PSU-AC-32 Unit Description
Description
68/1551-LZA 701 0001 Uen B
Copyright
© Copyright Ericsson AB 2006, 2009. All Rights Reserved.
Disclaimer
No part of this document may be reproduced in any form without the written
permission of the copyright owner.
The contents of this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use
of this document.
68/1551-LZA 701 0001 Uen B | 2009-04-06
Contents
Contents
1 PSU-AC-32 Unit Description 1
1.1 Product Overview 1
1.2 Size and Weight 2
1.3 Power Consumption and Heat Generation 2
1.4 Function Description 2
1.5 Interfaces 2
68/1551-LZA 701 0001 Uen B | 2009-04-06
PSU-AC-32 Unit Description
68/1551-LZA 701 0001 Uen B | 2009-04-06
PSU-AC-32 Unit Description
1 PSU-AC-32 Unit Description
The PSU-AC-32 is a variant of the PSU-AC, which is a type of Power Supply
Unit (PSU) that converts AC to DC.
PSU
AC-32
OUTPU
T
+27.2 VD
C
1200-150
0W
Fault
Opera
tional
EPC bu
s fault
EPC bu
s out
EPC bu
s in
INPU
T
120-2
50/6 50 VAC
0 Hz
P016750A
Figure 1 PSU-AC-32
1.1 Product Overview
The PSU-AC converts incoming AC power to +24 V DC power, with a maximum
output of 1500 W.
68/1551-LZA 701 0001 Uen B | 2009-04-06 1
PSU-AC-32 Unit Description
1.1.1 Main Functions
The PSU-AC:
• Communicates with the Distribution Switch Unit (DXU)
• Supplies system power to the RBS
• Indicates faults
1.2 Size and Weight
The table below shows the size and weight of the PSU-AC.
Table 1 Size and Weight
Height Width Depth Weight
262 mm 61 mm 225 mm 3.5 kg
1.3 Power Consumption and Heat Generation
The table below shows the power consumption and heat generation of the
PSU-AC.
Table 2 Power Consumption and Heat Generation
Maximum Power Consumption Maximum Heat Generation
1850 W 350 W
1.4 Function Description
The PSU-AC converts incoming AC power to stabilized +24 V DC power. It can
operate in parallel with other PSUs to share loads and increase power.
The PSU-AC communicates with the DXU through an RS-485 bus.
1.5 Interfaces
1.5.1 Signal and Power Interfaces
Input Power Characteristics
The table below shows the input power characteristics of the PSU-AC.
2 68/1551-LZA 701 0001 Uen B | 2009-04-06
PSU-AC-32 Unit Description
Table 3 Input Power Characteristics
Characteristic Description
Nominal input voltage 120–250 V AC
Frequency 45–65 Hz
Non-destructive voltage 0–275 V AC
Output Power Characteristics
The table below shows the output power characteristics of the PSU-AC.
Table 4 Output Power Characteristics
Characteristic Description
Default output voltage +27.2 V DC
Voltage range +22.0 to +29.0 V DC
Output power 1500 W
Connectors
The table below shows the connectors for the PSU-AC.
Table 5 Connectors
Function Type
Power output 2-pole DC power connector
Alarm/control bus RJ-45
Power input 3-pole AC power connector
Note: The PSU-AC has no backplane connections.
1.5.2 Operator Interface
Indicators
The table below shows the indicators of the PSU-AC.
Table 6 Indicators
Indicator Color
Fault Red
Operational Green
EPC bus fault Yellow
68/1551-LZA 701 0001 Uen B | 2009-04-06 3
