FB Tank Level Indicator

Industrial series

tank level indicators are easy to install, and offer a eco-

nomical solution where a reliable mechanical liquid level indicator is required
on bulk storage tanks operating under atmospheric or low pressure. The sys-
tem is assembled on-site, and installed to both new and existing tank instal-
lations.

● Durable Aluminium powder coated gauge board in white with black

graduations and numbers
● Level indication in centimetres and accurate to 5cm.
● Guided float as standard. Unguided float available on request

The FB system consists of a float connected to a an external tank level indica-

tor via a cord and a set of pulleys. The indicator has nylon roller glides which
enables the indicator to ride smoothly up and and down the gauge board
which is positioned parallel to the tank. The float accurately follows the liquid
variations in the tank. The horizontal float movement is restricted by two
guide wires firmly anchored to the tank base. When the indicator as at the
top position when the tank is empty and the bottom position when the tank
is full. The gauge board is supplied in 1 metre lengths and multiple gauge
board are connected by bracket joiners as per the ordered measuring range.

TECHNICAL SPECIFICATION

Range Guided upto 7.5 mtr with 200mmᴓ float and 15 mtr
with 350mmᴓ float
Travel Full range
Graduations 5 mm
Max Temperature 150°C stainless steel, 80°C Polypropylene
Max Pressure Atmospheric
Float SS304/SS316
Float cord/ wire SS304/SS316 x 1.6mmᴓ multistrand, PP x 3mmᴓ
Calibrated gauge board 150mm wide (6”) aluminium powder coating with
black/red graduations and numbers
Level Indicator Red powder coated steel with cord fastener
Protection conduit Vertical and horizontal pipe in galvanised steel pipe
Vertical pipe - 20NB x 285mm & 295mm (2 No:s)
Horizontal pipe - 20NB x 650mm long (1 No)
Pulley Elbow Cadmium plated steel with PTFE bush and stainless
steel shaft housed in weatherproof enclosure
Guide Wire Tensioners Cadmium plated steel spring housed in CS
Float Anchor 1 weldable SS304/SS316 plate 25mm x 6mm thick
Additional Information to be provided by customer:
Float cord fixings SS304/SS316
Range x service liquid x temperature x pressure. For
information on the CR LiquiLevel series of chemical Gauge brackets Powder coated steel
resistant system, please contact our sales or technical Alarm (optional) Micro-switch - 5A 230 V in ABS enclosure (IP65)
department.

Nikeson HB | Nitgatan 11 | SE-333 33 | Smålandsstenar | Sweden. Tel: ++46 371 390110

 Components & Sub Assemblies

Gauge Board Float (SS316 or SS304 or PP) Pointer Protection conduit with Elbow pulleys Seal pot
Rope Elbow Pulleys
guide
Rope connector
10 H.Limb
PP Rope
20 H
Knotted on V.Limb
30 float connector
L = 1 m tr

Seal
40 Flange pot

50
Tensioner Gauge bracket Anchor
60
SS (weldable)
70 SS Rope
Tension
Rope fastener spring
80 Knob L
Eyebolt for SS rope 115
90
Rope guide Flange L+50
150
Float Spring L= Float dia +100mm
LC = 5mm Tension rod

Installation Components to be fabricated by ‘customer’

ASSEMBLY & INSTALLATION Fig. 1
Guide/tank connection Conduit support Gauge bracket
support
300 1"x1"x1/4"
150 50 25
20NB ANSI Ø10x2 Nos MS Angle
150 # RF
150 20NB, Pipe Ø7x2 Nos

75 25
1"x1"x1/4"
MS Angle 110

Model Identification

FB: X Range
(mm)

Guided G
Unguided C

SS 304 x Ø200mm N1
SS 304 x Ø350mm N2
SS316 x Ø200mm S1
GUIDED CONSTRUCTION Fig. 2 GUIDED CONSTRUCTION Fig. 3
WITH FULL TRAVEL WITH HALF TRAVEL
SS316 x Ø350mm S2
PP x Ø200mm P1
PP x Ø350mm P2

50mm WC 1
200mm WC 2
Without w

Adjustable Microswitch x 1 1
Adjustable Microswitch x 2 2
Without w

Ground Level Tank G

Under Ground Tank (Sump) U
Overhead Tank H

Nikeson HB | Nitgatan 11 | SE-333 33 | Smålandsstenar | Sweden. Tel: ++46 371 390110. [email protected]. www.liquilevel.com