Mitsubishi Industrial Sewing Machine AC Servo

Dimensions
Motor and Control Box 32
Position Detector XC-KE-01P
187 10 0.2 13
56 15 10 42
33 121 33 A
0
4N9 -0.030
13 +0.5
10 13
Mitsubishi Industrial Sewing Machine AC Servo
0
14.5 2-M6 screw 120°
6

1
102

28
3.5 +0.
36
66

46
40
8.5
11.2
M10 screw
A A-A

13

96
50
19 3 6.2

22.2 +0.073
+0.040
159 57 28.5

68
Tapered shaft

278.5 Lead wire

221 85.5 74 Length:0.3m 46
12

Pulley center
Lead wire
Length:0.95m
Pulley cover

120
Lever unit
104

Adaptor for position detector attachment

Screw-in type

251

22.2 +0.015
+0.036
181
35
20

21.3
2 8 2

14

16
284
330 107
White : SM11/32 threads 28 (Brother, Mitsubishi Series)
342 132
Yellow : SM5/16 threads 24 (Juki, Toyota, Singer Series)

Specifications
Power supply 100V to 120V 200V to 240V 200V to 240V
Motor model XL-G554-10(Y) XL-G554-20(Y) XL-G754-20(Y)
Control box model XC-GMFY-10-05 XC-GMFY(CE)-20-05 XC-GMFY-20-07
Rated output 550W 750W
Rated speed 3,600rpm
Rated torque 1.47N • m(0.15kg • m) 1.96N • m(0.2kg • m)
Speed control range 70rpm to 8,999rpm
Machine axis Shipping setting (250rpm to 4,000rpm)
Motor axis 50rpm to 3,600rpm
Detector XC-KE-01P
Ambient temperature 5°C to 40°C
Environment Ambient humidity 30%RH to 95%RH (no condensation)
Max. altitude above sea-level 1,000m
Motor : 6.9kg (net), 9.1kg (gross)
Mass
Control box : 3.5kg (net), 6.9kg (gross)
L : 490mm x W : 402mm x H : 227mm "Carton box"
Packaging style
(When motor and control box are packaged as set)

In order to properly and safely utilize the sewing machines mentioned in this brochure, before
Safety Caution starting the operation, please make sure to read the related instruction manuals.

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
http://www.mtco-web.co.jp/misin/index_e.htm

New publication, effective Aug. 2015.

1508 (MEE) Printed in Japan Specifications are subject to change without notice.
 LIMISERVO X G Series

New Mitsubishi LIMISERVO G Series! Options

Compact, lightweight motor with complete range of
XC-G10S (control box attachment type)
convenient functions! Control panel XC-G10L (Impossible to use it together)
XC-G500-Y
Motor Size and Weight Reduction Auto presser foot XC-FM-2: Electromagnetic type (24V)
lifter unit LE-FA: Air type (shared30V / 24Vuse)
Realization of Compact, Lightweight Motor Variable speed pedal XC-CVS-3: 3-speed pedal, standing machine
Lever unit XC-GL-1-SET: 1-step kick-back use (installation plate, extension cable set)
Motor size reduced by approximately 60% when compared with previous motor (XL-554). XC-FM-2 XC-CVS-3
Motor weight reduced by approximately 1.7kg. (separated type) XC-GL-2-SET: 2-step kick-back use (installation plate, extension cable set)
1.0m motor cable (200V) : M97318099
Extension cables 0.6m detector cable : K14M71324830
Enhanced Functionality 1.0m encoder cable : K14M71725402
Installation metal New motor and old control box: K14M72354001
Step Sequence Function fittings Old motor and new control box: K14M72354101
This function enables easy programming of the desired input, output and machining operations in sequence with the stitching LE-FA
process. (Extensive upgrade of existing machine simple sequence mode)
Various operations can now be incorporated into the "stitching process", including those performed before and after operation. XC-GL-2

When sensor input ON

When switch input OFF
External output signal ON Motor, Control Box Models Support for Each Machine
Motor speed adjusted to**rpm.

Output
Status
When timer Elapses by**sec.
Input

When stitch number **stitches

Thread trim operation performed Control Box Compatibility Settings Table for Adapted Machines
When thread trim Started Needle cooler output ON Power supply Adapted Machine XC-GMFY
Model Output Functions
When** Exceeds**rpm Start (end) backtacking cancelled Phase Voltage Lock stitching

Function/Model
When motor speed drops below**rpm Timer started etc. Full functionality including auto thread Overlock
XC-GMFY-10-05 550W Single-phase 100 to120V trimming,presser foot lifting, Chain stitching
(Note: Condition settings also possible with multiple combining.)
fixed-stitch stitching, continuous Cross stitching
stitching and backtacking. Equipped
Whipstitching
Direct Parameter No. Call-up Function XC-GMFYCE-20-05 *1 550W Single-phase 200 to 240V with step sequence, simple sequence
: Needle positioner function : Thread trim function
and computer communication
Previously it was necessary to select the respective mode to perform settings when making changes to the parameters, however, by using the G10 or functions (when connected to control
G500-Y control panel, it is now possible to call up the required parameter in a single operation. It is also possible to call up parameters for each mode. Three/single-
XC-GMFY-20-05 550W *2 200 to 240V panel). Equipped with 8 solenoid
phase
drive outputs, 2 electromagnetic
S6L. Logic switching for thread trim safety signal S6 0032 valve outputs, 1 small-signal output
Three/single-
Parameter Parameter
Setup Setup

AT. Automatic operation 0033 XC-GMFY-20-07 750W 200 to 240V and 14 input terminals including a
phase *2
TL. 0034 variable voltage input.
M A B C D M A B C D
Thread trim prevention signal 1-2 8L 1-2 8L

[Ex.] Checking parameter "AT" call-up

Shift Enter Shift Enter
XG-G10 XG-G10

No. "33" from list. No. Single Motor

Selection Operation Power supply
Call-up Model Output Tapered shaft
Phase Voltage
XL-G554-10(Y) Single-phase 100 to120V 550W Tapered shaft
XL-G554-20(Y) Three/single-phase *2 200 to 240V 550W Tapered shaft

User-Friendly Functions XL-G754-20(Y) Three/single-phase *2 200 to 240V 750W Tapered shaft

*1: Type [XC-GMFYCE] is CE marking type.

Computer Interface Standard Equipment *2: Please refer to the instruction manual for details of the connection method.

Settings data control including batch writing, reading and saving of settings can be performed using the setup software. (XCG_SET)
Step sequence creation, editing, etc. can be performed using the dedicated step sequence software. (XCG_STEP) Control Panel Compatibility

Multi-Function, Interchangeability
Full Functionality Interchangeability XC-G500-Y control panel
XC-G500-Y control panel
XC-E
The G Series retains all the operability and multi-functionality The XC-KE-01P detector, XC-FM-2, and LE-FA presser foot XC-G (settings backup capacity : 2 machines)
of the XC-F Series! The control box uses the same lifter units, and XC-CVS-3 variable speed pedal can all be used XC-F
connectors as the XC-F Series, enabling easy connection. as is. The XL-554 motor can be used with an optional
Control Control
The settings data save function has been expanded to attachment bracket. box box
enable saving of settings data from 1 model to 2 models.
A parameter change difference display has been added. (A
Control Panel XC-G10 control panel XC-G10 control panel
flashing dot (.) displays at the changed parameter.) XC-G10 and XC-G500-Y Series control panels are available. (No settings backup function)

2 types of function setting can now be performed with a The existing operation panel can be attached to and removed
single input. from the XC-G10 Series control panel. Significant
enhancements have been made to the operability of the
XC-G500-Y Series control panel over existing functionality
Function 1 XC-E500-Y control panel
(XC-E500-Y), and the settings data memory has been doubled. XC-E500-Y control panel
(settings backup capacity : 1 machines) (settings backup capacity :1 machines)
Input Function 2 [Expanded]
Note : There are restrictions on the settings backup function
 Mitsubishi Industrial Sewing Machine AC Servo
Dimensions
Motor and Control Box 32
Position Detector XC-KE-01P
187 10 0.2 13
56 15 10 42
33 121 33 A
0
4N9 -0.030
13 +0.5
10 13
Mitsubishi Industrial Sewing Machine AC Servo
0
14.5 2-M6 screw 120°
6

1
102

28
3.5 +0.
36
66

46
40
8.5
11.2
M10 screw
A A-A

13

96
50
19 3 6.2

22.2 +0.073
+0.040
159 57 28.5

68
Tapered shaft

278.5 Lead wire

221 85.5 74 Length:0.3m 46
12

Pulley center
Lead wire
Length:0.95m
Pulley cover

120
Lever unit
104

Adaptor for position detector attachment

Screw-in type

251

22.2 +0.015
+0.036
181
35
20

21.3
2 8 2

14

16
284
330 107
White : SM11/32 threads 28 (Brother, Mitsubishi Series)
342 132
Yellow : SM5/16 threads 24 (Juki, Toyota, Singer Series)

Specifications
Power supply 100V to 120V 200V to 240V 200V to 240V
Motor model XL-G554-10(Y) XL-G554-20(Y) XL-G754-20(Y)
Control box model XC-GMFY-10-05 XC-GMFY(CE)-20-05 XC-GMFY-20-07
Rated output 550W 750W
Rated speed 3,600rpm
Rated torque 1.47N • m(0.15kg • m) 1.96N • m(0.2kg • m)
Speed control range 70rpm to 8,999rpm
Machine axis Shipping setting (250rpm to 4,000rpm)
Motor axis 50rpm to 3,600rpm
Detector XC-KE-01P
Ambient temperature 5°C to 40°C
Environment Ambient humidity 30%RH to 95%RH (no condensation)
Max. altitude above sea-level 1,000m
Motor : 6.9kg (net), 9.1kg (gross)
Mass
Control box : 3.5kg (net), 6.9kg (gross)
L : 490mm x W : 402mm x H : 227mm "Carton box"
Packaging style
(When motor and control box are packaged as set)

In order to properly and safely utilize the sewing machines mentioned in this brochure, before
Safety Caution starting the operation, please make sure to read the related instruction manuals.

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
http://www.mtco-web.co.jp/misin/index_e.htm

New publication, effective Aug. 2015.

1508 (MEE) Printed in Japan Specifications are subject to change without notice.