WOMA® ULTRA-HIGH-PRESSURE UNITS

Powerful and reliable: mobile and stationary high-pressure units for applications
up to 3,000 bar.
WATER AS A TOOL
WOMA is one of the leading manufacturers of high-pressure pumps, high-pressure units and accessories for cleaning
and removal in industrial applications. For more than 50 years WOMA has been supplying high-pressure technology
to customers all over the world. Through consequent research and development, we have today mastered systems
with water pressure of up to 4,000 bar. As part of the Kärcher Group, through the international distributor and ser-
vice network of the market leader in cleaning technology we are able to reach a growing international target market.

The revolutionary idea of using the mechanical effects of flowing water for cleaning with enormous pressures is the
driving force of WOMA since its foundation in 1962.

2
Content
EcoTherm EcoMaster Classic
Effective cleaning with hot water. Page 4 Simply to use, simply robust, simply efficient. Page 12

EcoMaster MK3 Individual Systems

The mobile power pack. Page 6 According to your wishes and requirements. Page 14

EcoMaster Large Unit-Series Unit Controllers

Powerful systems for high requirements. Page 8 Clear and intuitive. Page 16

EcoMaster ZWG Telematics Solution
Powerful, versatile and efficient in Page 10 Worldwide availability with maximum Page 18
every situation. data security.

3
 AVAILABLE
FOR RENT!

ECOTHERM
Effective cleaning with hot water.
The hot water cleaner EcoTherm reaches performance levels, which otherwise
are only achieved by bigger high-pressure units. Cleaning with hot water is
often more effective than with cold water. This means that lower pressures are
sufficient for comparable cleaning tasks.

4
 ECOTHERM

Advantages at a glance:
■ The extremely reliable and durable high-pressure pump 70Y is
characterised by its compact design and low weight.

■ Economical and robust diesel engine (38 kW).

1 Graffiti and layers of paint can be

■ The unit and the heater are operated via a common, modern and easily removed from walls and faca-
intuitive control. des with hot water.

(For detailed information on our device controls, see page 16 onwards). 2 Soiled floors and surfaces can be
cleaned by using the EcoTherm.

■ The compact and weight-optimized single-axle trailer is appro- 3

Working with hot water can be car-
ried out faster, more thoroughly and
ved as a trailer up to 80 km/h and can be brought to site with more economically.
almost any middle-class car.
1

■ With up to 95 °C facades, small pipes, industrial flooring and

other surfaces can be easily cleaned, oil and grease can be
washed away and coating can be removed.

■ The tank system with five chambers including a safety trough

prevents the leakage of fluids such as fuel, oil or softeners.

■ Automatic shutdown of the heating elements when there is no

water supply increases safety and saves energy costs.

■ Maximum safety for the user: The system is pressure free as

long as the high-pressure gun is not activated.
2

■ Integrated frost protection technology.

Technical Data EcoTherm

Unit type ET 600 ET 800
Max. pressure bar 600 800
3
Max. volume flow in l/min 28 21
Max. water temperature in °C 95
Heating oil tank in l 100
Fuel tank in l 100
Water tank in l 200
Weight incl. operating material in kg 1,700
Measures in mm (L x W x H) 4,100 × 1,900 × 1,960

5
 AVAILABLE
FOR RENT!

ECOMASTER MK3
The mobile power pack.
The EcoMaster MK3 is a compact, high-performance unit for the maintenance of
large structures and industrial plants, but also for many other applications in the
industry, in the maritime sector, in the construction industry as well as in munici-
pal services. The ultra-high-pressure water jet unit is designed as a mobile trailer
with an economic diesel engine.

6
 ECOMASTER MK3

Advantages at a glance:
■ The heart of the EcoMaster MK3 are the powerful ■ Ideal for the removal of coating and concrete refur-
and reliable ultra-high-pressure pumps of the bishment, as well as for the separation and cutting
M-Series, Type 190M and Type 250M. of various materials.

■ Available in three versions with operating pressures ■ Maximum safety for the user: The system is pressure-
of 2,500 bar, 2,800 bar and 3,000 bar. less as long as the high-pressure gun is not activated.

■ Modern, intuitive control. ■ Low noise operation due to a noise protection hood
(For detailed information on our device controls, see page 16 made from aluminium (<85 dB(A)).
onwards).
■ Road approval as trailer up to 80 km/h.
■ Available in the engine classes stage 3a, 4 and 5
with the latest emission standard.

Technical Data EcoMaster MK3

Unit type 190M 250M 190M 250M 190M 250M
Max. pressure in bar 2,500 2,800 3,000
Max. volume flow in l/min 26 32 20 25 18 21
Stage 3a / 4 weight incl. operating fluids in kg 2,750 / 2,825 2,750 / 2,825 2,750 / 2,825
Measures in mm (L x W x H) ≈ 4,450 × 2,030 × 2,190 ≈ 4,450 × 2,030 × 2,190 ≈ 4,450 × 2,030 × 2,190
Stage 5 weight incl. operating fluids in kg 2,915 2,915 2,915
Measures in mm (L x W x H) ≈ 4,450 × 2,030 × 2,320 ≈ 4,450 × 2,030 × 2,320 ≈ 4,450 × 2,030 × 2,320

1
With the WOMA high-pressure guns and
operating pressures of up to 3,000 bar,
even selective concrete removal is pos-
sible.

2
In combination with the WOMA TD3000
SCS, the EcoMaster MK3 is ideally suited
for the uncovering of steel reinforce-
ments and reinforcing bars.

Whether manually using the hand lance

3 4
or the Magnet Lizard, even multi-layer
paints and antifouling coatings are no
challenge.

1 2 3

7
ECOMASTER LARGE UNIT-SERIES
Powerful systems for high requirements.
With the highest level of reliability and an equally large range of services, WOMA
combustion- and large electrical units are suitable for the most demanding tasks
and applications.

8
 ECOMASTER LARGE UNIT-SERIES

WOMA large units are characterized by their flexibility and robust-

ness. The modular design allows a fast and flexible use for all tasks
in mobile and stationary high-pressure water applications.

The following unit versions are available:

Modell Classic:
the basic unit, robust and easy to use
Designed for the operation with a Dump Gun or with a manual
overflow valve for mechanic water tools.

Modell Advanced:
the control with that certain extra
Fitted with a pneumatic overflow valve. Suitable for the operation
of electronic water tools and offering the highest level of safety.

Modell Expert:
the expert solution for the highest demands
Equipped with pneumatic overflow valve and automatic pressure-
rpm regulation. Suitable for the operation of electronic water tools.
Optional multi-user solutions can be integrated.

Additional and freely selectable options for all versions:

■ Container housing
■ Sound insulation
■ EXI control

9
6 PT_RUNNING TITLE

AVAILABLE
FOR RENT!

NOW FULLY AUTOMATED

ECOMASTER ZWG
Powerful, versatile and efficient in every situation.
The EcoMaster ZWG is controlled by an integrated intermediate gearbox in a
power range from 50 to 500 kW. It covers the full range of high-pressure appli-
cations in the industry while optimizing fuel consumption during the operation.

10
 ECOMASTER ZWG

Advantages at a glance:
■ Reduction of fuel consumption and reduction of C02 emissions with the
right engine speed for the application.

■ The power range from 50 to 500 kW can be regulated via the integrated,
multi-stage intermediate gear.

■ With six available gears, the user always has the optimal pressure-liter
combination at his disposal. 2

■ Capacity and fuel consumption are constantly readable, with full control
over the operating costs occurred.

■ In automatic mode, gear changes take place during operation and without
significant changes in the recoil forces.

■ With the additional available overdrive, the engine is in the optimal con-
sumption range with maximum output at the same time. This provides the
3
full liter capacity of the machine at comparably low fuel consumption.

■ Due to the speed reduction, the noise emission is significantly reduced.

■ One device for changing applications:

High-pressure gun work between 27 and 34 l/min
Pipe cleaning applications between 84 and 183 l/min
Tank cleaning applications from 112 to 264 l/min

Technical Data
Unit type 550Z 700Z
Max. pressure in bar 850 – 1,500 750 – 1,500
Volume flow in l/min 25 – 259 27 – 264

Equipped for the diverse industrial cleaning

routine.
A selection of the numerous application pos-
sibilities of the EcoMaster ZWG series:

1 Heat exchanger cleaning

Flow rate in l/min Fuel consumption in l/h
5 300 150
2 3 Manual and automated parts cleaning
280 700 PS 140
6. Overdrive 264
260 262 130
240 5. 120 4 Tank cleaning
220 550 PS 113 110
219
200 5. 100
180 183 90
4. 83
160 400 PS 160 79 80
140 6. Overdrive 4. 70
325 PS 3. 137 67 69
120 3. 60
112
100 250 PS 49 50
84 43
80 2. 75 40
38 2.
60 150 PS 31 30
46 23 1.
40 100 PS 20 20
70 PS 27
1. 34
5
Volume flow and fuel consumption
20 10
Depending on the shifted gear at
0 0
1100 1200 1300 1400 1500 1600 1700 1800 1100 1200 1320 1400 1500 1600 1700 1800 1,000 bar using the example of WOMA
Speed diesel engine in 1/min 1. - 6. Selected Gear Max. pressure Overdrive EcoMaster D 700Z ZWG

11
ECOMASTER CLASSIC
Simply to use, simply robust, simply efficient.
The EcoMaster Classic are designed for the usage in rough conditions. They per-
suade with their compact, robust and low-maintenance construction and simple
operation. This makes the high-pressure units versatile and flexible, even in
extreme climatic regions or under difficult environmental conditions.

12
 ECOMASTER CLASSIC

Advantages at a glance:
■ All devices are fitted with robust, low maintenance and strong
performance WOMA high-pressure pumps.

■ The compact design with stable frame construction or crash

frames enables easy usage in difficult areas.

■ Equipped with crane hooks for easy transport, the WOMA Eco-
Master Classic is also optionally available as a trailer construction.

■ The EcoMaster Classic aggregates are particularly suitable for

heavy soiling and caking in the industry, as e.g. commonly found
in heat exchangers, meshes, filters and pipes. 2

■ The EcoMaster Classic offers the optimal equipment for the

refurbishment and removal of concrete or coating, as well as for
cleaning.

■ The large supply tank also ensures a calm water cycle in areas
with limited supply of fresh water.

■ Low operational costs due to high service life, minimal mainte-

nance costs and simple servicing.

1
The EcoMaster D 250M Classic, with an ope-
rational pressure of up to 3,000 bar, offers
the necessary performance for the removal
of concrete and coating.

2 The EcoMaster D 150Z Classic is ideal for

cleaning the exterior of tanks and removing
coatings.

3 With a volume flow of up to 72 l/min, the

EcoMaster D 1502 Classic is the optimal sys-
tem for internal tank cleaning combined
with the WOMA TankMaster cleaning heads.

Technical Data
Unit type EcoMaster D EcoMaster D EcoMaster D EcoMaster D EcoMaster D EcoMaster D
250M Classic 250M Classic 190Z Classic 150Z Classic 1502 Classic 2502 Classic

Max. pressure in bar 2,800 3,000 1,500 1,500 750 750

Max. volume flow in l/min 25 21 50 36 68 94

Weight in kg 2,500 2,500 2,500 2,500 2,500 2,500

Measures in mm (L x W x H) 2,880 × 1,510 × 1,820 2,880 × 1,510 × 1,820 2,880 × 1,510 × 1,820

Unit type EcoMaster D 250 Z Classic EcoMaster D 2502 Classic

Max. pressure in bar 1,500 1,000 720 400

Max. volume flow in l/min 60 96 133 219

Weight in kg 3,425 3,425 3,425 3,425

Measures in mm (L x W x H) 3,200 × 1,720 × 2,200 3,200 × 1,720 × 2,200 3,200 × 1,720 × 2,200 3,200 × 1,720 × 2,200

13
INDIVIDUAL SYSTEMS
According to your wishes and requirements.
Besides the standard units, we design and produce individual high-pressure
water jet devices according to customer requirements. The configuration is
flexible depending on the requirements. Whether it is mobile or stationary,
with diesel engine or electric motor – our experts find the best solution even
for complex applications or challenging working conditions.

14
 INDIVIDUAL SYSTEMS

Advantages at a glance:
■ The system design is always modular and can be either stationary
as a Skid Unit respectively with container housing, or can be
mobile as a trailer, as a truck installation or even as a flat wagon.

■ All pressure stages and volume flows within the WOMA portfo-
lio are available – with up to 4,000 bar, and approximately
1,700 l/min.

■ Drive via powerful, efficient diesel engines or alternatively with

electric drive for stationary operation.

■ Multi-consumer valves enable pressure surge-free, safe working

with several consumers with one device.

■ Integration of the machine control into existing control systems

is possible without any problems.

■ With WOMA‘s unique Twin-Jet solution, two high-pressure pumps

can be operated independently from each other with one drive.
Thus, the system offers two workplaces with water tools in one
unit.

Examples of further options:

■ Container housing
■ Flat wagon or trailer solution
■ EXI control
■ Highly efficient pressure control by frequency converter
■ Different sizes of diesel and water tanks
■ Individual colour design
■ and many more...

Whether mobile or stationary unit, with or without

container housing: a flexible unit configuration can
be made according to your wishes and requirements.

15
UNIT CONTROLLERS
Clear and intuitive.
The intuitive WOMA unit controllers for mobile applications are available in two
versions with 4.3“ or 7” display. With integrated SPS and CAN master capability,
this is the perfect solution for high-pressure applications that require an innova-
tive control and visualization system.

16
 UNIT CONTROLLERS

Advantages at a glance:
■ Setting the desired operating parameters directly on ■ Decentralized I/O modules for the acquisition of sen-
the display. sor data and control of actuators.

■ Display of all relevant pump, motor and gearbox data ■ Controller integrated in the display, additional SPS is
directly on the display. not needed.

■ Display of incidents of the pump, the engine and the ■ Shock and vibration resistant, protection class IP66.
automatic transmission directly on the display.
■ 32 different languages ​​included.
■ Collection of all incidents and events in a log file.
■ Pre-equipped for the WOMA telematics-system.
■ USB interface for software updates and export of the
log file. ■ Expert devices optionally also adaptable for
multi-consumer operation.
■ Integrated RFID system with three authorization levels.

■ Operation via integrated buttons and a jog dial, for

easy handling with gloves.

Control variants and functions

Unit type Classic Advanced Expert
Pneumatic overflow valve or
Unloader valve - Manual overflow valve Pneumatic overflow valve
2/2W-Bypass valve
Manual pressure regulation via Automatic pressure-
Pressure regulation/-control Pressure regulation via nozzle Manual pressure regulation on OV
PN-Hand control speed-control
Automatic pressure-
Speed ​​control/-regulation Manual speed control
speed-control
4.3“ (5 – 8l units)
Display 4.3“
7“ (13 – 16l units)
Water tools Foot valve (DG) or Dump-Gun Water tools with valve Water tools with electrical switching contact
Automatic mode
Modes Dump-Gun-mode Manual mode Large consumer operation
Small consumer operation

17
6 PT_RUNNING TITLE

TELEMATICS SOLUTION
Worldwide availability with maximum data security.
With the WOMA telematics-system, machine data are always in view: at any
time, at any place. Full control with maximum data security. The WOMA telemat-
ics-system collects, transmits and evaluates the machine and operating data of
WOMA high-pressure equipment in detail.

18
 TELEMATICS SOLUTION

Via the secure WOMA Telematics DataPortal, users have an overview of all important data about machi-
nes and activities at any time and from any place via a dashboard. Planning and control with maximum
data security has never been easier.

Advantages at a glance:
■ Maximum data security, TPM security chip, TLS1.2 ■ API Interface of the DataPortal
encryption according to EU and US regulations ■ For temperature ranges from -40 °C to +80 °C
■ Multiband 4G LTE modem for worldwide use ■ Integrated eSIM card
■ Real time positioning via GPS ■ Made in Germany
■ Access to machine and operating data of your WOMA ■ Reduced downtimes through optimal maintenance
high-pressure unit preparation
■ Web-based fleet management
■ Remote diagnostics - also via WOMA Service

WOMA Telematics DataPortal

With WOMA‘s Telematics DataPortal all machines can be managed online and High-pressure pump:
the entire telemetry data can be visualized. From the transmitted data a mul- ■ Operating hours
titude of useful information is generated. With the help of the latest Big-Data ■ Actual pressure
technologies, detailed reports can be created. Whether current machine status (operating pressure)
or historical data history - all recorded data can be accessed at any time via ■ Water pressure
desktop PC, tablet or smartphone. ■ Filter differential pressure
■ Oil temperature
The collected data of the new WOMA telematics system provide all useful infor-
mation for a solid planning basis for operations, maintenance and investments - Transmission:
for more efficiency and success. ■ Current transmission gear

Engine:
■ Consumption values ■ Error memory and operating errors ■ Engine Operating hours
■ Creation of cleaning profiles ■ Investment planning ■ Engine speed
■ Cleaning efficiency ■ Predictive Maintenance ■ Engine load
■ Annual planning ■ Preventive Maintenance ■ Total fuel consumption
■ Service planning ■ Current fuel consumption

WOMA Telematics is available in these countries.

19
 03/2021-E · Copyright WOMA® · Printed in Germany · Changes and additions are reserved.

WHATEVER THE TASK —

WE HAVE THE SOLUTION.
WOMA GmbH
Werthauser Straße 77–79
47226 Duisburg
P: +49 2065 304 0
F: +49 2065 304 200
[email protected]
www.woma-group.com