Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Technical Datasheet Qoc With Sectors: Product Information

    Uploaded by

    Arter Pandaan
    This technical datasheet provides information on QOC valves with sectors. QOC valves can range in size from 6 to 68 inches and are designed to ASME VIII Div. 1/Div. 2 or EN 13445 codes with maximum pressure ratings up to ANSI 2500. Materials include carbon steel, stainless steel, duplex, and super duplex for hubs and doors. QOC valves can operate at temperatures between -46°C to +350°C in horizontal or vertical orientations. Certification and non-destructive testing is in accordance with EN 10204 and ASME standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Datasheet Qoc With Sectors: Product Information

    Uploaded by

    Arter Pandaan
    66 views1 page
    This technical datasheet provides information on QOC valves with sectors. QOC valves can range in size from 6 to 68 inches and are designed to ASME VIII Div. 1/Div. 2 or EN 13445 codes with maximum pressure ratings up to ANSI 2500. Materials include carbon steel, stainless steel, duplex, and super duplex for hubs and doors. QOC valves can operate at temperatures between -46°C to +350°C in horizontal or vertical orientations. Certification and non-destructive testing is in accordance with EN 10204 and ASME standards.

    Original Title

    DS-sector1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical datasheet provides information on QOC valves with sectors. QOC valves can range in size from 6 to 68 inches and are designed to ASME VIII Div. 1/Div. 2 or EN 13445 codes with maximum pressure ratings up to ANSI 2500. Materials include carbon steel, stainless steel, duplex, and super duplex for hubs and doors. QOC valves can operate at temperatures between -46°C to +350°C in horizontal or vertical orientations. Certification and non-destructive testing is in accordance with EN 10204 and ASME standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views1 page

    Technical Datasheet Qoc With Sectors: Product Information

    Uploaded by

    Arter Pandaan
    This technical datasheet provides information on QOC valves with sectors. QOC valves can range in size from 6 to 68 inches and are designed to ASME VIII Div. 1/Div. 2 or EN 13445 codes with maximum pressure ratings up to ANSI 2500. Materials include carbon steel, stainless steel, duplex, and super duplex for hubs and doors. QOC valves can operate at temperatures between -46°C to +350°C in horizontal or vertical orientations. Certification and non-destructive testing is in accordance with EN 10204 and ASME standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TECHNICAL DATASHEET QOC WITH SECTORS

    Product Information
    QOC Nominal Size From 6” to 68”

    QOC Design Code ASME VIII Div. 1 / Div. 2 / EN 13445

    QOC Design Pressure Rating Up to ANSI 2500

    QOC Design Temperature (min/max) -46°C /+350°C

    QOC Orientation Horizontal/Vertical

    Gasket Seal O-Ring/Lip seal


    Design Conditions
    Design Code ASME VIII Div. 1 Yes
    Code stamped 
    Vessel Wall Thickness Acc. to the vessel
    Vessel PWHT 
    NACE Compliance (MR0175/ISO15156) 
    Principal Materials
    Hub Material Carbon steel/Stainless Steel/Duplex/Super Duplex

    Door Material Carbon steel/Stainless Steel/Duplex/Super Duplex

    Gasket Seal NBR/HNBR/VITON/KALREZ

    Hinge/Davit Material Carbon Steel / Stainless Steel

    Pressure Warning Screw Material Stainless Steel

    Pressure Warning Screw Seal Material HNBR


    Certification
    Material Certification Acc. to EN 10204 2.2/ 3.1/3.2
    Non-Destructive Testing
    M.P.I. On Weld End Preparation 
    Dye Penetrant onWeld End Preparation 
    Ultrasonic Examination Yes
    Other Requirements
    Inspection Requirements 
    ASME U/U2 - Stamp Partial 
    CE Marking 
    Finish rough machined N.A.

    Finish (std) Sandblasted and coated with zinc rich epoxy primer
    Weld Overlay Material 
    Nickel plating 
    Final painting according to specification 
    Cold galvanizing N.A.

    Teflon coating N.A.


    Mechanical Key Interlock 

    *  = APPLICABLE AT REQUEST

    You might also like