IPS CARBON STEEL PIPE – GROOVED COUPLINGS 06.

05
VICTAULIC® IS AN ISO 9001 CERTIFIED COMPANY

Style 75 Coupling

PRODUCT DESCRIPTION
Style 75 is available where moderate pressures are expected or weight considerations are a factor. Up to
50% lighter in weight than the Style 77, the Style 75 coupling is recommended for service up to 500 psi
(3450 kPa) depending on size. Housings are cast in two identical pieces in all sizes. Hot-dip galvanized
and special coatings are available for all sizes.

UL
®
ULC
FM

See Victaulic
publication 10.01
for details.

Exaggerated for clarity

DIMENSIONS
Y Z Max. Max. Allow. Deflect. Fr. @ Dimensions Aprx.
Pipe Size Work End Pipe CL † Bolt/Nut Inches/millimeters Wgt.
Nominal Actual Pres. Load End † Per Pipe No. - Size Each
Diameter Out. Dia. PSI* Lbs.* Sep. Cplg. In./Ft. Inches Lbs.
X In./mm In./mm kPa N In./mm Deg. mm/m mm X Y Z kg
1 1.315 500 680 0 - 0.06 0.57 2.38 4.27 1.77 1.3
25 33,4 3450 3025 0 - 1,6
2° – 43′ 48 2 - 3/8 X 2 61 108 45 0,6
11/4 1.660 500 1080 0 - 0.06 0.45 2.68 4.61 1.77 1.4
32 42,2 3450 4805 0 - 1,6
2° – 10′ 38
2- 3/
8 X2 68 117 45 0,6
11/2 1.900 500 1,420 0 - 0.06 0.40 2.91 4.82 1.77 1.5
40 48,3 3450 6320 0 - 1,6
1° – 56′ 33
2 - 3/8 X 2 74 122 45 0,6
2 2.375 500 2,215 0 - 0.06 0.32 3.43 5.22 1.88 1.7
50 60,3 3450 9860 0 - 1,6
1° – 31′ 26 2- 3/
8 X2 87 133 48 0,8
21/2 2.875 500 3,245 0 - 0.06 0.26 3.88 5.68 1.88 1.9
65 73,0 3450 14440 0 - 1,6
1° – 15′ 22
2 - 3/8 X 2 98 144 48 0,9
3.000 500 3,535 0 - 0.06 0.26 4.00 5.90 1.88 1.9
76,1 mm 76,1 3450 15730 0 - 1,6
1° – 12′ 22 2- 3/
8 X2 102 150 48 0,9
3 3.500 500 4,800 0 - 0.06 0.22 4.50 7.00 1.88 2.9
80 88,9 3450 21360 0 - 1,6
1° – 2′ 18 2- 1/
2 X 23/4 114 178 48 1,3
31/2 4.000 500 6,300 0 - 0.06 0.19 5.00 7.50 1.88 2.9
90 101,6 3450 28035 0 - 1,6
0° – 54′ 16
2 - 1/2 X 23/4 127 191 48 1,3
4 4.500 500 7,950 0 - 0.13 0.34 5.80 8.03 2.13 4.1
100 114,3 3450 35380 0 - 3,2
1° – 36′ 28 2 - 1/
2 X 23/4 147 204 54 1,9
4.250 450 6,380 0 - 0.13 0.35 5.55 7.79 2.13 3.7
108,0 mm 108,0 3100 28395 0 - 3,2
1° – 41′ 29
2 - 12 X 70.0 141 198 54 1,7
41/2 5.000 450 8,820 0 - 0.13 0.25 6.13 9.43 2.13 5.5
120 127,0 3100 39250 0 - 3,2
1° – 26′ 21
2- 5/
8 X 31/4 156 240 54 2,5
5 5.563 450 10,935 0 - 0.13 0.27 6.88 10.07 2.13 5.8
125 141,3 3100 48660 0 - 3,2
1° – 18′ 23 2 - 5/8 X 31/4 175 256 54 2,6
5.250 450 9,735 0 - 0.13 0.28 6.55 9.37 2.13 6.0
133,0 mm 133,0 3100 43325 0 - 3,2
1° – 21′ 24
2 - 16 X 82.5 166 238 54 2,7
5.500 450 10,665 0 - 0.13 0.28 6.80 9.59 2.13 6.3
139,7 mm 139,7 3100 47460 0 - 3,2
1° – 18′ 24 2- 5/
8 X 31/4 173 244 54 2,9
6.000 450 12,735 0 - 0.13 0.21 7.38 10.48 1.88 6.2
152,4 mm 152,4 3100 56670 0 - 3,2
1° – 12′ 18 2 - 5/8 X 31/4 187 266 48 2,8
6 6.625 450 15,525 0 - 0.13 0.23 8.00 11.07 2.13 7.0
150 168,3 3100 69085 0 - 3,2
1° – 5′ 18 2- 5/
8 X 31/4 203 281 54 3,2
Table continued on page 2. *† @ Refer to notes on page 2.

® REGISTERED TRADEMARK OF VICTAULIC – © COPYRIGHT 2003 VICTAULIC – PRINTED IN U.S.A. 1470 REV F

Victaulic Company of America • Phone: 1-800-PICK-VIC (1-800-742-5842) • Fax: 610-250-8817 • e-mail:[email protected]

Victaulic Company of Canada • Phone: 905-884-7444 • Fax: 905-884-9774 • e-mail: [email protected]
Victaulic Europe • Phone:32-9-381-1500 • Fax: 32-9-380-4438 • e-mail: [email protected] R

Victaulic America Latina • Phone: 610-559-3300 • Fax: 610-559-3608 • e-mail: [email protected]

Victaulic Asia Pacific • Phone: 65-6235-3035 • Fax: 65-6235-0535 • e-mail: [email protected]
06.05

DIMENSIONS
Y Z Max. Max. Allow. Deflect. Fr. @ Dimensions Aprx.
Pipe Size Work End Pipe CL † Bolt/Nut Inches/millimeters Wgt.
Nominal Actual Pres. Load End † Per Pipe No. - Size Each
Diameter Out. Dia. PSI* Lbs.* Sep. Cplg. In./Ft. Inches Lbs.
X In./mm In./mm kPa N In./mm Deg. mm/m mm X Y Z kg
6.250 450 13,800 0 - 0.13 0.24 7.63 10.49 2.13 6.8
159,0 mm 159,0 3100 61405 0 - 3,2
1° – 9′ 20
2 - 16 X 82.5 194 266 54 3,1
6.500 450 14,940 0 - 0.13 0.23 7.84 10.66 2.06 7.2
165,1 mm 165,1 3100 66483 0 - 3,2
1° – 6′ 19 2 - 5/8 X 31/4 199 271 52 3,3
8.000 450 22,635 0 - 0.13 0.16 9.72 13.33 2.31 12.6
203,2 mm# 203,2 3100 100725 0 - 3,2
0° – 54′ 13 2- 3/
4 X 41/4 247 339 58 5,7
8 8.625 450 26,280 0 - 0.13 0.18 10.34 13.97 2.32 12.4
200 219,1 3100 116945 0 - 3,2
0° – 50′ 14 2 - 3/4 X 41/4 263 355 59 5,6
10.000 350 27,500 0 - 0.13 0.15 12.16 15.81 2.53 20.8
254,0 mm# 254,0 2400 122375 0 - 3,2
0° – 43′ 11 2- 7/
8 X 51/2 309 402 64 9,4
12.000 350 39,500 0 - 0.13 0.13 7/ 14.16 17.69 2.53 23.6
304,8 mm# 304,8 2400 175775 0 - 3,2
0° – 36′ 9 2- 8 X 51/2 360 449 64 10,7
# Style 74 Couplings *†@ Refer to notes below.

MATERIAL SPECIFICATIONS
Housing: Ductile iron conforming to ASTM A-536, grade 65-45-12.
Housing Coating: Orange enamel
• Optional: Hot dipped galvanized and others.
Gasket: (specify choice*)†
• Grade “E” EPDM
EPDM (Green color code). Temperature range –30°F to +230°F (–34°C to +110°C). Recommended for
hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and
many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86°F (+30°C) and
hot +180°F (+82°C) potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.
• Grade “T” nitrile
Nitrile (Orange color code). Temperature range –20°F to +180°F (–29°C to +82°C). Recommended for
petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature
range; except hot, dry air over +140°F (+60°C) and water over +150°F (+66°C). NOT RECOMMEND-
ED FOR HOT WATER SERVICES.
*Services listed are General Service Recommendations only. It should be noted that there are services for
which these gaskets are not recommended. Reference should always be made to the latest Victaulic
Gasket Selection Guide for specific gasket service recommendations and for a listing of services which
are not recommended.
†Supplemental lubricant is recommended for services installed at or continuously operating below 0°F
(–18°C).
Bolts/Nuts: Heat treated carbon steel, zinc plated to ASTM B-633, track-head conforming to physical
properties of ASTM A-183 minimum tensile 110,000 psi (758340 kPa).

NOTES
* Working Pressure and End Load are total, from all internal and external loads, based on standard weight (ANSI) steel pipe, standard roll or cut grooved in accordance with
Victaulic specifications. Contact Victaulic for performance on other pipe.
WARNING: FOR ONE TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 1 1/2 times the figures shown.
† Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for standard roll grooved pipe.
Figures for standard cut grooved pipe may be doubled. These figures are maximums; for design and installation purposes these figures should be reduced by: 50% for 3/4 -
31/2" (20 - 90 mm); 25% for 4" (100 mm) and larger.
@ Number of bolts required equals number of housing segments.
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request. Contact Victaulic for details.
WARNING: Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic piping products.
This product shall be manufactured by Victaulic Company. All products shall be installed in accordance with current Victaulic installation/assembly instructions.
Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.

2 Style 75 Coupling