Brazil Air-Cooled Series R (TM) RTAC Product Report

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Air-Cooled Series R(TM) - Brazil

Job Information

Job01

Unit Information Electrical Information

Tag BRTAC-1 Unit Voltage 380 V/60 Hz/3 Ph


Quantity 1 Incoming Power Line Connection Single point
Unit Nominal Tonnage 140 Compressor Motor Starter Type Wye-delta closed transition
Unit Type Standard
Efficiency/Performance Unit Power 154,30 kW
Capacity 327801,44 kcal/hr Total compressor Power 141,70 kW
Efficiency 2,47 COP (kW/kW)
COP 2,47 Each RLA - compressor A 142,00 A
Unit Shipping Weight 4877 kg LRA - compressor A 260,00 A
Length 4978 mm RLA - compressor B 142,00 A
Width 2260 mm LRA - compressor B 260,00 A
Height 2362 mm RLA - compressor C
A-weighted Sound Pressure 72 dBA LRA - compressor C
Ckt 1 Refrigerant Charge (HFC-134a) 75 kg
Ckt 2 Refrigerant Charge (HFC-134a) 75 kg Single Point Power MCA 348,00 A
Dual point power MCA - ckt1
Note: Sound pressure measured in accordance with ARI Standard 370-2001
Dual point power MCA - ckt2
at ARI operating conditions.
Single Point Power MOP 450,00 A
Dual point power MOP - ckt1
Evaporator Information
Dual point power MOP - ckt2

Evap Temp Range & Application Type Low temp below 4C (40F),with
frz prot
Evap leaving temp 1,0 C Condenser Information
Evap entering temp 9,1 C
Evap flow rate 11,61 L/s Ambient temp 35,0 C
Evap pressure drop 10,2 kPa Condenser Temp Range Standard Ambient
Evap fouling factor 0,017610 m2-deg C/kW Elevation 0,0 m
Evap fluid type Propylene Glycol Condenser Fin Material Aluminum Non-Slit Fins
Evap fluid concentration 15,00 %
Evap fluid freeze point -5,1 C Number of Condenser Fans 8,00 Each
Evaporator Passes 2,00 Each Fan Motor Power 11,60 kW

This unit complies with the efficiency requirements of ASHRAE Standard 90.1-1999

02/08/2021 Product Version 1.6

You might also like