Scribd
Upload
176 views

Polymers: Lecture 5 (Conducting Polymers) Unit-2a

Polymers are typically insulators, but some can conduct electricity. These are called conducting polymers. There are two types - intrinsically conducting polymers which have conjugated double or triple bonds allowing electron delocalization over the backbone, forming bands; and extrinsically conducting polymers which are filled with conductive elements or blended with other conducting polymers. Important intrinsically conducting polymers include polyacetylene, polyaniline, and polypyrrole. Doping these polymers with oxidizing or reducing agents increases conductivity up to 105 S/cm by creating positive or negative charges on the backbone. Conducting polymers have applications in batteries, sensors, drug delivery, filters, solar cells, and electronics.

Uploaded by

Utkarsh Singh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
176 views

Polymers: Lecture 5 (Conducting Polymers) Unit-2a

Polymers are typically insulators, but some can conduct electricity. These are called conducting polymers. There are two types - intrinsically conducting polymers which have conjugated double or triple bonds allowing electron delocalization over the backbone, forming bands; and extrinsically conducting polymers which are filled with conductive elements or blended with other conducting polymers. Important intrinsically conducting polymers include polyacetylene, polyaniline, and polypyrrole. Doping these polymers with oxidizing or reducing agents increases conductivity up to 105 S/cm by creating positive or negative charges on the backbone. Conducting polymers have applications in batteries, sensors, drug delivery, filters, solar cells, and electronics.

Uploaded by

Utkarsh Singh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Polymers: Lecture 5 (Conducting Polymers)

Unit-2a

Conducting Polymers
Polymers are organic macromolecules, a long carbonic chain, composed by structural repeat
entities, called monomer. The majority of polymers are insulators, due to an unavailability of
free electrons to create conductivity. The poor conductivity of polymers is explained by the
band theory. Band theory explains the existence of valence and conduction band. While
valence band are continuous energy levels placing the valence electrons; conduction band are
continuous higher energy levels that are empty. The band gap determines the conducting
nature of materials. The Fig below shows the band structure of monovalent metallic
conductors (a), for divalent metallic conductors (b) for insulators (c) and for semiconductors
(d).

Band Structure for Conductors, Semiconductors, and Insulators: a) for monovalent metals;
b) divalent metal; c) Insulators; and d) Semiconductors

Polymers were considered as insulators. But in 1970, the first intrinsic conductive polymer
was discovered by Shirakawa, Heeger, and MacDiarmid, for which they were awarded the
Nobel prize in 2000. The polymer was produced by the exposure of the polyacetylene to
dopant compounds: oxidizing or reducing agents; electron-donor or electron-receptor of
electrons.
Conductive Polymers

Polymers which conduct electricity are known as conducting polymers. Conducting polymers
are classified as Intrinsically and Extrinsically Conducting polymers

Intrinsically Conducting polymers have inherent double or triple bonds in conjugation.


Extensive delocalization of π electrons over the entire polymeric backbone results in the
formation of valence and conduction bands. Significant band gap exists in such polymers.
Such polymers exhibit semiconducting properties. Electrical conductivity in such polymers
results only after appropriate thermal or photolytic activation. The electrons in valence band
get sufficient energy to jump the gap and reach the lower energy level of the conduction
band. Examples are polyacetylene, Polyaniline and polypyrrole

Compiled by Dr Arunima Nayak and Dr Brij Bhushan Page 1


Polymers: Lecture 5 (Conducting Polymers)
Unit-2a
Structure of a polyacetylene

Structure of Polyaniline

Structure of polypyrrole

Doping i.e addition of external agent into the conjugated polymer can lead to a dramatic
increase in electrical conductivity to values as high as 105 S/cm (Cu has an electrical
conductivity of 106 S/cm). In the presence of a dopant, positive or negative charges are
created on the polymer backbone as a result of oxidation or reduction. Doping is of two
types: p type and n type

In p type, conducting polymers are exposed to Lewis acid. Oxidation occurs and positive
charges are developed on polymer backbone.

In n type, Lewis base causes reduction to occur and negative charges are developed on
polymer chain.

The movement of such charges as a result of resonance in the presence of an externally


applied field give rise to enhanced conductivity.

Resonance in polyacetylene in the presence of Lewis acid

Compiled by Dr Arunima Nayak and Dr Brij Bhushan Page 2


Polymers: Lecture 5 (Conducting Polymers)
Unit-2a

Resonance in Polyaniline in the presence of Lewis base

Disadvantage of such Intrinsically Conducting Polymers is low conductivities,


improcessabilities, poor mechanical strength and poor stability.

Extrinsically Conducting Polymers are of two types:

a. Conductive element filled polymer: Conducting elements like carbon black, metallic
fibers, metallic oxides etc. are filled into the polymer to form a solid entity
Such polymers are low in cost, possess high conductivity, light in weight,
mechanically durable, strong and are easily processable in different forms, shapes and
sizes. Disadvantages include reduction in tensile strength
b. Blended conducting polymer: a conventional polymer that is insulator is blended with
a conducting polymer. Such polymers possess better physical, chemical, electrical and
mechanical properties and can easily be processed.

Application

Conducting polymers are widely used

1. In rechargeable batteries.
2. In making analytical sensors for pH, O2 , SO2 , NH3 , glucose, etc.
3. In the preparation of ion exchangers.
4. In controlled release of drugs.
5. In optical filters.
6. In photo voltaic devices.
7. In telecommunication systems.
8. In micro-electronic devices.
9. In bio-medical applications.

Compiled by Dr Arunima Nayak and Dr Brij Bhushan Page 3

You might also like