Correct Answer:: Molap
Correct Answer:: Molap
HOLAP
MOLAP
DOLAP
Correct answer: MOLAP
Computers
Switches
Networks
Gateway
Correct answer: Networks
True
Correct answer: True
127.0.0.0
127.0.1.1
127.0.1.0
127.0.0.1
Ans : 127.0.0.1
TCP
IP
UDP
Correct answer: ICMP
6. Transport layer of OSI model lies between Network and ___________ layer
Application
Data link
Session
Presentation
Correct answer: Session
POP
PPP
FTP
25
80
21
65
Correct answer: 80
False
Correct answer: True
10. From the options below, which suits best for MODEM?
Correct answer: a device that modulates an analog carrier signal to encode digital information
64 bit
128 bit
16 bit
32 bit
Ans : 32 bit
Hardware address
Physical address
IP address
13. A network point that provides entrance into another network is called as ___________
Node
Gateway
Switch
Router
Correct answer: Gateway
True
False
Correct answer: True
15. A stream socket provides _________ communications between a client and server
One way
Two way
WAN
MAN
LAN
Correct answer: LAN
17. Which of the following protocol below are suited for email retrieval?
POP3
IMAP
FTP
Both and b above
TCP
UDP
IP
DHCP
Correct answer: TCP
Internet
LAN
Ethernet
Cables
Correct answer: Ethernet
20. The process of assigning IP address for specific times to the various hosts by DHCP is
called as?
Lend
sublease
let
Lease
Ans : Lease
22. __________ is a standard suite of protocols used for packet switching across computer
networks.
x.22
x.23
x.25
x.26
Correct answer: x.25
both a and b
Both b and d
False
True
Ans : True
26. ____________ assigns a unique number to each IP network adapter called the MAC
address.
27. Piconets in blue tooth a minimum of two and a maximum of ____________ Bluetooth
peer devices.
five
eight
nine
four
Correct answer: eight
28. Dynamic addressing doesn’t allow many devices to share limited address space on a
network
True
False
Ans : False
To set up an SSH tunnel, one configures an SSH client to forward a specified local port
Both a and b
Correct answer: To set up an SSH tunnel, one configures an SSH client to forward a specified local
port
UDP
TCP
SSTP
Both b and c
Switches operate at physical layer while hubs operate at data link layer
Switches operate at data link layer while hubs operate at transport layer
Switches operate at data link layer while hubs operate at physical layer
Correct answer: Switches operate at data link layer while hubs operate at physical layer
33. When computers in a network listen and receive the signal, it is termed as active toplogy
True
False
Correct answer: True
Speed in mbps
Number of segments
Length of segment
Size of segment
both b and c
checksum bit
error bit
parity bit
36. ALL IP addresses are divided into network address and host address
True
False
Correct answer: True
37. How can we examine the current routing tables in command prompt?
using routestart
using netstart
using netstat
either a or b
38. Both ping and tracert are used to find If the computer is in network.
True
False
Ans : False
In Ring all nodes are connected with another in a loop while in bus they are connected to a central cable
In Ring all nodes are connected with another loop while in bus they are connected to a central cable
In bus all nodes are connected with another in a loop while in star they are connected to a central node
In Bus all nodes are connected with another loop while in star they are connected to a central cable
Correct answer: In Ring all nodes are connected with another in a loop while in bus they are
connected to a central cable
40. MAC addressing works in data link layer while IP addressing works in network layer.
True
False
Correct answer: True