
BLDLIBR CRTLIB Creates a user library
CRTSRCPF Creates a database file to
contain source statements
BLDMENU CRTMNU Creates either a display file or
program menu
CRTMSGFMNU Creates a menu from specified
message files
CRTS36MNU Creates a menu (display file
and command message file)
from the user's source
members
BUILD None Function not supported or no
longer required on the AS/400
system
CACHE None Function not supported or no
longer required on the AS/400
system
CATALOG DSPDKT Displays the volume label and
the data file identifier on a
diskette
DSPFD Displays the information
retrieved from a file description
of a database

AS/400 Command Cross-Reference 5

 PROCEDURES

System/36 AS/400 AS/400 Function

DSPFFD Displays or prints field-level
information for one or more
files in one library or all
libraries that the user can
access
DSPFLR Displays or prints a list of
folders and documents, or
creates a database file con-
taining the list
DSPLIB Displays the contents of one
or more libraries
DSPOBJD Displays the names and attri-
butes of specified objects in a
specified library
DSPTAP Displays the volume label and
data file label information on a
tape
CGU STRCGU Starts the Character Generator
Utility (CGU) function
CHGXLATE None Function not supported or no
longer required on the AS/400
system
CHNGEMEM RNMOBJ Renames a specified object
name and object type
RNMM Renames a specified file
member
CNFIGICF GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
CNFIGSSP CRTDEVxxxx Creates a device description
where xxxx is the device class
or type
CHGDEVxxxx Changes a device description
where xxxx is the device class
or type
CFGRPDS Configures the RSCS/PROFS*
bridge application
CHGCTLxxxx Changes a controller
description where xxxx is the
controller class or type

6 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

CHGLINxxxx Changes a line description
where xxxx is the line class or
type
CHGPRTF Changes one or more of the
characteristics of the specified
printer device files
CRTCTLxxxx Creates a controller
description where xxxx is the
controller class or type
CRTLINxxxx Creates a line description
where xxxx is the line class or
type
CRTPRTF Creates a printer device file
DLTDEVD Deletes a device description
DLTLIND Deletes a line description
GO Shows the Work with Licensed
LICPGM Program display
CNFIGX25 GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
COBOLC CRTCBLPGM Creates (compiles) a COBOL
program
CRTRMCPGM Allows a user to compile an
RM/COBOL-85** source
program into an program that
can be run in the AS/400 envi-
ronment
COBOLONL STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
COBOLP STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
COBSDA STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options

AS/400 Command Cross-Reference 7

PROCEDURES

System/36 AS/400 AS/400 Function

STRSDA Starts the screen design aid
main menu and allows users
to create or change a display
format interactively
COBSEU STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRSEU Calls the source entry utility
(SEU) program and displays
the main menu
COMPRESS None Function not supported or no
longer required on the AS/400
system
CONDENSE None Function not supported or no
longer required on the AS/400
system (use RGZDLO to con-
dense a folder)
COPYDATA CPYF Copies all or part of a file from
the database or external
device to the database or
another external device
CRTDUPOBJ Copies one or a group of
objects from one library to
another
RGZPFM Reorganizes a physical file
member
COPYDIAG DUPDKT Duplicates the contents from
one diskette onto one or more
other diskettes
COPYI1 DUPDKT Duplicates the contents from
one diskette onto one or more
other diskettes
COPYPRT CPYSPLF Copies data records in a spec-
ified spooled output file to a
user-defined physical database
file
DSPSPLF Displays the contents of a
specified spooled file
CREATE ADDMSGD Describes a message and
stores it in a specified
message file

8 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

CRTMSGF Creates a user-defined
message file
CRTS36MSGF Creates a message file from
the user's System/36 message
source member
DATE CHGJOB Changes the attributes of a job
DEFINEID GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
DEFINEPN GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
DEFINLOC GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
DEFINX21 GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
DEFINX25 GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
DEFSUBD CRTFLR Creates a folder
DLTDLO Deletes one or all documents
or folders
DELETE DLTDKTLBL Deletes a data file identifier
from a diskette
DLTDLO Deletes one or all documents
or folders
DLTDTADCT Deletes a data dictionary
DLTF Deletes a specified database
or device files

AS/400 Command Cross-Reference 9

PROCEDURES

System/36 AS/400 AS/400 Function

DLTLIB Deletes a specified library after
all objects in the library are
deleted or moved
WRKOBJ Allows a user to work with
objects
DELNRD WRKDDMF Displays a list of DDM files,
which allows you to change,
delete, create, and do other
work with DDM files
DFA DMPCLPGM Dumps all variables declared
in a CL program and all mes-
sages in the program's
message queue to a spooled
printer file
DMPDLO Dumps the contents and/or
attributes, or both, of folders,
documents, or internal docu-
ment library system objects to
a printer file
DMPJOB Dumps the basic data struc-
tures or specific calls of the
current job or the job being
serviced
DMPJOBINT Dumps the machine internal
data related to the current job
DMPOBJ Dumps the contents and/or
attributes of a specified object
stored in a library to a spooled
printer file
DMPSYSOBJ Dumps the contents, attri-
butes, or both, of any object, a
generic group of objects, or all
objects to a spooled printer file
DMPTAP Dumps label information, data
blocks, or both, from labeled
or unlabeled tapes to a
spooled printer file
DMPTRC Dumps the performance data
from the trace table to a data-
base file
PRTINTDTA Prints the dump file copied
from DMPJOBINT command

10 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

STRSST Starts system service tools by
showing the System Service
Tools main menu
DFU STRDFU Starts the Data File Utility
(DFU) program
STRPGMMNU Starts the programmer menu
DISABLE VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
DOCCNV None Function not supported or no
longer required on the AS/400
system
DSU STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRPGMMNU Starts the programmer menu
STRSEU Calls the source entry utility
(SEU) program and displays
the main menu
WRKMBRPDM Allows you to work with lists of
members
DUMP DMPCLPGM Dumps all variables declared
in a CL program and all mes-
sages in the program's
message queue to a spooled
printer file
DMPDLO Dumps the contents and/or
attributes, or both, of folders,
documents, or internal docu-
ment library system objects to
a printer file
DMPJOB Dumps the basic data struc-
tures or specific calls of the
current job or the job being
serviced
DMPJOBINT Dumps the machine internal
data related to the current job
DMPOBJ Dumps the contents and/or
attributes of a specified object
stored in a library to a spooled
printer file

AS/400 Command Cross-Reference 11

PROCEDURES

System/36 AS/400 AS/400 Function

DMPSYSOBJ Dumps the contents, attri-
butes, or both, of any object, a
generic group of objects, or all
objects to a spooled printer file
DMPTAP Dumps label information, data
blocks, or both, from labeled
or unlabeled tapes to a
spooled printer file
DMPTRC Dumps the performance data
from the trace table to a data-
base file
PRTINTDTA Prints the dump file copied
from DMPJOBINT command
STRSST Starts system service tools by
showing the System Service
Tools main menu
EDITNRD CHGDDMF Changes one or more of the
values in the specified DDM
file
CRTDDMF Creates a distributed data
management file to define a
remote file to the local system
RNMOBJ Renames a specified object
name and object type
EM3270 ENDPRTEML Ends printer emulation without
ending the job
STREML3270 Starts a 3270 device emulation
session
STRPRTEML Starts 3270 printer emulation
ENABLE VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
ENTER STRDFU Starts the Data File Utility
(DFU) program
CHGDTA Changes, adds, or deletes
records in an existing data-
base file
EPDOWNL STREML3270 Starts a 3270 device emulation
session

12 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

EPLMRG None Function not supported or no
longer required on the AS/400
system
EP3270 STREML3270 Starts a 3270 device emulation
session
ERAP STRSST Starts system service tools by
showing the System Service
Tools main menu
ERR SNDBRKMSG Sends a message to one or
more work station message
queues
SNDPGMMSG Sends a message from a
program to a user, system
operator, user profile message
queue, or all active users
SNDUSRMSG Sends a message from a
program to a message queue
and receives a reply
ES3270 STREML3270 Starts a 3270 device emulation
session
STRPRTEML Starts 3270 printer emulation
FORMAT CRTDSPF Creates a device file to define
a display station to the system
CHGDSPF Changes (in the file
description) one or more of the
attributes of the specified
display device file
CRTS36DSPF Creates a display file from
System/36 SFGR source
FLIB ADDLIBLE Adds a library name to the
library list
CHGCURLIB Changes the current library
entry of the library list
FORTGO CALL Calls a specified program and
passes control to it
FORTONL STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options

AS/400 Command Cross-Reference 13

PROCEDURES

System/36 AS/400 AS/400 Function

FORTP STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
FORTRANC CRTFTNPGM Compiles a FORTRAN/400*
source program into an object
program
FORTSDA STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRSDA Starts the screen design aid
main menu and allows users
to create or change a display
format interactively
FORTSEU STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRSEU Calls the source entry utility
(SEU) program and displays
the main menu
FROMLIBR CPYF Copies all or part of a file from
the database or external
device to the database or
another external device
CPYTODKT Copies a database or device
file to diskette
CPYTOTAP Copies records to a tape file
from a physical, logical, or
spooled inline file, from tape,
or from diskette in a specified
block format
SAVOBJ Saves objects located in the
same library to tape, diskette,
or a save file on disk
SAVS36LIBM Saves a copy of source file
members on diskette or tape
HELP Replaced Replaced by online help infor-
mation for commands

14 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

HISTORY DSPJOBLOG Displays commands and
related job messages
DSPLOG Displays the contents of the
history log
GO Displays a menu of commands
CMDLOG relating to logs
ICFDEBUG TRCICF Traces all ICF functions that
occur within the job that
entered the command
ICVERIFY None Function not supported or no
longer required on the AS/400
system
IDDU STRIDD Starts IDDU
WRKDTADCT Allows a user to work with the
contents of a data dictionary
IDDUDCT CRTDTADCT Creates a data dictionary
WRKDTADCT Allows a user to work with the
contents of a data dictionary
IDDUDFN STRIDD Starts IDDU
DSPDTADCT Displays or prints the contents
of a field, record format, or file
definition
DSPDBR Displays or prints relational
information about database
files, record formats, and
libraries
DSPFFD Displays or prints field-level
information for one or more
files in one library or all
libraries that the user can
access
WRKDTADFN Allows a user to work with
data definitions
IDDUDISK CRTPF Creates a physical file
STRDFU Starts the Data File Utility
(DFU) program
WRKDBFIDD Shows the IDDU Work with
Database Files display where
you can select an option to
create physical files or enter
data into a file
IDDULINK STRIDD Starts IDDU

AS/400 Command Cross-Reference 15

PROCEDURES

System/36 AS/400 AS/400 Function

LNKDTADFN Links or unlinks file definitions
in a dictionary and program-
described files
IDDUPRT STRIDD Starts IDDU
DSPFFD Displays or prints field-level
information for one or more
files in one library or all
libraries that the user can
access
DSPDBR Displays or prints relational
information about database
files, record formats, and
libraries
DSPDTADCT Displays or prints the contents
of a field, record format, or file
definition
IDDURBLD None Function not supported or no
longer required on the AS/400
system
IDDUXLAT None Function not supported or no
longer required on the AS/400
system
INIT CLRDKT Clears all files from a diskette
INZDKT Initializes identification infor-
mation and sets the format on
a diskette
RNMDKT Changes the volume identifier
of a diskette or changes the
name of its owner
INITDIAG INZDKT Initializes identification infor-
mation and sets the format on
a diskette
INIT9332 None Function not supported or no
longer required on the AS/400
system
INQUIRY DSPDTA Displays the contents of a
database physical file under
control of a DFU program
STRDFU Starts the Data File Utility
(DFU) program
IPL PWRDWNSYS Powers down the system

16 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

ITF STRITF Starts sending and receiving
data through different applica-
tions
JOBSTR CPYF Copies all or part of a file from
the database or external
device to the database or
another external device
RSTS36LIBM Reads a file containing library
members, creates database
source or data file members
on the AS/400 system, and
copies the member data from
the file into each restored
member
SBMJOB Allows a job that is running to
submit another job to a job
queue to be run later as a
batch job
CPYFRMDKT Copies one or more files from
diskette to an output file or to
a printer
KEYS GO Displays a menu of commands
CMDKBD relating to keyboards
KEYSORT None Function not supported or no
longer required on the AS/400
system
LIBRLIBR CPYLIB Copies a library and all of its
objects to another library
CRTDUPOBJ Copies one or a group of
objects from one library to
another
CRTSRCPF Creates a database file to
contain source statements
LINES OVRPRTF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
LIST GO Displays a menu of commands
CMDQRY relating to queries
LISTDATA CPYF Copies all or part of a file from
the database or external
device to the database or
another external device

AS/400 Command Cross-Reference 17

PROCEDURES

System/36 AS/400 AS/400 Function

CPYFRMDKT Copies one or more files from
diskette to an output file or to
a printer
CPYFRMTAP Copies records from a tape file
to a physical file, diskette,
tape, or program-described
printer file
CPYSRCF Copies a database source file
to a physical source file
DSPPFM Displays a physical database
file member
LISTFILE CPYF Copies all or part of a file from
the database or external
device to the database or
another external device
CPYFRMDKT Copies one or more files from
diskette to an output file or to
a printer
CPYFRMTAP Copies records from a tape file
to a physical file, diskette,
tape, or program-described
printer file
CPYSRCF Copies records from a tape file
to a physical file, diskette,
tape, or program-described
printer file
DMPTAP Dumps label information, data
blocks, or both, from labeled
or unlabeled tapes to a
spooled printer file
DSPDKT Displays the volume label and
the data file identifier on a
diskette
DSPTAP Displays the volume label and
data file label information on a
tape
LISTLIBR CPYF Copies all or part of a file from
the database or external
device to the database or
another external device
DSPLIB Displays the contents of one
or more libraries

18 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

DSPOBJD Displays the names and attri-
butes of specified objects in a
specified library
STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
LISTNRD DSPDDMF Displays or prints detailed
information about the specified
DDM file
WRKDDMF Displays a list of DDM files,
which allows you to change,
delete, create, and do other
work with DDM files
LOG CHGJOB Changes the attributes of a job
CHGSYSVAL Changes the current value of
the specified system value
CHGJOBD Changes the attributes speci-
fied for a job description object
MAINTX25 None Function not supported or no
longer required on the AS/400
system
MCSCONV None Function not supported or no
longer required on the AS/400
system
MOVEFLDR None Function not supported or no
longer required on the AS/400
system
MSGFILE CRTMSGQ Creates a user-defined
message queue
DLTMSGQ Deletes the specified message
queue
DSPMSG Displays messages received at
the specified message queue
GO Displays a menu of commands
CMDMSG relating to messages
RMVMSG Removes the specified
message or group of mes-
sages from the specified
message queue
MSRJE ENDRJESSN Ends a remote job entry
session for a specified session

AS/400 Command Cross-Reference 19

PROCEDURES

System/36 AS/400 AS/400 Function

GO Displays a menu of commands
CMDRJE relating to remote job entry
SBMRJEJOB Submits a remote job entry
input stream to the host
system as a batch job
STRRJESSN Starts a remote job entry
session for a specified session
WRKRJESSN Allows a user to work with
information about an active
remote job entry (RJE) session
NOHALT ADDMSGD Describes a message and
stores it in a specified
message file
CHGMSGD Changes an existing message
description stored in a speci-
fied message file
CHGRPYLE Changes the message ID,
comparison data, message, or
dump attributes of the reply
DSPMSG Displays messages received at
the specified message queue
DSPMSGD Displays detailed information
about messages in a message
file
MONMSG Monitors the messages sent to
the program message queue
WRKRPYLE Allows a user to work with
reply entries currently in the
system message reply list
OFCBPRT STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCCAL STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCCANCL ENDSBS Ends the processing in a spec-
ified subsystem or all subsys-
tems
OFCCOMM None Function not supported or no
longer required on the AS/400
system

20 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

CFGDSTSRV Changes the configuration of
the distribution network
OFCDATA SAVOBJ Saves objects located in the
same library to tape, diskette,
or a save file on disk
SAVLIB Saves libraries to tape,
diskette, or a save file on disk
SAVDLO Saves the specified docu-
ments or folders to tape,
diskette, or a save file on disk
RGZPFM Reorganizes a physical file
member
OFCDFLT STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCDIR WRKDIR Allows user to work interac-
tively with a set of displays to
view, add, change, and
remove entries in the system
directory
OFCFILE WRKDOC Allows a user to work with the
word processing function
OFCGRP WRKDSTL Allows a user to work with dis-
tribution lists
OFCINSTL RSTLICPGM Restores an IBM licensed
program from tape for initial
installation or new release
installation
OFCLDF STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCMAIL STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCMAINT CFGDSTSRV Changes the configuration of
the distribution network
OFCMSG SNDMSG Sends a message from one
user to one or more message
queues
STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively

AS/400 Command Cross-Reference 21

PROCEDURES

System/36 AS/400 AS/400 Function

OFCQ WRKDSTQ Allows the user to work with
distribution requests on the
distribution queues
WRKDOCPRTQ Allows the user to work with
the word processing function
OFCSRCH STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCSTAT STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OFCUSER STROFC Starts OfficeVision/400* which
allows the user to do office
functions interactively
OLINK None Function not supported or no
longer required on the AS/400
system
ORGANIZE CPYF Copies all or part of a file from
the database or external
device to the database or
another external device
RGZPFM Reorganizes a physical file
member
PASSTHRU STRPASTHR Starts a pass-through session
and allows the user to sign on
a remote system as if the user
were locally attached
PASSWORD CHGDSTPWD Changes the password
shipped with the system for
the security officer user profile
(QSECOFR)
CHGPRF Changes the values of a user's
profile
CHGPWD Changes a user's password
CHGUSRPRF Changes the values specified
in a user profile
PATCH DMPOBJ Dumps the contents and/or
attributes of a specified object
stored in a library to a spooled
printer file

22 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

DMPSYSOBJ Dumps the contents, attri-
butes, or both, of any object, a
generic group of objects, or all
objects to a spooled printer file
STRSST Starts system service tools by
showing the System Service
Tools main menu
PCEXCH None Function not supported or no
longer required on the AS/400
system
PCEXEC STRPCCMD Starts a single PC application
or DOS command on the per-
sonal computer
PCOPROF CHGPCOPRF Allows you to specify if you
want to use DisplayWrite* 4 or
OfficeVision/400* as your text
editor
MENU GO Shows the AS/400 PC Support
PCOMNU PCOMNU Organizer display
PCU CVTTOFLR Converts a virtual disk into a
folder and PC documents
CPYFRMPCD Copies the data from a PC
document into a physical data-
base file on the AS/400
system
CPYTOPCD Copies the contents of a
member from a physical data-
base file on the AS/400
system to a PC document in a
folder
POST GO Displays a menu of commands
CMDCPY relating to copying
PRINT CHGDEVxxxx Changes a device description
where xxxx is the device class
or type
CHGJOB Changes the attributes of a job
CHGUSRPRF Changes the values specified
in a user profile
CRTPRTF Creates a printer device file

AS/400 Command Cross-Reference 23

PROCEDURES

System/36 AS/400 AS/400 Function

OVRPRTF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
PRINTKEY CHGDEVxxxx Changes a device description
where xxxx is the device class
or type
CHGUSRPRF Changes the values specified
in a user profile
CHGJOB Changes the attributes of a job
PROBLEM ANZPRB Shows the Analyze Problems
menu, and allows the user to
analyze or report problems not
detected by the system
DSPPRB Displays or prints service-
related information for hard-
ware or programming
WRKPRB Allows a user to work with the
problems that were detected
by the system or by the user
PRTGRAPH DSPGDF Displays, prints, or plots a
graphics data file
STRBGU Starts the Business Graphics
Utility (BGU) licensed program
PTF APYPTF Applies PTFs to a specified
licensed program
DSPPTF Displays or prints the program
temporary fixes for a specified
licensed program
LODPTF Loads program temporary
fixes for a specified licensed
program from the service
support system, tape, diskette,
or a save file on disk
RMVPTF Removes a program tempo-
rary fix from a specified
licensed program
QRY GO Displays a menu of commands
CMDQRY relating to queries
STRQRY Starts the Query function by
showing the Query main menu

24 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

WRKQRY Allows you to work with a
query definition and to run a
query
QRYDE STRDFU Starts the Data File Utility
(DFU) program
STRQRY Starts the Query function by
showing the Query main menu
UPDDTA Creates and runs a temporary
data file utility (DFU) program,
which allows you to update a
database file
QRYRUN RUNQRY Runs an existing query or a
default query if only the file
name is specified
STRQRY Starts the Query function by
showing the Query main menu
WRKQRY Allows you to work with a
query definition and to run a
query
READINFO DSPDOC Allows the user to display a
document using the word pro-
cessing function of the
OfficeVision/400 program
REMOVE DLTF Deletes a specified database
or device files
DLTMSGF Deletes the specified message
file including message
descriptions stored in the file
DLTPGM Deletes a compiled program or
group of programs
RMVM Removes the specified
member from a specified phys-
ical or logical file
RENAME RNMDLO Changes the name of a docu-
ment or folder
RNMOBJ Renames a specified object
name and object type
CLRMSGQ Clears all messages from a
specified message queue
REQUESTX None Function not supported or no
longer required on the AS/400
system

AS/400 Command Cross-Reference 25

PROCEDURES

System/36 AS/400 AS/400 Function

RESPONSE ADDMSGD Describes a message and
stores it in a specified
message file
ADDRPYLE Adds a message entry to the
system-wide automatic
message reply list
CHGMSGD Changes an existing message
description stored in a speci-
fied message file
CHGRPYLE Changes the message ID,
comparison data, message, or
dump attributes of the reply
MONMSG Monitors the messages sent to
the program message queue
RMVMSGD Removes a message
description from a specified
message file
WRKRPYLE Allows a user to work with
reply entries currently in the
system message reply list
RESTEXTN CPYIGCTBL Copies part or all of a double-
byte character set font table
from system storage to tape or
diskette, or from tape or
diskette into system storage
RESTFLDR RSTDLO Restores filed documents, dis-
tribution documents, and
folders from tape, diskette, or
a save file on disk
RSTLIB Restores user libraries saved
to tape, diskette, or a save file
on disk
RESTLIBR RSTLIB Restores user libraries saved
to tape, diskette, or a save file
on disk
RSTS36LIBM Reads a file containing library
members, creates database
source or data file members
on the AS/400 system, and
copies the member data from
the file into each restored
member

26 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

RESTNRD RSTLIB Restores user libraries saved
to tape, diskette, or a save file
on disk
RSTOBJ Restores objects to a single
library saved from tape,
diskette, or a save file on disk
RESTORE RSTOBJ Restores objects to a single
library saved from tape,
diskette, or a save file on disk
RSTS36F Reads a file, (optionally)
creates a database physical or
logical file (if it does not
already exist), and copies any
data into the file
RETRIEVE RSTDLO Restores filed documents, dis-
tribution documents, and
folders from tape, diskette, or
a save file on disk
RJFILE CVTRJEDTA Converts compressed AS/400
system database files to
decompressed database files
written either to another data-
base or to AS/400 system
printer device files
STRRJERDR Starts reading a remote job
entry (RJE) file
RJTABLE ADDFCTE Adds a forms entry to an
existing forms control table
CRTFCT Creates a forms control table
with no entries
CRTFORMDF Creates a form definition from
a physical file
ROLLKEYS CHGPRF Changes the values of a user's
profile
CHGUSRPRF Changes the values specified
in a user profile
SETKBDMAP Sets new key assignments for
the Program Attention (PA)
and Program Function (PF)
keys
RPGC CRTRPGPGM Creates (compiles) an auto
report RPG program
RPGONL STRPGMMNU Starts the programmer menu

AS/400 Command Cross-Reference 27

PROCEDURES

System/36 AS/400 AS/400 Function

STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
RPGP STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRPGMMNU Starts the programmer menu
RPGR STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
RPGSDA STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRSDA Starts the screen design aid
main menu and allows users
to create or change a display
format interactively
RPGSEU STRPDM Calls the Programming Devel-
opment Manager (PDM) utility,
which allows you to work with
libraries, objects, members,
and user-defined options
STRSEU Calls the source entry utility
(SEU) program and displays
the main menu
RPGX CRTRPGPGM Creates (compiles) an auto
report RPG program
SAVE SAVOBJ Saves objects located in the
same library to tape, diskette,
or a save file on disk
SAVSTG Saves the licensed internal
code and the contents of auxil-
iary storage to tape

28 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

SAVS36F Creates a copy of a database
physical or logical file to
diskette or tape magnetic
media that can be restored on
a System/36 or to a physical
file that can be sent to a
System/36
SAVEEXTN CPYIGCTBL Copies part or all of a double-
byte character set font table
from system storage to tape or
diskette, or from tape or
diskette into system storage
SAVEFLDR SAVDLO Saves the specified docu-
ments or folders to tape,
diskette, or a save file on disk
SAVLIB Saves libraries to tape,
diskette, or a save file on disk
SAVSECDTA Saves all security information
to tape, diskette, or save file
on disk
SAVELIBR SAVLIB Saves libraries to tape,
diskette, or a save file on disk
SAVS36LIBM Saves a copy of source file
members on diskette or tape
SAVENRD SAVCHGOBJ Saves a changed object or
group of objects located in the
same library to tape, diskette,
or a save file on disk
SAVLIB Saves libraries to tape,
diskette, or a save file on disk
SAVOBJ Saves objects located in the
same library to tape, diskette,
or a save file on disk
SAVSTG Saves the licensed internal
code and the contents of auxil-
iary storage to tape
SDA STRSDA Starts the screen design aid
main menu and allows users
to create or change a display
format interactively
SECDEF CHGSYSVAL Changes the current value of
the specified system value
SECEDIT CHGAUTLE Changes user's authority or an
authorization list

AS/400 Command Cross-Reference 29

PROCEDURES

System/36 AS/400 AS/400 Function

CHGCFGL Changes a configuration list
CHGDLOAUT Changes the authority to a
document or folder
CHGDLOOWN Changes ownership of a docu-
ment or folder from one user
to another
CHGDSTPWD Changes the Dedicated
Service Tools (DST) password
CHGOBJOWN Transfers ownership of an
object from one user to
another
CHGPRF Changes the values of a user's
profile
CHGPWD Changes a user's password
CHGUSRPRF Changes the values specified
in a user profile
CHKPWD Checks the password associ-
ated with a user's profile
CRTCFGL Creates a list of remote
location names and remote
location identifiers for the
specified communications type
CRTUSRPRF Creates a user profile to
describe a user to the system
DLTAUTHLR Deletes an authority holder for
an associated resource
DLTCFGL Deletes a list of remote
location names and remote
location identifiers for the
specified communications type
DLTUSRPRF Deletes an individual user
profile or a group profile from
the system
DSPDLOAUT Displays a list of users and
their authorities assigned to a
specified document or folder
GRTOBJAUT Grants specific authority for a
named object, a generic group
of objects, or all objects
RMVAUTLE Removes a user from an
authorization list

30 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

RMVDLOAUT Removes a user's specific
authority to a document or
folder
RTVUSRPRF Retrieves values stored and
associated with a user and
uses those values in a CL
program
RTVAUTLE Retrieves the authorities that a
user has on an authorization
list
RVKOBJAUT Deletes specific authorities to
an object for a user
RVKUSRPMN Revokes the permission from
a user to handle documents
and folders for another user
WRKOBJOWN Allows a user to work with a
list of objects owned by a
specified user profile
WRKUSRPRF Allows a user to work with a
description of an existing user
profile
SECLIST CHGCFGL Changes a configuration list
CHGDEVxxxx Changes a device description
where xxxx is the device class
or type
CRTCFGL Creates a list of remote
location names and remote
location identifiers for the
specified communications type
CRTDEVxxxx Creates a device description
where xxxx is the device class
or type
DSPAUTHLR Displays all authority holders
on the system
DSPAUTLDLO Displays a list of documents
and folders whose security is
specified on the specified
authorization list
DSPAUTUSR Displays a list of users and
information about those users
who are authorized to use the
system

AS/400 Command Cross-Reference 31

PROCEDURES

System/36 AS/400 AS/400 Function

DSPDLOAUT Displays a list of users and
their authorities assigned to a
specified document or folder
DSPOBJAUT Displays a list of users
assigned to an object
DSPPGMADP Displays a list of programs that
use the authority of a specified
(owner) user profile or group
profile
DSPSYSVAL Displays the name and value
of a specified system value
DSPUSRPRF Displays the user profile infor-
mation
SECREST RSTAUT Restores authorities that were
specifically assigned to a user
profile
RSTUSRPRF Restores the basic parts of a
user profile or a set of user
profiles
SECSAVE SAVSECDTA Saves all security information
to tape, diskette, or save file
on disk
SAVSTG Saves the licensed internal
code and the contents of auxil-
iary storage to tape
SAVSYS Saves the licensed internal
code and QSYS library
SERVICE ANZPRB Shows the Analyze Problems
menu, and allows the user to
analyze or report problems not
detected by the system
STRSST Starts system service tools by
showing the System Service
Tools main menu
SERVLOG ANZPRB Shows the Analyze Problems
menu, and allows the user to
analyze or report problems not
detected by the system
WRKPRB Allows a user to work with the
problems that were detected
by the system or by the user

32 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

SET CHGDEVxxxx Changes a device description
where xxxx is the device class
or type
CHGJOB Changes the attributes of a job
OVRPRTF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
SETALERT CHGMSGD Changes an existing message
description stored in a speci-
fied message file
SETCOMM GO Shows the Configure Commu-
CFGCMN nications display (more
command mapping information
| can be found in the System/36
| Migration book)
SETDUMP ADDBKP Adds breakpoints in a program
being debugged
GO Displays a menu of commands
CMDDBG relating to debugging
GO Displays a menu of commands
CMDBKP relating to breakpoints
RMVBKP Removes one or more break-
points from the program being
debugged
STRCBLDBG Starts the debugging state-
ments from a COBOL program
STRDBG Starts a job in debug mode
SEU STRSEU Calls the source entry utility
(SEU) program and displays
the main menu
SLIB ADDLIBLE Adds a library name to the
library list
CHGCURLIB Changes the current library
entry of the library list
SMF STRPFRT Starts the Performance Tools
licensed program main menu
SMFDATA DSPPFRDTA Displays performance data col-
lected

AS/400 Command Cross-Reference 33

PROCEDURES

System/36 AS/400 AS/400 Function

ENDSAM Ends the running environment
defined in the STRSAM
command
ENDSAMCOL Ends sampling data and writes
the collected sample data in a
database file member
STRPFRMON Starts a collection of perfor-
mance statistics based on
specified values and writes the
statistics to system-supplied
database files
STRSAM Periodically samples the
machine interface instruction
address while running speci-
fied programs
STRSAMCOL Starts sample address monitor
data collection and collects
sample data defined by the
STRSAM command
SMFPRINT PRTRSCRPT Prints a usage report for
devices from data collected by
the OS/400 performance
monitor
PRTSAMDTA Prints a report of the sampled
data collected by the
STRSAMCOL command and
recorded by the ENDSAMCOL
command
STRPFRT Starts the Performance Tools
licensed program main menu
SMFSTART STRPFRMON Starts a collection of perfor-
mance statistics based on
specified values and writes the
statistics to system-supplied
database files
SMFSTOP ENDPFRMON Ends collection of performance
statistics
SORT FMTDTA Formats sort file contents
SRTX FMTDTA Formats sort file contents
STARTM VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object

34 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

STATEST VFYCMN Shows the Verify a Commu-
nications Line display
STOPGRP ENDMOD Ends a single mode or all
active modes for a specific
advanced program-to-program
communications (APPC)
remote location
STOPM VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
STRTGRP STRMOD Starts a single mode or all
modes currently in use for an
APPC remote location
VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
SWITCH CHGJOB Changes the attributes of a job
CHGJOBD Changes the attributes speci-
fied for a job description object
SYSLIST None Function not supported or no
longer required on the AS/400
system
TAPECOPY CPYFRMTAP Copies records from a tape file
to a physical file, diskette,
tape, or program-described
printer file
CPYTOTAP Copies records to a tape file
from a physical, logical, or
spooled inline file, from tape,
or from diskette in a specified
block format
TAPEINIT INZTAP Initializes tapes for use on the
system
TAPESTAT DMPTAP Dumps label information, data
blocks, or both, from labeled
or unlabeled tapes to a
spooled printer file

AS/400 Command Cross-Reference 35

PROCEDURES

System/36 AS/400 AS/400 Function

PRTERRLOG Places a formatted print file of
the data in the machine error
log in a spooled printer device
file named QPCSMPRT and is
used by IBM service represen-
tatives
TEXTCONV None Function not supported or no
longer required on the AS/400
system
TEXTDCT CRTSPADCT Creates a user-defined dic-
tionary
CHKDOC Checks spelling or performs
grade-level analysis of a docu-
ment
TEXTDOC WRKDOC Allows a user to work with the
word processing function
CRTDOC Creates a document
EDTDOC Edits a document using the
word processing function of
OfficeVision/400
CHKDOC Checks spelling or performs
grade-level analysis of a docu-
ment
PRTDOC Prints a document using the
word processing function of
OfficeVision/400
TEXTFLDR CRTFLR Creates a folder
DSPFLR Displays or prints a list of
folders and documents, or
creates a database file con-
taining the list
WRKFLR Allows a user to work with
folders
TEXTOBJ WRKDOC Allows a user to work with the
word processing function
TEXTPROF WRKTXTPRF Allows a user to work with text
profiles
TEXTPRTQ WRKOUTQ Allows a user to work with the
overall status of all output
queues

36 AS/400 System/36-AS/400 Command Cross-

Reference
 PROCEDURES

System/36 AS/400 AS/400 Function

WRKDOC Allows a user to work with the
word processing function
CHGOUTQ Changes the attributes of the
output queue
TEXTREL RLSOUTQ Releases the spooled files that
were previously held on the
specified output queue
WRKOUTQ Allows a user to work with the
overall status of all output
queues
TOLIBR RSTOBJ Restores objects to a single
library saved from tape,
diskette, or a save file on disk
RSTS36LIBM Reads a file containing library
members, creates database
source or data file members
on the AS/400 system, and
copies the member data from
the file into each restored
member
TRACE DSPLOG Displays the contents of the
history log
STRJOBTRC Starts the tracing function to
collect performance statistics
for a specified job
STRSST Starts system service tools by
showing the System Service
Tools main menu
TRCCSP Traces a CSP/AE application
TRCICF Traces all ICF functions that
occur within the job that
entered the command
TRCINT Traces licensed internal code
and writes the data to a
spooled printer file, to tape, or
to diskette, or holds data in
internal storage
TRCJOB Traces program calls and
returns that occur in the
current job or in the job being
serviced by the Start Service
Job command

AS/400 Command Cross-Reference 37

PROCEDURES

System/36 AS/400 AS/400 Function

TRANSFER CPYFRMDKT Copies one or more files from
diskette to an output file or to
a printer
CPYTODKT Copies a database or device
file to diskette
TRNMGR CRTLINxxxx Creates a line description
where xxxx is the line class or
type
CHGLINxxxx Changes a line description
where xxxx is the line class or
type
VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
UPDATE CHGDTA Changes, adds, or deletes
records in an existing data-
base file
STRDFU Starts the Data File Utility
(DFU) program
STRRMTSPT Creates and varies on all con-
figuration objects needed for
remote support
ENDRMTSPT Ends remote support
WSU None Function not supported or no
longer required on the AS/400
system
WSUTXCR None Function not supported or no
longer required on the AS/400
system
WSUTXEX None Function not supported or no
longer required on the AS/400
system
WSUTXRV None Function not supported or no
longer required on the AS/400
system

38 AS/400 System/36-AS/400 Command Cross-

Reference
 CONTROL COMMANDS

System/36 Control Commands to

AS/400 Commands Cross-Reference
System/36 AS/400 AS/400 Function
ASSIGN(A) None Function not supported or no
longer required on the AS/400
system
CANCEL(C) ENDJOB Ends the specified job
job name
CANCEL(C) ENDJOB Ends the specified job
JOBQ(J)
CLRJOBQ Clears all batch jobs that are
not active from the specified
job queue
WRKJOBQ Allows a user to work with the
overall status of all job queues
CANCEL(C) DLTSPLF Deletes a specified spooled
PRT(P) file from the output queue
CLROUTQ Clears spooled files from spec-
ified queue
CANCEL(C) ENDJOB Ends the specified job
SESSION(S)
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
CHANGE(G) CHGSPLFA Changes the characteristics of
COPIES a spooled output file while it is
on the output queue
WRKOUTQ Allows a user to work with the
overall status of all output
queues
CHANGE(G) CHGSPLFA Changes the characteristics of
DEFER a spooled output file while it is
on the output queue
WRKOUTQ Allows a user to work with the
overall status of all output
queues
CHANGE(G) CHGSPLFA Changes the characteristics of
FORMS a spooled output file while it is
on the output queue

AS/400 Command Cross-Reference 39

CONTROL COMMANDS

System/36 AS/400 AS/400 Function

WRKOUTQ Allows a user to work with the
overall status of all output
queues
CHANGE(G) CHGSPLFA Changes the characteristics of
ID a spooled output file while it is
on the output queue
WRKOUTQ Allows a user to work with the
overall status of all output
queues
CHANGE(G) CHGJOB Changes the attributes of a job
JOBQ(J)
WRKJOBQ Allows a user to work with the
overall status of all job queues
CHANGE(G) CHGJOBQE Changes an existing job queue
JOBS entry in the specified sub-
system description
CHANGE(G) CHGSPLFA Changes the characteristics of
PRT(P) a spooled output file while it is
on the output queue
CHANGE(G) CHGJOB Changes the attributes of a job
PRTY
CHANGE(G) CHGSPLFA Changes the characteristics of
SEP a spooled output file while it is
on the output queue
CHGWTR Changes the form type,
number of file separators, and
output queue attributes of an
active printer writer
CONSOLE CHGMSGQ Changes the characteristics of
a specified message queue
DSPMSG Displays messages received at
the specified message queue
WRKMSGQ Allows a user to work with
message queues
INFOMSG CHGJOB Changes the attributes of a job
CHGMSGQ Changes the characteristics of
a specified message queue
HOLD HLDJOB Holds a job and prevents it
JOBQ(J) from being processed

40 AS/400 System/36-AS/400 Command Cross-

Reference
 CONTROL COMMANDS

System/36 AS/400 AS/400 Function

HOLD PRT(P) HLDSPLF Holds the specified output file
from additional processing by
a spooling writer
HLDWTR Holds activity of the specified
spooling writer at the end of a
record, a spooled file, or a
printed page
JOBQ(J) SBMDBJOB Submits from a job that is cur-
rently running batch jobs read
from a database
SBMDKTJOB Submits from a job that is cur-
rently running batch jobs read
from diskette
SBMFNCJOB Submits a batch job to allow
finance application programs
to communicate with 4701 or
4702 controller application pro-
grams
SBMJOB Allows a job that is running to
submit another job to a job
queue to be run later as a
batch job
SBMNETJOB Submits a batch job stream to
a user on another system in
the network
SBMRJEJOB Submits a remote job entry
input stream to the host
system as a batch job
MENU GO xxxx Immediately displays a menu
showing a group of commands
(where xxxx is the name of a
specific group of commands;
for example, GO CMDCRT
displays a menu of all create
commands)
MODE None Function not supported or no
longer required on the AS/400
system
MSG DSPMSG Displays messages received at
the specified message queue
SNDMSG Sends a message from one
user to one or more message
queues

AS/400 Command Cross-Reference 41

CONTROL COMMANDS

System/36 AS/400 AS/400 Function

SNDNETMSG Sends a message to a user on
a remote system
SNDPGMMSG Sends a message from a
program to a user, system
operator, user profile message
queue, or all active users
RCVMSG Receives a message sent to a
message queue
SNDBRKMSG Sends a message to one or
more work station message
queues
SNDUSRMSG Sends a message from a
program to a message queue
and receives a reply
OFF SIGNOFF Ends all interactive jobs or
causes all jobs in a group to
end
POWER PWRDWNSYS Powers down the system
ENDSYS Ends all activity on the system
and leaves only the console
active
PRTY CHGJOB Changes the attributes of a job
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
RELEASE(L) RLSJOB Releases a job for processing
JOBQ(J) after the job was held on the
job queue or was submitted to
the job queue as a held job
WRKJOBQ Allows a user to work with the
overall status of all job queues
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
RELEASE(L) RLSSPLF Releases a specified spooled
PRT(P) file being held on an output
queue for processing by a
spooling writer

42 AS/400 System/36-AS/400 Command Cross-

Reference
 CONTROL COMMANDS

System/36 AS/400 AS/400 Function

WRKOUTQ Allows a user to work with the
overall status of all output
queues
WRKWTR Allows a user to work with the
status of all printers, all
writers, or a specified writer
REPLY DSPMSG Displays messages received at
the specified message queue
RESTART STRPRTWTR Starts a spooling writer that
sends output to a specified
printer
ENDWTR Ends the processing by the
specified spooling writer
START JOB RLSJOB Releases a job for processing
after the job was held on the
job queue or was submitted to
the job queue as a held job
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
START CHGJOBQE Changes an existing job queue
JOBQ(J) entry in the specified sub-
system description
DSPSBSD Displays subsystem
description information
RLSJOBQ Releases for processing the
jobs previously held
START STRPRTWTR Starts a spooling writer that
PRT(P) sends output to a specified
printer
RLSWTR Releases a spooling writer that
was previously held
RLSOUTQ Releases the spooled files that
were previously held on the
specified output queue
START GO Displays a menu of commands
SERVICE CMDPRBMGT relating to problem manage-
ment
START Releases the communications
SESSION(N) RLSCMNDEV capability of a specified device
that is being held

AS/400 Command Cross-Reference 43

CONTROL COMMANDS

System/36 AS/400 AS/400 Function

START STRSBS Starts the subsystem activity
SYSTEM(S)
START WRKCFGSTS Allows a user to work with line,
WORKSTN(W) controller, and device config-
uration descriptions
STATUS(D) WRKALR Allows a user to work interac-
ALERT tively with alerts created by the
local system or received from
another system
STATUS(D) DSPAPPNINFO Displays or prints APPN*
APPC(A) network information
DSPMODSTS Displays the status of the
APPC device
WRKCFGSTS Allows a user to work with line,
controller, and device config-
uration descriptions
STATUS(D) WRKCFGSTS Allows a user to work with line,
COMM(C) controller, and device config-
uration descriptions
STATUS(D) WRKCFGSTS Allows a user to work with line,
COMCNFIG(H) controller, and device config-
uration descriptions
STATUS(D) WRKJOBQ Allows a user to work with the
JOBQ(J) overall status of all job queues
WRKSBMJOB Allows a user to work with the
status of all jobs submitted at
a work station
STATUS(D) WRKCFGSTS Allows a user to work with line,
LINE(L) controller, and device config-
uration descriptions
STATUS(D) DSPMSG Displays messages received at
MESSAGE(G) the specified message queue
STATUS(D) GO Displays a menu of commands
MSRJE(M) CMDRJE relating to remote job entry
WRKRJESSN Allows a user to work with
information about an active
remote job entry (RJE) session
STATUS(D) WRKOUTQ Allows a user to work with the
PRT(P) overall status of all output
queues

44 AS/400 System/36-AS/400 Command Cross-

Reference
 CONTROL COMMANDS

System/36 AS/400 AS/400 Function

STATUS(D) DSPJOB Displays information about job
SESSION(S) status
WRKJOB Allows you to work with or
change information concerning
a job
STATUS(D) WRKCFGSTS Allows a user to work with line,
SUBSESS(N) controller, and device config-
uration descriptions
WRKACTJOB Allows a user to work interac-
tively with performance and
status information for active
jobs in a specified subsystem
or all subsystems
STATUS(D) WRKCFGSTS Allows a user to work with line,
SUBSYS(I) controller, and device config-
uration descriptions
STATUS(D) WRKACTJOB Allows a user to work interac-
SYSTASK(T) tively with performance and
status information for active
jobs in a specified subsystem
or all subsystems
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
STATUS(D) WRKACTJOB Allows a user to work interac-
USERS(U) tively with performance and
status information for active
jobs in a specified subsystem
or all subsystems
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
STATUS(D) WRKCFGSTS Allows a user to work with line,
WORKSTN(W) controller, and device config-
uration descriptions
STATUS(D) WRKWTR Allows a user to work with the
WRT status of all printers, all
writers, or a specified writer
STATUSF(DF) WRKJOBQ Allows a user to work with the
JOBQ(J) overall status of all job queues

AS/400 Command Cross-Reference 45

CONTROL COMMANDS

System/36 AS/400 AS/400 Function

WRKSBMJOB Allows a user to work with the
status of all jobs submitted at
a work station
STATUSF(DF) WRKOUTQ Allows a user to work with the
PRT(P) overall status of all output
queues
STATUSF(DF) WRKACTJOB Allows a user to work interac-
USERS(U) tively with performance and
status information for active
jobs in a specified subsystem
or all subsystems
WRKUSRJOB Allows a user to work with a
list of all jobs and provides a
release option to start a held
job
STATUSF(DF) WRKCFGSTS Allows a user to work with line,
WORKSTN(W) controller, and device config-
uration descriptions
STOP JOB HLDJOB Holds a job and prevents it
NAME from being processed
STOP CHGJOBQE Changes an existing job queue
JOBQ(J) entry in the specified sub-
system description
DSPSBSD Displays subsystem
description information
HLDJOBQ Holds processing of all jobs on
the job queue or added to the
queue
STOP PRT(P) ENDWTR Ends the processing by the
specified spooling writer
HLDWTR Holds activity of the specified
spooling writer at the end of a
record, a spooled file, or a
printed page
HLDOUTQ Holds all currently waiting
spooled files and all spooled
files added to the queue from
being processed by a spooling
writer
STOP GO Displays a menu of commands
SERVICE CMDPRBMGT relating to problem manage-
ment

46 AS/400 System/36-AS/400 Command Cross-

Reference
 OCL STATEMENTS

System/36 AS/400 AS/400 Function

STOP HLDCMNDEV Holds communications to a
SESSION(N) remote display station, printer,
or system
STOP ENDSBS Ends the processing in a spec-
SYSTEM(S) ified subsystem or all subsys-
tems
ENDSYS Ends all activity on the system
and leaves only the console
active
ENDWTR Ends the processing by the
specified spooling writer
STOP HLDCMNDEV Holds communications to a
WORKSTN(W) remote display station, printer,
or system
TIME DSPSYSVAL Displays the name and value
of a specified system value
VARY VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
WRKCFGSTS Allows a user to work with line,
controller, and device config-
uration descriptions

System/36 OCL Statements to AS/400

Commands Cross-Reference
System/36 AS/400 AS/400 Function
// ABEND None Function not supported or no
longer required on the AS/400
system
// ALLOCATE ALCOBJ Allocates an object or list of
objects in a routing step for
later use in the routing step
// ATTR CHGJOB Changes the attributes of a job
// CHANGE CHGSPLFA Changes the characteristics of
a spooled output file while it is
on the output queue
// CANCEL DLTSPLF Deletes a specified spooled
file from the output queue

AS/400 Command Cross-Reference 47

OCL STATEMENTS

System/36 AS/400 AS/400 Function

// COMM OVRICFDEVE Temporarily adds the program
device entry and the remote
location name to the ICF file,
or overrides a program device
with the specified remote
location name and attributes
for an ICF file
// COMPILE CRTxxxPGM Creates a program using the
correct compiler where xxx
could be BAS (BASIC), CBL
(COBOL), FTN (FORTRAN),
or RPG.
// DATE CHGJOB Changes the attributes of a job
CHGSYSVAL Changes the current value of
the specified system value
// DEALLOC DLCOBJ Releases the allocations of
specified objects for the speci-
fied lock status
// DEBUG STRDBG Starts a job in debug mode
// EVOKE SBMJOB Allows a job that is running to
submit another job to a job
queue to be run later as a
batch job
// FILE (Disk) ALCOBJ Allocates an object or list of
objects in a routing step for
later use in the routing step
OVRDBF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
// FILE OVRDKTF Overrides the file named, over-
Diskette rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
// FILE (Tape) OVRTAPF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
// FILELIB ADDLIBLE Adds a library name to the
library list

48 AS/400 System/36-AS/400 Command Cross-

Reference
 OCL STATEMENTS

System/36 AS/400 AS/400 Function

CHGCURLIB Changes the current library
entry of the library list
// FORMS CRTPRTF Creates a printer device file
OVRPRTF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
// IMAGE None Function not supported or no
longer required on the AS/400
system
// INCLUDE CALL Calls a specified program and
passes control to it
// INFOMSG CHGJOB Changes the attributes of a job
CHGMSGQ Changes the characteristics of
a specified message queue
// JOBQ SBMJOB Allows a job that is running to
submit another job to a job
queue to be run later as a
batch job
// LIBRARY CHGCURLIB Changes the current library
entry of the library list
CHGJOBD Changes the attributes speci-
fied for a job description object
CHGLIBL Changes the user portion of
the current job's library list by
replacing it with the list of
user-specified libraries
CHGPRF Changes the values of a user's
profile
CHGUSRPRF Changes the values specified
in a user profile
// LOAD CALL Calls a specified program and
passes control to it
// LOCAL CHGDTAARA Changes the value of the local
data area, group data area, or
specified data area stored in a
library
CHGVAR Changes the value of a CL
variable
// LOG CHGJOB Changes the attributes of a job

AS/400 Command Cross-Reference 49

OCL STATEMENTS

System/36 AS/400 AS/400 Function

CHGJOBD Changes the attributes speci-
fied for a job description object
// MEMBER ADDMSGD Describes a message and
stores it in a specified
message file
CRTMSGF Creates a user-defined
message file
OVRMSGF Overrides a message file used
in a program
SNDPGMMSG Sends a message from a
program to a user, system
operator, user profile message
queue, or all active users
// MENU xxxx GO xxxx Immediately displays a menu
showing a group of commands
(where xxxx is the name of a
specific group of commands;
for example, GO CMDCRT
displays a menu of all create
commands)
// MSG SNDBRKMSG Sends a message to one or
more work station message
queues
SNDMSG Sends a message from one
user to one or more message
queues
SNDNETMSG Sends a message to a user on
a remote system
SNDPGMMSG Sends a message from a
program to a user, system
operator, user profile message
queue, or all active users
SNDUSRMSG Sends a message from a
program to a message queue
and receives a reply
// NOHALT MONMSG Monitors the messages sent to
the program message queue
// OFF SIGNOFF Ends all interactive jobs or
causes all jobs in a group to
end
// POWER PWRDWNSYS Powers down the system

50 AS/400 System/36-AS/400 Command Cross-

Reference
 OCL STATEMENTS

System/36 AS/400 AS/400 Function

// PRINTER OVRPRTF Overrides the file named, over-
rides certain parameters of
that file, or overrides the file
named and certain parameters
of the file that is processed
CHGPRTF Changes one or more of the
characteristics of the specified
printer device files
// PROMPT DCLF Declares one file to a CL
program
RCVF Used in a CL program to
receive data from a display
device or database file
SNDF Used (in a CL program) to
send a record to a display
device
SNDRCVF Used (in a CL program) to
send and receive data from a
device being used interactively
by a user
// REGION None Function not supported or no
longer required on the AS/400
system
// RESERVE None Function not supported or no
longer required on the AS/400
system
// RUN CALL xxxx Calls a specified program and
passes control to it
// SESSION OVRICFDEVE Temporarily adds the program
device entry and the remote
location name to the ICF file,
or overrides a program device
with the specified remote
location name and attributes
for an ICF file
// START STRPRTWTR Starts a spooling writer that
PRT(P) sends output to a specified
printer
RLSWTR Releases a spooling writer that
was previously held
RLSOUTQ Releases the spooled files that
were previously held on the
specified output queue

AS/400 Command Cross-Reference 51

OCL STATEMENTS

System/36 AS/400 AS/400 Function

// STOP ENDWTR Ends the processing by the
PRT(P) specified spooling writer
HLDWTR Holds activity of the specified
spooling writer at the end of a
record, a spooled file, or a
printed page
HLDOUTQ Holds all currently waiting
spooled files and all spooled
files added to the queue from
being processed by a spooling
writer
// SWITCH CHGJOB Changes the attributes of a job
CHGJOBD Changes the attributes speci-
fied for a job description object
// SYSLIST None Function not supported or no
longer required on the AS/400
system
// VARY VRYCFG Varies lines, controllers, or
devices on or off, and opti-
mally resets the IOP associ-
ated with the specified object
WRKCFGSTS Allows a user to work with line,
controller, and device config-
uration descriptions
// WAIT DLYJOB Allows your current job to wait
for a specified number of
seconds, or until a specified
time of day, before running
resumes
// WORKSTN OVRDSPF Overrides the file named in the
program, overrides certain
parameters of a file used by
the program, or overrides the
file named in the program and
certain parameters of the file
processed

52 AS/400 System/36-AS/400 Command Cross-

Reference
Appendix. AS/400 Control
Language Commands
Following is a complete list of the AS/400 control
language (CL) commands showing the command
abbreviations and their descriptive names.

Command Descriptive Name

ADDACC Add Access Code
ADDAJE Add Autostart Job Entry
ADDALRD Add Alert Description
ADDAUTLE Add Authorization List Entry
ADDBKP Add Breakpoint
ADDCALITM Add Calendar Item
ADDCFGLE Add Configuration List Entries
ADDCMNE Add Communications Entry
ADDCNNLE Add Connection List Entry
ADDCRSDMNK Add Cross Domain Key
ADDDIRE Add Directory Entry
ADDDLOAUT Add Document Library Object Authority
ADDDSTLE Add Distribution List Entry
ADDDTADFN Add Data Definition
ADDFCTE Add Forms Control Table Entry
ADDICFDEVE Add Intersystem Communications Func-
tion Program Device Entry
ADDJOBQE Add Job Queue Entry
ADDLFM Add Logical File Member
ADDLIBLE Add Library List Entry
ADDMSGD Add Message Description
ADDNETJOBE Add Network Job Entry
ADDOFCENR Add Office Enrollment
ADDOSIABSN Add OSI Abstract Syntax
ADDOSIADJN Add OSI Adjacent Node
ADDOSIAGT Add OSI Agent
ADDOSIAGTR Add OSI Agent Registration
ADDOSIAPPE Add OSI Application Entity
ADDOSIAPPM Add OSI Application Mode
ADDOSIAPPX Add OSI Application Context
ADDOSIAUNN Add OSI Authority Nickname
ADDOSICLPS Add OSI Connectionless-Mode Path Set
ADDOSICMPS Add OSI Connection-Mode Path Set
ADDOSIDUAR Add OSI Directory User Agent Registra-
tion
ADDOSIIX25 Add OSI Inbound X.25 Attributes
ADDOSILINE Add OSI Line
ADDOSILINS Add OSI Line Set
ADDOSIMGR Add OSI Manager

 Copyright IBM Corp. 1994 53

Command Descriptive Name
ADDOSIMGRR Add OSI Manager Registration
ADDOSINSAP Add OSI NSAP Address
ADDOSIOX25 Add OSI Outbound X.25 Attributes
ADDOSIQOSM Add OSI X.25 QOS Mode
ADDOSIRTE Add OSI Route
ADDOSISSEL Add OSI Local Service Access Point
Selector
ADDOSISUBN Add OSI Subnetwork
ADDOSITPTM Add OSI Transport Mode
ADDPFM Add Physical File Member
ADDPFRCOL Add Performance Collection
ADDPFVLM Add Physical File Variable-Length
Member
ADDPGM Add Program
ADDPJE Add Prestart Job Entry
ADDREXBUF Add REXX Buffer
ADDRJECMNE Add RJE Communications Entry
ADDRJERDRE Add RJE Reader Entry
ADDRJEWTRE Add RJE Writer Entry
ADDRPYLE Add Reply List Entry
ADDRTGE Add Routing Entry
ADDSCHIDXE Add Search Index Entry
ADDSOCE Add Sphere of Control Entry
ADDTCPLNK Add TCP/IP Link
ADDTCPPORT Add TCP/IP Port Entry
ADDTCPRSI Add TCP/IP Remote System Information
ADDTCPRTE Add TCP/IP Route Entry
ADDTRAINF Add TRLAN Adapter Information
ADDTRC Add Trace
ADDWSE Add Work Station Entry
ALCOBJ Allocate Object
ANSLIN Answer Line
ANSQST Answer Questions
ANZACCGRP Analyze Access Group
ANZDBF Analyze Database File
ANZDBFKEY Analyze Database File Keys
ANZPFRDTA Analyze Performance Data
ANZPGM Analyze Program
ANZPRB Analyze Problem
ANZQRY Analyze Query
ANZS34OCL Analyze System/34 OCL
APYJRNCHG Apply Journaled Changes
APYPTF Apply Program Temporary Fix
ASKQST Ask Question
BCHJOB Batch Job
CALL Call Program
CFGDSTSRV Configure Distribution Services
CFGOSI Configure OSI
CFGRPDS Configure VM/MVS Bridge

54 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
CFGTCP Configure TCP/IP
CHGACGCDE Change Accounting Code
CHGAJE Change Autostart Job Entry
CHGALRD Change Alert Description
CHGALRTBL Change Alert Table
CHGAUTLE Change Authorization List Entry
CHGCALAUT Change Calendar Authority
CHGCFGL Change Configuration List
CHGCLNUP Change Cleanup
CHGCLS Change Class
CHGCMD Change Command
CHGCMDDFT Change Command Default
CHGCMNE Change Communications Entry
CHGCNNL Change Connection List
CHGCNNLE Change Connection List Entry
CHGCOSD Change Class-of-Service Description
CHGCRSDMNK Change Cross Domain Key
CHGCSI Change Communications Side Information
CHGCSPPGM Change CSP/AE Program
CHGCTLAPPC Change Controller Description (APPC)
CHGCTLASC Change Controller Description (Async)
CHGCTLBSC Change Controller Description (BSC)
CHGCTLFNC Change Controller Description (Finance)
CHGCTLHOST Change Controller Description (SNA Host)
CHGCTLLWS Change Controller Description (Local
Work Station)
CHGCTLNET Change Controller Description (Network)
CHGCTLRTL Change Controller Description (Retail)
CHGCTLRWS Change Controller Description (Remote
Work Station)
CHGCTLTAP Change Controller Description (TAPE)
CHGCTLVWS Change Controller Description (Virtual
Work Station)
CHGCURLIB Change Current Library
CHGDBG Change Debug
CHGDDMF Change Distributed Data Management
File
CHGDEVAPPC Change Device Description (APPC)
CHGDEVASC Change Device Description (Async)
CHGDEVBSC Change Device Description (BSC)
CHGDEVDKT Change Device Description (Diskette)
CHGDEVDSP Change Device Description (Display
CHGDEVFNC Change Device Description (Finance)
CHGDEVHOST Change Device Description (SNA Host)
CHGDEVINTR Change Device Description (Intrasystem)
CHGDEVNET Change Device Description (Network)
CHGDEVPRT Change Device Description (Printer)
CHGDEVRTL Change Device Description (Retail)
CHGDEVSNUF Change Device Description (SNUF)
CHGDEVTAP Change Device Description (Tape)

Appendix. AS/400 Control Language Commands 55

Command Descriptive Name
CHGDIRE Change Directory Entry
CHGDKTF Change Diskette File
CHGDLOAUT Change Document Library Object
Authority
CHGDLOOWN Change Document Library Object Owner
CHGDOCD Change Document Description
CHGDSPF Change Display File
CHGDSTD Change Distribution Description
CHGDSTPWD Change Dedicated Service Tools Pass-
word
CHGDTA Change Data
CHGDTAARA Change Data Area
CHGFCNARA Change Functional Area
CHGFCT Change Forms Control Table
CHGFCTE Change Forms Control Table Entry
CHGGPHFMT Change Graph Format
CHGGPHPKG Change Graph Package
CHGGRPA Change Group Attributes
CHGHLLPTR Change High-Level Language Pointer
CHGICFDEVE Change ICF Program Device Entry
CHGICFF Change Intersystem Communications
Function File
CHGJOB Change Job
CHGJOBD Change Job Description
CHGJOBQE Change Job Queue Entry
CHGJRN Change Journal
CHGKBDMAP Change Keyboard Map
CHGLF Change Logical File
CHGLFM Change Logical File Member
CHGLIB Change Library
CHGLIBL Change Library List
CHGLINASC Change Line Description (Async)
CHGLINBSC Change Line Description (BSC)
CHGLINETH Change Line Description (Ethernet)
CHGLINIDLC Change Line Description for IDLC
CHGLINSDLC Change Line Description (SDLC)
CHGLINTDLC Change Line Description (TDLC)
CHGLINTRN Change Line Description (Token-Ring
Network)
CHGLINX25 Change Line Description (X.25)
CHGMNU Change Menu
CHGMODD Change Mode Description
CHGMSGD Change Message Description
CHGMSGQ Change Message Queue
CHGMSTK Change Master Key
CHGNETA Change Network Attributes
CHGNETJOBE Change Network Job Entry
CHGNWIISDN Change Network Interface Description for
ISDN

56 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
CHGOBJD Change Object Description
CHGOBJOWN Change Object Owner
CHGOFCENR Change Office Enrollment
CHGOSIABSN Change OSI Abstract Syntax
CHGOSIADJN Change OSI Adjacent Node
CHGOSIAPPE Change OSI Application Entity
CHGOSIAPPM Change OSI Application Mode
CHGOSIAPPX Change OSI Application Context
CHGOSIAUNN Change OSI Authority Nickname
CHGOSICLPS Change OSI Connectionless-Mode Path
Set
CHGOSICMPS Change OSI Connection-Mode Path Set
CHGOSIDUAR Change OSI Directory User Agent Regis-
tration
CHGOSIIX25 Change OSI Inbound X.25 Attributes
CHGOSILCLA Change OSI Local Attributes
CHGOSILINE Change OSI Line
CHGOSILINS Change OSI Line Set
CHGOSIMGRR Change OSI Manager Registration
CHGOSINSAP Change OSI NSAP Address
CHGOSIOX25 Change OSI Outbound X.25 Attributes
CHGOSIQOSM Change OSI X.25 QOS Mode
CHGOSIRTE Change OSI Route
CHGOSISSEL Change OSI Local Service Access Point
Selector
CHGOSISUBN Change OSI Subnetwork
CHGOSITPTM Change OSI Transport Mode
CHGOUTQ Change Output Queue
CHGPCOPRF Change PC Support Organizer Profile
CHGPDGPRF Change Print Descriptor Group Profile
CHGPF Change Physical File
CHGPFM Change Physical File Member
CHGPFRCOL Change Performance Collection
CHGPGM Change Program
CHGPGMVAR Change Program Variable
CHGPJ Change Prestart Job
CHGPJE Change Prestart Job Entry
CHGPRB Change Problem
CHGPRF Change Profile
CHGPRTF Change Printer File
CHGPTR Change Pointer
CHGPWD Change Password
CHGPWRSCD Change Power On/Off Schedule
CHGPWRSCDE Change Power On/Off Schedule Entry
CHGQSTDB Change Question-and-Answer Database
CHGRJECMNE Change RJE Communications Entry
CHGRJERDRE Change RJE Reader Entry
CHGRJEWTRE Change RJE Writer Entry
CHGRPYLE Change Reply List Entry
CHGRTGE Change Routing Entry

Appendix. AS/400 Control Language Commands 57

Command Descriptive Name
CHGSAVF Change Save File
CHGSBSD Change Subsystem Description
CHGSCHIDX Change Search Index
CHGSHRPOOL Change Shared Storage Pool
CHGSPLFA Change Spooled File Attributes
CHGSRCPF Change Source Physical File
CHGSRVPVDA Change Service Provider Attributes
CHGSSND Change Session Description
CHGSSNMAX Change Session Maximum
CHGSYSLIBL Change System Library List
CHGSYSVAL Change System Value
CHGS34LIBM Change System/34 Library Member(s)
CHGS36 Change System/36
CHGS36MSGL Change System/36 Message List
CHGS36PGMA Change System/36 Program Attributes
CHGS36PRCA Change System/36 Procedure Attributes
CHGS36SRCA Change System/36 Source Attributes
CHGTAPF Change Tape File
CHGTCPA Change TCP/IP Attributes
CHGTCPLNK Change TCP/IP Link
CHGTCPRTE Change TCP/IP Route Entry
CHGTRAINF Change TRLAN Adapter Information
CHGUSRPRF Change User Profile
CHGVAR Change Variable
CHGWSE Change Work Station Entry
CHGWTR Change Writer
CHKDKT Check Diskette
CHKDLO Check Document Library Object
CHKDOC Check Document
CHKIGCTBL Check DBCS Font Table
CHKOBJ Check Object
CHKPWD Check Password
CHKRCDLCK Check Record Locks
CHKTAP Check Tape
CLOF Close File
CLRDKT Clear Diskette
CLRJOBQ Clear Job Queue
CLRLIB Clear Library
CLRMSGQ Clear Message Queue
CLROUTQ Clear Output Queue
CLRPFM Clear Physical File Member
CLRRTLF Clear Retail File
CLRSAVF Clear Save File
CLRTRCDTA Clear Trace Data
CMPJRNIMG Compare Journal Images
CNLRJERDR Cancel RJE Reader
CNLRJEWTR Cancel RJE Writer
COMMIT Commit
CPHDTA Cipher Data

58 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
CPROBJ Compress Object
CPYCFGL Copy Configuration List
CPYDOC Copy Document
CPYF Copy File
CPYFCNARA Copy Functional Area
CPYFRMDKT Copy from Diskette
CPYFRMPCD Copy from PC Document
CPYFRMQRYF Copy From Query File
CPYFRMTAP Copy from Tape
CPYGPHFMT Copy Graph Format
CPYGPHPKG Copy Graph Package
CPYIGCSRT Copy IGC Sort
CPYIGCTBL Copy DBCS Font Table
CPYLIB Copy Library
CPYPFRDTA Copy Performance Data
CPYPTF Copy Program Temporary Fix
CPYPTFSAVF Copy PTF Save File
CPYSPLF Copy Spooled File
CPYSRCF Copy Source File
CPYTODKT Copy to Diskette
CPYTOPCD Copy to PC Document
CPYTOTAP Copy to Tape
CRTALRTBL Create Alert Table
CRTAPAR Create Authorized Program Analysis
Report
CRTAUTHLR Create Authority Holder
CRTAUTL Create Authorization List
CRTBASPGM Create Basic Program
CRTCAL Create Calendar
CRTCBLPGM Create COBOL Program
CRTCFGL Create Configuration List
CRTCLD Create C Locale Description
CRTCLPGM Create Control Language Program
CRTCLS Create Class
CRTCMD Create Command
CRTCNNL Create Connection List
CRTCOSD Create Class-of-Service Description
CRTCPGM Create C/400* Program
CRTCSI Create Communications Side Information
CRTCSPAPP Create CSP/AE Application Objects
CRTCSPMSGF Create CSP/AE User Message File
CRTCTLAPPC Create Controller Description (APPC)
CRTCTLASC Create Controller Description (Async)
CRTCTLBSC Create Controller Description (BSC)
CRTCTLFNC Create Controller Description (Finance)
CRTCTLHOST Create Controller Description (SNA Host)
CRTCTLLWS Create Controller Description (Local Work
Station)
CRTCTLNET Create Controller Description (Network)
CRTCTLRTL Create Controller Description (Retail)

Appendix. AS/400 Control Language Commands 59

Command Descriptive Name
CRTCTLRWS Create Controller Description (Remote
Work Station)
CRTCTLTAP Create Controller Description (Tape)
CRTCTLVWS Create Controller Description (Virtual
Work Station)
CRTDDMF Create Distributed Data Management File
CRTDEVAPPC Create Device Description (APPC)
CRTDEVASC Create Device Description (Async)
CRTDEVBSC Create Device Description (BSC)
CRTDEVDKT Create Device Description (Diskette)
CRTDEVDSP Create Device Description (Display)
CRTDEVFNC Create Device Description (Finance)
CRTDEVHOST Create Device Description (SNA Host)
CRTDEVINTR Create Device Description (Intrasystem)
CRTDEVNET Create Device Description (Network)
CRTDEVPRT Create Device Description (Printer)
CRTDEVRTL Create Device Description (Retail)
CRTDEVSNUF Create Device Description (SNUF)
CRTDEVTAP Create Device Description (Tape)
CRTDFUDSPF Create DFU Display File
CRTDKTF Create Diskette File
CRTDOC Create Document
CRTDSPF Create Display File
CRTDSTL Create Distribution List
CRTDTAARA Create Data Area
CRTDTADCT Create a Data Dictionary
CRTDTAQ Create Data Queue
CRTDUPOBJ Create Duplicate Object
CRTEDTD Create Edit Description
CRTFCNARA Create Functional Area
CRTFCT Create Forms Control Table
CRTFLR Create Folder
CRTFNTRSC Create Font Resources
CRTFORMDF Create Form Definition
CRTFTNPGM Create FORTRAN/400 Program
CRTGDF Create Graphics Data File
CRTGPHFMT Create Graph Format
CRTGPHPKG Create Graph Package
CRTGSS Create Graphics Symbol Set
CRTHSTDTA Create Historical Data
CRTICFF Create Intersystem Communications
Function File
CRTIGCDCT Create DBCS Conversion Dictionary
CRTJOBD Create Job Description
CRTJOBQ Create Job Queue
CRTJRN Create Journal
CRTJRNRCV Create Journal Receiver
CRTLASREP Create Local Abstract Syntax
CRTLF Create Logical File

60 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
CRTLIB Create Library
CRTLINASC Create Line Description (Async)
CRTLINBSC Create Line Description (BSC)
CRTLINETH Create Line Description (Ethernet)
CRTLINIDLC Create Line Description for IDLC
CRTLINSDLC Create Line Description (SDLC)
CRTLINTDLC Create Line Description (TDLC)
CRTLINTRN Create Line Description (Token-Ring
Network)
CRTLINX25 Create Line Description (X.25)
CRTMNU Create Menu
CRTMODD Create Mode Description
CRTMSGF Create Message File
CRTMSGFMNU Create Message File Menu
CRTMSGQ Create Message Queue
CRTNWIISDN Create Network Interface for ISDN
CRTOUTQ Create Output Queue
CRTOVL Create an Overlay
CRTPAGDFN Create Page Definition
CRTPAGSEG Create Page Segment
CRTPASPGM Create Pascal Program
CRTPDG Create Print Descriptor Group
CRTPF Create Physical File
CRTPLIPGM Create PL/I Language Program
CRTPNLGRP Create Panel Group
CRTPRTF Create Printer File
CRTQMFORM Create Query Management Form
CRTQMQRY Create Query Management Query
CRTQSTDB Create Question and Answer Database
CRTQSTLOD Create Question-and-Answer Load
CRTRJEBSCF Create RJE BSC File
CRTRJECFG Create RJE Configuration
CRTRJECMNF Create RJE Communications File
CRTRMCPGM Create RM/COBOL-85 Program
CRTRPGPGM Create RPG/400* Program
CRTRPTPGM Create Auto Report Program
CRTRTLF Create Retail File
CRTRTLSRC Create Retail Source
CRTSAVF Create Save File
CRTSBSD Create Subsystem Description
CRTSCHIDX Create Search Index
CRTSPADCT Create Spelling Aid Dictionary
CRTSQLC Create Structured Query Language C
CRTSQLCBL Create Structured Query Language
COBOL
CRTSQLFTN Create Structured Query Language
FORTRAN
CRTSQLPLI Create Structured Query Language PL/I
CRTSQLRPG Create Structured Query Language RPG
CRTSRCPF Create Source Physical File

Appendix. AS/400 Control Language Commands 61

Command Descriptive Name
CRTSSND Create Session Description
CRTS36CBL Create System/36 COBOL
CRTS36DSPF Create System/36 Display File
CRTS36MNU Create System/36 Menu
CRTS36MSGF Create System/36 Message File
CRTS36RPG Create System/36 RPG
CRTS36RPGR Create System/36 RPGR
CRTS36RPT Create System/36 Auto Report
CRTTAPF Create Tape File
CRTTBL Create Table
CRTUSRPRF Create User Profile
CVTBASSTR Convert BASIC Stream Files
CVTBASUNF Convert BASIC Unformatted Files
CVTBGUDTA Convert BGU Data
CVTCLSRC Convert CL Source
CVTDAT Convert Date
CVTEDU Convert Education
CVTFRMRTLF Convert from Retail File
CVTPFRDTA Convert Performance Data
CVTRJEDTA Convert RJE Data
CVTS36CFG Convert System/36 Configuration
CVTS36FCT Convert System/36 Forms Control Table
CVTS36JOB Convert System/36 Job
CVTS36QRY Convert System/36 Query
CVTS38JOB Convert System/38 Job
CVTTOFLR Convert to Folder
CVTTORTLF Convert to Retail File
DATA Add Data Definition
DCL Declare CL Variable
DCLF Declare File
DCPOBJ Decompress Object
DLCOBJ Deallocate Object
DLTALR Delete Alert
DLTALRTBL Delete Alert Table
DLTAUTHLR Delete Authority Holder
DLTAUTL Delete Authorization List
DLTCAL Delete Calendar
DLTCFGL Delete Configuration List
DLTCHTFMT Delete Chart Format
DLTCLD Delete C Locale Description
DLTCLS Delete Class
DLTCMD Delete Command
DLTCNNL Delete Connection List
DLTCOSD Delete Class-of Service Description
DLTCSI Delete Communications Side Information
DLTCSPMAP Delete CSP/AE Map Group
DLTCSPTBL Delete CSP/AE Table
DLTCTLD Delete Controller Description
DLTDEVD Delete Device Description

62 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
DLTDFUPGM Delete DFU Program
DLTDKTLBL Delete Diskette Label
DLTDLO Delete Document Library Object
DLTDOCL Delete Document List
DLTDST Delete Distribution
DLTDSTL Delete Distribution List
DLTDTAARA Delete Data Area
DLTDTADCT Delete Data Dictionary
DLTDTAQ Delete Data Queue
DLTEDTD Delete Edit Description
DLTF Delete File
DLTFCNARA Delete Functional Area
DLTFCT Delete Forms Control Table
DLTFNTRSC Delete Font Resources
DLTFORMDF Delete Form Definition
DLTGPHFMT Delete Graph Format
DLTGPHPKG Delete Graph Package
DLTGSS Delete Graphics Symbol Set
DLTHSTDTA Delete Historical Data
DLTIGCDCT Delete DBCS Conversion Dictionary
DLTIGCSRT Delete IGC Sort
DLTIGCTBL Delete DBCS Font Table
DLTJOBD Delete Job Description
DLTJOBQ Delete Job Queue
DLTJRN Delete Journal
DLTJRNRCV Delete Journal Receiver
DLTLIB Delete Library
DLTLICPGM Delete Licensed Program
DLTLIND Delete Line Description
DLTMNU Delete Menu
DLTMODD Delete Mode Description
DLTMSGF Delete Message File
DLTMSGQ Delete Message Queue
DLTNETF Delete Network File
DLTNWID Delete Network Interface Description
DLTOUTMAIL Delete Outgoing Mail
DLTOUTQ Delete Output Queue
DLTOVL Delete Overlay
DLTOVR Delete Override
DLTOVRDEVE Delete Override Device Entry
DLTPAGDFN Delete Page Definition
DLTPAGSEG Delete Page Segment
DLTPDG Delete Print Descriptor Group
DLTPFRDTA Delete Performance Data
DLTPGM Delete Program
DLTPNLGRP Delete Panel Group
DLTPRB Delete Problem
DLTPTF Delete PTF
DLTQMFORM Delete Query Management Form
DLTQMQRY Delete Query Management Query

Appendix. AS/400 Control Language Commands 63

Command Descriptive Name
DLTQRY Delete Query
DLTQST Delete Question
DLTQSTDB Delete Question-and-Answer Database
DLTRJECFG Delete RJE Configuration
DLTRTLF Delete Retail File
DLTRTLRCD Delete Retail Record
DLTSBSD Delete Subsystem Description
DLTSCHIDX Delete Search Index
DLTSPADCT Delete Spelling Aid Dictionary
DLTSPLF Delete Spooled File
DLTSSND Delete Session Description
DLTTBL Delete Table
DLTUSRIDX Delete User Index
DLTUSRPRF Delete User Profile
DLTUSRQ Delete User Queue
DLTUSRSPC Delete User Space
DLYJOB Delay Job
DMPCLPGM Dump CL Program
DMPDLO Dump Document Library Object
DMPJOB Dump Job
DMPJOBINT Dump Job Internal
DMPOBJ Dump Object
DMPSYSOBJ Dump System Object
DMPTAP Dump Tape
DMPTRC Dump Trace
DO Do
DSCJOB Disconnect Job
DSPACC Display Access Code
DSPACCAUT Display Access Code Authority
DSPACCGRP Display Access Group
DSPACTPJ Display Active Prestart Jobs
DSPAPPNINF Display APPN Information
DSPAUTHLR Display Authority Holder
DSPAUTL Display Authorization List
DSPAUTLDLO Display Authorization List Document
Library Objects
DSPAUTLOBJ Display Authorization List Objects
DSPAUTUSR Display Authorized Users
DSPBKP Display Breakpoints
DSPCALAUT Display Calendar Authority
DSPCALD Display Calendar Description
DSPCALITM Display Calendar Item
DSPCFGL Display Configuration List
DSPCHT Display Chart
DSPCLS Display Class
DSPCMD Display Command
DSPCNNL Display Connection List
DSPCNNSTS Display Connection Status
DSPCOSD Display Class-of-Service Description

64 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
DSPCSI Display Communications Side Information
DSPCSPOBJ Display CSP/AE Object
DSPCTLD Display Controller Description
DSPDBG Display Debug
DSPDBR Display Database Relations
DSPDDMF Display Distributed Data Management File
DSPDEVD Display Device Description
DSPDIR Display Directory
DSPDKT Display Diskette
DSPDLOAUT Display Document Library Object Authority
DSPDOC Display Document
DSPDSTL Display Distribution List
DSPDSTLOG Display Distribution Log
DSPDSTSRV Display Distribution Services
DSPDTA Display Data
DSPDTAARA Display Data Area
DSPDTADCT Display Data Dictionary
DSPEDTD Display Edit Description
DSPFD Display File Description
DSPFFD Display File Field Description
DSPFLR Display Folder
DSPGDF Display Graphics Data File
DSPHDWRSC Display Hardware Resources
DSPHFS Display Hierarchical File Systems
DSPHLPDOC Display Help Document
DSPHSTGPH Display Historical Graph
DSPIGCDCT Display DBCS Conversion Dictionary
DSPJOB Display Job
DSPJOBD Display Job Description
DSPJOBLOG Display Job Log
DSPJRN Display Journal
DSPJRNRCVA Display Journal Receiver Attributes
DSPKBDMAP Display Keyboard Map
DSPLCLHDW Display Local Hardware
DSPLIB Display Library
DSPLIBD Display Library Description
DSPLIBL Display Library List
DSPLIND Display Line Description
DSPLOG Display Log
DSPMNUA Display Menu Attributes
DSPMODD Display Mode Description
DSPMODSTS Display Mode Status
DSPMSG Display Messages
DSPMSGD Display Message Descriptions
DSPNETA Display Network Attributes
DSPNWID Display Network Interface Description
DSPOBJAUT Display Object Authority
DSPOBJD Display Object Description
DSPOSIABSN Display OSI Abstract Syntax
DSPOSIADJN Display OSI Adjacent Node

Appendix. AS/400 Control Language Commands 65

Command Descriptive Name
DSPOSIAPPE Display OSI Application Entity
DSPOSIAPPM Display OSI Application Mode
DSPOSIAPPX Display OSI Application Context
DSPOSIASN Display OSI Associations
DSPOSIAUNN Display OSI Authority Nickname
DSPOSICLPS Display OSI Connectionless-Mode Path
Set
DSPOSICMPS Display OSI Connection-Mode Path Set
DSPOSIDMN Display OSI Management Domain
DSPOSIDUAR Display OSI Directory User Agent Regis-
tration
DSPOSIERR Display OSI Error Counters
DSPOSIIX25 Display OSI Inbound X.25 Attributes
DSPOSILCLA Display OSI Local Attributes
DSPOSILINE Display OSI Line
DSPOSILINS Display OSI Line Set
DSPOSIMGR Display OSI Manager
DSPOSIMGRR Display OSI Manager Registration
DSPOSINSAP Display OSI NSAP Address
DSPOSIOX25 Display OSI Outbound X.25 Attributes
DSPOSIPARM Display OSI Parameters
DSPOSIPRF Display OSI Profile
DSPOSIQOSM Display OSI X.25 QOS Mode
DSPOSIRTE Display OSI Route
DSPOSISAP Display Service Access Points
DSPOSISSEL Display OSI Local Service Access Point
Selector
DSPOSISTC Display OSI Statistics
DSPOSISTS Display OSI Status
DSPOSISUBN Display OSI Subnetwork
DSPOSITHLD Display OSI Thresholds
DSPOSITPTM Display OSI Transport Mode
DSPOVR Display Override
DSPPDGPRF Display Print Descriptor Group Profile
DSPPFM Display Physical File Member
DSPPFRDTA Display Performance Data
DSPPFRGPH Display Performance Graph
DSPPGM Display Program
DSPPGMADP Display Program Adopt
DSPPGMREF Display Program References
DSPPGMVAR Display Program Variable
DSPPRB Display Problem
DSPPTF Display Program Temporary Fix
DSPPWRSCD Display Power On/Off Schedule
DSPRCDLCK Display Record Locks
DSPRJECFG Display RJE Configuration
DSPSAVF Display Save File
DSPSBSD Display Subsystem Description
DSPSFWRSC Display Software Resources

66 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
DSPSOCSTS Display Sphere of Control Status
DSPSPLF Display Spooled File
DSPSRVPVDA Display Service Provider Attributes
DSPSRVSTS Display Service Status
DSPSYSVAL Display System Value
DSPS36 Display System/36
DSPTAP Display Tape
DSPTRAPRF Display TRLAN Adapter Profile
DSPTRC Display Trace
DSPTRCDTA Display Trace Data
DSPTRNSTS Display TRN Status
DSPUSRPMN Display User Permission
DSPUSRPRF Display User Profile
DSPWSUSR Display Work Station User
DUPDKT Duplicate Diskette
DUPTAP Duplicate Tape
EDTAUTL Edit Authorization List
EDTDEVRSC Edit Device Resources
EDTDLOAUT Edit Document Library Object Authority
EDTDOC Edit Document
EDTIGCDCT Edit DBCS Conversion Dictionary
EDTIGCTBL Edit DBCS Table
EDTLIBL Edit Library List
EDTOBJAUT Edit Object Authority
EDTQST Edit Questions and Answers
EDTRBDAP Edit Rebuild Of Access Paths
EDTS36PGMA Edit System/36 Program Attributes
EDTS36PRCA Edit System/36 Procedure Attributes
EDTS36SRCA Edit System/36 Source Attributes
EJTEMLOUT Eject Emulation Output
ELSE Else
EMLPRTKEY Emulate Printer Key
ENCCPHK Encipher Cipher Key
ENCFRMMSTK Encipher from Master Key
ENCTOMSTK Encipher to Master Key
ENDBCHJOB End Batch Job
ENDCBLDBG End COBOL Debug
ENDCLNUP End Cleanup
ENDCMTCTL End Commitment Control
ENDCPYSCN End Copy Screen
ENDCTLRCY End Controller Recovery
ENDDBG End Debug
ENDDEVRCY End Device Recovery
ENDDO End Do
ENDDSKCOL End Disk Data Collection
ENDEPMENV End EPM Environment
ENDGRPJOB End Group Job
ENDINP End Input
ENDJOB End Job
ENDJOBABN End Job Abnormal

Appendix. AS/400 Control Language Commands 67

Command Descriptive Name
ENDJOBTRC End Job Trace
ENDJRNAP End Journal Access Path
ENDJRNPF End Journal Physical File Changes
ENDLINRCY End Line Recovery
ENDMOD End Mode
ENDNWIRCY End Network Interface Recovery
ENDOSI End OSI Subsystem
ENDOSIASN End OSI Associations
ENDOSINL End OSI Network Resource
ENDPASTHR End Pass-Through
ENDPFRMON End Performance Monitor
ENDPGM End Program
ENDPJ End Prestart Jobs
ENDPRTEML End Printer Emulation
ENDRCV End Receive
ENDRDR End Reader
ENDRJESSN End RJE Session
ENDRMTSPT End Remote Support
ENDRQS End Request
ENDSAM End Sampled Address Monitor
ENDSAMCOL End Sampled Address Monitor Data Col-
lection
ENDSBS End Subsystem
ENDSRVJOB End Service Job
ENDSYS End System
ENDS36 End System/36
ENDTCPCNN End TCP/IP Connection
ENDTCPLNK End TCP/IP Link
ENDTIESSN End Technical Information Exchange
Session
ENDWTR End Writer
EXTPGMINF Extract Program Information
FILDOC File Document
FMTDTA Format Data
FNDSTRPDM Find String Using PDM
GENCPHK Generate Cipher Key
GENCRSDMNK Generate Cross Domain Key
GENMAC Generate Message Authentication Code
GENPIN Generate Personal Identification Number
GENS36RPT Generate System/36 Report
GENS38RPT Generate System/38 Reports
GO Go to Menu
GOTO Go To
GRTACCAUT Grant Access Code Authority
GRTOBJAUT Grant Object Authority
GRTUSRAUT Grant User Authority
GRTUSRPMN Grant User Permission
HLDCMNDEV Hold Communications Device
HLDDSTQ Hold Distribution Queue

68 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
HLDJOB Hold Job
HLDJOBQ Hold Job Queue
HLDOUTQ Hold Output Queue
HLDPTF Hold PTF
HLDRDR Hold Reader
HLDSPLF Hold Spooled File
HLDWTR Hold Writer
IF If
INZDKT Initialize Diskette
INZPCS Initialize PC Support/400
INZPFM Initialize Physical File Member
INZSYS Initialize System
INZTAP Initialize Tape
LNKDTADFN Link Data Definition
LODPTF Load Program Temporary Fix
LODQSTDB Load Question-and-Answer Database
MDLSYS Model System
MGRS36ITM Migrate System/36 Item
MGRS38OBJ Migrate System/38 Objects
MONMSG Monitor Message
MOVDOC Move Document
MOVOBJ Move Object
MRGDOC Merge Document
MRGFORMD Merge Form Description
MRGMSGF Merge Message File
OPNDBF Open Database File
OPNQRYF Open Query File
ORDSPTPTF Order Supported Product PTFs
OVRDBF Override with Database File
OVRDKTF Override with Diskette File
OVRDSPF Override with Display File
OVRICFDEVE Override Intersystem Communications
Function Program Device Entry
OVRICFF Override with Intersystem Communica-
tions Function File
OVRMSGF Override with Message File
OVRPRTF Override with Printer File
OVRSAVF Override Save File
OVRTAPF Override with Tape File
PAGDOC Paginate Document
PGM Program
POSDBF Position Database File
PRTACTRPT Print Activity Report
PRTAFPDTA Print Advanced Function Printer Data
PRTCAL Print Calendar
PRTCMDUSG Print Command Usage
PRTCPTRPT Print Component Report
PRTCSPAPP Print CSP/AE Application
PRTDEVADR Print Device Addresses
PRTDOC Print Document

Appendix. AS/400 Control Language Commands 69

Command Descriptive Name
PRTDSKRPT Print Disk Activity Report
PRTERRLOG Print Error Log
PRTINTDTA Print Internal Data
PRTJOBRPT Print Job Report
PRTJOBTRC Print Job Trace
PRTLCKRPT Print Lock Report
PRTPOLRPT Print Pool Report
PRTRSCRPT Print Resource Report
PRTRTLTPL Print Retail Template
PRTSAMDTA Print Sampled Address Monitor Data
PRTSYSRPT Print System Report
PRTTNSRPT Print Transaction Report
PRTTRCRPT Print Trace Report
PWRDWNSYS Power Down System
QRYCALITM Query Calendar Item
QRYDOCLIB Query Document Library
QRYDST Query Distribution
QRYTIEF Query Technical Information Exchange
File
RCLDDMCNV Reclaim Distributed Data Management
Conversations
RCLDLO Reclaim Document Library Object
RCLRSC Reclaim Resources
RCLSPLSTG Reclaim Spool Storage
RCLSTG Reclaim Storage
RCLTMPSTG Reclaim Temporary Storage
RCVDST Receive Distribution
RCVF Receive File
RCVJRNE Receive Journal Entry
RCVMGRDTA Receive Migration Data
RCVMSG Receive Message
RCVNETF Receive Network File
RCVRTLF Receive Retail File
RCVTIEF Receive Technical Information Exchange
File
RESMGRNAM Resolve Duplicate and Incorrect Office
Object Names
RETURN Return
RGZDLO Reorganize Document Library Object
RGZPFM Reorganize Physical File Member
RLSCMNDEV Release Communications Device
RLSDSTQ Release Distribution Queue
RLSJOB Release Job
RLSJOBQ Release Job Queue
RLSOUTQ Release Output Queue
RLSPTF Release PTF
RLSRDR Release Reader
RLSRMTPHS Release Remote Phase
RLSSPLF Release Spooled File

70 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
RLSWTR Release Writer
RMVACC Remove Access Code
RMVAJE Remove Autostart Job Entry
RMVALRD Remove Alert Description
RMVAUTLE Remove Authorization List Entry
RMVBKP Remove Breakpoint
RMVCALITM Remove Calendar Item
RMVCFGLE Remove Configuration List Entries
RMVCMNE Remove Communications Entry
RMVCNNLE Remove Connection List Entry
RMVCRSDMNK Remove Cross Domain Key
RMVDIRE Remove Directory Entry
RMVDLOAUT Remove Document Library Object
Authority
RMVDSTLE Remove Distribution List Entry
RMVFCTE Remove Forms Control Table Entry
RMVICFDEVE Remove Intersystem Communications
Function Program Device Entry
RMVJOBQE Remove Job Queue Entry
RMVJRNCHG Remove Journaled Changes
RMVLIBLE Remove Library List Entry
RMVM Remove Member
RMVMSG Remove Message
RMVMSGD Remove Message Description
RMVNETJOBE Remove Network Job Entry
RMVOFCENR Remove Office Enrollment
RMVOSIABSN Remove OSI Abstract Syntax
RMVOSIADJN Remove OSI Adjacent Node
RMVOSIAGT Remove OSI Agent
RMVOSIAGTR Remove OSI Agent Registration
RMVOSIAPPE Remove OSI Application Entity
RMVOSIAPPM Remove OSI Application Mode
RMVOSIAPPX Remove OSI Application Context
RMVOSIAUNN Remove OSI Authority Nickname
RMVOSICLPS Remove OSI Connectionless-Mode Path
Set
RMVOSICMPS Remove OSI Connection-Mode Path Set
RMVOSIDUAR Remove OSI Directory User Agent Regis-
trations
RMVOSIIX25 Remove OSI Inbound X.25 Attributes
RMVOSILINE Remove OSI Line
RMVOSILINS Remove OSI Line Set
RMVOSIMGR Remove OSI Manager
RMVOSIMGRR Remove Manager Registration
RMVOSINSAP Remove OSI NSAP Address
RMVOSIOX25 Remove OSI Outbound X.25 Attributes
RMVOSIQOSM Remove OSI X.25 QOS Mode
RMVOSIRTE Remove OSI Route
RMVOSISSEL Remove OSI Local Service Access Point
Selector

Appendix. AS/400 Control Language Commands 71

Command Descriptive Name
RMVOSISUBN Remove OSI Subnetwork
RMVOSITPTM Remove OSI Transport Mode
RMVPGM Remove Program
RMVPJE Remove Prestart Job Entry
RMVPTF Remove Program Temporary Fix
RMVREXBUF Remove REXX Buffer
RMVRJECMNE Remove RJE Communications Entry
RMVRJERDRE Remove RJE Reader Entry
RMVRJEWTRE Remove RJE Writer Entry
RMVRPYLE Remove Reply List Entry
RMVRTGE Remove Routing Entry
RMVSCHIDXE Remove Search Index Entry
RMVSOCE Remove Sphere of Control Entry
RMVTCPLNK Remove TCP/IP Link
RMVTCPPORT Remove TCP/IP Port Entry
RMVTCPRSI Remove TCP/IP Remote System Informa-
tion
RMVTCPRTE Remove TCP/IP Route Entry
RMVTRA Remove TRLAN Adapter
RMVTRAINF Remove TRLAN Adapter Information
RMVTRC Remove Trace
RMVWSE Remove Work Station Entry
RNMCNNLE Rename Connection List Entry
RNMDKT Rename Diskette
RNMDLO Rename Document Library Object
RNMM Rename Member
RNMOBJ Rename Object
ROLLBACK Rollback
RPLDOC Replace Document
RRTJOB Reroute Job
RSMBKP Resume Breakpoint
RSMCTLRCY Resume Controller Recovery
RSMDEVRCY Resume Device Recovery
RSMLINRCY Resume Line Recovery
RSMNWIRCY Resume Network Interface Recovery
RSTAUT Restore Authority
RSTCAL Restore Calendar
RSTCFG Restore Configuration
RSTDLO Restore Document Library Object
RSTLIB Restore Library
RSTLICPGM Restore Licensed Program
RSTOBJ Restore Object
RSTS36F Restore System/36 File
RSTS36FLR Restore System/36 Folder
RSTS36LIBM Restore System/36 Library Members
RSTS38AUT Restore System/38 Authority
RSTUSRPRF Restore User Profiles
RTVAUTLE Retrieve Authorization List Entry
RTVCFGSRC Retrieve Configuration Source

72 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
RTVCFGSTS Retrieve Configuration Status
RTVCLDSRC Retrieve C Locale Description Source
RTVCLNUP Retrieve Cleanup
RTVCLSRC Retrieve CL Source
RTVDOC Retrieve Document
RTVDTAARA Retrieve Data Area
RTVGRPA Retrieve Group Attributes
RTVJOBA Retrieve Job Attributes
RTVJRNE Retrieve Journal Entry
RTVLIBD Retrieve Library Description
RTVMBRD Retrieve Member Description
RTVMSG Retrieve Message
RTVNETA Retrieve Network Attributes
RTVOBJD Retrieve Object Description
RTVPDGPRF Retrieve Print Descriptor Group Profile
RTVPWRSCDE Retrieve Power On/Off Schedule Entry
RTVQMFORM Retrieve Query Management Form
RTVQMQRY Retrieve Query Management Query
RTVSYSVAL Retrieve System Value
RTVUSRPRF Retrieve User Profile
RUNQRY Run Query
RVKACCAUT Revoke Access Code Authority
RVKOBJAUT Revoke Object Authority
RVKUSRPMN Revoke User Permission
SAVCAL Save Calendar
SAVCHGOBJ Save Changed Object
SAVDLO Save Document Library Object
SAVLIB Save Library
SAVLICPGM Save Licensed Program
SAVOBJ Save Object
SAVSAVFDTA Save Save File Data
SAVSECDTA Save Security Data
SAVSTG Save Storage
SAVSYS Save System
SAVS36F Save System/36 File
SAVS36LIBM Save System/36 Library Members
SBMDBJOB Submit Database Jobs
SBMDKTJOB Submit Diskette Jobs
SBMFNCJOB Submit Finance Job
SBMJOB Submit Job
SBMNETJOB Submit Network Job
SBMRJEJOB Submit RJE Job
SBMRMTCMD Submit Remote Command
SBMRTLPGM Submit Retail Program
SETATNPGM Set Attention Program
SETKBDMAP Set Keyboard Map
SETMSTK Set Master Key
SETOSIATR Set OSI Attributes
SETPGMINF Set Program Information
SIGNOFF Sign Off

Appendix. AS/400 Control Language Commands 73

Command Descriptive Name
SLTCMD Select Command
SNDBRKMSG Send Break Message
SNDDOC Send Document
SNDDST Send Distribution
SNDDSTQ Send Distribution Queue
SNDEMLIGC Send DBCS 3270PC Emulation Code
SNDF Send File
SNDFNCIMG Send Finance Diskette Image
SNDJRNE Send Journal Entry
SNDMGRDTA Send Migration Data
SNDMSG Send Message
SNDNETF Send Network File
SNDNETMSG Send Network Message
SNDNETSPLF Send Network Spooled File
SNDPGMMSG Send Program Message
SNDPTFORD Send Program Temporary Fix Order
SNDRCVF Send/Receive File
SNDRPY Send Reply
SNDRTLF Send Retail File
SNDRTLRCD Send Retail Record
SNDSRVRQS Send Service Request
SNDTIEF Send Technical Information Exchange File
SNDUSRMSG Send User Message
STRAPF Start Advanced Printer Function
STRAPW Start Advanced Print Writer
STRBAS Start Basic
STRBASPRC Start Basic Procedure
STRBGU Start Business Graphics Utility
STRCBLDBG Start COBOL Debug
STRCGU Start CGU
STRCLNUP Start Cleanup
STRCMTCTL Start Commitment Control
STRCPYSCN Start Copy Screen
STRCSP Start CSP/AE Utilities
STRDBG Start Debug
STRDBRDR Start Database Reader
STRDFU Start DFU
STRDKTRDR Start Diskette Reader
STRDKTWTR Start Diskette Writer
STRDSKCOL Start Disk Data Collection
STREDU Start Education
STREML3270 Start 3270 Display Emulation
STREPMENV Start EPM Environment
STRFMA Start Font Management Aid
STRIDD Start Interactive Data Definition Utility
STRIDXSCH Start Index Search
STRITF Start Interactive Terminal Facility
STRJOBTRC Start Job Trace
STRJRNAP Start Journal Access Path

74 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
STRJRNPF Start Journal Physical File
STRKPF Start Kanji Printer Function
STRMOD Start Mode
STROFC Start Office
STROSINL Start OSI Network Resource
STRPASTHR Start Pass-Through
STRPCCMD Start PC Command
STRPCO Start PC Support Organizer
STRPDM Start Programming Development Manager
STRPFRG Start Performance Graphics
STRPFRMON Start Performance Monitor
STRPFRT Start Performance Tools
STRPGMMNU Start Programmer Menu
STRPJ Start Prestart Jobs
STRPPW Start Page Printer Writer
STRPRTEML Start Printer Emulation
STRPRTWTR Start Printer Writer
STRQMPRC Start Query Management Procedure
STRQMQRY Start Query Management Query
STRQRY Start Query
STRQST Start Question and Answer
STRREXPRC Start REXX Procedure
STRRJECSL Start RJE Console
STRRJERDR Start RJE Reader
STRRJESSN Start RJE Session
STRRJEWTR Start RJE Writer
STRRLU Start Report Layout Utility
STRRMTSPT Start Remote Support
STRSAM Start Sampled Address Monitor
STRSAMCOL Start Sampled Address Monitor Data Col-
lection
STRSBS Start Subsystem
STRSCHIDX Start Search Index
STRSDA Start SDA
STRSEU Start SEU
STRSPTN Start Support Network
STRSQL Start Structured Query Language
STRSRVJOB Start Service Job
STRSST Start System Service Tools
STRS36 Start System/36
STRS36MGR Start System/36 Migration
STRS36PRC Start System/36 Procedure
STRS38MGR Start System/38 Migration
STRTCPFTP Start TCP/IP File Transfer Protocol
STRTCPLNK Start TCP/IP Link
STRTCPTELN Start TCP/IP TELNET
STRTIESSN Start Technical Information Exchange
Session
STRWP Start Word Processing
TFRBCHJOB Transfer Batch Job

Appendix. AS/400 Control Language Commands 75

Command Descriptive Name
TFRCTL Transfer Control
TFRGRPJOB Transfer to Group Job
TFRJOB Transfer Job
TFRPASTHR Transfer Pass-Through
TFRSECJOB Transfer Secondary Job
TRCCSP Trace CSP/AE Application
TRCICF Trace ICF
TRCINT Trace Internal
TRCJOB Trace Job
TRCOSIASN Trace OSI Associations
TRCOSIPCL Trace OSI Protocols
TRCREX Trace REXX
TRNPIN Translate Personal Identification Number
UPDDTA Update Data
VFYCMN Verify Communications
VFYLNKLPDA Verify Link supporting LPDA-2
VFYMSTK Verify Master Key
VFYPIN Verify Personal Identification Number
VFYPRT Verify Printer
VFYTAP Verify Tape
VFYTCPCNN Verify TCP/IP Connection
VRYCFG Vary Configuration
WAIT Wait
WRKACTJOB Work with Active Jobs
WRKALR Work with Alerts
WRKALRD Work with Alert Descriptions
WRKALRTBL Work with Alert Tables
WRKAUTL Work with Authorization Lists
WRKCFGL Work with Configuration Lists
WRKCFGSTS Work with Configuration Status
WRKCHTFMT Work with Chart Formats
WRKCLS Work with Classes
WRKCMD Work with Commands
WRKCNNL Work with Connection Lists
WRKCNNLE Work with Connection List Entries
WRKCNTINF Work with Contact Information
WRKCOSD Work with Class-of-Service Descriptions
WRKCSI Work with Communications Side Informa-
tion
WRKCTLD Work with Controller Descriptions
WRKDBFIDD Work with DB Files Using IDDU
WRKDDMF Work with Distributed Data Management
Files
WRKDEVD Work with Device Descriptions
WRKDEVTBL Work with Device Tables
WRKDIR Work with Directory
WRKDOC Work with Documents
WRKDOCLIB Work with Document Libraries
WRKDOCPRTQ Work with Document Print Queue

76 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
WRKDPCQ Work with DSNX/PC Distribution Queues
WRKDSKSTS Work with Disk Status
WRKDSTL Work with Distribution Lists
WRKDSTQ Work with Distribution Queue
WRKDTAARA Work with Data Areas
WRKDTADCT Work with Data Dictionaries
WRKDTADFN Work with Data Definitions
WRKDTAQ Work with Data Queues
WRKEDTD Work with Edit Descriptions
WRKF Work with Files
WRKFCNARA Work with Functional Areas
WRKFCT Work with Forms Control Table
WRKFLR Work with Folders
WRKFNTRSC Work with Font Resources
WRKFORMDF Work with Form Definitions
WRKGSS Work with Graphics Symbol Sets
WRKHDWPRD Work with Hardware Products
WRKHDWRSC Work with Hardware Resources
WRKJOB Work with Job
WRKJOBD Work with Job Descriptions
WRKJOBQ Work with Job Queue
WRKJRN Work with Journal
WRKJRNA Work with Journal Attributes
WRKJRNRCV Work with Journal Receivers
WRKLIB Work with Libraries
WRKLIBPDM Work with Libraries Using PDM
WRKLIND Work with Line Descriptions
WRKMBRPDM Work with Members Using PDM
WRKMNU Work with Menus
WRKMODD Work with Mode Descriptions
WRKMSG Work with Messages
WRKMSGD Work with Message Descriptions
WRKMSGF Work with Message Files
WRKMSGQ Work with Message Queues
WRKNAMSMTP Work with Names for SMTP
WRKNETF Work with Network Files
WRKNETJOBE Work with Network Job Entries
WRKNWID Work with Network Interface Description
Command
WRKOBJ Work with Objects
WRKOBJCSP Work with Objects for CSP/AE
WRKOBJLCK Work with Object Locks
WRKOBJOWN Work with Objects by Owner
WRKOBJPDM Work with Objects Using PDM
WRKORDINF Work with Order Information
WRKOSIABSN Work with OSI Abstract Syntaxes
WRKOSIADJN Work with OSI Adjacent Nodes
WRKOSIAGTR Work with OSI Agent Registrations
WRKOSIAPPE Work with OSI Application Entities
WRKOSIAPPM Work with OSI Application Modes

Appendix. AS/400 Control Language Commands 77

Command Descriptive Name
WRKOSIAPPX Work with OSI Application Context
WRKOSIAUNN Work with OSI Authority Nicknames
WRKOSICLPS Work with OSI Connectionless-Mode Path
Sets
WRKOSICMPS Work with OSI Connection-Mode Path
Sets
WRKOSIDUAR Work with OSI Directory User Agent Reg-
istrations
WRKOSIIX25 Work with OSI Inbound X.25 Attributes
WRKOSILINE Work with OSI Lines
WRKOSILINS Work with OSI Line Sets
WRKOSIMGRR Work with OSI Manager Registration
WRKOSINSAP Work with OSI NSAP Addresses
WRKOSIOX25 Work with OSI Outbound X.25 Attributes
WRKOSIQOSM Work with OSI X.25 QOS Modes
WRKOSIRTE Work with OSI Routes
WRKOSISSEL Work with OSI Local Service Access Point
Selectors
WRKOSISUBN Work with OSI Subnetworks
WRKOSITPTM Work with OSI Transport Modes
WRKOUTQ Work with Output Queue
WRKOUTQD Work with Output Queue Description
WRKOVL Work with Overlays
WRKPAGDFN Work with Page Definitions
WRKPAGSEG Work with Page Segments
WRKPFRCOL Work with Performance Collection
WRKPGM Work with Programs
WRKPGMTBL Work with Program Tables
WRKPNLGRP Work with Panel Groups
WRKPRB Work with Problem
WRKPRDINF Work with Product Information
WRKPRTSTS Work with Printing Status
WRKQMFORM Work with Query Management Form
WRKQMQRY Work with Query Management Query
WRKQRY Work with Query
WRKQST Work with Questions
WRKRDR Work with Readers
WRKRJESSN Work with RJE Session
WRKRPYLE Work with System Reply List Entries
WRKRTLCMN Work with Retail Communications
WRKRTLCVN Work with Retail Conversions
WRKRTLTPL Work with Retail Templates
WRKSBMJOB Work with Submitted Jobs
WRKSBS Work with Subsystems
WRKSBSD Work with Subsystem Descriptions
WRKSBSJOB Work with Subsystem Jobs
WRKSCHIDX Work with Search Indexes
WRKSCHIDXE Work with Search Index Entries
WRKSHRPOOL Work with Shared Storage Pools

78 AS/400 System/36-AS/400 Command Cross-

Reference
Command Descriptive Name
WRKSOC Work with Sphere of Control
WRKSPADCT Work with Spelling Aid Dictionaries
WRKSPLF Work with Spooled Files
WRKSPLFA Work with Spooled File Attributes
WRKSPTPRD Work with Supported Products
WRKSRVPVD Work with Service Providers
WRKSRVRQS Work with Service Requesters
WRKSSND Work with Session Description
WRKSYSACT Work with System Activity
WRKSYSSTS Work with System Status
WRKSYSVAL Work with System Values
WRKTBL Work with Tables
WRKTCPSTS Work with TCP/IP Network Status
WRKTIE Work with Technical Information
Exchange
WRKTRA Work with TRLAN Adapters
WRKTXTPRF Work with Text Profiles
WRKUSRJOB Work with User Jobs
WRKUSRPRF Work with User Profiles
WRKUSRTBL Work with User Tables
WRKWTR Work with Writers

Appendix. AS/400 Control Language Commands 79

IBM 

Program Number: 5763-SS1

Printed in U.S.A.

SX41-3732-ðð