Scribd Logo
Upload

Welcome to Scribd!

  • 151 views

    QS115

    Uploaded by

    Yadira Viamontes
    The QS 115 is a front-loaded bass reflex subwoofer with a single 15-inch woofer and 4-inch coil. It is designed to produce high sound pressure levels of 132 dB with minimal power compression. The cabinet is constructed of 18mm birch wood and has dual NL4 speakon connectors. It is intended to extend the low frequency range and add power when used with QUBE full-range speaker systems for applications like nightclubs, theaters, and live venues.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    QS115

    Uploaded by

    Yadira Viamontes
    151 views2 pages
    The QS 115 is a front-loaded bass reflex subwoofer with a single 15-inch woofer and 4-inch coil. It is designed to produce high sound pressure levels of 132 dB with minimal power compression. The cabinet is constructed of 18mm birch wood and has dual NL4 speakon connectors. It is intended to extend the low frequency range and add power when used with QUBE full-range speaker systems for applications like nightclubs, theaters, and live venues.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The QS 115 is a front-loaded bass reflex subwoofer with a single 15-inch woofer and 4-inch coil. It is designed to produce high sound pressure levels of 132 dB with minimal power compression. The cabinet is constructed of 18mm birch wood and has dual NL4 speakon connectors. It is intended to extend the low frequency range and add power when used with QUBE full-range speaker systems for applications like nightclubs, theaters, and live venues.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    151 views2 pages

    QS115

    Uploaded by

    Yadira Viamontes
    The QS 115 is a front-loaded bass reflex subwoofer with a single 15-inch woofer and 4-inch coil. It is designed to produce high sound pressure levels of 132 dB with minimal power compression. The cabinet is constructed of 18mm birch wood and has dual NL4 speakon connectors. It is intended to extend the low frequency range and add power when used with QUBE full-range speaker systems for applications like nightclubs, theaters, and live venues.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    QS 115

    REINFORCEMENT SUBWOOFER

    KEY FEATURES
    Enclosure in 18 mm birch wood

    15” high power woofer with 4” coil

    3 M10 anchoring points

    Designed to strenghten and extend the low freq. range


    of the QUBE line

    APPLICATION
    High performance touring
    Fixed installations
    Medium-Small live venues
    Theatres

    GENERAL DESCRIPTION
    The QS 115 is a front-loaded bass reflex subwoofer. Equipped witha single high excursion 15” woofer with 4” coil. The specially
    designed reflex port and efficient voice coil cooling system enables the QS 115 to achieve high SPL with minimal power
    compression. Designed for high sound levels (132 dB SPL), with its outstanding bass extension and articulation the QS 115 is the
    ideal companion forQUBEfull-range speaker system when extra power and deep is require at low frequencies.
    Applications include night clubs, pubs, small live venue, theatres or distributed subwoofer for disco.
    The cabinet is constructed from 18mm birch polywood finish in a durable and scratch resistant paint. 3 M10 anchoring points for
    suspended installation.
    The connector panel’s have dual Neutrik NL4 speakon for reliable input and loop through connections.

    TECHNICAL SPECIFICATIONS
    ELECTRICAL PERFORMANCE PHYSICAL
    Configuration SUBWOOFER Low frequency woofer 1 x 15” - coil Ø 4”
    Recommended amplifier (1) 1200W rms Input connectors 2 x speakon NL4 paralleled
    Long term power AES (2) 600 W Net dimensions (WxHxD) 480 x 685 x 603 mm
    Short term power IEC 268-5 2400 W Net weight 40 kg
    Nominal impedance 4/8 ohm Enclosure materials 18 mm birch wood
    Frequency response @-6dB (3) 38 Hz - 400 Hz Finish wear-resistant textured black paint
    Sensitivity @1W, 1m (4) 98.5 dB Grille black powder coated perforated steel
    Max SPL (5) 132 dB with foam
    Dispersion @-6 dB (HxV) ) omnidirectional
    Crossover frequency 100 Hz
    Recommended HP filter 30 Hz - 24 dB oct.

    (1) amplifier power on nominal loudspeaker impedance (4) average SPLmeasured over the freq. response range

    (2) 2 hours, pink noise with crest factor 2, applied RMS voltage corresponding to the power on theminimum of (5) calculated based on short term power capacity and measured 1W, 1m
    the modulus of the impedance of the speaker in full rangemode, or of the driver in bi-ampmode. full space sensitivity
    (3) full-space on axis
    QS 115
    REINFORCEMENT SUBWOFER

    DIMENSION DRAWINGS INPUT PANEL & BLOCK DIAGRAM

    480 603
    153.5

    QS 115
    REINFORCEMENT SUBWOOFER

    FULL SPACE FREQUENCY RESPONSE


    dB SPL
    110
    105
    100
    95
    90
    85
    LF
    80
    75
    70
    65 1-
    1+ 2+
    2-
    60
    55
    50
    10Hz 20 50 100 200 500 1k 2k 5k 10k 20k 40k

    NOMINAL IMPEDANCE 4 ohm


    RECOMMENDED AMPLIFIER 1200W rms
    SHORT TERM (IEC 268-5) 2400W rms
    LONG TERM (IEC 268-5) 600W
    FREQUENCY RESPONSE (@-6dB) 38Hz - 400Hz
    98,5dB

    ARCHITECTURAL & ENGINEERING SPECS.


    132dB

    MANUFACTURED IN EEC

    The subwoofer loudspeaker shall incorporate one 15” LF transducer with a


    4” coil.
    System frequency response shall vary no more than +/- 6dB from 38Hz to
    400Hzmeasured on axis.
    The loudspeaker shall produce a sound pressure level (SPL) of 132 dB on
    axis at 1 meter.
    It shall handle 600 watts of amplifier power long term (AES standard) and
    shall have a nominal impedance of 8 ohm.
    It shall be constructed of 18mm birch wood with internal reinforcement.
    Input connectors shall be two NL4 speakon.
    The front of loudspeaker shall be covered with a powder-coated perforated
    grille with foam.
    The subwoofer loudspeaker shall be theQUBEmodelQS115

    FBT Elettronica S.p.A.


    www.qubeaudio.com www.fbt.it

    You might also like