VSX-808RDS: Audio/Video Multi-Channel Receiver

AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MASTER
VOLUME
STANDBY
CHARACTER / DTS DSP

CLASS MEMORY RF ATT /SEARCH MPEG MODE
STANDBY/ON
TUNING EON SIGNAL DIGITAL

– STATION + SELECT MODE SELECT MIDNIGHT NR
– FREQUENCY +
– OFF - ON
DOWN UP
BASS TREBLE
VIDEO INPUT
SPEAKERS LOUDNESS – + – + DIRECT
TAPE 2
MONITOR
PHONES S-VIDEO VIDEO L AUDIO R
ORDER NO.
VCR 1 VCR 2 DVD/LD TV/SAT CD FM/AM MD/TAPE 1 VIDEO
DVD 5.1CH
EON
RRV2115
VSX-808RDS
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model The voltage can be converted by the
Type Power Requirement
VSX-808RDS following method.
HYXJI AC220-230V AC240V, ∗
HYXJIGR AC220-230V AC240V, ∗
HVXJI AC230V AC240V, ∗
∗ : Alter the wiring of the Power-supply block at the primary winding of Power-transformer referring to the "Line Voltage Selection" described
in Service Manual.
CONTENTS
1. SAFETY INFORMATION ...................................... 2 7. GENERAL INFORMATION ................................ 45
2. EXPLODED VIEWS AND PARTS LIST ................ 3 7.1 PARTS .......................................................... 45
3. SCHEMATIC DIAGRAM ....................................... 6 7.1.1 IC ........................................................... 45
4. PCB CONNECTION DIAGRAM .......................... 26 7.1.2 DISPLAY ................................................ 48
5. PCB PARTS LIST ............................................... 39 7.2 DISASSEMBLY ............................................ 50
6. ADJUSTMENT .................................................... 44 7.3 BLOCK DIAGRAM ........................................ 52
7.4 REMOTE CONTROL UNIT .......................... 53
[CU-VSX140 (AXD7181)]
8. PANEL FACILITIES AND SPECIFICATIONS .... 57
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
c PIONEER ELECTRONIC CORPORATION 1999
Downloaded from www.Manualslib.com manuals search engine T – ZZK APR. 1999 Printed in Japan
VSX-808RDS
1. SAFETY INFORMATION
This service manual is intended for qualified service technicians ; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained
to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause
cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must
be of identical designation.
REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces
de remplacement doivent avoir la même désignation.
(FOR USA MODEL ONLY)
1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL
The following check should be performed for the
continued protection of the customer and service SHOCK HAZARD AND MUST BE CORRECTED BEFORE
technician. RETURNING THE APPLIANCE TO THE CUSTOMER.
LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water 2. PRODUCT SAFETY NOTICE
pipe, conduit, etc.) by connecting a leakage current tester Many electrical and mechanical parts in the appliance
such as Simpson Model 229-2 or equivalent between the have special safety related characteristics. These are
earth ground and all exposed metal parts of the appliance often not evident from visual inspection nor the protection
(input/output terminals, screwheads, metal overlays, control afforded by them necessarily can be obtained by using
shaft, etc.). Plug the AC line cord of the appliance directly replacement components rated for voltage, wattage, etc.
into a 120V AC 60Hz outlet and turn the AC power switch Replacement parts which have these special safety
on. Any current measured must not exceed 0.5mA. characteristics are identified in this Service Manual.
Electrical components having such features are identified
by marking with a on the schematics and on the parts list
Reading should in this Service Manual.
Leakage not be above The use of a substitute replacement component which does
Device current 0.5mA
under tester not have the same safety characteristics as the PIONEER
test recommended replacement one, shown in the parts list in
Test all this Service Manual, may create shock, fire, or other hazards.
exposed metal Product Safety is continuously under review and new
surfaces
instructions are issued from time to time. For the latest
information, always consult the current PIONEER Service
Manual. A subscription to, or additional copies of, PIONEER
Also test with
plug reversed Earth Service Manual may be obtained at a nominal charge from
(Using AC adapter ground PIONEER.
plug as required)
AC Leakage Test
2
Downloaded from www.Manualslib.com manuals search engine
VSX-808RDS
2. EXPLODED VIEWS AND PARTS LIST

NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screws adjacent to mark on the product are used for disassembly.
2.1 PACKING
5 6 (1) PACKING PARTS LIST

7
Mark No. Description Part No.
1 Packing Sheet AHG7010
HYXJI Type Only NSP 2 Alkaline Dry Cell Battery VEM1012
17 (LR6, AA)
3 Operating Instructions See Contrast table (2)
16 4 •••••
10
15 5 FM Antenna ADH7005
Refer to
"7.4 REMOTE 6 AM Loop Antenna ATB7009
CONTROL UNIT" NSP 7 Warranty Card ARY7022
Except HVXJI Type 8 8 Remote Control Unit AXD7181
14 (CU-VSX140)
12(1/2) 9 •••••
1 10 Polyethylene Bag Z21-038
11(1/2) 12(2/2) (0.03×230×340)
Except
HYXJIGR Type 11 Front Pad 508 AHA7236
3 12 Rear Pad 508 AHA7237
13 Packing Case 808 AHD7695
2
11(2/2)
13
(2) CONTRAST TABLE

VSX-808RDS/HYXJI, HYXJIGR and HVXJI are constructed the same except for the following :
Part No.
Mark No. Symbol and Description Remarks
HYXJI Type HYXJIGR Type HVXJI Type
3 Operating Instructions (English) ARB7158 Not used ARB7158
14 Operating Instructions (German) ARC7203 ARC7203 Not used
15 Operating Instructions (French/Italian) ARC7204 Not used Not used
16 Operating Instructions (Swedish/Dutch) ARC7205 Not used Not used
17 Operating Instructions (Portuguese/Spanish) ARC7206 Not used Not used
3
VSX-808RDS
2.2 EXTERIOR
74
57
52
32 57
75
26 Except HVXJI Type
60 57 28
31 57 P (HVXJI Type Only)

72
57
16 57
57 57
11 57
4
∗1
Note ∗1 : +2
57 12
Torque is 12 –0 kg • cm 69
73
58 60 H 57
57
61 53 14
57 ∗1 68 M 23
L K 19 54 66
N 57 24
D G
35 67
F 13 34
8 64 F
65 29 M
I 27
7 17
55 10
J 57 H
K 63 52 C
65 57
57 G 57
5 J 57 58
55 76
40
I
52 38
39 57 57
52
62
18 77
33 57 40 57 57
1
57 E B
52
21 30
59 N 36
D
45 59
53 15 2
E L 37 39
57 57 36
6 44 3 25 C
59 59
50 A
59 57
57
22
49 43 B Accessories of
Front Panel 608
51 H 59
42 53 (No. 47)
57 A
26
P
46 71 70
HVXJI Type Only
47 57
41
4
VSX-808RDS
(1) EXTERIOR PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 INPUT Assy AWX7210 41 Volume Knob 508 AAB7179
2 FRONT Assy AWX7217 42 Sub Panel 508 AAD7482
NSP 3 POWER SW Assy AWX7222 43 Function Button 608 AAD7500
4 REAR SP Assy AWX7251 44 Power Button AAD7440
5 AMP Assy AWX7226 45 Power Button M AAD7442
NSP 6 HEADPHONE Assy AWX7230
7 TRANS 1 Assy AWX7287 46 Display Window W808 AAK7612
8 TRANS 2 Assy AWX7292 47 Front Panel 808 AMB7561
NSP 9 FRONT VIDEO Assy AWX7241 48 •••••
10 BARRIER Assy AWX7284 49 Name Plate PAM1776
50 LED Lens PNW2019
NSP 11 F.SP.CONNECT Assy AWX7285
NSP 12 R.C.SP.CONNECT Assy AWX7286 51 •••••
13 VIDEO Assy AWX7236 52 Screw ABA7017
14 SVIDEO Assy AWX7378 53 Screw ABA7009
15 MECH SW Assy AWX7247 54 Screw ABA7043
55 Screw RBA1099
16 FRONT LARGE Assy AWX7245
17 DOLBY DIGITAL Assy AWX7374 56 •••••
18 Power Transformer (T1) ATS7242 57 Screw BBZ30P080FZK
19 Fuse (FU1 : T2.5A) REK-104 58 Screw BBZ30P200FMC
20 ••••• 59 Screw BPZ30P080FMC
60 Screw FBT40P080FZK
21 FFC 21P (J2) ADD7100
22 FFC 07P (J4) ADD7101 NSP 61 Binder (BK-1) ZCA-BK1
23 FFC 13P (J5) ADD7103 62 Heat Sink Angle F ANG7194
24 FFC 17P (J8) ADD7107 63 Heat Sink Angle R ANG7195
25 FFC 26P (J3) ADD7118 NSP 64 Heat Sink D5 ANH7090
65 Screw BBZ30P080FMC
26 AC Power Cord See Contrast table (2)
NSP 27 8P Shield Cable (J6) ADX7251 NSP 66 FET Assy AWX7228
28 Cord Stopper CM-22B 67 FM/AM TUNER Unit AXX7048
29 Tuner Holder B AAD7490 68 Sheet AEE7026
NSP 30 Under Base D5 ANA7079 69 FET Angle ANG7186
70 Fuse Holder See Contrast table (2)
31 Rear Panel ANC7723
32 Bonnet Case AZN7771 71 Fuse (T5A) See Contrast table (2)
33 Trans Frame ANG7193 72 Screw BBT30P100FCC
34 DSP Shield ANG7196 73 FFC 11P (J7) ADD7142
NSP 35 Heat Sink Assy D5 ANH7095 74 Push Rivet AEC7025
75 Top Cover AME7375
36 Insulator PNW2766
37 Locking Card Spacer AEC7160 NSP 76 Shrink Shield 140 PDM1021
38 PCB Mold AMR2533 77 Cord Clamper RNH-184
NSP 39 Card Spacer DEC1770
NSP 40 Binder RNE1277
(2) CONTRAST TABLE

VSX-808RDS/HYXJI, HYXJIGR and HVXJI are constructed the same except for the following :
Part No.
Mark No. Symbol and Description Remarks
HYXJI Type HYXJIGR Type HVXJI Type
26 AC Power Cord VDG1061 VDG1061 VDG1063
70 Fuse Holder Not used Not used VKR1003
71 Fuse (T5A) Not used Not used PEK1003
5
1 2 3 4
VSX-808RDS
3. SCHEMATIC DIAGRAM
A
3.1 OVERALL WIRING CONNECTION DIAGRAM
FM/AM TUNER P Q Q 1/3- Q 3/3

UNIT FRONT VIDEO
J4
7P
(AXX7048) DOLBY DIGITAL

ASSY ASSY CN9551
(AWX7241) (AWX7374)
A A 1/2, A 2/2
INPUT ASSY
(AWX7210)
N O
VIDEO ASSY SVIDEO ASSY
(AWX7236) (AWX7378)
D
6
1
Downloaded from www.Manualslib.com 2
manuals search engine 3 4
5 6 7 8
VSX-808RDS
Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
A
I MB
POWER SW
C HEADPHONE
MECH SW
B ASSY ASSY
ASSY
FRONT ASSY (AWX7222) (AWX7230)
(AWX7247)
(AWX7217)
K TRANS 1 ASSY
(AWX7287)
POWER TRANSFORMER (T1)

(ATS7242)
B
TRANS 2 ASSY
J (AWX7292)
L
BARRIER ASSY
(AWX7284)
MA
FET ASSY
(AWX7228) D D 1/2, D 2/2 C
AMP ASSY
(AWX7226) J52 J51
FU1 REK-104 (T2.5A)
F E
R.C.SP. F.SP.
CONNECT ASSY CONNECT ASSY AC220-230V
(AWX7286) (AWX7285) AC POWER CORD
HYXJI and HYXJIGR
TYPES : VDG1061
HVXJI TYPES : VDG1063
D
H G
REAR SP ASSY FRONT LARGE ASSY
(AWX7251) (AWX7245)
7
Downloaded from www.Manualslib.com 5manuals search engine 6 7 8
1 2 3 4
VSX-808RDS
3.2 INPUT ASSY (1/2)

P CN602
A 1/2 INPUT ASSY(1/2)
A (AWX7210)
• FUNCTION BLOCK
JA103 (1/2)
AKB7113
JA102 (1/2)
AKB7113
B
JA101 (1/2)
AKB7113
JA101 (2/2)
AKB7113
JA102 (2/2)
AKB7113
C
TO FM/AM
JA103 (2/2)
AKB7113
TUNER UNIT
A 2/2
D
D 1/2 406
B CN202
8
1
A 1/2
5 6 7 8
VSX-808RDS
A 2/2
L ch
: AUDIO SIGNAL ROUTE
C ch A
: AUDIO SIGNAL ROUTE (CENTER)
FL ch
: AUDIO SIGNAL ROUTE (FRONT)
Q 1/3
CN9801
O
CN554
J 352
ACH7112
3300/35
ACH7113
2200/35
C
ACH7111
3300/16
N
CN507
Q 1/3
CN9802
Downloaded from www.Manualslib.com 5manuals search engine 6 7

A 1/2 8
9
1 2 3 4
VSX-808RDS
3.3 INPUT ASSY (2/2)

A A 2/2 INPUT ASSY(2/2)
(AWX7210)
• E. VOL BLOCK A 1/2
IC301
LC7535M
(LC7536M)
3.3k
120p
12k
B
A 1/2
A 1/2
12k
3.3k
IC303 68p
LC7535M
(LC7536M)
3.3k
68p
12k
10 A 2/2
1
5 6 7 8
VSX-808RDS
FL ch
: AUDIO SIGNAL ROUTE (FRONT) A
12k
A 1/2
3.3k
IC302 120p
LC7535M
(LC7536M)
3.3k
120p
12k

A 2/2
8
11
1 2 3 4
VSX-808RDS
3.4 FRONT and POWER SW ASSYS
A 1/2 CN111
REMOTE
RECEIVER
B UNIT
MASTER VOLUME
C
C
POWER SW
ASSY
(AWX7222)
Q 1/3
CN9551
12 B C
1
5 6 7 8
VSX-808RDS
D 2/2 CN401
A
B FRONT ASSY
(AWX7217)
0.47/5.5
FRONT ASSY
S201 : SIGNAL SELECT
S202 : MIDNIGHT
S203 : DIGITAL NR
S205 : –
BASS
S206 : +
S207 : –
TREBLE
S208 : +
S209 : SPEAKERS
S210 : LOUDNESS
S211 : DIRECT
S212 : TAPE2 MONITOR
S213 : / DTS MPEG C
S214 : DSP MODE
S217 : DVD/LD
S218 : TV/SAT
S219 : CD
S220 : FM/AM
S221 : VCR 1
S222 : VCR 2
S223 : MD/TAPE1
S224 : VIDEO
S229 : CLASS
S230 : MEMORY
S231 : RF ATT
S232 : CHARACTER/SEARCH
S233 : –
STATION/FREQUENCY
S234 : +
S235 : TUNING SELECT
S236 : EON MODE
S250 : MASTER VOLUME

B8
13
1 2 3 4
VSX-808RDS
3.5 AMP (1/2), F.SP.CONNECT, R.C.SP.CONNECT, FRONT LARGE

and REAR SP ASSYS
A
4.7/50
NP
C439 SL
220p
/500
4.7/50
B NP
C1439
YF
10000p
R1456
4.7
CN112
C1442
4.7/50 SL
NP 220p
/500 C1441 SL
A 1/2
220p
/500
39p 39p
4.7/50
NP
C
C442 SL
220p
/500
NP
4.7/50
D
C1438
330p
D 2/2 D 1/2 AMP ASSY(1/2)

JA413
AKB7111
(AWX7226)
D 2/2
14 D 1/2
1
5 6 7 8
VSX-808RDS
FL ch
A
: AUDIO SIGNAL ROUTE (FRONT)
D 2/2
0.22
RETURN
E F.SP. CONNECT ASSY
0.22 (AWX7285)
G FRONT LARGE ASSY

(AWX7245)
0.01 0.01
0.01
0.22
0.22 0.22
0.22
0.01
AKE7026
C443 SL B
0.01
0.01
220p/500
C444 SL
220p/500
RETURN
JA653
20k AKB7111
2k
0.01
0.01
C
0.01
0.22 0.22
0.01
AKE7042
RETURN
H REAR SP ASSY
(AWX7251)
0.22 0.22
F R.C.SP. CONNECT ASSY

(AWX7286)
D
CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE NO. ICP-N25, MFD BY
ROHM CO., LTD. FOR IC404 and IC405.
D 2/2
Downloaded from www.Manualslib.com 5manuals search engine 6

D 1/2 E F G H
7 8
15
1 2 3 4
VSX-808RDS
3.6 AMP (2/2), HEADPHONE, TRANS 2, TRANS 1, BARRIER, FET

and MECH SW ASSYS
D 1/2 B CN203
A
D 2/2
AMP ASSY(2/2)
(AWX7226)
(B)
+42.4 (B)
–42.4
MB CN376
HP
: AUDIO SIGNAL ROUTE
(HEAD PHONE)
I ATT7037
1000/25
HEADPHONE
ASSY
D (AWX7230)
VNF-091
16
1
D 2/2 I
5 6 7 8
VSX-808RDS
MA FET ASSY (AWX7228) REPLACE ONLY WITH SAME TYPE NO. ICP-N70, MFD BY
ROHM CO., LTD. FOR IC353.
A
REPLACE ONLY WITH SAME TYPE NO. 491005, MFD BY
LITTELFUSE INK. FOR IC351, IC352 (AEK7019).
BARRIER ASSY
L (AWX7284)
+59.5
B
MAIN TRANS.
(B)
1.8k
NP
A 1/2
–59.5
CN115
C
TRANS 2 ASSY
J (AWX7292)
AC240V
AC230V
MAIN TRANS.
TRANS 1 ASSY
K (AWX7287)
D 2/2
410
REK-104 LIVE
AC220-230V
ATF-151
T2.5A250V
NEUTRAL AC POWER CORD

MB D
VDG1061: EXCEPT HVXJI TYPE MECH SW ASSY
VDG1063: HVXJI TYPE ONLY
(AWX7247)
• NOTE FOR FUSE REPLACEMENT
CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE.
REPLACE WITH SAME TYPE AND RATINGS ONLY.
Downloaded from www.Manualslib.com 5manuals search engine 6

D 2/2 J K L MA MB 7 8
17
1 2 3 4
VSX-808RDS
3.7 VIDEO, SVIDEO and FRONT VIDEO ASSYS

VIDEO ASSY
A
N (AWX7236)
UPC4570C
UPC4570C
A 1/2
CN110
UPC4570C
D UPC4570C
18 N O1
5 6 7 8
VSX-808RDS
Y
: S-VIDEO Y-SIGNAL ROUTE
SVIDEO ASSY C
O (AWX7378) DC
: S-VIDEO C-SIGNAL ROUTE
: S-VIDEO C-DC ROUTE A
P
CN602
A 1/2 CN109
C
PCB BINDER
551
CN601
FRONT
P VIDEO
ASSY
(AWX7241)
PCB BINDER
CN105
Y20 ADX7248
O CN555 A 1/2

O P 8
19
1 2 3 4
VSX-808RDS
3.8 DOLBY DIGITAL ASSY (1/3)

A
CN108
A 1/2
B
Q 3/3
C9121
(R9103)
0
20 Q 1/3
1
5 6 7 8
VSX-808RDS
Q 2/3 A
Q 1/3 DOLBY DIGITAL ASSY(1/3)
(AWX7374)
• INPUT, CODEC & CONTROL BLOCK
Q 3/3
Q 2/3
C9506
(R9521)
47k
7.7MHz
C
Q 3/3
Q 3/3
D
B CN201
A 1/2 CN113

Q 1/38
21
1 2 3 4
VSX-808RDS

A
Q 1/3
Q 1/3
22 Q 2/3
1
5 6 7 8
VSX-808RDS

(AWX7374)
A
• DSP & MEMORY BLOCK

Q 2/3
8
23
1 2 3 4
VSX-808RDS
Q 1/3
A
UPC4570G2
UPC4570G2
UPC4570G2
UPC4570G2
UPC4570G2
UPC4570G2
D Q 1/3
Q 1/3
24 Q 3/3
1
5 6 7 8
VSX-808RDS

(AWX7374)
• OUTPUT FILTER & MUTE BLOCK A
UPC4570G2
Q 1/3
UPC4570G2
UPC4570G2 UPC4570G2
UPC4570G2
UPC4570G2
UPC4570G2 UPC4570G2
UPC4570G2
UPC4570G2

Q 3/3
8
25
1 2 3 4
VSX-808RDS
4. PCB CONNECTION DIAGRAM

4.1 INPUT and FRONT VIDEO ASSYS
A NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
Transistor
B C E
B C E B C E SIDE A
Transistor
B C E with resistor
D G S D G S
Field effect
D G S transistor P.C.Board Chip Part SIDE B
Resistor array
3-terminal
regulator
D 406 J 352
A INPUT ASSY
B
P FRONT VIDEO ASSY
D
(ANP7274-A)
O CN555 Q CN980
Q1351 IC104-IC106
IC107 IC108 IC110
SIDE A
26
1
A P
5 6 7 8
VSX-808RDS
FM/AM TUNER
UNIT
B CN202 O CN554
D
(ANP7273-A)
Q CN9802 Q CN9801 N CN507

IC102 Q104-Q107 IC101
IC103 Q101-Q103
SIDE A
A
8
27
1 2 3 4
VSX-808RDS
A INPUT ASSY
D
IC109 IC307-IC309
SIDE B
28 A 1
5 6 7 8
VSX-808RDS
(ANP7273-A)
D
07-IC309 IC301-IC303 IC304-IC306 IC310
SIDE B

A8
29
1 2 3 4
VSX-808RDS
4.2 FRONT and POWER SW ASSYS
D CN401
C POWER Q202 Q205 Q204 Q282 Q281 IC281 Q203 Q201
SW ASSY
IC201
30 B C1
5 6 7 8
VSX-808RDS
A CN111
(ANP7273-A)
SIDE A
B FRONT ASSY B
Q CN9551
Q201 Q207 Q206 Q283
B FRONT ASSY
(ANP7273-A) SIDE B

B
8
31
1 2 3 4
VSX-808RDS
4.3 AMP, HEADPHONE, FET and MECH SW ASSYS

A
(ANP7268-B) (ANP7274-A)
MB MECH SW ASSY J
351
MA FET ASSY I HEADPHONE 356
ASSY
B Q1452
J
Q1451 353
SIDE A
(ANP7274-A)
B
CN203
D AMP ASSY
C
A
CN112
Q403 Q407 Q404 Q1404 Q1405

IC405 Q401 Q405 Q406 Q402
IC401 Q408 Q1402 IC4
32 D I MA MB
1
5 6 7 8
VSX-808RDS
K J51 K J52 A
NEUTRAL
AC IN
LIVE
C
F 691
E 686
D
(ANP7274-A)
IC701 Q701 Q454

Q453 Q456 Q458 Q452 IC404 Q711-Q714
02 IC403 Q1403 Q1401 Q451 Q457 IC402 Q1433 Q1434
Q455

D
8
33
1 2 3 4
VSX-808RDS
4.4 F.SP.CONNECT, R.C.SP.CONNECT, FRONT LARGE

and REAR SP ASSYS
A
G FRONT LARGE
ASSY
Q628
Q626
Q627
Q631
B Q629
Q630
(ANP7268-B)
E F.SP.
CONNECT
ASSY
(ANP7274-A)
D 408
D 402
Q652
Q651
C
(ANP7274-A)
F R.C.SP.
CONNECT
ASSY
D
H REAR SP H REAR SP
ASSY (ANP7273-A) ASSY
SIDE B SIDE A
34 E F G H
1
1 2 3 4
VSX-808RDS
4.5 TRANS 2, TRANS 1 and BARRIER ASSYS

A
L BARRIER
ASSY
(ANP7274-A)
J TRANS 2 ASSY
B
A CN115 (ANP7274-A)
D 404 IC351
IC353
D 405
C
POWER TRANSFORMER (T1)
Line Voltage Selection

Line Voltage can be changed by the following modification:
1. Disconnect the AC power cord.
2. Remove the cover. K TRANS 1
3. Change the connection wire from TRANS 1 ASSY
[Terminal No. J52 or J53] to AMP ASSY (Terminal No. J52)
ASSY
(ANP7274-A)
as follows.
Voltage Terminal No. of TRANS 1 ASSY 240V 220-230V
220-230V J52
240V J53
4. Stick a line voltage label on the rear panel. D
Description Part No. J52 J51
220V label AAX-193
240V label AAX-192 D SIDE A

J K L 4
35
1 2 3 4
VSX-808RDS
4.6 DOLBY DIGITAL ASSY

A
IC9391
B
CN201
IC9374
IC9501
Q9609
Q9608
IC9373
A Q9607
CN113
Q9610 IC9372
B Q9606 IC9604
Q9605 IC9371
Q9604 IC9603 IC9705
Q9603
Q9602
Q9601 IC9602 IC9361
A IC9321
CN108
IC9601 IC9311
C IC9451
IC9702 IC9701
IC9401
IC9704 IC9703
Q9203 Q9204 Q9401
IC9201 Q9402
Q9201
Q9202
(ANP7297-B)
Q DOLBY
SIDE A DIGITAL
ASSY
36 Q 1
1 2 3 4
VSX-808RDS
Q DOLBY A
DIGITAL
ASSY
IC9151 IC9101
SIDE B
(ANP7297-B)

Q
4
37
1 2 3 4
VSX-808RDS
4.7 VIDEO and SVIDEO ASSYS

A
IC501 Q501-Q505 Q506 IC502 IC503
N VIDEO ASSY
B
(ANP7274-A)
A CN110
O SVIDEO ASSY IC551

Q557 Q556 Q551 Q552
IC552 Q554
IC553
Q553
P CN602
C
(ANP7268-B)
D
A CN109
SIDE A
38 N O1
VSX-808RDS
5. PCB PARTS LIST

• When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω → 56 × 101 → 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω → 47 × 103 → 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω → R50 ..................................................................................... RN2H R 5 0 K
1Ω → 1R0 ..................................................................................... RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω → 562 × 101 → 5621 ...................................................... RN1/4PC 5 6 2 1 F
CAPACITORS
LIST OF ASSEMBLIES C1314, C1315, C320, C342, C343 ACH7110
(47µF/25V)
NSP INPUT ASSY AWK7474 C146 (3300µF/16V) ACH7111
INPUT ASSY AWX7210 C144 (3300µF/35V) ACH7112
FRONT ASSY AWX7217 C145 (2200µF/35V) ACH7113
NSP POWER SW ASSY AWX7222
REAR SP ASSY AWX7251 C101–C124, C131–C133 CCSQCH101J50
C300, C301, C322, C323 CCSQCH102J50
NSP AMP ASSY AWK7482 C344, C345 CCSQCH102J50
AMP ASSY AWX7226 C316, C340, C341 CCSQCH121J50
NSP FET ASSY AWX7228 C1316, C1319, C1322 CCSQCH561J50
NSP HEADPHONE ASSY AWX7230
VIDEO ASSY AWX7236 C1312, C1313 CCSQCH680J50
NSP FRONT VIDEO ASSY AWX7241 C153, C307 CEAT100M50
BARRIER ASSY AWX7284 C137, C138 CEAT101M10
NSP F.SP.CONNECT ASSY AWX7285 C147 CEAT101M16
NSP R.C.SP.CONNECT ASSY AWX7286 C134–C136 CEAT101M25
TRANS1 ASSY AWX7287
TRANS2 ASSY AWX7292 C305, C309 CEAT1R0M50
C127, C128 CEAT2R2M50
NSP EXCELLENT ASSY AWK7486 C321 CEAT470M25
FRONT LARGE ASSY AWX7245 C142 CEAT470M35
MECH SW ASSY AWX7247 C129, C130, C1352, C1354 CEAT4R7M50
SVIDEO ASSY AWX7378
C304, C326, C327, C348, C349 CEBA1R0M50
DOLBY DIGITAL ASSY AWX7374 C1300, C1301, C306, C328, C329 CECA100M50
C1302, C1303, C308, C330, C331 CECA1R0M50
C1351 CKSQYB102K50
C1306, C1307, C1310, C1311 CKSQYB103K50
A INPUT ASSY C1355, C1356, C139–C141, C143

C148–C152, C154, C156, C157
CKSQYB103K50
CKSQYB103K50
SEMICONDUCTORS C312, C313, C318, C319 CKSQYB103K50
IC102, IC103 LC4966 C334, C335, C338, C339 CKSQYB103K50
IC301–IC303 LC7536M C155 CKSQYB104K25
IC107, IC108 NJM7805FA
IC106 NJM7812FA C1353 CKSQYB222K50
IC104 NJM7815FA C125, C126 CKSQYB331K50
C302, C303, C324, C325 CKSQYB683K25
IC105 NJM7915FA C346, C347 CKSQYB683K25
IC101 TC9274N-001
IC109, IC304–IC310 UPC4570G2 RESISTORS
Q101, Q104, Q107 2SC1740S R146 RS3LMF331J
Q1351 2SC2878 R145 RS3LMF391J
Other Resistors RS1/10S J
Q103 KRA103M
Q102 KRC103M
D109 1SS355 OTHERS
D101–D108, D111 S5566G(TPB2) CN109 11P FFC CONNECTOR 52045-1145
D110 UDZS5.1B CN114 13P FFC CONNECTOR 52045-1345
CN110 17P FFC CONNECTOR 52045-1745
CN115 5P JUMPER CONNECTOR 52147-0510
39
VSX-808RDS
CN112 14P JUMPER CONNECTOR 52147-1410 V201 FL TUBE AAV7062

CN104 6P PIN JACK AKB7015 X201 CERAMIC RESONATOR ASS1055
JA101–JA103 6P PIN JACK AKB7113 (7.7MHz)
CN105 KR CONNECTOR B5B-PH-K-S X281 CRYSTAL RESONATOR ASS7004
CN108 15P PLUG KM200TA15 (4.332MHz)
CN113 7P PLUG KM200TA7

120–122 PCB BINDER VEF1040
C POWER SW ASSY
SEMICONDUCTORS
B FRONT ASSY D291 BR3371XJ30A
SEMICONDUCTORS
IC281 BU1923
SWITCHES AND RELAYS
IC201 PDG252A S291 ASG1034
Q282 2SA1515
Q201, Q202 2SA933S RESISTORS
Q206, Q207, Q283 2SC1740S All Resistors RS1/10S J
Q203–Q205, Q281 KRC101M
D201–D203, D205–D221 1SS355 OTHERS
D224–D226, D229 1SS355 291 4P CABLE HOLDER 51063-0405
D227, D228 UDZS5.1B
COILS AND FILTERS

L201, L281 LFA2R2J
D AMP ASSY
SEMICONDUCTORS
IC404, IC405 ICP-N25
SWITCHES AND RELAYS IC701 NJM78M56FA
S201–S203, S205–S214 ASG1034 IC401, IC402 PAC007A
S217–S224, S229–S236 ASG1034 IC403 PAC008A
S250 ASX7004 Q712 2SA992
CAPACITORS Q1404, Q1405 2SC1740S

C204 (0.047F/5.5V) ACH7017 Q711 2SC1845
C220–C222 CCSQCH101J50 Q1402, Q403, Q404, Q453, Q454 2SC2240
C217 CCSQCH102J50 Q405, Q406, Q455, Q456 2SC2705
C281, C282 CCSQCH270J50 Q1401, Q1403, Q1434, Q401, Q402 2SC2878
C283, C287 CEAT101M10
Q407, Q408, Q451, Q452 2SC2878
C290 CEAT1R0M50 Q457, Q458 2SC2878
C206, C208, C288 CEAT2R2M50 Q1436, Q714 KRA103M
C212 CEAT470M25 Q1435, Q701 KRC101M
C205 CEAT470M50 Q713 KRC103M
C202 CEAT471M6R3
D1401, D1403, D1435, D1436 1SS133
C227 CEJA221M6R3 D401, D402, D405, D406 1SS133
C284, C285 CKSQYB102K50 D411, D412, D451, D452 1SS133
C201, C203, C211 CKSQYB103K50 D455, D456, D461, D462 1SS133
C214 CKSQYB104K25 D703–D705 1SS133
C289 CKSQYB472K50
D711, D712, D717 D5SBA20(B)
C209, C210 CKSQYB473K50 D713, D714 MTZJ18B
C286 CKSQYB561K50 D701 MTZJ5.1A
C207 CKSQYF104Z25 D702 S1WB20
RESISTORS COILS AND FILTERS

R230 RA8T103J L701 LINE FILTER ATF-151
R225 RA9T104J L1432, L1433 AF CHOKE COIL ATH1004
SWITCHES AND RELAYS
OTHERS RY401 ASR7001
201 REMOTE RECEIVER UNIT GP1U27X RY701 ASR7016
204 4P CABLE HOLDER 51063-0405
CN201 15P FFC CONNECTOR 52044-0745 CAPACITORS
CN203 21P FFC CONNECTOR 52045-2145 C704, C705 (10000pF/AC250V) ACG7020
CN202 26P FFC CONNECTOR 52045-2645 C715, C716 (8200µF/71V) ACH7018
C1408, C1410 CCCSL101K2H
C1411, C1442, C415, C416 CCCSL221J50
C465, C466 CCCSL221J50
40
VSX-808RDS
C1441, C439, C442–C444

C1420, C1421
CCCSL221K2H
CCCSL390J50 E F.SP.CONNECT ASSY
C437, C438, C479, C480 CCCSL470J50
C1403, C1404, C405, C406 CEANP2R2M2A
OTHERS
C455, C456 CEANP2R2M2A 686 13P CABLE HOLDER 51048-1300
C1415, C423, C424, C473, C474 CEANP2R2M50

C1402, C403, C404, C453, C454
C413, C414, C463, C464
CEANP4R7M50
CEAT100M50 F R.C.SP.CONNECT ASSY
C436, C486 CEAT101M10 OTHERS
C1405, C411, C412, C461, C462 CEAT101M25 691 12P CABLE HOLDER 51048-1200
C713, C714 CEAT101M2A
C702 CEAT102M25
C490, C717, C718
C1419
CEAT1R0M50
CEAT221M10
G FRONT LARGE ASSY
C701 CEAT470M25 SEMICONDUCTORS
Q626–Q628 KRA103M
C1413, C1414, C421, C422 CEAT4R7M2A Q629–Q631 KRC101M
C471, C472 CEAT4R7M2A D626–D631 1SS133
C1432, C1433, C1436, C1437 CFTYA224J50
C1440 CGCYX104M25
C1417, C1418, C429, C430 CKCYB102K50
COILS AND FILTERS
L627, L628 AF CHOKE COIL ATH1004
C477, C478 CKCYB102K50
C1401, C401, C402, C451, C452 CKCYB331K50 SWITCHES AND RELAYS
C1412 CKCYB471K2H RY626–RY628 ASR7001
C1407, C1409 CKCYB471K50
C1439, C703, C706, C707 CKCYF103Z50
CAPACITORS
C1438 CKPUYB331K50 C627–C630 CFTYA224J50
C711, C712 CQMA103K2E C631–C636 CQMA103K2E
RESISTORS RESISTORS
R1412, R423, R424, R473, R474 ACN7094 R629, R630 RD1/4LMF4R7J
(0.22Ω, 5W) R631, R632 RS1LMF4R7J
R703 RD1/2PM270J R626–R628 RS1LMF561J
R1409, R1410, R415, R416 RD1/4MUF331J
R465, R466 RD1/4MUF331J
OTHERS
R419, R420, R469, R470 RD1/4MUF820J 627 8P SPEAKER TERMINAL AKE7026
R1432, R1433 RD1/4PMF4R7J CN626 13P PLUG AKM7006
R1436, R1437 RS1LMF4R7J
R1448 RS1LMF561J
Other Resistors RD1/4PU J
H REAR SP ASSY
OTHERS SEMICONDUCTORS
410 3P CABLE HOLDER 51048-0300 Q652 2SC1740S
404, 409 5P CABLE HOLDER 51048-0500 Q651 KRA101M
408 12P CABLE HOLDER 51048-1200 D653–D656 1SS355
402 13P CABLE HOLDER 51048-1300
405, 407 10P CABLE HOLDER 51052-1000 COILS AND FILTERS
L651 AF CHOKE COIL ATH1004
JA413 1P PIN JACK AKB7111
H701, H702 FUSE CLIP AKR1004 SWITCHES AND RELAYS
T701 POWER TRANSFORMER ATT7037 RY651, RY652 ASR7001
J17 JUMPER WIRE 3P D20PYY0325E
J14 JUMPER WIRE 5P D20PYY0520E

CAPACITORS
J10 JUMPER WIRE 14P D20PYY1415E C651, C652 CFTYA224J50
J18 BOARD IN WIRE DB020ND0 C653 CGCYX103M16
CN701 AC CORD SOCKET RKP1751 C654–C656 CQMA103K2E
401, 403, 411, 412 PCB BINDER VEF1040
RESISTORS
704 GROUND PLATE VNF-091 R652 RD1/4LMF4R7J
R657 RS1LMF4R7J
R651 RS2LMF271J
41
VSX-808RDS
OTHERS
MA FET ASSY
CN652 SPEAKER TERMINAL 6P AKE7042 SEMICONDUCTORS
CN651 12P PLUG AKM7007 Q1452 IRF540A
Q1451 IRF9540A
I HEADPHONE ASSY RESISTORS

R1451, R1452 RD1/4PMF101J
CAPACITORS Other Resistors RD1/4PM J
C1461, C1462 CKCYB392K50
C1464 CKPUYB101K50
OTHERS
1451 10P CABLE HOLDER 51052-1000
RESISTORS
R1463, R1464 RS1LMF681J
R1461, R1462 RS3LMF331J
MB MECH SW ASSY
OTHERS SWITCHES AND RELAYS
JA1461 HEADPHONE JACK RKB1014 S376 ASG7014
CAPACITORS
J TRANS2 ASSY C376, C377 CKCYF103Z50
SEMICONDUCTORS
IC351, IC352 (5A) AEK7019
OTHERS
IC353 (2.5A) ICP-N70 CN376 3PJUMPER CONNECTOR 52151-0310
D356 MTZJ20A
D357 MTZJ9.1B
D354, D355 S5688G
N VIDEO ASSY
CAPACITORS SEMICONDUCTORS
C350–C354, C360, C361(1µF/100V) ACH1237 IC501 NJM2296D
C362 CEANP470M25 IC502, IC503 UPC4570C
C359 CEAT101M10 Q502 2SA1515
C358 CEAT101M35 Q505 2SA933S
C357 CEAT470M50 Q501 2SC3377
Q506 KRC103M
RESISTORS D503, D505–D510 1SS133
R350–R352 RD1/4PMF100J D501, D502 MTZJ6.2B
R353 RFA1/4PS4R7J
R358 RS1LMF182J
CAPACITORS
C540–C543 CCCSL101J50
C505–C507, C536–C539 CCCSL221J50
OTHERS C501–C504, C511, C512, C535 CEAT470M25
352, 353 5P CABLE HOLDER 51048-0500 C517, C518, C521, C522 CEAT4R7M50
356 4P CABLE HOLDER 51052-0400 C545, C546 CEHAT470M25
351 6P CABLE HOLDER 51052-0600
J9 JUMPER WIRE 5P D20PYY0545E C509, C510 CGCYX473M25
CN354, CN355 4P PLUG KM200TA4 C508, C513, C514, C523–C526 CKCYF103Z50
C531–C533 CKCYF103Z50
357, 358 PCB BINDER VEF1040
RESISTORS
R510, R511 RS1LMF151J
K TRANS1 ASSY Other Resistors RD1/4PU J
OTHERS
J51 LEAD WIRE UNIT DB035NB0
OTHERS
J52 LEAD WIRE UNIT DB135NB0 CN507 17P FFC CONNECTOR 52045-1745
502, 503 2P PIN JACK AKB7017
CN504 4P PIN JACK AKB7087
L BARRIER ASSY JA505, JA506
REMOTE CONTROL JACK
RKN1004
OTHERS
CN681, CN682 4P SOCKET KP200TA4L
42
VSX-808RDS
O SVIDEO ASSY IC9391

IC9151
PQ20WZ51
TC74ACT151F
IC9101 TC74HCU04AF
SEMICONDUCTORS IC9311 TC74VHCT244AFT
IC551, IC552 NJM2296D IC9451 TC7SH08FU
IC553 TC4051BP
Q554 2SA1515 IC9361 TC7WU04F
Q551 2SA933S IC9601 TC9164AF
Q552 2SC1740S IC9602–IC9604, IC9701–IC9705 UPC4570G2
IC9321 XCD56362PV100
Q553 2SC3377 Q9201, Q9202, Q9601–Q9606 2SC3326
D555, D556, D559, D560 1SS133
D557, D558 MTZJ6.2B Q9203, Q9402, Q9607, Q9609, Q9610 DTA124EK
Q9204, Q9401, Q9608 DTC124EK
CAPACITORS D9601, D9602 1SS181
C570–C575 CCCSL221J50
C578, C579 CEAT470M10 COILS AND FILTERS
C551, C555, C559, C563 CEAT470M25 L9391, L9501, L9807, L9809 ATL7002
C590, C591 CEAT470M25 CHIP FERRITE BEAD
C593, C594 CEHAT470M25 F9326, F9375, F9377, F9379, F9381 DTF1064
CHIP BEAD
C552, C556, C560, C564, C567 CGCYX104M16 L9101, L9102, L9151, L9311, L9361 QTL1013
C580–C582 CGCYX104M16
C553, C557, C561, C565 CGCYX473M16 L9402, L9403, L9451, L9801–L9805 QTL1013
C576, C577 CGCYX473M16 CHIP SOLID INDUCTOR
C584, C585, C587 CKCYF103Z50
C554, C558, C562, C566 CKPUYY103M16 CAPACITORS

C568, C569 CKPUYY103M16 C9334, C9365 CCSQCH100D50
C9341, C9349, C9355, C9357, C9358 CCSQCH101J50
C9373, C9377, C9381 CCSQCH101J50
RESISTORS C9300, C9301, C9304–C9307, C9309 CCSQCH221J50
R583, R584 RS2LMF101J C9314, C9316, C9366, C9368 CCSQCH221J50
C9387–C9390, C9395–C9400, C9422 CCSQCH221J50
OTHERS C9428, C9429 CCSQCH221J50
CN554 11P FFC CONNECTOR 52044-1145 C9108, C9154, C9505 CCSQCH271J50
CN552, CN553 4P MINI DIN SOCKET AKP7020 C9127 CCSQCH471J50
CN551 4P MINI DIN SOCKET AKP7043 C9104 CCSQCH560J50
CN555 KR CONNECTOR 3P B3B-PH-K-S
551 PCB BINDER VEF1040 C9159, C9201, C9202, C9324, C9326 CCSRCH101J50
C9329, C9336, C9338, C9340, C9345 CCSRCH101J50
C9348, C9386 CCSRCH101J50
C9736 CCSRCH102J50
P FRONT VIDEO ASSY C9363, C9364 CCSRCH150J50
CAPACITORS C9420, C9707, C9708, C9721, C9722 CCSRCH151J50

C601, C602 CCCSL221J50 C9735 CCSRCH151J50
C604, C608 CEAT470M25 C9408, C9409 CCSRCH180J50
C605–C607 CGCYX104M25 C9360, C9405, C9424, C9554 CCSRCH221J50
C603 CGCYX473M25 C9609, C9610, C9621, C9622 CCSRCH221J50
C609, C610 CKCYB471K50
C9362, C9629 CCSRCH271J50
C611, C612 CKCYF103Z50 C9411, C9426, C9427, C9452, C9508 CCSRCH471J50
C9601, C9602, C9605, C9606 CCSRCH471J50
C9613, C9614, C9617, C9618, C9625 CCSRCH471J50
RESISTORS C9639 CCSRCH471J50
All Resistors RD1/4PU J
C9105, C9109, C9151, C9312, C9372 CEJA101M10
OTHERS C9376, C9380, C9383, C9393, C9402 CEJA101M10
CN601 FRONT PIN JACK AKX7007 C9501, C9801 CEJA101M10
601 PCB BINDER VEF1040 C9410 CEJA1R0M50
C9803, C9805 CEJA220M25
C9207, C9343 CEJA221M6R3

Q DOLBY DIGITAL ASSY C9391, C9401, C9415, C9454
C9205, C9206
CEJA4R7M50
CEJANP100M10
SEMICONDUCTORS C9713, C9714, C9727, C9728 CEWAR220M25
IC9401 CS4226-KQ C9739, C9740 CEWAR220M25
IC9371–IC9373 KM68V1002AJ-15
IC9201 NJM2100M
IC9501 PD5502A
IC9374 PDK038A
43
VSX-808RDS
C9203, C9204, C9603, C9604 CEWAR4R7M50 6. ADJUSTMENT

C9615, C9616, C9627, C9628 CEWAR4R7M50
There is no information to be shown in this chapter.
C9103 CKSQYB102K50
C9101, C9107, C9153, C9313, C9322 CKSQYB103K50
C9332, C9333, C9342, C9344 CKSQYB103K50
C9350, C9351, C9353, C9354, C9367 CKSQYB103K50

C9374, C9378, C9382, C9636, C9637 CKSQYB103K50
C9158, C9504 CKSQYB104K16
C9407 CKSQYB224K16
C9330 CKSQYB474K16
C9430 CKSQYF103Z50
C9102, C9115–C9117, C9119, C9421 CKSQYF104Z25
C9423, C9431, C9607, C9608 CKSQYF104Z25
C9619, C9620, C9631, C9632 CKSQYF104Z25
C9709–C9712, C9723–C9726 CKSQYF104Z25
C9737, C9738 CKSQYF104Z25

C9323, C9325, C9327, C9335, C9337 CKSRYB103K50
C9339, C9346, C9347, C9352, C9361 CKSRYB103K50
C9385, C9626, C9642 CKSRYB103K50
C9705, C9706, C9719, C9720 CKSRYB104K16
C9733, C9734 CKSRYB104K16

C9633 CKSRYB122K50
C9703, C9704, C9717, C9718, C9731 CKSRYB222K50
C9406 CKSRYB223K50
C9359 CKSRYB562K50
C9701, C9702, C9715, C9716, C9729 CKSRYB682K50

C9732 CKSRYB682K50
C9123, C9125, C9451 CKSRYF103Z50
C9208, C9209, C9404, C9807 CKSRYF104Z16
RESISTORS
R9103, R9109, R9115, R9151, R9157 RS1/10S0R0J
R9378, R9380, R9382, R9386–R9388 RS1/10S0R0J
R9690 RS1/10S0R0J
R9108, R9121–R9123, R9125, R9126 RS1/10S101J
R9165–R9167 RS1/10S102J
R9107 RS1/10S222J
R9106, R9348, R9521, R9713, R9714 RS1/10S473J
R9727, R9728, R9741, R9742 RS1/10S473J
R9101 RS1/10S750J
OTHERS
JA9103–JA9105 GP1F32R
OPTICAL RECEIVE MODULE
JA9107 OPTICAL SEND MODULE GP1F32T
CN9801 15P SOCKET KP200TA15L
CN9802 7P SOCKET KP200TA7L

JA9101 1P PIN JACK VKB1077
X9501 CERAMIC RESONATOR ASS1055
(7.7MHz)
X9361 CERAMIC RESONATOR ASS7023
(20.000MHz)
X9401 CERAMIC RESONATOR RSS1052

(18.432MHz)
44
VSX-808RDS
7. GENERAL INFORMATION
7.1 PARTS
7.1.1 IC
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
PDG252A (FRONT ASSY : IC201)

• System Control Microcomputer
•Pin Arrangement (Top View)
S10/KEY1
G10
G11
G3
G4
G5
G6
G7
G8
G9
S1
S2
S3
S4
S5
S6
S7
S8
S9
G2/A2 100
G3/A3 99
G4/A4 98
G5/A5 97
G6/A6 96
G7/A7 95
G8/A8 94
G9/A9 93
G10/A10 92
G11/A11 91
G12/A12 90
VDD 89
G13/A13 88
G14/A14 87
G15/A15 86
A16 85
A17 84
A18 83
A19 82
A20 81
G2 1 G1/A1 A21 80 S11/KEY2
G1 2 G0/A0 A22 79 S12/KEY3
NC 3 NC A23 78 S13/KEY4
ACIN 4 PE0/EC0/INT PH7/A24 77 S14/KEY5
RDS_DT 5 PE1/EC1/INT PH6/A25 76 S15/KEY6
RDS_CK 6 PE2/INT2 PH5/A26 75 S16/KEY7
DSP_CS2 7 PE3/INT3/N PH4/A27 74 S17/KEY8
RMC 8 PE4/RMC PH3/A28 73 S18/KEY9
HPIN 9 PE5 PH2/A29 72 S19/KEY10
PLL_CE 10 PE6/PWM PH1/A30 71 S20/KEY11
Not used 11 PE7/TO/ADJ PH0/A31 70 S21/KEY12
KEYIN1 12 PC0/KR0 PG7/A32 69 S22/KEY13
KEYIN2 13 PC1/KR1 PG6/A33 68 VHVL
KEYIN3 14 PC2/KR2 PG5/A34 67 RY_A
FM+(RDS) 15 PC3/KR3 PG4/A35 66 RY_B
DSP_MT 16 PC4/KR4 PG3/A36 65 RY_A+B
ENC_A 17 PC5/KR5 PG2/A37 64 RY_C/R
ENC_B 18 PC6/KR6 PG1/A38 63 RY_HP
A.MUTE 19 PC7/KR7 PG0/A39 62 RY_AC
DSP_RST 20 PB0/CINT PF7/A40 61 Not used
DSP_CS1 21 PB1/CS0 PF6/A41 60 Not used
DSP_CK 22 PB2/SCK0 PF5/A42 59 Not used
DSP_SI 23 PB3/SI0 PF4/A43 58 ST_9274
DSP_SO 24 PB4/SO0 PF3/A44 57 LC4966
ST_EVR1 25 PB5/SCK1 PF2/A45 56 Not used
ST_EVR2 26 PB6/SI1 PF1/A46 55 V.MUTE
PLL_DO 27 PB7/SO1 PF0/A47 54 T.MUTE
28 AVREF PD7/A48 53 SVIDEO3
STEREO 29 PA1/AN0 PD6/A49 52 SVIDEO2
TUNED 30 PA1/AN1 PD5/A50 51 SVIDEO1
31 PA2/AN2
32 PA3/AN3
33 PA4/AN4
34 PA5/AN5
35 PA6/AN6
36 PA7/AN7
46 PD0/A55
47 PD1/A54
48 PD2/A53
49 PD3/A52
50 PD4/A51
39 EXTAL
37 AVSS
40 XTAL
45 VFIP
44 VDD
38 RST
41 VSS
43 TEX
42 TX
AMP_DC
AMP_OL
Not used
Not used
MVR_ATT
TPOWON
VIDEO1
VIDEO2
VIDEO3
SYS_DT
SYS_CK
45
VSX-808RDS
•Pin Function
No. Pin Name I/O Pin Function Active
1 G2 O Grid output 2 H
3 NC − Connect to VDD
4 ACIN I AC pulse input
5 RDS_DT I Serial control data signal for RDS communication
6 RDS_CK I Serial control clock signal for RDS communication (used for external interrupt)
7 DSP_CS2 I CS input from DSP microcomputer
8 RMC I Remote control signal input (no-carrier signal)
9 HPIN I Headphone connection detection (H : connect)
10 PLL_CE O Chip select signal for communication with LC72131 (tuner) H
11 Not used O Open
12 KEYIN1 I Key scan input 1
15 FM+(RDS) O Tr switch ON/OFF for power supply of RDS decoder (L : AM power off, H : others) H
16 DSP_MT I Mute requirement from DSP microcomputer (H : Mute requirement) H
17 ENC_A I Rotary encoder signal input A
18 ENC_B I Rotary encoder signal input B
19 AMUTE O Audio mute L
20 DSP_RST O Reset signal of DSP microcomputer L
21 DSP_CS1 O CS output to DSP microcomputer L
22 DSP_CK O Clock signal for communication with DSP microcomputer H
23 DSP_SI I Data input signal for communication with DSP microcomputer
24 DSP_SO O Data output signal for communication with DSP microcomputer H
25 ST_EVR1 O Strobe 1 for electric volume LC7535M H
26 ST_EVR2 O Strobe 2 for electric volume LC7535M H
27 PLL_DO I Data input signal for communication with LC72131 (tuner)
28 AVref − Connect to VDD
29 STEREO I Stereo/Monoral signal judgment signal
30 TUNED I TUNED information
31 AMP_DC I DC abnormality detection of protection circuit (L : Abnormality detection)
32 AMP_OL I Over-load detection of protection circuit (L : Abnormality detection)
33 Not used I
34 Not used I
35 MVR_ATT O ATT control of master volume (L : Less than -20dB) L
36 TPOWON O Tuner module ON/OFF (North America model only) H
37 AVSS − Connect to VSS
38 RST − Reset
39 EXTAL −
Connect to the oscillator (8MHz)
40 XTAL −
41 VSS − Connect to VSS
42 TX − Open
43 TEX − Connect to VSS
44 VDD − +5V
45 VFDP − -30V
46 VIDEO1
47 VIDEO2 O NJM2296D control H
48 VIDEO3
49 SYS_DT
O Clock signal for communication with LC7535M and TC9274N-001 H
50 SYS_CK
46
VSX-808RDS
No. Pin Name I/O Pin Function Active

51 SVIDEO1
52 SVIDEO2 O TC4051 control (S terminal control) H
53 SVIDEO3
54 TMUTE O Tuner mute H
55 VMUTE O Video mute L
56 Not used O Open
57 LC4966 O Input switch the DVD 6ch H
58 ST_9174 O Strobe signal for communication with TC9174 H
59 Not used O Open
60 Not used O Open
61 Not used O Open
62 RY_AC O AC relay ON/OFF H
63 RY_HP O Headphone relay ON/OFF H
64 RY_C/R O Rear/Center relay ON/OFF H
65 RY_A+B O Speaker A + B relay ON/OFF H
66 RY_B O Speaker B relay ON/OFF H
67 RY_A O Speaker A relay ON/OFF H
68 VHVL O Power switch for AMP system (H : VH) H
69 S22/KEY13 Segment output 22/key scan output 13
75 S16/KEY7 O Segment output 16/key scan output 7 H
82 S9 Segment output 9
85 S6 O Segment output 6 H
89 VDD − 5V
92 G11 Grid output 11
94 G9 Grid output 9
96 G7 Grid output 7
97 G6 Grid output 6
98 G5 Grid output 5
99 G4 Grid output 4
Note :• In the power off condition (with the remote control unit key or the main unit tact key), set to "L" excepting tuner mute (pin 54). However, it
nothing is done against to the input port.
• When pin 10 and 11 detect "L" at the reset, be careful because it enter the microcomputer's own test mode.
47
VSX-808RDS
7.1.2 DISPLAY
AAV7062 (FRONT ASSY : V201)
• FL Indicator Tube
• Pin Assignment
• Pin Connection
• Grid Assignment
48
VSX-808RDS
• Anode Connection
49
VSX-808RDS
7.2 DISASSEMBLY
1 Remove the Bonnet. (seven screws)
2 Release three binders ( 1 ) from the Power Transformer (T1).
3 Remove all screws which fixing the Chassis. Heat Sink Power Transformer (T1)
• INPUT Assy (eight screws 2 , Card Spacer 3 ) 4 3 8 ×4
5 7
• DSP Shield (screw 4 )
• Heat Sink (four screws 5 )
• AMP Assy (three screws 6 , Locking Card Spacer 7 )
• Power Transformer (T1) (four screws 8 )
• Rear Panel (three screws 9 ) 2 1 ×4
2
DSP Shield 2
6
2
2
INPUT Assy
6
Rear Panel 5
9 9 9
AMP Assy
4 Put the Power Transformer on the bottom side, and stand the component sideways.
Front
Power Transformer (T1)
50
VSX-808RDS
5 Open the Chassis and Rear Panel

It can be disgnosed under this condition.
Show the principal PCB Assemblies
in the illustration.
A
INPUT Assy
(Side B)
D
AMP Assy
(Side B)
Chassis
Rear Panel
Rear View
Q
Chassis DOLBY DIGITAL Assy
Front Panel
N
VIDEO Assy
O B
S VIDEO Assy FRONT Assy
J
TRANS 2 Assy
Rear Panel
Power Transformer (T1)
K
TRANS 1 Assy
Top View
51
52
Q
JA9107
JA9101
I
JA1461
JA9105
VSX-808RDS
JA9104
JA9103 D
RY401 G
CN627
A D
IC301, IC302, IC303 IC401, IC402, IC403 G
A RY628
7.3 BLOCK DIAGRAM
IC102, IC103
G
RY626 G
A A A RY627
JA101 IC101 IC109

JA102 Q CN652
JA103 H
CN104
P H
CN601
RY651, RY652
A
IC310 H JA653
TAPE2 IN
TAPE2 OUT
N
CN504
D JA413
O
N IC552
JA501
JA502
N O
IC501 IC551
P CN551-CN553 CN551-CN553
CN601 O O
VSX-808RDS
7.4 REMOTE CONTROL UNIT [CU-VSX140 (AXD7181)]

7.4.1 Exploded Views and Parts List
• Screws adjacent to mark on the product are used for disassembly.
• Parts List
2
1 Filter AZA7152
2 Name Plate AZA7317
3 Rubber Sheet (A) AZA7308
4 Rubber Sheet (B) AZA7307
5 Spring (+) AZB7049
9
6 Spring (–) AZB7050
7 Spring AZB7051
16 12
15 8 Screw AZB7052
9 Remo-con Case (A) AZN7738
10 Remo-con Case (B) AZN7326
13
14 11 Battery Cover AZN7327
12 Main Key (FF) AZN7751
13 Main Key (STOP) AZN7741
14 Main Key (REV) AZN7752
15 Main Key (PAUSE) AZN7742
16 Main Key (PLAY) AZN7664

4 NSP 17 PCB AZW7248
3
17
10
7
11
53
B
A
D
C
54
SWITCHES
K01 : RECEIVER (POWER)
K02 : TV (POWER)
K03 : MUTING
1
1
K04 : POWER
K05 : TV FUNC.
K06 : VOL.-
K07 : VOL.+
K08 : DISP MODE
VSX-808RDS
K09 : MPX
K10 :
Downloaded from www.Manualslib.com

K11 :
D9 - D17 : CL-230HR-CD × 9 K12 : ENT.
R8 - R16 : 240Ω × 9 K13 : CH-
K14 : CH+
K15 : DVD/LD
7.4.2 Schematic Diagram
K16 : TV/SAT
K17 : CD
K18 : VCR1
R8 R9 R10 K19 : TUNER
2
2
manuals search engine

D9 D10 D11 K20 : TV CONTROL
Q2 Q3 Q4 K21 : VCR2
R5 K22 : AMP
100kΩ K23 : MD/TAPE
R6 K24 :1
P0D3 K25 :2
R11 R12 R13
100kΩ IC1 K26 :3
P0D2
D12 D13 D14 P0D1 AZC7282 R7 K27 :4
P0E3 100kΩ K28 :5
P0E2 1 28 K29 :6
P0D2 P0D1
P0E0 K30 :7
2 27 K31 :8
P0D3 P0D0
K32 :9
R14 R15 R16 3 26 K33 :0
INT P0C3
K34 : +10
4 25 K35 : MENU
D15 D16 D17 P0E0 P0C2
K36 : DIRECT
3
5
3
24 K37 : FUNCTION
P0E1 P0C1
K38 : FL DIMMER
Q2 - Q4 : RN4605 × 3 6 23 K39 : MODE CHECK
R18 P0E2 P0C0
0 22 K40 : COMMANDER SET UP
7 P0B3
D1 P0E3 8 16 24 32 40
SE303A-C 8 21 R3
REM P0B2 7 15 23 31 39 47Ω
R1 R2 C3 9 20
1.8Ω 220Ω VDD P0B1 6 14 22 30 38
1/50 T1 10 19 C1 C2
XOUT P0B0 5 13 21 29 37
11 18 3.0V 220/6.3 47/10
Q1 XIN P0A3 4 12 20 28 36
2SC3265 12 17
X1
GND P0A2 3 11 19 27 35
4.0MHz
13 16
RESET P0A1 2 10 18 26 34
4
4
KEY No.
14 15
WDOUT P0A0 1 9 17 25 33 T5
No.
T2 T3 T4
D2
C4
RLS-73
1/50
Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
1 2 3 4
VSX-808RDS
7.4.3 PCB Diagram
K01 K02
K04
K03 K05
K10
K09 K12 K08 B
K11
K06 K07
K13 K14
K15 K16 K17
K18 K20 K19
C
K21 K22 K23
K24 K25 K26 K27
K28 K29 K30 K31
K32 K33 K34 K35
K37 K36 K38
K39 K40
D
SIDE A SIDE B
55
Downloaded from www.Manualslib.com 1manuals search engine 2 3 4
VSX-808RDS
7.4.4 PCB Parts List

NOTES: ¶Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
¶The mark found on some component parts indicates the importance of the safety factor of the part.
¶When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω = 56 × 101 = 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω = 47 × 103 = 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω = R50 ..................................................................................... RN2H Â 5 0 K
1Ω = 1R0 ..................................................................................... RS1P 1 Â 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω = 562 × 101 = 5621 ...................................................... RN1/4PC 5 6 2 1 F

SEMICONDUCTORS
IC1 AZC7282
Q1 2SC3265
Q2-Q4 RN4605
D1 SE303A-C
D2 RLS-73
D9-D17 CL-230HR-CD
CAPACITORS
C2 CEAT470M10
C1 CEAT221M6R3
C3,C4 CEATR10M50
RESISTORS
R1 RS1/8S1R8J
OTHERS
X1 CERAMIC RESONATOR KBR-4.0M
(4MHz)
56
VSX-808RDS
8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
Front Section
1 2 3 4 5 6 7890 - = ~ ! @ #$ % ^& * (
MASTER
VOLUME
STANDBY
CHARACTER / DTS DSP

CLASS MEMORY RF ATT /SEARCH MPEG MODE
STANDBY/ON
TUNING EON SIGNAL DIGITAL

– STATION + SELECT MODE SELECT MIDNIGHT NR
– FREQUENCY +
– OFF - ON
DOWN UP
BASS TREBLE
VIDEO INPUT
SPEAKERS LOUDNESS – + – + DIRECT
TAPE 2
MONITOR
PHONES S-VIDEO VIDEO L AUDIO R
VCR 1 VCR 2 DVD/LD TV/SAT CD FM/AM MD/TAPE 1 VIDEO
DVD 5.1CH
EON
) _ + ¡ ™
1 Main power switch (— OFF, _ ON) 0 SPEAKERS button

Press repeatedly to switch between A and B speaker
2 STANDBY/ON button systems as follows.
Press to switch the receiver on or put in standby. 3A 3B 3 A+B 3 OFF
3 STANDBY indicator
Lights when the receiver is in standby mode. (Please
note that this receiver consumes a small amount of - LOUDNESS button
power (2 W) during the standby mode.) Switches the loudness on or off. Use to raise the level of
4 CLASS button the bass and treble so they can be more easily heard
Press repeatedly to switch the preset station classes. when listening at low volumes.
= BASS (+/–) button
Press to adjust low frequencies in the range of ±6.
5 MEMORY button ~ Display
Press to memorize a preset station.
! TREBLE (+/–) button
Used to adjust high frequencies in the range of ±6.
6 RF ATT button @ DIRECT button
Set this button to on when receiving strong FM signals Switches direct playback on or off. Use to bypass the
(nearby stations) to reduce sound distortion. Normally, receiver’s tone control circuitry or level control for higher
this button should be set off. This button does not affect fidelity to the program source. When DIRECT is ON,
AM reception. Dolby, DSP, LOUDNESS, DIGITAL NR and MIDNIGHT
7 TUNING SELECT button mode are automatically turned OFF.
Press to switch between STATION and FREQUENCY. # Remote sensor
8 CHARACTER/SEARCH button Point the remote control toward the remote sensor to
Press to select the character input mode, or initiate an operate the receiver.
RDS PTY search. $ /DTS MPEG button
Press repeatedly to select the standard Dolby/DTS,
9 EON MODE button MPEG mode and the ADVANCED THEATER modes.
Press to select the EON mode.
57
VSX-808RDS
% SIGNAL SELECT button

Use to select input signals for the digital components.
First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR 1
(+, Function buttons) to select the component, then
press SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : Selects the analog (R and L) audio signals.
DIGITAL : Selects the digital audio signals. This receiver
automatically detects and displays the format of the
signal being input. AC-3 lights when Dolby Digital signals
are input, DTS lights when DTS signals are input, and
MPEG lights when MPEG signals are input. (AC-3 and
DTS decoding is switched automatically.)
• SIGNAL SELECT is fixed in the “ANALOG” position
for components not assigned to one of the four
digital input jacks.
• Because the audio from a karaoke microphone and LD
recorded with analog audio only is not output from the
digital output, set SIGNAL SELECT to “ANALOG”.
• This receiver can only play back Dolby Digital, PCM
(32kHz, 44kHz, and 48kHz), DTS, and MPEG digital
signal formats. With digital signal formats other than
these, set SIGNAL SELECT to “ANALOG”.
^ DSP MODE button
Press repeatedly to select a DSP sound mode (HALL 1,
HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2).
Use these modes to produce surround sound from
standard (two channel) stereo sources.
& MIDNIGHT button
Press to hear effective surround sound at low volume
levels. The effect is automatically adjusted according to
the volume level.
* DIGITAL NR button
Switches DIGITAL NR on or off. Use to reduce noise in
digital audio sources.
( MASTER VOLUME
After turning on the desired component, rotate to adjust
the volume.
) PHONES jack
Connect headphones for private listening (the speakers
turn off automatically).
_ STATION/FREQUENCY (+/–) button
STATION: Press to select the preset channel.
FREQUENCY: Press to select the frequency.
+ Function buttons
Selects the function. Each press switches the DVD/LD
input between DVD/LD and DVD 5.1 channel.
¡ TAPE 2 MONITOR button
Switches the TAPE 2 monitor on or off.
™ VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the
VIDEO INPUT jacks.
58
VSX-808RDS
Display
1 2 3 4 5 6 78 9 0 - =~ ! @
H.P SP AB
SIGNAL MPEG SFC 5-D THEATER DIRECT TAPE2 MONO
SELECT ATT MIDNIGHT DNR LOUDNESS STEREO TUNED
ANALOG PRO LOGIC EON
DIGITAL DIGITAL
RDS RF ATT
AC-3 L C R
DTS LS S RS
MPEG LFE dB
# $ % ^ & *
1 SIGNAL SELECT indicators 0 DIRECT indicator

Light to indicate the type of input signal selected for the Lights when direct playback is on (refer to “Front Panel”,
current component (refer to “Front Panel”, %, SIGNAL @, DIRECT).
SELECT).
ANALOG : Lights when the analog audio signals are selected. - TAPE 2 indicator
DIGITAL : Lights when the digital audio signals are selected. Lights when TAPE 2 MONITOR is on.
AC-3 : Lights when a source with Dolby Digital signals is played. = Tuner indicators
DTS : Lights when a source with DTS audio signals is played.
STEREO : Lights when an FM stereo broadcast is
MPEG : Blinks when the MPEG mode is selected, and lights received in the auto stereo mode.
when a source with MPEG audio signals is played.
TUNED : Lights when a broadcast is received.
2 Digital indicators MONO : Lights when the tuner is set to receive FM
dts : Lights when DTS signals are input. (Dolby/DTS/ broadcasts in monaural.
MPEG mode is ON) ~ H.P indicator
MPEG : Lights when MPEG signals are input. (Dolby/ Lights when headphones are plugged in.
DTS/MPEG mode is ON)
! Speaker indicators
PRO LOGIC : When the Dolby mode on the receiver is
on, this indicator lights during 2 channel playback of Light to indicate the current speaker system (refer to
Dolby Digital sources. “Front Panel”, 0, SPEAKERS (A/B)).
DIGITAL : When the Dolby mode on the receiver is on, SP 3 A : Lights when speaker system A is selected.
this indicator lights to indicate playback of a Dolby Digital SP 3 B : Lights when speaker system B is selected.
signal. However, PRO LOGIC lights during 2 channel
playback of Dolby Digital. @ EON and EON reception indicators
3 SFC (DSP) mode indicator EON indicator lights when the EON mode is on. EON
reception indicator lights when an RDS station
Lights when the DSP mode or ADVANCED THEATER transmitting the EON data service is being received.
mode (except for 5-D THEATER) is selected.
# Program format indicators
4 ATT indicator
The following indicators light to show the channels being
Lights when ATT (refer to “Remote Control”, 7, Number
buttons) is used to reduce the level of the input signal played back.
(available in ANALOG mode only). L : Left front*1*2, C : Center*1, R : Right front*1*2,
LS : Left surround*1, S : Surround (mono)*2,
5 Overload indicator RS : Right surround*1
When “ANALOG” is selected in SIGNAL SELECT, this *1: Indicates 5.1ch Dolby Digital playback.
indicator lights to show that an excessively strong signal *2: Indicates Dolby surround playback.
is being processed. When this occurs, press ATT on the
remote control to attenuate the signal. Also, when $ LFE indicator
“DIGITAL” is selected in SIGNAL SELECT, this indicator LFE (Low Frequency Effects) indicator lights to indicate
lights to show that a source containing an excessive that the program source contains an LFE channel. The
amount of information is being processed. When this indicator to the left of LFE lights during actual playback of
occurs. the LFE signals (LFE signals are not present in all parts
of the sound track).
6 5-D THEATER indicator
Lights when 5-D THEATER is selected. % Character display
7 MIDNIGHT indicator ^ RDS indicator
Lights when the MIDNIGHT mode is on. Lights when RDS broadcast is received.
8 DNR indicator & Volume level display

Displays the volume level. Volume level is maintained
Lights when the DIGITAL NR is on.
even when the power is off. ---dB indicates the minimum
9 LOUDNESS indicator level, and 0dB indicates the maximum level.
Lights when loudness is on (refer to “Front Panel”, -, • Depending on the level settings for individual
LOUDNESS). channels, the MAX level can range between –10dB
and 0dB.
* RF ATT indicator
59
VSX-808RDS
Remote Control Unit

These pages describe the buttons on the remote control 6 MULTI CONTROL buttons
used to operate the receiver. Use these buttons to select the remote operation mode.
0 For example, pressing TUNER sets the remote to
operate the tuner functions.
RECEIVER TV 7 Number buttons
1 These buttons can perform a variety of different functions
depending on the remote operation mode.
2 G
TV
FU - • [RECEIVER operations (press RECEIVER first)]
TIN NC
MU FQ
+ : Press repeatedly to select the standard mode, the
3 MPX
ENTER
DISP
MODE
ADVANCED THEATER modes and MPEG mode.
–
FQ DSP MODE : Press repeatedly to select a DSP sound
VOL VOL mode.
4 CHANNEL
MIDNIGHT : Press to hear surround sound effectively at
low volumes.
5 MULTI CONTROL CH.SELECT : Use to select a speaker when adjusting
DVD/LD TV/SAT CD speaker levels.
6 VCR 1 TV CONTROL TUNER TEST TONE : Press to switch the test tone on or off
VCR 2 RECEIVER MD/TAPE = when listening to a surround mode.
DSP MODE MIDNIGHT ATT : Press to attenuate (lower) the level of the input
1 2 3 4
CH.SELECT TEST TONE
signals and prevent distortion (refer to “Display”, 5,
ATT SIG.SELECT
Overload indicator).
7 5
CH.LEVEL
6 7
EFFECT
8
SIG.SELECT : When the same component uses both
9 0 +10
CLASS
MEMU
TV/VCR
analog and digital connections, use to select input signals
FUNCTION DIRECT FL DIMMER as digital or analog.
8 COMMANDER ~ CH.LEVEL (–/+) : Use to adjust individual speaker levels.
MODE CHECK SET UP
9 ! EFFECT (+/–) : Use to adjust the DSP mode effect level.
Î
• [TUNER operations (press TUNER first)]
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
Number buttons (0~9) : During preset tuning, use to
@ input the number of the preset station. Use to input the
station frequency during direct tuning.
CLASS (+10) : Press repeatedly to switch the preset
station classes during preset tuning.
1 RECEIVER button MENU : Press to activate direct tuning.
Press to switch the receiver on or to put in standby.
8 FUNCTION button
2 MUTING button Press repeatedly to select a source.
Press to mute the volume. “MUTING” appears in the 9 MODE CHECK button
display. Press again to cancel. Press to confirm the current remote operation mode and
3 [When set to SURROUND] to switch operation modes without changing the source .
%, fi, @, #, (Select/Adjust) buttons
0 Power button
[When set to other than OPERATIONS] Press to turn on or put in standby all connected
*(Pause), &(Stop), !(Rewind), ⁄(Fast Forward), components other than this unit.
ENTER/‹(Play) buttons
- TV/TV FUNC button
[Tuner Operations] Press TV to turn the TV’s power on or put in standby.
FQ + (to higher frequencies), FQ – (to lower frequencies), Press TV FUNC to select the TV for remote control
MPX, DISP MODE, # (FM/AM) buttons operation.
MPX: Use to switch the auto stereo/monaural mode for = RECEIVER button
receiving FM broadcasts. When the received broadcast Press to select the receiver for remote control operation.
signal is weak, press this button to set the monaural ~ FL DIMMER button
mode. Press to adjust the brightness of the fluorescent display.
DISP MODE: Use to switch the RDS data while listening Four levels of brightness ranging from very dim to very
to an FM station. Each press changes the display in the bright can be selected.
order of RT, PS, PTY, and frequency. ! COMMANDER SET UP button
4 VOL (+/–) buttons Use to customize the remote control functions.
Press to adjust the volume. When VOL (+/–) buttons are
pressed while muting, muting is canceled.
@ DIRECT button
5 CHANNEL (+/–) button Use to playback original source audio. When DIRECT is
Use to select preset stations when operating the tuner. ON, Dolby, DSP, LOUDNESS, DIGITAL NR and
When the remote is used to control other components, MIDNIGHT mode are automatically turned OFF.
this button may be used to change channels, tracks, or
chapters.
60
VSX-808RDS
Audio Components Connections

Be sure to switch power to standby and remove the power cord from the wall outlet when you make or change
connections.
Connect your audio components as shown below.
FRONT SPEAKERS
ANTENNA
R L
DIGITAL IN
A
OPT FM AM
1 PCM/ UNBAL LOOP
/DTS/MPEG 75Ω ANTENNA
S S S S S S
OPT IN IN IN OUT IN OUT
DVD 5.1 CH
2 INPUT TO
MONITOR
S B
SURROUND OUT
OPT L SUBWOOFER TV
3
R L
OPT CONTROL VIDEO
OUT IN OUT IN IN IN OUT IN OUT
CENTER
DIGITAL PREOUT
VIDEO
OUT
COAX R CENTER
IN OUT IN IN OUT IN IN IN OUT IN OUT SUB
WOOFER
PREOUT
L L CENTER
SPEAKER
SURROUND
SPEAKERS
PCM/
/DTS/MPEG
DIGITAL
IN
R R
PLAY REC PLAY REC TV/ DVD/
SAT LD VCR 1 VCR 2
MD/TAPE 1 CD TAPE 2 MONITOR DVD 5.1 CH
FRONT
» « «
»
PLAY REC » OUTPUT PLAY REC
L L L L L
R R R R R
MD recorder
CD player Cassette deck
or Cassette deck
*The arrows indicate the direction of the audio signal.
7 Audio cords Cassette deck placement

Use audio cords (not supplied) to connect the audio
components. Depending on where the cassette deck is placed, noise may
occur during playback of your cassette deck which is caused
L
Connect red plugs to R (right) by leakage flux from the transformer in the receiver. If you
and white plugs to L (left). experience noise, move the cassette deck farther away from
Be sure to insert completely. the receiver.
R
61
VSX-808RDS
8.2 SPECIFICATIONS
Amplifier Section FM Tuner Section
Frequency Range ........................................ 87.5 MHz to 108 MHz
Continuous average power output of 80 watts*
Usable Sensitivity ..................... Mono: 15.2 dBf, IHF (1.5 µV/75 Ω)
per channel, min., at 8 ohms, from 20 Hz to 50 dB Quieting Sensitivity ....................................... Mono: 20.2 dBf
20,000 Hz with no more than 0.09 %** total Stereo: 41.2 dBf
harmonic distortion (front; stereo mode). Signal-to-Noise Ratio ................................ Mono: 76 dB (at 85 dBf)
Stereo: 72 dB (at 85 dBf)
Continuous Power Output Distortion ....................................................... Stereo: 0.6 % (1 kHz)
(DIN, 1 kHz, T.H.D. 1%, 8 Ω) Alternate Channel Selectivity ................................ 70 dB (400 kHz)
STEREO Front ........................................ 100 W + 100 W Stereo Separation ..................................................... 40 dB (1 kHz)
SURROUND Front ............................................ 60 W + 60 W Frequency Response .............................. 30 Hz to 15 kHz (± 1) dB
Center ....................................................... 60 W Antenna Input ....................................................... 75 Ω unbalanced
Rear .......................................................... 60 W Sensitivity (DIN) ..................................... Mono: 1.1 µV (S/N 26 dB)
Input (Sensitivity/Impedance) Stereo: 50 µV (S/N 46 dB)
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, Signal-to-Noise Ratio (DIN) ........................................ Mono: 62 dB
MD/TAPE 1, TAPE 2 .......................................... 200 mV/47 kΩ Stereo: 58 dB
Frequency Response
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1, TAPE 2 ......................... 5 Hz to 100,000 Hz –3 dB
+0 AM Tuner Section
Output (Level/Impedance) Frequency Range ......................................... 531 kHz to 1,620 kHz
VCR 1 REC, VCR 2 REC, MD/TAPE 1 REC, Sensitivity (IHF, Loop antenna) ....................................... 350 µV/m
TAPE 2 REC ..................................................... 200 mV/2.2 kΩ Selectivity ............................................................................... 30 dB
Tone Control Signal-to-Noise Ratio ............................................................. 50 dB
BASS .................................................................. ± 6 dB (100 Hz) Antenna ..................................................................... Loop antenna
TREBLE ............................................................. ± 6 dB (10 kHz)
LOUDNESS ................................. +9 dB/+7 dB (100 Hz/10 kHz) Miscellaneous
Signal-to-Noise Ratio [DIN (Rated power output/50 mW)]*
Power Requirement ................................. AC 220-230 V, 50/60 Hz
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
Power Consumption .............................................................. 220 W
MD/TAPE 1, TAPE 2 ............................................. 82 dB/62 dB
Power Consumption in Standby mode ...................................... 2 W
Dimensions ................................. 420 (W) × 158 (H) × 401 (D) mm
VIDEO Section Weight (without package) ...................................................... 9.8 kg
Input (Sensitivity/Impedance)
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO ................ 1 Vp-p/75 Ω Furnished Parts
Output (Level/Impedance)
FM Antenna ................................................................................... 1
VCR 1, VCR 2, MONITOR ....................................... 1 Vp-p/75 Ω
AM Loop Antenna ......................................................................... 1
Frequency Response
+0 Dry Cell Batteries (SIZE “AA” (IEC LR6)) ..................................... 2
VCR 1, VCR 2, MONITOR ........................... 5 Hz to 7 MHz –3 dB
Remote Control Unit ..................................................................... 1
Signal-to-Noise Ratio ............................................................. 55 dB
Operating Instructions ................................................................... 1
Cross Talk .............................................................................. 55 dB
* Direct: ON NOTE:
** Measured by Audio Spectrum Analyzer. Specifications and the design are subject to possible modifications without
notice, due to improvements.
The MPEG logo is a registered trademark of Royal Philips Electronics.
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
Manufactured under licence from Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic”, and double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby Laboratories, Inc. All
rights reserved.
Accessories
FM wire antenna AM loop antenna Remote control unit “AA” IEC LR6 batteries × 2
(ADH7005) (ATB7009) (CU-VSX140 : AXD7181)
62

VSX-808RDS: Audio/Video Multi-Channel Receiver

Uploaded by

Copyright:

Available Formats

VSX-808RDS: Audio/Video Multi-Channel Receiver

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VSX-808RDS: Audio/Video Multi-Channel Receiver

Uploaded by

Copyright:

Available Formats

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

CHARACTER / DTS DSP

TUNING EON SIGNAL DIGITAL

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

(FOR USA MODEL ONLY)

1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS

LEAKAGE CURRENT CHECK

2. EXPLODED VIEWS AND PARTS LIST

5 6 (1) PACKING PARTS LIST

(2) CONTRAST TABLE

31 57 P (HVXJI Type Only)

(1) EXTERIOR PARTS LIST

(2) CONTRAST TABLE

FM/AM TUNER P Q Q 1/3- Q 3/3

(AXX7048) DOLBY DIGITAL

POWER TRANSFORMER (T1)

3.2 INPUT ASSY (1/2)

Downloaded from www.Manualslib.com 5manuals search engine 6 7

3.3 INPUT ASSY (2/2)

Downloaded from www.Manualslib.com 5manuals search engine 6 7

Downloaded from www.Manualslib.com 5manuals search engine 6 7

3.5 AMP (1/2), F.SP.CONNECT, R.C.SP.CONNECT, FRONT LARGE

D 2/2 D 1/2 AMP ASSY(1/2)

G FRONT LARGE ASSY

F R.C.SP. CONNECT ASSY

Downloaded from www.Manualslib.com 5manuals search engine 6

3.6 AMP (2/2), HEADPHONE, TRANS 2, TRANS 1, BARRIER, FET

CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,

NEUTRAL AC POWER CORD

Downloaded from www.Manualslib.com 5manuals search engine 6

3.7 VIDEO, SVIDEO and FRONT VIDEO ASSYS

Downloaded from www.Manualslib.com 5manuals search engine 6 7

3.8 DOLBY DIGITAL ASSY (1/3)

Downloaded from www.Manualslib.com 5manuals search engine 6 7

3.9 DOLBY DIGITAL ASSY (2/3)

Q 2/3 DOLBY DIGITAL ASSY(2/3)

Downloaded from www.Manualslib.com 5manuals search engine 6 7

Q 3/3 DOLBY DIGITAL ASSY(3/3)

Downloaded from www.Manualslib.com 5manuals search engine 6 7

4. PCB CONNECTION DIAGRAM

P FRONT VIDEO ASSY

Q CN9802 Q CN9801 N CN507

Downloaded from www.Manualslib.com 5manuals search engine 6 7

C POWER Q202 Q205 Q204 Q282 Q281 IC281 Q203 Q201

Q201 Q207 Q206 Q283

Downloaded from www.Manualslib.com 5manuals search engine 6 7

4.3 AMP, HEADPHONE, FET and MECH SW ASSYS

Q403 Q407 Q404 Q1404 Q1405

IC701 Q701 Q454

Downloaded from www.Manualslib.com 5manuals search engine 6 7

4.4 F.SP.CONNECT, R.C.SP.CONNECT, FRONT LARGE

4.5 TRANS 2, TRANS 1 and BARRIER ASSYS

POWER TRANSFORMER (T1)

Line Voltage Selection

Downloaded from www.Manualslib.com 1manuals search engine 2 3

4.6 DOLBY DIGITAL ASSY

Q9604 IC9603 IC9705

Q9601 IC9602 IC9361

Q9203 Q9204 Q9401