Ficha Tecnica de Volquete

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Volvo Trucks.

Driving Progress

New FMx13 8x4 Rigid Air Suspension FMX 84RF 3A

3105
,968

Cab 2490

Chassis Dimensions [mm]


WB Wheelbase 4600 5100 5600
A Overall Chassis Length 8315 8815 9315
D Center of rear axle to front of body 4028 4528 5028
N Rear Overhang (Min.) 1225 1225 1225
N Rear Overhang (Max.) 825 825 825
T Theoretical Wheelbase 4288 4788 5288
Y Center of Gravity for Payload (Min.) 389 526 663
Y Center of Gravity for Payload (Max.) 389 526 663
W Body Length (Min.) 7278 8003 8730
W Body Length (Max.) 7278 8003 8730

Chassis Weights [kg]


Front Axles 6345 6315 6290
Rear Bogie 2580 2670 2735
Kerb Weight 8925 8985 9025
Payload (including body, driver, fuel, etc.) 18575 18515 18475

Turning Diameter [mm]


Turning Circle Diameter Kerb to Kerb 19000 20600 22200
Turning Circle Diameter Wall to Wall 20500 22100 23700

Plated Weights [kg] Plated Design


Gross Vehicle Weight 27500 37000
Gross Combination Weight 42500 44000
Front Axles 11000 16000
Rear Bogie 16500 21000

Important Notes
Chassis Dimensions
Chassis weight includes oil, water, AdBlue, 0 litres fuel and without
Cab Height: +374 mm for CAB-HSLP, -204 mm for CAB-LDAY, -204 mm for
driver. Kerb weight can vary ± 3%.
CAB-LSLP, +4 mm for CAB-SLP.
Front Axle to Back of Cab: +424 mm for CAB-HSLP and CAB-SLP, -69 mm for Turning diameters are theoretically calculated.
CAB-LDAY, +418 mm for CAB-LSLP.
D-measure includes a front clearance of 50 mm and for rigid trucks also a Legal weights can differ from country to country.
subframe of 100 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension. For more detailed weight information, including optional equipment weights,
All dimensions are for unladen chassis and any tag axles down. Chassis height ask your Volvo sales contact to enter your specification into the Volvo Weight
used: CHH-HIGH. Information system (WIS).
Rear overhang used for vehicle weight calculation is the maximum rear
overhang (N Max.) for selected wheelbase.
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Height change when chassis height CHH-MED,FRAME300: 0 mm.
Instructions and chassis assembly drawing FMX84RF3A.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres: 315/80R22.5
Drive Axle Tyres: 315/80R22.5

1 (4)
Ref: FMX 84RF 3A 16 AUS 2020-11-23 ENGAU
New FMx13 8x4 Rigid Air Suspension FMX 84RF 3A
Core components ■ MSWI-C Isolation toggle switch LHS of chassis
■ CHH-HIGH Chassis height (high) approx 1025-1050mm (depending on □ MSWI-R Isolation switch on key fob (press door lock twice to isolate)
tyre selection)
□ CHH-XHIG Chassis height (extra high) approx 1100-1162mm (depending ■ R415A66 RHS 415 litre alloy fuel tank w/o step
on tyre selection) Min volume 415l
Max volume 415l
□ RADD-G2 Rear air suspension-high clearance
■ RADD-GR Rear air suspension ■ ADB032 AdBlue tank 32 litres

■ FMX-DAY5 Day cab ■ FCAP-L Fuel tank cap with lock


□ FMX-HSL5 Globetrotter cab ■ ESH-RIGH Muffler horizontal, right exhaust outlet
□ FMX-SLP5 Sleeper cab □ ESH-VERT Muffler horizontal, vertical exhaust outlet on right hand side
■ EU5SCR-M Eu5 SCR Selective Catalytic Reduction ( mandatory ) □ EXST-SSP Stainless steel exhaust stack
■ D13C460 Engine, 13C litre, 460hp, 2300nm □ TRBR-HCR Hand controlled trailer brake, reduced pressure
□ D13C500 Engine, 13C litre, 500hp, 2500nm □ TRBR-STA Stationary trailer brake control
□ D13C540 Engine, 13C litre, 540hp, 2600nm
□ TRB-STRE Automatic trailer brake activation (stretch brake)
■ EBR-VEB+ Volvo Engine Brake + (VEB+)
□ ATANK-AL Aluminium airtanks
■ AT2612F Volvo I-shift-12 speed automatic transmission (2600nm)
□ PT2606 Powertronic 6 speed transmission ( 2600nm ) ■ TL-LED LED tail lights
□ ASO-C Crawler gears Rims and Tyres
□ ASO-ULC Ultra low crawler gears
□ RT-AL 10 stud alloy disc rims (with long wheel studs)
□ RTH2610B Volvo RTH2610B hub reduction rear axles □ RT-ALDP 10 stud dura-bright alloy disc rims (with long wheel studs)
4 planet gears per hub □ RT-ALDPD 10 stud dura-bright alloy disc rims (with short wheel studs)
Axle rating: 26,000 kg □ RT-ALDU 10 stud alloy disc rims (with short wheel studs)
115 tonne train weight □ RT-ALP 10 stud polished alloy disc rims (with long wheel studs)
(Application approved) □ RT-ALPDU 10 stud polished alloy disc rims (with short wheel studs)
□ RTS2310A Single reduction tandem 23t GCW100t ■ RT-STEEL 10 stud steel disc rims
■ RTS2370B Single reduction tandem 23t GCW70t
□ SPWT-D Spare rim & tyre equal to drive
Packages □ SPWT-F Spare rim & tyre equal to steer
■ INFODF Information Platform with Dynafleet Support □ SWCP-T2 Transport mounted spare wheel
□ INFOMED Information Platform-Medium
□ INFONDF Information Platform with Navigation & Dynafleet Support □ JACK-12T 12 tonne capacity jack with brace
□ JACK-15T 15 tonne capacity jack and brace
Chassis ■ TOOL-BAS Basic tools
■ FST-PAR Parabolic leaf spring front suspension □ TOOLKIT Tool kit complete
□ FST-PAR3 3 leaf parabolic front springs (stiffer than normal)
□ INFLAHOS Tyre inflation hose (20 metres)
■ FAL13.0 Front axle rating: 13,000 kg
□ FAL16.0 Front axle load 16 tonnes Powertrain equipment
□ FAL20.0 Front axle load 20 tonnes (Non Load Share Susp.) ■ TRAP-HD Heavy Duty Transmission Internals
■ LDFA Load sharing front suspension ■ DRM-BE Drive Mode - Balanced Economy
□ DRM-E Drive Mode - Economy
■ FSTAB Front stabilizer, normal stiffness
□ FSTAB2 Front stabiliser bar increased stiffness □ PVT-EXT Topography Information... by GPS positioning & central
□ FSTAB3 Heavy duty front stabiliser bar storage data
■ RAL21 Rear suspension load rating: 21,000 kg □ CRUIS-E Extended cruise control (additional fuel saving functions)
□ RAL26 Rear suspension load rating: 26,000 kg ■ CRUISEC Cruise control
□ RSTAB1 Rear stabiliser bar □ AMSO-AUT Manual gear shift in automatic mode.
■ RSTAB3 Heavy duty rear stabiliser bar
□ AVO-ENH AMT Vocational option - enhanced
■ EBS-MED Electronic Brake System (EBS) contains
ABS, Traction control, Hill start aid □ APF-ENH Enhanced I-shift PTO functions
Diff lock control, Brake assist
□ CD43-O Dual plate clutch 430 mm diameter
Wheel brake monitoring, EBS status
■ CS43B-O Volvo 430mm single plate clutch
□ AUXPARK Auxiliary parking brake □ TC-HWO Transmission Oil Cooler
□ TRCO-12V 24v to 12v trailer lighting voltage converter ■ TC-MAOH2 High performance transmission cooler

□ TABS-12 24v to 12v trailer ABS voltage converter ■ 2COM1080 High volume air compressor

■ FST8080 Frame section thickness 8mm ■ AIRIN-HI High air intake, roofline position
□ AIRIN-LO Low air intake, rear of cab position
□ FIL-EEEF Liner (inner) from end of engine to end of frame
□ FIL-FBEB Liner (inner) - front of bogie to end of bogie ■ ACL1ST-S Air cleaner with two stage filter element
□ FIL-FBEF Liner (inner)- front of bogie to end of frame
■ 24AL120B High capacity alternator, 120 Ampere.
□ FIL-TXEB Liner (inner) - trans x-mem to end of bogie
□ 24AL150B Alternator - 150 Amp
□ FIL-TXEF Liner (inner) - trans x-mem to end of frame
□ PTER-100 PTO engine rear mounted with flange DIN100/ISO7646
■ BBOX-L Battery box mounted on LHS chassis rail
□ PTER-DIN Power Take Off / splined shaft groove (female) DIN5462.
■ 2BATT225 2x225 Ah batteries □ PTER1400 Rear engine mounted power-take-off with flange SAE 1410

□ BATTAMP Battery amperage indicator (in the DID) □ HPE-F101 F1-101 Hydraulic pump rear engine mounted

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

2 (4)
Ref: FMX 84RF 3A 16 AUS 2020-11-23 ENGAU
New FMx13 8x4 Rigid Air Suspension FMX 84RF 3A
□ HPE-F41 F1-41 Hydraulic pump rear engine mounted ■ ARMRE-DB Armrests both sides - driver's seat
□ HPE-F51 F1-51 Hydraulic pump rear engine mounted
□ HPE-F61 F1-61 Hydraulic pump rear engine mounted ■ ARU-BAS Seat armrest upholstery - basic
□ HPE-F81 F1-81 Hydraulic pump rear engine mounted ■ GRABHI-B Instep grab handle - standard
□ HPE-T53 F2-53/53 twin flow hyd pump rear engine mounted
□ HPE-T70 F2-70/53 twin flow hyd pump rear engine mounted ■ FMAT-RUB Floor mats - rubber
□ HPE-V45 V1-45 variable pump rear engine mounted □ FMAT-TX2 Floor mats - textile & rubber
□ HPE-V75 V1-75 variable pump rear engine mounted
□ LBK70 Lower bunk 700mm wide
□ PTPT-D PTO DIN / Powertronic
□ MATL-FI Mattress lower bunk - firm
□ PTPT-F PTO flange conn / Powertronic
□ MATL-SF Mattress lower bunk - semi firm
□ PTR-D Low speed PTO with DIN connection
□ PTR-DH High speed PTO with DIN connection □ OLMAT-BA Mattress overlay - basic
□ PTR-DM Medium speed PTO with DIN connection
□ PTR-F Rear PTO trans.flange 100% speed □ SAFE Safe box at bed-end
□ PTRD-D PTO with 2 DIN connections rear + 1 DIN connection front □ ETSB-F Engine tunnel storage box
□ PTRD-F PTO with 1 DIN + 1 flange connection rear □ ETSB-FR Engine tunnel storage box & rear cab wall
□ HPG-F101 F1-101 hydraulic pump gearbox mounted □ ETSB-R Rear cab wall storage
□ HPG-F41 F1-41 hydraulic pump gearbox mounted □ RUS-HIG Rear upper cab storage - 245 litres, 440mm
□ HPG-F61 F1-61 hydraulic pump gearbox mounted
□ HPG-F81 F1-81 hydraulic pump gearbox mounted □ REF-ICPK Refrigerator prep kit (on engine tunnel)
□ ACCLF-D Acceleration Limiting Feature - disabled □ MICRO-PK Preparation kit for microwave
□ ACCLF-E Acceleration Limiting Feature - enabled always
□ ACCLF-S Acceleration Limiting Feature - selectable □ BOTH-D Bottle holder in driving area

■ ESP-BAS1 ESP package (tractor/trailer combinations with ABS. Rigids ■ INLI-BAS Interior night lights
with standard COG) □ INLI-NL Interior white and red (night) light
□ INLI-NLD Interior light including night light and dimmer function
■ HWSS-ACB ACC & forward collision warning & emergency braking.
□ ARL-FLEX Flexible reading lamp (snake light)
■ LSS-DW With lane departure system
□ RH-ER Roof hatch-electric (metal emergency exit)
■ LCS Lane change support ■ RH-MTR Roof hatch-manual (tinted glass & rear opening)
■ DAS-W Driver alert support warning □ SWIND-PS Cab passenger side aux. window
□ RSENS-W Rain sensor to activate wipers ■ AWIND-RF Cab rear window- fitted
□ CU-ECC Climate controlled air conditioning □ VANMIR Vanity mirror
■ CU-MCC Manual controlled air conditioning
□ AS-FUS Auxiliary shelf, front upper storage
□ IMMOBIL Engine immobiliser
□ INFOT-PK LCD screen mount - 6kgs max
□ ALARM-B Anti-theft alarm (cab)
Cab exterior
□ BUPMON Back-up camera
■ EXTL-BAS Standard exterior trim level
■ WLIFT-AD Electric windows
■ DGLAS-H Hardened door glass
□ WLIFT-EB Electric windows
□ DGLAS-L Laminated door glass
■ ISUNS-DS Interior side sunvisor - driver's door
■ LOCK-CTL Central door locking-Key
□ ISUNF-B Interior front sunvisor - standard □ LOCK-REM Central door locking with remote control
□ ISUNF-MD Interior front sunvisor - with mirror (driver's side)
□ AUXFS Auxiliary folding side step
□ ISUNF-RE Interior sunvisor - front (electric)
■ ISUNF-RM Interior sunvisor - front (manual) □ GUARD-EH Guard plate for cooling pipes and oil sump
□ ADFS 2 din slots in front shelf ■ BUGNET Insect net in front of radiator
■ BUPALARM Reverse alarm ■ CTILTP-E Electrical cab tilt pump
□ LOADIND Load indicator, electronic controlled suspension (SUSPL-EC) □ FCABS-A Front cab suspension-air bellows
■ FCABS-M Front cab suspension-mechanical spring
□ REMC-MF Multifunction wireless remote control
□ RCABS-A Rear cab suspension-air bellows
■ FIREX25A Fire extinguisher 2.5 kg
■ RCABS-M Rear cab suspension-mechanical spring
■ WRITEPAD Storable steering wheel fit clip board
■ MIRCOMFX Electrically heated & operated convex glass mirrors
■ DST-CF5 Fully adjustable driver's comfort seat □ MIRFLACP Electrically heated & operated flat glass mirrors with front
Air suspension, heated, integrated safety belt monitoring camera on passenger side.
□ SBD-RED Red safety belts, pass. & driver seats □ AMIR-F20 Close view mirror

■ SBPRE-DS Drivers seat belt pretensioner ■ SUNV-H Exterior sunvisor

■ PST-BAS1 Basic passenger's seat □ AD-ROOF Aero-dynamic roof mounted deflector


□ PST-BENC Passenger bench seat
□ AD-SIDES Aero-dynamic cab side deflectors
□ PST-CF5 Fully adjustable passenger comfort seat
Air suspension, heated, safety belt □ GUARD-W Windscreen stoneguard
□ SBPRE-PS Passenger seatbelt pretensioner ■ HL-BASIC Standard head lamps
□ ARM-DBPS Armrests driver's both sides - passenger side single □ HL-CLEAN Head lamp cleaning system
□ ARMRE-BB Armrests both sides - driver's & passenger's seat

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

3 (4)
Ref: FMX 84RF 3A 16 AUS 2020-11-23 ENGAU
New FMx13 8x4 Rigid Air Suspension FMX 84RF 3A
■ HLP-ST Headlamp protection-steel
□ HLP-ST2 Headlamp protection-steel/wire mesh (non ADR compliant)
□ HL-ADJ Headlight adjustment - manual
■ DRL-LED V-shaped LED daytime running light
■ IDLAMP-A Identification lamps-amber
□ BEACON-P Beacon light wire preparation
□ SPOTP-F Aux spotlamp preparation, 280W maximum
□ ANT-CBR Antenna for CB radio, single antenna

Superstructure
□ SRWL-2RW 2 white rear chassis mounted working lamps
□ SRWL-PK Wiring prep for chassis mounted reverse/working lamps-3
position switch
□ SWL-2FW 2 white side working lamps (forward facing)
□ SWL-2RW 2 white side working lamps (rearward facing)
□ SWL-4W 4 white side working lamps
□ SWL-PK Wiring prep for chassis-mounted working lamps-2 position
switch
□ WL-CHPK Chassis mounted working lamp prep kit
□ WLC-H2W 2 x H3/70W high mounted work lamps with white lens.
□ WLC-PKH Prep kit for high mounted work lamps.
■ ECBB-HIG Body builder module - cab module
■ BBCHAS3 Body builder chassis electrical interface, 3 x 7 pin connectors
□ BEPR-T2 Body Builder electrical prep. for tipper with remote control
■ AESW2 2 flexible switches (AUX1 and AUX2).
□ AESW2PK 2 flexible switches (AUX1 & AUX2) + additional 4 flexible
switches
■ AUXSW-4 4 extra bi-stable switches wired to BBM

Delivery services
■ TGW-4GWL Telematics Gateway with 4G/LTE & WLAN
□ FMS-PK Fleet management system gateway
□ DRUT2 "My Truck" smartphone app. 2 year prepaid

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS). Volvo Truck Corporation
volvotrucks.com
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

4 (4)
Ref: FMX 84RF 3A 16 AUS 2020-11-23 ENGAU

You might also like