Digimatfe 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Digimat-FE

End-to-end material engineering tool using


Finite Element (FE) based micromechanics

...Powerful
Digimat-FE is a complete tool for the end-to-end investigation of composites based on finite element
homogenization. It addresses a very wide range of materials and physics, from woven composites to short
fiber reinforced plastics, from non-linear mechanical analysis to electrical conductivity and percolation analysis.

Relying on finite elements, it provides a very detailed insight into the influence of the microstructure on the
mechanical, thermal and electrical properties of a composite.

KEY BENEFITS

Accurate & efficient analysis of


complex material systems

End-to-End (geometry>mesh>solver)
robust solution with build-in nonlinear
FE solver.

Easy-to-Use interface for FE experts


and non-experts

Digimat is relied upon by major Material Suppliers, Tier1 and OEMs Worlwide.

VISIT US AT www.e-xstream.com
HOW DOES IT WORK?
4 steps to investigate a composite material:

• Define composite microstructure & constituents material properties


• Generate a geometrical model of the composite microstructure (Representative Volume Element - RVE)
• Generate a ready-to-run finite element analysis, using the embedded mesher (conforming or voxel mesh)
or external mesher
• Launch, monitor & post-process the FE analysis using the embedded FE solver (or start the finite element
analysis from the external solver) and post processing tools

Supported Types of Composites:


• Short fiber reinforced plastics
• Long fiber Reinforced Plastics
• Discountinuous Fiber Composites (e.g. HexMC(r))
• Unidirectional composites
• Woven & braided multiphase materials
• Hard metals
• Foams
• Filled rubber

Supported Physics:
• (Thermo)-Mechanical, linear and non-linear stiffness analysis including decohesion
• Thermal conductivity analysis
• Electrical conductivity analysis including clustering effect and percolation analysis

Interfaces to External Solvers:


• Marc
• Abaqus/Standard
• Ansys

Get access to a powerful end-to-end tool for your in-depth RVE analysis!

CONTACT US TO GET YOUR DEMO LICENSE TODAY!


Email: mira.toth@e-xstream.com
Tel: +352 2617 6607 / ext.21
Web: www.e-Xstream.com/product/digimat-fe

7th Digimat Users’ Meeting!


Rome, Italy l 21 – 23 October, 2014
More info & registration: www.e-Xstream.com VISIT US AT www.e-xstream.com

You might also like