Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    Pre Cast Lifting

    Uploaded by

    Tuan Vu
    The document discusses lifting eyes used for lifting loads of 1.5 tons and 5 tons. It notes that one of the lifting eyes broke due to frequent loading and unloading operations. It states that frequent pulling of the load caused fatigue and eventual breaking of the lifting eye. It also contains tables with specifications on minimum bend diameters for rebar sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pre Cast Lifting

    Uploaded by

    Tuan Vu
    23 views16 pages
    The document discusses lifting eyes used for lifting loads of 1.5 tons and 5 tons. It notes that one of the lifting eyes broke due to frequent loading and unloading operations. It states that frequent pulling of the load caused fatigue and eventual breaking of the lifting eye. It also contains tables with specifications on minimum bend diameters for rebar sizes.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses lifting eyes used for lifting loads of 1.5 tons and 5 tons. It notes that one of the lifting eyes broke due to frequent loading and unloading operations. It states that frequent pulling of the load caused fatigue and eventual breaking of the lifting eye. It also contains tables with specifications on minimum bend diameters for rebar sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views16 pages

    Pre Cast Lifting

    Uploaded by

    Tuan Vu
    The document discusses lifting eyes used for lifting loads of 1.5 tons and 5 tons. It notes that one of the lifting eyes broke due to frequent loading and unloading operations. It states that frequent pulling of the load caused fatigue and eventual breaking of the lifting eye. It also contains tables with specifications on minimum bend diameters for rebar sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 16

    Pre-cast safety

    Lifting eyes Dia. = 25mm

    Sankyu Project
    Load: 1.5T
    Dia. 32mm

    Liftin
    g 5T

    eyes
    Tai móc tải bị gẫy do lôi tải nhiều lần

    Do kéo tải qua lại


    nhiều lần, tai móc
    tải bị mỏi và đứt
    gẫy
    required
    Minimum bending
    xd

    Rebar size Norminal diameter (d) Min. bend diameter


    #3 10mm 6d
    #4 12mm 6d
    #5 16mm 6d
    #6 20mm 6d
    #7 22mm 6d
    #8 25mm 6d
    #9 28mm 8d
    #10 32mm 8d
    #11 35mm 8d
    #14 43mm 10d
    #18 57mm 10d
    ACI 318-02 section 7.2
    ttp://rebar.ecn.purdue.edu/wwr/resDesign_codeStand.htm
    7.2- Minimum bend diameters
    7.2.1- Diameter of bend measured on the inside of the bar, other than for stirrups and ties in sizes No.3 through No.5,
    shall not be less than the values in Table7.2.
    7.2.2 - Inside diameter of bend for stirrups and ties shall not be less than 4db for No.5 bar and smaller. For bars larger than
    No.5, diameter of bend shall be in accordance with Table 7.2.
    7.2.3 - Inside diameter of bend in welded wire fabric (plain or deformed) for stirrups and ties shall not be less than 4db for
    deformed wire larger than 06 and 2db for all other wires. Bends with inside diameter of less than 8db shall not be less
    than 4db from nearest welded intersection.
    Rebar sizes
    http://www.reinforcing-
    bar.com/technology/reinforcing-bar-sizes.html
    hế tạo cột
    st như thế
    t bất tiện cho
    ẩu lắp dựng:
    cẩu dễ bị tổn
    ương;
    ó móc cáp, dễ
    ọ sát cáp với
    .
    Phải bảo vệ cáp bẹ
    Làm nòng sẵn
    Dùng spreader bar

    You might also like