See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/332176742

Analysis and Design of Box Culvert: A Manual Approach

Article · March 2019

DOI: 10.22161/ijaers.6.3.37

CITATIONS READS

6 12,184

2 authors, including:

Sagar Jamle
SKM Steels LTD.
73 PUBLICATIONS   994 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Costonomical Concrete View project

Stability Enhancement Systems View project

All content following this page was uploaded by Sagar Jamle on 26 June 2019.

The user has requested enhancement of the downloaded file.

International Journal of Advanced Engineering Research and Science (IJAERS) [Vol-6, Issue-3, Mar- 2019]
https://dx.doi.org/10.22161/ijaers.6.3.37 ISSN: 2349-6495(P) | 2456-1908(O)

Analysis and Design of Box Culvert: A Manual

Approach
Roshan Patel1, Sagar Jamle2
1 MTech. Scholar, Department of Civil Engineering, Oriental University, Indore (M. P.), India
Email: [email protected]
2 Assistant Professor, Department of Civil Engineering, Oriental University, Indore (M. P.), India

Email: [email protected] m

Abstract— Box culverts are the monolithic structure Box culverts which have four corners are monolithically
made to pass across a roadway, railway lines etc. jointed. In other cases the box will be of three sides
Embankments are used to balance the flood water on both means which has bottom slab (Raft) and vertical walls.
sides. Box takes various types of loads generated by Top slab needed to be made otherwise precast slab also
water, traffic, cushion, soil etc. This work deals with available in market we cannot joint it monolithically.
complete design of box culvert manually and study the Cushioning is very important in every box culvert which
design parameters such as effect of earth pressure, depth decided by road profile and bearing capacity of soil
of cushion at the top slab of culvert, factor such as available at site.
braking force, Impact load, Live load, Dispersal of load
through tracked or wheeled vehicle, effective width etc. In II. TYPES OF BOX CULVERTS
this work, study of culvert with and without cushion 1) According to the Classification by Materials
analyzed for different classes of IRC loadings and 1.1) Concrete
conclusions made on the basis of bending moments and 1.2) Steel
shear forces with and without cushioning cases. This 1.3) Aluminum
paper provides full discussion of provisions provided by 1.4) Plastic
Indian Standards, their justifications and considerations 1.5) High density Polyethylene
are taken into the account for design purpose. 1.6) Timber
Keywords— Box culvert, Cushioning, Loading class, 2) According to the Classification by Shape
Moment calculations, Percent reinforcement, Pressure 2.1) Box culvert
cases, Side walls, Top slab. 2.2) Pipe culvert
2.3) Pipe arch culvert
I. INTRODUCTION 2.4) Bridge culvert
Box culverts are low rise bridge or structure which is used 2.5) Arch culvert
to discharge water in the proper channel in crossing of 3) According to the Classification by Loading as per
railway, flyover, roads etc. and is used where the bearing IRC
capacity of soil is low. Culverts are always economical 3.1) IRC-CLASS-70 R
than bridge where the discharge in the opening is 18 m2 it 3.2) IRC-CLASS-A
depends on the number of cells which is generally used 3.3) IRC-CLASS-B
where roadway crosses the high embankment. Box
culverts are generally cast in situ in India, but in other 3.1) IRC-CLASS-70 R: - It is a loading which used by the
countries the box culverts are preferred due to low cost municipality which includes industrial areas along with
and economically with having fast workmanship. The box major highways, bridges culverts etc. For military heavy
is just name given for its shape, can be found in various loads vehicles, the bridge, culverts designed for Class-A
types of shapes and also it can be act as minor bridge and also for Class-B. It should be checked for Class-A
when the number of cells increases and span greater than loading because there will be heavy stresses created under
6m in length. Its height depends on span. It can control all Class-A loadings. As per IRC 6, the value for Class 70 R
water coming from irrigation, surface water, river and provided is 350 KN for tracked vehicle.
canals they control all the storm water and flood water 3.2) IRC-CLASS-A: - This loading is preferred on each
during rainy season. and every roads on which permanent structures are made

www.ijaers.com Page | 286

International Journal of Advanced Engineering Research and Science (IJAERS) [Vol-6, Issue-3, Mar- 2019]
https://dx.doi.org/10.22161/ijaers.6.3.37 ISSN: 2349-6495(P) | 2456-1908(O)
such as bridges, culverts etc. As per IRC 6, the value for Steel grade Fe 500
Class A provided is 114 KN for wheeled vehicle. Esc(concrete) 8.33Mpa
3.3) IRC-CLASS-B: - This loading is preferred on each Esc(steel) 200 Mpa
and every road on which temporary structures are made Cushion depth 3.5m
and for bridges the different materials are used respect to Modular ratio 10
situations. As per IRC 6, the value for Class B provided is n (for depth of neutral axis) 0.294
68 KN for wheeled vehicle. j (for effective depth) 0.902
k (for moment of resistance) 1.105
III. CASES TO BE SOLVED & PARAMETERS
USED
For this work, total six cases are taken for analysis and
design. For that each case is numbered as Case A, Case B,
etc. Description for Without Cushion and With Cushion
cases are mentioned in table 1.

Table.1:- Types of cases used with description as per

loading class
Cushion
Cases Description
Type
CASE 350 KN of Tracked vehicle
A using Class-70(R)
Without CASE 114 KN of Wheeled vehicle is
Cushion B using Class-A Fig.1: Box culvert without cushion
CASE 68 KN of Wheeled vehicle is
C using Class-B
CASE 350 KN of Tracked vehicle
D using Class-70(R)
With CASE 114 KN of Wheeled vehicle is
Cushion E using Class-A
CASE 68 KN of Wheeled vehicle is
F using Class-B

For this work, parametric values taken for analysis and

designing of box culvert. Description for both Without
Cushion and With Cushion cases are mentioned in table
2.

Table.2:- Parameters used for designing Fig.2: Box culvert with cushion
Parameters Values
Clear span 3m IV. METHODOLOGY AND PROBLEM SOLVING
Clear height 3m APPROACH STEPS
1) Design steps without cushion:-
Top slab thickness 0.3m
1.1) Silent Features
Bottom slab thickness 0.35m
1.2) Load Calculations
Side wall thickness 0.35m
1.2.1) Top slab
Unit weight of concrete 25 KN/m3
1.2.2) Bottom slab
Unit weight of earth 18kN/m3
1.2.3) Total load
Unit weight of water 10kN/m3
1.3) Moment Calculations
Coefficient of earth pressure at rest 0.5
1.3.1) Top Slab
Types of cushioning With/Without 1.3.2) Bottom Slab
Thickness of wearing coat 0.070m 1.3.3) Side Walls
Carriageway 8 lane divided 1.4) Distribution Factors
Concrete grade M 25

www.ijaers.com Page | 287

International Journal of Advanced Engineering Research and Science (IJAERS) [Vol-6, Issue-3, Mar- 2019]
https://dx.doi.org/10.22161/ijaers.6.3.37 ISSN: 2349-6495(P) | 2456-1908(O)
1.5) Moment Distribution
Impact Load
1.5.1) Fixed end moment due to dead load
(KN)
1.5.2) Fixed end moment due to live load 100 91.25

1.5.3) Fixed end moment due to total load 90

80
1.6) Braking Force
70
1.6.1) Load: 70 R (T)
60
1.6.2) Moment due to Braking Force
50
1.7) Design of Section 40
1.7.1) Top Slab 30 21.63

1.7.2) Bottom slab 20 10.86

1.7.3) Side Walls 10

0
Class 70 R Class A Class B
2) Design steps with cushion:- Impact Load
2.1) Silent Features
2.2) Load Calculations Graph 1:- Graphical representation of values of Impact
2.2.1) Top slab Load
2.2.2) Bottom slab 2) Braking force
2.2.3) Total load
2.3) Moment Calculations Table 4:-Values of Braking Forces
2.3.1) Top Slab Class 70-(R) Class A Class B
Non Loading Loading Loading
2.3.2) Bottom Slab
Cushion
2.3.3) Side Walls 54.52kN 17.13kN 10.59kN
2.4) Distribution Factors
2.5) Moment Distribution
2.5.1) Fixed end moment due to dead load Braking Force
(KN)
2.5.2) Fixed end moment due to live load 56.3
60
2.5.3) Fixed end moment due to total load
2.6) Design of Section 50

2.6.1) Top Slab 40

2.6.2) Bottom slab
30
2.6.3) Side Walls
17.13
20
10.59
V. RESULT AND DISCUSSIONS
10
1) Impact load
0
Class 70 R Class A Class B
Table 3:- Values of Impact Loads
Braking Force
Class 70-(R) Class A Class B
Non Loading Loading Loading Graph 2:- Graphical representation of values of Braking
Cushion Forces
91.25kN 21.63kN 10.86kN 3) Bending moment of structure
Without-Cushioning:
Table 5:-Values of Bending Moments (Without-Cushion)
Classes
Locatio Member
Item 70-
n s A B
(R)
M AB,M B
103.7 41.0
A ,M AD ,M 29.69
Bending 4 4
DC
Moment Support
M DC,M C
s 43.2
D ,M DA ,M 70.94 38.58
(kN.m) 6
CB

Mid M AB,M B 85.54 25.9 16.91

www.ijaers.com Page | 288

International Journal of Advanced Engineering Research and Science (IJAERS) [Vol-6, Issue-3, Mar- 2019]
https://dx.doi.org/10.22161/ijaers.6.3.37 ISSN: 2349-6495(P) | 2456-1908(O)
Span A 2 from top
M DC,M C 32.2 slab for
41.75 26.38
D 1 wall
M AD ,M D 18.2 At d eff
26.12 10.54
A 6 from
bottom D&C 29.61 29.69 28.69
With Cushioning: slab for
wall
Table 6:-Values of Bending Moments (With-Cushion)
Classes With Cushioning:
Locatio Member
Item 70- Table 8:-Values of Shear Force (With Cushion)
n s A B
(R) Classes
Item Location Members
M AB,M BA 70-(R) A B
55. 54.5
,M AD ,M D 57.67 At d eff A&B 88.26 83.49 82.61
03 6
Suppor C from
t M DC,M CD support D&C 104.36 99.46 98.52
64. 65.2 for slab
Bending ,M DA ,M C 67.54
63 2 At d eff
Moment B
s from top
52. 53.5 Shear A&B 71.74 70.16 69.26
( kN.m) M AB,M BA 56.15 slab for
78 0 Force
wall
Mid 66. 64.9 (kN)
M DC,M CD 69.43 At d eff
Span 40 0
from
M AD ,M D 20. 19.9
17.23 bottom D&C 77.21 74.23 73.54
A 01 5
slab for
wall
Be nding Moment
(KNm)
120
She ar Force
(KN)
100 140

80 Class 70 R (NC) 120

Class A (NC)
60 100
Class B (NC) Class 70 R (NC)

Class 70 R (C) 80 Class A (NC)

40
Class A (C) Class B (NC)
60
20 Class B (C) Class 70 R (C)
40
Class A (C)
0
Support 1 Support 2 Mid Span 1 Mid Span 2 Mid Span3 20 Class B (C)

0
Slab 1 Slab 2 Wall 1 Wall 2
Graph 3:- Graphical representation of values of Bending
Moments (Without and With Cushion)
Graph 4:- Graphical representation of values of Shear
4) Shear force of structure Force (Without and With Cushion)
Without Cushioning:
Table 7:-Values of Shear Forces (Without-Cushion) 5) Steel percentage
Classes Without -Cushioning load:
Item Location Members 70- Table 9:-Values of Steel Percent (Without-Cushion)
A B Top Bottom Side
(R) Classes
At d eff from A&B 115.8 37.35 24.43 slab slab wall
Shear support for 70-(R) loading 0.63 0.43 0.25
D&C 49.45 42.14 37.51 A-loading 0.38 0.38 0.23
Force slab
(kN) At d eff A&B 40.18 39.89 39.31 B-loading 0.30 0.34 0.21

www.ijaers.com Page | 289

International Journal of Advanced Engineering Research and Science (IJAERS) [Vol-6, Issue-3, Mar- 2019]
https://dx.doi.org/10.22161/ijaers.6.3.37 ISSN: 2349-6495(P) | 2456-1908(O)
With Cushioning load: 7. The total deformations of box full without cushion
condition are more than box full with cushion
Table 10:-Values of Steel Percent (With Cushion) conditions. The normal stress, maximum principle
Top Bottom Side stress and equivalent stress are without cushion is
Classes
Slab Slab Wall more than with cushion.
70-(R) loading 0.35 0.41 0.27 8. For Shear force values, class 70 R loading gives
A-loading 0.33 0.40 0.24 maximum values for top slab, bottom slab and side
B-loading 0.33 0.40 0.23 walls for non cushion cases. Comparing shear force
values for cushion cases, again Class 70 R shows
maximum values. Class B shows minimum shear
Ste el Percentage
(%) force values for both cushion and non cushion cases
0.7 in top slab, bottom slab and side walls.
0.6

0.5 Class 70 R (NC)

ACKNOWLEDGEMENT
0.4 Class A (NC)
I manifest my faithful felicitation and regards to my
0.3 Class B (NC) project coordinator Mr. Sagar Jamle, Assistant Professor
0.2
Class 70 R (C) and Head, Department of Civil Engineering, Oriental
0.1
Class A (C) University Indore for his precious comments throughout
Class B (C)
0
support and encouragement I would like to thank him for
Top Slab Bottom Slab Side Walls different innovative ideas with respect to today’s
engineering.
Graph 5:- Graphical representation of values of Steel
Percent (Without and With Cushion) REFERENCES
[1] A. D. Patil, A.A. Galatage (2016), " Analysis of box
VI. CONCLUSIONS AND RECOMMENDATIONS culvert under cushion loading ", International
1. By using manual calculations as per IRC rules, the advanced research journal in science, engineering
design and analysis of box has thoroughly done. By &technology, ISSN no.(o)2393-8021, ISSN no.(p)
using the manual calculation, we can easily find out 2394-1588, Vol.03, Issue-03, p.p. 163-166.
the data which is beneficial. [2] Afzal Hamif Sharif (2016), "Review paper on
2. Small variations in coefficient of earth pressure analysis and design of railway box bridge"
observed have very small influence on design of box International journal of scientific development &
culverts without cushioning. It is easy to judge the research, ISSN no.2455-2631, Vol.01, Issue-07, p.p.
variations observed in percent as per different classes 204-207.
of loading. [3] Ajay R. Polra, Pro. J.P Chandresha, Dr. K.B Parikh
3. When Cushioning is not used, Impact Values are (2017), " A review paper on analysis and cost
observed as 91.25 KN, 21.63 KN & 10.86 KN for comparison of box culvert for different aspect of cell
Class 70 R, Class A & for Class B respectively. " International journal of engineering trends &
Values of Braking Forces seem to be 56.30 KN, technology, ISSN no.2231-5381, Vol.44, Issue-03, p.
17.13 KN & 10.59 KN for Class 70 R, Class A & for p 112-115.
Class B respectively. [4] Ayush Tiwari, Dr. Sudhir S. Bhadouria (2017),"
4. For box culvert which is without cushion braking Comparative cost evaluation of R.C.C box and solid
force is required to consider for small spans. It is slab " International journal for scientific research&
easy to widen the box length when required. development, ISSN no. 2321-0613, Vol.05, Issue-08,
5. Comparing different loading cases, class 70 R p.p. 365-367.
loading gives maximum B. M. at support with and [5] B. Sravanthi, G. Ramakrishnadr, M. kameshwara
without cushioning cases. Least values are observed Rao(2015), "A comparative design of one cell and
in Class B for the same. Again, mid span moment twin cell R.C.C. box type minor bridge "
values are greater in 70 R class loading comparing to International journal for scientific research &
least values observed in Class B loading. development, ISSN no.2321-0613, vol.03,Issue-06,
6. At upstream and downstream there will be apron p.p. 504-506.
floor that should be provided with level to be [6] Ketan Kishor Sahu, Shraddha Sharma (2015),
maintained and also haunches should be provided at "Comparison & study of different aspect of box
edge of box. culvert" International journal of scientific research &

www.ijaers.com Page | 290

International Journal of Advanced Engineering Research and Science (IJAERS) [Vol-6, Issue-3, Mar- 2019]
https://dx.doi.org/10.22161/ijaers.6.3.37 ISSN: 2349-6495(P) | 2456-1908(O)
development, ISSN no.2321-0613, Vol.03, Issue-07, reinforcement concrete U shaped box culvert using
p.p. 167-175. abaqus" American journal of civil engineering,
[7] Mahesh D. Kakade, Rajkuwar A. Dubai (2017), " A Vol.06, Issue-05, p.p. 162-166.
study of behavior of R.C.C. box culvert under the
influence of static & dynamic loads in accordance
with IRC " International research journal of
engineering and technology , ISSN no.(o) 2395-0056,
ISSN no.(p) 2395-0072, Vol.04, Issue-10, p.p. 30-35.
[8] M. Bilal khan, M. Parvez alam (2015)," Hydraulic
design of box culvert for highway at coastal region"
International journal of advanced in engineering
research, ISSN no.2231-5152, Vol.09, Issue-02, p. p
31-40.
[9] Neha Kolate, Molly Mathew, Snehal Mali (2014),
"Analysis and design of R.C.C. box culverts"
International journal of scientific & engineering
research, ISSN no.2229-5518, Vol.05, Issue-12, p.p.
36-41.
[10] Saurav, Ishaan pandey (2017), "Economic design of
box culvert through comparative study of
conventional and FEM " International journal of
engineering & technology, ISSN no.(o) 0975-4024,
ISSN no.(p) 2319-8613, Vol.09, Issue-03, p.p.-1707-
1703.
[11] Sujata Shreedhar, R. Shreedhar (2013)," Design
coefficients for single and two cell box culvert"
International journal of civil & structural
engineering, ISSN no.0976-4399, Vol.03, Issue-03 ,
p.p. 475-494.
[12] Vaishali Turai, Ashish Waghmare (2016)," A study
of cost comparison of precast concrete v/s cast in
place concrete" International journal of advanced
engineering research & application, ISSN no.2454-
2377, Vol.02, Issue-02,p.p. 112-122.
[13] Vasu Shekhar Tanwar, M.P Verma, Sagar Jamle
(2018)," Analytic study of box culvert to reduce
bending moments and displacements values"
International journal of current engineering
technology, ISSN no.(o) 2277-4106, ISSN no.(p)
2347-5161, Vol.08, Issue-03, p.p. 762-764.
[14] Vasu Shekhar Tanwar, M.P Verma, Sagar Jamle
(2018),"Analysis of box culvert to reduce stress
value" International journal of advanced engineering
& science, ISSN no.(o) 2456-1908, ISSN no.(p)
2349-6495, Vol.05, Issue-05, p. p 01-04.
[15] Virendra Singh, D. Chauhan, Gunvant Solanki, Minu
Tressa (2017), " Analysis & design of box type
multibareel skew culvert " International journal of
advance engineering & research, ISSN no.(o) 2348-
4470, ISSN no.(p) 2348-6406, Vol.04, Issue-11, p.p.
396-398.
[16] Zengabriel Gebremedhn, Guofu Qiao ( 2018)," Finite
element modeling & analysis of precast

www.ijaers.com Page | 291

View publication stats