Scribd
Upload
58 views4 pages

LON Multisensor ILA-22 (42320-105) : Date: 16.05.2007 Changes Possible Page 1 of 4

The LON Multisensor ILA-22 (42320-105) is a combination occupancy sensor, light sensor, and IR receiver that is used to control lighting, shading, HVAC, and other room functions. It detects movement within a radius of up to 14 meters when mounted 2.5 meters high, measures light levels from 10-1000 lux, and receives signals from an IR remote control. The sensor mounts flush or surface mounted and connects to the LON network to trigger automation responses based on occupancy and light.

Uploaded by

bluesier
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views4 pages

LON Multisensor ILA-22 (42320-105) : Date: 16.05.2007 Changes Possible Page 1 of 4

The LON Multisensor ILA-22 (42320-105) is a combination occupancy sensor, light sensor, and IR receiver that is used to control lighting, shading, HVAC, and other room functions. It detects movement within a radius of up to 14 meters when mounted 2.5 meters high, measures light levels from 10-1000 lux, and receives signals from an IR remote control. The sensor mounts flush or surface mounted and connects to the LON network to trigger automation responses based on occupancy and light.

Uploaded by

bluesier
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

LON Multisensor ILA-22 (42320-105)

______________________________________________________________________

Description

. • combination of occupancy sensor, light sensor and IR receiver


. • IR receiver for control of various room functions (in combination with
. IR Remote Control, art. no. 42083-107)
. • flush-mounting (surface-mounting in combination with Surface Mounting Box,
. art. no. 42020-106)
. • circular sensor range with a diameter of approx. 14 m at 2.5 m mounting height
. • detection range: 360 degrees
. • several detection levels with over all 544 control segments in 136 zones
. • illumination sensor for daylight-dependent light control, sensor range: 10 .. 1,000Lux
. • dimensions of surface-mounted sensor: 105 x 42.6 mm (D x H)
. • software application to translate the detected movements (according to LonMark profile
“Occupancy Sensor (1060)” and “Occupancy Controller (3071)”), resp. the detected illumination
(LonMark profile “Light Sensor (1010)”) into LON messages for occupancy-dependent light or
sunblind control as well as for control of room functions (LonMark profile “Switch (3200)” and
“Scene Panel (3250)”) by use of the received IR signals

Date: 16.05.2007 Changes possible Page 1 of 4


LON Multisensor ILA-22 (42320-105)

______________________________________________________________________

Function
Installed on the ceiling of a room, the Multi-sensor registers the presence
of persons
within a certain detection area and simultaneously measures the intensity
of the natural light.
Furthermore a built-in infrared receiver is integrated.
The Multi-sensor is used to control lighting, blinding, heating, ventilation
and air-conditioning applications.

The integrated movement detector is based on the "Passive Infrared


Method" (PIM).
It detects the difference of thermal radiation (infrared spectrum) of moving objects.
The size of the detection area depends on the room height, e. g. an installation height of 2.5 m
results a detection area with a diameter of 14 m on the ground.
It is partitioned into radial levels with over all 544 switching sectors in 136 zones.

The integrated brightness sensor measures permanently the lux level in a range of 10 .. 1.000 lux
and propagates the values to the LON network.
It can be used for a constant light control by regulating of the room brightness.

By means of the IR Remote Control (part-no.: 42083-107) up to 10 network channels of the Multi-
sensor can be remotely controlled.

Mounting
The Multi-sensor is for flush-mounted installations in interior rooms.
In combination with the Surface Mounting Box for Multi-sensors (part-no.: 42020-106) it can also
be mounted to ceilings which have not been suspended.

Usually the Multi-sensor is fixed to a 60 mm flush-mounted box.


The base plate supplied with the Multi-sensor is fixed with two screws to a 60 mm flush-mounted
box or to the surface-mounted Surface Mounting Box for Multi-sensors.
The Multi-sensor is connected via a bus terminal clamp and clipped onto the base plate.

There is only the LON link power required to supply the device.

The network is connected via a 2-pole pluggable bus terminal included in delivery which
allows up to 4 pairs of wires to be connected.
The terminal is suited for conductor cross-sections of 0.6 .. 0.8 mm².

The Multi-sensor propagates its Neuron-ID by pressing the service pin.


The service LED indicates the programming state.

For the right operation of the Multi-sensor an appropriate application program is needed, which
is provided by SVEA free of charge (part-no.: 92091-059).
It can be also directly downloaded from the SVEA website (www.svea-bcs.de).

Date: 16.05.2007 Changes possible Page 2 of 4


LON Multisensor ILA-22 (42320-105)

______________________________________________________________________

Remarks
Installation and assembly of electrical devices may take place only by an electrical specialist.
When planning and installation of electrical system the relevant standards, guidelines and
regulations of the respective country are to be considered. Beyond that the device specifications
are to be kept. For project engineering, assembly and line-up detailed expertise of the LonWorks
technology is presupposed.
The function of the device is software dependent. Only application programs may be loaded,
which are approved by SVEA for this device.
The system integrator has to carry ensuring that the loaded application program and the
configured parameters in it correspond with the outside wiring of the device. This applies in
particular if for different use several application programs for a device are available.

Date: 16.05.2007 Changes possible Page 3 of 4


LON Multisensor ILA-22 (42320-105)

______________________________________________________________________

Technical Data
Power supply
Power consumption (max.): <= 285 mW (1 LPU) at DC 42.8 V network voltage
Network interface
Transceiver type: LON Link Power Transceiver (LPT-11)
Sensor Head
Measuring square: 360º
Scope: Radius of max. 7 m at a mounting height of 2.50 m
Number of zones: 136 with 544 Switch segments
Brightness sensor: Direct from app. 10 .. 1,000 lux
Controls
Service pin: Propagates the Neuron ID
Indicators
Service LED (red): lit: network access error
flashes: module unconfigured
Connections
Bus: 2-pole plug-in and branch terminal (Type: WAGO 243)
Housing
Protection class: IP20 (EN 60 529/IEC 144)
Mounting: Screw mounting in a flush-mounted wall socket (60mm) or by a separate
mounting socket (part-no. 42020-106)
Dimensions: Diameter: app. 100 mm Height from ceiling: app. 50 mm
Site conditions
Operating temperature: -5 °C .. +45 °C(the motion detecting is reduced at temperatures > 30 °C)
Storage / transportation temperature: -25 °C .. +55 °C
Relative humidity: 5 .. 93 % without moisture condensation
EU Directive: Low voltage guideline 73/23/EWG and EMC guideline 89/336/EWG

Date: 16.05.2007 Changes possible Page 4 of 4

You might also like