Product Specification: Customer Name: Customer Product Name: Dusun Product Name: Date of Issue: Revision
Product Specification: Customer Name: Customer Product Name: Dusun Product Name: Date of Issue: Revision
Product Specification: Customer Name: Customer Product Name: Dusun Product Name: Date of Issue: Revision
PRODUCT SPECIFICATION
CUSTOMER NAME:
CUSTOMER PRODUCT NAME:
DUSUN PRODUCT NAME: programmable and mulit-protocol
mini IoT gateway
DATE OF ISSUE:
REVISION: V1.0
1. Brief introduction
1.1 Overview
It is a Zigbee/bluetooth-Ethernet/Wi-Fi Gateway, be used for smart digital home application.As the core of
smart home, intelligent gateway acts as a system of "brain" or "heart" role. It support zigbee3.0 and
Zigbee@Greenpower protocol, It also support Bluetooth protocol. The senor with zigbee3.0 or
zigbee@Greenpower protocol can connect to the gateway, like door sensor , PIR sensor ,temperature sensor
etc. It collect the sensor data , and sent the data to the cloud by ethernet or Wi-Fi .
2.1 Power on
Power on : when gateway are without setting and network connecting, the 3 LED red/yellow/green will
continues lighting ,until initialize successfully, Then,gateway enter the system , the symbol is Green LED
flashing at 2HZ . The Green LED is lighting , The system is running successfully. If user set the network before
now , it can connect to network automatic . Otherwise, It will be need to set the network . When it connect the
network successfully, The Red LED is light off , otherwise, the Red LED is light .
2.2 Buttons
Reset button:
Short press on reset button: press the key within 5sec., gateway shift to samrtconfig mode . Mobile phone
could set the network with the app durning the time ,Yellow LED flash at 2HZ frequency.
Long press on reset button:press the button more than 5s., gateway back to factory mode,all the pairing
information is cleared. Gateway in AP mode ,green LED flash at 2HZ frequency.
Pairing button:
press on pairing button:press the button within 5s. ,gateway enter in to Zigbee pairing mode,yellow LED
flash at 2HZ frequency, if pairing succeed ,Yellow LED flash at 5HZ frequency 10times and then turn off. If the
pairing time more than 30s, pairing overtime ,yellow LED will turn off ; if the pairing is interrupt,the red LED flash
at 5HZ for 10times and then turn off.
2.4 SamrtConfig
When the gateway under SmartConfig mode, The User can set the network with app . Just press one key
to finish it , It’s easy to set the network .