Esc Anode Stud Bolt Capacity Calculation - Ph19-0850-Calc-02

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

ESC Steel Philippines, Inc.

6F Cyber One Building, 11 Eastwood Avenue, Eastwood City Cyberpark, Bagumbayan, Quezon City, Manila,
Philippines
Tel: +632 464 9383 Email: [email protected]
ESC ANODE STUD BOLT CAPACITY CALCULATION – PH19-0850-CALC-02

Company ESC Steel Philippines, Inc. Calculation PH19-0850-CALC-02


Client Gerona Enterprises Revision A

MINDANAO INTERNATIONAL CONTAINER TERMINAL SERVICES INC

MICTSI MOORING DOLPHIN AND LANDSIDE BOLLARD PROJECT

PHILIPPINES

ESC ANODE STUD BOLT CAPACITY


CALCULATION

Designed Jerry R. Marte Jr. Signed JRM Date 03.09.2020


Checked John Luis Yeates Signed JLY Date 03.09.2020
Approved John Luis Yeates Signed JLY Date 03.09.2020

1
ESC Steel Philippines, Inc.
6F Cyber One Building, 11 Eastwood Avenue, Eastwood City Cyberpark, Bagumbayan, Quezon City, Manila,
Philippines
Tel: +632 464 9383 Email: [email protected]
ESC ANODE STUD BOLT CAPACITY CALCULATION – PH19-0850-CALC-02

2
ESC Steel Philippines, Inc.
6F Cyber One Building, 11 Eastwood Avenue, Eastwood City Cyberpark, Bagumbayan, Quezon City, Manila,
Philippines
Tel: +632 464 9383 Email: [email protected]
ESC ANODE STUD BOLT CAPACITY CALCULATION – PH19-0850-CALC-02

1.0 Introduction
The capacity calculation is completed by ESC Steel Philippines, Inc for the construction of the new breasting
dolphin in MICTSI Cagayan de Oro. The capacity calculation is for the stud bolt of the anodes.

2.0 Design Standards & References


ESC has utilized the following design standards and references for this calculation where applicable:
Standard Name
IS:800-1984 Code of Practice for General Construction in Steel.

3.0 Capacity Calculation


Material properties of Stud Bolt
Grade = SS304
Ultimate tensile strength = 505 N/mm²
Yield Strength = 215 N/mm²
Allowable shear stress = 0.45X215 = 96.75 N/mm²

Self Weight (Vertical Component)


W = 127.4 kgs x 9.81 m/s2
W = 1250 N

Drag Force (Horizontal Component)


D = ½ x C d x ρ x v2 x A
Cd = Coefficient of Drag = 2.1
ρ = Sea water density = 1030 kg/m3
v = Max. tidal velocity = 7m/s (Maximum figure globally)
A = Area = 1.25m x 0.185m = 0.23m2

D = ½ x 2.1 x 1030 x 72 x 0.23


D = 12,189 N

Total Force Acting on Stud Bolt


F = √(W2 + D2)
F = √(12502 + 121892)
F = 12,253 N / 2 bolts per anode
F = 6,126.5 N

Shearing Stress on Stud Bolt


S = F / (π/4 x 162)
S = 6126.5 / (π/4 x 162)
S = 30.47 N/mm² < 96.75 N/mm², ok
4.0 Conclusion
The M16 x 2 stud bolts in SS304 material are sufficient for both self weight and maximum drag load anticipated

3
ESC Steel Philippines, Inc.
6F Cyber One Building, 11 Eastwood Avenue, Eastwood City Cyberpark, Bagumbayan, Quezon City, Manila,
Philippines
Tel: +632 464 9383 Email: [email protected]
ESC ANODE STUD BOLT CAPACITY CALCULATION – PH19-0850-CALC-02

from high current.

4
ESC Steel Philippines, Inc.
6F Cyber One Building, 11 Eastwood Avenue, Eastwood City Cyberpark, Bagumbayan, Quezon City, Manila,
Philippines
Tel: +632 464 9383 Email: [email protected]
ESC ANODE STUD BOLT CAPACITY CALCULATION – PH19-0850-CALC-02

You might also like