Fortiap v6.0.5 Release Notes
Fortiap v6.0.5 Release Notes
Fortiap v6.0.5 Release Notes
Version 6.0.5
FORTINET DOCUMENT LIBRARY
https://docs.fortinet.com
FORTINET BLOG
https://blog.fortinet.com
NSE INSTITUTE
https://training.fortinet.com
FORTIGUARD CENTER
https://fortiguard.com/
FEEDBACK
Email: [email protected]
Change log 4
Introduction 5
Supported models 5
What's new in FortiAP version 6.0.5 5
Upgrade information 6
Upgrading from FortiAP version 6.0.0 6
Downgrading to previous firmware versions 6
Firmware image checksums 6
Supported upgrade paths 6
Product integration support 7
Resolved issues 8
Known issues 9
Introduction
This document provides the following information for FortiAP version 6.0.5, build 0037:
l Supported models on page 5
l What's new in FortiAP version 6.0.5 on page 5
l Upgrade information on page 6
l Product integration support on page 7
l Resolved issues on page 8
l Known issues on page 9
For more information about your FortiAP device, see the FortiWiFi and FortiAP Configuration Guide.
Supported models
Models
FAP-14C
FAP-21D, FAP-24D, FAP-25D
FAP-112D
FAP-221C, FAP-222C, FAP-223C, FAP-224D
FAP-320C, FAP-321C
Upgrade information
FortiAP 6.0.5 supports upgrading from FortiAP 6.0.0 and later 6.0 patches.
FortiAP 6.0.5 supports downgrading to FortiAP 6.0.0 and later 6.0 patches.
To get the MD5 checksum code for a Fortinet firmware image, perform the following steps:
1. Go to the Fortinet Support website.
2. Log in to your account. If you do not have an account, create one and then log in.
3. From the top banner, select Download > Firmware Image Checksums.
4. Enter the image file name, including the extension. For example, FAP_221C-v6-build0030-FORTINET.out.
5. Click Get Checksum Code.
To view all previous FortiAP versions, build numbers, and their supported upgrade paths, see the Fortinet
Documentation website.
The following table lists product integration and support information for FortiAP version 6.0.5:
Other web browsers may work correctly, but Fortinet does not support them.
FortiExplorer Lite (iOS) 2.1.0 (models FAP-21D, FAP-24D, FAP-112D, and FAP-320C only)
We recommend that the FortiAP firmware version be matched with the respective FortiOS
version, when available. Other variations of FortiOS and FortiAP versions may technically
work for the lowest common feature set. However, if problems arise, Fortinet Support will ask
that the versions be matched, as recommended, before troubleshooting.
Resolved issues
The following issues have been resolved in FortiAP version 6.0.5. For inquiries about a particular bug, visit the Fortinet
Support website.
Bug ID Description
531629 The accounting start packet is not sent when the authenticated station reconnects to
the CMCC captive portal SSID.
533332 The DHCP discover packet sometimes does not contain the parameter request list
option.
536637 To reduce the memory usage, FortiAP no longer stores rogue AP data and rogue STA
data received from FortiGate.
537569 FAP-221C, FAP-223C, and FAP-321C should not send Pause frames to the peer switch
port.
545800 When IEEE 802.11r, 802.11k, or 802.11v is configured, FortiAP SSID disables local
authentication.
554117 FortiAP to support the fully qualified domain name (FQDN) in the system name of the
LLDP feature.
Known issues