Waterproof Weighing Indicator Usage Manual

Weighing Indicator

Operation Instruction

Model:XK3119WL-II(LCD/LED)
 Waterproof Weighing Indicator Usage Manual

Content

I． INSTRUCTION…………………........……….………….1
II. TECHNICAL FEATURES……………..…. ….……..….1
III. MAIN FUNCTIONS ……………………………..………1
IV. KEYBOARD FUNCTION……………………….........…2
V. BASIC INFORMATION SETTING……………......……3
VI. GENERAL PARAMETER SETTING………….....….....4
VII. CALIBRATION……………………………………......…6
VIII. CONFIGRATION SETTING………..……………….….7
IX. COUNTING FUNCTION ….….…….……….…..….….9
X. ERROR SIGNAL…………………………….………...10
XI. PRINTER FORMAT…………………………...………11
XII. INTERFACE CONNECTION………………….……..11
XIII. MAINTAINCE AND NOTES…………………..……..12
XIV. WARRANTY…………………………………....……..12
 Waterproof Weighing Indicator Usage Manual
I. INSTRUCTION
XK3119WL-II (LCD/LED) indicator is an enhanced small indicator which consist of advanced
microprocessor making it a more reliable, stable, faster weighing speed and easy to operate. With
waterproof and insect prevention structure feature. The indicator is best used for industrial platform scales,
floor scales and various weighing machineries and equipment.

II. TECHNICAL FEATURES

1. Accuracy class: III
2. Sampling rate:5~40 times/second
3. Max. division: n=15000
4. Load cell supply current:<200mA
5. Load cell input voltage: DC 0Mv~ DC 16mV
6. Load cell min. resolution: 0.1Uv
7. Communication interface: RS232 output & RS232 print-out interface
8. Communication interface: RS485 or bluetooth 2.0 out put (optional)
9. Optical isolation external control output: 3 road , 36v 100mV control switch
10.Time display: year/month/day/ & hrs/mins/second selectable.
11. Supply power: AC/DC 12V 500mA adaptor
DC 6V/1.2Ah rechargeable battery
12. Power dissipation:0.1VA
13. Working temperature: 0℃ ~ 40℃
14. Working humidity: ≤ 95%RH
15.Size: 208x108x78mm
16. Total weight(with rechargeable battery): 1.26kg

III. MAIN FUNCTIONS

1.Keyboard calibration by hand, capacity will be set automatically.
2.Error message will be shown automatically.
3.Auto power saving mode and auto power off mode.
4.Date and time display setting and multi saving power display.
5.Charging indication and auto-off when voltage is too low.
6.Multiple weighing units: kg, lb, Hl, t, g.
7.Selectable RS232 and RS485 serial port (Bluetooth 2.0, WIFI, 2.45G module selectable).
8.Vibration and shaking filtering mode.
9.Automatic recovery with data restore, strong anti-interference.
10.Able to set decimal position, max. capacity and division.
11.Auto zero tracking, zero error indication and overload warning.
12.Built-in weight alarm setting function.
13.Display of basic information while turning on the indicator (company name, time, version, power
percent ect)

1
 Waterproof Weighing Indicator Usage Manual
IV. KEYBOARD FUNCTION

Display symbol:
Stable indication Kg, lb, t, g Weigh units
TR
Tare mode Gross weight

→0← Zero indication Net weight

Charging light Low Battery

The reading is Freezing with
HOLD HI/OK/LO Check weighing indication
animal weigh function

LCD indicator Keyboard Panel

LED indicator Keyboard Panel

2
 Waterproof Weighing Indicator Usage Manual

Power ON/OFF switch key. Press and hold the key for 1.5 seconds, it will self-test till
weight zero appearance.

Deduct the container weight. Press this key to deduct the container weight and then display
net weight, tare indication light on.

To re-zero the scale. Range of re-zero is ±2% of full scale.

* Weigh units switch while in weighing mode. Press to choose the desired weight units.
* ON/OFF backlight key while in weighing mode (for LCD indicator), press and hold for
1.5 seconds to turn on /off the backlight .
* Press to confirm the setting when it is in setting menu or calibration mode.
* Recall the memory of accumulative counts and weights, accumulative counts and weights
will display on the screen. Press to clear accumulative weight and time.
* Selective key when in setting menu.

* Press the key to print out the current weight (only allow one time to print out the current
weights), accumulative counts and weights will be shown. Note: this function work while
connecting printer. * Selective key when in setting menu.

V.BASIC INFORMATION SETTING

Please press and hold and keys together for 3 second until it displays “= = = = = =”
then release, the parameter in the table below will display on the screen:
1.Press return back the to weight mode.
2.Press enter into basic information setting.

Step Operation Screen Display Remark

01 AV or DC =6.78 Display the current power supply.

02 Press Apt 98% Display current power percent.

AAA = indicator category

03 Press AAABBB (000 = normal model, others for customize)
BBB = version number, 020= VER2.0 version.

04 Press XXXXX Nameplate (number) high 5 digits.

05 Press XXXXX Nameplate (low) high 5 digits.

Display recently effective usage zero.

06 Press 4832
Note: reference for identity load cell damage index.
Display recently effective using calibration rate.
07 Press 36125
Note: used to identify whether calibration or not.
3
 Waterproof Weighing Indicator Usage Manual
08 Press AD XXXX Display current AD inner code.
Press AV = 6.78 Repeat setting above.
09

Press Return back to weight mode.

10

VI. GENERAL PARAMETER SETTING

Please press and hold and keys together for 3 second until it displays “= = = = = =” then
release, the parameter in the table below will display on the screen:
1.Press to confirm the previous parameter and enter into next step.
2.Press to operate previous parameter and to change setting.
Step Operation Screen Display Remark
Auto power off function:
The preset shut down time from 0~60 minutes means indicator will auto
power off if there is no changes on weighing value and no operation on
01 OFF 0
the keyboard.
Choice 0 means auto power off function is not available.
Press to select digit from 0~60.
Buzzer function:
02 Press bd ON
ON = turn on buzzer; OFF = turn off buzzer. Press to select.
Power saving mode:
A for power saving mode; B for the effective time.
For LCD indicator:
A=0 means switching back light by hand, press and hold for 1.5
seconds to turn on/off the back light.
A=1 means light-off while reading is stable;
A=2 means light-off while it is in zero status;
A=3 means light-off after date & time display;
A=4 means light-off after company name, date & time display;
03 Pr AB B=1~9 means the effective time 1~9 minutes, after the time, the
Press backlight mode work.
For LED indicator:
A=0 means no saving mode setting;
A=1 means display shut off, stable indication light on;
A=2 means display shut off, zero indication light on;
A=3 means date & time display;
A=4 means company name, date & time display;
B=1~9 means the effective time 1~9 minutes work.
Press to select digit position and press to set the digit.

High & low limit setting:

Press - HOL - Press skip previous step and enter into next step.
04
Press enter into high & low limit setting.

4
 Waterproof Weighing Indicator Usage Manual
When the “-HI- “ and “00000kg” indication is shining, please set the
highest weight. Once the loaded weight is over the setting highest
Press -HI- / -00000- weight, “HI” symbol indication (default red color) will display.
Press to select digit position and press to set the digit.

When the “-LO- “ and “00000kg” indication is shining, please set the
Press lowest weight. Once the load weight is under the setting lowest weight,
-LO- / -00000-
“-LO-” symbol indication (default purple color) will display.
Note: OC=010 means standard weight (default green color)
Effective term of check weighing mode:
X=0 means keep checking and alert, even if the reading is unstable.
Press X=1 means the indicator will alert after reading is stable.
SPt X
X=2~9 means the indicator will alert when the reading appear same
times as preset the number, it happens in reading is unstable.
Press to set the digit.

Press S-C1 Date & time setting.

year/month/day
Press
05 18.05.29
Press to select digit position and press to set the digit.

Press 13.01.50 hour/minute/second

Auto shutdown protect battery function.

When the capacity of battery is lower than the setting value (0~40), the
06 Press PLO 0 indicator will shutdown, it is very helpfully to increase the life of battery.
Press to select digit position and press to set the digit.

LCD/LED backlight/light brightness display, increase by number(0~9

Press selectable), the larger number, the shorter lifetime.
LCD/LED
07 Press to set the digits from 0~9

Press
0.0 return back to weight mode, LED indicator setting finished.

LCD indicator continue setting as below:

Backlight color setting.
Press - reg -
Press skip previous setting and enter into next step.

C=111 means normal backlight color is light white.

Press C = 111
Press confirm current setting and return back to weight mode.

Red color brightness adjustable.

08 Press r = XXX
r = 0 means red color closed, r = 255 means max. red brightness.
Green color brightness adjustable.
Press g = XXX
g=0 means green color closed, g=255 means max. green brightness.
Blue color brightness adjustable.
Press b = XXX
b=0 means blue color closed, b=255 means max. blue brightness.

5
 Waterproof Weighing Indicator Usage Manual
USB output serial port, press enter into USB setting or press
Press - USB -
skip current step and enter into next setting.

X=0 means USB disk storage function not work.

X=1 means USB disk storage work, Chinese format.
Press
U1=X
X=2 means USB disk storage work, English format.
Press to select digit and press to confirm
09
X=0 means high speed USB disk ( USB 3.0 or new model USB 2.0).
X=1 means normal USB disk (USB 2.0).
Press U2=X
X=2 means low speed USB ( USB 1.0 or old model USB 2.0).
Press to select digit and press to confirm

XX means employee number.

Press P = XX
Press to select digit position and to set the digit.

10 Press 0.0 return back to weight mode, LCD indicator setting finished.

Note: for step NO.09 above:

A.USB disk storage introduction:
1. The file’s name of the USB storage file is the date of the day, CSV is the extension filename.(open with
text or EXCEL).
2. Check whether the file’s name is same as the indicator’s time setting before storage, if different, please
rebuilt.
3. When establish documents, type the company name in Chinese or English. type the item bar.
4. Press , when accumulation finished, the print content will be stored into the USB disk.
B.USB disk storage operation:
1. No matter what value is set by ADS, it only needs to enable USB storage function.
2. Press , after accumulation done, then enter into USB storage operation.
3. When display "S1-USB" means checking and creating the file, the file’s name according the indicator’s
time setting, CSV as the extension file, and write the unit and project information.
4. When display "S2-USB" means writing the current data, the content offered by the customer.
5. When display "S3-USB" means to verify and close the USB writing operation, writing process finished.
6. Storage unit fixed kg(kg) display.
Note: when symbol S1-USB ~ S3-USB display, cannot force to pull out the USB disk, that will damage the
files and data writing will failed.

VII. CALIBRATION
* Plug the circuit breaker JP1 into “on”, and the following operation can be performed.
Please press and hold and keys together for 3 second until it displays “= = = = = =” then
release, the parameter in the table below will display on the screen:
1.Press to confirm the previous parameter and enter into next setp.
2.Press to operate previous parameter and to change setting.
6
 Waterproof Weighing Indicator Usage Manual
Step Operation Screen Display Remark
01 CAL SP Enter into setting mode

02 Press CRL 0 Enter into calibration mode

Entering auto zero calibration, after then indicator show

03 Press ------ the max. capacity

When Max. Capacity weight display, eg:150kg. Load the

test weight (≥1/3 max. Capacity), eg:50kg.

After stable symbol “ ” display, Press to select

04 150.00
digit position and press to set the digits from

0~9.eg:50kg.

Press to confirm.

------ Indicator is waiting to handle the related weight.

05 Press If the weight shown is different to test weight, please

150.00
repeat calibration according above steps.

VIII. CONFIGRATION SETTING

* Plug the circuit breaker JP1 into “on”, and the following operation can be performed.
Please press and hold and keys together for 3 second until it displays “= = = = = =” then
release, the parameter in the table below will display on the screen:
1.Press to confirm the previous parameter and enter into next setp.
2.Press to operate previous parameter and to change setting.

Step Operation Display Remark

01 CAL SP Calibration setting mode

02 Press - SET - Enter into configuration setting.

Division selection. Eg.0.001=1g, 0.01=10g ect.

03 Press d 0.001
Press to choose the desired division value.
Resolution display selection. Max. capacity = n x d (division).
04 Press n 3000
Press to select digit position and press to set the digit.

A means zero range when power on, 1~9 means 10%~90% FS to zero.
05 Press Ut AB B= zero tracking range, 1~9 means 1~9x0.25d for tracking range.
Press to select digit position and press to set the digit.

7
 Waterproof Weighing Indicator Usage Manual
Weight units switch.
Press - UnIt -
Press skip current setting and enter into next step.
Press Un 1 X First unit:0=kg; 1=Lb; 4=g.
06
When first unit=kg to switch, 1=LB; 2=t; 3=HI; 4=g; 5= PCS (counting).
Press Un 2 X When first unit=Lb to switch, 0=kg; 1=Lb; 5= PCS (counting).
When first unit=g to switch, 0=kg; 5= PCS(counting).
Output serial port 0;
Press rs - 0
Press skip current setting and enter into next step.
baud rate setting:2400/9600/14400/19200 selectable
Press bo 9600
Default data position: N, 8, 1

Press ADS. XX r0～r9=RS232 single way transmit data format label.

Press CX C0～C9: Chinese print out format.

Press EX E0～E9: English print out format.

Press rS= HI L0；HI

07
0= continue out put; 1= one time per second;
Press rA= X
2= stable output; 3= out put three times after stable.

Press UOP0.X 0= printer model (default: RD-TH32-SC printer)

Press UOP1.X 0=56mm width thermal paper; 1=32mm width label paper.

Press UOP2.AB 00~99 selectable, default:10; A=paper advance; B=paper return back.

Press UOP3.X 0~9, Print font color; 0=the lightest color, 9=the darkest color.

X=0 means after stable, press key to print out and accumulative data.
Press UOP4.X
X=1 means after stable auto print out and accumulative data.
Press to confirm; Press select position or set digit ; Press to set digit.

Output serial port 1;

Press rs - 1
Press skip current setting and enter into next step.
baud rate setting:2400/9600/14400/19200 selectable
Press b1 9600
Default data position: N, 8, 1

Press ADS. XX r0～r9=RS232 single way transmit data format label.

08
Press CX C0～C9: Chinese print out format.

Press EX E0～E9: English print out format.

8
 Waterproof Weighing Indicator Usage Manual

Press rS= HI L0；HI

0= continue out put; 1= one time per second;

Press rA= X
2= stable output; 3= out put three times after stable.

Press UOP0.X 0= printer model (default: RD-TH32-SC printer)

Press UOP1.X 0=56mm width thermal paper; 1=32mm width label paper.

Press UOP2.AB 00~99 selectable, default:10; A=paper advance; B=paper return back.

Press UOP3.X 0~9, Print font color; 0=the lightest color, 9=the darkest color.

X=0 means after stable, press key to print out and accumulative data.
Press UOP4.X
X=1 means after stable auto print out and accumulative data.
Press to confirm; Press select position or set digit ; Press to set digit.
Recommend to re-start the indicator after rs – 1 setting finished.
X=0 means after stable, press key to print out and accumulative data.
09 Press UoP4. X
X=1 means after stable auto print out and accumulative data.
Indicator ID code (selection range 0~99).
09 Press ID XX
Press and to change the value.
Weighing display stable parameter
A means response speed when weighing (0~5 selectable)
A=0 means the fastest response speed,
A=2: platform scale using response speed;
10 buf AB A=3: floor scale using response speed;
Press A=5 means the lowest response speed.
B means weighing stability, (0-3 selectable)
Stability increase by number.
Press to change value A, and press to change value B.

11 Press -HoLd- Lock the weight, press to skip the current setting.

Press save the setting above and return back to weight mode.
Press
12 - PASS - Press not save the setting above and return back to weight mode

Press repeat the setting above.

IX. COUNTING FUNCTION

Attention: In counting mode, the indicator isn’t allowed for weight unit switching function.
The indicator uses a sampling method to calculate the average weight of the test item, the larger sample
value, the more accurate calculation.
1.How to enter the counting mode?

9
 Waterproof Weighing Indicator Usage Manual
When in weighing mode, press key, screen display “n 0” means enter into counting function.

2.How to operation?

Step 1: Load the sample items on the scale, after stable symbol “ ” display press three seconds

and the “ n 00000” will shinning.

Step 2: Press & key to input the sample number, then press to confirm.

Step 3: Upload more test item which needed to be counted, the screen displays that total pieces of items and

“XXXXX PCS” indication is on.

Step 4: Press to exit and return back to weight mode.

If needed to test new sample, do same operation as above again.

For example: sample item weight 200g, total 100pcs:

When in weighing mode, press key, screen display “n 0” means enter into counting function.

Step 1: Load the sample items on the scale, after stable symbol “ ” display press three seconds

and the “ n 00000” will shinning.

Step 2: Press & key to input the sample number, “ n 00100”, then press to confirm.

Step 3:Upload more test item which needed to be counted, said 400g, the screen displays will “00200

PCS” indication is on.

Press to exit and return back to weight mode.

X.ERROR SIGNAL
There will shows error signal when the scale have some problem.

Error 1: means calibration isn’t workable, weight is too light or division is too high.

Error 2: means wrong zero, check the load cell if it is damaged.

Error 3: means displayed value exceed display range after unit change.

Error 4: means ISN=0.

Error 5: means overload, loaded weight exceed the full range.

Error 6: means cannot zero.

Error 7: means cannot tare.

Error 8: means cannot accumulate

Error 9: means cannot unit conversion.

Error 10: means not connect the battery or battery damage.

Error 11: means count value division is too high.

10
 Waterproof Weighing Indicator Usage Manual
XI. PRINTER FORMAT
There are two kinds of print out format with the external printer

Format A: (print out setting E0)

2015-08-16 13:38 2015-08-16 13:40

NO：001 Add：003
Weight： 10.00 ㎏ Total： 30.00 ㎏

Format B: (print out setting E0)

2015-08-16 13：38
NO：001 2015-08-16 13:40
G.W： 10.00 ㎏ Add：003
N.W： 10.00 ㎏ Total： 30.00 ㎏
T.W： 0.00 ㎏

XII. INTERFACE CONNECTION

1.Connection of load cell signal wire:
For better performance of the electronic scale, make sure to connect the 5 round pin plug to the 5 pin
socket firmly and tighten the screw up. Please see figure 1:

1: Pin +IN +signal

2: Pin -IN -signal
3: Pin AGND shield
4: Pin +E, +S +excitation, +feed back
5: Pin -E, +S -excitation, -feed back
Figure 1: Diagram of 5 round pin plug of the load cell
NOTE: For 6 pin load cell, please connect +E, +S and –E, -S in short circuit.

2. Connection of load cell signal wire (For 6 cores load cell only) :
While order with D-SUB-9 needle slot as figure 2 shows:

1 Pin : +Excitation 4 Pin: - Excitation

2 Pin : + Feed back 5 Pin : - Feed back
3 Pin : AGND
7 Pin : +Signal 8 Pin : - Signal

Figure 2: Diagram of D-SUB-9 needle slot

11
 Waterproof Weighing Indicator Usage Manual
3 .CONNECTION OF RS-232 :(Please specify in the order if needed)
RS-232 serial interface is a D-SUB-9 needle slot as figure 2 shows:

2: Pin RXD
3: Pin TXD 1 9: Pin TXD 2
5: Pin GND

Figure 3: Diagram of RS-232 slot

XIII.MAINTAINS AND NOTES

1. Please use the original adapter, when the indicator is not used, please unplug the adapter. If the indicator
is not used for a long time, please charge it at least once every two months or remove the battery to ensure
the battery service life. (For first use, please charge more than 12 hours to ensure the battery has enough
power to enter a safe and stable mode).
2.To ensure more clear display and longer service lift, do not put the indicator under the sunlight or the
place where the vibration is strong.
3.To ensure the accuracy, do not overload (the weight should be under the max. capacity).
4. If the indicator continuously be used for more than 24 hours, please charge for 10 hours to ensure the
battery life, indicator can work while charging battery.
5.Avoid any liquid or conductive particle enter into the indicator, in case to damage the internal parts and
electric shock.
6.If any malfunction occurred while using the indicator, please turn off the indicator immediately and send
back the indicator to our company for repair. Please do not repair it by yourself in case any happen.
7. The indicator connect the adapter to charge the battery, the end of red line is positive pole and the black
line is negative pole, if wrong connection, that will cause serious damage.
8.When the voltage is over low, indicator can still work about 10 minutes and then power off. If the battery
has not been charged and continue to turn on, the indicator will be forced to shut down after turn on.

XIV. WARRANTY
We guarantee one-year of maintenance for free since the date of purchase for any non-man-made faults
in normal working conditions. For maintenance, please send the equipment with the guarantee card to our
sales service.

Attention: we are always improving the machine, there is not pre-notice if there are something
different comparing with the precious ones.

12