Scribd
Upload
929 views1 page

NGR Test Report - 1940155

The document is a test report for a neutral grounding resistor. It provides specifications for the resistor including a rated voltage of 22/√3 kV and rated resistance of 17Ω. It details routine tests performed on the resistor including measuring the DC resistance value of 17Ω and paint/galvanization thickness of 190 μm, both of which met acceptance criteria. High voltage insulation and DC impulse tests were also performed and passed criteria.

Uploaded by

Riad Riad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
929 views1 page

NGR Test Report - 1940155

The document is a test report for a neutral grounding resistor. It provides specifications for the resistor including a rated voltage of 22/√3 kV and rated resistance of 17Ω. It details routine tests performed on the resistor including measuring the DC resistance value of 17Ω and paint/galvanization thickness of 190 μm, both of which met acceptance criteria. High voltage insulation and DC impulse tests were also performed and passed criteria.

Uploaded by

Riad Riad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NEUTRAL GROUNDING RESISTOR

TEST REPORT

CUSTOMER : QATARI INDUSTRIAL PRODUCT SERIAL NUMBER : 1940155


PRODUCT CODE : NGR ORDER NO : YS.19.12.88

PRODUCT SPECIFICATIONS
System Voltage : 22 kV Rated Voltage : 22/√3 kV
Rated Current : 750 A Rated Resistance : 17Ω ; @20⁰C ±%5
Rated Time : 30sec Enc. Protection Class : IP55
LV Ter. Ins. Class : 1,2kV MV Ter. Ins. Class : 24kV
: 750/1A PX : 750/1A 5P20
Current Transformer - 1 Current Transformer - 2
2019/37834 2019/37839

ROUTINE TESTS
MEASUREMENT OF DC RESISTANCE VALUE
Ambient Temperature : 22°C Test Date :14.02.2020
Measured Value : 17Ω Acceptance Criteria : Rn±5%
: GW-INSTEK
Measurement Device Test Result :OK ☒ NOK ☐
MilliOhmMeter
PAINT AND GALVANIZATION THICKNESS MEASUREMENT
Ambient Temperature : 22°C Test Date :14.02.2020
Measured Value : 190 µm Acceptance Criteria : ≥50 µm
: ElektroPhysik
Test Result :OK ☒ NOK ☐ Measurement Device
Coating Thickness Gauge
Insulation Test

Ambient Temperature : 22°C Test Date :14.02.2020

Applied Value :50,3kV, for 1 min at50Hz Acceptance Criteria : 50kV, for 1 min. at 50Hz

: MULTITEK
Test Result :OK ☒ NOK ☐ Measurement Device
AC High Voltage Tester
DC Impulse Test
Ambient Temperature : 22°C Test Date :14.02.2020
: 5kVDC, : 5kVDC,
Applied Value Acceptance Criteria
for 1 min. at 50Hz for 1 min. at 50Hz
Insulation Resistance : 6,52 GΩ Test Result :OK ☒ NOK ☐
Measurement Device : METREL TeraOhm 5 kV

TESTED BY APPROVED BY CUSTOMER APPROVAL


ÖMER FARUK CİCİ Didem ERGUN SEZER
Electrical Engineer Electrical Engineer

You might also like