APPLICATIONS OF TINKERCAD

What is TinkerCAD and what

is it used for?
Tinkercad is a free and easy-to-use application for 3D design, electronics, and coding.

From an idea to projects in minutes!

Autodesk's Tinkercad is one of the most popular classroom tools for creating simple designs from
scratch and for quickly modifying existing designs. It is a free online 3D design program that you
can use in your web browser without downloading any software. Tinkercad is extremely intuitive
and easy to use and has built-in Lessons to help you learn the ropes, making it perfect for beginners
both young and old.

No need to buy any physical components, sensors, Arduino boards or modules.

No destruction of any physical components if circuit is incorrect.
Make your presentation clean and professional.

Aim for this tutorial is:

Learn how to select, place and program components using Arduino. This tutorial will guide you by
making a motion detection and light detection door light.

PIR Sensor
Relay
Light Bulb
Arduino UNO

Battery
Light Dependent Resistor

1
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 TINKERCAD TUTORIAL

Create a Tinkercad Account

and Create a New Project

1.

1. Click join now and follow online instruction to create an account. Select Create a personal
account.

2
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 TINKERCAD TUTORIAL

Create New Circuit project

2.

2. 3D Design: Tinkercad is similar to a CAD software where you can design 3D models for 3d
printing. The CAD software is based on constructive solid geometry (CSG), which allows
users to create complex models by combining simpler objects together.

Circuits: This option helps create a virtual circuit, program it, and test it in real time.

Codeblocks: This new feature helps you create a block programming tree, where the 3D
models are formed step by step following the tree instructions.

Lessons: Tinkercad has feature where one can learn from lessons created by different users
online and can access later with this option.

Create project: This will create a directory where you can store all 3D models and circuit for
one specific project.

3
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 3.

3. Select the Circuits option and Create new Circuit.

6. 7.

4. 5.

4. This space is where we will place all the components. The components can be moved
around, edited, and wired together.
5. This section holds all the components. Scroll down to access component types.
6. Use this tab to rotate, delete, undo or redo. It also helps users to create and name labels for
components.
7. This option helps you program Arduino, use serial monitor, start real time simulation, export
code, and share your projects.

4
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
8. These are the components available in the basic option.

9.

9. To get access to more components select All option.

5
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
10. Tinkercad has many components and modules which can be used with Arduino UNO, some
of the examples are shown in image above.

6
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 TINKERCAD TUTORIAL

Building the Circuit

PIR Sensor Relay

Arduino UNO
Bulb

Battery

LDR 1k Resistor

11. Place all the components as image above by selecting them from the components section
on right side. Click on the component to select and click again anywhere on workspace to
place.

7
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 12.1.

12.

12. For changing the components value, select the component and change value at 12.1.

13.

13. Hover over the points of the module to know the output name and click it to start wiring the
components.
14. While wiring click to bend the wire as show in image above.

8
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 15.

15. Click on wire to select the wire colour. This helps in differentiating between wire use. For
example, 5v wire colour is Red and for GND(Ground) wire colour is Black.

16. Wire all the components as shown in the image above. Details of components and wiring is
as below.

9
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
Components and Wiring
PIR Sensor Product Name HC-SR501 Body Sensor
Module
Operating Voltage Range 5-20VDC
Quiescent Current <50uA
Level output High 3.3 V /Low 0V
Delay time 5-300S(adjustable)
Range (approximately
.3Sec -5Min)
Board Dimensions 32mm*24mm
Angle Sensor <110˚ Cone Angle
Operation Temp -15 to +70 degrees

Pin GND Arduino GND

Pin POW Arduino 5V
Pin Output Arduino D2
Relay Product Name KS23-M-DC5
Operating Voltage 5VDC
Coil Power 0.20W
Dimension 21 x 10 x 12mm
Max switch power and 48W 60VA
voltage 24Vdc 220Vac
Operating Temp -30 to 70 degrees

Pin 8 Arduino D4
Pin 1 Arduino GND
Pin 2 Battery +
Pin 4 Bulb Terminal 1
LDR Product Name NSL-19M51
Max AC or DC voltage 320V
Current 75mA
Operating Temp -60 to 75 degree
Cell Resistance 1000Lux 400Ω
10Lux 9KΩ
Dark Resistance 1 MΩ

Terminal 1 Arduino 5v
Terminal 2 Arduino A0
Resistor Product Name Carbon Film Fix Resistor
Value 1000Ω
Power 1/4W

Terminal 1 Arduino A0
Terminal 2 Arduino GND
Bulb 9V Bulb

Note: Any AC or DC Bulb or LED or load can Terminal 1 Relay Pin 4

be used with relay. Terminal 2 Battery GND
Battery (Power Source) 9v Battery

Note: Any suitable power source can be used Terminal + Relay pin 2
according to Bulb, LED, or load requirements. Terminal - Bulb Terminal 2

10
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 TINKERCAD TUTORIAL

Programming with Arduino

17.
18.

19.

17. Once wiring is complete, select the code option to start coding.
18. Use the Text option to write the code for this tutorial or use block coding.
19. This is where all code can be written. Copy and paste the code shown on next page.

11
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
Arduino Code

#define PIR 2 // Defining PIR Input pin

#define Relay 4 // Defining Relay Output pin
#define LDR A0 // Defining LDR Input pin

void setup()
{
pinMode(Relay,OUTPUT); // Initializing Relay Pin as Output
pinMode(PIR,INPUT); // Initializing PIR Pin as INPUT
pinMode(LDR,INPUT); // Initializing LDR Pin as Input
Serial.begin(9600); // Initializing Serial Monitor
}
void loop()
{
Serial.println(analogRead(LDR)); // print LDR raw value on serial monitor

if ((analogRead(LDR)) <= 500) // Condition if it is dark outside

{

if((digitalRead(PIR)) == HIGH) // Condition if we detect any movement on sensor

{
digitalWrite(Relay,HIGH); // Turn ON relay
delay(5000); // Keeps the light ON for 5sec

else // if it is bright outside follow this

{
digitalWrite(Relay,LOW); // Turn OFF relay
}
}

else
{
digitalWrite(Relay,LOW); // Turn OFF relay
}
}

12
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 20.

21.

20. Start the simulation after writing the code.

21. Click serial monitor to see the real time value of the LDR sensor output. This helps us know if its Day
or Night.

22.
Day Night

Slide the point on bar towards Day or Night, it detects the brightness intensity. The Raw values can be
seen on Serial Monitor. We have identified 500 as threshold in the code. Any value below 500 means it is
dark outside and any value above 500 means it is bright.

13
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836
 23.

24.

22. Click and drag the blue dot to create a physical movement in front of sensor.
23. If the sensor detects any movement it will turn red and the bulb will turn ON.

14
Brains Behind, No 12 old 13, Pachayappan Nagar, near Abirami Kalyan mandapam, Chromepet, Chennai, Tamil Nadu 44
Contact: 9003608836