Scribd
Upload
220 views2 pages

02 Chopped Strand Mat Emc300

This document provides information on Chongqing Polycomp International Corp's chopped strand mat products. It describes the product identification system, material composition, benefits, technical specifications, packaging, and storage recommendations. The chopped strand mats are made of bonded chopped glass fibers and are used to produce fiber reinforced plastic components through hand layup. They are available in various area weights and widths to suit different applications.

Uploaded by

Carlos Alva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
220 views2 pages

02 Chopped Strand Mat Emc300

This document provides information on Chongqing Polycomp International Corp's chopped strand mat products. It describes the product identification system, material composition, benefits, technical specifications, packaging, and storage recommendations. The chopped strand mats are made of bonded chopped glass fibers and are used to produce fiber reinforced plastic components through hand layup. They are available in various area weights and widths to suit different applications.

Uploaded by

Carlos Alva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Chongqing Polycomp International Corp.

Jianqiao Industiral Park B, Dadukou District Chongqing, China.


Post code: 400082 website: www.cpicfiber.com
Technical support . Tel: (+86-23)68157743 (+86-23)68157178
Marketing Dept. Tel: (+86-23)68157828 (+86-23)681577586
Fax: (+86-23)68157822

Chopped Strand Mat


EMC300-1040/1270/1520
Identification

Example: EMC300-1270
EMC E-glass Power Bonded Chopped
Strand Mat
300: Area weight (g/m2)
1270: Width (mm)

Product Description
Chopped Strand Mat is made from chopped glass fibers, which are bonded with powder
or emulsion binders. It can be used in hand lay-up process to produce FRP products,
such as plates, lighting board, hull, bathtub, cooling towers, anti-corrosion materials,
vehicles.

Product Benefits
• Good transparency for the laminates
• Rapid wet out
• Easy to remove air bubbles
• Good dispersion and uniformity
• High wet-strength retention
• Good mechanical properties

Technical Characteristics

Area Longitudinal
Filament Chopped Loss on Moisture
Sizing Tensile Width
Diameter Length Weight Ignition Content
Type Strength (mm)
(μm) (mm) (g/m2) (N/150mm)
(%) (%)

/ ISO 1888 / ISO 3374 ISO 3342 ISO 5025 ISO 1887 ISO 3344

Silane ±1 ±5 ±10% ≥60 -2/+8 3.5±2 ≤0.20

Glass Filament Chopped Weight(g/m2)


Product code Width(mm)
Type Diameter(μm) Length(mm)
EMC300–1040 1040
EMC300–1270 E* 13 50 300 1270
EMC300–1520 1520
*E/ECR/ECT glass types are available.
Chongqing Polycomp International Corp.
Jianqiao Industiral Park B, Dadukou District Chongqing, China.
Post code: 400082 website: www.cpicfiber.com
Technical support . Tel: (+86-23)68157743 (+86-23)68157178
Marketing Dept. Tel: (+86-23)68157828 (+86-23)681577586
Fax: (+86-23)68157822

Packaging
Core Carton box size
Roll Pallet size[mm]
Package Inside/Outside
weight[kg] （mm）L*W L*W*H
Diameter(mm)
EMC300–1040 80/275 30 285x285 1140*1140*80
EMC300–1270 80/310 44 320x320 1280*1280*110
EMC300–1520 80/310 53 320x320 1280*1280*110

Pallets illustration

Note: Products can be packed according to the customer's request.

Storage
The fabrics should be stored away from heat and moisture, and in their original packaging.
The best conditions are: temperatures between 15 and 35 ºC; humidity between 35 and
65 %.
If the product is not stored under these specifications, it is advisable to condition it in the
workshop for at least 24 hours before use to prevent condensation.
CPIC recommends that the material be used according to FIFO (first in, first out) method.
It is recommended the use of a spacer plate (10mm) between the pallets.

You might also like