Scribd
Upload
8K views3 pages

Codigo Error FX1006-5

This document provides service information for measuring the engine oil level (SE2205) and temperature (SE2202) for an EC220D L Volvo engine. It lists the tools needed and describes the function and references for the measurements. Measurement procedures are outlined for SE2202, including correct resistance values at different oil temperatures. Measurement procedures are also described for SE2205, noting the correct resistance value is 12 ohms at normal oil level and 25°C temperature.

Uploaded by

CEVegaO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8K views3 pages

Codigo Error FX1006-5

This document provides service information for measuring the engine oil level (SE2205) and temperature (SE2202) for an EC220D L Volvo engine. It lists the tools needed and describes the function and references for the measurements. Measurement procedures are outlined for SE2202, including correct resistance values at different oil temperatures. Measurement procedures are also described for SE2205, noting the correct resistance value is 12 ohms at normal oil level and 25°C temperature.

Uploaded by

CEVegaO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Información de servicio

Título de documento: Grupo funcional: Tipo de información: Fecha:


FX1006, description and 302 Información de servicio 3/8/2021
measuring
Perfil:
EC220D L Volvo

FX1006, description and measuring


Mostrando el perfil seleccionado

Válido para números de serie


Modelo: Lugar de producción Inicio de número de fabricación Parada de número de fabricación
EC220D L Volvo Pederneiras 240001 250000

Op nbr 302-290

Tools:
9990014 Break out harness
9998699 Adapter
9990062 Cable
88890074 Multimeter
9998534 Break out harness

Description

Function Measures the engine oil level (SE2205) and temperature (SE2202)
References Wiring diagram SCH04
VCADS Pro Test

Figure 1

EA31, signal
EA11, ground
EB3, signal oil level +
EB4, signal oil level –

Measuring SE2202

Measuring point Correct value Condition Test method


2–4 ≈ Resistance according
to the graph below

≈5V
4–

≈∞Ω
4–

≈0Ω
2–

EA11 – 2 ≈0Ω
EA31 – 4

Verifying SE2202

Measuring point Correct value Condition Test method


EA31 – EA11 ≈ Resistance according
to the graph below

SE2202 resistance values

Oil temp (° C) Oil temp (° F) Resistance


0 32 1.00 kΩ
20 68 1.08 kΩ
60 140 1.24 kΩ
80 176 1.34 kΩ
100 212 1.40 kΩ
120 248 1.47 kΩ

Measuring SE2205

Measuring point Correct value Condition Test method


1–3 ≈ 12 Ω (a)
≈∞Ω
1–

3–

EB4 – 1 ≈0Ω
EB3 – 3

Verifying SE2205

Measuring point Correct value Condition Test method


EB3 – EB4 ≈ 12 Ω (a)

(a) at normal oil level and oil temperature 25°C (77°F)

You might also like